OwnEr’s MAnUAL
LED LCD MOnITOr
(LED Monitor*)
* LG LED Monitor applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and
retain it for future reference.
32UP83A
Copyright © 2021 LG Electronics Inc. All rights reserved.
NoTE
opEN SourCE SofTwarE NoTICE
INformaTIoN
•
The components may look different from those illustrated here.
• without prior notice, all product information and specifications contained in this manual are subject to change
to improve the performance of the product.
To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
•
•
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product,
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available
for download.
The power cord provided may differ depending upon the region.
LG Electronics will also provide open source code to you on CD-rOM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected].
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in
receipt of this information.
Supported Drivers and Software
Drivers and software
Monitor Driver
Installation Priority
recommended
recommended
Optional
Onscreen Control
Dual Controller
True Color Pro
aSSEmbLING aND prEparING
Optional
CauTIoN
•
•
•
•
•
•
Always use genuine LG components to ensure safety and product performance.
The product warranty will not cover damage or injury caused by the use of unauthorized components.
It is recommended that use the supplied components.
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
Illustrations in this document represent typical procedures, so they may look different from the actual product.
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.)
•
•
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
and could result in personal injury.
• when lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
3
product and button Description
moving and Lifting the monitor
when moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•
•
•
Place the monitor in the original box or packing material before attempting to move it.
Before moving or lifting the monitor, disconnect the power cord and all other cables.
Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
• when holding the monitor, the screen should face away from you to prevent it from being scratched.
• when transporting the monitor, do not expose the monitor to shock or excessive vibration.
• when moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
Joystick button
How to use the Joystick button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/
down with your finger.
basic functions
CauTIoN
Press the joystick button once with your finger
to turn on the monitor.
power on
•
•
Avoid touching the monitor screen as much as possible.
- This may result in damage to the screen or some of the pixels used to create images.
If you use the monitor panel without the stand base, its joystick button may cause the monitor to become
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick
button to malfunction.
Press and hold the joystick button once more
than 3 seconds with your finger to turn off the
monitor.
power off
You can control the volume by moving the
joystick button left/right.
/
Volume control
NoTE
The joystick button is located at the bottom of the monitor.
•
4
Installing on aTable
adjusting the Stand Height
•
Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm (3.94
inches) away from the wall to ensure sufficient ventilation.
1
2
Place the monitor mounted on the stand base in an upright position.
Handle the monitor with both hands for safety.
100 mm
(3.94 inches)
max. 110.0 mm (4.3 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
warNING
• when adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.
adjusting the angle
1
2
Place the monitor mounted on the stand base in an upright position.
Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 20° for a comfortable viewing
experience.
warNING
•
•
To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
Be careful not to touch or press the screen area when adjusting the angle of the monitor.
CauTIoN
•
•
Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•
If you need another power cord, please contact your local dealer or the nearest retail store.
5
pivot feature
The pivot feature allows the monitor to rotate 90° clockwise.
3
rotate the monitor clockwise as shown in the figure.
Head
4
Complete the installation by rotating the monitor 90° as shown below.
Stand
warNING
•
To avoid scratching the stand base, make sure that when rotating the monitor using the pivot feature, the
stand does not make contact with the monitor.
1
raise the monitor to the maximum height.
NoTE
•
•
Auto Pivot feature of the display is not supported.
The screen can be rotated easily using the screen pivot shortcut key provided with your windows operating
system. note that some windows versions and some graphics card drivers may use different settings for the
screen pivot key or may not support the pivot key at all.
2
Adjust the angle of the monitor in the direction of the arrow as shown in the figure.
6
using the Kensington Lock
Installing the wall mount plate
The connector for the Kensington security system is located at the back of the monitor.
This monitor meets the specifications for the wall mount plate or other compatible devices.
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
NoTE
•
•
•
The wall mount plate is sold separately.
For more information on installation, refer to the wall mount plate’s installation guide.
Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
Connect the monitor to a table using the Kensington security system cable.
• remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.
Installing on the wall
Install the monitor at least 100 mm (3.94 inches) away from the wall and leave about 100 mm (3.94 inches)
of space at each side of the monitor to ensure sufficient ventilation. Detailed installation instructions can be
obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a
tilting wall mounting bracket.
100 mm
(3.94 inches)
NoTE
•
•
The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
NoTE
100 mm
(3.94 inches)
The left or right side of the monitor head can be slightly rotated up or down (up to 3°). Adjust the horizontal
level of the monitor head.
100 mm
(3.94 inches)
100 mm
monitor head
(3.94 inches)
7
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
CauTIoN
•
•
Unplug the power cord before moving or installing the monitor to avoid electric shock.
Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead
to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
Use the wall mounting bracket and screws that conform to VEsA standards. Damage caused by the use or
wall mount (mm)
100 x 100
M4 x L10
4
Standard screw
•
•
Number of screws
wall mount plate (optional)
Lsw 149
misuse of inappropriate components will not be covered by the product warranty.
• when measured from the back of the monitor, the length of each installed screw must be 8 mm (0.3 inches)
or less.
wall Mount Plate
Back of the Monitor
NoTE
•
A non-VEsA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable
for any accidents relating to the use of non-standard screws.
wall Mount Plate
•
•
•
The wall mount kit includes the installation guide and all necessary parts.
The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product.
For more information, please refer to the user manual for the wall mounting bracket.
Back of the Monitor
standard screw:
•
M4 x L10
Max. 8 mm (0.3 inches)
8
Displayport Connection
Transmits digital video and audio signals from your PC to the monitor.
uSING THE moNITor
•
Illustrations in this manual may differ from the actual product.
NoTE
Press the joystick button, go to Settings Input, and then select the input option.
•
•
There may be no video or audio output depending on the DP (DisplayPort) version of the PC.
If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort)
CauTIoN
cable or gender that supports DisplayPort1.2 or 1.4. (sold separately)
•
•
Do not press the screen for a prolonged time. This may cause image distortion.
Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC
screensaver if possible.
uSb-C connection
Transmits digital video and audio signals from your PC to the monitor.
• when connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet.
•
The monitor may flicker when turned on in an area where the temperature is low. This is normal.
NoTE
• sometimes red, green, or blue spots may appear on the screen. This is normal.
•
•
•
PD(Power Delivery) and DP Alternate Mode(DP over UsB-C) are supported via UsB-C Port.
Features may not work properly depending on the connected device’s specifications and the environment.
UsB-C port is not for the Monitor Power source but for a PC power source.
Connect Adapter to supply power to the Monitor
Connecting to a pC
•
This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.
HDmI Connection
Transmits digital video and audio signals from your PC to the monitor.
CauTIoN
•
•
Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
• recommended HDMI cable types
- High-speed HDMI®/TM cable
- High-speed HDMI®/TM cable with Ethernet
9
CauTIoN
Connecting aV Devices
•
Cautions when Using a UsB Device
- A UsB device with an automatic recognition program installed, or that uses its own driver, may not be
recognized.
- some UsB devices may not be supported or may not work properly.
HDmI Connection
HDMI transmits digital video and audio signals from your AV device to the monitor.
NoTE
- It is recommended to use a UsB hub or hard disk drive with power supplied. (If the power supply is not
adequate, the UsB device may not be recognized properly.)
•
•
Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
• recommended HDMI cable types
- High-speed HDMI®/TM cable
- High-speed HDMI®/TM cable with Ethernet
Headphones Connection
Connect peripherals to the monitor via the headphones port.
NoTE
•
•
Peripheral devices are sold separately.
Depending on the audio settings of the PC and external device, headphones and speaker functions may be
limited.
If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Therefore, it is recommended to use straight earphones.
Connecting peripherals
uSb Device connection
The UsB port on the product functions as a UsB hub.
NoTE
•
•
It is recommended you install all windows Updates to keep your windows up-to-date before connecting to the
product for use.
•
•
•
•
Peripheral devices are sold separately.
A keyboard, mouse, or UsB device can be connected to the UsB port.
The charging speed may vary depending on the device.
Angled
straight
(recommend)
To use UsB Downstream port of monitor, user must connect Upstream port of monitor to Host PC using UsB C-C
or UsB C-A cable.
• when the UsB C-C cable is connected between Upstream port of monitor and Host PC, the Downstream port of
monitor support UsB 2.0 device.
• when the UsB C-A cable is connected between Upstream port of monitor and Host PC, the Downstream port of
monitor support UsB 3.0 device.
However, Host PC must support UsB 3.0 function.
10
uSEr SETTINGS
NoTE
•
Your monitor’s OsD (On screen Display) may differ slightly from that shown in this manual.
activating the main menu
1
2
3
Press the joystick button on the bottom of the monitor.
Move the joystick up/down and left/right to set the options.
Press the joystick button once more to exit the main menu.
Joystick button
button
menu Status
Description
main menu disabled
Enables the main menu.
Exits the main menu.
main menu enabled
(Holding down the button more than 3 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OsD is on.)
main menu disabled
Adjusts the monitor volume level.
Enters the Input features.
main menu enabled
main menu disabled
main menu enabled
main menu disabled
main menu enabled
main menu disabled
main menu enabled
Adjusts the monitor volume level.
Enters the Settings feature.
Displays the information on the current input.
Turns off the monitor.
Displays the information on the current input.
Enters the picture mode feature.
11
main menu features
main menu
Description
Input
sets input mode.
power off
power off
Settings
picture mode
Exit
Turns off the monitor.
Configures the screen settings.
sets the picture mode.
Exits the main menu.
Exit
Input
Settings
picture mode
menu Settings
1
2
3
4
To view the OsD menu, press the joystick button at the bottom of the monitor and then enter the Settings.
Move the joystick up/down and left/right to set the options.
To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
If you want to exit the OsD menu, move the joystick to until you exit.
Quick Settings
Input
picture
Sound
General
12
Quick Settings
Settings > Quick Settings
brightness
Description
Adjusts the contrast and brightness of the screen.
Contrast
Adjusts the volume.
Volume
NoTE
•
You can adjust mute / unmute by moving the joystick button to in the Volume menu.
The user can adjust it to red, green, or blue by customization.
Custom
sets the screen color to a reddish tone.
warm
medium
Cool
ColorTemp
sets the screen color between a red and blue tone.
sets the screen color to a bluish tone.
manual
on
The user can fine-tune the color temperature.
MaxxAudio® by waves, recipient of a Technical GrAMMY Award® is a suite of studio-quality sound tools for a superior listening experience.
waves maxxaudio®
Disables the MaxxAudio function.
off
13
Input
Settings > Input
Description
Input List
selects the input mode.
Adjusts the aspect ratio of the screen.
full wide
Displays the video in widescreen, regardless of the video signal input.
Displays video according to the aspect ratio of the video signal input.
The aspect ratio is not adjusted from the original.
original
aspect ratio
Just Scan
NoTE
•
•
The display may look the same for Full wide , Original, and Just scan options at the recommended resolution (3840 x 2160).
There is no Just Scan menu on freeSync Mode. ( Go to picture → Game adjust → freeSync, to set from freeSync basic or Extended to off)
14
picture
NoTE
•
The picture mode that can be set depends on the Input signal.
[picture mode on SDr (Non-HDr) signal]
Settings > picture
Description
Allows the user to adjust each element.
Custom
Vivid
Heightens contrast, brightness and sharpness to display vivid images.
HDr Effect
reader
Cinema
fpS
Optimizes the screen for high dynamic range.
Optimizes the screen for viewing documents. You can brighten the screen in the OsD menu.
Optimizes the screen for video.
This mode is optimized for FPs games.
rTS
This mode is optimized for rTs Game.
Colorweakness
This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish
between the two colors.
picture mode
srGb
A standard rGB color space for the monitor and printer.
DCI-p3
suitable for watching digital videos.
Calibration 1
Calibration 2
Adjusts to the last calibrated screen.
Adjusts to the previously calibrated screen.
NoTE
•
•
If the picture mode is changed in the DP (DisplayPort) input, the screen may flicker or the resolution of your PC screen may be affected.
Calibration 2 : Installation of TrUE COLOr PrO and proceeding Calibration will enable this menu.
15
[picture mode on HDr signal]
Settings > picture
Description
Allows the user to adjust each element.
Custom
Vivid
Cinema
fpS
Optimized the screen for HDr vivid colors.
Optimized the screen for HDr video.
This mode is optimized for FPs games.It is suitable for very dark FPs games.
This mode is optimized for rTs Game.
picture mode
rTS
NoTE
•
HDr content may not display correctly depending on window10 Os settings, please check HDr On/Off settings in windows.
• when the HDr function is turned on, the characters or picture quality may be poor according to Graphic card performance.
• while the HDr function is on, screen flickering or cracking may occur when changing the monitor input or power on/off according to Graphic card performance.
16
Settings > picture
Description
Adjusts the contrast and brightness of the screen.
Adjusts the sharpness of the screen.
brightness
Contrast
Sharpness
High
Optimizes the screen for crystal clear images. Best for high-definition video or games.
Optimizes the screen for comfortable viewing, with images at the middle level between the low and high
modes. Best for UCC or sD videos.
middle
Low
Optimizes the screen for smooth and natural images. Best for still images or images with less movement.
SupEr rESoLuTIoN+
off
Displays in the most common setting. Disables SupEr rESoLuTIoN+.
picture adjust
NoTE
•
Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for
normal text or for desktop icons. Doing so may result in unnecessarily high sharpness.
sets the offset level (for HDMI only).
Offset: as a reference for a video signal, this is the darkest color the monitor can display.
•
black Level
High
Keeps the current contrast ratio of the screen.
Low
Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
Adjusts the brightness automatically according to the screen.
Disables the DfC feature.
on
DfC
off
17
Settings > picture
Description
sets a response time for displayed pictures based on the movement of the picture on the screen.
For a normal environment, it is recommended that you use fast. when there is a lot of motion, it is recommended that you use
faster.
setting to faster may cause image sticking.
response Time
faster
fast
sets the response time to faster.
sets the response time to fast.
Normal
off
sets the response time to normal.
Does not use the response time improvement feature.
Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.
CauTIoN
Game adjust
• supported Interface: DisplayPort, HDMI
• supported Graphic Card: A graphic card that supports AMD’s Freesync is necessary.
• supported Version: Make sure to update the graphic card to the latest driver.
freeSync
•
Extended
Enable wider frequency range of Freesync function than basic mode.
The screen may flicker during the game play.
Enable basic frequency range of Freesync function.
Freesync function off.
basic
off
You can control the black contrast to have better visibility in dark scenes.
Increasing the black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark
game screens.)
black Stabilizer
reducing the black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.
18
Settings > picture
Description
mode 1,
mode 2,
mode 3
The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter
the image becomes.
Gamma
mode 4
If you do not need to adjust the gamma settings, select mode 4.
set your own color temperature.
Custom
warm
The user can adjust it to red, green, or blue by customization.
sets the screen color to a reddish tone.
ColorTemp
medium
sets the screen color to between a red and blue tone.
Color adjust
Cool
sets the screen color to a bluish tone.
manual
The user can fine-tune the color temperature.
red/Green/blue
You can customize the picture color using red, green, and blue colors.
Meets the user requirements for colors by adjusting the hue and saturation of the six colors (red, green, blue, cyan, magenta, and
yellow) and then saving the settings.
Hue
Adjusts the tone of the screen colors.
Six Color
Saturation
Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors
become. The higher the value, the more saturated and darker the colors become.
Yes
returns to the default settings.
picture reset
Do you want to reset your picture settings?
No
Cancel the select.
19
Sound
Settings > Sound
Description
Adjusts the volume level.
Volume
NoTE
•
You can adjust mute / unmute by moving the joystick button to▼in the Volume menu.
on
MaxxAudio® by waves, recipient of a Technical GrAMMY Award® is a suite of studio-quality sound tools for a superior listening
experience.
waves maxxaudio
off
Disables the MaxxAudio function.
20
General
Settings > General
Description
Language
sets the menu screen to the desired language.
Conserve energy by using luminance compensation algorithm.
High
Low
off
saves energy using the high-efficiency SmarT ENErGY SaVING feature.
saves energy using the low-efficiency SmarT ENErGY SaVING feature.
Disables the feature.
SmarT ENErGY SaVING
NoTE
•
•
The value of energy saving data may differ depending on panel and panel suppliers.
If you select the option of SmarT ENErGY SaVING is High or Low, monitor luminance become lower or higher depend on source.
on
The power LED turns on automatically.
The power LED turns off.
off
NoTE
power LED
• when the Power LED function is turned on, it operates as follows:
- On Mode: white
- sleep Mode (standby Mode): white Blinking
- Off Mode: Off
Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function.
(off, 4 H, 6 H, and 8 H)
automatic Standby
set DisplayPort Version to the same version as the connected external device. (1.4, 1.2)
To use the HDr function, set to 1.4.
Displayport Version
21
Settings > General
Description
Provides sharper images when connected to a device supporting ULTrA HD Deep Color.
4K@ 60 Hz Support format
Color Depth / Chroma Sampling
resolution
frame rate(Hz)
8 bit
10 bit
YCbCr 4:2:0
YCbCr 4:2:2
59.94
60.00
3840 x 2160
HDmI uLTra HD Deep Color
YCbCr 4:4:4
-
-
rGB 4:4:4
NoTE
To use HDMI ULTrA HD Deep Color, turn this function "On".
If the connected device does not support Deep Color, the screen or sound may not work properly. In this case, set this function to off.
The HDMI ULTrA HD Deep Color function can be set individually for each HDMI port.
•
•
•
•
To use the HDr function, set HDMI ULTrA HD Deep Color to "On".
This feature lets you set the sound generated from Buzzer when your monitor powers on.
on
buzzer
Enables your monitor's buzzer.
off
Disables your monitor's buzzer.
This feature disables the configuration and adjustment of menus.
on
Enables oSD Lock.
off
Disables oSD Lock.
NoTE
•
The menus except the menus below are disabled.
oSD Lock
- brightness
- Contrast
- Volume
- Input List
- aspect ratio
- oSD Lock
22
- Information
Settings > General
oSD Size
Description
User can select OsD size to Large or small.
The following display information will be shown; Total power on Time, resolution.
Information
Do you want to reset your settings?
reset to Initial Settings
Yes
returns to the default settings.
No
Cancel the reset.
23
TroubLESHooTING
Nothing is displayed on the screen.
Is the monitor's power cord plugged in?
Is the power LED on?
•
•
•
•
•
Check if the power cord is correctly plugged into the power outlet.
Check the power cable connection and press the power button.
Is the power on and the power LED displaying white?
Is the No Signal message being displayed?
Is the out of range message being displayed?
Check that the connected input is enabled (Settings > Input).
This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. Please see the Product
specification section of this manual to set the appropriate frequency.
Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution?
•
If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended
resolution.
• not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or
misalignment of the display.
•
The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the
performance of the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.
Does image sticking occur even when the monitor is turned off?
Are there spots on the screen?
•
•
Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.
To extend the lifetime of the monitor, use a screensaver.
• when using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD screen. It is not an error, nor
is it related to the monitor's performance.
Some features are disabled.
Are some functions not available when you press the Menu button?
•
The OsD is locked. Disable oSD Lock in General.
24
Do you see an "unrecognized monitor, plug and play (VESa DDC) monitor found" message?
Have you installed the display driver?
•
•
Make sure to check if the graphics card supports Plug and Play function.
No sound from the headphone port.
Are images displayed without sound?
•
•
Make sure that the headphone port connections are made properly.
Try increasing the volume with the joystick.
• set the audio output of the PC to the monitor you are using. (The settings may differ depending on the operating system (Os) you use.)
NoTE
•
LED can be lighted with set OsD Menu.
settings – General – Power LED – On
25
PRODUCT SPECIFICATION
Color Depth
8-bit / 10-bit color is supported.
Max Resolution
3840 x 2160 @ 60 Hz
3840 x 2160 @ 60 Hz
Resolution
Recommended Resolution
Power Rating
19.5 V
8.0 A
On mode: 55 W Typ. (Outgoing condition) *
Sleep Mode (Standby Mode) ≤ 0.5 W (HDMI / DP input Condition) **
Off Mode ≤ 0.3 W
Power Sources
AC/DC adaptor
Power Consumption
ACC-LATP1 type, SHENZHEN HONOR ELECTRONIC
Output: 19.5 V
10.8 A
0 °C to 40 °C (32 °F to 104 °F)
Operating Conditions
Storing Conditions
Temperature
Humidity
Less than 80 %
Environmental Conditions
-20 °C to 60 °C (-4 °F to 140 °F)
Less than 85 %
Temperature
Humidity
Monitor Size (Width x Height x Depth)
With Stand
714.3 x 597.6 x 239.3 (mm)
28.1 x 23.5 x 9.4 (inches)
Dimensions
714.3 x 420.1 x 45.7 (mm)
28.1 x 16.5 x 1.7 (inches)
Without Stand
8.3 kg (18.2 lbs)
6.5 kg (14.3 lbs)
With Stand
Weight (Without Packaging)
Without Stand
The specifications are subject to change without notice.
The ~ symbol means alternating current, and the symbol
means direct current.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
** In case of USB-C input, the power consumption of Sleep Mode may vary depending on the connected device.
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
26
factory Support mode (preset mode, pC)
Displayport/ uSb-C
preset mode
Horizontal frequency (kHz)
Vertical frequency (Hz)
polarity (H/V)
remarks
640 x 480
800 x 600
31.469
37.879
48.363
67.5
59.94
60.317
60
-/-
+/+
-/-
1024 x 768
1920 x 1080
2560 x 1440
3840 x 2160
3840 x 2160
60
+/-
+/-
+/-
+/-
88.79
66.66
133.32
59.95
30
60
DP/UsB-C Preferred timing
27
HDmI
preset mode
Horizontal frequency (kHz)
Vertical frequency (Hz)
polarity (H/V)
remarks
640 x 480
800 x 600
31.469
37.879
48.363
67.5
59.94
60.317
60
-/-
+/+
-/-
1024 x 768
1920 x 1080
2560 x 1440
3840 x 2160
3840 x 2160
60
+/-
+/-
+/-
+/-
88.79
66.66
135
59.95
30
HDMI Preferred timing, HDmI uLTra HD Deep Color : off
60
HDMI Preferred timing, HDmI uLTra HD Deep Color : on
28
HDmI Timing (Video)
factory support mode
Horizontal
frequency(kHz)
Vertical frequency(Hz)
remarks
(preset mode)
480p
720p
31.5
45.0
67.5
135
60
60
60
60
1080p
2160p
when HDMI ULTrA HD Deep Color is set to On
29
Supplier’s Declaration of Conformity
Trade name
LG
responsible Party
Address
LG Electronics UsA, Inc.
111 sylvan Avenue, north Building,
Englewood Cliffs,nJ 07632
E-mail
The model and serial number of the product are located on the back and on one side of the product.
record them below in case you ever need service.
Model
serial no.
Free Manuals Download Website
Golf course search by state
Email search by domain
Auto manuals search
TV manuals search
|