Lenovo Z410/Z510/
Z510 Touch
User Guide
Read the safety notices and important tips in the
included manuals before using your computer.
Contents
Top view......................................................................................................................................................... 1
Left-side view ................................................................................................................................................ 6
Right-side view.............................................................................................................................................. 9
Front view .................................................................................................................................................... 10
Bottom view................................................................................................................................................. 11
Configuring the operating system for the first time .............................................................................. 12
Operating system interfaces ...................................................................................................................... 12
The charms................................................................................................................................................... 13
Putting the computer to sleep or shutting it down................................................................................ 15
Touch screen operation (on select models) ............................................................................................. 17
Connecting to wireless LAN ..................................................................................................................... 21
Help and support ........................................................................................................................................ 22
Frequently asked questions ....................................................................................................................... 24
Troubleshooting .......................................................................................................................................... 26
Trademarks....................................................................................................................................... 30
i
Chapter 1. Getting to know your computer
Z510/Z510 Touch
2
1
3
4
5
6
Note: The dashed areas indicate parts that are not visible externally.
Attention:
ꢀ
•
When closing the display panel, be careful not to leave pens or any other objects in between the display
panel and the keyboard. Otherwise, the display panel may be damaged.
2
Chapter 1. Getting to know your computer
Use the camera for video communication or taking photos.
Integrated camera
Built-in microphone
a
b
Captures sound which can be used for video conferencing, voice narration,
or audio recording.
Connect to the wireless LAN adapter to send and receive wireless radio.
Wireless LAN
antennas
c
d
Computer display
The computer display with LED backlight provides brilliant visual output.
Note: Select models may have a multi-touch screen. Please refer to the actual product. For details, see
Power button
e
f
Press this button to turn on the computer.
Touch pad
The touch pad functions as a conventional mouse.
Touch pad: To move the pointer on the screen, slide your fingertip over the
pad in the direction in which you want the pointer to move.
Touch pad buttons: The functions of the left/right side correspond to that
of the left/right mouse button on a conventional mouse.
Note: You can enable/disable the touch pad by pressing F6 (
).
3
Chapter 1. Getting to know your computer
Hotkeys
The hotkeys are located on the function key row on the keyboard. You can access certain system
settings quickly by pressing the appropriate hotkey.
Z410
Z510/Z510 Touch
Enables/disables Airplane
mode.
Mutes/unmutes the sound.
Decreases the volume level.
Increases the volume level.
:
:
:
:
:
:
Displays all currently active
apps.
Turns on/off the backlight of
the LCD screen.
Toggles the display between the
computer and an external
device.
Closes the currently active
window.
:
:
Refreshes the desktop or the
currently active window.
Decreases display brightness.
:
:
:
:
Enables/disables the touch
pad.
Increases display brightness.
4
Chapter 1. Getting to know your computer
Function key combinations
Through the use of the function keys, you can change operational features instantly. To use this
function, press and hold Fn a; then press one of the function keys b.
Z410
Z510/Z510 Touch
The following describes the features of each function key.
Fn + PgUp:
Fn + PgDn:
Fn + Home:
Fn + End:
Enables/disables the scroll lock.
Activates the system request.
Activates the pause function.
Activates the break function.
Fn + Space (on select models): Enables/disables the keyboard backlight.
5
Chapter 1. Getting to know your computer
Left-side view ------------------------------------------------------------------------------------------------------------
1
2
3
4
5
6
7
a
b
Connect the AC power adapter here.
AC power adapter
jack
When the computer is off, press this button to start the Lenovo Recovery
System or the BIOS setup utility, or to enter the boot menu.
Novo button
c
Dissipate internal heat.
Note: Make sure that none of the fan louvers are blocked or else overheating of the computer may occur.
Fan louvers
d
e
f
g
Connects to external display devices.
VGA port
RJ-45 port
HDMI port
USB ports
This port connects the computer to an Ethernet network.
Connects to devices with HDMI inputs, such as a TV or an external display.
Connect to USB devices.
6
Chapter 1. Getting to know your computer
Connecting to wired LAN
Wired connections are a reliable and safe way to connect the computer to the Internet.
•
Cable Internet services use a cable modem connected to the
residential cable TV line.
Cable
DSL
•
DSL is a family of related technologies that bring high-speed
network access to homes and small businesses over ordinary
telephone lines.
Hardware connection:
Cable
DSL
TV cable
Telephone line
Splitter *
Splitter *
*
*
Cable modem *
DSL modem *
*
*
* Not supplied.
Note: The above diagrams are for reference only. Actual connection method may vary.
Software configuration
Consult your Internet Service Provider (ISP) for details on how to configure your computer.
7
Chapter 1. Getting to know your computer
Connecting USB devices
Your computer comes with two USB ports compatible with USB devices.
The first time you plug a USB device into a particular USB port on your computer, Windows
automatically installs a driver for that device. After the driver has been installed, you can
disconnect and reconnect the device without performing any additional steps.
Note: Typically, Windows detects a new device after connecting it, and then installs the driver
automatically. However, some devices may require you to install the driver before connecting.
Check the documentation provided by the device’s manufacturer before connecting the device.
Before disconnecting a USB storage device, make sure your computer has finished transferring
data by that device. Click the Safely Remove Hardware icon in the notification area of Windows
to remove the device before disconnecting.
Note: If your USB device uses a power cord, connect the device to a power source before connecting it.
Otherwise, the device may not be recognized.
Using memory cards (not supplied)
Your computer supports the following types of memory card:
• Secure Digital (SD) card
• MultiMediaCard (MMC)
Notes:
•
•
Insert only one card in the slot at a time.
This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Inserting a memory card
1
2
Push the dummy card in until you hear a click.
Gently pull the dummy card out of the memory card slot.
Note: The dummy card is used for preventing dust and small particles from entering the inside of your
computer when the memory card slot is not in use. Retain the dummy card for future use.
3
Slide the memory card in until it clicks into place.
Removing a memory card
1
2
Push the memory card in until you hear a click.
Gently pull the memory card out of the memory card slot.
Note: Before removing the memory card, disable it by using the Windows Safely Remove Hardware and
Eject Media utility to avoid data corruption.
8
Chapter 1. Getting to know your computer
Right-side view ---------------------------------------------------------------------------------------------------------
1
2
3
4
5
a
Connects to headsets.
Combo audio jack
Notes:
•
•
The combo audio jack does not support conventional microphones.
The recording function may not be supported if third-party headphones or headsets are connected,
due to different industry standards.
b
c
Insert memory cards (not supplied) here.
Memory card slot
Connects to USB devices.
USB port
d
e
Reads/burns optical discs.
Optical drive
Attach a security lock (not supplied) here.
Kensington slot
Attaching a security lock (not supplied)
You can attach a security lock to your computer to help prevent it from being removed without
your permission. For details on installing the security lock, please refer to the instructions
shipped with the security lock that you have purchased.
Notes:
•
•
Before purchasing any security product, verify that it is compatible with this type of security keyhole.
You are responsible for evaluating, selecting, and implementing the locking devices and security
features. Lenovo offers no comment judgment or warranty regarding the function, quality or
performance of locking devices and security features.
9
Chapter 1. Getting to know your computer
Front view ---------------------------------------------------------------------------------------------------------------------
1
System status indicators
a
Indicator
status
Charge
Status
Symbol Indicator
Meaning
On (solid
white)
---
The computer is powered on.
Power
Blinking
---
---
The computer is in sleep mode.
Off
The computer is powered off.
The battery has more than 80%
charge.
Charging
Discharging
Discharging
On (solid
white)
The battery has more than 20%
charge.
On (solid
amber)
The battery has between 5% and
20% charge.
The battery has between 20% and
80% charge. When the battery
reaches 80% charge, the light will
stop blinking. However, charging
will continue until the battery is
fully charged.
Blinking
slowly
(white)
Charging
Battery
The battery has less than 20%
charge. When battery charge
reaches 20%, the blinking color will
change to white.
Blinking
slowly
(amber)
Charging
Blinking
quickly
(amber)
Charging/
Discharging
The battery has less than 5% charge.
10
Chapter 2. Starting to use Windows 8
Configuring the operating system for the first time ---------------
You may need to configure the operating system when it is first used. The configuration process
may include the procedures below:
• Accepting the end user license agreement
• Configuring the internet connection
• Registering the operating system
• Creating a user account
Operating system interfaces ------------------------------------------------------------------------
Windows 8 comes with two main User Interface: the Start screen and the desktop.
To switch from the Start screen to the desktop, do one of the following:
• Select the desktop tile on the Start screen.
• Press Windows key + D.
To switch from the desktop to the Start screen, do one of the following:
• Select Start
from the charms.
• Move the pointer to the lower-left corner and then select the Start screen thumbnail when it is
displayed.
Start screen
Desktop
12
Chapter 2. Starting to use Windows 8
The charms -------------------------------------------------------------------------------------------------------------------
The five charms provide new and faster ways to perform many basic tasks, and are always
available regardless of which app you are currently in.
To display the charms, do one of the following:
• Move the pointer to the upper-right or lower-right corner until the charms bar is displayed.
• Press Windows key + C.
• Use one finger to swipe in from the right edge of the screen until the charms bar is displayed.
(on select models)
Search charm
The Search charm is a powerful new way to find whatever you are looking for, including apps,
settings and files.
13
Chapter 2. Starting to use Windows 8
Share charm
The Share charm lets you send links, photos, and more to your friends and social networks
without leaving the app you are in.
Start charm
The Start charm is a fast way to go to the Start screen.
Devices charm
The Devices charm allows you to connect or send files to any external devices, such as digital
cameras, TVs, or printers.
Settings charm
The Settings charm lets you perform basic tasks, such as setting the volume or shutting down
the computer. Also, you can get to the Control Panel through the Settings charm when using the
desktop screen.
14
Chapter 2. Starting to use Windows 8
Putting the computer to sleep or shutting it down -------------------
When you have finished working with your computer, you can put it to sleep or shut it down.
Putting your computer to sleep
If you will be away from your computer for a short time, put the computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the
startup process.
To put the computer to sleep, do one of the following:
• Close the display panel.
• Press the Power button.
• Open the charms and then select Settings
Power
Sleep.
Note: Wait until the power indicator light starts blinking (indicating that the computer is in sleep mode)
before you move your computer. Moving your computer while the hard disk is spinning can
damage the hard disk, causing loss of data.
To wake the computer, do one of the following:
• Press any key on the keyboard. (Notebook mode only)
• Press the Power button.
15
Chapter 2. Starting to use Windows 8
Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down your computer:
1
Open the charms, and then select Settings
.
1
2
Select Power
Shut down.
2
16
Chapter 2. Starting to use Windows 8
Touch screen operation (on select models) ------------------------------------
The display panel can accept inputs like a tablet, using the multi-touch screen, or like a
traditional notebook computer, using the keyboard and touch pad.
Multi-touch gestures
You can touch the screen with one or more fingertips to perform a variety of tasks.
Frequently used gestures
Tasks performed
Tap
Tap once on an item.
Performs an action, such as starting an
app, opening a link, or performing a
command. Similar to left-clicking with a
mouse.
Press and hold
Press your finger down and leave it there
for a moment.
Allows you to see detailed information
before selecting an action. Can also open a
menu with more options. Similar to right-
clicking with a mouse.
17
Chapter 2. Starting to use Windows 8
(continued)
Frequently used gestures
Tasks performed
Zoom
Move two fingers together or apart while
touching the screen.
Zooms in and out on visual apps, such as
pictures and maps. Can also jump to the
beginning or end of a list.
Rotate
Place two or more fingers on an item and
then turn your hand.
Turns an object. (Note: Not all items can
be rotated, depending upon the app.)
Slide
Drag your finger across the screen.
Pans or scrolls through lists and pages.
Can also move an object or be used to
draw or write, depending upon the app.
Similar to pressing and holding to pan
and to scrolling with a mouse.
18
Chapter 2. Starting to use Windows 8
(continued)
Frequently used gestures
Tasks performed
Swipe
Start from any edge of the screen, then
swipe inwards toward the center.
Swiping down from the top edge or up
from the bottom edge displays a task bar
on the bottom of the screen with app
commands, including save, edit, and
delete.
If you have an app currently open, you
can also:
• Swipe from the top edge to halfway
down the screen without lifting your
finger to dock that app on the left or
right side of the screen. This allows you
to keep two apps open simultaneously
in a split-screen format.
• Swipe from the top edge straight down
to the bottom edge of the screen
continuously without lifting your
finger to close the currently open app.
19
Chapter 2. Starting to use Windows 8
(continued)
Frequently used gestures
Tasks performed
Swiping in from the left edge can:
• Bring in and open an app currently
running in the background.
If there is more than one currently open
app, you can:
• Swipe in from the left to bring in an
app and, without lifting your finger,
push that app quickly back off the left
edge of the screen. This displays a list
of the apps currently running in the
background.
Swiping in from the right edge of the
screen displays the charms.
20
Chapter 2. Starting to use Windows 8
Connecting to wireless LAN --------------------------------------------------------------------------
Enabling wireless connection
To confirm that Airplane mode is disabled, go to the desktop and check the notification area.
If you see the
icon displayed on the lower right, then Airplane mode is on. Otherwise,
wireless function is enabled.
Note: Airplane mode should be disabled by default.
If Airplane mode is on, do one of the following to enable the wireless function:
• Press F7 (
) to disable Airplane mode.
• Open the charms, select Settings
to open the Network configuration page, and
then toggle Airplane mode switch to Off.
Connecting to a wireless LAN
After wireless has been enabled, the computer will automatically scan for available wireless
networks and display them in the wireless LAN network list. To connect to a wireless network,
click the network name in the list, and then click Connect.
Note: Some networks require a network security key or passphrase for connection. To connect to one of
those networks, ask the network administrator or the Internet Service Provider (ISP) for the
security key or passphrase.
21
Chapter 2. Starting to use Windows 8
---------------------------------------------------------------------------------------------------------
Help and support
If you have any problems using the operating system, see the Windows Help and Support file.
To open the Windows Help and Support file, do one of the following:
• Select the Settings charm, then select Help.
• Press Windows key + Fn + F1 .
You can read the Windows Help and Support file on your computer. You can also get online help
and support by clicking the link listed under More to explore.
22
Chapter 3. Lenovo OneKey Recovery System
The Lenovo OneKey Recovery System is software designed to back up and restore your
computer. You can use it to restore the system partition to its original status in case of a system
failure. You can also create user backups for easy restoration as required.
Note: To utilize the features of the OneKey Recovery System, your hard disk already includes a hidden
partition by default to store the system image file and the OneKey Recovery System program files.
This default partition is hidden for security reasons, which explains why the available disk space is
less than the stated capacity.
Backing up the system partition
You can back up the system partition to an image file. To back up the system partition:
1
Press the Novo button, then click OneKey Recovery to start the Lenovo OneKey Recovery
System.
2
3
Click System Backup.
Select a back-up location and click Next to start the backup.
Notes:
•
•
•
You can choose a back-up location on the local hard disk drive or an external storage device.
The back-up process may take a while.
The back-up process is only available when Windows can be started normally.
Restoring
You can choose to restore the system partition to its original status or to a previously created
back-up point. To restore the system partition:
1
Press the Novo button, then click OneKey Recovery to start the Lenovo OneKey Recovery
System.
2
3
Click System Recovery. The computer will restart to the recovery environment.
Follow the on-screen instructions to restore the system partition to its original status or to a
previously created back-up point.
Notes:
•
•
•
The recovery process is irreversible. Make sure to back up any data you wish to save on the system
partition before starting the recovery process.
The recovery process may take a while. So be sure to connect the AC power adapter to your computer
during the recovery process.
The above instructions should be followed when Windows can be started normally.
If Windows cannot be started, then follow the steps below to start the Lenovo OneKey Recovery
System:
1
Shut down the computer.
2
Press the Novo button. From the Novo button menu, select the Lenovo OneKey Recovery
System and press Enter.
23
Chapter 4. Troubleshooting
Frequently asked questions -----------------------------------------------------------------------------------
This section lists frequently asked questions by category.
Finding information
What safety precautions should I follow when using my computer?
The Lenovo Safety and General Information Guide which came with your computer contains
safety precautions for using your computer. Read and follow all the precautions when using
your computer.
Where can I find the hardware specifications for my computer?
You can find hardware specification for your computer on the printed flyers which came with
your computer.
Where can I find warranty information?
For the warranty applicable to your computer, including the warranty period and type of
warranty service, see the Lenovo limited warranty flyer that came with your computer.
Drivers and preinstalled software
Where are the installation discs for Lenovo preinstalled software (desktop software)?
Your computer did not come with installation discs for Lenovo preinstalled software. If you
need to reinstall any preinstalled software, you can find the installation program on the D
partition of your hard disk. If you cannot find the installation program there, you can also
download it from the Lenovo consumer support website.
Where can I find drivers for the various hardware devices of my computer?
If your computer is preinstalled with a Windows operating system, Lenovo provides drivers
for all the hardware devices that you need on the D partition of your hard disk. You can also
download the latest device drivers from the Lenovo consumer support website.
Lenovo OneKey Recovery System
Where are the recovery discs?
Your computer did not come with recovery discs. Use the Lenovo OneKey Recovery System if
you need to restore the system to its factory status.
What can I do if the back-up process fails?
If you can start the backup but it fails during the back-up process, try the following steps:
1
2
Close all open programs, and then restart the back-up process.
Check to see if the destination media is damaged. If it is, replace the damaged media.
Otherwise, select another destination path and try again.
24
Chapter 4. Troubleshooting
When do I need to restore the system to its factory status?
Use this feature when the operating system fails to start up. If there is critical data on the
system partition, back it up before starting recovery.
BIOS setup utility
What is the BIOS setup utility?
The BIOS setup utility is ROM-based software. It displays basic computer information and
provides options for setting boot devices, security, hardware mode, and other preferences.
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1
2
Shut down the computer.
Press the Novo button and then select BIOS Setup.
How can I change the boot mode?
There are two boot modes: UEFI and Legacy Support. To change the boot mode, start the
BIOS setup utility and set boot mode to UEFI or Legacy Support on the boot menu.
When do I need to change the boot mode?
The default boot mode for your computer is UEFI mode. If you need to install a legacy
operating system, such as Windows, Linux or Dos, etc (that is, any operating system before
Windows 8) on your computer, you must change the boot mode to Legacy support. The
legacy operating system, such as Windows, Linux or Dos, etc cannot be installed if you don't
change the boot mode.
Getting help
How can I contact the customer support center?
See “Chapter 3. Getting help and service” in the Lenovo Safety and General Information Guide.
25
Chapter 4. Troubleshooting
Troubleshooting------------------------------------------------------------------------------------------------------------
Display problems
When I turn on the computer,
nothing appears on the screen.
•
If the screen is blank, make sure that:
- The AC power adapter is connected to the computer, and
the power cord is plugged into a working electrical outlet.
- The computer power is on. (Press the Power button again
for confirmation.)
•
•
If these items are properly set, and the screen remains blank,
have the computer serviced.
When I turn on the computer,
only a white cursor appears on
a blank screen.
Restore backed-up files to your Windows environment or
the entire contents of your hard disk to its original factory
contents using the Lenovo OneKey Recovery System. If you
still see only the cursor on the screen, have the computer
serviced.
The screen goes blank while
the computer is on.
•
Your screen saver or power management may be enabled.
Do one of the following to resume from sleep mode.
- Press any key on the keyboard. (Notebook mode only)
- Press the Power button.
- Press F9 (
) to confirm whether the backlight of the
LCD screen has been turned off.
Password problems
I forgot my password.
•
•
If you forget your user password, ask the system
administrator to clear your user password.
If you forget your hard disk drive password, a Lenovo
authorized servicer cannot reset your password or recover
data from the hard disk. You must take your computer to a
Lenovo authorized servicer or a marketing representative to
have the hard disk drive replaced. Proof of purchase is
required, and a fee will be charged for parts and service.
If you forget your administrator password, a Lenovo
authorized servicer cannot reset your password. You must
take your computer to a Lenovo authorized servicer or a
marketing representative to have the system board
replaced. Proof of purchase is required, and a fee will be
charged for parts and service.
•
26
Chapter 4. Troubleshooting
Sleep problems
The critical low-battery error
message appears, and the
computer immediately turns off.
•
•
The battery power is getting low. Connect the AC power
adapter to the computer.
The computer enters sleep
mode immediately after
Power-on.
Make sure that:
- The battery is charged.
- The operating temperature is within the acceptable range.
See “Chapter 2. Use and care Information” in the Lenovo
Safety and General Information Guide.
Note: If the battery is charged and the temperature is within range, have the computer serviced.
The computer does not return
from sleep mode and the
computer does not work.
•
•
If your computer is in sleep mode, connect the AC power
adapter to the computer, then press the Power button.
If your computer is powered-off, connect the AC power
adapter to the computer, then press the Power button to
resume operation.
Note: If the system still does not return from sleep mode, your system has stopped responding, and you cannot
turn off the computer; reset the computer. Unsaved data may be lost. To reset the computer, press and
hold the Power button for five seconds or more. If the computer still does not reset, remove the AC
power adapter.
Display panel problems
The screen is blank.
•
Do the following:
- If you are using the AC power adapter or the battery, and
the battery status indicator is on, press F12 (
) to
make the screen brighter.
- If the power indicator is blinking, press the Power button
to resume from sleep mode.
- If the problem persists, follow the solution in the next
problem “The screen is unreadable or distorted.”
- Press F9 (
) to confirm whether the backlight of the
LCD screen has been turned off.
The screen is unreadable or
distorted.
•
•
Make sure that:
- The display device driver is installed correctly.
- The screen resolution and color quality are correctly set.
- The monitor type is correct.
Incorrect characters appear on
the screen.
Is the operating system or programs installed correctly?
If they are installed and configured correctly, have the
computer serviced.
27
Chapter 4. Troubleshooting
Sound problems
No sound can be heard from
the speaker even when the
volume is turned up.
•
•
Make sure that:
- The Mute function is off.
- The combo audio jack is not being used.
- Speakers are selected as the playback device.
Battery problems
Your computer shuts down
before the battery status
indicator shows empty.
-or-
Recharge the battery.
Your computer operates after
the battery status indicator
shows empty.
The computer does not operate
with a fully charged battery.
•
•
The surge protector in the battery might be active. Turn off
the computer for one minute to reset the protector; then turn
on the computer again.
A startup problem
The Microsoft® Windows
operating system does not
start.
Use the OneKey Recovery Syetem to restore the system
partition to its original status or a previously created back-
up point. For details about the OneKey Recovery System,
A hard disk drive problem
The hard disk drive does not
work.
•
Make sure that the hard disk drive is included in the Boot
menu in the BIOS setup utility correctly.
A backup problem
Backup cannot be made.
•
•
You are not currently using a Windows operating system.
There is not enough space to store the backed-up data. You
will need to free more space on the destination device.
Other problems
Your computer does not
respond.
•
•
To turn off your computer, press and hold the Power button
for five seconds or more. If the computer still does not
respond, remove the AC power adapter.
Your computer might lock when it enters sleep mode
during a communication operation. Disable the sleep timer
when you are working on the network.
28
Chapter 4. Troubleshooting
The computer does not start
from a device you want.
•
•
See the Boot menu of the BIOS setup utility. Make sure that
the BIOS setup utility is set so that the computer starts from
the device you want.
Also make sure that the device from which the computer
starts is enabled. Make sure that the device is included in
the Boot menu in the BIOS setup utility correctly.
While turned off, press the Novo button to select the device
you want the computer to start from.
•
•
The connected external device
does not work.
Do not connect or disconnect any external device cables
other than USB while the computer power is on. Otherwise,
you might damage your computer.
•
When using high power consumption external devices such
as an external USB optical disk drive, use an external device
power adapter. Otherwise, the device may not be
recognized, or the system may shut down as a result.
29
en-US
Rev. AA00
|