Lenovo YOGA 900
YOGA 900-13ISK
User Guide
Read the safety notices and important tips in the
included manuals before using your computer.
Contents
Chapter 1. Getting to know your computer..................................................................................... 1
Left-side view................................................................................................................................................ 8
Chapter 2. Starting to use Windows 10......................................................................................... 14
Connecting to a wireless network............................................................................................................ 19
Chapter 3. Lenovo OneKey Recovery System.............................................................................. 23
Chapter 4. Troubleshooting............................................................................................................ 24
Troubleshooting.......................................................................................................................................... 26
Trademarks...................................................................................................................................... 29
i
Chapter 1. Getting to know your computer
Top view --------------------------------------------------------------------------------------------------------------------------
2
1
2
3
4
5
5
6
7
6
Note: The dashed areas indicate parts that are not visible externally.
Attention:
•
When closing the display panel, be careful not to leave pens or any other objects in between the display
panel and the keyboard. Otherwise, the display panel may be damaged.
1
Chapter 1. Getting to know your computer
Use the camera for video communication or taking photos.
Integrated camera
Built-in microphone
a
b
Captures sound which can be used for video conferencing, voice
narration, or audio recording.
The LCD display with LED backlight provides brilliant visual output.
Multi-touch function is available on this display.
Multi-touch screen
c
Opens/closes the start menu.
Dissipate internal heat.
Windows button
Ventilation slots
d
e
Note: Make sure that the ventilation slots are not blocked or else the computer may overheat.
Connect to a wireless LAN adapter to send and receive wireless radio signals.
Wireless LAN antennas
Touchpad
f
g
The touchpad functions as a conventional mouse.
One piece multi-touch ClickPad: To move the pointer on the screen,
slide your fingertip over the pad in the direction in which you want the
pointer to move.
Left-click area: Clicking in this area corresponds to the functions of
clicking the left button on a conventional mouse.
Right-click area: Clicking in this area corresponds to the functions of
clicking the right button on a conventional mouse.
Note: You can enable/disable the touchpad by pressing F6 (
).
2
Chapter 1. Getting to know your computer
Using the keyboard
Function key combinations
Through the use of the function keys, you can change operational features instantly. To use this
function, press and hold Fn
a
; then press one of the function keys
b.
2
2
1
2
The following describes the features of each function key.
Fn + Esc:
Enables/disables the paper display feature.
Activates the pause function.
Fn + Home:
Fn + End:
Fn + PgUp:
Fn + PgDn:
Activates the break function.
Enables/disables the scroll lock.
Activates the insert function.
Fn + Space
(on select models):
Adjusts the keyboard backlight (off bright dim off).
3
Chapter 1. Getting to know your computer
Hotkeys
You can access certain system settings quickly by pressing the appropriate hotkeys.
:
:
Mutes/unmutes the sound.
Decreases the volume level.
:
:
Enables/disables Airplane mode.
Displays all currently active apps.
Turns on/off the backlight of the
LCD screen.
:
:
Increases the volume level.
:
:
Closes the currently active
window.
Toggles the display between the
computer and an external device.
Refreshes the desktop or the
currently active window.
:
:
:
:
Decreases the display brightness.
Increases the display brightness.
Enables/disables the touchpad.
Setting hotkey mode
By default, the hotkey functions are accessible by pressing the appropriate hotkey. However,
you can disable the hotkey mode in the BIOS setup utility.
To disable the hotkey mode:
1
2
3
Shut down the computer.
Press the Novo button and then select BIOS Setup.
In the BIOS setup utility, open the Configuration menu, and change the setting of HotKey
Mode from Enabled to Disabled.
4
Open the Exit menu, and select Exit Saving Changes.
Note: When hotkey mode is disabled, press the Fn key and the appropriate hotkey to access the
corresponding hotkey function.
4
Chapter 1. Getting to know your computer
Positioning the display panel
The display panel can be opened to any angle up to 360 degrees.
Notebook Mode
Suitable for tasks that require a keyboard and mouse (such as creating documents, writing
e-mails, and so on).
5
Chapter 1. Getting to know your computer
Stand Mode (Theater Mode)
Suitable for tasks that require little or no touch (such as viewing photos or playing videos).
Tablet Mode
Suitable for tasks that require touching the screen often (such as surfing the Web, playing games,
and so on).
6
Chapter 1. Getting to know your computer
Tent Mode (Presentation Mode)
Suitable for tasks that require limited interaction with the touch screen (such as displaying
graphs or PowerPoint presentations).
Attention:
Do not open the display with too much force, otherwise the panel or hinges may be damaged.
•
Note: The keyboard and touchpad are automatically locked when the screen is opened beyond 190 degrees
(approximately).
7
Chapter 1. Getting to know your computer
Left-side view--------------------------------------------------------------------------------------------------------------
1
2
3
4
Connects to the AC power adapter.
AC power adapter jack
a
b
c
Note: The AC power adapter jack is compatible with standard USB 2.0 devices.
Connects to USB devices.
USB 3.0 port
Type-C port supports:
Type-C port
•
•
•
USB 3.0
Native display port 1.2 video output
VGA/HDMI output using Type-C VGA/HDMI adapter (sold separately)
Accepts memory cards (not supplied).
Memory card slot
d
8
Chapter 1. Getting to know your computer
Connecting USB device
Your computer comes with two USB ports compatible with USB devices.
The first time you plug a USB device into a particular USB port on your computer, Windows
automatically installs a driver for that device. After the driver has been installed, you can
disconnect and reconnect the device without performing any additional steps.
Note: Typically, Windows detects a new device after it has been connected, and then installs the driver
automatically. However, some devices may require you to install the driver before connecting. Check
the documentation provided by the device’s manufacturer before connecting the device.
Before disconnecting a USB storage device, make sure your computer has finished transferring
data to that device. Click the Safely Remove Hardware and Eject Media icon in the Windows
notification area to remove the device before disconnecting.
Note: If your USB device uses a power cord, connect the device to a power source before connecting it.
Otherwise, the device may not be recognized.
9
Chapter 1. Getting to know your computer
Using memory cards (not supplied)
Your computer supports the following types of memory cards:
• Secure Digital (SD) card
• Secure Digital High Capacity (SDHC) card
• Secure Digital eXtended Capacity (SDXC) card
• MultiMediaCard (MMC)
Notes:
•
•
Insert only one card in the slot at a time.
This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Note: Before removing the memory card, disable it by using the Windows safely remove hardware and eject
media utility to avoid data corruption.
10
Chapter 1. Getting to know your computer
Right-side view----------------------------------------------------------------------------------------------------------
1
2
3
4
5
6
Battery status indicator
Power button
a
b
Press this button to turn on the computer.
Indicator
Indicator status
Meaning
On (solid white)
The battery has more than 20%.
The battery has between 5% and 20%.
The battery has less than 5%.
On (solid amber)
Blinking quickly (amber)
The battery is being charged. When the battery
charge reaches 20%, the blinking color will
change to white.
Blinking slowly (amber)
Blinking slowly (white)
Battery status indicator
The battery has between 20% and 80% charge
and is still charging. When the battery reaches
80% charge the light will stop blinking, but
charging will continue until the battery is fully
charged.
On (solid white)
Blinking
The computer is powered on.
The computer is in sleep mode.
The computer is powered off.
Power status indicator
Off
When the computer is off, press this button to start the Lenovo OneKey
Recovery System or the BIOS setup utility, or to enter the boot menu.
Novo button
c
d
Keeps the screen locked in portrait or landscape orientation. Locking the
screen rotation will disable the gravity sensing function, thereby
preventing the screen from changing its orientation automatically
depending upon the angle at which it is held.
Rotation lock button
Note: The screen rotation lock button will be disabled in notebook mode.
Connects to headsets.
Combo audio jack
Notes:
•
•
e
f
The combo audio jack does not support conventional microphones.
The combo audio jack supports headphones and CTIA & OMTP headsets.
Connects to USB devices.
USB 3.0 port
11
Chapter 1. Getting to know your computer
Screen orientation
You can rotate the display panel to your preferred orientation.
• The orientation of the display automatically changes (alternating between portrait and
landscape modes) depending on how you hold it.
Landscape
Portrait
• To prevent automatic orientation, press the rotation lock button. It is located on the right edge
of the computer (See illustration below).
Note: The screen rotation lock button will be disabled in notebook mode.
12
Chapter 2. Starting to use Windows 10
Configuring the operating system for the first time-----------------
You may need to configure the operating system when it is first used.
The configuration process may include the procedures below:
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account
Operating system interfaces -------------------------------------------------------------------------
Windows 10 comes with a powerful and useful start menu.
To open the start menu, do one of the following:
• Press the Windows button
• Press the Windows key
.
on the keyboard.
• Select Start
on the lower-left corner of the desktop.
1
2
3
4
5
6
7
Get Started app
Start button
a
b
c
d
e
f
g
Settings button
Power button
All apps button
Search box
Task view button
14
Chapter 2. Starting to use Windows 10
Settings
Settings lets you perform basic tasks. You can also search for more settings with the settings
search box in the upper-right corner.
To open the settings, do the following:
• Open the start menu, and then select Settings
.
Personalize the start menu
You can personalize the start menu with your favorite apps.
To personalize the start menu, do the following:
1
2
Open the start menu, and then select All apps
to display the apps list.
Right click the app you want to add to the start menu, and then select Pin to Start.
Note: You can also drag apps from the Most used or All apps columns to add them to the start menu.
15
Chapter 2. Starting to use Windows 10
Putting the computer to sleep or shutting it down--------------------
When you have finished working with your computer, you can put it to sleep or shut it down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the
startup process.
To put the computer to sleep, do one of the following:
• Close the display lid.
• Press the Power button.
• Open the start menu, and then select Power
Sleep.
Note: Wait until the power indicator light starts blinking (indicating that the computer is in sleep mode)
before you move your computer. Moving your computer while the hard disk is spinning can damage
the hard disk, causing loss of data.
To wake the computer, do one of the following:
• Press any key on the keyboard. (Notebook mode only)
• Press the Power button.
• Press the Windows button
.
16
Chapter 2. Starting to use Windows 10
Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down the computer, do one of the following:
• Open the start menu, and then select Power
Shut down.
• Press and hold or right-click the Start button in the lower-left corner and select Shut down or
sign out Shut down.
17
Chapter 2. Starting to use Windows 10
Task and desktop management-------------------------------------------------------------------
Task view
To open the task view, do one of the following:
• Select the Task view button
on the task bar.
• Press the Windows key
+ Tab.
• Swiping in from the left edge of the screen.
Virtual desktop management
Windows 10 supports the ability to create, manage and switch between virtual desktops.
To create a new virtual desktop, do one of the following:
• Open the task view, and then select New desktop.
• Press the Windows key
+ Ctrl + D.
To switch between different desktops, do one of the following:
• Open the task view and select the desktop you want active.
• Press the Windows key
+ Ctrl +
/
to scroll through the desktops you’ve created.
18
Chapter 2. Starting to use Windows 10
Connecting to a wireless network ------------------------------------------------------------
Enabling wireless connection
To enable wireless functions, do the following:
1
2
Press F7 (
) to disable airplane mode.
Click
on the lower-right corner of the task bar to open the network configuration page.
Connecting to a wireless network
After wireless has been enabled, the computer will automatically scan for available wireless
networks and display them in the wireless network list. To connect to a wireless network, click
the network name in the list, and then click Connect.
Note: Some networks require a network security key or passphrase for connection. To connect to one of
those networks, ask the network administrator or the Internet service provider (ISP) for the security
key or passphrase.
Get Started app ---------------------------------------------------------------------------------------------------------
Windows 10 also provides the Get Started app to explain the new features of Windows 10. You
can find it on the start menu.
To open the Get Started app, do one of the following:
• Open the start menu and select Get Started
.
• Press Fn + F1 (depending on your keyboard layout).
19
Chapter 2. Starting to use Windows 10
Touch screen operation-------------------------------------------------------------------------------------
The display panel can accept inputs like a tablet, using the multi-touch screen, or like a
traditional notebook computer, using the keyboard and touchpad.
Multi-touch gestures
You can touch the screen with one or more fingertips to perform a variety of tasks.
Frequently used gestures
Tasks performed
Tap
Tap once on an item.
Performs an action, such as starting an app,
opening a link, or performing a command.
Similar to left-clicking with a mouse.
Press and hold
Press your finger down and leave it there for
a moment.
Enables you to see detailed information
before selecting an action. Can also open a
menu with more options. Similar to right-
clicking with a mouse.
20
Chapter 2. Starting to use Windows 10
(continued)
Frequently used gestures
Tasks performed
Zoom
Move two fingers together or apart while
touching the screen.
Zooms in and out on visual apps, such as
pictures and maps. Can also jump to the
beginning or end of a list.
Rotate
Place two or more fingers on an item and then
turn your hand.
Rotates an object (Note: Not all items can be
rotated, depending upon the app.).
Slide
Drag your finger across the screen.
Pans or scrolls through lists and pages.
Can also move an object or be used to draw
or write, depending upon the app. Similar
to pressing and holding to pan and to
scrolling with a mouse.
21
Chapter 2. Starting to use Windows 10
(continued)
Frequently used gestures
Tasks performed
Swipe
Start from left/right edge of the screen, then
swipe inwards toward the center.
Swiping in from the left edge of the screen
can open the task view.
Swiping in from the right edge of the screen
displays the action center.
22
Chapter 3. Lenovo OneKey Recovery System
The Lenovo OneKey Recovery System is software designed to back up and restore your
computer. You can use it to restore the system partition to its original status in case of a system
failure. You can also create user backups for easy restoration as required.
Notes:
•
If your computer is preinstalled with a GNU/Linux operating system, OneKey Recovery System is
not available.
•
To utilize the features of the OneKey Recovery System, your hard disk already includes a hidden
partition by default to store the system image file and the OneKey Recovery System program files. This
default partition is hidden for security reasons, which explains why the available disk space is less than
the stated capacity.
Backing up the system partition
You can back up the system partition to an image file. This image file can be used to restore the
system partition. To back up the system partition:
1
In Windows, press the Novo button or double-click OneKey Recovery icon to start the
Lenovo OneKey Recovery System.
2
3
Click System Backup.
Select a back-up location and click Next to start the backup.
Notes:
•
•
You can choose a back-up location on the local hard disk drive or an external storage device.
Remove the removable hard disk drive before starting the Lenovo OneKey Recovery System.
Otherwise, data from the removable hard disk drive might be lost.
•
•
The back-up process may take a while.
The back-up process is only available when Windows can be started normally.
Restoring
You can choose to restore the system partition to its original status or to a previously created
back-up point. To restore the system partition:
1
In Windows, press the Novo button or double-click OneKey Recovery icon to start the
Lenovo OneKey Recovery System.
2
3
Click System Recovery. The computer will restart to the recovery environment.
Follow the on-screen instructions to restore the system partition to its original status or to
a previously created back-up point.
Notes:
•
•
•
The recovery process is irreversible. Make sure to back up any data you wish to save on the system
partition before starting the recovery process.
The recovery process may take a while. So be sure to connect the AC power adapter to your computer
during the recovery process.
The above instructions should be followed when Windows can be started normally.
If Windows cannot be started, then follow the steps below to start the Lenovo OneKey
Recovery System:
1
2
Shut down the computer.
Press the Novo button. From Novo Button Menu, select System Recovery and press Enter.
23
Chapter 4. Troubleshooting
Frequently asked questions---------------------------------------------------------------------------
This section lists frequently asked questions by category.
Finding information
What safety precautions should I follow when using my computer?
The Lenovo Safety and General Information Guide which came with your computer contains safety
precautions for using your computer. Read and follow all the precautions when using your
computer.
Where can I find the hardware specifications for my computer?
You can find the hardware specification for your computer on the printed flyers which came
with your computer.
Where can I find warranty information?
For detailed warranty information on this machine, please visit below website to check out:
Drivers and preinstalled software
Where are the installation discs for Lenovo preinstalled software (desktop software)?
Your computer did not come with installation discs for Lenovo preinstalled software. If you
need to reinstall any preinstalled software, you can find the installation program on the D
partition of your hard disk. If you cannot find the installation program there, you can also
download it from the Lenovo consumer support website.
Where can I find drivers for the various hardware devices of my computer?
If your computer is preinstalled with a Windows operating system, Lenovo provides drivers for
all the hardware devices that you need on the D partition of your hard disk. You can also
download the latest device drivers from the Lenovo consumer support website.
Lenovo OneKey Recovery System
Where are the recovery discs?
Your computer did not come with any recovery discs. Use the Lenovo OneKey Recovery System
if you need to restore the system to its original factory status.
What can I do if the back-up process fails?
If you can start the backup but it fails during the back-up process, try the following steps:
1
Close all open programs, and then restart the back-up process.
2
Check to see if the destination media is damaged. Select another path and then try again.
When do I need to restore the system to its factory status?
Use this feature when the operating system fails to start up. If there is critical data on the system
partition, back it up before starting recovery.
24
Chapter 4. Troubleshooting
BIOS setup utility
What is the BIOS setup utility?
The BIOS setup utility is a ROM-based software. It displays basic computer information and
provides options for setting boot devices, security, hardware mode, and other preferences.
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1
Shut down the computer.
2
Press the Novo button and then select BIOS Setup.
Getting help
How can I contact the customer support center?
See “Chapter 3. Getting help and service” in the Lenovo Safety and General Information Guide.
25
Chapter 4. Troubleshooting
Troubleshooting -------------------------------------------------------------------------------------------------------
Display problems
When I turn on the
computer, nothing appears
on the screen.
•
If the screen is blank, make sure that:
- The AC power adapter is connected to the computer, and
the power cord is plugged into a working electrical outlet.
- The computer power is on. Press the Power button again
for confirmation.
•
•
If these items are properly set, and the screen remains blank,
have the computer serviced.
When I turn on the
computer, only a white
cursor appears on a
blank screen.
Restore backed-up files to your Windows environment or the
entire contents of your hard disk to its original factory contents
using the Lenovo OneKey Recovery System. If you still see
only the cursor on the screen, have the computer serviced.
The screen goes blank
while the computer is on.
•
Your screen saver or power management may be enabled.
Do one of the following to resume from sleep mode:
- Press any key on the keyboard. (Notebook mode only)
- Press the Power button.
- Press the Windows button.
- Press F9 (
) to confirm whether the backlight of the
LCD screen has been turned off.
Sleep problems
The critical low-battery
error message appears,
and the computer
•
•
The battery power is getting low. Connect the AC power
adapter to the computer.
immediately turns off.
The computer enters sleep
mode immediately after
Power-on self-test
(POST).
Make sure that:
- The battery pack is charged.
- The operating temperature is within the acceptable range.
See “Chapter 2. Use and care Information” in the Lenovo
Safety and General Information Guide.
Note: If the battery pack is charged and the temperature is within range, have the computer serviced.
26
Chapter 4. Troubleshooting
The computer does not
return from sleep mode,
and the computer does
not work.
•
•
If your computer is in sleep mode, connect the AC power
adapter to the computer, then press the Windows button or
the Power button.
If the system still does not return from sleep mode, stops
responding, or cannot be turned off, reset the computer.
Unsaved data may be lost. To reset the computer, press and
hold the Power button for eight seconds or more. If the
computer is still not reset, remove the AC power adapter.
Display panel problems
The screen is blank.
•
Do the following:
- If you are using the AC power adapter or the battery pack,
and the battery status indicator is on, press F12 (
) to
make the screen brighter.
- If the power indicator is blinking, press the Power button to
resume from sleep mode.
- Press F9 (
) to confirm whether the backlight of the
LCD screen has been turned off.
- If the problem persists, follow the solution in the next
problem “The screen is unreadable or distorted.”
The screen is unreadable
or distorted.
•
•
Make sure that:
- The screen resolution and color quality are correctly set.
- The monitor type is correct.
Incorrect characters
appear on the screen.
Is the operating system or programs installed correctly?
If they are installed and configured correctly, have the
computer serviced.
Sound problems
No sound can be heard
from the speakers even
when the volume is
turned up.
•
Make sure that:
- The Mute function is off.
- The combo audio jack is not being used.
- Speakers are selected as the playback device.
27
Chapter 4. Troubleshooting
Battery pack problems
Your computer shuts down
before the battery status
indicator shows empty.
-or-
•
Recharge the battery.
Your computer operates
after the battery status
indicator shows empty.
Other problems
Your computer does
not respond.
•
•
To turn off your computer, press and hold the Power button
for eight seconds or more. If the computer still does not
respond, remove the AC power adapter.
Your computer might lock when it enters sleep mode during
a communication operation. Disable the sleep timer when
you are working on the network.
The connected external
device does not work.
•
•
Do not connect or disconnect any external device cables other
than USB while the computer power is on. Otherwise,
you might damage your computer.
When using high power consumption external devices such
as an external USB optical disk drive, use an external device
power adapter. Otherwise, the device may not be recognized,
or the system may shut down as a result.
28
Trademarks
The following terms are trademarks or registered trademarks of Lenovo in the United States,
other countries, or both.
Lenovo
OneKey
Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other
countries, or both.
Other company, products, or service names may be trademarks or service marks of others.
29
en-US
Rev. RP01
|