*MFL718019722201rev01*
ART10*
Disassembly
Position the screen vertically.
Push the top of the screen lightly in the
direction of the arrow to disassemble
a part of the cover space.
Use a wedge or pull it with your hand
to completely disassemble the cover.
1
2
3
Caution
oid pushing it hard.
ere is a risk of damage.
Position the screen horizontally and
disassemble the cable holder screw.
Lower the rear lever and push the bottom
of the screen forward, as shown in the figure.
Lift the screen, separate the top
of the screen, and hold the screen.
4
7
5
6
Keep the disassembled screen
close to the stand at a distance
of 10 cm or less.
M4L10
1X
Press the plug lock, push it in the direction of the arrow,
and then disassemble the screen completely.
Lay the stand on the box packaging, remove the four screws,
and then disassemble the stand bar.
8
※ Do not lift the plug or pull it downward
4X
when disassembling the screen.
|