KDC-BT358U
KDC-BT318U
CIND-SRETCERIVUERCTION MANUAL
AMMOPLID-TUENDER’LEECMTEPURLDOEICD
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-BT358U/ KDC-BT318U Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2013 JVC KENWOOD Corporation
GET0996-001A (KN)
BASICS
Faceplate
Remote control (RC-406)
Remote sensor (Do
Attach
Detach
Volume knob
(turn/press)
not expose to bright
sunlight.)
Loading slot
Display window
Pull out the insulation sheet
when using for the first time.
How to reset
Detach
button
How to replace the battery
KDC-BT318U
Your preset adjustments
will also be erased.
To
Do this (on the faceplate)
Do this (on the remote control)
Turn on the power
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Press BSRC.
• Press and hold to turn off the power.
Adjust the volume
Turn the volume knob.
Press VOL
or VOL
.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source
Press SRC repeatedly.
Press BSRC repeatedly.
Change the display
Press DISP SCRL repeatedly.
• Press and hold to scroll the current display information.
( not available )
*
information
KDC-BT358U
* For
: You can also select to turn off the display information by pressing DISP SCRL repeatedly.
3
ENGLISH |
GETTING STARTED
3
Set the initial settings
1
2
3
4
Press BSRC to enter STANDBY.
Press the volume knob to enter [FUNCTION]
.
Turn the volume knob to make a selection (see the following table), then press the knob.
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
1
Cancel the demonstration
Default: XX
When you turn on the power (or after you reset the
unit), the display shows: “CANCEL DEMO” “PRESS”
“VOLUME KNOB”
AUDIO CONTROL
SWITCH
PREOUT
REAR
terminals on the rear (through an external amplifier).
OFF 5/4 6 × 9/6 OEM: Selects according to the speaker size (5 inches or 4 inches,
/
SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out
1
Press the volume knob.
SP SELECT
/
/
/
[YES] is selected for the initial setup.
Press the volume knob again.
“DEMO OFF” appears.
6×9 inches or 6 inches) or OEM speakers for optimum performance.
2
DISPLAY
EASY MENU
1
*
ON: Both display and button illumination change to white color when entering [FUNCTION]. ;
2
OFF: Both display and button illumination remain as [COLOR SELECT] color.
(
16)
Set the clock
TUNER SETTING
PRESET TYPE
1
2
3
Press the volume knob to enter [FUNCTION].
NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;
MIX: Memorizes one station for each preset button, regardless of the selected band.
Turn the volume knob to select [CLOCK], then press the knob.
Turn the volume knob to select [CLOCK ADJUST], then press
the knob.
SYSTEM
4
5
6
7
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
Turn the volume knob to select [CLOCK FORMAT], then press
the knob.
KEY BEEP
SOURCE SELECT
PANDORA SRC
IHEART SRC
ON: Activates the keypress tone. ; OFF: Deactivates.
2
*
*
ON: Enables PANDORA in source selection. ; OFF: Disables.
ON: Enables IHEARTRADIO in source selection. ; OFF: Disables.
8)
: Automatically distinguishes between audio file disc and music CD. ;
music CD. No sound can be heard if an audio file disc is played.
(
8)
(
2
9)
Turn the volume knob to select [12H] or [24H], then press
the knob.
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables.
CD READ
(
Press and hold
to exit.
1
2: Forces to play as an
To return to the previous setting item or hierarchy, press
.
F/W UPDATE
UPDATE SYSTEM/ UPDATE BT
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
While in clock display screen...
Press and hold DISP SCRL to enter clock adjustment
mode directly.
Then, perform step 4 to set the clock.
1
2
KDC-BT318U
*
KDC-BT358U
For
, * For
4
RADIO
Other settings
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to make a selection (see the following table), then press
the knob.
3
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
Default: XX
Search for a station
TUNER SETTING
1
2
Press BSRC to select TUNER.
Press J BAND repeatedly (or press AM– / #FM+ on
AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
(Selectable only if [NORMAL] is selected for [PRESET TYPE].) 4)
*
RC-406) to select FM1/ FM2/ FM3/ AM.
Press S / T (or press S / T (+) on RC-406) to
search for a station.
(
3
MONO SET
For KDC-BT358U
TI
ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.
:
• To change the searching method for S / T: Press
K SEEK repeatedly.
AUTO1: Automatically search for a station.
AUTO2: Search for a preset station.
MANUAL: Manually search for a station.
• To store a station: Press and hold one of the number
buttons (1 to 6).
ON: Allows the unit to temporarily switch to Traffic Information. ; OFF: Cancels.
Selects the available Program Type (see below), then, press S / T to start.
PTY SEARCH
CLOCK
TIME SYNC
ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. ;
OFF: Cancels.
• To select a stored station: Press one of the number
buttons (1 to 6) (or press one of the number buttons
(1 to 6) on RC-406).
•
[MONO SET]
/
[TI]
/
[PTY SEARCH] is selectable only when the band is FM1/ FM2/ FM3.
• Available Program Type:
INFORM (information), SPORTS
PERSNLTY (personality), PUBLIC COLLEGE HABL ESP (spanish talk), WEATHER
MUSIC ROCK CLS ROCK (classic rock), ADLT HIT (adult hits), SOFT RCK (softrock), TOP 40
COUNTRY OLDIES SOFT NOSTALGA (nostalgia), JAZZ CLASSICL (classical), R & B (rhythm and
SPEECH
:
NEWS
,
,
TALK, LANGUAGE, REL TALK (religious talk),
,
,
:
,
,
Direct Access Tuning (using RC-406)
,
,
,
,
1
2
3
Press DIRECT to enter Direct Access Tuning.
Press the number buttons to enter a frequency.
Press ENT IW to search for a station.
blues), SOFT R&B (soft rhythm and blues), REL MUSC (religious music), MUSC ESP (spanish
music), HIP HOP
The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if
selected.
• To cancel, press or DIRECT.
KDC-BT358U
• For
: If the volume is adjusted during reception of traffic information or
alarm, the adjusted volume is memorized automatically. It will be applied the next
time traffic information or alarm function is turned on.
• If no operation is done for 10 seconds after step 2, Direct
Access Tuning is automatically canceled.
5
ENGLISH |
CD / USB / iPod
Start playback
The source changes automatically and
playback starts.
CD
Eject disc
Label side
To
Do this
Pause or resume
playback
Press 6 IW (or press ENT IW on RC-406).
Select a track/file
Press S / T (or press S / T (+) on RC-406).
3
*
USB
USB input terminal
Select a folder
Press J / K (or press AM– / #FM+ on RC-406).
*
Reverse/
Fast-forward
Press and hold S / T (or press and hold S / T (+) on RC-406).
CA-U1EX (max.: 500 mA)
(optional accessory)
4
*
Repeat play
Press 4
repeatedly.
• Audio CD: TRACK REPEAT, REPEAT OFF
• MP3/WMA/WAV file or iPod: FILE REPEAT, FOLDER REPEAT, REPEAT OFF
• KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC) file
iPod/iPhone
(
16): FILE REPEAT, REPEAT OFF
USB input terminal
4
*
Random play
Press 3 repeatedly.
• Audio CD: DISC RANDOM, RANDOM OFF
• MP3/WMA/WAV file or iPod or KME Light/ KMC file: FOLDER RANDOM,
RANDOM OFF
5
*
Press and hold 3
to select “ALL RANDOM”.
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone
1
*
*
*
*
*
Do not leave the cable inside the car when not using.
1
*
2
3
4
5
You can still play/pause, file skip, fast-forward or reverse files from the unit.
Only for MP3/WMA/WAV files. This does not work for iPod.
For iPod: Applicable only when [MODE OFF] is selected.
For CD: Only for MP3/WMA files.
Press 5 iPod to select the control mode
while in iPod source.
2
*
MODE ON: From the iPod .
MODE OFF: From the unit.
If you connect the iPod/iPhone to the USB input terminal of the unit (while listening to TuneIn Radio,
TuneIn Radio Pro or Aupeo), the unit will output the sound from these apps.
6
CD / USB / iPod
Select a track/file from a list
Direct Music Search (using RC-406)
Set the skip search ratio
While listening to iPod or KME Light/ KMC file...
For iPod: Applicable only when [MODE OFF] is
1
2
Press DIRECT.
selected.
(
6)
Press the number buttons to enter a track/
file number.
1
Press the volume knob to enter [FUNCTION].
1
Press
.
2
Turn the volume knob to select [USB], then
press the knob.
2
Turn the volume knob to make a selection,
then press the knob.
3
Press ENT IW to search for music.
3
4
Turn the volume knob to select
[SKIP SEARCH], then press the knob.
Turn the volume knob to make a selection,
then press the knob.
• To cancel, press
.
• MP3/WMA/WAV file: Select the desired
folder, then a file.
• Not available if Random Play is selected.
• Not applicable for iPod, KME Light/ KMC file.
• iPod or KME Light/ KMC file: Select the
desired file from the list (PLAYLISTS,
0.5% (default)/ 1%
/
5%/
10%: Skip search ratio
Select a song by name
over the total files.
*
ARTISTS, ALBUMS, SONGS, PODCASTS ,
5
Press and hold
to exit.
*
While listening to iPod...
GENRES, COMPOSERS ).
1
2
Press
.
*
Only for iPod.
Turn the volume knob to select a category,
then press the knob.
Change the USB drive
• To return to the root folder (or first file), press
number button 5 iPod.
When a smartphone (Mass Storage Class) is
connected to the USB input terminal, you can
select its internal memory or external memory
(such as an SD card) to playback the stored songs.
You can also select the desired drive to playback
when a multiple drives device is connected.
Press 5 iPod repeatedly to select the desired
drive.
(or)
3
4
5
Turn the volume knob quickly to enter
character search.
Turn the volume knob to select the
character to be searched for.
Press S / T to move to the entry
position.
• To return to the previous setting item or
hierarchy, press
.
• To cancel, press and hold
.
If you have many files....
You can search through them quickly (on
step 2 above) at a preset skip search ratio by
pressing S / T.
You can enter up to 3 characters.
Press the volume knob to start searching.
Turn the volume knob to make a selection,
then press the knob.
6
7
• See also “Set the skip search ratio.”
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [USB], then
press the knob.
• Pressing and holding S / T skip songs at
Repeat step 7 until the desired item is
the maximum ratio (10
%) regardless of the
selected.
setting made.
3
4
Turn the volume knob to select
[MUSIC DRIVE], then press the knob.
Press the volume knob to select
• To search for a character other than A to Z
• For USB: Only for files registered in the
database created with KME Light/ KMC.
• Not applicable for audio CD.
and 0 to 9, enter only “ ”.
*
• To return to the previous hierarchy, press
[DRIVE CHANGE]
.
.
The next drive is selected automatically.
Repeat steps 1 to to select the following drives.
Selectable items: [DRIVE 1] to [DRIVE 5]
• To return to the top menu, press number
4
button 5 iPod.
• To cancel, press and hold
.
7
ENGLISH |
KDC-BT318U
AUX
Pandora® (for
)
Preparation:
Preparation:
To
Do this
Select [ON] for [BUILT-IN AUX]
.
(
4)
Install the latest version of the Pandora
application onto your device (iPhone/
iPod touch), then create an account and
log in to Pandora.
Pause or resume
playback
Press 6 IW (or press ENT IW
on RC-406).
Start listening
1
Connect a portable audio player
(commercially available).
Thumbs up or
thumbs down
Press J / K .
• If thumbs down is selected, the
current track is skipped.
• Select [ON] for [PANDORA SRC]
.
(
4)
Auxiliary input jack
Start listening
Skip a track
Press T (or press T (+) on
1
Open the Pandora application on
RC-406).
your device.
2
Connect your device to the USB
input terminal.
Create a new
station
1
2
Press and hold the volume
knob.
Turn the volume knob to
select [FROM TRACK] or [FROM
ARTIST], then press the knob.
A new station is created based
on the current song or artist.
Portable audio
player
3.5 mm (1/8") stereo mini plug with
“L” shaped connector (commercially
available)
USB input terminal
2
3
Press BSRC to select AUX.
Turn on the portable audio player and
start playback.
Save a station
Press and hold one of the
number buttons (1 to 5) to
store.
• To select a stored station, press
one of the number buttons
(1 to 5).
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone
*
Set the AUX name
The source changes to PANDORA and
broadcast starts.
While listening to a portable audio player
connected to the unit...
1
2
Press the volume knob to enter [FUNCTION].
Search for a
registered
station
1
2
Press
.
* Do not leave the cable inside the car
when not using.
Turn the volume knob to select [SYSTEM]
,
Turn the volume knob to
make a selection, then press
the knob (or press J / K on
RC-406).
then press the knob.
3
4
Turn the volume knob to select [AUX NAME
SET], then press the knob.
Turn the volume knob to make a selection,
then press the knob.
[BY DATE]: According to the
registered date.
[A-Z]: Alphabetical order.
Turn the volume knob to the
desired station, then press the
knob.
AUX (default)/ DVD PORTABLE/ GAME/ VIDEO/ TV
/
5
Press and hold
to exit.
3
8
KDC-BT318U
iHeartRadio® (for
Preparation:
)
To
Do this
Skip cities by alphabetical order
Install the latest version of iHeart Link for
KENWOOD application onto your device
While a city list appears during search...
Pause or
resume
playback
Press 6 IW (or press
ENT IW on RC-406).
1
2
3
4
Turn the volume knob quickly to enter
character search.
(iPhone/ iPod touch), then create an account
and log in to iHeartRadio.
Turn the volume knob or press S / T
to select the character to be searched for.
Press J / K to move to the previous/next
page.
• Select [ON] for [IHEART SRC]
.
(
4)
Thumbs up or
thumbs down
for custom
station
Press J / K .
• If thumbs down is selected,
the current track is skipped.
Start listening
1
Open the iHeart Link application on
Press the volume knob to start searching.
your device.
Skip a track for
custom station
Press T (or press T (+)
on RC-406).
To cancel, press and hold
.
2
Connect your device to the USB input
terminal.
Create a new/
custom station
Press 1.
Delete a station
USB input terminal
While listening to IHEARTRADIO...
Add to favorite
stations for live
station
Press 2.
1
2
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [SYSTEM]
then press the knob.
,
3
4
5
Turn the volume knob to select [STATION
DEL], then press the knob.
Turn the volume knob to select [LIVE] or
[CUSTOM], then press the knob.
Turn the volume knob to select the
desired station to delete, then press the
knob.
Turn the volume knob to select [YES], then
Scan for live
station
Press 5.
KCA-iP102 (optional accessory) or
accessory cable of the iPod/iPhone
*
3
Press BSRC to select IHEARTRADIO.
Broadcast starts automatically.
Search for a station
Press
1
2
.
* Do not leave the cable inside the car when
not using.
Turn the volume knob to select a category,
then press the knob.
6
7
press the knob.
Press and hold
3
Turn the volume knob to the desired station,
then press the knob.
to exit.
To return to the previous setting item or
hierarchy, press
When a city list appears, you can skip cities in
alphabetical order.
.
(or using RC-406)
Press J / K to search for a station.
To cancel, press and hold
.
9
ENGLISH |
BLUETOOTH®
You can operate Bluetooth devices using this unit.
Pair a Bluetooth device
When connecting a Bluetooth device to the unit for the first time, perform pairing between the
unit and the device. Once the pairing is completed, the Bluetooth device will remain registered
in the unit even if you reset the unit.
Connect the microphone
Rear panel
Microphone
(supplied)
• Up to five devices can be registered (paired) in total.
• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at
any time.
• This unit supports Secure Simple Pairing (SSP).
• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the
device to the unit manually. Refer to the instruction manual of the Bluetooth device for more
information.
Microphone input jack
1
Press BSRC to turn on the unit.
2
Search and select this unit model name (KDC-BT3**U) on the Bluetooth device.
“PAIRING” “PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” scrolls on the
display.
3
Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed and “BT” will light up when the Bluetooth
connection is established.
Adjust the
microphone angle
Secure using cord clamps (not
supplied) if necessary.
• For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN)
code immediately after searching.
• Pairing request (via Bluetooth) is automatically activated if an iPhone/iPod touch is connected
through the USB input terminal. (Applicable only if [AUTO PAIRING] is set to [ON].)
Press the volume knob to pair once you have confirm the device name.
(
14)
If you turn off the unit or detach the control panel
during a phone call conversation, the Bluetooth
connection is disconnected. Continue the
conversation using your mobile phone.
Bluetooth test mode
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
– Object Push Profile (OPP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
You can check the connectivity of the supported profile between the Bluetooth device and the
unit.
• Make sure there is no Bluetooth device connected.
1
Press and hold
.
“PLEASE PAIR YOUR PHONE” appears.
2
3
Search and select this unit model name (KDC-BT3**U) on the Bluetooth device.
Operate the Bluetooth device to confirm pairing.
“TESTING” flashes on the display.
10
BLUETOOTH®
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
Improve the sound quality during a call
While talking on the phone...
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
PB DL:
Phonebook Access profile (PBAP) compatibility
• To cancel check mode, press and hold BSRC to turn off the unit.
3
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
Bluetooth mobile phone
Default: XX
To
Do this
MIC GAIN
–20 — +
increased.
8
(0): The sensitivity of the microphone increases as the number
Receive a call
Press
or the volume knob or one of
the number buttons (1 to 6) (or press
on RC-406).
NR LEVEL
–5
—
–20 (–10): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
• All the button illumination flash when
there is an incoming call.
ECHO CANCEL
1
—
10 ): Adjust the echo cancellation delay time until the least echo is
(4
• When [AUTO ANSWER] is set to the
selected time, the unit answers
being heard during a phone conversation.
incoming call automatically.
(
11)
Text message notification
Reject an incoming
call
Press BSRC (or press
on RC-406).
When the phone receives a text message, the unit rings and “SMS RECEIVED”
appears.
End a call
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Press
RC-406).
or BSRC (or press on
Switch between
hands-free and
private talk modes
Press 6 IW during a call.
Use Voice Recognition
• Operations may vary according to the
connected Bluetooth device.
1
Press and hold
The connected phone (which has been paired the earliest) is activated.
However, if priority device is connected, pressing and holding activate
the priority device.
to activate Voice Recognition.
Adjust the phone
volume
Turn the volume knob during a call.
Phone volume: [00] to [35] (Default: [15]
• This adjustment will not affect the
volume of the other sources.
)
(
13, DVC PRIORITY)
2
Speak the name of the contact you want to call or the voice command
to control the phone functions.
Switch between two
connected phones
Press
repeatedly.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of iPhone.
• Not applicable during a call.
11
ENGLISH |
BLUETOOTH®
VOICE
Speak the name of the contact you want to call or use the voice
command to control the phone functions. 11)
Bluetooth mode operations
(
1
2
Press
to enter Bluetooth mode.
Turn the volume knob to make a selection (see the following table),
then press the knob.
BATT
LOW MID FULL: Shows the strength of the battery.
NO SIGNAL LOW MID MAX: Shows the strength of the current
received signal.
/
/
SIGNAL
/
/
/
3
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
SETTINGS
Default: XX
AUTO ANSWER
1
—
30: The unit answer incoming call automatically in the selected
1
Press the volume knob to select a name or a phone number.
• “I” indicates call received, “O” indicates call made, “M” indicates call
missed.
• Press DISP SCRL to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
Press the volume knob to call.
CALL
HISTORY
time. ; OFF: Cancels.
RING MODE
SYSTEM: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
•
•
CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming
calls.
MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for
incoming text messages.
2
PHONE
BOOK
1
2
Turn the volume knob to select a name, then press the knob.
Turn the volume knob to select a phone number, then press the knob to call.
PHONE: The unit uses the connected phones’ ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it
does not support this feature.)
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does not
support PBAP, “TRANSFER PB” appears. Transfer the phonebook manually.
(
14, TRANSFER PB)
SMS NOTIFY*
ON: The unit rings and “SMS RECEIVED” appears to notify you of an
incoming text message. ; OFF: Cancels.
• Contacts are categorized as: MO (mobile), HM (home), OF (office),
OT (others), GE (general)
• This unit can display only non-accent letters. (Accent letters such as “Ú” is
showns as “U”.)
* Functionality depends on the type of the phone used.
• If the phonebook contains many contacts,
(
Select a contact by name).
Turn the volume knob to select a number (0 to 9) or character ( , #, +).
Press S / T to move the entry position.
Repeat steps and until you finish entering the phone number.
Select a contact by name
NUMBER
DIAL
1
2
• You can search through the contacts quickly according to the first letter
(A to Z), number (0 to 9), or symbol.
• The second alphabet of the contact will be searched if the first alphabet
does not exist.
1
2
3
Press the volume knob to call.
(or using RC-406)
1
2
3
Press
to enter Bluetooth mode.
1
2
Press the number buttons (
Press to call.
0
to 9) to enter the phone number.
Turn the volume knob to select [PHONE BOOK], then press the knob.
Turn the volume knob quickly to enter alphabet search mode.
The first menu (ABCDEFGHIJK) appears. To go to the other menu
(LMNOPQRSTUV or WXYZ1 ), press J/ K.
12
BLUETOOTH®
4
Turn the volume knob or press S / T to select the desired first
letter, then press the knob.
Delete a contact
Not applicable for mobile phone that supports PBAP.
• To search with numbers, select “1”.
• To search with symbols, select “ ”.
1
2
Press
to enter Bluetooth mode.
5
6
Turn the volume knob to select a name, then press the knob.
Turn the volume knob to select a phone number, then press the
knob to call.
Turn the volume knob to select [CALL HISTORY] or [PHONE BOOK], then
press the knob.
3
Turn the volume knob to select a contact.
If a contact is selected, press the volume knob to show the phone
number.
To return to the previous hierarchy, press
.
4
5
Press and hold the volume knob to enter delete mode.
Turn the volume knob to select [DELETE ONE] or [DELETE ALL], then
press the knob.
Store a contact in memory
You can store up to 6 contacts.
DELETE ONE: Selected name or phone number in step 3 is deleted.
DELETE ALL: All names or phone numbers from the selected menu in
step 2 is deleted.
1
2
Press
to enter Bluetooth mode.
Turn the volume knob to select [CALL HISTORY] [PHONE BOOK], or
,
[NUMBER DIAL], then press the knob.
6
Turn the volume knob to select [YES] or [NO], then press the knob.
3
4
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
Press and hold one of the number buttons (1 to 6).
“STORED” appears when the contact is stored.
Bluetooth mode settings
1
2
3
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [BT MODE], then press the knob.
Turn the volume knob to make a selection (see the following table),
then press the knob.
To erase a contact from the preset memory, select [NUMBER DIAL] in
step and store a blank number.
2
4
Press and hold
to exit.
Make a call from memory
To return to the previous setting item or hierarchy, press
.
1
2
3
Press
to enter Bluetooth mode.
Default: XX
Press one of the number buttons (1 to 6).
Press the volume knob to call.
“NO MEMORY” appears if there is no contacts stored.
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
AUDIO SELECT
DEVICE DELETE
1
2
Turn the volume knob to select a device to delete, then press the knob.
Turn the volume knob to select [YES] or [NO], then press the knob.
DVC PRIORITY
Selects a device to be connected as priority device.
“ ” appears in front of the device name set as priority.
13
ENGLISH |
BLUETOOTH®
Internet radio via Bluetooth
Bluetooth audio player
TRANSFER
PB
“DL PB
” appears and transfer the
KDC-BT318U
(for
)
Operations and display indications may differ
according to their availability on the connected
device.
phonebook of the connected phone to
this unit manually.
* Selectable only when the connected
phone supports OPP.
*
Listen to Pandora
Preparation:
Select [ON] for [PANDORA SRC]
.
(
4)
To
Do this
PIN CODE
EDIT
(0000)
Changes the PIN code (up to 6 digits).
You can listen to Pandora on your smart phone
(Android OS) through Bluetooth on this unit.
1
Turn the volume knob to select a
number.
Playback
1 Press BSRC (or press
SRC on RC-406) to select
BT AUDIO.
1
Open the Pandora application on your
device.
2
Press S / T to move the entry
position.
2 Operate the Bluetooth
audio player to start
playback.
2
3
Connect to Bluetooth audio player.
(
10)
Repeat steps
entering the PIN code.
Press the volume knob to confirm.
1
and until you finish
2
Press BSRC to select PANDORA.
The source switches and broadcast starts
automatically.
3
Pause or resume
playback
Press 6 IW (or press
ENT IW on RC-406)
RECONNECT
ON: The unit automatically reconnect
when the Bluetooth device is within
range. ; OFF: Cancels.
• You can operate Pandora in the same way as
Pandora for iPod/iPhone.
(
8)
Select group or
folder
Press J/ K (or press
*
AM– / #FM+ on RC-406).
AUTO
PAIRING
ON: The unit automatically pair
supported Bluetooth device (iPhone/
iPod touch) when it is connected
through USB input terminal. Depending
on the iOS version of the connected
iPhone/iPod touch, this function may
not work. ; OFF: Cancels.
Listen to iHeartRadio
Reverse/forward
skip
Press S / T (or press
S / T (+) on RC-406)
Preparation:
Select [ON] for [IHEART SRC]
.
(
4)
Reverse/fast-
forward
Press and hold S / T
(or press and hold
S / T (+) on RC-406).
You can listen to iHeartRadio on your smart
phone (Android OS) through Bluetooth on this
unit.
Repeat play
Press 4
make a selection.
repeatedly to
BT HF/AUDIO FRONT: Ouputs audio from the front left
and right speakers. ; ALL: Outputs audio
from all the speakers.
1
2
3
Open the iHeart Link application on your
smart phone.
ALL REPEAT, FILE REPEAT,
REPEAT OFF
Connect your smart phone via Bluetooth
connection.
(
10)
INITIALIZE
YES: Updates all the Bluetooth settings
(including stored pairing, phonebook,
and etc.). ; NO: Cancels.
Random play
Press BSRC to select IHEARTRADIO.
The source switches and broadcast starts
automatically.
Press 3
make a selection.
repeatedly to
FOLDER RANDOM,
RANDOM OFF
Press and hold 3
select “ALL RANDOM.”
• You can operate iHeartRadio in the same way
as iHeartRadio for iPod/iPhone.
(
9)
to
14
AUDIO SETTINGS
While listening to any source...
SUB-W PHASE
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[LPF SUBWOOFER].)
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [AUDIO CONTROL], then press the
knob.
3
4
Turn the volume knob to make a selection (see the following table),
then press the knob.
FADER
R15 to F15
(
0
): Adjusts the rear and front speaker output balance.
): Adjusts the left and right speaker output balance.
Repeat step 3 until the desired item is selected or activated.
BALANCE
L15 to R15
(
0
Press and hold
to exit.
VOLUME OFFSET –8 to +8 (for AUX) ; –8 to (for other sources): Presets the volume
0
(or using RC-406)
1 Press AUD to enter [AUDIO CONTROL]
2 Press J/ K to make a selection, then press ENT IW.
(Default:
0)
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
.
SOUND RECNSTR ON: Creates realistic sound by compensating the high-frequency
(Sound
reconstruction)
components and restoring the rise-time of the waveform that are lost in
audio data compression. ; OFF: Cancels.
To return to the previous setting item or hierarchy, press
.
Default: XX
•
[SUB-W LEVEL]
/
[SUBWOOFER SET]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE] is
4)
selectable only if [SWITCH PREOUT] is set to [SUB-W]
.
(
SUB-W LEVEL
BASS LEVEL
MID LEVEL
TRE LEVEL
–15 to +15 (0): Adjusts the subwoofer output level.
• [SUB-W LEVEL]
/
[LPF SUBWOOFER]
/
[SUB-W PHASE] is selectable only if
–8 to +8 (+6):
[SUBWOOFER SET] is set to [ON]
.
Adjusts the level to memorize for each source.
–8 to +8 (+5): (Before making an adjustment, select the source you
want to adjust.)
–8 to +8 (0):
PRESET EQ
DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL/
USER: Selects a preset equalizer suitable to the music genre. (Select
[USER] to use the customized bass, middle, and treble settings.)
[DRIVE EQ] is a preset equalizer that reduces noise from the road.
BASS BOOST
LOUDNESS
LV1
/
LV2
/
LV3: Selects your preferred bass boost level. ; OFF: Cancels.
LV1
/
LV2: Selects your preferred low and high frequencies boost to
produce a well-balanced sound at a low volume level. ; OFF: Cancels.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ; 85HZ 120HZ/
/
160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz
are sent to the subwoofer.
15
ENGLISH |
DISPLAY SETTINGS
MORE INFORMATION
1
Press the volume knob to enter [FUNCTION]
Turn the volume knob to select [DISPLAY], then
press the knob.
.
General
• This unit can only play the following CDs:
About KENWOOD Music Editor Light and
2
KENWOOD Music Control
• This unit supports the PC application KENWOOD Music Editor Light and
Android™ application KENWOOD Music Control.
3
Turn the volume knob to make a selection
(see the following table), then press the knob.
Repeat step 3 until the desired item is selected
or activated.
• When you play audio files with song data added using the KENWOOD Music
Editor Light or KENWOOD Music Control, you can search for audio files by
Genres, Artists, Albums, Playlists, and Songs.
• KENWOOD Music Editor Light and KENWOOD Music Control are available on the
• Detailed information and notes about the
playable audio files are stated in an online
manual on the following web site:
4
Press and hold
to exit.
To return to the previous setting item or hierarchy,
About iPod/iPhone
Playable files
press
.
Made for
•
Playable audio file: MP3 (.mp3), WMA (.wma)
- iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
- iPod classic
- iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
- iPhone, iPhone 3G, 3GS, 4, 4S, 5
• For the latest compatible list and software versions of iPhone/iPod, see:
• You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.
Default: XX
• Playable disc media: CD-R/CD-RW/CD-ROM
• Playable disc file format: ISO 9660 Level 1/2,
Joliet, Long file name.
• Playable USB device file system: FAT12,
FAT16, FAT32
Even when audio files comply with the standards
listed above, playback may be impossible depending
on the types or conditions of media or device.
COLOR
VARIABLE SCAN
/
COLOR 01
—
COLOR 24
/
SELECT*
USER: Selects your preferred button
illumination color.
You can create your own color (when
[COLOR 01]
selected). The color you have created can be
selected when you select [USER]
—
[COLOR 24] or [USER] is
About Pandora
•
Pandora is available only in the U.S., Australia and New Zealand.
.
Unplayable discs
• Discs that are not round.
• Discs with coloring on the recording surface
or discs that are dirty.
• Recordable/ReWritable discs that have not
been finalized.
• Because Pandora is a third-party service, the specifications are subject to
change without prior notice. Accordingly, compatibility may be impaired, or
some or all of the services may become unavailable.
1
2
3
Press and hold the volume knob to enter
the detailed color adjustment.
Press S / T to select the color (
R
/
G
/
• Some functions of Pandora cannot be operated from this unit.
• For issues using the application, please contact Pandora at
B) to adjust.
Turn the volume knob to adjust the level
(
0
—
9), then press the knob.
• 8 cm CD. Attempting to insert using an
adapter may cause malfunction.
About iHeartRadio
DIMMER
ON: Dims the display illumination (and button
illumination*). ; OFF: Illuminates according to
the [BRIGHTNESS] settings.
• iHeartRadio® is a third-party service, therefore the specifications are subject
to change without prior notice. Accordingly, compatibility may be impaired or
some or all of the services may become unavailable.
About USB devices
• This unit can play MP3/WMA/WAV files
stored on a USB mass storage class device.
• Some iHeartRadio® functionality cannot be operated from this unit.
BRIGHTNESS LVL 0
—
LVL 31: Selects your preferred
•
•
You cannot connect a USB device via a USB hub.
Connecting a cable whose total length is
longer than 5 m may result in abnormal
playback.
About Bluetooth
brightness level for display illumination (and
button illumination*).
• Depending on the Bluetooth version of the device, some Bluetooth devices
may not be able to connect to this unit.
TEXT SCROLL AUTO ONCE: Selects whether to scroll the
/
• This unit may not work with some Bluetooth devices.
• Signal conditions vary, depending on the surroundings.
• For more information about Bluetooth, visit the following website:
display information automatically, or scroll
•
This unit cannot recognize a USB device whose
rating is other than 5 V and exceeds 1 A.
only once. ; OFF: Cancels.
KDC-BT358U
* For
16
.
TROUBLESHOOTING
Symptom
Remedy
Symptom
Remedy
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
“iPod ERROR” appears.
• Reconnect the iPod.
• Reset the iPod.
“PROTECT” appears and
no operations can be
done.
Check to be sure the terminals of the speaker wires are
insulated properly, then reset the unit. If this does not solve
the problem, consult your nearest service center.
Noise is generated.
Skip to another track or change the disc.
Tracks do not play back as you
intended them to play.
Playback order is determined when files are recorded.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on
the display is incorrect.
Clean the connectors.
(
2)
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
This is caused by how the tracks are recorded.
Elapsed playing time is not
correct.
Correct characters are not
displayed (e.g. album name).
This unit can only display uppercase letters, numbers, and
a limited number of symbols.
The unit does not work at
all.
Reset the unit.
(
3)
“ADD ERROR”
“SEARCH ERROR”
New station creation is unsuccessful.
• Radio reception is poor. • Connect the antenna firmly.
• Static noise while
listening to the radio.
• Pull the antenna out all the way.
“CHECK DEVICE”
“NO SKIPS”
Check the Pandora application on your device.
The skip limit has been reached.
No stations are found.
“NA FILE” appears.
Make sure the disc contains supported audio files.
(
16)
“NO STATIONS”
“STATION LIMIT”
“NO DISC” appears.
Insert a playable disc into the loading slot.
The number of registered stations has reached its limit.
Retry after deleting unnecessary stations from your device.
“TOC ERROR” appears.
“PLEASE EJECT” appears.
Make sure the disc is clean and inserted properly.
Reset the unit. If this does not solve the problem, consult your
nearest service center.
“UPGRADE APP”
Make sure you have installed the latest version of the
Pandora application on your device.
Disc cannot be ejected.
“READ ERROR” appears.
Press and hold
to drop the disc when it is ejected. If this does not solve the
problem, reset the unit. 3)
M
to forcibly eject the disc. Be careful not
“CONNECT ERROR”
“RATING ERROR”
“LICENSE ERROR”
Communication is unstable.
(
Registration of thumbs up/thumbs down has failed.
Copy the files and folders onto the USB device again. If this
does not solve the problem, reset the USB device or use
another USB device.
You try to access from a country which Pandora is not
deliverable.
Station cannot be
selected.
If “Explicit Content” in [Account Settings] is checked in
the web version of iHeartRADIO, custom stations become
unavailable.
“NO DEVICE” appears.
“COPY PRO” appears.
“NA DEVICE” appears.
“NO MUSIC” appears.
Connect a USB device, and change the source to USB again.
A copy-protected file is played.
“CANNOT CREATE”
“CANNOT SAVE”
Custom station name creation is unsuccessful.
Addition to the favorite category failed.
Connect a supported USB device, and check the connections.
Connect a USB device that contains playable audio files.
17
ENGLISH |
TROUBLESHOOTING
Symptom
“DISCONNECTED”
Remedy
Symptom
• Voice calling method is
Remedy
Check the connection to the device.
The skip limit has been reached. Retry later.
No stations are found.
• Use voice calling method in a more quiet environment.
• Reduce the distance from the microphone when you
speak the name.
• Make sure the same voice as the registered voice tag is
used.
not successful.
• “N/A VOICE TAG”
appears.
“NO SKIPS”
“NO STATIONS”
“NOT CONNECTED”
“IHEARTLINK UP”
Link to the application is impossible.
Make sure you have installed the latest version of the
iHeart Link for KENWOOD application on your device.
“NOT SUPPORT” appears.
The connected phone does not support Voice
Recognition feature.
“PLEASE LOGIN”
You haven’t log in. Log in again.
Broadcast from the station is over.
• “NO ENTRY” appears.
• “NO PAIR” appears.
There is no registered device connected/found via
Bluetooth.
“STATION NOT
AVAILABLE”
“ERROR” appears.
Try the operation again. If “ERROR” appears again,
check if the device supports the function you have
tried.
“STATION NOT
SELECTED”
No station is selected.
“NO INFO” appears.
Bluetooth device cannot get the contact information.
“STREAM ERROR”
“THUMB FAILED”
“TIMED OUT”
Broadcast data is interrupted.
Sound is being interrupted • Reduce the distance between the unit and the
Registration of Thumbs Up/Down has failed.
The request has resulted in time-out.
or skipped during playback
of a Bluetooth audio
player.
Bluetooth audio player.
• Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to
the unit.
No Bluetooth device is • Search from the Bluetooth device again.
detected.
• Reset the unit.
(
3)
Pairing cannot be
made.
• Make sure you have entered the same PIN code to both the
unit and Bluetooth device.
• Delete pairing information from both the unit and the
The connected Bluetooth
audio player cannot be
controlled.
• Check whether the connected Bluetooth audio player
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
Bluetooth device, then perform pairing again.
(
10)
• Disconnect and connect the Bluetooth player again.
“DEVICE FULL” appears.
Echo or noise occurs.
The number of registered devices has reached its limit.
• “HF ERROR XX” appears.
• “BT ERROR” appears.
Reset the unit and try the operation again. If this does
not solve the problem, consult your nearest service
center.
Retry after deleting an unnecessary device.
(
13, DEVICE
DELETE)
• Adjust the microphone unit’s position.
• Check the [ECHO CANCEL] setting.
(
10)
(
11)
Phone sound quality
is poor.
• Reduce the distance between the unit and the Bluetooth
device.
• Move the car to a place where you can get a better signal
reception.
18
SPECIFICATIONS
FM Frequency Range
Version
Frequency Range
Output Power
Maximum Communication Range
Profile
Bluetooth Ver.2.1+EDR Certified
2.402 GHz — 2.480 GHz
+4 dBm (MAX), 0 dBm (AVE) Power Class 2
Line of sight approx. 10 m (32.8 ft)
HFP (Hands-Free Profile)
SPP (Serial Port Profile)
PBAP (Phonebook Access Profile)
OPP (Object Push Profile)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
KDC-BT358U
:
87.5 MHz — 108 MHz (50 kHz space)
KDC-BT318U
:
87.9 MHz — 107.9 MHz (200 kHz space)
8.2 dBf (0.71 μV/75 Ω)
17.2 dBf (2.0 μV/75 Ω)
Usable Sensitivity (S/N = 26 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response ( 3 dB)
Signal-to-Noise Ratio (MONO)
Stereo Separation (1 kHz)
30 Hz — 15 kHz
64 dB
40 dB
AM Frequency Range
530 kHz — 1 700 kHz (10 kHz space)
29 dBμ (28.2 μV)
Maximum Output Power
Full Bandwidth Power
Speaker Impedance
Tone Action
50 W × 4
22 W × 4 (at less than 1 % THD)
4 Ω — 8 Ω
Bass
Middle
Treble
2 500 mV/10 kΩ
≤ 600 Ω
Usable Sensitivity (S/N = 20 dB)
Laser Diode
Digital Filter (D/A)
Spindle Speed
GaAIAs
8 times over sampling
500 rpm — 200 rpm (CLV)
Below measurable limit
20 Hz — 20 kHz
0.01 %
105 dB
90 dB
200 Hz 8 dB
2.5 kHz 8 dB
12.5 kHz 8 dB
Wow & Flutter
Preout Level/Load (CD)
Preout Impedance
Frequency Response ( 1 dB)
Total Harmonic Distortion (1 kHz)
Signal-to-Noise Ratio (1 kHz)
Dynamic Range
Channel Seperation
MP3 Decode
Frequency Response ( 3 dB)
Input Maximum Voltage
Input Impedance
20 Hz — 20 kHz
1 200 mV
30 kΩ
85 dB
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
Operating Voltage
14.4 V (10.5 V — 16 V allowable)
10 A
0°C — +40°C
182 mm × 53 mm × 159 mm
(7-3/16" × 2-1/8" × 6-1/4")
WMA Decode
Maximum Current Consumption
Operational Temperature Range
Installation Size (W × H × D)
USB Standard
File System
Maximum Supply Current
MP3 Decode
WMA Decode
WAV Decode
USB 1.1, USB 2.0 (Full speed)
FAT12/ 16/ 32
DC 5 V 1 A
Compliant with MPEG-1/2 Audio Layer-3
Compliant with Windows Media Audio
Linear-PCM
Weight
1.3 kg (2.87 lbs)
Subject to change without notice.
19
ENGLISH |
Warning
Installing the unit (in-dash mounting)
• The unit can only be used with a 12 V DC power supply, negative
ground.
• Disconnect the battery’s negative terminal before wiring and
mounting.
• Do not connect Battery wire (yellow) and Ignition wire (red) to the
car chassis or Ground wire (black) to prevent a short circuit.
• Insulate unconnected wires with vinyl tape to prevent a short circuit.
• Be sure to ground this unit to the car’s chassis again after
installation.
Do the required wiring.
21)
(
Hook on the top side
Caution
• For safety’s sake, leave wiring and mounting to professionals.
Consult the car audio dealer.
Dashboard of
your car
Orientate the trim plate as
illustrated before fitting.
• Install this unit in the console of your vehicle. Do not touch the metal
parts of this unit during and shortly after use of the unit. Metal parts
such as the heat sink and enclosure become hot.
• Do not connect the
·
wires of speakers to the car chassis or Ground
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
wire (black), or connect them in parallel.
Mount the unit at an angle of less than 30º.
•
• If your vehicle wiring harness does not have the ignition terminal,
connect Ignition wire (red) to the terminal on the vehicle’s fuse box
which provides 12 V DC power supply and is turned on and off by the
ignition key.
• After the unit is installed, check whether the brake lamps, blinkers,
wipers, etc. on the car are working properly.
When installing without the mounting sleeve
1
Remove the mounting sleeve and trim plate from
the unit.
2
Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with
screws (commercially available).
• If the fuse blows, first make sure the wires are not touching car’s
chassis, then replace the old fuse with one that has the same rating.
Use only the specified screws. Using wrong screws might damage the unit.
Basic procedure
How to remove the unit
1
2
3
Remove the key from the ignition switch, then
disconnect the · terminal of the car battery.
Connect the wires properly.
1
2
Detach the faceplate.
Fit the catch pin on the extraction keys
into the holes on both sides of the trim
plate, then pull it out.
See Wiring connection.
(
21)
Install the unit to your car.
3
Insert the extraction keys deeply into the
slots on each side, then follow the arrows
as shown on the right.
See Installing the unit (in-dash mounting).
Connect the · terminal of the car battery.
4
5
Reset the unit.
(
3)
20
Wiring connection
Front output, Rear/ subwoofer output
Part list for installation
(A) Faceplate
Fuse (10 A)
Antenna terminal
Microphone input jack
(
10)
If no connections are made, do not let the wire
come out from the tab.
(B) Trim plate
White
Light blue/yellow
To the steering wheel remote control
adapter
To front speaker (left)
White/Black
(Steering remote
control wire)
Gray
(C) Mounting sleeve
To front speaker (right)
To rear speaker (left)
Gray/Black
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
Blue/White
Green
(Power control wire)
Green/Black
Purple
To rear speaker (right)
Ignition switch
Purple/Black
(D) Wiring harness
Brown
To connect the Kenwood navigation system,
refer your navigations manual.
(Mute control wire)
Car fuse box
Red
(Ignition wire)
Blue
Yellow
(E) Extraction key
(Not used)
Car fuse box
(Antenna control
wire)
(Battery wire)
Black (Ground wire)
To the metallic body or chassis
of the car
Battery
21
ENGLISH |
IC (Industry Canada) Notice
CAUTION
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
The term “IC: ” before the certification/ registration number only signifies that the Industry
Canada technical specification were met.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C
to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very
low levels of RF energy that it deemed to comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it should be installed and operated keeping the
radiator at least 20cm or more away from person’s body (excluding extremities: hands,
wrists, feet and ankles). Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
Note de IC (Industrie Canada)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
L’expression “IC:” avant le numéro d’homologation/ enregistrement signifie seulement
que les specifications techniques d’Industrie Canada ont été respectées.
ATTENTION
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées
pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui
est considérée conforme sans évaluation de l’exposition maximale autorisée. Cependant,
cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre
le dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, pieds et
chevilles). Conformément à la réglementation d’Industrie Canada, le présent émetteur radio
peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé
pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son
gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l’intensité nécessaire à l’établissement d’une communication satisfaisante.
Para cumplimiento de la COFETEL:
“La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada”
• Contains Bluetooth ModuleFCC ID: XQN-BTR60X
• Contains Bluetooth ModuleIC: 9688A-BTR601
i
CAUTION
Información acerca de la eliminación de equipos eléctricos y electrónicos al final
de la vida útil (aplicable a los países que hayan adoptado sistemas independientes
de recogida de residuos)
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
In compliance with Federal Regulations, following are reproductions of labels on, or inside
the product relating to laser product safety.
Los productos con el símbolo de un contenedor con ruedas tachado no
podrán ser desechados como residuos domésticos. Los equipos eléctricos y
electrónicos al final de la vida útil, deberán ser reciclados en instalaciones
que puedan dar el tratamiento adecuado a estos productos y a sus
subproductos residuales correspondientes. Póngase en contacto con su
administración local para obtener información sobre el punto de recogida
más cercano. Un tratamiento correcto del reciclaje y la eliminación de
residuos ayuda a conservar los recursos y evita al mismo tiempo efectos
perjudiciales en la salud y el medio ambiente.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR
SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
Location : Top Plate
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly
approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
Informação sobre a eliminação de pilhas
Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada
ao revendedor ou entidade autorizada para que a mesma seja devolvida ao fabricante ou
importador.
A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar os recursos
naturais ao mesmo tempo que prevenirão os efeitos prejudicais à nossa saúde e ao meio
ambiente.
FCC NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment may
cause harmful interference to radio communications, if it is not installed and used in
accordance with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ii
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory
with iPod or iPhone may affect wireless performance.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
• Lightning is a trademark of Apple Inc.
• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.
• iHeartRadio® is a registered mark of Clear Channel Broadcasting, Inc. in the United States and other countries. Such marks are used under license.
• Android is trademark of Google Inc.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and
trade names are those of their respective owners.
|