USER MANUAL
Levoit VeSync Core™ 400S
Smart True HEPA Air Purifier
Product Series: Core 400S
Model: Core 400S
Questions or Concerns?
Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT
READ AND SAVE THESE
INSTRUCTIONS
SAFETY INFORMATION
To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines.
•
WARNING: To reduce the risk of fire
or electric shock, do not use this air
purifier with any solid-state speed
controls (such as a dimmer switch).
Not for commercial use. Household
use only.
General Safety
•
•
Only use your air purifier as described in
this manual.
•
Do not use without removing the plastic
wrap from the filter. The air purifier will
not filter air, and may overheat, causing
a fire hazard.
Power & Cord
•
•
Do not use the air purifier outdoors.
Keep the air purifier away from water,
and wet or damp areas. Never place
in water or liquid.
•
Keep the air purifier near the outlet it is
plugged into.
•
•
Never place the cord near any heat source.
Do not cover the cord with a rug, carpet,
or other covering. Do not place the cord
under furniture or appliances.
•
•
•
Do not use in excessively humid areas.
Keep the air purifier away from heat sources.
Do not use where combustible gases,
vapors, metallic dust, aerosol (spray)
products, or fumes from industrial oil
are present.
•
•
Keep the cord out of areas where people
walk often. Place the cord where it will
not be tripped over.
•
•
•
•
•
Keep 5 ft / 1.5 m away from where oxygen
is being administered.
This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of electric shock, this plug is
intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
This air purifier uses standard US 120V,
60Hz outlets. If using outside the US,
check for compatibility.
Supervise children when they are near
the air purifier.
Do not place anything into any opening in
the air purifier.
Do not sit on or place heavy objects on
the air purifier.
Keep the inside of the air purifier dry. To
prevent moisture buildup, avoid placing in
rooms with major temperature changes or
underneath air conditioners.
•
•
•
Always unplug the air purifier before
servicing (such as changing the filter).
Do not use the air purifier if it is damaged
or not working correctly, or if the cord or
plug is damaged. Do not try to repair it
yourself. Contact Customer Support
(see page 20).
Electromagnetic Fields (EMF)
Your Levoit air purifier complies with all
standards regarding electromagnetic fields
(EMF). If handled properly and according
to the instructions in this user manual, the
appliance is safe to use based on scientific
evidence available today.
3
GETTING TO KNOW YOUR SMART AIR PURIFIER
A. Fan Speed Indicators
B. Fan Speed Button
C. Sleep Mode Button
D. Air Quality Indicator Rings
E. Check Filter Indicator Reset Button
F. Check Filter Indicator
G. Timer Button
L. Display Off Button
M. Display Lock Indicator
N. Display Lock Button
O. Air Outlets
P. Housing
Q. Air Inlets
R. AirSight™ Plus Laser Dust Sensor
S. Anti-Skid Pads
H. On/Off Button
I. Wi-Fi® Indicator
T. Filter Cover
J. Auto Mode Button
K. PM2.5/Timer Display
U. True HEPA 3-Stage Original Filter
A
I
B
C
D
J
K
S
T
E
F
L
M
N
G
H
U
O
P
R
Q
Back
Front, upside down
4
CONTROLS & DISPLAY
Timer Button
On/Off Button
•
Cycles through timer
options (see page 9).
•
•
Turns the air purifier on/off.
Press and hold to configure
the air purifier. See the
VeSync in-app instructions
for more information.
•
Press and hold
for 2
seconds to begin cycling
through the timer options
in 1-hour increments.
•
Press and hold to reset the
air purifier and disconnect
from Wi-Fi (see page 7).
Auto Mode Button
•
Turns Auto Mode on/off
(see page 8).
Air Quality Indicator Rings
•
These indicators use an
automatic sensor to display
the air quality: Blue (Very
Good), Green (Good),
Orange (Moderate), and
Red (Bad).
Display Off Button
•
Turns the display off
(see page 9).
•
Tap any button (except
)
to turn the display back on.
Wi-Fi® Indicator
•
Turns on, off, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
Display Lock Button
•
Prevents current settings
from being changed (see
page 9). Press and hold for
3 seconds to turn Display
Lock on/off.
Fan Speed Button
•
The Display Lock Indicator
•
Cycles through fan speeds:
low (1 indicator will light up),
medium (2 indicators), high
(3 indicators), and turbo
(4 indicators).
(
) will blink when any
other button is tapped to
indicate that Display Lock
is on.
•
Tapping the Fan Speed
Button while the air purifier
is in Auto Mode or Sleep
Mode (if the display is on)
will exit that mode.
Check Filter Indicator Reset
Button
•
Press and hold for 3
seconds to reset the
Check Filter Indicator.
•
The Check Filter Indicator
lights up when the filter
should be checked (see
page 13).
Sleep Mode Button
•
Turns Sleep Mode on/off
(see page 8).
5
GETTING STARTED
3. Replace the filter cover and twist
1. Flip the air purifier over or turn it
on its side. Twist the filter cover
counterclockwise and remove it.
[Figure 1.1]
clockwise to lock. [Figure 1.3]
cover should
snap shut
Figure 1.3
Figure 1.1
2. Remove the filter from its plastic
packaging and place the filter back
into the air purifier. [Figure 1.2]
4. Place the purifier on a flat, stable surface
with the display facing up. Allow at least
15 inches / 38 cm of clearance on all
sides. Keep away from anything that
would block airflow, such as curtains.
[Figure 1.4]
15 in /
38 cm
15 in /
38 cm
Figure 1.4
Figure 1.2
6
VeSync App Setup
USING YOUR SMART
AIR PURIFIER
Note: Using the VeSync app allows you to control
your air purifier remotely and access additional
functions and features.
1. To download the VeSync app, scan the
QR code or search “VeSync” in the Apple
App Store® or Google Play Store.
2. Open the VeSync app. Log In or Sign Up.
3. Follow the in-app instructions to set up
1. Plug in and tap
to turn on the air
your smart air purifier.
purifier. The fan will start on low speed.
[Figure 2.1]
2. Optionally, tap
to change fan speed
between low, medium, high, and turbo.
Note:
•
The fan speed indicators will light
up when active. 1 indicator will light
up for low, 2 for medium, 3 for high,
and 4 for turbo.
•
•
Turbo speed is the loudest, but cleans
air the quickest.
For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at turbo speed for 15–20
minutes before using a lower speed.
Note:
•
To disconnect Wi-Fi, press and hold the
On/Off button for 15 seconds until the
Wi-Fi indicator turns off. This will restore
the smart air purifier’s default settings
and disconnect it from the VeSync app.
•
To effectively clean air, keep windows
and doors closed while the air purifier
is on.
•
To reconnect, please follow the instructions
in the VeSync app for adding a device.
3. Tap
to turn off the air purifier.
Connect with Amazon Alexa or
Google Assistant™
You can use the VeSync app to connect
your smart air purifier to Amazon Alexa or
Google Assistant™. Please follow the in-app
instructions to set up your voice assistant.
Note: You must create your own VeSync account
to access voice assistants.
Figure 2.1
7
USING YOUR PURIFIER (CONT.)
Sleep Mode
Note:
•
The air purifier will take 5 seconds
to detect the air quality each time
it is turned on. During this time, the
air quality indicator rings will be
blue. After 5 seconds, the air quality
indicator rings will change color
based on the detected air quality.
Sleep Mode operates quietly by using a fan
speed lower than low speed.
1. Tap
to turn Sleep Mode on/off.
2. Sleep Mode will turn off the display after
3 seconds if no other buttons are tapped.
•
•
Auto Mode does not use the turbo
fan speed.
Note:
The VeSync app also supports
additional auto modes: Quiet Auto
Mode and Efficient Auto Mode
(see page 10).
•
•
When the display is turned off, tap any
button (except ) to turn the display
back on. If you don’t tap another
button, the display will turn off again
after 3 seconds.
The Check Filter Indicator will still turn
on and stay on if it’s time to check your
filter (see page 13).
PM2.5 Display
The PM2.5 value on the display shows the
amount of airborne particles (µg) that are
detected per 1 cubic meter (m³) of air volume.
Auto Mode
PM2.5 refers to particulate matter (PM) that
is less than or equal to 2.5 microns (µm) in
diameter. These particles, also known as
“fine particles”, are so small that they can only
be detected with an electron microscope,
and they stay in the air longer than heavier
particles such as dust and mold.
Auto Mode uses AirSight™ Plus, a smart
laser dust sensor inside the air purifier, to
adjust the fan speed automatically based
on air quality. For example, if the air quality
is bad, the fan will automatically be set to
high speed.
Your air purifier’s AirSight Plus Laser Dust
Sensor detects the amount of PM2.5 particles
that are in a given space (µg/m³). Generally, the
lower the number, the better your air quality.
A number above 115 indicates that there is an
unhealthy amount of fine particles in the air.
Air Quality Indicator Chart
Indicator Color
Blue
Air Quality
Auto Mode Fan Speed
PM 2.5 Range
0–35 ug/m3
36–75 ug/m3
76–115 ug/m3
> 115 ug/m3
Very Good
Good
Sleep Mode
Low
Green
Orange
Red
Moderate
Bad
Medium
High
8
USING YOUR PURIFIER (CONT.)
Timer
Display Off
You can set a timer for 1–12 hours.
This turns off the display lights on the air
purifier, including button lights and indicator
lights (except the Check Filter Indicator).
1. Tap
. The display will switch from
showing the PM2.5 reading to the time
you’ve selected.
1. Tap
to turn off the display.
2. Tap
repeatedly to select a time in
1-hour increments. If you don’t touch any
buttons for 5 seconds, the display will
switch to showing the PM2.5 reading and
the timer will start automatically.
2. Tap any button (except
or
) to
temporarily turn the display back on. If
you don’t tap another button, the display
will turn back off after 3 seconds.
3. Tap
to turn the display back on. The
display will stay on.
Note: Press and hold
cycle through timer options automatically in
1-hour increments.
for 2 seconds to
Note: The Check Filter Indicator will still
turn on and stay on if it’s time to check
your filter (see page 13).
3. The timer will count down from your
selected time.
Display Lock
Note:
•
•
While a timer is active, tapping
will
When the air purifier is on, you can lock
the display to prevent settings from being
accidentally changed. Buttons will not
respond to being tapped.
show the remaining time, rounded up to
the nearest hour. Tap
again within
5 seconds to add more time in 1-hour
increments.
1. Press and hold
for 3 seconds to lock
indicator will light up
You can see the exact remaining time in
the VeSync app.
the display. The
in the center of the display.
4. When the timer is finished, the air purifier
Note: If the display is turned off, the
indicator will flash 3 times to show that the
display has been locked, then turn off.
will turn off.
5. To cancel a timer, tap
repeatedly until
the display reads “--H”.
2. The
indicator will blink when any
other button is tapped to indicate that
Display Lock is on.
Note:
•
You can change the fan speed at any
time while the timer is on.
3. Tap and hold
again for 3 seconds
•
•
The timer will restart if the time is changed.
to unlock the display. The
will turn off.
indicator
The air purifier will remember the last timer
setting while turned off, but the timer will
be cancelled and need to be restarted.
Note:
•
You can set a timer for 1–24 hours in the
VeSync app.
•
If the display is turned off, the
indicator will flash 3 times to show
that the display has been unlocked.
•
Display Lock can still be used when
the air purifier is in Standby Mode.
9
USING YOUR PURIFIER (CONT.)
Auto Mode
Standby Mode
•
Access additional Auto Modes: Quiet
Auto Mode and Efficient Auto Mode.
The air purifier is in Standby Mode when it is
turned off, but plugged in.
•
Quiet Auto Mode uses medium fan
speed instead of the high or turbo fan
speeds, even when the air quality is
poor, to avoid making too much noise.
Note: Display Lock can be used while the
air purifier is in Standby Mode to keep
the air purifier from being turned back
on. The laser dust sensor will still detect
the surrounding air quality and give you
updates in the VeSync app.
•
Efficient Auto Mode lets you choose
the size of the area you want to
purify. The air purifier will use the
highest fan speed (turbo) to clean the
air for a designated amount of time.
This time is based on ACH 1 and the
size of the room, meaning how long
it takes for the air purifier to clean
all the air in your room one time,
regardless of the air quality. After this,
the mode will adjust the fan speed
according to the actual detected air
quality in the room.
Memory Function
When the air purifier is plugged in and turned
off, it will remember its previous fan speed,
Sleep Mode, Auto Mode, Display Lock, and
Display Off settings.
When the air purifier is unplugged and turned
off, it will only remember its previous fan
speed, Sleep Mode, and Auto Mode.
Note: Efficient Auto Mode is useful
for purifying odors from the air. The
air purifier’s sensor can only detect
particles in the air, not smells. Efficient
Auto Mode does not rely on the
sensor, but the room size instead.
Note: The air purifier will remember the last
timer setting chosen (1–12 hours), but it will
not automatically resume the timer. You will
need to restart the timer after the air purifier
is turned back on.
Schedules
Create and customize schedules for
your air purifier to match your routines.
VeSync App Functions
•
The VeSync app allows you to access
additional smart air purifier functions, including
those listed below. As the app develops, more
features may become available.
Timer Function
•
•
Set a timer between 1–24 hours.
Remote Control
Easily view the exact time remaining
on a timer.
•
Change any air purifier settings
through the app, even while
Display Lock is on.
Filter Replacement Info
•
Keep tabs on the remaining filter life
by checking the filter life percentage
in the app.
Air Quality Updates
•
•
View real-time PM2.5 updates in the app.
See your air quality history for the
previous week.
•
Shop for replacement filters.
10
ABOUT THE FILTER
The air purifier uses a 3-stage filtration
system to purify air.
A
B
C
C. Custom High-Efficiency Activated
A. Pre-Filter
Carbon Filter
•
Captures large particles such as
dust, lint, fibers, hair, and pet fur.
•
•
Physically adsorbs smoke, odors,
and fumes.
•
Maximizes the filter’s life by
protecting it.
Customized using Levoit’s exclusive
ARC Formula™ to be especially
effective for cooking smells and pet
odors in a multi-pet household.
B. H13 True HEPA Filter
•
Captures at least 99.97% of airborne
particles 0.3 microns (µm) in size.
•
•
The ARC Formula extends the life of
the filter by chemically decomposing
molecules trapped within the
Activated Carbon Filter, which
prevents oversaturation and second-
hand pollution.
•
Traps small particles such as fine
dust, smoke particles, and allergens
such as pollen and pet dander.
Filters compounds such as
formaldehyde, benzene, ammonia,
hydrogen sulfide, and volatile
organic compounds (VOCs).
Note: Levoit air purifiers filter airborne particles 0.3 microns in size. Arovast Corporation makes no
claims that this air purifier helps reduce the COVID-19 virus.
11
ABOUT THE FILTER (CONT.)
Clean Air Delivery Rate
Humidity
This air purifier has a Clean Air Delivery Rate of
260 cubic feet per minute (CFM), or 442 m³/h.
Moisture may damage the filter. This air
purifier should be used in an area with a
humidity level below 85% RH. If you use
the air purifier in excessively humid areas,
the surface of the filter may become moldy.
Clean Air Delivery Rate (CADR) measures the
efficiency of an air purifier by indicating the
volume of clean air that an air purifier produces
per minute. This is based on removal of dust,
pollen, and smoke, which are the 3 most
common indoor air pollutants. The higher the
CADR, the more particles the air purifier will
remove and the larger the area it can clean.
The rating is measured at the air purifier’s
highest speed.
Note: Water or moisture will allow mold
to grow. To solve a mold problem, get
rid of the source of the moisture and
clean up the mold.
Essential Oils
Do not add essential oils to the air purifier
or filter. The filter will become damaged
by the oil and will eventually release an
unpleasant smell. Do not use diffusers
near the air purifier.
Air Change Per Hour
The air change rate is how many times all of
the air in a room can be purified (or “changed”)
by the air purifier in 1 hour. Air changes per hour
(ACH) are calculated with the recommended
room size assuming 8 ft / 2.4 m ceilings. For
smaller rooms, the air change per hour will
increase. This air purifier has an air change
per hour of 5, which means it can change
air 5 times per hour at the max speed in a
single, closed room up to 403 ft² / 37 m². The
air purifier is effective for larger rooms, but
air purification will take longer, with fewer air
changes per hour.
Note: To effectively clean air, keep windows
and doors closed while the air purifier is on.
12
CARE & MAINTENANCE
Cleaning the Smart Air Purifier
Cleaning the Filter
•
•
Unplug before cleaning.
The outer pre-filter should be cleaned every
2–4 weeks to increase efficiency and extend
the life of your filter. Clean the pre-filter using
a soft brush or vacuum hose to remove hair,
dust, and large particles. Do not clean the
filter with water or other liquids.
Wipe the outside of the air purifier
with a soft, dry cloth. If necessary,
wipe the housing with a damp cloth,
then immediately dry.
•
•
Vacuum the inside of the air purifier.
Do not clean with abrasive chemicals
or flammable cleaning agents.
Resetting the Check
Filter Indicator
Check Filter Indicator
Reset the Check Filter Indicator when:
A.
lights up red.
will light up as a reminder to check the
filter. Depending on how often you use
the air purifier, the indicator should turn on
at about 12 months. You may not need to
change your filter yet, but you should check
1. Replace the filter (see page 14).
2. Turn on the air purifier.
3. Press and hold the
button for
it when
turns on.
3 seconds.
When your air purifier is set up with the
VeSync app, you can also check the app to
see your remaining filter life. You will also
receive a notification from VeSync when it’s
time to check your filter.
4.
will turn off when successfully
reset.
B. The filter was changed before
lit up.
1. Press and hold the
button for
The VeSync app uses a scientific algorithm to
determine your filter life based on air quality,
amount of use, and other factors. The filter life
percentage is based on 12 hours of daily use.
3 seconds.
2. The
will flash for 3 seconds.
3.
will turn off when successfully
reset.
Filter
When to Clean
How to Clean
When to Replace
Every 2–4
weeks
Use a soft brush or
vacuum hose
Pre-Filter
12 months
True HEPA
& Activated
Carbon Filter
Do not clean
13
CARE & MAINTENANCE (CONT.)
When Should I Replace the
Filter?
Replacing the Filter
1. Unplug the air purifier. Flip the air purifier
over or turn it on its side. Remove the
filter cover (see Getting Started, page 6).
The filter should be replaced every 12
months. You may need to replace your filter
earlier or later depending on how often you
use your air purifier. Using your air purifier in
an environment with relatively high pollution
may mean you will need to replace the filter
2. Remove the old filter.
3. Clean out any remaining dust or hair
inside the air purifier using a vacuum
hose. Do not use water or liquids to
clean the air purifier. [Figure 3.2]
more often, even if
is off.
You may need to replace your filter if
you notice:
4. Unwrap the new filter and place it into the
housing (see Getting Started, page 6).
•
Increased noise when the air
purifier is on
5. Replace the cover. Plug in the air purifier.
6. Reset the Check Filter Indicator
•
•
•
Decreased airflow
Unusual odors
(see page 13).
A visibly clogged filter
Storage
Note:
If not using the air purifier for an extended
period of time, wrap both the air purifier and
the filter in plastic packaging and store in a
dry place to avoid moisture damage.
•
•
To maintain the performance of your
air purifier, only use official Levoit
filters. To buy replacement filters, visit
Levoit’s online store. Go to levoit.com
for more information.
Remember to reset
after changing
the filter (see page 13).
Cleaning the AirSight Plus
Laser Dust Sensor
The AirSight Plus Laser Dust Sensor can be
blocked by dust, which affects the sensor’s
accuracy. Clean the sensor every 3 months.
Using your air purifier in an environment with
more dust may mean you will need to clean
the sensor more often.
Figure 3.2
1. Unplug the air purifier.
2. Place the end of a vacuum cleaner over
the sensor openings. [Figure 3.3]
3. Turn the vacuum on for at least 10
seconds to clean out dust.
Figure 3.3
14
TROUBLESHOOTING
Problem
Possible Solution
Air purifier will not
turn on or respond to
button controls.
Plug in the air purifier.
Check to see if the power cord is damaged. If it is, stop using the air
purifier and contact Customer Support (see page 20).
Plug the air purifier into a different outlet.
The air purifier may be malfunctioning. Contact Customer Support
(see page 20).
Airflow is significantly
reduced.
Make sure the filter is removed from its packaging and properly in
place (see page 6).
Tap
to increase the fan speed.
Leave 15 inches / 38 cm of clearance on all sides of the air purifier.
The pre-filter may be clogged by large particles, such as hair or
lint, blocking airflow. Clean the pre-filter (see page 13).
Replace the filter (see page 14).
Air purifier makes an
unusual noise while
the fan is on.
Make sure the filter is properly in place with plastic packaging
removed (see page 6).
Make sure the air purifier is operating on a hard, flat, level surface.
Replace the filter (see page 14).
The air purifier may be damaged, or a foreign object may be
inside. Stop using the air purifier and contact Customer Support
(see page 20). Do not try to repair the air purifier.
Strange smell coming
from the air purifier.
Clean the filter, or replace if necessary.
Contact Customer Support (see page 20).
Make sure not to use your air purifier in an area with high
humidity or while diffusing essential oils.
15
TROUBLESHOOTING (CONT.)
Problem
Possible Solution
Tap to increase the fan speed.
Poor air purification
quality.
Make sure no objects are blocking the sides or top of the air purifier
(the inlet or outlet).
Make sure the filter is removed from its packaging and properly in
place (see page 6).
Close doors and windows while using the air purifier.
If the room is larger than 403 ft² / 37 m², air purification will take longer.
The air purifier may not be as effective in significantly larger rooms.
Replace the filter (see page 14).
Reset the Check Filter Indicator (see page 13).
is still on after
replacing the filter.
has not turned on
within 12 months.
is a reminder for you to check the filter and will light up based
on how much the air purifier has been used (see page 13). If you
don’t use your air purifier often,
will take longer to turn on.
turned on before
12 months.
is a reminder for you to check the filter and will light up based
on how much the air purifier has been used (see page 13). If you
run your air purifier frequently,
will turn on sooner.
Air Quality Indicator
always stays red.
The AirSight Plus Laser Dust Sensor may need to be cleaned
(see page 14).
If you’re using an ultrasonic humidifier near the air purifier, the mist
may affect the accuracy of the AirSight Plus Laser Dust Sensor.
The sensor will detect the large mist particles, and the Air Quality
Indicator may turn red. Avoid using an ultrasonic humidifier near
the air purifier, or avoid using Auto Mode.
Air Quality Indicator
always stays blue,
even when the air
quality is poor.
The AirSight Plus Laser Dust Sensor detects airborne particles, but
it cannot detect gas. Make sure there isn’t gas polluting the air.
Display shows Error
Code “E1”.
The motor has malfunctioned. Please contact Customer Support
(see page 20).
If your problem is not listed, please contact Customer Support (see page 20).
16
VESYNC APP TROUBLESHOOTING
My smart air purifier isn’t connecting to the VeSync app.
•
•
•
Make sure your phone has Bluetooth® turned on and is not currently connected to
another Bluetooth device.
During the setup process, you must be on a secure 2.4GHz Wi-Fi® network. Confirm
that the network is working correctly.
Make sure the Wi-Fi password you entered is correct.
•
•
•
There should be no spaces at the beginning or end of the password.
Test the password by connecting a different electronic device to the router.
If you’re manually typing in the SSID and password, double check that both
are entered correctly.
•
Try moving your air purifier closer to the router. Your phone should be as close as
possible to your air purifier.
•
•
Your router may need to be at a higher location, away from obstructions.
Make sure your air purifier and router are away from appliances (such as microwave
ovens, refrigerators, electronic devices, etc.) to avoid signal interference.
•
•
If you’re using a VPN, make sure it’s turned off while setting up your air purifier.
Disable portal authentication for your Wi-Fi network. If portal authentication is enabled,
the air purifier will not be able to access your Wi-Fi network, and setup will fail.
Note: Portal authentication means that you need to sign in to your Wi-Fi network through
a web page before you can use the Internet.
My air purifier is offline.
•
•
•
Make sure the air purifier is plugged in and has power, then refresh the VeSync
menu by swiping down on the screen.
Make sure your router is connected to the internet and your phone’s network
connection is working.
Delete the offline air purifier from the VeSync app. Swipe left (iOS®) or press and
hold (Android™), then tap Delete. Reconfigure the air purifier with the VeSync app.
Note: Power outages, internet outages, or changing Wi-Fi routers may cause the air
purifier to go offline.
If your problem is not listed, please contact Customer Support (see page 20).
17
FEDERAL COMMUNICATION COMMISSION
INTERFERENCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC RF exposure compliance requirements, please
follow operation instructions as documented in this manual. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter. This equipment should
be installed and operated with a minimum distance of 20cm between the radiator and your
body. The availability of some specific channels and/or operational frequency bands are country
dependent and are firmware programmed at the factory to match the intended destination. The
firmware setting is not accessible by the end user.
18
WARRANTY INFORMATION
Arovast will not be liable for indirect,
Product Name Smart True HEPA Air Purifier
incidental, or consequential damages in
connection with the use of the product
covered by this warranty.
Model Core 400S
For your own reference, we strongly recommend
that you record your order ID and date of
purchase.
This warranty extends only to the original
consumer purchaser of the product and is
not transferable to any subsequent owner
of the product regardless of whether the
product is transferred during the specified
term of the warranty.
Date of Purchase
Order ID
Terms & Policy
This warranty does not extend to products
purchased from unauthorized sellers.
Arovast’s warranty extends only to products
purchased from authorized sellers that are
subject to Arovast’s quality controls and
have agreed to follow its quality controls.
Arovast Corporation (“Arovast”) warrants
this product to the original purchaser
to be free from defects in material and
workmanship, under normal use and
conditions, for a period of 1 year from
the date of original purchase.
All implied warranties are limited to the
period of this limited warranty.
Arovast agrees, at our option during the
warranty period, to repair any defect in
material or workmanship or furnish an equal
product in exchange without charge, subject
to verification of the defect or malfunction
and proof of the date of purchase.
This warranty gives you specific legal rights
and you may also have other rights which
vary from state to state. Some states do not
allow the exclusion or limitation of incidental
or consequential damages, so the above
limitation or exclusion may not apply to you.
There is no other express warranty. This
warranty does not apply:
If you discover that your product is
• If the product has been modified
from its original condition;
defective within the specified warranty
period, please contact Customer Support
of your product before contacting us. Once
our Customer Support Team has approved
your request, please return the product
with a copy of the invoice and order ID.
• If the product has not been used
in accordance with directions and
instructions in the user manual;
• To damages or defects caused by
accident, abuse, misuse or improper
or inadequate maintenance;
• To damages or defects caused by
service or repair of the product
performed by an unauthorized
service provider or by anyone other
than Arovast;
Extend Your Warranty by 1 Year
Register your product within 14 days of
purchase at www.levoit.com/warranty
to extend your 1-year warranty by an
additional year.
• To damages or defects occurring
during commercial use, rental use,
or any use for which the product is
not intended;
This warranty is made by:
• To damages or defects exceeding
Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
the cost of the product.
19
CUSTOMER SUPPORT
If you have any questions or concerns about
your new product, please contact our helpful
Customer Support Team.
Distributed by Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
Email: [email protected]
Toll-Free: (888) 726-8520
Support Hours
Mon–Fri, 9:00 am–5:00 pm PST/PDT
*Please have your order invoice and order ID
ready before contacting Customer Support.
The energy efficiency of this ENERGY STAR certified model
is measured based on a ratio between the model’s CADR for
Smoke and the electrical energy it consumes, or CADR/Watt.
ATTRIBUTIONS
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google, Android, and Google Play are trademarks of Google LLC.
App Store® is a trademark of Apple Inc.
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
iOS is a registered trademark of Cisco Systems, Inc. and/or its affiliates in the United States and
certain other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Arovast Corporation is under license. Other trademarks and trade names
are those of their respective owners.
20
NOTES
NOTES
/LEVOITLIFESTYLE
/LEVOIT
/LEVOIT
/LEVOIT
LEVOIT.COM
OW050721CW-M1.1_0321Core400S
|