OWNER’S MANUAL
LED LCD COMPUTER
MONITOR
(LED Computer Monitor*)
* Disclaimer : LG LED Monitor applies LCD screen with LED backlights.
This product is a computer monitor and not for television purpose.
Please read this manual carefully before operating your set and retain it for
future reference.
26WQ500
29WQ500/29WQ50T
34WQ500
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
Supported Drivers and Software
ASSEMBLING AND PREPARING
Drivers and Software
Monitor Driver
Installation Priority
Recommended
Recommended
Optional
CAUTION
•
•
•
•
•
•
Always use genuine LG components to ensure safety and product performance.
The product warranty will not cover damage or injury caused by the use of unauthorized components.
It is recommended that use the supplied components.
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
Illustrations in this document represent typical procedures, so they may look different from the actual product.
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.)
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
and could result in personal injury.
When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
For wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material
in raw material.With no peeled-off appearance, it has good durability. Please use it with confidence because
there is no problem in using the product at all.
OnScreen Control
Dual Controller
NOTE
•
•
Low Blue Light is reducing the harmful blue light content.
Proper break times, looking at distance objects and eye exercises have proven effective on reducing eye strain.
•
•
•
•
NOTE
•
•
The components may look different from those illustrated here.
Without prior notice, all product information and specifications contained in this manual are subject to change
to improve the performance of the product.
•
•
To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
The power cord provided may differ depending upon the region.
3
Product and Button Description
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•
•
•
•
•
•
Place the monitor in the original box or packing material before attempting to move it.
Before moving or lifting the monitor, disconnect the power cord and all other cables.
Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
When holding the monitor, the screen should face away from you to prevent it from being scratched.
When transporting the monitor, do not expose the monitor to shock or excessive vibration.
When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
NOTE
•
The joystick button is located at the bottom of the monitor.
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/
down with your finger.
Basic Functions
CAUTION
Press the joystick button once with your finger
to turn on the monitor.
Power on
•
•
Avoid touching the monitor screen as much as possible.
- This may result in damage to the screen or some of the pixels used to create images.
If you use the monitor panel without the stand base, its joystick button may cause the monitor to become
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick
button to malfunction.
Press and hold the joystick button once more
than 3 seconds with your finger to turn off the
monitor.
Power off
You can control the volume by moving the
joystick button left/right.
/
Volume control
4
Installing on a Table
Adjusting the Angle
•
Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm away from
the wall to ensure sufficient ventilation.
1
2
Place the monitor mounted on the stand base in an upright position.
Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing
experience.
WARNING
100 mm
100 mm
•
•
To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
Be careful not to touch or press the screen area when adjusting the angle of the monitor.
100 mm
100 mm
CAUTION
•
•
Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•
If you need another power cord, please contact your local dealer or the nearest retail store.
5
Using the Kensington Lock
Installing the Wall Mount Plate
The connector for the Kensington security system is located at the bottom of the monitor.
This monitor meets the specifications for the wall mount plate or other compatible devices.
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
NOTE
•
•
•
The wall mount plate is sold separately.
For more information on installation, refer to the wall mount plate’s installation guide.
Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
Connect the monitor to a table using the Kensington security system cable.
•
Remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.
Installing on the Wall
Install the monitor at least 100 mm away from the wall and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail
store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.
100 mm
NOTE
•
The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
100 mm
100 mm
100 mm
6
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
CAUTION
•
•
Unplug the power cord before moving or installing the monitor to avoid electric shock.
Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead
to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation
instructions.
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or
misuse of inappropriate components will not be covered by the product warranty.
When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.
Wall Mount (mm)
100 x 100
M4 x L10
4
Standard screw
•
•
•
•
Number of screws
Wall Mount Plate (Optional)
LSW 149
NOTE
•
A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable
for any accidents relating to the use of non-standard screws.
•
•
•
The wall mount kit includes the installation guide and all necessary parts.
The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product.
•
For more information, please refer to the user manual for the wall mounting bracket.
7
DisplayPort Connection (for 29WQ500/34WQ500 only)
Transmits digital video and audio signals from your PC to the monitor.
USING THE MONITOR
•
Illustrations in this manual may differ from the actual product.
NOTE
Press the joystick button, go to Settings Input, and then select the input option.
•
•
There may be no video or audio output depending on the DP (DisplayPort) version of the PC.
If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort)
cable or gender that supports DisplayPort1.2 or 1.4. (Sold separately)
CAUTION
•
•
Do not press the screen for a prolonged time. This may cause image distortion.
Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC
screensaver if possible.
Connecting Peripherals
•
When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet.
Headphones Connection
Connect peripherals to the monitor via the headphones port.
•
•
The monitor may flicker when turned on in an area where the temperature is low. This is normal.
Sometimes red, green, or blue spots may appear on the screen. This is normal.
NOTE
•
•
Peripheral devices are sold separately.
Depending on the audio settings of the PC and external device, headphones and speaker functions may be
limited.
Connecting to a PC
•
This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.
•
If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Therefore, it is recommended to use straight earphones.
HDMI Connection
Transmits digital video and audio signals from your PC to the monitor.
CAUTION
•
•
Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
Angled
Straight
(Recommend)
•
Recommended HDMI cable types
- High-Speed HDMI®/TM cable
- High-Speed HDMI®/TM cable with Ethernet
8
USER SETTINGS
NOTE
•
Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
Activating the Main Menu
1
2
3
Press the joystick button on the bottom of the monitor.
Move the joystick up/down and left/right to set the options.
Press the joystick button once more to exit the main menu.
Joystick Button
Button
Menu Status
Description
Main menu disabled
Enables the main menu.
Exits the main menu.
Main menu enabled
(Holding down the button more than 3 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.)
Main menu disabled
Adjusts the monitor volume level.
Enters the Input features.
Main menu enabled
Main menu disabled
Main menu enabled
Main menu disabled
Main menu enabled
Main menu disabled
Main menu enabled
Adjusts the monitor volume level.
Enters the Settings feature.
Displays the information on the current input.
Turns off the monitor.
Displays the information on the current input.
Enters the Picture Mode feature.
9
Main Menu Features
Main Menu
Description
Power Off
Input
Sets input mode.
Power Off
Settings
Turns off the monitor.
Configures the screen settings.
Sets the picture mode.
Exits the main menu.
Settings
Input
Exit
Picture Mode
Exit
Picture Mode
Menu Settings
1
2
3
4
To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.
Move the joystick up/down and left/right to set the options.
To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
If you want to exit the OSD menu, move the joystick to until you exit.
Quick Settings
NOTE
Input
Picture
General
•
•
: On
: Off
10
Quick Settings
Settings > Quick Settings
Brightness
Description
Adjusts the contrast and brightness of the screen.
Contrast
Volume
Adjusts the volume level.
NOTE
•
You can adjust Mute / Unmute by moving the joystick button to in the Volume menu.
Color Temp
Custom
Warm
The user can adjust it to red, green, or blue by customization.
Sets the screen color to a reddish tone.
Medium
Cool
Sets the screen color to between a red and blue tone.
Sets the screen color to a bluish tone.
Manual
The user can fine - tune the color temperature.
Input
Settings > Input
Description
Input List
Selects the input mode.
Aspect Ratio
Adjusts the aspect ratio of the screen.
Full Wide
Original
Displays the video in widescreen, regardless of the video signal input.
Displays video according to the aspect ratio of the video signal input.
Enlarges the screen with an aspect ratio of 21:9.
Cinema 1
Cinema 2
Enlarges the screen with an aspect ratio of 21:9, including the black box at the bottom for subtitles.
Auto Input Switch
When automatic input switch is set to On, display will automatically switch to new input when connected.
On
Off
Enables Auto Input Switch.
Disables Auto Input Switch.
11
Picture
NOTE
•
The Picture Mode that can be set depends on the Input signal.
Settings > Picture
Description
SDR signal
HDR signal
Picture Mode
Custom
Vivid
Allows the user to adjust each element.
O
O
O
O
O
O
O
O
O
O
X
X
O
O
O
X
Heightens contrast, brightness and sharpness to display vivid images.
Optimizes the screen for high dynamic range.
HDR Effect
Reader
Cinema
FPS
Optimizes the screen for reading documents. You can brighten the screen in the OSD menu.
Optimizes the screen to improve the visual effects of a video.
This mode is optimized for FPS games.
RTS
This mode is optimized for RTS Game.
Color Weakness
This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish
between the two colors.
NOTE
•
If the Picture Mode is changed, the screen may flicker or the resolution of your PC screen may be affected.
12
Settings > Picture
Description
Picture Adjust
Brightness
Adjusts the color contrast and brightness of the screen.
Adjusts the sharpness of the screen.
Contrast
Sharpness
SUPER RESOLUTION+
High
Optimizes the screen for crystal clear images. Best for high-definition video or games.
Middle
Optimizes the screen for comfortable viewing, with images at the middle level between the low and high modes. Best for UCC or SD
videos.
Low
Off
Optimizes the screen for smooth and natural images. Best for still images or images with less movement.
Displays in the most common setting. Disables SUPER RESOLUTION+.
NOTE
•
Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for normal text or for desktop icons.
Doing so may result in unnecessarily high sharpness.
Black Level
Sets the offset level (for HDMI only).
Offset: as a reference for a video signal, this is the darkest color the monitor can display.
•
High
Low
Keeps the current contrast ratio of the screen.
Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
Adjusts the brightness automatically according to the screen.
Disables the DFC feature.
DFC
On
Off
13
Settings > Picture
Description
Game Adjust
Response Time
Sets a response time for displayed pictures based on the movement of the picture on the screen.
For a normal environment, it is recommended that you use Fast. When there is a lot of motion, it is recommended that you use Faster.
Once Faster Mode is selected, Motion Blur may occur depending on the content.
Faster
Fast
Sets the response time to faster.
Sets the response time to fast.
Normal
Off
Sets the response time to normal.
Does not use the response time improvement feature.
FreeSync
Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.
CAUTION
•
•
•
•
Supported Interface: HDMI, DisplayPort
Supported Graphic Card: A graphic card that supports AMD’s FreeSync is necessary.
Supported Version: Make sure to update the graphic card to the latest driver.
For more information and requirement, refer to AMD website at http://www.amd.com/FreeSync.
On
Off
FreeSync function on.
FreeSync function off.
Black Stabilizer
You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.
14
Settings > Picture
Description
Game Adjust
1ms Motion Blur Reduction On
This mode minimizes motion blur in fast-moving videos.
This function is available for the following vertical frequency. (75Hz)
Turns 1ms Motion Blur Reduction Mode off.
Off
NOTE
•
•
•
•
•
To reduce motion blur, brightness is reduced with backlight control.
1ms Motion Blur Reduction and FreeSync feature can not used at the same time.
This function is game-optimized.
It is recommended to turn off when you are not using the gaming function.
Flicker may occur during 1ms Motion Blur Reduction operation.
Crosshair
Crosshair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the Crosshair that fits their gaming environment
among four different Crosshairs.
•
When the monitor is off or enters energy saving mode, the Crosshair feature is automatically turned Off.
15
Settings > Picture
Description
Color Adjust
Gamma
Mode 1, Mode 2,
Mode 3
The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes.
Mode 4
If you do not need to adjust the gamma settings, select Mode 4.
Color Temp
Set your own color temperature.
Custom
Warm
The user can adjust it to red, green, or blue by customization.
Sets the screen color to a reddish tone.
Medium
Cool
Sets the screen color to between a red and blue tone.
Sets the screen color to a bluish tone.
Manual
The user can fine - tune the color temperature.
Red, Green, Blue
Six Color
You can customize the picture color using Red, Green, and Blue colors.
Meets the user requirements for colors by adjusting the hue and saturation of the six colors (red, green, blue, cyan, magenta, and yellow) and then saving the
settings.
Hue
Adjusts the tone of the screen colors.
Saturation
Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors become. The higher the value,
the more saturated and darker the colors become.
Picture Reset
Do you want to reset your picture settings?
No
Cancel the select.
Yes
Returns to the default settings.
16
General
Settings > General
Language
Description
Sets the menu screen to the desired language.
SMART ENERGY SAVING
Conserve energy by using luminance compensation algorithm.
High
Low
Off
Saves energy using the high-efficiency SMART ENERGY SAVING feature.
Saves energy using the low-efficiency SMART ENERGY SAVING feature.
Disables the feature.
NOTE
•
•
The value of energy saving data may differ depending on panel and panel suppliers.
If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become lower or higher depend on source.
Power LED
On
Off
The power LED turns on.
The power LED turns off.
Automatic Standby
DisplayPort Version
If there is no operation on the monitor for a certain period of time, the monitor will automatically switch to standby mode. (8H, 6H, 4H and Off)
Set DisplayPort Version to the same version as the connected external device. (1.4, 1.2, and 1.1)
To use the HDR function, set to 1.4.
for 29WQ500/34WQ500 only
OSD Lock
This feature disables the configuration and adjustment of menus.
On
Off
Enables OSD Lock.
Disables OSD Lock.
NOTE
All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock, Information.
•
17
Settings > General
Description
Deep Sleep Mode
When Deep sleep mode is enabled, power consumption is minimized while the monitor is in standby mode.
On
Off
Enables Deep sleep Mode.
Disables Deep sleep Mode.
NOTE
USB Charging and HuB functions will not work in standby mode while Deep sleep Mode is enabled in standby mode.
The following display information will be shown; Total Power On Time, Resolution.
•
Information
Reset to Initial Settings
Do you want to reset your settings?
No
Cancel the reset.
Yes
Returns to the default settings.
18
TROUBLESHOOTING
Nothing is displayed on the screen.
Is the monitor's power cord plugged in?
Is the power LED on?
•
•
•
•
•
Check if the power cord is correctly plugged into the power outlet.
Check the power cable connection and press the power button.
Is the power on and the power LED displaying white?
Is the No Signal message being displayed?
Is the Out of Range message being displayed?
Check that the connected input is enabled (Settings > Input).
This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. Please see the Product
Specification section of this manual to set the appropriate frequency.
Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution?
•
•
•
If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended
resolution.
Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or
misalignment of the display.
The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the
performance of the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.
Does image sticking occur even when the monitor is turned off?
Are there spots on the screen?
•
•
Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.
To extend the lifetime of the monitor, use a screensaver.
•
When using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD screen. It is not an error, nor
is it related to the monitor's performance.
Some features are disabled.
Are some functions not available when you press the Menu button?
•
The OSD is locked. Disable OSD Lock in General.
19
Do you see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message?
Have you installed the display driver?
•
•
Make sure to check if the graphics card supports Plug and Play function.
No sound from the headphone port.
Are images displayed without sound?
•
•
•
Make sure that the headphone port connections are made properly.
Try increasing the volume with the joystick.
Set the audio output of the PC to the monitor you are using. (The settings may differ depending on the operating system (OS) you use.)
20
PRODUCT SPECIFICATION
26WQ500
Color Depth
8-bit / 10-bit color is supported.
Resolution
Max Resolution
2560 x 1080 @ 75 Hz
2560 x 1080 @ 60 Hz
Recommended Resolution
Power Rating
Power Sources
19 V
1.3 A
Power Consumption
On mode: 14 W Typ. (ENERGY STAR® standard)*
Sleep Mode (Standby Mode) ≤ 0.3 W **
Off Mode ≤ 0.3 W
AC/DC Adapter
Output: 19 V
1.3 A
Environmental Conditions
Operating Conditions
Temperature
Humidity
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
Storing Conditions
Temperature
Humidity
Dimensions
Monitor Size (Width x Height x Depth)
With Stand (mm)
635.7 x 385.3 x 211.5
Without Stand (mm)
With Stand (kg)
635.7 x 292.8 x 46.0
Weight (Without Packaging)
3.6
3.1
Without Stand (kg)
The specifications are subject to change without notice.
The symbol means alternating current, and the symbol means direct current.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
21
PRODUCT SPECIFICATION
29WQ500
Color Depth
Resolution
8-bit / 10-bit color is supported.
Max Resolution
2560 x 1080 @ 100 Hz
2560 x 1080 @ 60 Hz
Recommended Resolution
Power Rating
Power Sources
19 V
1.3 A
Power Consumption
On mode: 16.24 W Typ. (ENERGY STAR® standard)*
Sleep Mode (Standby Mode) ≤ 0.3 W **
Off Mode ≤ 0.3 W
AC/DC Adapter
Output: 19 V
1.3 A
Environmental Conditions
Operating Conditions
Temperature
Humidity
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
Storing Conditions
Temperature
Humidity
Dimensions
Monitor Size (Width x Height x Depth)
With Stand (mm)
688.5 x 406.8 x 223.8
Without Stand (mm)
With Stand (kg)
688.5 x 313.4 x 45.3
Weight (Without Packaging)
4.5
4.0
Without Stand (kg)
The specifications are subject to change without notice.
The symbol means alternating current, and the symbol means direct current.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
22
PRODUCT SPECIFICATION
29WQ50T
Color Depth
Resolution
8-bit / 10-bit color is supported.
Max Resolution
2560 x 1080 @ 100 Hz
2560 x 1080 @ 60 Hz
Recommended Resolution
Power Rating
Power Sources
19 V
1.3 A
Power Consumption
On mode: 22 W Typ. (Outgoing condition)*
Sleep Mode (Standby Mode) ≤ 0.3 W **
Off Mode ≤ 0.3 W
AC/DC Adapter
Output: 19 V
1.3 A
Environmental Conditions
Operating Conditions
Temperature
Humidity
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
Storing Conditions
Temperature
Humidity
Dimensions
Monitor Size (Width x Height x Depth)
With Stand (mm)
688.5 x 406.8 x 223.8
Without Stand (mm)
With Stand (kg)
688.5 x 313.4 x 45.3
Weight (Without Packaging)
4.5
4.0
Without Stand (kg)
The specifications are subject to change without notice.
The symbol means alternating current, and the symbol means direct current.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
23
PRODUCT SPECIFICATION
34WQ500
Color Depth
Resolution
8-bit / 10-bit color is supported.
Max Resolution
2560 x 1080 @ 100 Hz
2560 x 1080 @ 60 Hz
Recommended Resolution
Power Rating
Power Sources
19 V
1.6 A
Power Consumption
On mode: 17.76 W Typ. (ENERGY STAR® standard)*
Sleep Mode (Standby Mode) ≤ 0.3 W **
Off Mode ≤ 0.3 W
AC/DC Adapter
Output: 19 V
1.7 A
Environmental Conditions
Operating Conditions
Temperature
Humidity
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
Storing Conditions
Temperature
Humidity
Dimensions
Monitor Size (Width x Height x Depth)
With Stand (mm)
816.5 x 483.7 x 223.3
Without Stand (mm)
With Stand (kg)
816.5 x 365.3 x 45.5
Weight (Without Packaging)
6.9
6.0
Without Stand (kg)
The specifications are subject to change without notice.
The symbol means alternating current, and the symbol means direct current.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
24
Factory Support Mode (Preset Mode, PC)
26WQ500
Resolution
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
Polarity (H/V)
Remarks
640 x 480
640 x 480
31.469
37.5
59.94
75
-/-
-/-
800 x 600
37.879
46.875
48.363
60.123
53.697
45
60.317
75
+/+
+/+
-/-
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 1024
1280 x 1024
1600 x 900
1680 x 1050
1920 x 1080
2560 x 1080
2560 x 1080
60
75.029
60
+/+
-/+
+/+
+/+
+/+
+/+
-/+
+/-
-/+
-/+
60
63.981
79.976
60
60.02
75.025
60
65.29
67.5
59.954
60
66.636
83.915
59.98
74.99
Recommend Mode
25
29WQ500/29WQ50T 34WQ500
Resolution
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
Polarity (H/V)
Remarks
640 x 480
800 x 600
31.469
37.879
48.363
67.5
59.94
60.317
60
-/-
+/+
-/-
1024 x 768
1920 x 1080
2560 x 1080
2560 x 1080
2560 x 1080
2560 x 1440
60
+/-
-/+
-/+
+/-
+/-
66.636
83.915
113.3
59.98
74.99
100.0
59.95
Recommend Mode
for HDMI only
88.79
26
HDMI Timing (Video)
Factory support mode
(Preset Mode)
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
Remarks
480p
576P
31.5
60
50
31.25
720p
720p
37.5
45.0
56.25
67.5
67.5
50
60
50
60
30
for 26WQ500 only
1080p
1080p
2160p
Power LED
Mode
On Mode
LED Color
White (For a few seconds)
Sleep Mode (Standby Mode)
Off Mode
Off
Off
27
Only for 26WQ500/29WQ500/34WQ500
The model and serial number of the product are located on the back and on one side of the product.
Record them below in case you ever need service.
This Product qualifies for ENERGY STAR®
Changing the factory default configuration and settings or enabling certain optional features
and functionalities may increase energy consumption beyond the limits required for ENERGY
Model
STAR®certification.
Serial No.
Refer to ENERGYSTAR.gov for more information on the ENERGY STAR®program.
|