OWNER’S MANUAL
Micro Hi-Fi
Audio
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
CM2460DAB (CM2460DAB, CMS2460F)
MFL71379812
1908_Rev01
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
Getting Started
3
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
~
0
1
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
1
!
Refers to “ON” (power).
Refers to dangerous voltage.
4
Table of Contents
3
Operating
Table of Contents
14 Basic Operations
14 – CD/USB Operations
14 – Auto Play
1
Getting Started
15 Other Operations
15 – Programmed Playback
15 – Deleting Programmed list
15 – Displaying file information
(ID3 TAG)
2
6
6
7
7
7
7
8
Safety Information
Unique Features
Accessories
Playable file Requirement
– Music file requirement
– Compatible USB Devices
– USB device requirement
Remote control
16 – Searching for a folder and an MP3/WMA/
FLAC file
16 – Deleting an MP3/WMA/FLAC file
16 – Turn off the sound temporarily
17 – Sleep Timer Setting
17 – Dimmer
10 Front Panel
11 Rear Panel
17 – DEMO
17 – Auto power down
2
Connecting
18 – AUTO POWER On
18 – Auto function change
19 Using a BLUETOOTH® wireless technology
19 – Listening to music stored on the
BLUETOOTH devices
12 Connecting to speakers
12 – Connecting the speakers to the unit
13 Optional Equipment Connection
13 – USB Connection
21 Using the Music Flow Bluetooth App
21 – Install “Music Flow Bluetooth” App onto
Your Bluetooth Device
13 – PORT. IN Connection
23 Radio Operations
23 – Listening to the radio
23 – Improving poor FM reception
23 – Presetting the Radio Stations
23 – Deleting all the saved stations
24 – Seeing information about a Radio station
24 – Listening to the DAB+
24 – DAB+ scan
25 Sound adjustment
25 Advanced Operations
25 – Recording to USB
26 – To select recording bit rate and speed
27 Setting the Clock
27 – Setting the Clock through
“Music Flow Bluetooth” App
27 – Using your player as an alarm clock
28 LG Sound Sync
Table of Contents
5
4
Troubleshooting
29 Troubleshooting
1
2
3
4
5
5
Appendix
30 Main unit
31 Speakers
32 Maintenance
32 – Handling the Unit
32 – Notes on Discs
33 Trademarks and Licenses
6
Getting Started
Unique Features
Accessories
Please check and identify the supplied accessories.
BLUETOOTH
Listens to music stored on your Bluetooth device.
1
USB Direct Recording
Records music to your USB device.
Remote Control (1)
Batteries (2)
Music Flow Bluetooth
Music Flow Bluetooth is an app designed to let you
take control of some of LG’s latest audio devices.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Getting Started
7
Compatible USB Devices
Playable file
Requirement
y MP3 Player : Flash type MP3 player.
y USB Flash Drive :
Devices that support USB2.0 or USB1.1.
1
y The USB function of this unit does not support all
Music file requirement
USB devices.
MP3/WMA/FLAC file compatibility with this unit is
limited as follows.
USB device requirement
y Devices which require additional program
installation when you have connected it to a
computer, are not supported.
y Sampling frequency :
MP3 : within 8 to 48 kHz
WMA : within 8 to 48 kHz
FLAC : within 8 to 192 kHz (USB),
within 8 to 48 kHz (CD)
y Do not extract the USB device while in operation.
y For a large capacity USB, it may take a few minute
to be searched.
y Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
y To prevent data loss, back up all data.
y Maximum files : Data CD : 999 / USB : 2000
y Maximum folders : Data CD : 99 / USB : 200
y File extensions : “.mp3”/ “.wma”/ ”.flac”
y If you use a USB extension cable or USB hub, the
USB device is not recognized.
y Using NTFS file system is not supported.
(Only FAT(16/32) file system is supported.)
y Certain MP3/WMA/FLAC files may not be played
depending on the type or format of the file.
y This unit recognizes up to 2000 files.
y CD-ROM file format : ISO 9660/JOLIET
y External HDD, card readers, locked devices, or hard
type USB devices are not supported.
y We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
y USB port of the unit cannot be connected to the
PC. The unit cannot be used as a storage device.
y Support channel (FLAC) : Up to 2 channel
y Support output bit/sample (FLAC) : 24 bit
y bps (FLAC) : Up to 2.5 Mbps
y Some USB may not work with this unit.
The DTS is not supported. In case of DTS audio
format, audio is not output.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
8
Getting Started
• • • • • • • • • • • • • • a • • • • • • • • • • • • •
1(Power) : Switches the unit ON or OFF.
B(Open/Close) : Opens and closes the disc tray.
VOL +/- : Adjusts speaker volume.
Remote control
1
PRESET/FOLDER W/S:
-
Searches for a folder of MP3/WMA/FLAC files.
When a CD/USB containing MP3/WMA/FLAC
files in several folders is being played, press
PRESET/FOLDER W/Sto select the folder you
want to play.
-
Chooses a preset number for a radio station.
FUNCTION : Selects the function and input source.
@: Mutes the sound.
PROGRAM/MEMORY :
-
-
Stores radio stations.
Creates a programmed list you want to listen to.
REPEAT : Plays your tracks/files repeatedly or
randomly.
DELETE :
-
-
-
Deletes MP3/WMA/FLAC files.
Deletes a song on the programmed list.
Deletes all the saved stations.
Replacement of battery
Remove the battery cover on the rear of the remote
control, and insert the battery with 4and 5
matched correctly.
Getting Started
9
• • • • • • • • • • • • • • b • • • • • • • • • • • • •
SOUND EFFECT : Chooses sound impressions.
TUN. -/+ :
• • • • • • • • • • • • • • c • • • • • • • • • • • • •
INFO :
-
Sees information about your music. An MP3 file
often comes with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
-
-
Selects the radio stations.
Scans DAB+ stations by pressing and holding.
1
-
Sees the address of connected Bluetooth device
in Bluetooth mode.
C/V(Skip/Search) :
-
-
Skips fast backward or forward.
Searches for a section within a track/file.
DIMMER : The display windows dims over few steps.
SLEEP : Sets the system to turn off automatically at
a specified time.
d/M(Play/Pause) :
-
-
Starts or pauses playback.
Selects STEREO/MONO.
CLOCK : Sets a clock and checks a time.
Z(Stop) :
ALARM : With the ALARM function you can turn CD,
USB play and Tuner reception on at a desired time.
-
-
Stops playback or recording.
Cancels DELETE function
RDS/SET :
-
-
RDS (Radio Data System).
Confirms the setting.
DAB+ MODE :
-
-
DAB+ radio type
Selects a DAB+ display mode
USB REC : USB direct recording.
?: The button is not available for any function.
PTY : Searches radio stations by radio type. (RDS
only)
10 Getting Started
Front Panel
1
a b
c
d e
f
g
h
i
j
k
a 1/!(Power)
f Remote sensor
g Display window
h Volume Knob
Switches the unit ON or OFF.
b F
Selects the function or input source.
Adjusts volume of speaker.
c Y/U(Skip/Search)
i USB
- Searches backward or forward.
- Skips to the previous/next track/file.
Plays the audio files by connecting the USB
device.
TUNING - / +
- Selects the radio stations.
- Scans DAB+ stations by pressing and holding.
j Disc tray
k PORT. IN
Connects to a Portable device.
d T(Play/Pause)
- Starts or pauses playback.
- Selects Stereo/Mono.
e R
Opens or closes the disc tray.
Getting Started 11
Rear Panel
1
a
b
c
a DAB+/FM ANTENNA
b SPEAKERS (L/R) terminals
c POWER IN
12 Connecting
Caution
>
Connecting to speakers
y Make sure children do not put their hands or
any objects into the *speaker duct.
* Speaker duct : A hole for plentiful bass
sound on speaker cabinet (enclosure)
Connecting the speakers to the
unit
y Use the speaker supplied with this unit only.
Using any other speaker may cause
malfunction.
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
y The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
2
Connect the black of each wire to the terminals
marked - (minus) and the other end to the terminals
marked + (plus).
Color
Red
Speaker
Front R
Front L
White
Connecting 13
PORT. IN Connection
Optional Equipment
Connection
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc) to the PORT. IN connector.
USB Connection
Connect a USB device to the USB ports on the unit.
2
Portable cable
MP3 player etc.
Note
,
Listening to music from your portable
player or external device
The unit can be used to play the music from many
types of portable player or external device.
Removing the USB device from the unit.
1. Choose a different function/mode or
press Zon the remote control twice in a
row.
1. Connect the portable player to the PORT. IN
connector of the unit.
2. Remove the USB device from the unit.
2. Turn the power on by pressing 1/!.
3. Press F to select PORTABLE function.
4. Turn on the portable player or external device and
start it playing.
14 Operating
Note
,
Basic Operations
CD/USB Operations
y The display changes in the following order.
MP3/WMA/FLAC
USB
AUDIO CD
CD
1. Insert the disc by pressing Bon the remote
control or Ron the unit.
RPT 1
RPT*DIR
RPT ALL
RANDOM
OFF
RPT 1
RPT DIR
RPT ALL
RANDOM
OFF
RPT 1
-
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing
FUNCTION on the remote control or F on the
unit.
RPT ALL
RANDOM
OFF
To
Do this
*DIR : Directory
y When you play programmed list, only RPT 1
and RPT ALL are available.
Stop
Press Zon the remote control.
3
Press d/Mon the remote control
or Ton the unit.
y Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
Playback
Pause
Press d/Mon the remote control
or Ton the unit.
y If you leave the disc tray open for 5 minutes,
Searching Press and hold C/Von the
it will close automatically.
for a section remote control or Y/Uon the
within
unit during playback and release it at
a track/file the point you want to listen to.
Auto Play
-
In stop status,
AUDIO/MP3/WMA/FLAC CD is played automatically
after disc tray is open and then closed.
Press C/Von the remote
control or Y/Uon the unit to
go to the next/previous track/file.
Automatically switches to the CD function if disc tray
is open and then closed when there is no disc in tray.
-
During playback,
press Von the remote control or
Uon the unit to go to the next
track/file.
Skipping to
the next/
previous
Playing less than 3 seconds, press
Con the remote control or Y
on the unit to go to the previous
track/file.
track/file
Playing after 3 seconds, press C
on the remote control or Yon
the unit to go to the beginning of
the track/file.
Playing
Press REPEAT on the remote
repeatedly or control repeatedly. Refer to the note
randomly for details about the display change.
Operating 15
Deleting Programmed list
Deleting function only works in the edit mode.
Other Operations
1. Press PROGRAM/MEMORY on the remote
control in stop status.
Programmed Playback
The program function enables you to store your
favorite files from any disc or USB device.
2. Select a song by pressing PROGRAM/MEMORY
or PRESET/FOLDER W/Srepeatedly.
3. Press DELETE while a song is selected.
A program can contain 20 tracks/files for each media
(CD, USB). Possible to save a total of 40 tracks/files.
Note
,
1. Press PROGRAM/MEMORY on the remote
y Programmed list is cleared in the case below.
control in stop status.
-
-
Removing the disc or the USB device.
Deleting or recording music files in the USB
device.
2. Press C/Von the remote control to select
a track/file.
-
Unplugging the power cord.
3. Press PROGRAM/MEMORY to save and select a
next track/file.
y Program is switched off in the case below.
3
-
-
Changing to a different function.
Turning off and on the unit.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET/FOLDER W/Sto select the program
number.)
5. Press PROGRAM/MEMORY once again.
Displaying file information
(ID3 TAG)
To play the programmed list, press d/Mafter you
make the list.
While playing an MP3 file containing file information,
Note
you can display the information by pressing INFO.
,
When making or modifying the programmed
list, REPEAT mode is off.
16 Operating
Searching for a folder and an
MP3/WMA/FLAC file
1. Press PRESET/FOLDER W/Son the remote
control repeatedly until a desired folder appears
in the display window.
Deleting an MP3/WMA/FLAC
file
You can delete file, folder or format by pressing
DELETE on the remote control. This function is
supported only in stop status. (USB only)
2. Press d/Mto play it. The first file of the folder
1. -Select the file you want to delete and press
will be played.
DELETE on the remote control.
-Select the folder you want to delete by pressing
PRESET/FOLDER W/Son the remote control
and press DELETE on the remote control.
Note
,
y USB/CD Folders/Files are recognized as
below
-Press and hold DELETE on the remote control
to format the USB device.
ROOT
FOLDER
FILE
Or
FOLDER1
Press DELETE on the remote control repeatedly
3
during selecting the MP3/WMA/FLAC file.
FOLDER3
FOLDER4
FILE 5
FILE 6
FILE 7
The display changes in the following order.
- DEL FILE : Deletes file
- DEL DIR : Deletes folder
- FORMAT : Formats USB
FILE 8
FILE 9
FILE 10
FOLDER7
FOLDER8
2. To delete file/folder or format, press d/M
FILE 3
FILE 4
on the remote control.
If you want to exit the current mode,
press Zon the remote control.
FOLDER2
FILE 11
FILE 12
FOLDER5
FOLDER6
Caution
y Do not extract the USB device during
operation. (play, delete, etc.)
>
FILE 13
FILE 14
y Regular back up is recommended to prevent
data loss.
FILE 1
FILE 2
y The delete function may not be supported
according to the USB device.
y If there is no file in a folder, the folder will not
appear.
y Folders will be presented as the following
order;
ROOT FOLDER1 FOLDER3 FOLDER7
FOLDER8 FOLDER5 FOLDER6
Turn off the sound temporarily
Press @on the remote control to mute your
sound.
y File will be played from $file No.1 to $file
You can mute your unit, for example, to answer the
telephone, the “MUTE” will appear in the display
window.
No.14 one by one.
y Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
To cancel it, press @again or change the volume
level.
y *ROOT : The first screen you can see when a
computer recognize the USB/CD is “ROOT”.
Operating 17
Sleep Timer Setting
Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
the unit will be turned off.
Auto power down
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 15 minutes.
To cancel the sleep function, press SLEEP repeatedly
until “SLEEP 10” appears, and then press SLEEP
once again.
The unit will also turn itself off after six hours if the
main unit has been connected to another device
using the analog inputs.
Note
,
y You can check the remaining time before the
How to disconnect the wireless
network connection or the wireless
device
Turn off the unit by pressing the power button for
more than 5 seconds.
unit is turned off.
y Press SLEEP. The remaining time appears in
the display window.
3
Dimmer
Press DIMMER once.
The display windows dims over few steps.
To cancel it, press DIMMER again.
DEMO
In the power on state, adjust the volume level of the
main unit to minimum and then press and hold F on
the unit for about 7 seconds.
To cancel the DEMO function, press and hold the F on
the unit for about 7 seconds.
18 Operating
AUTO POWER On
Auto function change
This unit automatically turns on by an input source :
This unit recognizes input signals such as Bluetooth
and LG TV and then changes suitable function
automatically.
LG TV or Bluetooth
If you try to connect your Bluetooth device, this
unit turns on and the unit will be connected your
Bluetooth device.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
Note
,
y Depending on the connected device, this
function may not operate.
y Depending on the connected device, the unit
turns on but Bluetooth function may not be
connected.
When LG TV is connected
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG TV.
You can hear the sound from your TV.
y If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
3
Note
,
y This function is not available during recording
y If you try to connect to the “Music Flow
Bluetooth” app, Bluetooth function of this
unit is turned on.
or deleting.
y This function only works with devices that
were previously connected.
y If you turn on the unit using LG TV or
Bluetooth function, proper function of this
unit is turned on.
y If you have already paired with this unit,
automatically this unit can turn on by an
input source when this unit is turned off.
y If you turn off the unit by pressing the power
button for more than 5 seconds, Auto Power
On function is disabled.
To activate it, turn on the unit.
y To use this function, the main unit must be
registered in paired devices list of Bluetooth
device.
Operating 19
Listening to music stored on the
BLUETOOTH devices
Using a BLUETOOTH®
wireless technology
Pairing your unit and BLUETOOTH
device
Before you start the pairing procedure, make
sure the Bluetooth feature is activated on your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed, it
does not need to be performed again.
About BLUETOOTH
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
has interference from other electronic devices or you
connect a Bluetooth device from a different room.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
1. Turn on the unit.
2. Operate the Bluetooth device and perform
the pairing operation. When searching for this
unit with the Bluetooth device, a list of the
devices found may appear in the Bluetooth
device display depending on the type of
Bluetooth device. Your unit appears as “LG
CM2460DAB(XX)”.
3
Available Devices : Mobile phone, MP3, Laptop, PDA.
y Version: 2.1 + EDR
y Codec: SBC
Note
,
y XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see
BLUETOOTH Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles. This
unit is compatible with following profile.
“LG CM2460DAB(08) on your Bluetooth
”
device.
A2DP (Advanced Audio Distribution Profile)
y Depending on the Bluetooth device type,
some devices may have a different pairing
process. Enter the PIN code (0000) as
needed.
y You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
y The multi phone pairing connection is only
supported on Android devices. (Multi phone
pairing connection may not be supported
depending on the connected device
specifications.)
y Removable/detachable Bluetooth device
(Ex : Dongle etc.) will not support multi
pairing.
20 Operating
Note
3. When this unit has successfully connected with
your Bluetooth device, “PAIRED” will be appear
on the display window. After a short amount
of time, the Bluetooth device name will be
displayed.
,
y When this unit connected with multiple
Bluetooth devices, only one device which
you are playing keeps Bluetooth connection
when you change the function to the others.
y The sound may be interrupted when the
connection has interference from other
electronic devices.
Note
,
y “PAIRED” will momentarily appear on the
display when you connect other devices for
multi pairing
y You cannot control the Bluetooth device
with this unit.
y If the device name is unavailable, “_” will be
y Depending on the type of the device, you may
displayed.
not be able to use the Bluetooth function.
y You can enjoy wireless system using phone,
4. Listen to music.
MP3, Notebook, etc.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
y The more distance between the unit and
the Bluetooth device, the lower the sound
quality becomes.
3
Note
,
y When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
y Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
However, it may not work well in certain
situations as described below:
y When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
- There is a obstacle between the unit and
the Bluetooth device.
y When a Bluetooth device is not connected,
“BT READY” appears on the display window.
- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
y When you use Bluetooth function,
adjust the volume to a proper level on the
Bluetooth device.
y You should connect your Bluetooth device to
this unit again when you restart it.
y If it is not in Bluetooth function, only one
device can be connected.
y Even if this unit connected up to 3 Bluetooth
devices in the Bluetooth mode, you can play
and control music by using only one of the
connected devices.
y If a Bluetooth device is connected when
using LG TV, LG TV is disconnected and the
Bluetooth device is connected.
y When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
Operating 21
Install “Music Flow Bluetooth” App
through “Google Android Market
(Google Play Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
Using the Music Flow
Bluetooth App
Note
,
Only Android OS is available to use “Music Flow
Bluetooth” app with this unit.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
3. In the search result list, find and tap
“Music Flow Bluetooth” to start downloading
Bluetooth app.
About “Music Flow Bluetooth” App
4. Tap an icon for installation.
5. Tap an icon for downloading.
“Music Flow Bluetooth” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “Music Flow Bluetooth”
app.
Note
,
3
y Make sure that your Bluetooth device is
connected to the Internet.
y Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
Install “Music Flow Bluetooth”
App onto Your Bluetooth Device
There are two ways to install “Music Flow Bluetooth”
app onto your Bluetooth device.
Install “Music Flow Bluetooth” App
through QR code
1. Install “Music Flow Bluetooth” app through QR
code. Use the scanning software to scan the QR
code.
(Android OS)
2. Tap an icon for installation.
3. Tap an icon for downloading.
Note
,
y Make sure that your Bluetooth device is
connected to the internet.
y Make sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)”.
y Depending on area, QR code may not work.
22 Operating
Activate Bluetooth with
“Music Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Bluetooth device to this unit.
1. Tap “Music Flow Bluetooth” app icon on the home
screen to open “Music Flow Bluetooth” app, and
go to the main menu.
2. Tap [Menu] and select the unit you want.
3. If you want to get more information to operate,
tap [Help] on the [Setting] menu.
Note
,
y “Music Flow Bluetooth” app will be available
in the software version as follow;
3
- Android O/S : Ver 4.0.3 (or later)
y If you use “Music Flow Bluetooth” app for
operation, there would be some differences
between “Music Flow Bluetooth” app and
the supplied remote control. Use the supplied
remote control as necessary.
y Depending on the Bluetooth device, “Music
Flow Bluetooth” app may not work.
y After connection of “Music Flow Bluetooth”
app, music may be output from your device. In
this case, try connecting procedure again.
y If you operate the other applications or
change the settings on your Bluetooth
device while using “Music Flow Bluetooth”
app, “Music Flow Bluetooth” app may operate
abnormally.
y When “Music Flow Bluetooth” app operates
abnormally, check your Bluetooth device and
the connection of “Music Flow Bluetooth” app
and then try to connect again.
y Depending on the Smartphone's operating
system, you have some differences for “Music
Flow Bluetooth” operation.
y Check Bluetooth setting on your Bluetooth
device if “Music Flow Bluetooth” app
connection does not work well.
Operating 23
Presetting the Radio Stations
You can preset 50 stations for FM/DAB+.
Radio Operations
Before tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or F on
the unit until FM/DAB+ appears in the display
window.
Listening to the radio
1. Press FUNCTION on the remote control or F on
the unit until FM/DAB+ appears in the display
window.
2. [FM]
The last received station is tuned in.
Select the desired frequency by pressing
TUN. -/+ on the remote control or Y/U
on the unit.
2. [FM]
Auto tuning :
[DAB+]
Press and hold TUN. -/+ on the remote control
or Y/Uon the unit for about two seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit tunes
in a station.
Select the desired station by pressing
TUN. -/+ on the remote control or Y/U
on the unit.
3
3. Press PROGRAM/MEMORY on the remote
control. A preset number will blink in the display
window.
Or
Manual tuning :
Press TUN. -/+ on the remote control or
Y/Uon the unit repeatedly.
4. Press PRESET/FOLDER W/Son the remote
control to select the preset number you want.
[DAB+]
5. Press PROGRAM/MEMORY on the remote
control. The station is stored.
Manual tuning :
Press TUN. -/+ on the remote control or
Y/Uon the unit repeatedly when the
scaning is done.
6. Repeat steps 2 to 5 to store other stations.
7. To listen to a preset station, press
PRESET/FOLDER W/Son the remote control.
3. Adjust the volume by rotating volume knob on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Deleting all the saved stations
1. Press DELETE on the remote control.
Note
,
“DEL ALL” will flash up on the unit display.
When you change the function to DAB+ and no
signal is being received, this unit scans station
automatically.
2. Press DELETE on the remote control to erase all
the saved radio stations.
“DELETED ALL” will scroll on the display window.
Improving poor FM reception
Press d/Mon the remote control or Ton the
unit.
This will change the tuner from stereo to mono and
usually improve the reception.
24 Operating
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press RDS/SET on
the remote control repeatedly to cycle through the
various data types:
Listening to the DAB+
You can change the display information of the
currently broadcasting DAB+ channel.
Press DAB+ MODE on the remote control
repeatedly, the display changes in the following order;
SERVICE PTY NAME FREQ DLS
ENSEMBLE
PS
(Programme Service Name)
The name of the channel will appear in
the display.
The initials of the service name are displayed.
Displays the Name of the
channel for the current
broadcast.
SERVICE
PTY
RT
(Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
Displays the Type of the channel
for the current broadcast.
PTY NAME
FREQ
(Radio Text)
3
A text message contains special
information from the broadcast station.
This text may scroll across the display.
Displays the frequency of
the channel for the current
broadcast.
CT
(Time controlled by the channel)
This shows the time as broadcast by the
station.
It displays the current Scroll of
the channel which is selected.
DLS
Displays the Ensemble of
the channel for the current
broadcast.
ENSEMBLE
You can search the radio stations by programme type
by pressing RDS/SET on the remote control. The
display will show the last PTY in use. Press PTY one
or more times to select your preferred programme
type. Press and hold TUN. -/+. The tuner will search
automatically. When a station is found, the search
will stop.
DAB+ scan
Press and hold TUN. -/+ on the remote control or
C/V on the unit, all of DAB+ service list and
saved preset DAB+ stations will be deleted and scan
DAB+ service. Then press it again, scanning will be
cancelled.
Note
,
When moving the unit to other areas :
Delete all of the saved DAB+ scanned stations.
Operating 25
Sound adjustment
Advanced Operations
This system has a number of pre-set surround sound
fields. The displayed items for the equalizer may be
different depending on sound sources and effects.
Recording to USB
You can record a various sound source to USB.
You can select a desired sound mode by using
SOUND EFFECT on the remote control.
(CD, FM, PORTABLE)
1. Connect the USB device to the unit.
2. Select a function by pressing FUNCTION on the
On Display
Description
remote control or F on the unit.
This program lends
an enthusiastic
One track/file recording - You can record to USB
after playing a track/file you want.
POP
CLASSIC
ROCK
atmosphere to the
sound, giving you the
feeling you are at an
actual rock, pop, jazz
or classic concert.
All tracks/files recording - You can record to USB
after full stop status.
JAZZ
3
Programmed list recording - After showing the
programmed list, you can record it to USB.
(Refer to page 15)
Reinforces the treble,
bass and surround
sound effect.
BASS
3. Start the recording by pressing USB REC on the
remote control.
You can enjoy
optimized sound.
STANDARD
4. To stop recording, press Zon the remote control.
Pausing recording
Note
,
y On some speakers, sound may not be heard
or heard in low sound depending on the
sound mode.
During recording, press d/Mon the remote control
or Ton the unit to pause recording.
Press it again to restart recording.
(Only FM, PORTABLE)
y Maybe you need to reset the sound mode,
after switching the input, sometimes even
after the sound track changed.
26 Operating
Note
,
To select recording bit rate and
speed
y You can check the recording percentage rate
for the USB record on the display window
during the recording.
1. Press USB REC on the remote control for longer
than 3 seconds.
(MP3/WMA/FLAC CD Only)
2. Use C/Von the remote control or
y
y
During recording MP3/WMA/FLAC, there is no
sound.
Y/Uon the unit to select the bit rate.
3. Press USB REC on the remote control again to
When you stop recording during playback, the
file that has been recorded at that time will be
stored. (Except MP3/WMA/FLAC files)
select the recording speed.
4. Press C/Von the remote control or
Y/Uon the unit to select a desired
recording speed :
y Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete file may be made and not deleted
on PC.
(AUDIO CD only)
X1 SPEED
y If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL” or
“NOT SUPPORT” is displayed on the display
window.
- You can listen to music while recording it.
3
X2 SPEED
- You can just record the music file.
5. Press USB REC on the remote control to finish
y Multi card reader device or external HDD
cannot be used for USB recording.
the setting.
y A file is recorded by about 512 Mbyte when
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
you record for a long term.
y You may not store more than 2000 files.
y In case of the unsupported MP3/WMA/FLAC
file, the file recording may be stopped.
y It’ ll be stored as follows.
AUDIO CD
PORTABLE
MP3/WMA/FLAC
Tuner
Be responsible
Respect copyrights
Tuner : The current recording frequency is
shown.
Operating 27
Using your player as an alarm
clock
1. Turn the unit on.
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK.
2. Press and hold ALARM.
3. Select time mode by pressing C/Von the
3. Press C/Von the remote control or
Y/Uon the unit to change the hours and
minutes and press RDS/SET to save.
remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press C/Von the remote control or
Y/Uon the unit to select function and
press RDS/SET to save.
4. Press RDS/SET to confirm your selection.
5. Select the hours by pressing C/Von the
-
Press C/Vto select a memory No. when
you select tuner and then, press RDS/SET. If
there is no memory No., this step is skipped.
remote control.
6. Press RDS/SET.
7. Select the minutes by pressing C/Von
5. Press C/Von the remote control or
Y/Uon the unit to change the volume
and press RDS/SET to save. The clock icon “(“
shows that the alarm is set.
3
the remote control.
8. Press RDS/SET.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
device. (Refer to page 21)
Note
,
y If you set the clock, you can check the time
by pressing CLOCK even when the player is
turned off.
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “Music Flow Bluetooth” app.
y You can set alarm after you set the clock.
y If you set the clock and alarm, you can check
the alarm icon “(“ by pressing CLOCK even
when the player is turned off.
y If you set the clock and alarm, you can check
the alarm icon “(“ and setting information
by pressing ALARM even when the unit is
turned off.
y You can select ALARM on/off mode by
pressing ALARM.
28 Operating
1. Turn on the unit by pressing 1(Power) on the
LG Sound Sync
remote control.
2. Press FUNCTION on the remote control or F on
the unit until LG TV function is selected.
3. Set up the sound output of TV to listen to the
sound through this unit :
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV”
on the display window if connecting normally
between this unit and your TV.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
Note
,
y You can also use the remote control of this
unit while using LG Sound Sync. If you use TV's
remote control again, the unit synchronizes
with the TV.
3
y If the connection fails, check the conditions of
this unit and your TV : power, function
y Make sure of the condition of this unit and the
connection in the cases below when using LG
Sound Sync.
- Turned off the unit.
- Changing the function to the others.
- Disconnecting the wireless connection
caused by interference or a distance.
y The amount of time to turn off this unit is
different depending on your TV.
y If you connect LG Sound Sync when “Music
Flow Bluetooth“ app is connected, control
through the app is available.
y If you turned off the unit directly by pressing
1/!(Power), LG Sound Sync will be
disconnected. To use this function again, you
should reconnect the TV and the unit.
y If an LG TV is connected when using
Bluetooth, Bluetooth is disconnected and
the LG TV is connected.
y If you try to change the function on using
the LG TV function, volume will be change
according to the LG TV volume level.
Troubleshooting 29
Troubleshooting
Problem
Cause & Correction
y Turn off the power of this unit and the connected external device
(TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again.
The unit does not work
properly.
y Disconnect the power cord of this unit and the connected external device
(TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
y Previous setting may not be saved when device power is shut off.
y The power cord is not plugged in.
Plug in the power cord.
No Power.
No sound.
y Check whether electricity failed.
Check the condition by operating other electronic devices.
y Check whether you select right function.
Press FUNCTION and check the selected function.
y Check to see if the speakers are connected to the unit correctly.
4
y An unplayable disc is inserted. Insert a playable disc.
y No disc is inserted. Insert a disc.
The unit does not start
playback.
y The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
y The antenna is positioned poorly. Reorient the antenna position to good
reception.
y The signal strength of the radio station is too weak.
Tune to the station manually.
Radio stations cannot be
tuned in properly.
y No stations have been preset or preset stations have been cleared.
(when being tuned by scanning preset channels)
Preset some radio stations, see page 23 for details.
y The remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
y There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
The remote control does
not work properly.
y The batteries in the remote control are exhausted.
Replace the batteries with new ones.
y Check whether your LG TV supports LG Sound Sync.
y Check connection of LG Sound Sync.
LG Sound Sync does not
work.
y Check sound setting of your TV and this unit.
30 Appendix
Main unit
General
Power requirements
Refer to the main label.
Refer to the main label.
Power consumption
Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions (W x H x D)
Operating temperature
Operating humidity
Approx. 230 mm x 126 mm x 253 mm
5 °C to 35 °C
5 % to 90 %
Inputs
Portable in (PORT. IN)
DAB+ Tuning Range
0.4 Vrms (3.5 mm stereo jack) x 1
174.92 to 239.20 MHz
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier (RMS Output power)
5
Total
100 W
Front
50 W (6 Ω at 1 kHz, 10 % THD)
System
Frequency response
Signal-to-noise ratio
Dynamic range
80 to 20,000 Hz
80 dB
75 dB
Bus Power Supply (USB)
5 V 0500 mA
Appendix 31
Speakers
Front
Type
2 Way 2 Speaker
Impedance
6 Ω
Rated Input Power
Max. Input Power
Dimensions (W x H x D)
50 W
100 W
Approx. 150 mm x 252 mm x 140 mm
y Design and specifications are subject to change without notice.
5
32 Appendix
Notes on Discs
Maintenance
Handling Discs
Never stick paper or tape on the disc.
Handling the Unit
Storing Discs
When shipping the unit
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Cleaning Discs
Keeping the exterior surfaces clean
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for old vinyl records.
Do not use volatile liquids such as insecticide spray
near the unit.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
5
Maintaining the Unit
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn,
the picture quality could be diminished. For details,
please contact your nearest authorized service
center.
Appendix 33
Trademarks and
Licenses
Bluetooth wireless technology is a system which
allows radio contact between electronic.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
The Bluetooth word mark and logos are owned
by the Bluetooth SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
5
|