KDC-X598
KDC-BT558U
KMR-D558BT
CIND-SRETCERIVUERCTION MANUAL
AMMOPLID-TUENDER’LEECMTEPURLDOEICD
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures
will help you obtain the best performance from your new
CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the
spaces designated on the warranty card, and in the space provided
below. Refer to the model and serial numbers whenever you
call upon your Kenwood dealer for information or service on the
product.
Model KDC-X598/ KDC-BT558U/ KMR-D558BT
Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2013 JVC KENWOOD Corporation
GET0995-001B (KW/K0)
BASICS
Faceplate
Remote control (RC-406)
KMR-D558BT
(except for
)
Volume knob
(turn/press)
Display window
Remote sensor (Do not expose
to bright sunlight.)
Pull out the
insulation sheet
when using for the
first time.
Detach button
Attach
Detach
How to reset
How to replace the battery
Your preset
adjustments will also
be erased.
To
Do this (on the faceplate)
Do this (on the remote control)
Turn on the power
Press and hold SRC to turn off the power.
Press BSRC.
• Press and hold to turn off the power.*
Turn the volume knob.
( Pressing SRC does not turn on the power. )
Adjust the volume
Press VOL
or VOL
.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source
Press SRC repeatedly.
Press BSRC repeatedly.
Change the display
information
Press DISP SCRL repeatedly.
• Press and hold to scroll the current display information.
( not available )
KMR-D558BT
* For
: The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
3
ENGLISH |
GETTING STARTED
3
Set the initial settings
1
2
3
Press BSRC to enter STANDBY.
Press the volume knob to enter [FUNCTION]
.
Turn the volume knob to make a selection (see the following table), then press the
knob.
4
Press and hold
to exit.
1
To return to the previous setting item or hierarchy, press
.
Cancel the demonstration
Default: XX
When you turn on the power (or after you reset the
unit), the display shows: “CANCEL DEMO” “PRESS”
“VOLUME KNOB”
AUDIO CONTROL
SP SELECT
OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches
1
Press the volume knob.
[YES] is selected for the initial setup.
Press the volume knob again.
“DEMO OFF” appears.
or 6 inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU
2
ON: Both display and button illumination change to white color when entering [FUNCTION]. ;
OFF: Both display and button illumination remain as [COLOR SELECT] color.
(
18)
KMR-D558BT
For
,
[DEMO OFF] is selected initially.
TUNER SETTING
PRESET TYPE
NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;
MIX: Memorizes one station or SiriusXM channel for each preset button, regardless of the selected
band or SiriusXM channel.
2
Set the clock
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [CLOCK], then press
the knob.
SYSTEM
KEY BEEP
SOURCE SELECT
ON: Activates the keypress tone. ; OFF: Deactivates.
3
4
Turn the volume knob to select [CLOCK ADJUST], then
press the knob.
PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables.
IHEART SRC ON: Enables IHEARTRADIO in source selection. ; OFF: Disables.
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. 8)
: Automatically distinguishes between audio file disc and music CD. ;
music CD. No sound can be heard if an audio file disc is played.
(
8)
(
Turn the volume knob to make the settings, then
press the knob.
9)
Day Hour Minute
(
5
6
7
Turn the volume knob to select [CLOCK FORMAT],
CD READ
1
2: Forces to play as an
then press the knob.
Turn the volume knob to select [12H] or [24H], then
F/W UPDATE
UPDATE SYSTEM / UPDATE BT
press the knob.
Press and hold
to exit.
To return to the previous setting item or hierarchy,
F/W UP
xx.xx
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
press
4
.
RADIO
Other settings
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to make a selection (see the following table), then press
the knob.
3
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
Default: XX
Search for a station
TUNER SETTING
1
2
Press BSRC to select TUNER.
AUTO
MEMORY
YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
(Selectable only if [NORMAL] is selected for [PRESET TYPE].) 4)
Press J BAND repeatedly (or press AM– / #FM+ on
*
(
RC-406) to select FM1/ FM2/ FM3/ AM.
Press S / T (or press S / T (+) on RC-406) to
search for a station.
3
MONO SET
TI
ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.
ON: Allows the unit to temporarily switch to Traffic Information. ; OFF: Cancels.
Selects the available Program Type (see below), then, press S / T to start.
• To change the searching method for S / T: Press
K SEEK repeatedly.
AUTO1: Automatically search for a station.
AUTO2: Search for a preset station.
MANUAL: Manually search for a station.
• To store a station: Press and hold one of the number
buttons (1 to 6).
• To select a stored station: Press one of the number
buttons (1 to 6) (or press one of the number buttons
(1 to 6) on RC-406).
PTY SEARCH
CLOCK
TIME SYNC
ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. ;
OFF: Cancels.
•
[MONO SET]
/
[TI]
/
[PTY SEARCH] is selectable only when the band is FM1/ FM2/ FM3.
• Available Program Type:
INFORM (information), SPORTS
PERSNLTY (personality), PUBLIC COLLEGE
ROCK CLS ROCK (classic rock), ADLT HIT (adult hits), SOFT RCK (softrock), TOP 40
COUNTRY OLDIES SOFT
SPEECH
:
NEWS
,
,
TALK
,
,
LANGUAGE, REL TALK (religious talk),
,
HABL ESP (spanish talk), WEATHER
MUSIC
:
,
,
,
,
,
NOSTALGA (nostalgia), JAZZ, CLASSICL (classical), R & B
(rhythm and blues), SOFT R&B (soft rhythm and blues), REL MUSC (religious
Direct Access Tuning (using RC-406)
music), MUSC ESP (spanish music), HIP HOP
KMR-D558BT
(except for
)
The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if
1
2
3
Press DIRECT to enter Direct Access Tuning.
Press the number buttons to enter a frequency.
Press ENT IW to search for a station.
selected.
• If the volume is adjusted during reception of traffic information or alarm, the adjusted
volume is memorized automatically. It will be applied the next time traffic information
or alarm function is turned on.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct
Access Tuning is automatically canceled.
5
ENGLISH |
CD / USB / iPod
Start playback
The source changes automatically and
playback starts.
CD
Label side
M
Eject disc
To
Do this
Pause or resume
playback
Press 6 IW (or press ENT IW on RC-406).
Select a track/file
Press S / T (or press S / T (+) on RC-406).
USB
USB input terminal
3
*
Select a folder
Press J/ K (or press AM– / #FM+ on RC-406).
*
CA-U1EX (max.: 500 mA)
(optional accessory)
Reverse/
Fast-forward
Press and hold S / T (or press and hold S / T (+) on RC-406).
4
*
Repeat play
Press 4
repeatedly.
• Audio CD: TRACK REPEAT, REPEAT OFF
• MP3/WMA/WAV file or iPod: FILE REPEAT, FOLDER REPEAT, REPEAT OFF
• KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC) file
iPod/iPhone
(
18): FILE REPEAT, REPEAT OFF
USB input terminal
4
*
Random play
Press 3 repeatedly.
• Audio CD: DISC RANDOM, RANDOM OFF
• MP3/WMA/WAV file or iPod or KME Light/ KMC file: FOLDER RANDOM,
RANDOM OFF
5
*
Press and hold 3
to select “ALL RANDOM”.
1
*
*
*
*
*
Do not leave the cable inside the car when not using.
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone
2
3
4
5
You can still play/pause, file skip, fast-forward or reverse files from the unit.
Only for MP3/WMA/WAV files. This does not work for iPod.
For iPod: Applicable only when [MODE OFF] is selected.
For CD: Only for MP3/WMA files.
1
*
Press 5 iPod to select the control mode
while in iPod source.
2
*
MODE ON: From the iPod .
If you connect the iPod/iPhone to the USB input terminal of the unit (while listening to TuneIn Radio,
TuneIn Radio Pro or Aupeo), the unit will output the sound from these apps.
MODE OFF: From the unit.
6
CD / USB / iPod
Select a track/file from a list
Direct Music Search (using RC-406)
Set the skip search ratio
While listening to iPod or KME Light/ KMC file...
KMR-D558BT
(except for
)
For iPod: Applicable only when [MODE OFF] is
selected.
(
6)
1
2
Press DIRECT.
1
Press the volume knob to enter [FUNCTION].
1
Press
.
Press the number buttons to enter a track/
file number.
2
Turn the volume knob to select [USB], then
press the knob.
2
Turn the volume knob to make a selection,
then press the knob.
3
Press ENT IW to search for music.
3
4
Turn the volume knob to select
[SKIP SEARCH], then press the knob.
Turn the volume knob to make a selection,
then press the knob.
• MP3/WMA/WAV file: Select the desired
folder, then a file.
• To cancel, press
.
• Not available if Random Play is selected.
• Not applicable for iPod, KME Light/ KMC file.
• iPod or KME Light/ KMC file: Select the
desired file from the list (PLAYLISTS,
0.5% (default)/ 1% 5%/ 10%: Skip search
/
ratio over the total files.
*
ARTISTS, ALBUMS, SONGS, PODCASTS ,
Select a song by name
5
Press and hold
to exit.
*
GENRES, COMPOSERS ).
While listening to iPod...
*
Only for iPod.
1
2
Press
.
Change the USB drive
• To return to the root folder (or first file), press
number button 5 iPod.
Turn the volume knob to select a category,
then press the knob.
When a smartphone (Mass Storage Class) is
connected to the USB input terminal, you can
select its internal memory or external memory
(such as an SD card) to playback the stored songs.
You can also select the desired drive to playback
when a multiple drives device is connected.
Press 5 iPod repeatedly to select the desired
drive.
(or)
• To return to the previous setting item or
3
4
5
Turn the volume knob quickly to enter
character search.
Turn the volume knob to select the
character to be searched for.
Press S / T to move to the entry
position.
hierarchy, press
.
• To cancel, press and hold
.
If you have many files....
You can search through them quickly (on step 2
above) at a preset skip search ratio by pressing
S / T.
You can enter up to 3 characters.
Press the volume knob to start searching.
Turn the volume knob to make a selection,
then press the knob.
6
7
• See also “Set the skip search ratio.”
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [USB], then
press the knob.
• Pressing and holding S / T skip songs at
the maximum ratio (10
%) regardless of the
Repeat step 7 until the desired item is
setting made.
selected.
3
4
Turn the volume knob to select
[MUSIC DRIVE], then press the knob.
Press the volume knob to select
• For USB: Only for files registered in the
database created with KME Light/ KMC.
• Not applicable for audio CD.
• To search for a character other than A to Z
and 0 to 9, enter only “ ”.
*
• To return to the previous hierarchy, press
[DRIVE CHANGE]
.
.
The next drive is selected automatically.
• To return to the top menu, press number
Repeat steps 1 to 4 to select the following
button 5 iPod.
drives.
• To cancel, press and hold
.
Selectable items: [DRIVE 1] to [DRIVE 5]
7
ENGLISH |
AUX
Pandora®
Preparation:
Preparation:
To
Do this
Select [ON] for [BUILT-IN AUX]
.
(
4)
Install the latest version of the Pandora
application onto your device (iPhone/
iPod touch), then create an account and
log in to Pandora.
Pause or resume
playback
Press 6 IW (or press ENT IW
on RC-406).
Start listening
1
Connect a portable audio player
(commercially available).
Thumbs up or
thumbs down
Press J / K .
• If thumbs down is selected, the
current track is skipped.
• Select [ON] for [PANDORA SRC]
.
(
4)
Auxiliary input jack
Start listening
Skip a track
Press T (or press T (+) on
1
Open the Pandora application on
RC-406).
your device.
2
Connect your device to the USB
input terminal.
Create a new
station
1
2
Press and hold the volume
knob.
Turn the volume knob to
select [FROM TRACK] or [FROM
ARTIST], then press the knob.
A new station is created based
on the current song or artist.
Portable audio
player
3.5 mm (1/8") stereo mini plug with
“L” shaped connector (commercially
available)
USB input terminal
2
3
Press BSRC to select AUX.
Turn on the portable audio player and
start playback.
Save a station
Press and hold one of the
number buttons (1 to 5) to
store.
• To select a stored station, press
one of the number buttons
(1 to 5).
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone
*
Set the AUX name
The source changes to PANDORA and
broadcast starts.
While listening to a portable audio player
connected to the unit...
1
2
Press the volume knob to enter [FUNCTION].
Search for a
registered
station
1
2
Press
.
* Do not leave the cable inside the car
when not using.
Turn the volume knob to select [SYSTEM]
,
Turn the volume knob to
make a selection, then press
the knob (or press J/ K on
RC-406).
then press the knob.
3
4
Turn the volume knob to select [AUX NAME
SET], then press the knob.
Turn the volume knob to make a selection,
then press the knob.
[BY DATE]: According to the
registered date.
[A-Z]: Alphabetical order.
Turn the volume knob to the
desired station, then press the
knob.
AUX (default)/ DVD PORTABLE/ GAME/ VIDEO/ TV
/
5
Press and hold
to exit.
3
8
iHeartRadio®
Preparation:
To
Do this
Skip cities by alphabetical order
Install the latest version of iHeart Link for
KENWOOD application onto your device
(iPhone/ iPod touch), then create an account
and log in to iHeartRadio
While a city list appears during search...
Pause or
resume
playback
Press 6 IW (or press
ENT IW on RC-406).
1
2
3
4
Turn the volume knob quickly to enter
character search.
Turn the volume knob or press S / T
to select the character to be searched for.
Press J/ K to move to the previous/next
page.
• Select [ON] for [IHEART SRC]
.
(
4)
Thumbs up or
thumbs down
for custom
station
Press J / K .
• If thumbs down is selected,
the current track is skipped.
Start listening
1
Open the iHeart Link application on
Press the volume knob to start searching.
your device.
Skip a track for
custom station
Press T (or press T (+)
on RC-406).
To cancel, press and hold
.
2
Connect your device to the USB input
terminal.
Create a new/
custom station
Press 1.
Delete a station
USB input terminal
While listening to IHEARTRADIO...
Add to favorite
stations for live
station
Press 2.
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [SYSTEM]
then press the knob.
,
3
4
5
Turn the volume knob to select [STATION
DEL], then press the knob.
Turn the volume knob to select [LIVE] or
[CUSTOM], then press the knob.
Turn the volume knob to select the
desired station to delete, then press the
knob.
Turn the volume knob to select [YES], then
Scan for live
station
Press 5.
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone
*
3
Press BSRC to select IHEARTRADIO.
Broadcast starts automatically.
Search for a station
Press
1
2
.
Turn the volume knob to select a category,
then press the knob.
* Do not leave the cable inside the car when
not using.
6
7
press the knob.
Press and hold
3
Turn the volume knob to the desired station,
then press the knob.
to exit.
To return to the previous setting item or
hierarchy, press
When a city list appears, you can skip cities in
alphabetical order.
.
(or using RC-406)
Press J/ K to search for a station.
To cancel, press and hold
.
9
ENGLISH |
SiriusXM® Radio
Preparation:
If a locked channel or a mature channel ([MATURE CH] is set to [ON]) is selected,
1
Connect the optional SiriusXM Vehicle Tuner (commercially
available).
a pass code input screen appears. Enter the pass code to receive the channel.
• To change the tuning method for S / T: Press K SEEK.
Each time you press K SEEK, the tuning method switches between
“CHANNEL” (manually search for a channel) and “PRESET” (searches for a
preset channel of the selected band).
Antenna
• To store a channel of the current band: Press and hold one of the number
Expansion port on
the rear panel
SiriusXM Vehicle Tuner
buttons (1 to 6).
• To select a stored channel of the current band: Press one of the number
buttons (1 to 6).
2
activatenow or call 1-866-635-2349.
The Radio ID is required to activate the SiriusXM Vehicle Tuner.
The Radio ID is located on the label of the SiriusXM Vehicle Tuner
and can also be shown on the unit’s display window when you
select “Channel 0” after SiriusXM Vehicle Tuner is connected.
For users in Canada: To activate SiriusXM Canada service go to
corner, or call 1-877-438-9677.
Direct Access Tuning (using RC-406)
KMR-D558BT
(except for
)
1
2
3
Press DIRECT to enter Direct Access Tuning.
Press the number buttons to enter a channel number.
Press S / T (+) to start searching.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
3
Press BSRC to select SIRIUS XM to start updating.
Start listening
SiriusXM Replay™
1
2
3
Press BSRC to select SIRIUS XM.
Press J BAND repeatedly to select a band.
Press and hold K SEEK (or K on RC-406).
Replay starts from the live position and “ ” lights up.
Press
.
“
” lights up.
4
Turn the volume knob to select a category, then press the knob.
If “ALL CHANNELS” is selected, all the available channels will be
shown.
Turn the volume knob to select a channel, then press the knob.
(or)
Press S / T to search for a channel manually.
• Pressing and holding S / T changes the channel rapidly.
During Replay...
• To pause or resume playback, press 6 IW (or press ENT IW on
RC-406).
5
• To skip the current song backward/forward, press S / T (or press
S / T (+) on RC-406).
• To rewind/fast-forward, press and hold S / T (or press and hold
S / T (+) on RC-406).
• To exit from Replay and go to live, press and hold K SEEK (or press and
hold K on RC-406).
10
SiriusXM® Radio
Default: XX
Smart Favorites
There are two types of lock functions available:
• SiriusXM-defined: When [MATURE CH] is set to [ON]
• User-defined: Using [CHANNEL EDIT] when [MATURE CH] is set to [OFF]
User stored channels (1 to 6) of the current
band are recognized as Smart Favorite
channels. SiriusXM Vehicle Tuner automatically
buffered their broadcasting content in the
background.
• Smart Favorite channel is available with
SXV200 or later SiriusXM tuner models.
CHANNEL LOCK
To unlock settings:
1
2
3
4
Turn the volume knob to select a number.
Press S / T to move to the entry position.
Repeat steps
Press the volume knob to confirm.
1
and to enter the current pass code. (Initial pass code is 0000.)
2
When you select a Smart Favorite channel,
you can rewind and replay up to 30 minutes of
any of the missed news, talk, sports or music
content.
CODE SET
1
2
3
4
5
Turn the volume knob to select a number.
Press S / T to move to the entry position.
Repeat steps
1
and to enter a new 4-digit pass code.
2
Press the volume knob to confirm.
Repeat steps to to reconfirm the pass code.
1
Press one of the number buttons (1 to 6)
1
4
to select a channel.
• Make a note of the new pass code to enter channel lock settings from next time.
2
For operation ( 10, SiriusXM Replay
™)
CHANNEL EDIT
*
1
2
Turn the volume knob to select a category, then press the knob.
Turn the volume knob to select a channel you want to lock, then press the knob.
“L” appears in front of the channel number.
SiriusXM settings
3
Press and hold
to exit.
1
2
Press the volume knob to enter [FUNCTION].
CHANNEL CLEAR
*
YES: Clears all the locked channels. ; NO: Cancels.
Turn the volume knob to select [SIRIUS XM]
,
then press the knob.
MATURE CH
ON: Turns on the SiriusXM-defined lock setting (mature channel). ; OFF: Turns off.
• If [ON] is selected, your setting [CHANNEL EDIT] is temporary ignored.
3
Turn the volume knob to make a selection
(see the following table), then press the
knob.
SIGNAL LEVEL
BUFFER USAGE
SXM RESET
WEAK
0%
/
GOOD
/
STRONG: Shows the strength of the current received signal.
4
Press and hold
to exit.
—
100%
(0): Shows the memory usage for Replay buffer.
To return to the previous setting item or
hierarchy, press
YES: Resets stored channel, locked channel setting and Mature CH setting to default. ; NO: Cancels.
.
* Displayed only when [MATURE CH] is set to [OFF]
.
11
ENGLISH |
BLUETOOTH®
You can operate Bluetooth devices using this unit.
• Pairing request (via Bluetooth) is
Pair a Bluetooth device
automatically activated if an iPhone/iPod
touch is connected through the USB input
terminal. (Applicable only if [AUTO PAIRING] is
When connecting a Bluetooth device to
the unit for the first time, perform pairing
between the unit and the device. Once the
pairing is completed, the Bluetooth device
will remain registered in the unit even if you
reset the unit.
Connect the microphone
MIC (Microphone input terminal)
Microphone (supplied)
set to [ON].)
(
16)
Press the volume knob to pair once you
have confirm the device name.
• Up to five devices can be registered (paired)
in total.
• A maximum of two Bluetooth phones
and one Bluetooth audio device can be
connected at any time.
• This unit supports Secure Simple Pairing
(SSP).
Bluetooth test mode
Rear panel
You can check the connectivity of the
supported profile between the Bluetooth
device and the unit.
• Make sure there is no Bluetooth device
connected.
• Some Bluetooth devices may not
automatically connect to the unit after
pairing. Connect the device to the unit
manually. Refer to the instruction manual of
the Bluetooth device for more information.
1
Press and hold
.
“PLEASE PAIR YOUR PHONE” appears.
Search and select this unit model name
(KDC-X5**/ KDC-BT5**U/ KMR-D5**BT)
on the Bluetooth device.
Adjust the microphone
angle
2
Secure using cord clamps (not
supplied) if necessary.
1
2
Press BSRC to turn on the unit.
Search and select this unit model name
(KDC-X5**/ KDC-BT5**U/ KMR-D5**BT)
on the Bluetooth device.
3
Operate the Bluetooth device to confirm
pairing.
“TESTING” flashes on the display.
If you turn off the unit or detach the control panel
during a phone call conversation, the Bluetooth
connection is disconnected. Continue the
conversation using your mobile phone.
“PAIRING” “PASS XXXXXX” Device
name “PRESS” “VOLUME KNOB”
scrolls on the display.
Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is
completed and “ ” will light up when the
Bluetooth connection is established.
The connectivity result (OK or NG) appears
after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP)
compatibility
AUD CNT: Advanced Audio Distribution
Profile (A2DP) compatibility
PB DL:
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
– Object Push Profile (OPP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
3
Phonebook Access profile (PBAP)
compatibility
• For some Bluetooth devices, you may need
to enter the Personal Identification Number
(PIN) code immediately after searching.
• To cancel check mode, press and hold
BSRC to turn off the unit.
12
BLUETOOTH®
Bluetooth mobile phone
Improve the sound quality during a call
While talking on the phone...
To
Do this
Press
1
Press the volume knob to enter [FUNCTION].
Receive a call
or the volume knob or one of the
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
number buttons (1 to 6) (or press
on
RC-406).
3
Press and hold
to exit.
• All the buttons and display flash when there
is an incoming call.
To return to the previous setting item or hierarchy, press
.
Default: XX
During a call, the buttons and display
illuminate according to the settings made for
[DISPLAY]
• When [AUTO ANSWER] is set to the selected
time, the unit answers incoming call
automatically.
MIC GAIN
–20 — +
8
(0): The sensitivity of the microphone increases as the
.
(
18)
number increased.
NR LEVEL
–5 –20 –10): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
10 ): Adjust the echo cancellation delay time until the least echo
is being heard during a phone conversation.
—
(
(
14)
ECHO CANCEL
1
—
(4
Reject an incoming
call
Press BSRC (or press
on RC-406).
or BSRC (or press on RC-406).
End a call
Press
Text message notification
Switch between
hands-free and
private talk modes
Press 6 IW during a call.
When the phone receives a text message, the unit rings and “SMS
RECEIVED” appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
• Operations may vary according to the
connected Bluetooth device.
Adjust the phone
volume
Turn the volume knob during a call.
Phone volume: [00] to [35] (Default: [15]
)
• This adjustment will not affect the volume of
the other sources.
Use Voice Recognition
1
Press and hold
to activate Voice Recognition.
Switch between two
connected phones
Press
repeatedly.
The connected phone (which has been paired the earliest) is
activated. However, if priority device is connected, pressing and
• Not applicable during a call.
holding
activate the priority device.
(
15, DVC PRIORITY)
2
Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
13
ENGLISH |
BLUETOOTH®
VOICE
Speak the name of the contact you want to call or the voice command to
control the phone functions. 13)
Bluetooth mode operations
(
1
2
Press
to enter Bluetooth mode.
Turn the volume knob to make a selection (see the following table),
then press the knob.
BATT*
LOW MID FULL: Shows the strength of the battery.
NO SIGNAL LOW MID MAX: Shows the strength of the current
received signal.
/
/
SIGNAL*
/
/
/
3
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
SETTINGS
Default: XX
AUTO ANSWER
1
—
30: The unit answer incoming call automatically in the selected
1
Press the volume knob to select a name or a phone number.
• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the
display to indicate the previous call status.
• Press DISP SCRL to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
Press the volume knob to call.
CALL
HISTORY
time. ; OFF: Cancels.
RING MODE
SYSTEM: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
•
•
CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming
calls.
MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for
incoming text messages.
2
PHONE
BOOK
1
2
Turn the volume knob to select a name, then press the knob.
Turn the volume knob to select a phone number, then press the knob to
call.
PHONE: The unit uses the connected phones’ ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it
does not support this feature.)
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does not
support PBAP, “TRANSFER PB” appears. Transfer the phonebook manually.
SMS NOTIFY*
ON: The unit rings and “SMS RECEIVED” appears to notify you of an
incoming text message. ; OFF: Cancels.
(
16, TRANSFER PB)
• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL
• This unit can display only non-accent letters. (Accent letters such as “Ú” is
showns as “U”.)
* Functionality depends on the type of the phone used.
• If the phonebook contains many contacts,
(
Select a contact by name).
Turn the volume knob to select a number (0 to 9) or character ( , #, +).
Press S / T to move the entry position.
Repeat steps and until you finish entering the phone number.
Select a contact by name
NUMBER
DIAL
1
2
• You can search through the contacts quickly according to the first letter
(A to Z), number (0 to 9), or symbol.
• The second alphabet of the contact will be searched if the first alphabet
does not exist.
1
2
3
Press the volume knob to call.
(or using RC-406)
Press the number buttons (
Press to call.
1
2
Press
to enter Bluetooth mode.
1
2
0
to 9) to enter the phone number.
Turn the volume knob to select [PHONE BOOK], then press the knob.
14
BLUETOOTH®
3
4
Turn the volume knob quickly to enter alphabet search mode.
The first menu (ABCDEFGHIJK) appears. To go to the other menu
(LMNOPQRSTUV or WXYZ1 ), press J/ K.
Delete a contact
Not applicable for mobile phone that supports PBAP.
Turn the volume knob or press S / T to select the desired first
1
2
Press
to enter Bluetooth mode.
letter, then press the knob.
Turn the volume knob to select [CALL HISTORY] or [PHONE BOOK], then
press the knob.
• To search with numbers, select “1”.
• To search with symbols, select “ ”.
3
Turn the volume knob to select a contact.
If a contact is selected, press the volume knob to show the phone
number.
5
6
Turn the volume knob to select a name, then press the knob.
Turn the volume knob to select a phone number, then press the
knob to call.
4
5
Press and hold the volume knob to enter delete mode.
Turn the volume knob to select [DELETE ONE] or [DELETE ALL], then
press the knob.
To return to the previous hierarchy, press
.
DELETE ONE: Selected name or phone number in step 3 is deleted.
DELETE ALL: All names or phone numbers from the selected menu in
step 2 is deleted.
Store a contact in memory
You can store up to 6 contacts.
6
Turn the volume knob to select [YES] or [NO], then press the knob.
1
2
Press
to enter Bluetooth mode.
Turn the volume knob to select [CALL HISTORY] [PHONE BOOK], or
,
[NUMBER DIAL], then press the knob.
Bluetooth mode settings
3
4
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
Press and hold one of the number buttons (1 to 6).
“STORED” appears when the contact is stored.
1
2
3
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [BT MODE], then press the knob.
Turn the volume knob to make a selection (see the following table),
then press the knob.
4
Press and hold
to exit.
To erase a contact from the preset memory, select [NUMBER DIAL] in
step and store a blank number.
To return to the previous setting item or hierarchy, press
.
2
Default: XX
PHONE SELECT
Make a call from memory
Selects the phone or audio device to connect or disconnect.
“ ” appears in front of the device name.
AUDIO SELECT
DEVICE DELETE
1
2
3
Press
to enter Bluetooth mode.
Press one of the number buttons (1 to 6).
Press the volume knob to call.
“NO MEMORY” appears if there is no contacts stored.
1
Turn the volume knob to select a device to delete, then press the
knob.
2
Turn the volume knob to select [YES] or [NO], then press the knob.
DVC PRIORITY
Selects a device to be connected as priority device.
“ ” appears in front of the device name set as priority.
15
ENGLISH |
BLUETOOTH®
Internet radio via Bluetooth
Bluetooth audio player
TRANSFER
PB
“DL PB
” appear and transfer the
Operations and display indications may differ
according to their availability on the connected
device.
phonebook of the connected phone to
this unit manually.
* Selectable only when the connected
phone supports OPP.
*
Listen to Pandora
Preparation:
Select [ON] for [PANDORA SRC]
.
(
4)
You can listen to Pandora on your smart phone
(Android OS) through Bluetooth on this unit.
To
Do this
PIN CODE
EDIT
(0000)
Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a
number.
Playback
1 Press BSRC (or press
SRC on RC-406) to select
BT AUDIO.
1
Open the Pandora application on your
device.
2
Press S / T to move the entry
position.
2
3
Connect to Bluetooth audio player.
(
12)
2 Operate the Bluetooth
audio player to start
playback.
Press BSRC to select PANDORA.
The source switches and broadcast starts
automatically.
Repeat steps
1
and until you
2
finish entering the PIN code.
Press the volume knob to confirm.
3
Pause or resume
playback
Press 6 IW (or press
ENT IW on RC-406).
• You can operate Pandora in the same way as
RECONNECT
ON: The unit automatically reconnect
when the Bluetooth device is within
range. ; OFF: Cancels.
Pandora for iPod/iPhone.
(
8)
Select group or
folder
Press J/ K (or press
AM– / #FM+ on RC-406).
*
Listen to iHeartRadio
AUTO
PAIRING
ON: The unit automatically pair
supported Bluetooth device (iPhone/
iPod touch) when it is connected
through USB input terminal. Depending
on the iOS version of the connected
iPhone/iPod touch, this function may
not work. ; OFF: Cancels.
Reverse/forward
skip
Press S / T (or press
Preparation:
Select [ON] for [IHEART SRC]
S / T (+) on RC-406).
.
(
4)
Reverse/fast-
forward
Press and hold S / T
(or press and hold
S / T (+) on RC-406).
You can listen to iHeartRadio on your smart
phone (Android OS) through Bluetooth on this
unit.
1
2
3
Open the iHeart Link application on your
smart phone.
Repeat play
Press 4
make a selection.
repeatedly to
BT HF/AUDIO FRONT: Ouputs audio from the front left
and right speakers. ; ALL: Outputs audio
from all the speakers.
Connect your smart phone via Bluetooth
ALL REPEAT, FILE REPEAT,
REPEAT OFF
connection.
(
12)
Press BSRC to select IHEARTRADIO.
The source switches and broadcast starts
automatically.
INITIALIZE
YES: Initializes all the Bluetooth settings
(including stored pairing, phonebook,
and etc.). ; NO: Cancels.
Random play
Press 3
make a selection.
repeatedly to
• You can operate iHeartRadio in the same way
as iHeartRadio for iPod/iPhone.
FOLDER RANDOM,
RANDOM OFF
(
9)
Press and hold 3
to
select “ALL RANDOM.”
16
AUDIO SETTINGS
While listening to any source...
PRESET EQ
DRIVE EQ
NATURAL
/
/
TOP40
/
POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/
1
2
3
Press the volume knob to enter [FUNCTION].
USER: Selects a preset equalizer suitable to the music
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
Turn the volume knob to make a selection (see the following table),
then press the knob.
genre. (Select [USER] to use the customized bass, middle, and treble
settings.)
[DRIVE EQ] is a preset equalizer that reduces noise from the road.
Repeat step 3 until the desired item is selected or activated.
BASS BOOST
LOUDNESS
LEVEL1
/
LEVEL2/ LEVEL3: Selects your preferred bass boost level. ;
4
Press and hold
to exit.
OFF: Cancels.
(or using RC-406)
1 Press AUD to enter [AUDIO CONTROL]
2 Press J/ K to make a selection, then press ENT IW.
LEVEL1 LEVEL2: Selects your preferred low and high frequencies
/
.
boost to produce a well-balanced sound at a low volume level. ;
OFF: Cancels.
To return to the previous setting item or hierarchy, press
.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ; 85HZ 120HZ/
/
Default: XX
160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/
SUB-W LEVEL –15 to +15 (0) Adjusts the subwoofer output level.
160 Hz are sent to the subwoofer.
BASS LEVEL –8 to +8 (+6)
SUB-W PHASE
HPF
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[LPF SUBWOOFER].)
Adjusts the level to memorize for each source. (Before
MID LEVEL
TRE LEVEL
EQ PRO (for
–8 to +8 (+5) making an adjustment, select the source you want to
adjust.)
–8 to +8 (0)
KDC-X598
)
THROUGH: All signals are sent to the speakers. ; 100HZ 120HZ/
/
150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/
150 Hz are sent to the speakers.
BASS ADJUST BASS CTR FRQ 60
BASS LEVEL –8 to +8
BASS Q FACTOR 1.00 1.25
BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.
/
80
/
100
+6): Adjusts the level.
1.50 2.00: Adjusts the quality factor.
/
200HZ: Selects the center frequency.
(
FADER
R15 to F15
(
0
): Adjusts the rear and front speaker output balance.
): Adjusts the left and right speaker output balance.
/
/
/
BALANCE
L15 to R15
(
0
VOLUME OFFSET –8 to +8 (for AUX) ; –8 to (for other sources): Presets the volume
0
MID ADJUST MID CTR FRQ
MID LEVEL
0.5
/
1.0
/
1.5
/
2.5KHZ: Selects the center frequency.
(Default:
0)
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
–8 to +8
(
+5): Adjusts the level.
SOUND RECNSTR ON: Creates realistic sound by compensating the high-frequency
MID Q FACTOR 0.75
/
1.00
12.5
/
/
1.25: Adjusts the quality factor.
15.0 17.5KHZ: Selects the center frequency.
): Adjusts the level.
(Sound
reconstruction)
components and restoring the rise-time of the waveform that are lost
in audio data compression. ; OFF: Cancels.
TRE ADJUST TRE CTR FRQ
TRE LEVEL
10.0
/
/
–8 to +8
(
0
[SUB-W LEVEL]
[SUBWOOFER SET] is set to [ON]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE] is selectable only if
ENGLISH |
.
17
DISPLAY SETTINGS
MORE INFORMATION
General
• This unit can only play the following CDs:
1
Press the volume knob to enter [FUNCTION]
Turn the volume knob to select [DISPLAY], then
press the knob.
.
About KENWOOD Music Editor Light
and KENWOOD Music Control
• This unit supports the PC application KENWOOD Music
Editor Light and Android™ application KENWOOD Music
Control.
• When you play audio files with song data added using
the KENWOOD Music Editor Light or KENWOOD Music
Control, you can search for audio files by Genres, Artists,
Albums, Playlists, and Songs.
2
3
Turn the volume knob to make a selection
(see the following table), then press the knob.
Repeat step 3 until the desired item is selected
or activated.
• Detailed information and notes about the playable audio
files are stated in an online manual on the following web
4
Press and hold
to exit.
To return to the previous setting item or hierarchy,
press
Playable files
• KENWOOD Music Editor Light and KENWOOD Music
Control are available on the following web site:
.
• Playable audio file: MP3 (.mp3), WMA (.wma)
• Playable disc media: CD-R/CD-RW/CD-ROM
• Playable disc file format: ISO 9660 Level 1/2, Joliet, Long
file name.
Default: XX
COLOR SELECT VARIABLE SCAN
/
COLOR 01
—
COLOR 24
/
About iPod/iPhone
Made for
- iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
- iPod classic
- iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
- iPhone, iPhone 3G, 3GS, 4, 4S, 5
• For the latest compatible list and software versions of
• You cannot operate iPod if “KENWOOD” or “ ” is
displayed on iPod.
USER: Selects your preferred key and display
illumination color.
• Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed
above, playback may be impossible depending on the types
or conditions of media or device.
You can create your own color (when
[COLOR 01]
selected). The color you have created can be
selected when you select [USER]
—
[COLOR 24] or [USER] is
Unplayable discs
• Discs that are not round.
• Discs with coloring on the recording surface or discs that
are dirty.
• Recordable/ReWritable discs that have not been
finalized.
.
1
2
3
Press and hold the volume knob to enter
the detailed color adjustment.
Press S / T to select the color (
R
/
G/
B) to adjust.
About Pandora
• Pandora is available only in the U.S., Australia and New
Zealand.
Turn the volume knob to adjust the level
), then press the knob.
• 8 cm CD. Attempting to insert using an adapter may
cause malfunction.
(
0
—
9
• Because Pandora is a third-party service, the
specifications are subject to change without prior notice.
Accordingly, compatibility may be impaired, or some or
all of the services may become unavailable.
• Some functions of Pandora cannot be operated from this
unit.
DIMMER
ON: Dims the display and button illumination. ;
OFF: Illuminates according to the
[BRIGHTNESS] settings.
About USB devices
• This unit can play MP3/WMA/WAV files stored on a USB
mass storage class device.
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5 m
may result in abnormal playback.
• This unit cannot recognize a USB device whose rating is
other than 5 V and exceeds 1 A.
BRIGHTNESS
0
—
31: Selects your preferred brightness level
for display and button illumination.
• For issues using the application, please contact Pandora
TEXT SCROLL AUTO ONCE: Selects whether to scroll the
/
display information automatically, or scroll only
once. ; OFF: Cancels.
18
MORE INFORMATION TROUBLESHOOTING
About iHeartRadio
Symptom
Remedy
• iHeartRadio® is a third-party service, therefore the specifications are subject to change
without prior notice. Accordingly, compatibility may be impaired or some or all of the
services may become unavailable.
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
• Some iHeartRadio® functionality cannot be operated from this unit.
“PROTECT” appears and no
operations can be done.
Check to be sure the terminals of the speaker wires are
insulated properly, then reset the unit. If this does not
solve the problem, consult your nearest service center.
About Bluetooth
• Depending on the Bluetooth version of the device, some Bluetooth devices may not be able
to connect to this unit.
• This unit may not work with some Bluetooth devices.
• Signal conditions vary, depending on the surroundings.
• For more information about Bluetooth, visit the following website:
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
Clean the connectors.
(
2)
The unit does not work at all.
Reset the unit.
(
3)
KMR-D558BT
Make sure [OFF] is selected for [DEMO MODE]
.
(
4)
For
:
The Auto Power Off function
(that turns the power off after
20 minutes when in standby
mode) does not work.
• Radio reception is poor.
• Static noise while listening to
the radio.
• Connect the antenna firmly.
• Pull the antenna out all the way.
“NA FILE” appears.
Make sure the disc contains supported audio files.
18)
(
“NO DISC” appears.
Insert a playable disc into the loading slot.
“TOC ERROR” appears.
“PLEASE EJECT” appears.
Make sure the disc is clean and inserted properly.
Reset the unit. If this does not solve the problem,
consult your nearest service center.
Disc cannot be ejected.
Press and hold
not to drop the disc when it is ejected. If this does not
solve the problem, reset the unit. 3)
M
to forcibly eject the disc. Be careful
(
19
ENGLISH |
TROUBLESHOOTING
Symptom
“READ ERROR” appears.
Remedy
Symptom
“CONNECT ERROR”
Remedy
Copy the files and folders onto the USB device again. If this
does not solve the problem, reset the USB device or use
another USB device.
Communication is unstable.
Registration of thumbs up/thumbs down has failed.
“RATING ERROR”
“LICENSE ERROR”
You try to access from a country which Pandora is not
deliverable.
“NO DEVICE” appears.
“COPY PRO” appears.
“NA DEVICE” appears.
“NO MUSIC” appears.
“iPod ERROR” appears.
Connect a USB device, and change the source to USB again.
A copy-protected file is played.
Station cannot be
selected.
If “Explicit Content” in [Account Settings] is checked in
the web version of iHeartRADIO, custom stations become
unavailable.
Connect a supported USB device, and check the connections.
Connect a USB device that contains playable audio files.
• Reconnect the iPod.
• Reset the iPod.
“CANNOT CREATE”
“CANNOT SAVE”
“DISCONNECTED”
“NO SKIPS”
Custom station name creation is unsuccessful.
Addition to the favorite category failed.
Check the connection to the device.
The skip limit has been reached. Retry later.
No stations are found.
Noise is generated.
Skip to another track or change the disc.
Tracks do not play back as
you intended them to play.
Playback order is determined when files are recorded.
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
This is caused by how the tracks are recorded.
“NO STATIONS”
“NOT CONNECTED”
“IHEARTLINK UP”
Elapsed playing time is not
correct.
Link to the application is impossible.
Make sure you have installed the latest version of the iHeart
Link for KENWOOD application on your device.
Correct characters are not
displayed (e.g. album name). limited number of symbols.
This unit can only display uppercase letters, numbers, and a
“PLEASE LOGIN”
You haven’t log in. Log in again.
Broadcast from the station is over.
“ADD ERROR”
“SEARCH ERROR”
New station creation is unsuccessful.
“STATION NOT
AVAILABLE”
“CHECK DEVICE”
“NO SKIPS”
Check the Pandora application on your device.
The skip limit has been reached.
No stations are found.
“STATION NOT
SELECTED”
No station is selected.
“NO STATIONS”
“STATION LIMIT”
“STREAM ERROR”
“THUMB FAILED”
“TIMED OUT”
Broadcast data is interrupted.
The number of registered stations has reached its limit. Retry
after deleting unnecessary stations from your device.
Registration of Thumbs Up/Down has failed.
The request has resulted in time-out.
“UPGRADE APP”
Make sure you have installed the latest version of the
Pandora application on your device.
20
TROUBLESHOOTING
Symptom
Remedy
Symptom
“CH LOCKED”
Remedy
The selected channel is locked. Enter the correct pass code
• Voice calling method is • Use voice calling method in a more quiet environment.
to unlock.
(
11)
not successful.
• “N/A VOICE TAG”
appears.
• Reduce the distance from the microphone when you
speak the name.
• Make sure the same voice as the registered voice tag is
used.
“CHAN UNSUB”
The selected channel is unsubscribed.
Call 1-866-635-2349 or 1-877-438-9677 to subscribe.
“CH UNAVAIL”
The selected channel is unavailable.
“NOT SUPPORT”
appears.
The connected phone does not support Voice
Recognition feature.
“CHECK ANTENNA”
Check the antenna and its connection are in good
condition.
• “NO ENTRY” appears.
• “NO PAIR” appears.
There is no registered device connected/found via
Bluetooth.
“CHECK TUNER”
“NO SIGNAL”
Make sure the SiriusXM Vehicle Tuner is connected to the
unit.
“ERROR” appears.
Try the operation again. If “ERROR” appears again, check
if the device supports the function you have tried.
Make sure the antenna is mounted outside the vehicle.
“SUBSCRIPTION
UPDATED – PRESS
ENTER TO CONTINUE.”
Your subscription is updated. Press the volume knob to
continue.
“NO INFO” appears.
Bluetooth device cannot get the contact information.
Sound is being
interrupted or skipped
during playback of a
• Reduce the distance between the unit and the Bluetooth
audio player.
• Turn off, then turn on the unit and try to connect again.
“WRONG CODE”
Make sure you have entered the correct pass code.
(
11)
Bluetooth audio player. • Other Bluetooth devices might be trying to connect to
the unit.
No Bluetooth device is • Search from the Bluetooth device again.
detected.
• Reset the unit.
(
3)
The connected
Bluetooth audio player
cannot be controlled.
• Check whether the connected Bluetooth audio player
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
Pairing cannot be
made.
• Make sure you have entered the same PIN code to both the
unit and Bluetooth device.
• Delete pairing information from both the unit and the
• Disconnect and connect the Bluetooth player again.
Bluetooth device, then perform pairing again.
(
12)
• “HF ERROR XX”
appears.
• “BT ERROR” appears.
Reset the unit and try the operation again. If this does
not solve the problem, consult your nearest service
center.
“DEVICE FULL” appears.
Echo or noise occurs.
The number of registered devices has reached its limit.
Retry after deleting an unnecessary device.
(
15,
DEVICE DELETE)
• Adjust the microphone unit’s position.
• Check the [ECHO CANCEL] setting.
(
12)
(
13)
Phone sound quality
is poor.
• Reduce the distance between the unit and the Bluetooth
device.
• Move the car to a place where you can get a better signal
reception.
21
ENGLISH |
Warning
Installing the unit (in-dash mounting)
• The unit can only be used with a 12 V DC power supply, negative
ground.
• Disconnect the battery’s negative terminal before wiring and
mounting.
• Do not connect Battery wire (yellow) and Ignition wire (red) to the
car chassis or Ground wire (black) to prevent a short circuit.
• Insulate unconnected wires with vinyl tape to prevent a short circuit.
• Be sure to ground this unit to the car’s chassis again after
installation.
Do the required wiring.
23)
(
Hook on the top side
Caution
• For safety’s sake, leave wiring and mounting to professionals.
Consult the car audio dealer.
Dashboard of
your car
Orientate the trim plate as
illustrated before fitting.
• Install this unit in the console of your vehicle. Do not touch the metal
parts of this unit during and shortly after use of the unit. Metal parts
such as the heat sink and enclosure become hot.
• Do not connect the
[
wires of speakers to the car chassis or Ground
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
wire (black), or connect them in parallel.
Mount the unit at an angle of less than 30º.
•
• If your vehicle wiring harness does not have the ignition terminal,
connect Ignition wire (red) to the terminal on the vehicle’s fuse box
which provides 12 V DC power supply and is turned on and off by the
ignition key.
• After the unit is installed, check whether the brake lamps, blinkers,
wipers, etc. on the car are working properly.
When installing without the mounting sleeve
1
Remove the mounting sleeve and trim plate from
the unit.
2
Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with
screws (commercially available).
• If the fuse blows, first make sure the wires are not touching car’s
chassis, then replace the old fuse with one that has the same rating.
Use only the specified screws. Using wrong screws might damage the unit.
Basic procedure
How to remove the unit
1
2
3
Remove the key from the ignition switch, then
disconnect the [ terminal of the car battery.
Connect the wires properly.
1
2
Detach the faceplate.
Fit the catch pin on the extraction keys
into the holes on both sides of the trim
plate, then pull it out.
See Wiring connection.
(
23)
Install the unit to your car.
3
Insert the extraction keys deeply into the
slots on each side, then follow the arrows
as shown on the right.
See Installing the unit (in-dash mounting).
Connect the [ terminal of the car battery.
4
5
Reset the unit.
(
3)
22
Wiring connection
Rear/ front/ subwoofer output
Part list for installation
(A) Faceplate
MIC (Microphone input terminal)
(
12)
Antenna terminal
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) 10)
(
(B) Trim plate
If no connections are made, do not let the wire
come out from the tab.
White
To front speaker (left)
To front speaker (right)
To rear speaker (left)
White/Black
Light blue/yellow
To the steering wheel remote control
adapter
Gray
(Steering remote
control wire)
Gray/Black
(C) Mounting sleeve
Green
Green/Black
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
Blue/White
(Power control wire)
Purple
To rear speaker (right)
Ignition switch
Purple/Black
(D) Wiring harness
Brown
To connect the Kenwood navigation system,
refer your navigations manual.
Car fuse box
(Mute control wire)
Red
(Ignition wire)
(E) Extraction key
Yellow
Blue
(Not used)
Car fuse box
(Battery wire)
(Antenna control
wire)
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
23
ENGLISH |
SPECIFICATIONS
FM Frequency Range
87.9 MHz — 107.9 MHz (200 kHz space)
8.2 dBf (0.71 μV/75 Ω)
USB Standard
File System
USB 1.1, USB 2.0 (Full speed)
FAT12/ 16/ 32
Usable Sensitivity (S/N = 26 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
17.2 dBf (2.0 μV/75 Ω)
Maximum Supply Current
MP3 Decode
DC 5 V 1 A
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
Linear-PCM
Frequency Response ( 3 dB)
Signal-to-Noise Ratio (MONO)
Stereo Separation (1 kHz)
30 Hz — 15 kHz
WMA Decode
64 dB
WAV Decode
40 dB
Version
Bluetooth Ver.2.1+EDR Certified
2.402 GHz — 2.480 GHz
AM Frequency Range
530 kHz — 1 700 kHz (10 kHz space)
29 dBμ (28.2 μV)
Frequency Range
Output Power
Usable Sensitivity (S/N = 20 dB)
+4 dBm (MAX), 0 dBm (AVE) Power Class 2
Laser Diode
GaAIAs
Maximum Communication Range Line of sight approx. 10 m (32.8 ft)
Digital Filter (D/A)
8 times over sampling
500 rpm — 200 rpm (CLV)
Below measurable limit
20 Hz — 20 kHz
0.01 %
Profile
HFP (Hands-Free Profile)
SPP (Serial Port Profile)
PBAP (Phonebook Access Profile)
OPP (Object Push Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
Spindle Speed
Wow & Flutter
Frequency Response ( 1 dB)
Total Harmonic Distortion (1 kHz)
Signal-to-Noise Ratio (1 kHz)
Maximum Output Power
Full Bandwidth Power
Speaker Impedance
Tone Action
50 W × 4
22 W × 4 (at less than 1 % THD)
4 Ω — 8 Ω
KDC-X598 : 110 dB
Other models: 105 dB
Dynamic Range
Channel Separation
MP3 Decode
90 dB
Bass
Middle
Treble
200 Hz 8 dB
2.5 kHz 8 dB
12.5 kHz 8 dB
85 dB
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
Preout Level/Load (CD)
Preout Impedance
KDC-X598 : 4 000 mV/10 kΩ
Other models: 2 500 mV/10 kΩ
≤ 600 Ω
WMA Decode
24
SPECIFICATIONS
CAUTION
Frequency Response ( 3 dB)
Input Maximum Voltage
Input Impedance
20 Hz — 20 kHz
1 200 mV
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C
to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very
low levels of RF energy that it deemed to comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it should be installed and operated keeping the
radiator at least 20cm or more away from person’s body (excluding extremities: hands,
wrists, feet and ankles). Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
30 kΩ
Operating Voltage
14.4 V (10.5 V — 16 V allowable)
Maximum Current Consumption
Operational Temperature Range
Installation Size (W × H × D)
10 A
0°C — +40°C
182 mm × 53 mm × 159 mm
(7-3/16" × 2-1/8" × 6-1/4")
Weight
1.2 kg (2.65 lbs)
ATTENTION
Subject to change without notice.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées
pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui
est considérée conforme sans évaluation de l’exposition maximale autorisée. Cependant,
cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre
le dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, pieds et
chevilles). Conformément à la réglementation d’Industrie Canada, le présent émetteur radio
peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé
pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son
gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l’intensité nécessaire à l’établissement d’une communication satisfaisante.
IC (Industry Canada) Notice
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
The term “IC: ” before the certification/ registration number only signifies that the Industry
Canada technical specification were met.
Note de IC (Industrie Canada)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence.
• Contains Bluetooth ModuleFCC ID: XQN-BTR60X
• Contains Bluetooth ModuleIC: 9688A-BTR601
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
Para cumplimiento de la COFETEL:
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
L’expression “IC:” avant le numéro d’homologation/ enregistrement signifie seulement
que les specifications techniques d’Industrie Canada ont été respectées.
“La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada”
25
ENGLISH |
CAUTION
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect
wireless performance.
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
In compliance with Federal Regulations, following are reproductions of
labels on, or inside the product relating to laser product safety.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S.
and other countries.
• Lightning is a trademark of Apple Inc.
• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission.
• iHeartRadio® is a registered mark of Clear Channel Broadcasting, Inc. in the United States and other
countries. Such marks are used under license.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR
SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
• Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved.
• Android is trademark of Google Inc.
Location : Top Plate
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those
of their respective owners.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless
the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil
(aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos)
Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser
desechados como residuos domésticos. Los equipos eléctricos y electrónicos al final de la
vida útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento adecuado a
estos productos y a sus subproductos residuales correspondientes. Póngase en contacto con
su administración local para obtener información sobre el punto de recogida más cercano.
Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los
recursos y evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.
FCC NOTE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment may cause harmful interference
to radio communications, if it is not installed and used in accordance with
the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—special handling
Informação sobre a eliminação de pilhas
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada ao revendedor ou
entidade autorizada para que a mesma seja devolvida ao fabricante ou importador.
A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar os recursos naturais ao mesmo
tempo que prevenirão os efeitos prejudicais à nossa saúde e ao meio ambiente.
• Consult the dealer or an experienced radio/TV technician for help.
|