LG 32UL500 User Manual

OwnErs ManUaL  
LED LCD MOnITOr  
(LED Monitor*)  
* LG LED Monitor applies LCD screen with LED backlights.  
Please read this manual carefully before operating your set and  
retain it for future reference.  
32UL500  
Copyright © 2018 LG Electronics Inc. all rights reserved.  
NoTE  
opEN SourCE SofTwarE NoTICE INforma-  
TIoN  
The components may look different from those illustrated here.  
without prior notice, all product information and specifications contained in this manual are subject to change  
to improve the performance of the product.  
To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer  
from which you purchased the product.  
The power cord provided may differ depending upon the region.  
To obtain the source code under GpL, LGpL, MpL, and other open source licenses, that is contained in this product,  
please visit http://opensource.lge.com.  
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available  
for download.  
LG Electronics will also provide open source code to you on CD-rOM for a charge covering the cost of performing  
such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected].  
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in  
Supported Drivers and Software  
You can download and install the latest version from the LGE website (www.lg.com).  
receipt of this information.  
Drivers and Software  
Monitor Driver  
Installation priority  
recommended  
recommended  
Optional  
OnScreen Control  
Dual Controller  
aSSEmbLING aND prEparING  
CauTIoN  
Always use genuine LG components to ensure safety and product performance.  
The product warranty will not cover damage or injury caused by the use of unauthorized components.  
It is recommended that use the supplied components.  
If you use generic cables not certified by LG, the screen may not display or there may be image noises.  
Illustrations in this document represent typical procedures, so they may look different from the actual product.  
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing  
so may damage the product.)  
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this  
way will not be covered by the product warranty.  
Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand  
and could result in personal injury.  
when lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen  
may cause damage to it.  
for wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material  
in raw material.with no peeled-off appearance, it has good durability. please use it with confidence because  
there is no problem in using the product at all.  
3
product and button Description  
moving and Lifting the monitor  
when moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or  
damaged and to ensure safe transportation, regardless of its shape or size.  
place the monitor in the original box or packing material before attempting to move it.  
Before moving or lifting the monitor, disconnect the power cord and all other cables.  
Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.  
when holding the monitor, the screen should face away from you to prevent it from being scratched.  
when transporting the monitor, do not expose the monitor to shock or excessive vibration.  
when moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.  
Joystick button / power LED  
How to use the Joystick button  
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/  
down with your finger.  
basic functions  
CauTIoN  
press the joystick button once with your finger  
to turn on the monitor.  
power on  
Avoid touching the monitor screen as much as possible.  
- This may result in damage to the screen or some of the pixels used to create images.  
If you use the monitor panel without the stand base, its joystick button may cause the monitor to become  
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick  
button to malfunction.  
press and hold the joystick button once more  
than 5 seconds with your finger to turn off the  
monitor.  
power off  
You can control the volume by moving the  
joystick button left/right.  
/
Volume control  
NoTE  
The joystick button is located at the bottom of the monitor.  
4
Installing on aTable  
adjusting the angle  
Lift the monitor and place it on the table in an upright position. place the monitor at least 100 mm away from  
the wall to ensure sufficient ventilation.  
1
2
place the monitor mounted on the stand base in an upright position.  
Adjust the angle of the screen.  
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing  
experience.  
warNING  
100 mm  
100 mm  
To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as  
illustrated below.  
Be careful not to touch or press the screen area when adjusting the angle of the monitor.  
100 mm  
100 mm  
CauTIoN  
unplug the power cord before moving or installing the monitor. There is risk of electric shock.  
Make sure to use the power cord that is provided in the product package and connect it to a grounded power  
outlet.  
If you need another power cord, please contact your local dealer or the nearest retail store.  
5
using the Kensington Lock  
Installing the wall mount plate  
The connector for the Kensington security system is located at the bottom of the monitor.  
This monitor meets the specifications for the wall mount plate or other compatible devices.  
for more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website  
Connect the monitor to a table using the Kensington security system cable.  
NoTE  
The wall mount plate is sold separately.  
for more information on installation, refer to the wall mount plate’s installation guide.  
Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the  
screen.  
remove the stand before installing the monitor on a wall mount by performing the stand attachment in  
reverse.  
Installing on the wall  
Install the monitor at least 100 mm away from the wall and leave about 100 mm of space at each side of the  
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail  
store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.  
100 mm  
NoTE  
The Kensington security system is optional. You can obtain optional accessories from most electronics stores.  
100 mm  
100 mm  
100 mm  
6
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.  
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.  
CauTIoN  
unplug the power cord before moving or installing the monitor to avoid electric shock.  
Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead  
to injury. use an authorized LG wall mount and contact the local dealer or qualified personnel.  
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this  
way will not be covered by the product warranty.  
wall mount (mm)  
100 x 100  
M4 x L10  
4
Standard screw  
Number of screws  
wall mount plate (optional)  
LSw 149  
use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or  
misuse of inappropriate components will not be covered by the product warranty.  
when measured from the back of the monitor, the length of each installed screw must be 8 mm or less.  
wall Mount plate  
Back of the Monitor  
NoTE  
A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable  
for any accidents relating to the use of non-standard screws.  
The wall mount kit includes the installation guide and all necessary parts.  
wall Mount plate  
Back of the Monitor  
The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.  
The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard  
length, it may damage the inside of the product.  
for more information, please refer to the user manual for the wall mounting bracket.  
Standard screw:  
M4 x L10  
Max. 8 mm  
7
Displayport Connection  
Transmits digital video and audio signals from your pC to the monitor.  
uSING THE moNITor  
Illustrations in this manual may differ from the actual product.  
NoTE  
press the joystick button, go to Settings Input, and then select the input option.  
There may be no video or audio output depending on the Dp (Displayport) version of the pC.  
Make sure to use the supplied Displayport cable of the product. Otherwise, this may cause the device to  
CauTIoN  
malfunction.  
Do not press the screen for a prolonged time. This may cause image distortion.  
Do not display a still image on the screen for a prolonged time. This may cause image retention. use a pC  
If you are using a Mini Displayport output graphics card, use a Mini Dp to Dp (Mini Displayport to Displayport)  
cable or gender that supports Displayport1.4. (Sold separately)  
screensaver if possible.  
when connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power  
outlet.  
The monitor may flicker when turned on in an area where the temperature is low. This is normal.  
Sometimes red, green, or blue spots may appear on the screen. This is normal.  
Connecting to a pC  
This monitor supports the *plug and play feature.  
* plug and play: A feature that allows you to add a device to your computer without having to reconfigure  
anything or install any manual drivers.  
HDmI Connection  
Transmits digital video and audio signals from your pC to the monitor.  
CauTIoN  
using a DVI to HDMI / Dp (Displayport) to HDMI cable may cause compatibility issues.  
use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not  
display or a connection error may occur.  
recommended HDMI cable types  
- High-Speed HDMI®/TM cable  
- High-Speed HDMI®/TM cable with Ethernet  
8
Connecting aV Devices  
HDmI Connection  
HDMI transmits digital video and audio signals from your AV device to the monitor.  
NoTE  
using a DVI to HDMI / Dp (Displayport) to HDMI cable may cause compatibility issues.  
use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not  
display or a connection error may occur.  
recommended HDMI cable types  
- High-Speed HDMI®/TM cable  
- High-Speed HDMI®/TM cable with Ethernet  
Connecting peripherals  
Headphones Connection  
Connect peripherals to the monitor via the headphones port.  
NoTE  
peripheral devices are sold separately.  
Depending on the audio settings of the pC and external device, headphones and speaker functions may be  
limited.  
If you use angled earphones, it may cause a problem with connecting another external device to the monitor.  
Therefore, it is recommended to use straight earphones.  
Angled  
Straight  
(recommend)  
9
uSEr SETTINGS  
NoTE  
Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.  
activating the main menu  
1
2
3
press the joystick button on the bottom of the monitor.  
Move the joystick up/down and left/right to set the options.  
press the joystick button once more to exit the main menu.  
Joystick button  
button  
menu Status  
Description  
main menu disabled  
Enables the main menu.  
Exits the main menu.  
main menu enabled  
(Holding down the button more than 5 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.)  
main menu disabled  
Adjusts the monitor volume level.  
Enters the Input features.  
main menu enabled  
main menu disabled  
main menu enabled  
main menu disabled  
main menu enabled  
main menu disabled  
main menu enabled  
Adjusts the monitor volume level.  
Enters the Settings feature.  
Displays the information on the current input.  
Turns off the monitor.  
Displays the information on the current input.  
Enters the Game features.  
10  
main menu features  
main menu  
Description  
Input  
Sets input mode.  
power off  
power off  
Settings  
Game  
Turns off the monitor.  
Configures the screen settings.  
Sets the game mode for gaming.  
Exits the main menu.  
Exit  
Input  
Settings  
Exit  
Game  
menu Settings  
1
2
3
4
To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.  
Move the joystick up/down and left/right to set the options.  
To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.  
If you want to exit the OSD menu, move the joystick to until you exit.  
Quick Settings  
Input  
picture  
General  
11  
Quick Settings  
Settings > Quick Settings  
brightness  
Description  
Adjusts the color contrast and brightness of the screen.  
Contrast  
Adjusts the volume level.  
Volume  
NoTE  
You can adjust mute / unmute by moving the joystick button to in the Volume menu.  
The user can adjust it to red, green, or blue by customization.  
Sets the screen color to a reddish tone.  
Custom  
warm  
medium  
Cool  
Sets the screen color between a red and blue tone.  
Sets the screen color to a bluish tone.  
ColorTemp  
manual  
The user can fine-tune the color temperature.  
Input  
Settings > Input  
Description  
Input List  
Selects the input mode.  
Adjusts the aspect ratio of the screen.  
full wide  
original  
1:1  
Displays the video in widescreen, regardless of the video signal input.  
Displays video according to the aspect ratio of the video signal input.  
The aspect ratio is not adjusted from the original.  
aspect ratio  
NoTE  
The display may look the same for full wide , Original, and 1:1 options at the recommended resolution (3840 x 2160).  
There is no 1:1 menu on freeSync Mode. ( Go to picture Game Adjust freeSync, to set from freeSync Basic or Extended to Off)  
12  
picture  
NoTE  
The picture mode that can be set depends on the Input signal.  
[picture mode on SDr (Non-HDr) signal]  
Settings > picture  
Description  
Custom  
Allows the user to adjust each element. The color mode of the main menu can be adjusted.  
reader  
Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.  
photo  
Optimizes the screen for photos.  
Cinema  
HDr Effect  
Optimizes the screen for video.  
Optimizes the screen for high dynamic range.  
Dark room 1  
Dark room 2  
Color weakness  
This mode adjusts the brightness to the optimal level for working in a dark environment.  
This mode sets the brightness to a lower level than Dark room 1.  
This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish  
between the two colors.  
fpS Game 1  
fpS Game 2  
rTS Game  
This mode is optimized for fpS games.  
picture mode  
It has a higher Black Stabilizer value than fpS Game 1. It is suitable for very dark fpS games.  
This mode is optimized for rTS Game.  
Custom (Game)  
In this mode, users can customize various elements including game-related options.  
Ebu  
A standard TV pAL color space for broadcasting.  
A standard HDTV color space for broadcasting.  
A standard TV NTSC color space for broadcasting.  
rEC709  
SmpTE-C  
NoTE  
If the picture mode is changed, the screen may flicker or the resolution of your pC screen may be affected.  
13  
[picture mode on HDr signal]  
Settings > picture  
Description  
Optimized the screen for HDr vivid colors.  
HDr Vivid  
HDr Standard  
HDr Game  
Optimized the screen for HDr.  
Optimized the screen for HDr Games.  
Optimized the screen for HDr video.  
HDr Cinema  
picture mode  
NoTE  
HDr content may not be operated properly depending on the windows10 OS setting. please check the HDr On / Off setting of windows.  
when the HDr function is turned on, the characters or picture quality may be poor according to Graphic card performance.  
while the HDr function is on, screen flickering or cracking may occur when changing the monitor input or power on/off according to Graphic card performance.  
14  
Settings > picture  
Description  
Adjusts the brightness of the screen.  
brightness  
Contrast  
Adjusts the contrast of the screen.  
Sharpness  
Adjusts the sharpness of the screen.  
Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high quality  
video or game.  
High  
The optimized picture quality is displayed when a user wants images between low and high modes for  
comfortable viewing. It is effective for uCC or SD video.  
middle  
The optimized picture quality is displayed when a user wants smooth and natural images. It is effective for  
slow-moving pictures or still images.  
Low  
SupEr rESoLuTIoN+  
picture adjust  
off  
Select this option for everyday viewing. SupEr rESoLuTIoN+ is turned off in this mode.  
NoTE  
Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for  
normal text or for desktop icons. Doing so may result in unnecessarily high sharpness.  
Sets the offset level (for HDMI only).  
Offset: as a reference for a video signal, this is the darkest color the monitor can display.  
black Level  
High  
Keeps the current contrast ratio of the screen.  
Low  
Lowers the black levels and raises the white levels from the current contrast ratio of the screen.  
15  
Settings > picture  
Description  
provides sharper images when connected to a device supporting uLTrA HD Deep Color.  
4K@60 Hz Support format (HDmI uLTra HD Deep Color on)  
Color Depth / Chroma Sampling  
8 bit 10 bit  
resolution  
frame rate (Hz)  
YCbCr 4:2:0  
YCbCr 4:2:2  
59.94  
60.00  
3840 x 2160  
YCbCr 4:4:4  
-
-
rGB  
4K@30 Hz Support format (HDmI uLTra HD Deep Color off)  
HDmI uLTra HD Deep Color  
Color Depth / Chroma Sampling  
8 bit 10 bit  
resolution  
frame rate (Hz)  
picture adjust  
YCbCr 4:2:2  
29.97  
30.00  
3840 x 2160  
YCbCr 4:4:4  
-
-
rGB  
NoTE  
If the connected device does not support uLTrA HD Deep Color, the feature may not work properly.  
If a problem occurs, set the HDMI uLTrA HD Deep Color option to Off.  
HDMI uLTrA HD Deep Color option must be set for each HDMI port (HDMI IN 1, HDMI IN 2) separately.  
HDMI uLTrA HD Deep Color option can be changed with SET OSD Menu.  
(Settings - picture - picture Adjust - HDMI uLTrA HD Deep Color Off / On)  
on  
Adjusts the brightness automatically according to the screen.  
DfC  
off  
Disables the DfC feature.  
16  
Settings > picture  
Description  
Sets a response time for displayed pictures based on the speed of the screen.  
for a normal environment, it is recommended that you use fast.  
for a fast-moving picture, it is recommended that you use faster.  
Setting to faster may cause image sticking.  
response Time  
faster  
fast  
Sets the response time to faster.  
Sets the response time to fast.  
Normal  
off  
Sets the response time to normal.  
Does not use the response time improvement feature.  
provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.  
CauTIoN  
Game adjust  
Supported Interface: Displayport,HDMI.  
Supported Graphic Card : A graphic card that supports AMD’s freeSync is necessary.  
Supported Version : Make sure to update the graphic card to the latest driver.  
freeSync  
for more information and requirement, refer to AMD website at http://www.amd.com/freeSync  
Extended  
Enable wider frequency range of freeSync function than basic mode.  
The screen may flicker during the game play.  
basic  
Enable basic frequency range of freeSync function.  
off  
freeSync function off.  
You can control the black contrast to have better visibility in dark scenes.  
Increasing the black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark  
game screens.)  
black Stabilizer  
reducing the black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.  
17  
Settings > picture  
Description  
The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma  
value, the lighter the image becomes.  
mode 1, mode 2, mode 3  
Gamma  
If you do not need to adjust the gamma settings, select Mode 4.  
The user can adjust it to red, green, or blue by customization.  
Sets the screen color to a reddish tone.  
mode 4  
Custom  
warm  
Sets the screen color between a red and blue tone.  
Sets the screen color to a bluish tone.  
ColorTemp  
medium  
Cool  
The user can fine-tune the color temperature.  
manual  
Color adjust  
red  
Green  
blue  
You can customize the picture color using red, Green, and blue colors.  
Meets the user requirements for colors through adjusting the color and saturation of the six colors(red_Hue, red_Saturation,  
Green_Hue, Green_Saturation, blue_Hue, blue_Saturation, Cyan_Hue, Cyan_Saturation, magenta_Hue, magenta_  
Saturation, Yellow_Hue, Yellow_Saturation) and saving the settings.  
Six Color  
Adjusts the tone of the screen colors.  
Hue  
Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the  
colors become. The higher the value, the more saturated and darker the colors become.  
Saturation  
Do you want to reset your picture settings?  
picture reset  
No  
Cancel the select.  
Yes  
returns to the default settings.  
18  
General  
Settings > General  
Language  
Description  
sets the menu screen to the desired language.  
High  
saves energy using the high-efficiency sMarT Energy saving feature.  
Low  
saves energy using the low-efficiency sMarT Energy saving feature.  
off  
Disables the sMarT Energy saving feature.  
SmarT ENErGY SaVING  
NoTE  
saving Data depends on the Panel. so, these values may be different from each panel and/or panel vendor. If the sMarT EnErGY saVInG option is High or Low, monitor luminance  
become higher or lower depending on the source.  
Turns the power LED on the bottom of the monitor on or off.  
power LED  
on  
The power LED turns on automatically.  
The power LED turns off.  
off  
automatic Standby  
feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. (Off, 4 H, 6 H, and 8 H)  
Enables or disables DisplayPort 1.2.  
Displayport 1.2  
NoTE  
Be sure to configure this option according to the DisplayPort version supported by your graphics card. set this option to Disable if your graphics card does not support DisplayPort 1.2.  
This feature lets you set the sound generated from Buzzer when your monitor powers on.  
on  
Enables your monitor's buzzer.  
buzzer  
off  
Disables your monitor's buzzer.  
19  
Settings > General  
Description  
oSD Lock  
This feature disables the configuration and adjustment of menus.  
on  
Enables OsD Lock.  
Disables OsD Lock.  
off  
NoTE  
all features are disabled except Brightness, Contrast, Volume, Input List, aspect ratio, OsD Lock and Information.  
oSD Size  
Information  
reset  
User can select OsD size to Large or small.  
The display information will be shown the Model, serial number, Total Power On Time, resolution.  
Do you want to reset your settings?  
No  
Cancel the select.  
Yes  
returns to the default settings.  
20  
TroubLESHooTING  
Nothing is displayed on the screen.  
Is the monitor's power cord plugged in?  
Is the power LED on?  
Check if the power cord is correctly plugged into the power outlet.  
Check the power cable connection and press the power button.  
Check that the connected input is enabled (Settings > Input).  
Is the power on and the power LED displaying white?  
Does the No Signal message appear or is the screen not  
displayed?  
This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.  
If the screen is not displayed after reconnecting the signal cable, set as below.  
- HDMI Input: set HDmI uLTra HD Deep Color to off in the monitor's General settings.  
Is the out of range message being displayed?  
This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. Please see the Product  
specification section of this manual to set the appropriate frequency.  
Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.  
Did you select the appropriate resolution?  
If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended resolution.  
not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the  
display.  
The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of  
the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.  
Does image sticking occur even when the monitor is  
turned off?  
Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.  
To extend the lifetime of the monitor, use a screensaver.  
are there spots on the screen?  
when using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD screen. It is not an error, nor is it related  
to the monitor's performance.  
21  
Some features are disabled.  
are some functions not available when you press the  
The OsD is locked. Disable oSD Lock in General.  
Menu button?  
Do you see an "unrecognized monitor, plug and play (VESa DDC) monitor found" message?  
Have you installed the display driver?  
Be sure to install the display driver from our web site: http://www.lg.com.  
Make sure to check if the graphics card supports Plug and Play function.  
No sound from the headphone port.  
are images displayed without sound?  
Make sure that the headphone port connections are made properly.  
Try increasing the volume with the joystick.  
set the audio output of the PC to the monitor you are using. (The settings may differ depending on the operating system (Os) you use.)  
22  
proDuCT SpECIfICaTIoN  
Color Depth  
8-bit / 10-bit color is supported.  
Max resolution  
3840 x 2160 @ 60 Hz  
3840 x 2160 @ 60 Hz  
resolution  
recommended resolution  
Power rating  
19 V  
3.3 a  
On mode: 50 wTyp. (Outgoing condition)**  
sleep Mode ≤ 0.5 w  
power Sources  
Power Consumption  
Off Mode ≤ 0.3 w  
Type Da-65G19, asian Power Devices Inc. production  
aC/DC adaptor  
Or type LCaP39, LIEn CHanG ELECTrOnIC EnTErPrIsE production  
Output: 19 V 3.42 a  
Operating Conditions  
Temperature  
Humidity  
0 °C to 40 °C  
Less than 80 %  
-20 °C to 60 °C  
Less than 85 %  
Environmental Conditions  
storing Conditions  
Temperature  
Humidity  
Monitor size (width x Height x Depth)  
with stand  
Dimensions  
728.1 x 518.2 x 208.8 (mm)  
728.1 x 424.6 x 49.9 (mm)  
6.2 kg  
without stand  
with stand  
weight (without packaging)  
without stand  
5.3 kg  
specifications are subject to change without notice.  
* The power consumption level can be different by operating condition and monitor setting.  
** The On mode power consumption is measured with LGE test standard (full white pattern,Maximum resolution).  
23  
factory Support mode (preset mode, pC)  
HDmI  
Display modes (resolution)  
Horizontal frequency(kHz)  
Vertical frequency(Hz)  
polarity(H/V)  
remarks  
640 x 480  
800 x 600  
1024 x 768  
1152 x 864  
31.469  
37.879  
48.363  
54.347  
59.94  
60.317  
60  
-/-  
+/+  
-/-  
60.05  
+/+  
1280 x 720  
1280 x 800  
1280 x 1024  
1600 x 900  
1920 x 1080  
45  
60  
+/+  
-/+  
49.702  
63.981  
60  
59.810  
60.02  
60  
+/+  
+/+  
+/-  
67.5  
60  
2560 x 1440  
3840 x 2160  
88.79  
67.5  
59.95  
30  
+/-  
+/-  
when HDMI ULTra HD Deep Color is set  
to On  
3840 x 2160  
135  
60  
+/-  
24  
Displayport  
Display modes (resolution)  
Horizontal frequency(kHz)  
Vertical frequency(Hz)  
polarity(H/V)  
remarks  
640 x 480  
800 x 600  
1024 x 768  
1152 x 864  
31.469  
37.879  
48.363  
54.347  
59.94  
60.317  
60  
-/-  
+/+  
-/-  
60.05  
+/+  
1280 x 720  
1280 x 800  
1280 x 1024  
1600 x 900  
45  
60  
+/+  
-/+  
49.702  
63.981  
60  
59.810  
60.02  
60  
+/+  
+/+  
1920 x 1080  
2560 x 1440  
3840 x 2160  
3840 x 2160  
67.5  
60  
+/-  
+/-  
+/-  
+/-  
88.79  
66.66  
133.32  
59.95  
30  
60  
25  
HDmI Timing (Video)  
factory support mode(preset mode)  
Horizontal frequency(kHz)  
Vertical frequency(Hz)  
remarks  
480p  
720p  
31.5  
45.0  
60  
60  
1080p  
2160p  
67.5  
135  
60  
60  
when HDMI ULTra HD Deep Color is set to On  
power LED  
mode  
LED Color  
On Mode  
white (for a few seconds)  
sleep Mode  
Off  
Off Mode  
Off  
26  
The model and serial number of the product are located on the back and on one side of the product.  
record them below in case you ever need service.  
Model  
serial no.  

Xerox Pasher 6125 User Manual
Trion Air Boss 22 Series User Manual
Sharp Jw 50fl User Manual
Samsung Aw0510b User Manual
Porter Cable 885942 699 User Manual
LG DM2752D User Manual
JONSERED GR2036 User Manual
HP ELITEDESK 800 G2 User Manual
GE DDG7986L User Manual
BLACK DECKER PV1820L User Manual