HP A3100 V2 User Manual

HP A3100 v2 Switch Series  
About the A3100 v2 Configuration Guides  
HP A3100-8 v2 SI Switch (JG221A)  
HP A3100-16 v2 SI Switch (JG222A)  
HP A3100-24 v2 SI Switch (JG223A)  
HP A3100-8 v2 EI Switch (JD318B)  
HP A3100-16 v2 EI Switch (JD319B)  
HP A3100-24 v2 EI Switch (JD320B)  
HP A3100-8-PoE v2 EI Switch (JD311B)  
HP A3100-16-PoE v2 EI Switch (JD312B)  
HP A3100-24-PoE v2 EI Switch (JD313B)  
Part number: 5998-1962  
Software version: Release 5103  
Document version: 6W100-20110909  
About the HP A3100 v2 configuration guides  
The HP A3100 v2 configuration guides are part of the HP A3100 v2 documentation set. They describe  
the software features for the HP A3100 v2 Switch Series Release5103, and guide you through the  
software configuration procedures. These configuration guides also provide configuration examples to  
help you apply the software features to different network scenarios. The HP A3100 v2 documentation  
set includes 9 configuration guides:  
Configuration guide  
Content  
Describes how to use the command line interface of the switch, log in to and set  
up the switch, and use the automatic configuration function. This guide includes:  
CLI configuration  
Login methods  
CLI login  
Web login  
NMS login  
Fundamentals Configuration  
Guide  
User login control  
FTP configuration  
TFTP configuration  
File management  
Configuration file management  
Software upgrade configuration  
Device management  
Automatic configuration  
Configuration guide  
Content  
Covers Layer 2 technologies and features used on a LAN switched network,  
such as VLAN technology, port isolation, MSTP. You can use these features to  
divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN,  
re-mark VLAN tags, and so on. This guide includes:  
Ethernet interface configuration  
Loopback and null interface configuration  
MAC address table configuration  
MAC information configuration  
Ethernet Link aggregation configuration  
Port Isolation configuration  
Layer 2 – LAN Switching  
Configuration Guide  
MSTP configuration  
BPDU tunneling configuration (available only on the A3100 v2 EI)  
VLAN configuration  
Voice VLAN configuration (available only on the A3100 v2 EI)  
GVRP configuration  
QinQ configuration  
VLAN Mapping Configuration (available only on the A3100 v2 EI)  
LLDP configuration  
Describes how to configure IP addressing, DHCP, IP performance optimization,  
ARP, DNS, IPv6 basics and DHCPv6,. This guide includes:  
ARP configuration  
Gratuitous ARP configuration  
IP addressing configuration  
DHCP overview  
DHCP client configuration  
DHCP snooping configuration  
BOOTP client configuration  
IPv4 DNS configuration  
Layer 3 – IP Services  
Configuration Guide  
IPv6 DNS configuration  
IP performance optimization configuration  
IPv6 basics configuration  
DHCPv6 overview  
DHCPv6 client configuration  
DHCPv6 snooping configuration  
Covers the routing technologies for IPv4 and IPv6 networks. This guide includes:  
IP Routing Overview  
Layer 3 – IP Routing  
Configuration Guide  
Static Routing Configuration  
IPv6 Static Routing Configuration  
Configuration guide  
Content  
Describes Layer 2 multicast fundamentals and configuration. This guide  
includes:  
Mulitcast overview  
IP Multicast Configuration  
Guide  
IGMP snooping configuration  
Multicast VLAN configuration  
MLD snooping configuration (available only on the A3100 v2 EI)  
IPv6 multicast VLAN configuration (available only on the A3100 v2 EI)  
Configuration guide  
Content  
Describes how to classify traffic with ACLs, and allocate network resources and  
manage congestions with QoS technologies to improve network performance  
and network use efficiency. This guide includes:  
ACL configuration  
QoS overview  
QoS configuration approaches  
Priority mapping configuration  
ACL and QoS Configuration  
Guide  
Traffic policing, traffic shaping, and line rate configuration  
Congestion management configuration  
Traffic filtering configuration (available only on the A3100 v2 EI)  
Priority marking configuration (available only on the A3100 v2 EI)  
Traffic redirecting configuration (available only on the A3100 v2 EI)  
Class-based accounting configuration (available only on the A3100 v2 EI)  
Burst configuration  
Appendix  
Covers security features. The major security features available on the switch  
include identity authentication (AAA and PKI), access security (802.1X, MAC  
authentication, and so on), secure management (SSH), SSL, and attack  
protection (IP source guard, ARP attack protection, and so on). This guide  
includes:  
AAA configuration  
802.1X fundamentals  
802.1X configuration  
EAD fast deployment configuration (available only on the A3100 v2 EI)  
MAC authentication configuration  
Portal configuration (available only on the A3100 v2 EI)  
Triple authentication configuration (available only on the A3100 v2 EI)  
Port security configuration  
Security Configuration  
Guide  
User profile configuration  
HABP configuration  
Public key configuration  
PKI configuration  
SSH2.0 configuration  
SFTP configuration  
SSL configuration  
TCP attack protection configuration  
IP source guard configuration (available only on the A3100 v2 EI)  
ARP attack protection configuration  
ND attack defense configuration  
SAVI configuration (available only on the A3100 v2 EI)  
Configuration guide  
Content  
Describes high availability technologies and features available on the switch for  
failure detection and failover. Failure detection technologies focus on fault  
detection and isolation. Failover technologies focus on network recovery. This  
guide includes:  
High availability overview  
High Availability  
Configuration Guide  
Ethernet OAM configuration  
DLDP configuration  
Smart Link configuration (available only on the A3100 v2 EI)  
Monitor Link configuration (available only on the A3100 v2 EI)  
Describes features that help you manage and monitor your network, for  
example, manage system events, assess network performance, synchronize the  
clock for all devices with the clock in the network, supply power for attached  
devices by using PoE, perform cluster management for switches, and test  
network connectivity. This guide includes:  
System maintenance and debugging  
NQA configuration  
NTP configuration  
Network Management and  
Monitoring Configuration  
Guide  
PoE configuration (available only on the A3100 v2 EI)  
SNMP configuration  
RMON configuration  
Cluster management configuration  
Port mirroring configuration  
Traffic mirroring configuration (available only on the A3100 v2 EI)  
Stack Management configuration  
Information center configuration  

Toshiba Rav Sm1101at E User Manual
Siemens Automobile Parts Ba 2030 User Manual
Sharp Mx 3100n User Manual
Schumacher Ss 210a User Manual
Samsung Sgh X640 User Manual
Omega Speaker Systems Drx Acv User Manual
Mitsubishi Electronics Peh 3ek User Manual
MAYTAG MDB6949SD User Manual
MAKITA RP0900 User Manual
LG 60UF8500 UB User Manual