LG 55NANO81 User Manual

OWNER’S MANUAL  
Safety and Reference  
LED TV*  
* LG LED TV applies LCD screen with LED backlights.  
Please read this manual carefully before operating your set and  
retain it for future reference.  
*MFL71520714*  
Copyright © 2020 LG Electronics Inc. All Rights Reserved.  
(2007-REV01)  
Grounding (Except for devices which are not grounded.)  
- TV with a three-prong grounded AC plug must be connected to  
a three-prong grounded AC outlet. Ensure that you connect the  
earth ground wire to prevent possible electric shock.  
Handle the adapter carefully to avoid dropping or striking it. An  
impact could damage the adapter.  
To reduce the risk of fire or electrical shock, do not touch the TV  
with wet hands. If the power cord prongs are wet or covered with  
dust, dry the power plug completely or wipe dust off.  
Never touch this apparatus or antenna during a lightning storm.  
You may be electrocuted.  
Batteries  
Make sure the power cord is connected securely to the TV and wall  
socket if not secured damage to the Plug and socket may occur and  
in extreme cases a fire may break out.  
Do not insert metallic or inflammable objects into the product. If a  
foreign object is dropped into the product, unplug the power cord  
and contact the customer service.  
- Store the accessories (battery, etc.) in a safe location out of the  
reach of children.  
- Do not short circuit, disassemble, or allow the batteries to  
overheat. Do not dispose of batteries in a fire. Batteries should  
not be exposed to excessive heat.  
- Caution : Risk of fire or explosion if the battery is replaced by an  
incorrect type.  
Moving  
Do not touch the end of the power cord while it is plugged in. You  
may be electrocuted.  
- When moving, make sure the product is turned off, unplugged,  
and all cables have been removed. It may take 2 or more people  
to carry larger TVs. Do not press or put stress on the front panel  
of the TV. Otherwise, this may result in product damage, fire  
hazard or injury.  
If any of the following occur, unplug the product  
immediately and contact your local customer service.  
- The product has been damaged.  
- If water or another substance enters the product (like an AC  
adapter, power cord, or TV).  
Keep the packing anti-moisture material or vinyl packing out of the  
reach of children.  
- If you smell smoke or other odors coming from the TV  
- When lightning storms or when unused for long periods of time.  
Do not allow an impact shock, any objects to fall into the product,  
and do not drop anything onto the screen.  
Even the TV is turned off by remote control or button, AC power  
source is connected to the unit if not unplugged in.  
Do not press strongly upon the panel with a hand or a sharp  
object such as a nail, pencil, or pen, or make a scratch on it. It may  
cause damage to screen.  
Do not use high voltage electrical equipment near the TV (e.g., a  
bug zapper). This may result in product malfunction.  
Do not attempt to modify this product in any way without written  
authorization from LG Electronics. Accidental fire or electric shock  
can occur. Contact your local customer service for service or repair.  
Unauthorized modification could void the user’s authority to  
operate this product.  
Use only an authorized attachments / accessories approved by  
LG Electronics. Otherwise, this may result in fire, electric shock,  
malfunction, or product damage.  
Cleaning  
- When cleaning, unplug the power cord and wipe gently with a  
soft/dry cloth. Do not spray water or other liquids directly on the  
TV. Do not clean your TV with chemicals including glass cleaner,  
any type of air freshener, insecticide, lubricants, wax (car,  
industrial), abrasive, thinner, benzene, alcohol etc., which can  
damage the product and/or its panel. Otherwise, this may result  
in electric shock or product damage.  
Never disassemble the AC adapter or power cord. This may result in  
fire or electric shock.  
3
Preparing  
Separate Purchase  
Separate purchase items can be changed or modified for quality  
improvement without any notification. Contact your dealer to buy these  
items. These devices only work with certain models.  
The model name or design may be changed depending on the upgrade  
of product functions, manufacturer’s circumstances or policies.  
If the TV is turned on for the first time after it was shipped from the  
factory, initialization of the TV may take a few minutes.  
Image shown may differ from your TV.  
Your TV’s OSD (On Screen Display) may differ slightly from that  
shown in this manual.  
The available menus and options may differ from the input source  
or product model that you are using.  
New features may be added to this TV in the future.  
The device must be easily accessed to a location outlet near the  
access. Some devices are not made by turning on / off button,  
turning off the device and unplugging the power cord.  
Magic Remote Control  
MR20GA  
Check whether your TV model supports Bluetooth in the Wireless  
Module Specification to verify whether it can be used with the Magic  
Remote.  
The items supplied with your product may vary depending on the  
model.  
Product specifications or contents of this manual may be changed  
without prior notice due to upgrade of product functions.  
Wall Mounting Bracket  
For an optimal connection, HDMI cables and USB devices should  
have bezels less than 10 mm thick and 18 mm width. Use an  
(Depending on model)  
Make sure to use screws and wall mount bracket that meet the VESA  
standard. Standard dimensions for the wall mount kits are described in  
the following table.  
extension cable that supports  
if the USB cable or USB  
memory stick does not fit into your TV’s USB port.  
B
<
* A 10 mm  
B
=
A
B
A
A
* B 18 mm  
=
Use a certified cable with the HDMI logo attached.  
If you do not use a certified HDMI cable, the screen may not display  
or a connection error may occur.  
55NANO79*  
Recommended HDMI Cable Types  
- Ultra High Speed HDMI®/™ cable (3 m or less)  
50NANO79*  
49NANO80*  
49NANO81*  
49NANO86*  
55NANO80*  
55NANO81*  
55NANO86*  
55NANO90*  
55NANO91*  
300 x 300  
M6  
Model  
VESA (A x B) (mm)  
Standard screw  
Number of screws  
200 x 200  
M6  
4
4
LSW240B  
MSW240  
65NANO79*  
65NANO80*  
65NANO81*  
65NANO86*  
65NANO90*  
65NANO91*  
300 x 300  
M6  
OLW480B  
MSW240  
Wall mount bracket  
75NANO85*  
75/86NANO90*  
75/86NANO91*  
Model  
VESA (A x B) (mm)  
Standard screw  
600 x 400  
M8  
Number of screws  
Wall mount bracket  
4
4
OLW480B  
LSW640B  
4
Avoid touching the screen at all times, as this may result in  
damage to the screen.  
Lifting and moving the TV  
When attaching the stand to the TV set, place the screen  
facing down on a cushioned table or flat surface to protect  
the screen from scratches.  
Please note the following advice to prevent the TV from being scratched  
or damaged and for safe transportation regardless of its type and size.  
It is recommended to move the TV in the box or packing material  
that the TV originally came in.  
Before moving or lifting the TV, disconnect the power cord and all  
cables.  
Mounting on the Table  
When holding the TV, the screen should face away from you to  
avoid damage.  
1
Lift and tilt the TV into its upright position on a table.  
Leave a 10 cm (minimum) space from the wall for proper  
ventilation.  
10 cm  
Hold the top and bottom of the TV frame firmly. Make sure not to  
hold the transparent part, speaker, or speaker grill area.  
(Depending on model)  
2
Connect the power cord to a wall outlet.  
When transporting a large TV, there should be at least 2 people.  
When transporting the TV by hand, hold the TV as shown in the  
following illustration.  
When transporting the TV, do not expose the TV to jolts or excessive  
vibration.  
When transporting the TV, keep the TV upright, never turn the TV  
on its side or tilt towards the left or right.  
Do not apply excessive pressure to cause flexing / bending of frame  
chassis as it may damage screen.  
When handling the TV, be careful not to damage the protruding  
buttons.  
5
Securing TV to the Wall  
Do not apply foreign substances (oils, lubricants, etc.) to  
the screw parts when assembling the product. (Doing so  
may damage the product.)  
If you install the TV on a stand, you need to take actions  
to prevent the product from overturning. Otherwise, the  
product may fall over, which may cause injury.  
Do not use any unapproved items to ensure the safety and  
product life span.  
Any damage or injuries caused by using unapproved items  
are not covered by the manufacturer’s warranty.  
(Depending on model)  
Make sure that the screws are inserted correctly and  
fastened securely. (If they are not fastened securely  
enough, the TV may tilt forward after being installed.)  
Do not use too much force and over tighten the screws;  
otherwise screw may be damaged and not tighten  
correctly.  
1
Insert and tighten the eye-bolts, or TV brackets and bolts on the  
back of the TV.  
If there are bolts inserted at the eye-bolts position, remove the  
bolts first.  
2
3
Mount the wall brackets with the bolts to the wall. Match the  
location of the wall bracket and the eye-bolts on the rear of the TV.  
Connect the eye-bolts and wall brackets tightly with a sturdy rope.  
Make sure to keep the rope horizontal with the flat surface.  
If a television is not positioned in a sufficiently stable  
location, it can be potentially hazardous due to falling.  
Many injuries, particularly to children, can be avoided by  
taking simple precautions such as:  
- Using cabinets or stands recommended by the  
manufacturer of the television.  
- Only using furniture that can safely support the  
television.  
- Ensuring the television is not overhanging the edge of  
the supporting furniture.  
Use a platform or cabinet that is strong and large enough to  
support the TV securely.  
Brackets, bolts and ropes are not provided. You can obtain  
additional accessories from your local dealer.  
- Not placing the television on tall furniture (for  
example, cupboards or bookcases) without anchoring  
both the furniture and the television to a suitable  
support.  
- Not standing the televisions on cloth or other  
materials placed between the television and  
supporting furniture.  
- Educating children about the dangers of climbing on  
furniture to reach the television or its controls.  
6
Mounting to the Wall  
Attach an optional wall mount bracket at the rear of the TV carefully  
and install the wall mount bracket on a solid wall perpendicular to  
the floor. When you attach the TV to other building materials, please  
contact qualified personnel. LG recommends that wall mounting be  
performed by a qualified professional installer. We recommend the use  
of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with  
cables connected. When you do not use LG’s wall mount bracket, please  
use a wall mount bracket where the device is adequately secured to the  
wall with enough space to allow connectivity to external devices. It is  
advised to connect all the cables before installing fixed wall mounts.  
(Depending on model)  
Do not use a sharp object when you detached the cable  
cover. This could damage the cable or the cabinet. It may  
also cause personal harm. (Depending on model)  
10 cm  
When installing the wall mounting bracket, it is recommended to  
cover the stand hole using tape, in order to prevent the influx of  
dust and insects. (Depending on model)  
(Depending on model)  
Remove the stand before installing the TV on a wall mount  
by performing the stand attachment in reverse.  
For more information of screws and wall mount bracket,  
refer to the Separate Purchase.  
Stand hole  
If you intend to mount the product to a wall, attach VESA  
standard mounting interface (optional parts) to the back  
of the product. When you install the set to use the wall  
mounting bracket (optional parts), fix it carefully so as  
not to drop.  
When mounting a TV on the wall, make sure not to install  
the TV by hanging the power and signal cables on the back  
of the TV.  
Do not install this product on a wall if it could be exposed  
to oil or oil mist. This may damage the product and cause  
it to fall.  
7
Other connections  
Connect your TV to external devices. For the best picture and audio  
quality, connect the external device and the TV with the HDMI cable.  
Some separate cable is not provided.  
Connections  
Connect various external devices to the TV and switch input modes to  
select an external device. For more information of external device’s  
connection, refer to the manual provided with each device.  
HDMI  
Antenna/Cable  
Connect the TV to a wall antenna socket with an RF cable (75 Ω).  
When connecting the HDMI cable, the product and external devices  
should be turned off and unplugged.  
Supported HDMI Audio format (Depending on model):  
True HD (48 kHz),  
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),  
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)  
Use a signal splitter to use more than 2 TVs.  
If the image quality is poor, install a signal amplifier properly to  
improve the image quality.  
If the image quality is poor with an antenna connected, try to  
realign the antenna in the correct direction.  
[Picture] [Additional Settings] [HDMI Ultra  
An antenna cable and converter are not supplied.  
For a location that is not supported with ULTRA HD broadcasting,  
HD Deep Colour]  
(Only NANO79*, NANO80*, NANO81*)  
- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)  
- Off : Support 4K @ 50/60 Hz (4:2:0)  
this TV cannot receive ULTRA HD broadcasts directly.  
Satellite dish  
(Except for NANO79*, NANO80*, NANO81*)  
- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0),  
<3,4 port Only> 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0)  
Connect the TV to a satellite dish to a satellite socket with a satellite RF  
cable (75 Ω). (Depending on model)  
- Off : Support 4K @ 50/60 Hz (4:2:0)  
If the device connected to Input Port also supports Ultra HD Deep  
Colour, your picture may be clearer. However, if the device doesn’t  
support it, it may not work properly. In that case, change the TV’s  
[HDMI Ultra HD Deep Colour] setting to off.  
CI module  
View the encrypted (pay) services in digital TV mode. (Depending on  
model)  
Check if the CI module is inserted into the PCMCIA card slot in the  
right direction. If the module is not inserted properly, this can  
cause damage to the TV and the PCMCIA card slot.  
If the TV does not display any video and audio when CI+ CAM is  
connected, please contact to the Terrestrial/Cable/Satellite Service  
Operator.  
USB  
Some USB Hubs may not work. If a USB device connected using a USB  
Hub is not detected, connect it to the USB port on the TV directly.  
8
External Devices  
Using Button  
Available external devices are: Blu-ray player, HD receivers, DVD players,  
VCRs, audio systems, USB storage devices, PC, gaming devices, and  
other external devices.  
You can simply operate the TV functions, using the button.  
The external device connection may differ from the model.  
Connect external devices to the TV regardless of the order of the  
TV port.  
If you record a TV program on a Blu-ray/DVD recorder or VCR, make  
sure to connect the TV signal input cable to the TV through a DVD  
recorder or VCR. For more information of recording, refer to the  
manual provided with the connected device.  
Refer to the external equipment’s manual for operating  
instructions.  
If you connect a gaming device to the TV, use the cable supplied  
with the gaming device.  
In PC mode, there may be noise associated with the resolution,  
vertical pattern, contrast or brightness. If noise is present, change  
the PC output to another resolution, change the refresh rate to  
another rate or adjust the brightness and contrast on the [Picture]  
menu until the picture is clear.  
In PC mode, some resolution settings may not work properly  
depending on the graphics card.  
If ULTRA HD content is played on your PC, video or audio may  
become disrupted intermittently depending on your PC’s  
performance. (Depending on model)  
Basic functions  
Power On (Press)  
Power Off1 (Press and Hold)  
Menu Control (Press2)  
Menu Selection (Press and Hold3)  
1
2
All running apps will close, and any recording in progress will stop.  
You can access and adjust the menu by pressing the button when  
TV is on.  
When connecting via a wired LAN, it is recommended to use a CAT  
7 cable. (Only when  
port is provided.)  
3
You can use the function when you access menu control.  
Adjusting the menu  
When the TV is turned on, press the button one time. You can adjust  
the Menu items using the button.  
Turns the power off.  
Changes the input source.  
Adjusts the volume level.  
Scrolls through the saved programmes.  
9
To use the button, press and hold for more than 1 second.  
Using Magic Remote  
Control  
(POWER) Turns the TV on or off.  
(STB POWER) You can turn your set-top box on or off by adding  
the settop box to the universal remote control for your TV.  
Number buttons Enters numbers.  
Accesses the [Quick Help].  
(DASH) Inserts a between numbers such as 2-1 and 2-2.  
Accesses the saved programmes list.  
(MORE ACTIONS) Displays more remote control functions.  
Edits QUICK ACCESS  
- QUICK ACCESS is a feature that allows you to enter a specified app  
or Live TV directly by pressing and holding the number buttons.  
Audio descriptions function will be enabled.  
Adjusts the volume level.  
(Depending on model)  
The descriptions in this manual are based on the buttons on the remote  
control. Please read this manual carefully and use the TV correctly.  
When the message [Magic Remote battery is low. Please change the  
battery.] is displayed, replace the battery.  
To replace batteries, open the battery cover, replace batteries (1.5 V AA)  
matching the and ends to the label inside the compartment,  
and close the battery cover. Be sure to point the magic remote toward  
the remote control sensor on the TV.  
(MUTE) Mutes all sounds.  
(MUTE) Accesses the [Accessibility] menu.  
Scrolls through the saved programmes.  
(Voice recognition) Network connection is required to use the  
voice recognition function.  
Check for recommended content. (Some recommended services may  
not be available in some countries.)  
(Voice recognition) Speak while pressing and holding the  
button to use the voice recognition feature.  
(HOME) Accesses the Home menu.  
(HOME) Shows the previous history.  
(Q. Settings) Accesses the Quick Settings.  
(Q. Settings) Displays the [All Settings] menu.  
Wheel (OK) Press the center of button to select a menu. You  
can change programmes by using button.  
(up/down/left/right) Press the up, down, left or right  
button to scroll the menu. If you press  
buttons while  
the pointer is in use, the pointer will disappear from the screen and  
Magic Remote will operate like a general remote control. To display  
the pointer on the screen again, shake Magic Remote to the left and  
right.  
(BACK) Returns to the previous level.  
(BACK) Clears on-screen displays and returns to last input  
viewing.  
Shows programme guide.  
Streaming Service buttons Connects to the Video Streaming  
1
1
1
1
1
Service.  
Shows the previous history.  
(INPUT) Changes the input source.  
(INPUT) Accesses the [Home Dashboard].  
Displays the set-top box Home menu.  
- When you are not watching via a set-top box: the display changes  
(Some buttons and services may not be provided depending on models  
or regions.)  
to the set-top box screen.  
,
,
,
These access special functions in some  
menus.  
Runs the record function.  
(Control buttons) Controls media contents.  
,
10  
Registering Magic Remote Control  
User Guide  
For more information about this TV, read the USER GUIDE embedded in  
the product. (Depending on model)  
How to register the Magic Remote Control  
To open the USER GUIDE  
Guide]  
[Support] [User  
To use the Magic Remote, first pair it with your TV.  
1
2
Put batteries into the Magic Remote and turn the TV on.  
Point the Magic Remote at your TV and press the Wheel (OK)  
on the remote control.  
* If the TV fails to register the Magic Remote, try again after turning the  
TV off and back on.  
Troubleshooting  
Cannot control the TV with the remote control.  
How to deregister the Magic Remote  
Control  
Press the (BACK) and (HOME) buttons at the same time, for  
Check the remote control sensor on the product and try again.  
Check if there is any obstacle between the product and the remote  
control.  
five seconds, to unpair the Magic Remote with your TV.  
Check if the batteries are still working and properly installed (  
* Press and hold the  
button for more than 5 seconds to disconnect  
to  
,
to ).  
and re-register the Magic Remote at the same time.  
No image display and no sound is produced.  
Check if the product is turned on.  
Do not mix new batteries with old batteries. This may  
Check if the power cord is connected to a wall outlet.  
cause the batteries to overheat and leak.  
Check if there is a problem in the wall outlet by connecting other  
products.  
The TV turns off suddenly.  
Failure to match the correct polarities of the battery may  
cause the battery to burst or leak, resulting in fire, personal  
injury, or ambient pollution.  
Check the power control settings. The power supply may be  
interrupted.  
Check if the auto-off function is activated on the settings related  
time.  
If there is no signal while the TV is on, the TV will turn off  
automatically after 15 minutes of inactivity.  
This apparatus uses batteries. In your community there  
might be regulations that require you to dispose of these  
batteries properly due to environmental considerations.  
Please contact your local authorities for disposal or  
recycling information.  
Batteries inside or inside the product shall not be exposed  
to excessive heat such as sunshine, fire or the like.  
When connecting to the PC (HDMI), no signal is detected.  
In Analogue TV and some countries, some remote control  
buttons may not work.  
Turn the TV off/on using the remote control.  
Reconnect the HDMI cable.  
Restart the PC with the TV on.  
11  
Abnormal Display  
Generated Sound  
If the product feels cold to the touch, there may be a small “flicker”  
when it is turned on. This is normal, there is nothing wrong with  
product.  
This panel is an advanced product that contains millions of pixels.  
You may see tiny black dots and/or brightly coloured dots (red, blue  
or green) at a size of 1 ppm on the panel. This does not indicate a  
malfunction and does not affect the performance and reliability of  
the product. This phenomenon also occurs in third-party products  
and is not subject to exchange or refund.  
“Cracking”noise: A cracking noise that occurs when watching or  
turning off the TV is generated by plastic thermal contraction due  
to temperature and humidity. This noise is common for products  
where thermal deformation is required.  
Electrical circuit humming/panel buzzing: A low level noise is  
generated from a high-speed switching circuit, which supplies a  
large amount of current to operate a product. It varies depending  
on the product. This generated sound does not affect the  
performance and reliability of the product.  
You may find different brightness and colour of the panel  
depending on your viewing position(left/right/top/down).  
This phenomenon occurs due to the characteristic of the panel.  
It is not related with the product performance, and it is not  
malfunction.  
Displaying a still image for a prolonged period of time may cause  
image sticking. Avoid displaying a fixed image on the TV screen for  
a long period of time.  
When cleaning the product, be careful not to allow any  
liquid or foreign objects to enter the gap between the  
upper, left or right side of the panel and the guide panel.  
(Depending on model)  
Make sure to wring any excess water or cleaner from the  
cloth.  
Do not spray water or cleaner directly onto the TV screen.  
Make sure to spray just enough of water or cleaner onto a  
dry cloth to wipe the screen.  
12  
Specifications  
(Depending on country)  
Broadcasting Specifications  
Digital TV  
Analogue TV  
PAL B/B, PAL B/G, PAL D/K, PAL-I  
SECAM B/G, SECAM D/K  
NTSC-M  
DVB-T/T21  
DVB-T/T2/C/S/S22  
Television system  
VHF, UHF  
C-Band2, Ku-Band2  
Programme coverage  
VHF, UHF, CATV  
DVB-T/T2 & Analogue TV : 3000  
Maximum number of storable  
programmes  
DVB-S/S2 : 6000  
External antenna impedance  
CI Module3 (W x H x D)  
75 Ω  
100.0 mm x 55.0 mm x 5.0 mm  
1
2
3
Only DVB-T2 support models. (Despite DVB-T2 model, DVB-T/T2 function does not apply in Philippines.)  
Only DVB-T2/C/S2 support models.  
Depending on model.  
(Only NANO79*, NANO80*, NANO81*)  
Wireless module(LGSBWAC02)Specifications  
Wireless LAN (IEEE 802.11a/b/g/n/ac)  
Frequency range  
Output Power (Max.)  
2400 to 2483.5 MHz  
5150 to 5725 MHz  
5725 to 5850 MHz  
17 dBm  
19 dBm  
10.5 dBm  
Bluetooth  
Frequency range  
Output power(Max.)  
8.5 dBm  
2400 to 2483.5 MHz  
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional  
frequency table.  
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.  
* IEEE 802.11ac is not available in all countries.  
(Only Oman)  
OMAN - TRA  
R/8042/19  
D172338  
13  
(Except for NANO79*, NANO80*, NANO81*)  
Frequency range  
Wireless module(LGSBWAC92)Specifications  
Wireless LAN (IEEE 802.11a/b/g/n/ac)  
Output Power (Max.)  
2400 to 2483.5 MHz  
5150 to 5725 MHz  
5725 to 5850 MHz  
18 dBm  
18 dBm  
12 dBm  
Bluetooth  
Frequency range  
Output power(Max.)  
8 dBm  
2400 to 2483.5 MHz  
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional  
frequency table.  
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.  
* IEEE 802.11ac is not available in all countries.  
(Only Oman)  
OMAN - TRA  
R/6106/18  
D172249  
Environment condition  
Operating Temperature  
Operating Humidity  
Storage Temperature  
Storage Humidity  
0 °C to 40 °C  
Less than 80 %  
-20 °C to 60 °C  
Less than 85 %  
The energy information provided with the product is indicated in accordance with the regulations of each country. (Depending on Country)  
- The Energy consumption is measured in accordance with IEC 62087.  
Actual Energy consumption may vary depending on factors such as the type of video content being played and TV settings.  
For information of the power supply and power consumption, refer to the label attached to the product. (Depending on Country)  
- The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.  
* On some models, the label is inside the external device connection terminal cover.  
* Depending on the model or country, the typical power consumption may not be on label.  
(Only Nigeria)  
Connection and use of this communications  
equipment is permitted by the Nigerian  
Communications Commission  
14  
Open Source Software  
Notice Information  
Regulatory  
WARNING!  
Never place a television set in an unstable location. A television set may  
fall, causing serious personal injury or death. Many injuries, particularly  
to children, can be avoided by taking simple precautions such as:  
To obtain the source code under GPL, LGPL, MPL, and other open  
source licenses, that is contained in this product, please visit http://  
In addition to the source code, all referred license terms, warranty  
disclaimers and copyright notices are available for download.  
LG Electronics will also provide open source code to you on CD-ROM  
for a charge covering the cost of performing such distribution (such  
as the cost of media, shipping, and handling) upon email request to  
This offer is valid for a period of three years after our last shipment of  
this product. This offer is valid to anyone in receipt of this information.  
Using cabinets or stands recommended by the manufacturer of the  
television set.  
Only using furniture that can safely support the television set.  
Ensuring the television set is not overhanging the edge of the  
supporting furniture.  
Not placing the television set on tall furniture (for example,  
cupboards or bookcases) without anchoring both the furniture and  
the television set to a suitable support.  
Not placing the television set on cloth or other materials that may  
be located between the television set and supporting furniture.  
Educating children about the dangers of climbing on furniture to  
reach the television set or its controls.  
Licenses  
If your existing television set is being retained and relocated, the same  
considerations as above should be applied.  
Symbols  
Refers to alternating current(AC).  
Refers to direct current(DC).  
Refers to class II equipment.  
Refers to stand-by.  
(Magic Remote supported models only)  
Refer to “ON”(power).  
Refers to dangerous voltage.  
15  
(Only Jordan)  
WEEE  
Disposal of your appliance  
The symbol indicating separate collection for electrical and electronic equipment consists of the crossed-out wheeled bin.  
0
16  
17  
For any Suggestion, Opinion,  
Complaints, Please Call  
800 54 in UAE  
0800 545454 in South Africa  
080 100 54 54 in Morocco  
19960 in Egypt  
021 36 54 54 in Algeria  
Other countries, Please contact our  
local dealer or log into  
The model and serial number of the product are located  
on the back and on one side of the product.  
Record them below in case you ever need service.  
Model  
Serial No.  

Whirlpool Acm102 User Manual
Toshiba Air Conditioner Rav Sp1404at8 E User Manual
Tekkeon Healthy White Hx6711 User Manual
Siemens Sqm5 User Manual
Sanyo N 700aac User Manual
Samsung Upc3240c User Manual
Samsung Eh070cav User Manual
Royal Sovereign Arp 6012x User Manual
MIELE G 5670 User Manual
MAKITA HR003G User Manual