KDC-X498
KDC-HD458U
CIND-SRETCERIVUERCTION MANUAL
AMMOPLID-TUENDER’LEECMTEPURLDOEICD
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures
will help you obtain the best performance from your new
CD-receiver.
For your records
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever
you call upon your Kenwood dealer for information or service on
the product.
Model KDC-X498/ KDC-HD458U Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2013 JVC KENWOOD Corporation
GET0970-001A (KW/K0)
BASICS
Faceplate
Remote control (RC-406)
Volume knob
(turn/press)
Display window
Remote sensor (Do not expose
to bright sunlight.)
Pull out the
insulation sheet
when using for the
first time.
* Not used.
Detach button
Attach
Detach
How to reset
How to replace the battery
Your preset
adjustments will also
be erased.
To
Do this (on the faceplate)
Do this (on the remote control)
Turn on the power
Press and hold SRC to turn off the power.
Press BSRC.
• Press and hold to turn off the power.
Turn the volume knob.
( Pressing SRC does not turn on the power. )
Adjust the volume
Press VOL
or VOL
.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source
Press SRC repeatedly.
Press BSRC repeatedly.
Change the display
information
Press DISP SCRL repeatedly.
• Press and hold to scroll the current display information.
( not available )
3
ENGLISH |
GETTING STARTED
3
Set the initial settings
1
2
3
Press BSRC to enter STANDBY.
Press the volume knob to enter [FUNCTION]
.
Turn the volume knob to make a selection (see the following table), then press
the knob.
4
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
1
Cancel the demonstration
Default: XX
When you turn on the power (or after you reset the
unit), the display shows: “CANCEL DEMO” “PRESS”
“VOLUME KNOB”
AUDIO CONTROL
SP SELECT
OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches,
6×9 inches or 6 inches) or OEM speakers for optimum performance.
1
Press the volume knob.
DISPLAY
[YES] is selected for the initial setup.
Press the volume knob again.
“DEMO OFF” appears.
EASY MENU
ON: Both display and button illumination change to white color when entering
[FUNCTION]. ; OFF: Both display and button illumination remain as [COLOR SELECT]
2
color.
(
12)
TUNER SETTING
PRESET TYPE
2
Set the clock
NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/
AM). ; MIX: Memorizes one station for each preset button, regardless of the selected band.
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [CLOCK], then press the
SYSTEM
knob.
KEY BEEP
ON: Activates the keypress tone. ; OFF: Deactivates.
3
4
Turn the volume knob to select [CLOCK ADJUST], then
press the knob.
SOURCE SELECT
Turn the volume knob to make the settings, then press
the knob.
Day Hour Minute
Turn the volume knob to select [CLOCK FORMAT], then
press the knob.
Turn the volume knob to select [12H] or [24H], then press
the knob.
Press and hold
PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables.
IHEART SRC ON: Enables IHEARTRADIO in source selection. ; OFF: Disables.
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. 9)
: Automatically distinguishes between audio file disc and music CD. ;
an music CD. No sound can be heard if an audio file disc is played.
(
9)
(
10)
(
5
6
7
CD READ
1
2: Forces to play as
F/W UPDATE
to exit.
UPDATE SYSTEM
To return to the previous setting item or hierarchy, press
.
F/W UP
xx.xx
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
4
HD Radio™ tuner
You can tune in to both conventional and HD Radio broadcasts.
• To find HD Radio stations in your area, visit
<http://www.hdradio.com>.
Direct Access Tuning (using RC-406)
1
2
3
Press DIRECT to enter Direct Access Tuning.
Press the number buttons to enter a frequency or channel.
Press ENT IW to search for a station or channel.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
Other settings
1
2
Press the volume knob to enter [FUNCTION].
Search for a station or channel
Turn the volume knob to make a selection (see the following table), then
press the knob.
1
2
Press BSRC to select HD RADIO.
Press J BAND repeatedly (or press AM– / #FM+ on RC-406)
*
3
Press and hold
to exit.
to select FM1/ FM2/ FM3/ AM.
Press S / T (or press S / T (+) on RC-406) to search for
To return to the previous setting item or hierarchy, press
.
3
Default: XX
a station or channel.
• To change the searching method for S / T: Press K SEEK
repeatedly.
AUTO1: Automatically search for a station or channel.
AUTO2: Search for a preset station or channel.
MANUAL: Manually search for a station or channel.
• To store a station or channel: Press and hold one of the number
buttons (1 to 6).
• To select a stored station or channel: Press one of the number
buttons (1 to 6) (or press one of the number buttons (1 to 6) on
RC-406).
TUNER SETTING
IF BAND
AUTO: Increases the tuner selectivity to reduce interference noises from adjacent
FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises
from adjacent FM stations, but sound quality will not be degraded and the stereo
effect will remain.
AUTO
MEMORY
YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
(Selectable only if [NORMAL] is selected for [PRESET TYPE].)
(
4)
RECEIVE
MODE
Sets the receive mode of the HD Radio receiver.
AUTO : Automatically tunes to analog broadcast when there is no digital
broadcast. ; DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in to
analog broadcast only.
Select an HD Radio multicast channel
TAG MEMORY Displays the shared tag memory usage of the HD Radio receiver.
00 50: Up to 50 tags can be registered to this unit.
CLOCK
Many HD Radio stations offer more than one channel programming.
This service is called multicasting. While receiving HD Radio
multicast channels....
Press S / T to select your desired channel (HD1 to HD8).
“LINKING” appears while linking to a multicast channel.
—
TIME SYNC
ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. ;
OFF: Cancels.
5
ENGLISH |
HD Radio™ tuner
• When the connected iPod/iPhone is not compatible with iTunes
Tag and purchase your favorite songs from iTunes Store
Tagging you cannot transfer the tagged PSDs.
Some HD Radio broadcasts provide Program Service Data (PSD) for songs.
You can tag the song while listening to an HD Radio broadcast and easily
purchase the song from iTunes store.
3
Purchase songs from iTunes Store
This unit memorizes up to 50 tags.
• To check the number of the tag memory used,
1
2
Connect the iPod/iPhone to the PC.
(
B
5).
Synchronize the iPod/iPhone on the iTunes.
• For the best compatibility of iTunes Tagging, use the latest software
versions with the iPod/iPhone that can be connected to this unit.
• iTunes 7.4 or later version is required.
• For details about iPod/iPhone and iTunes, refer also to the instructions
supplied with the iPod/iPhone or visit <http://www.apple.com>.
The tagged PSDs are transferred to the PC and iTunes displays the list
of the tagged songs. After the data transfer is completed, the stored
PSDs are automatically deleted from the iPod/iPhone.
(
12)
1
Tag the song
While receiving a song with PSD (“TAG” lights up)...
Press and hold
.
“TAG STORED” “MEMORY XX/50” appears when the song is stored on
the unit.
• When pressing and holding
within 10 seconds before or after the
PSD changes, the tags for two songs are stored.
2
Transfer the tagged PSD to your iPod/iPhone
Connect the iPod/iPhone to the unit.
The source changes to “USB,” and starts transferring the tagged PSDs to
the iPod/iPhone automatically.
• While transferring, “TAG” flashes and “TAG STORING” appears. When all
the tagged PSDs are transferred, “TAG TRANSFERD” appears.
• Your iPod/iPhone must have 50 MB free space which is required for
transferring a tagged PSD.
• During the transferring process:
– Do not change the source.
– Do not disconnect the iPod/iPhone.
6
CD / USB / iPod
Start playback
The source changes automatically and
playback starts.
CD
Label side
M: Eject disc
To
Do this
Pause or resume
playback
Press 6 IW (or press ENT IW on RC-406).
Select a track/file
Press S / T (or press S / T (+) on RC-406).
USB
USB input terminal
3
*
Select a folder
Press J/ K (or press AM– / #FM+ on RC-406).
*
CA-U1EX (max.: 500 mA)
(optional accessory)
Reverse/
Fast-forward
Press and hold S / T (or press and hold S / T (+) on RC-406).
4
*
Repeat play
Press 4
repeatedly.
• Audio CD: TRACK REPEAT, REPEAT OFF
• MP3/WMA/WAV file or iPod: FILE REPEAT, FOLDER REPEAT, REPEAT OFF
• KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC) file
iPod/iPhone
(
12): FILE REPEAT, REPEAT OFF
USB input terminal
4
*
Random play
Press 3 repeatedly.
• Audio CD: DISC RANDOM, RANDOM OFF
• MP3/WMA/WAV file or iPod or KME Light/ KMC file: FOLDER RANDOM,
RANDOM OFF
5
*
Press and hold 3 to select “ALL RANDOM”.
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone
1
*
*
*
*
*
Do not leave the cable inside the car when not using.
1
*
2
3
4
5
You can still play/pause, file skip, fast-forward or reverse files from the unit.
Only for MP3/WMA/WAV files. This does not work for iPod.
For iPod: Applicable only when [MODE OFF] is selected.
For CD: Only for MP3/WMA files.
Press 5 iPod to select the control mode
while in iPod source.
2
*
MODE ON: From the iPod .
MODE OFF: From the unit.
If you connect the iPod/iPhone to the USB input terminal of the unit (while listening to TuneIn Radio,
TuneIn Radio Pro or Aupeo), the unit will output the sound from these apps.
7
ENGLISH |
CD / USB / iPod
Select a track/file from a list
Direct Music Search (using RC-406)
Set the skip search ratio
While listening to iPod or KME Light/ KMC file...
For iPod: Applicable only when [MODE OFF] is
1
2
Press DIRECT.
selected.
(
7)
Press the number buttons to enter a track/
file number.
1
Press the volume knob to enter [FUNCTION].
1
Press
.
2
Turn the volume knob to select [USB], then
press the knob.
2
Turn the volume knob to make a selection,
then press the knob.
3
Press ENT IW to search for music.
3
4
Turn the volume knob to select
[SKIP SEARCH], then press the knob.
Turn the volume knob to make a selection,
then press the knob.
• To cancel, press
.
• MP3/WMA/WAV file: Select the desired
folder, then a file.
• Not available if Random Play is selected.
• Not applicable for iPod, KME Light/ KMC file.
• iPod or KME Light/ KMC file: Select the
desired file from the list (PLAYLISTS,
0.5% (default)/ 1% 5%/ 10%: Skip search
/
Select a song by name
ratio over the total files.
*
ARTISTS, ALBUMS, SONGS, PODCASTS ,
5
Press and hold
to exit.
*
While listening to iPod...
GENRES, COMPOSERS ).
1
2
Press
.
*
Only for iPod.
Turn the volume knob to select a category,
then press the knob.
Change the USB drive
• To return to the root folder (or first file), press
number button 5 iPod.
When a smartphone (Mass Storage Class) is
connected to the USB input terminal, you can
select its internal memory or external memory
(such as an SD card) to playback the stored songs.
You can also select the desired drive to playback
when a multiple drives device is connected.
Press 5 iPod repeatedly to select the desired
drive.
(or)
3
4
5
Turn the volume knob quickly to enter
character search.
Turn the volume knob to select the
character to be searched for.
Press S / T to move to the entry
position.
• To return to the previous setting item or
hierarchy, press
.
• To cancel, press and hold
.
If you have many files....
You can search through them quickly (on step 2
above) at a preset skip search ratio by pressing
S / T.
You can enter up to 3 characters.
Press the volume knob to start searching.
Turn the volume knob to make a selection,
then press the knob.
6
7
• See also “Set the skip search ratio.”
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [USB], then
press the knob.
• Pressing and holding S / T skip songs at
Repeat step 7 until the desired item is
the maximum ratio (10
%) regardless of the
selected.
setting made.
• To search for a character other than A to Z
3
4
Turn the volume knob to select
[MUSIC DRIVE], then press the knob.
Press the volume knob to select
• For USB: Only for files registered in the
database created with KME Light/ KMC.
• Not applicable for audio CD.
and 0 to 9, enter only “ ”.
*
• To return to the previous hierarchy, press
.
[DRIVE CHANGE]
.
• To return to the top menu, press number
The next drive is selected automatically.
button 5 iPod.
Repeat steps 1 to 4 to select the following
• To cancel, press and hold
.
drives.
Selectable items: [DRIVE 1] to [DRIVE 5]
8
AUX
Pandora®
Preparation:
Preparation:
To
Do this
Select [ON] for [BUILT-IN AUX]
.
(
4)
Install the latest version of the Pandora
application onto your device (iPhone/
iPod touch), then create an account and
log in to Pandora.
Pause or resume
playback
Press 6 IW (or press ENT IW
on RC-406).
Start listening
1
Connect a portable audio player
(commercially available).
Thumbs up or
thumbs down
Press J / K .
• If thumbs down is selected, the
current track is skipped.
• Select [ON] for [PANDORA SRC]
.
(
4)
Auxiliary input jack
Start listening
Skip a track
Press T (or press T (+) on
1
Open the Pandora application on
RC-406).
your device.
2
Connect your device to the USB
input terminal.
Create a new
station
1
2
Press and hold the volume
knob.
Turn the volume knob to
select [FROM TRACK] or [FROM
ARTIST], then press the knob.
A new station is created based
on the current song or artist.
Portable audio
player
3.5 mm (1/8") stereo mini plug with
“L” shaped connector (commercially
available)
USB input terminal
2
3
Press BSRC to select AUX.
Turn on the portable audio player and
start playback.
Save a station
Press and hold one of the
number buttons (1 to 5) to
store.
• To select a stored station, press
one of the number buttons
(1 to 5).
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone
*
Set the AUX name
The source changes to PANDORA and
broadcast starts.
* Do not leave the cable inside the car
when not using.
While listening to a portable audio player
connected to the unit...
1
2
Press the volume knob to enter [FUNCTION].
Search for a
registered
station
1
2
Press
.
Turn the volume knob to select [SYSTEM]
,
Turn the volume knob to
make a selection, then press
the knob (or press J/ K on
RC-406).
then press the knob.
3
4
Turn the volume knob to select [AUX NAME
SET], then press the knob.
Turn the volume knob to make a selection,
then press the knob.
[BY DATE]: According to the
registered date.
[A-Z]: Alphabetical order.
Turn the volume knob to the
desired station, then press the
knob.
AUX (default)/ DVD PORTABLE/ GAME/ VIDEO/ TV
/
5
Press and hold
to exit.
3
9
ENGLISH |
iHeartRadio®
Preparation:
To
Do this
Skip cities by alphabetical order
Install the latest version of iHeart Link for
KENWOOD application onto your device
(iPhone/ iPod touch), then create an account
and log in to iHeartRadio
While a city list appears during search...
Pause or
resume
playback
Press 6 IW (or press
ENT IW on RC-406).
1
2
3
4
Turn the volume knob quickly to enter
character search.
Turn the volume knob or press S / T
to select the character to be searched for.
Press J/ K to move to the previous/next
page.
• Select [ON] for [IHEART SRC]
.
(
4)
Thumbs up or
thumbs down
for custom
station
Press J / K .
• If thumbs down is selected,
the current track is skipped.
Start listening
1
Open the iHeart Link application on
Press the volume knob to start searching.
your device.
Skip a track for
custom station
Press T (or press T (+)
on RC-406).
To cancel, press and hold
.
2
Connect your device to the USB input
terminal.
Create a new/
custom station
Press 1.
Delete a station
USB input terminal
While listening to IHEARTRADIO...
Add to favorite
stations for live
station
Press 2.
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [SYSTEM]
then press the knob.
,
3
4
5
Turn the volume knob to select [STATION
DELETE], then press the knob.
Turn the volume knob to select [LIVE] or
[CUSTOM], then press the knob.
Turn the volume knob to select the
desired station to delete, then press the
knob.
Turn the volume knob to select [YES], then
Scan for live
station
Press 5.
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone
*
3
Press BSRC to select IHEARTRADIO.
Broadcast starts automatically.
Search for a station
Press
1
2
.
Turn the volume knob to select a category,
then press the knob.
* Do not leave the cable inside the car when
not using.
6
7
press the knob.
Press and hold
3
Turn the volume knob to the desired station,
then press the knob.
to exit.
To return to the previous setting item or
hierarchy, press
When a city list appears, you can skip cities in
alphabetical order.
.
(or using RC-406)
Press J/ K to search for a station.
To cancel, press and hold
.
10
AUDIO SETTINGS
While listening to any source...
PRESET EQ
DRIVE EQ
NATURAL
/
/
TOP40
/
POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/
1
2
3
Press the volume knob to enter [FUNCTION].
USER: Selects a preset equalizer suitable to the music
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
Turn the volume knob to make a selection (see the following table),
then press the knob.
genre. (Select [USER] to use the customized bass, middle, and treble
settings.)
[DRIVE EQ] is a preset equalizer that reduces noise from the road.
Repeat step 3 until the desired item is selected or activated.
BASS BOOST
LOUDNESS
LEVEL1
/
LEVEL2/ LEVEL3: Selects your preferred bass boost level. ;
4
Press and hold
to exit.
OFF: Cancels.
(or using RC-406)
1 Press AUD to enter [AUDIO CONTROL]
2 Press J/ K to make a selection, then press ENT IW.
LEVEL1 LEVEL2: Selects your preferred low and high frequencies
/
.
boost to produce a well-balanced sound at a low volume level. ;
OFF: Cancels.
To return to the previous setting item or hierarchy, press
.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ; 85HZ 120HZ/
/
Default: XX
160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/
SUB-W LEVEL –15 to +15 (0) Adjusts the subwoofer output level.
160 Hz are sent to the subwoofer.
BASS LEVEL –8 to +8 (+6)
SUB-W PHASE
HPF
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[LPF SUBWOOFER].)
Adjusts the level to memorize for each source. (Before
MID LEVEL
TRE LEVEL
–8 to +8 (+5) making an adjustment, select the source you want to
adjust.)
–8 to +8 (0)
EQ PRO (for KDC-X498
)
THROUGH: All signals are sent to the speakers. ; 100HZ 120HZ/
/
150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/
150 Hz are sent to the speakers.
BASS ADJUST BASS CTR FRQ 60
BASS LEVEL –8 to +8
BASS Q FACTOR 1.00 1.25
BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.
/
80
/
100
+6): Adjusts the level.
1.50 2.00: Adjusts the quality factor.
/
200HZ: Selects the center frequency.
(
FADER
R15 to F15
(
0
): Adjusts the rear and front speaker output balance.
): Adjusts the left and right speaker output balance.
/
/
/
BALANCE
L15 to R15
(
0
VOLUME OFFSET –8 to +8 (for AUX) ; –8 to (for other sources): Presets the volume
0
MID ADJUST MID CTR FRQ
MID LEVEL
0.5
/
1.0
/
1.5
/
2.5KHZ: Selects the center frequency.
(Default:
0)
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
–8 to +8
(
+5): Adjusts the level.
MID Q FACTOR 0.75
/
1.00
12.5
/
/
1.25: Adjusts the quality factor.
15.0 17.5KHZ: Selects the center frequency.
): Adjusts the level.
SOUND RECNSTR ON: Creates realistic sound by compensating the high-frequency
(Sound
reconstruction)
components and restoring the rise-time of the waveform that are lost
in audio data compression. ; OFF: Cancels.
TRE ADJUST TRE CTR FRQ
TRE LEVEL
10.0
/
/
–8 to +8
(
0
[SUB-W LEVEL]
[SUBWOOFER SET] is set to [ON]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE] is selectable only if
ENGLISH |
.
11
DISPLAY SETTINGS
MORE INFORMATION
General
• This unit can only play the following CDs:
1
Press the volume knob to enter [FUNCTION]
Turn the volume knob to select [DISPLAY], then
press the knob.
.
About KENWOOD Music Editor Light
and KENWOOD Music Control
• This unit supports the PC application KENWOOD Music
Editor Light and Android™ application KENWOOD Music
Control.
• When you play audio files with song data added using
the KENWOOD Music Editor Light or KENWOOD Music
Control, you can search for audio files by Genres, Artists,
Albums, Playlists, and Songs.
2
3
Turn the volume knob to make a selection
(see the following table), then press the knob.
Repeat step 3 until the desired item is selected
or activated.
• Detailed information and notes about the playable audio
files are stated in an online manual on the following web
4
Press and hold
to exit.
To return to the previous setting item or hierarchy,
press
Playable files
• KENWOOD Music Editor Light and KENWOOD Music
Control are available on the following web site:
.
• Playable audio file: MP3 (.mp3), WMA (.wma)
• Playable disc media: CD-R/CD-RW/CD-ROM
• Playable disc file format: ISO 9660 Level 1/2, Joliet, Long
file name.
Default: XX
COLOR SELECT VARIABLE SCAN
/
COLOR 01
—
COLOR 24
/
About iPod/iPhone
Made for
- iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
- iPod classic
- iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
- iPhone, iPhone 3G, 3GS, 4, 4S, 5
• For the latest compatible list and software versions of
• You cannot operate iPod if “KENWOOD” or “ ” is
displayed on iPod.
USER: Selects your preferred key illumination
color.
• Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed
above, playback may be impossible depending on the types
or conditions of media or device.
You can create your own color (when
[COLOR 01]
selected). The color you have created can be
selected when you select [USER]
—
[COLOR 24] or [USER] is
Unplayable discs
• Discs that are not round.
• Discs with coloring on the recording surface or discs that
are dirty.
• Recordable/ReWritable discs that have not been
finalized.
.
1
2
3
Press and hold the volume knob to enter
the detailed color adjustment.
Press S / T to select the color (
R
/
G/
B) to adjust.
Turn the volume knob to adjust the level
), then press the knob.
• 8 cm CD. Attempting to insert using an adapter may
cause malfunction.
(
0
—
9
DIMMER
ON: Dims the display and button illumination. ;
OFF: Illuminates according to the
[BRIGHTNESS] settings.
About USB devices
• This unit can play MP3/WMA/WAV files stored on a USB
mass storage class device.
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5 m
may result in abnormal playback.
• This unit cannot recognize a USB device whose rating is
other than 5 V and exceeds 1 A.
BRIGHTNESS
0
—
31: Selects your preferred brightness
level for display and button illumination.
TEXT SCROLL AUTO ONCE: Selects whether to scroll the
/
display information automatically, or scroll
only once. ; OFF: Cancels.
12
MORE INFORMATION
TROUBLESHOOTING
About HD Radio™ Technology
Symptom
Remedy
• Program Service Data provides song
name, artist, station ID, and other
relevant data streams.
• Adjacent to traditional main stations
are HD2/HD3 Channels, providing new
original formats on the FM dial.
• HD Radio broadcasts deliver crystal
clear, CD-like digital audio quality to
consumers.
• iTunes® Tagging provides users the
means to “tag” broadcast radio content
for later review and purchase from the
iTunes® Store.
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
“PROTECT” appears and no operations
can be done.
Check to be sure the terminals of the speaker wires are insulated properly, then
reset the unit. If this does not solve the problem, consult your nearest service
center.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the display is
incorrect.
Clean the connectors.
(
2)
The unit does not work at all.
• Radio reception is poor.
Reset the unit.
(
3)
• Connect the antenna firmly.
• Static noise while listening to the radio. • Pull the antenna out all the way.
About Pandora
• Pandora is available only in the U.S., Australia and New
Zealand.
“MEMORY FULL” appears.
“iPod FULL” appears.
“NO TAG FNC” appears.
“TAG ERROR” appears.
“NA FILE” appears.
The tag memory of HD Radio receiver is full.
The connected iPod/iPhone memory is full.
• Because Pandora is a third-party service, the specifications
are subject to change without prior notice. Accordingly,
compatibility may be impaired, or some or all of the
services may become unavailable.
• Some functions of Pandora cannot be operated from this
unit.
The connected iPod does not support iTunes tagging function.
The unit is unable to complete transferring the tagged information to the iPod.
Make sure the disc contains supported audio files.
Insert a playable disc into the loading slot.
(
12)
“NO DISC” appears.
• For issues using the application, please contact Pandora at
“TOC ERROR” appears.
“PLEASE EJECT” appears.
Make sure the disc is clean and inserted properly.
About iHeartRadio
Reset the unit. If this does not solve the problem, consult your nearest service
center.
• iHeartRadio® is a third-party service, therefore the
specifications are subject to change without prior notice.
Accordingly, compatibility may be impaired or some or all
of the services may become unavailable.
• Some iHeartRadio® functionality cannot be operated from
this unit.
Disc cannot be ejected.
“READ ERROR” appears.
“NO DEVICE” appears.
Press and hold
M
to forcibly eject the disc. Be careful not to drop the disc when
3)
it is ejected. If this does not solve the problem, reset the unit.
(
Copy the files and folders onto the USB device again. If this does not solve the
problem, reset the USB device or use another USB device.
Connect a USB device, and change the source to USB again.
13
ENGLISH |
TROUBLESHOOTING
Symptom
Remedy
Symptom
Station cannot be
Remedy
“COPY PRO” appears.
“NA DEVICE” appears.
“NO MUSIC” appears.
“iPod ERROR” appears.
A copy-protected file is played.
If “Explicit Content” in [Account Settings] is checked in
the web version of iHeartRADIO, custom stations become
unavailable.
selected.
Connect a supported USB device, and check the connections.
Connect a USB device that contains playable audio files.
“CANNOT CREATE”
“CANNOT SAVE”
“DISCONNECTED”
“NO SKIPS”
Custom station name creation is unsuccessful.
Addition to the favorite category failed.
Check the connection to the device.
The skip limit has been reached. Retry later.
No stations are found.
• Reconnect the iPod.
• Reset the iPod.
Noise is generated.
Skip to another track or change the disc.
Tracks do not play back as
you intended them to play.
Playback order is determined when files are recorded.
“NO STATIONS”
“NOT CONNECTED”
“IHEARTLINK UP”
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
This is caused by how the tracks are recorded.
Link to the application is impossible.
Elapsed playing time is not
correct.
Make sure you have installed the latest version of the
iHeart Link for KENWOOD application on your device.
Correct characters are not
displayed (e.g. album
name).
This unit can only display uppercase letters, numbers, and a
limited number of symbols.
“PLEASE LOGIN”
You haven’t log in. Log in again.
Broadcast from the station is over.
“STATION NOT
AVAILABLE”
“ADD ERROR”
“SEARCH ERROR”
New station creation is unsuccessful.
“STATION NOT
SELECTED”
No station is selected.
“CHECK DEVICE”
“NO SKIPS”
Check the Pandora application on your device.
The skip limit has been reached.
No stations are found.
“STREAM ERROR”
“THUMB FAILED”
“TIMED OUT”
Broadcast data is interrupted.
Registration of Thumbs Up/Down has failed.
The request has resulted in time-out.
“NO STATIONS”
“STATION LIMIT”
The number of registered stations has reached its limit. Retry
after deleting unnecessary stations from your device.
Muting upon the reception of a phone call
“UPGRADE APP”
Make sure you have installed the latest version of the
Pandora application on your device.
Connect the MUTE wire to your telephone using a commercial
telephone accessory.
(
17)
“CONNECT ERROR”
“RATING ERROR”
“LICENSE ERROR”
Communication is unstable.
When a call comes in, “CALL” appears. (The audio system pauses.)
• To continue listening to the audio system during a call, press BSRC.
“CALL” disappears and the audio system resumes.
Registration of thumbs up/thumbs down has failed.
You try to access from a country which Pandora is not
deliverable.
When the call ends, “CALL” disappears. (The audio system resumes.)
14
SPECIFICATIONS
USB Standard
File System
Maximum Supply Current
MP3 Decode
WMA Decode
WAV Decode
USB 1.1, USB 2.0 (Full speed)
FAT12/ 16/ 32
DC 5 V 1 A
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
Linear-PCM
FM Frequency Range
87.9 MHz — 107.9 MHz (200 kHz space)
9.3 dBf (0.8 μV/75 Ω)
Usable Sensitivity (S/N = 26 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
10.2 dBf (1.13 μV/75 Ω)
Frequency Response ( 3 dB)
20 Hz — 20 kHz (HD Radio broadcast)
30 Hz — 15 kHz (Conventional broadcast)
Maximum Output Power
Full Bandwidth Power
Speaker Impedance
Tone Action
50 W × 4
22 W × 4 (at less than 1 % THD)
4 Ω — 8 Ω
Bass
Middle
Treble
Signal-to-Noise Ratio (MONO)
STEREO 75 dB (HD Radio broadcast)
MONO
75 dB (Conventional broadcast)
Stereo Separation (1 kHz)
AM Frequency Range
45 dB
200 Hz 8 dB
2.5 kHz 8 dB
12.5 kHz 8 dB
530 kHz — 1 700 kHz (10 kHz space)
10 kHz
Channel Space Selection
Usable Sensitivity (S/N = 20 dB)
Frequency Response ( 3 dB)
Signal-to-Noise Ratio
28 dBμ (25 μV)
Preout Level/Load (CD)
Preout Impedance
KDC-X498
KDC-HD458U
: 4 000 mV/10 kΩ
40 Hz — 15 kHz (HD Radio broadcast)
STEREO 70 dB (HD Radio broadcast)
: 2 500 mV/10 kΩ
≤ 600 Ω
Frequency Response ( 3 dB)
Input Maximum Voltage
Input Impedance
20 Hz — 20 kHz
1 200 mV
Laser Diode
GaAIAs
Digital Filter (D/A)
8 times over sampling
500 rpm — 200 rpm (CLV)
Below measurable limit
20 Hz — 20 kHz
0.01 %
30 kΩ
Spindle Speed
Operating Voltage
14.4 V (10.5 V — 16 V allowable)
10 A
0°C — +40°C
182 mm × 53 mm × 159 mm
(7-3/16" × 2-1/8" × 6-1/4")
1.2 kg (2.65 lbs)
Wow & Flutter
Maximum Current Consumption
Operational Temperature Range
Installation Size (W × H × D)
Frequency Response ( 1 dB)
Total Harmonic Distortion (1 kHz)
Signal-to-Noise Ratio (1 kHz)
KDC-X498
: 110 dB
KDC-HD458U
: 105 dB
Weight
Dynamic Range
Channel Seperation
MP3 Decode
90 dB
Subject to change without notice.
85 dB
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
WMA Decode
15
ENGLISH |
Warning
Installing the unit (in-dash mounting)
• The unit can only be used with a 12 V DC power supply, negative
ground.
• Disconnect the battery’s negative terminal before wiring and
mounting.
• Do not connect Battery wire (yellow) and Ignition wire (red) to the
car chassis or Ground wire (black) to prevent a short circuit.
• Insulate unconnected wires with vinyl tape to prevent a short circuit.
• Be sure to ground this unit to the car’s chassis again after
installation.
Do the required wiring.
17)
(
Hook on the top side
Caution
• For safety’s sake, leave wiring and mounting to professionals.
Consult the car audio dealer.
Dashboard of
your car
Orientate the trim plate as
illustrated before fitting.
• Install this unit in the console of your vehicle. Do not touch the metal
parts of this unit during and shortly after use of the unit. Metal parts
such as the heat sink and enclosure become hot.
• Do not connect the
[
wires of speakers to the car chassis or Ground
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
wire (black), or connect them in parallel.
Mount the unit at an angle of less than 30º.
•
• If your vehicle wiring harness does not have the ignition terminal,
connect Ignition wire (red) to the terminal on the vehicle’s fuse box
which provides 12 V DC power supply and is turned on and off by the
ignition key.
• After the unit is installed, check whether the brake lamps, blinkers,
wipers, etc. on the car are working properly.
When installing without the mounting sleeve
1
Remove the mounting sleeve and trim plate from
the unit.
2
Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with
screws (commercially available).
• If the fuse blows, first make sure the wires are not touching car’s
chassis, then replace the old fuse with one that has the same rating.
Use only the specified screws. Using wrong screws might damage the unit.
Basic procedure
How to remove the unit
1
2
3
Remove the key from the ignition switch, then
disconnect the [ terminal of the car battery.
Connect the wires properly.
1
2
Detach the faceplate.
Fit the catch pin on the extraction keys
into the holes on both sides of the trim
plate, then pull it out.
See Wiring connection.
(
17)
Install the unit to your car.
3
Insert the extraction keys deeply into the
slots on each side, then follow the arrows
as shown on the right.
See Installing the unit (in-dash mounting).
Connect the [ terminal of the car battery.
4
5
Reset the unit.
(
3)
16
Wiring connection
Rear/ front/ subwoofer output
Part list for installation
(A) Faceplate
Fuse (10 A)
Antenna terminal
(B) Trim plate
If no connections are made, do not let the wire
come out from the tab.
White
To front speaker (left)
To front speaker (right)
To rear speaker (left)
White/Black
Light blue/yellow
To the steering wheel remote control
adapter
Gray
(Steering remote
control wire)
Gray/Black
(C) Mounting sleeve
Green
Green/Black
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
Blue/White
(Power control wire)
Purple
To rear speaker (right)
Ignition switch
Purple/Black
(D) Wiring harness
To the terminal that is grounded when the
telephone rings or during conversation.
(To connect the Kenwood navigation system,
refer your navigations manual.)
Brown
Car fuse box
(Mute control wire)
Red
(Ignition wire)
(E) Extraction key
Blue
Yellow
(Not used)
Car fuse box
(Antenna control
wire)
(Battery wire)
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
17
ENGLISH |
CAUTION
• HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign
Patents. HD Radio™ and the HD, HD Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital
Corp.
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect
wireless performance.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S.
and other countries.
• Lightning is a trademark of Apple Inc.
• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission.
• iHeartRadio® is a registered mark of Clear Channel Broadcasting, Inc. in the United States and other
countries. Such marks are used under license.
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
In compliance with Federal Regulations, following are reproductions of
labels on, or inside the product relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR
SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
Location : Top Plate
FCC WARNING
• Android is trademark of Google Inc.
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless
the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil
(aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos)
Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser
desechados como residuos domésticos. Los equipos eléctricos y electrónicos al final de la
vida útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento adecuado a
estos productos y a sus subproductos residuales correspondientes. Póngase en contacto con
su administración local para obtener información sobre el punto de recogida más cercano.
Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los
recursos y evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.
FCC NOTE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment may cause harmful interference
to radio communications, if it is not installed and used in accordance with
the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—special handling
Informação sobre a eliminação de pilhas
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada ao revendedor ou
entidade autorizada para que a mesma seja devolvida ao fabricante ou importador.
A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar os recursos naturais ao mesmo
tempo que prevenirão os efeitos prejudicais à nossa saúde e ao meio ambiente.
• Consult the dealer or an experienced radio/TV technician for help.
|