Dryer
Con ten ts
Appliance Registration
Automatic
Press Drying Tips 5-7, 11, 12
2
5
10-12
Problem Solver
Care and Cleaning
Consumer Services
13
Safety Instructions
Sorting
3,4
4,8
Controls Setting Guide
Dryer Exhaust
13
5
6,7
13
Storing Dryer
Timed Drying
End-of-Cycle Signal
Energy-Saving Tips
5
9
User Maintenance Instructions 13
Back Cover
Warranty
Extra Care Feature
Knit Drying Tips
5
5-7,
Lint Filter
Loading
4,9, 13
4,9
Model and Serial Numbers
operating Your Dryer
2
4,5
Models
If You Need Service
Help us help you...
To
service, see the
Before using your dryer,
read this book carefully.
To obtain a Spanish language
version of this book, call
GE Answer
800.626.2000
consumer information service.
Consumer Services page in the
back of this book.
It is intended to help you operate and
maintain your new dryer properly.
We’re proud of our service and
want you to be pleased. If for some
reason you are not happy with the
service you receive, here are three
steps to follow for further help.
Keep handy for answers to your
questions.
la version en
de
manual,
If you don’t understand something
or need more help, write (include
your phone number):
Consumer Affairs
GE Appliances
Appliance Park
Louisville,
FIRST, contact the people who
serviced your appliance. Explain
name a
GE Answer
de
why
are not pleased. In most
cases, this will solve the problem.
800.626.2000.
NEXT, if you are still not pleased,
write all the details-including
your phone number—to:
FOR YOUR SAFETY
Manager, Consumer Relations
GE Appliances
If you received a
damaged dryer...
If you smell gas:
1. Open windows.
Appliance Park
Immediately contact the dealer
(or builder) that sold you the
dryer.
Louisville, Kentucky 40225
FINALLY, if your problem is
not resolved, write:
2. Don’t touch
electrical
Major Appliance
Save time and money.
Consumer Action Panel
Before you request service...
check the Problem Solver on
pages 10-12. It lists causes of
minor operating problems that
you can correct yourself.
3. Extinguish any
open flame.
4. Immediately call
your gas supplier.
20 North
Drive
Chicago, Illinois 60606
*Don’t turn electric switches
Write down the model
and serial numbers.
on or off because
ignite the gas.
may
You’ll find them on a label on the
front of the dryer behind the door.
These numbers are also on the
Consumer Product Ownership
Registration Card that came with
your dryer. Before sending in this
card, please write these numbers
here:
FOR YOUR SAFETY
Do not store or use
gasoline or other
flammable vapors and
liquids in the vicinity
of this or any other
appliance.
Model Number
Serial Number
Use these numbers in any
correspondence or service
concerning your dryer.
All drying instruction terms in this book conform to the Care Labeling
Rule established by the Federal Trade Commission, January 1984.
2
INSTRUCTIONS
Read all instruction before
this appliance.
to prevent large amounts of
(such as cleaning cloths, mops,
towels used in beauty salons,
restaurants or barber shops, etc.)
must not be placed in or near the
dryer until all traces of these
flammable liquids or solids and
their fumes have been removed.
There are many highly flammable
items used in homes such as:
acetone, denatured alcohol,
gasoline, kerosene, some
moisture and lint from being blown
into the room. Carefully follow the
The California Safe Drinking
Water and Toxic Enforcement Act
requires the Governor of California
to publish a list of substances
known to the state to cause cancer,
birth defects or other reproductive
harm and requires businesses to
warn customers of potential
Exhausting
Instructions.
in the
●
When disconnecting this
appliance pull by the plug rather
than the cord to avoid damage to
the cord or junction of cord and
plug. Make sure that the cord is
located so that it will not be stepped
on, tripped over or otherwise
subjected to damage or stress.
exposure to such substances.
household cleaners, some spot
removers, turpentines, waxes, wax
removers and products containing
petroleum distillates.
Gas appliances can cause minor
exposure to four of these substances,
namely benzene, carbon monoxide,
formaldehyde and soot, caused
primarily by the incomplete
●
Do not repair or replace any
part of the appliance or attempt
any servicing unless specifically
recommended in this Use and
Care Book or in published
repair instructions that you
understand and have the skills to
carry out.
●
Clean the lint filter before each
load to prevent lint accumulation
inside the dryer or in the room.
DO NOT OPERATE THE
DRYER WITHOUT THE LINT
FILTER IN PLACE.
combustion of natural gas or
fuels. Properly
dryers will
minimize incomplete combustion.
Exposure to these substances can
be minimized further by properly
venting the dryers to the outdoors.
●
Keep area around and
underneath your appliance free
from the accumulation of
combustible materials, such as
lint, paper, rags, chemicals, etc.
-
To minimize the possibility
of a fire hazard.
reduce the risk
of fire, electric shock, or
to persons when using your
basic precautions,
.
Do not use heat to dry articles
containing rubber, plastic, or
similar materials (such as padded
bras, tennis shoes, galoshes, bath
mats, rugs, bibs, baby pants, plastic
bags, etc.) as these materials may
melt or burn. Also, some rubber
when heated, can under
including the following:
●
Do not store items that may burn
or melt (such as clothing, paper
material, plastics or plastic
containers, etc. ) on top of the dryer
during operation.
●
this appliance only for its
intended purpose as described in
this Use and Care Book.
●
This dryer must be properly
●
The interior of the machine
installed and located in
and the exhaust duct connection
inside the dryer should be
cleaned periodically by a
qualified individual.
certain circumstances produce
fire by spontaneous combustion.
accordance with the Installation
Instructions before it is used. If
you did not receive an Installation
Instructions sheet with your dryer,
you can obtain one by contacting
the service location nearest you.
●
Garments labeled “Dry Away
From Heat” (such as life jackets
containing Kapok) must not be put
in your dryer.
●
Exhaust duct (see installation
instructions). Use
metal
duct inside dryer or for
—Properly ground to conform
with all governing codes and
ordinances. FO11OW details in
Installation Instructions.
●
Do not wash or dry articles
exhausting dryer to the outside.
that have been cleaned in, washed
in, soaked in, or spotted with
combustible or
To
of injury.
the possibility
—Locate where the temperature
(such wax, paint, gasoline,
dry-cleaning
solvents, kerosene, etc.) which
may ignite or explode. Do not use
or store such substances on/or
around your washer and/or dryer
during operation.
is above
for
●
Never reach into the dryer while
satisfactory operation of the
dryer control system. Do not
install or store the dryer where it
will be exposed to the weather.
the drum is moving. Before loading,
unloading or adding clothes, wait
until the drum has completely
stopped.
–Connect to a properly rated,
protected and sized power-supply
circuit to avoid electrical overload.
—Exhausting to the outside is
STRONGLY RECOMMENDED
●
Close supervision is necessary
if this appliance is used by or near
children. Do not children to
.
Any article on which you have
used a cleaning solvent, or which
contains flammable materials
3
Safety
Dryer-applied fabric
softeners or
manufacturer’s care instructions
should be followed very carefully.
play inside, on or with this
appliance or any
appliance. Dispose of
conditioners
●
Never climb on or stand on the
appliances and shipping or packing
materials properly. Before
discarding a dryer, or removing
from service, remove the door
of the drying compartment.
dryer top or door.
You may wish to soften your
laundered fabrics or reduce the
static electricity in them. We
you use either a
fabric softener in the wash cycle,
according to the manufacturer’s
instructions for those
try a dryer-added product for
which the manufacturer gives
written assurance on the package
that their product can be
used in your dryer.
Service or performance problems
caused by the use of these products
are the responsibility of the
manufacturers of those products
and are not covered under the
warranty of this appliance.
●
Do not tamper with controls.
.
To minimize the possibility
of electric shock, unplug this
appliance from the power supply
before attempting any maintenance
or cleaning (except the removal and
cleaning of the lint filter).
Keep all laundry aids (such
as detergents, bleaches, fabric
etc.) out of the reach of
children, preferably in a locked
cabinet. Observe all warnings on
container labels to avoid personal
injury.
or
Turning the Cycle Selector knob
to an OFF position does
disconnect the appliance from
the power supply.
●
Keep the floor around your
appliances clean and dry to reduce
the possibility of slipping.
●
Do not operate this appliance
if it is damaged, malfunctioning,
partially disassembled, or has
missing or broken parts, including
a damaged cord or plug.
●
Do not dry fiberglass articles in
your dryer. Skin irritation could
result from the remaining glass
particles that may be picked up
by clothing during subsequent
dryer uses.
●
If yours is a gas dryer, it is
equipped with an automatic electric
ignition and does not have a pilot
light. DO
TO
INSTRUCTIONS
●
The laundry process can reduce
the flame of fabrics, To
avoid such a result, the garment
LIGHT WITH A
Burns
may result from having your hand
in the vicinity of the burner when
the
ignition may turn on.
How to operate your dryer
WARNING-To reduce the risk of fire. electric shock. or
to Persons,
read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
Five
Dye. with
Control
,x
Your Dryer Properly
Set the Controls
See the Controls Setting Guide
on pages 6 and 7.
sorted right for drying. See page 8
for sorting help. (If you do mix
various types of fabrics in your
load. set the controls for the
lighter-weight fabrics and remove
when dry. Reset controls for the
remaining heavier fabrics. )
●
Clean the lint filter each time the
dryer is used. Always be sure the
lint filter is in place. Don’t use the
without it.
Good sorting for the dryer begins
at the washer. Generally, if clothes
are sorted right for washing, they’re
4
What is the difference
Care Selections
Push a button to select the proper heat for your load.
between
&
Automatic drying?
Should be used with cycles indicated ●
Automatic,
Perm Press and
Knits Cycles
Timed Drying
Timed
Cycles
Automatic
Fabric Care
Selections
When using the TIMED CYCLES,
you select the number of minutes
you wish the dryer to run and it
turns off at the end of this time
period.
Regular Cycle
Cottons
●
●
●
●
●
High Heat
Perm Press
Medium Heat
●
●
Automatic Drying
Low Heat
When using the Automatic Cycles,
the Electronic Sensor Control
system continually senses the
moisture in the tumbling clothes,
determines when they are dried to
your pre-selected setting, and
terminates the cycle automatically.
Refer to the CONTROLS SETTING
GUIDE for recommended settings.
The Cycle Selector will not advance
until clothes have reached a certain
degree of dryness.
Fluff
No Heat
Select End of Cycle Signal, if
desired. (See below.)
@Extra Care Cycle
(Operates only with Automatic,
Perm Press& Knits Cycles.)
Turn to ON if desired. To minimize
set in the clothes, the Extra
Care cycle provides approximately
15 minutes of no-heat tumbling
after the clothes are dry.
Use End-of-Cycle Signal. Signal
will sound at five-minute intervals
to remind you to remove the clothes.
Turn Cycle Selector to desired
cycle setting. The selector may be
turned in either direction.
Press PUSH
START button
to start dryer. (Opening the door
during operation stops the dryer. To
close the door and press
the START button. )
Dryness selections guide for
the automatic cycles
Set to Middle Position
Polyester
Permanent Press
drying tips
&
End-of-Cycle Signal
(Operates with any cycle. )
●
DO NOT
Garments being dried or
should tumble freely.
●
For most normal loads.
Set toward MORE DRY
●
REMOVE
help prevent
wrinkling, remove from the dryer
promptly at the end of the drying
cycles.
The Signal control can be set
anywhere between OFF and
LOUD, depending on desired
sound level. The signal
sound
. For loads that include heavy-
weight fabrics.
●
PLACE ON
just before the end of the cycle to
remind you to remove the clothes.
To stop signal while sounding, turn
Signal control to OFF or advance
Cycle Selector to OFF.
Permanent Press and Polyester
Knit garments look best if placed
on hangers after drying.
●
If you desire to remove more
moisture.
Set toward LESS DRY
The Signal should always be used
when drying Polyester Knits or
Permanent Press items which
should be removed as soon as the
dryer stops to help prevent setting
of
●
●
For lightweight fabric loads.
If you desire to remove less
moisture.
The signal should also be used with
the Extra Care Cycle.
●
For very small loads.
5
Controls Setting Guide for different fabrics and loads
Fabric
Drying Se
Cycle Setting
Cycle
See Dryness Selection Guide on
page 5.
Cottons
High Heat
Automatic Regular Cycle
or
Cottons Linens
Timed Cycle
Set at
for dry; at
DAMP-DRY for ironing.
See Dryness Selection Guide on
page 5.
DE-WRINKLE setting to de-wrinkle
garments that have not been washed.
Permanent Press, Treated Cottons,
Blends with Cotton
Press
Medium Heat
Automatic Perm Press
and Knits Cycle
Timed Cycle
Automatic Perm Press
and Knits Cycle
See Dryness Selection Guide on
page 5.
Synthetics—Polyester, Nylon,
Acrylic Knits and Woven Fabrics
Perm Press
Sturdy
Medium Heat
Knits/Delicates
Low Heat
Delicate
Automatic Perm Press
and Knits Cycle
Set toward LESS DRY. See Dryness
Selection Guide on page 5.
Silks and Wools, Blends including
Silks and Wools
Knits/Delicates
Low Heat
Knits/Delicates
Low Heat
Automatic Perm Press
and Knits Cycle
Set toward LESS DRY. See Dryness
Selection Guide on page 5.
Rayon and Acetate
Down-filled garments, if machine
washing and drying are
recommended.
Automatic Regular Cycle
Cottons
High Heat
Baby Clothes—Sturdy: Diapers,
Nightgowns, Shirts, Pads, Sheets,
Receiving Blankets, Coveralls. See
Special Instructions.
Automatic Regular Cycle
Cottons
High Heat
Baby Clothes—Delicate
Knits/Delicates
Low Heat
Automatic Perm Press
and Knits Cycle
Set toward LESS DRY.
Set at 20 to 25 minutes
Blankets—Wool, Part Wool,
Cotton, Electric, Synthetic. See
below under “Extra-large
Timed
Cottons
High Heat
For first setting, set at 20 minutes;
for second setting, set at 15 minutes.
Timed Cycle
Curtains, Slipcovers, Draperies.
Cottons
High Heat
DO
MACHINE DRY
FIBERGLASS.
First setting— 20 minutes;
additional settings—5 minutes.
Timed Cycle
Timed Cycle
Chenille Bedspreads, Robes.
below under “Extra-large
Cottons
High Heat
Set for time desired.
Rubber-coated Items, Laminated
Fabrics, Vinyl, Plastics and
Articles with Plastic Trim.
Fluff
No Heat
Timed Cycle
Timed Cycle
First setting—20 minutes;
additional settings—5 minutes
and Rugs
Cottons
High Heat
First setting—20 minutes;
second setting—15 minutes;
additional settings—5 minutes.
Extra-large
or King
Permanent Press
Medium Heat
Size Sheets, Blankets or Spreads,
Sleeping Bags, Insulated Jackets or
Suits, Mattress Covers (Pads),
Quilted Bedspreads.
Pillows—Feather and
Timed Cycle
Set at 70 minutes.
Cottons
filled (if manufacturer recommends
they be dried in a dryer). See
Special Instructions.
High Heat
*The terms High, Medium and Low Heat are those usually found on fabric care labels. For best results, follow your fabric care labels.
The Cycle Selector settings indicated are to be used as a guide. You may find that best results are obtained for certain of your fabrics
by setting the Selector to either side of the recommended settings.
6
Instructions
Do not dry non-colorfast items with whites or light-colored items.
Do not overload dryer; clothes should tumble freely. Remove promptly as soon as dryer stops; place clothes on hangers to
minimize wrinkling.
Do not overload dryer; clothes should tumble freely. Remove promptly as soon as dryer stops, place clothes on hangers to
minimize wrinkling.
Dry silks and wools in your dryer only if recommended by the garment manufacturer. Follow instructions carefully.
Tumble drying is
Down must be thoroughly dried to remove odor and prevent mildewing. Place two large, dry towels in the
dryer to improve tumbling and shorten drying time. Be sure to dry thoroughly.
IMPORTANT. If children’s
is made of
tumble dry only on Low/Knits. Normal Heat can damage these fabrics.
Check manufacturer’s drying instructions.
See above instructions.
Place in dryer with 3 or 4 dry towels which have been heated for 5 minutes. Set timer for 20 to 25 minutes. Do not set control for more than
25 minutes. Do one blanket at a time. Remove blanket at end of cycle and block blanket back to original shape. Press binding with warm
iron. Allow to dry before storing.
Use dry
as buffers. Set timer for 20 minutes. If items are still wet, reset for 15 minutes and check again. Items should be removed while
damp.
for excess
slipcovers on furniture immediately. Hang draperies and curtains so that creases will
Remove and restart dryer.
out. Stop dryer periodically and check
on FLUFF (No Heat) setting as heat may cause alteration in shape, color and appearance of such articles.
Stop dryer periodically and check filter for excess
Remove and restart dryer.
must be taken for extra-large items. Set dryer for
again; and 5 minutes for each additional setting. Make sure that article does not fill drum. Many large articles,
dryer, but as they dry and fluff up may not have room to tumble. Check carefully every few minutes and if article is still wet or damp and fills
dryer, finish drying on Do not, under any circumstances operate dryer for longer times without checking. CAUTION: If large items do not
have room to tumble, the air flow maybe blocked which could result in scorching your valuable items. Many large items, shag rugs, cannot
be dried in borne size dryers. DO dry jackets containing Kapok. (See cleaning instructions above.)
Set 15 minutes for second setting, check
wet, have ample room in
Check ticking for or weak seams where feathers or filling could escape. Dry no more than one at a time and set dryer for maximum
time. Stop dryer occasionally and shake pillows to redistribute filling for more even drying. Check pillows at end of drying time. If are not
completely dry, return them to dryer and reset for more drying time. Feather pillows dry very slowly and must be dried completely to prevent
mildewing. DO dry pillows containing
—
Refer to Garment Manufacturers’ Care
For more information on care labeling, send for “What’s New About CARE
For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington,
20402.
7
How to
the clothes
Normally, if you have sorted clothes correctly for washing,
you will also have properly sorted drying loads.
Sort by
Sort by color
Sort by fabric
w
from
from
from
from
from
from
from
LINT PRODUCERS—such as
terry toweling and chenille—give
up lint. LINT
such as man-made fibers and
napped fabrics like velveteen and
corduroy—attract lint, and must be
dried separately.
In addition to sorting to reduce lint
collection, it is recommended that
fabrics of similar construction be
dried together whenever possible.
Sort by
from
For information on tumble drying
extra-large items and different
fabrics and loads, see pages 6 and 7.
8
How to load the
clothes
Don’t overload your dryer.
Crowded loads don’t dry efficiently
and clothes may be unnecessarily
Clean the lint filter before
drying every load.
Clean lint filter (see shaded area)
by putting your moistened fingers
at the corner of filter and wiping in
a downward motion all the way
across to the other corner.
Loads should look like this:
Drum with
Permanent Press Load
with
Cottons & Linens
Lint Filter
For additional information on lint
filter, see page 13.
●
Sort clothes by weight so you won’t
●
To help prevent ironing, use
●
Clean dryer lint filter each time
have to run an extra cycle for one or
two heavier, slower-drying items.
See page 8.
Press (Medium) or
garments promptly
at end of drying cycle and place on
hangers.
once a year. A partially clogged
exhaust can lengthen drying time.
●
Do not overload dryer. For
efficient drying, clothes need to
tumble freely.
. Dry your clothes in consecutive
loads. Using a “warm” dryer will
save energy.
●
Use Automatic Drying Cycles
whenever possible to help prevent
overdying and to save energy.
9
Solver
.
POSSIBLE CAUSE AND REMEDY
PROBLEM
●
Dryer unplugged. Make sure power cord is plugged in.
DRYER WON’T
●
No power to dryer. Check fuses and circuit breakers to make sure dryer is getting
current. Most electric dryers use two.
●
Controls improperly set. Make sure controls are set and START switch is pushed.
Opening the door during operation stops the dryer. Tore-start, close the door and push
the switch.
. Dryer door is open. Close door securely—dryer will not run with door open.
●
Circuit is overloaded. Do not operate other appliances on the same electrical outlet
or circuit while the dryer is operating.
●
Controls improperly set. Check all controls to make sure they are correctly set for
TAKE
the load you want to dry. Seepages 4-7.
LONG
DRY
. Clogged lint filter. Remove and clean filter before every load.
under lint filter with vacuum cleaner. See page 13.
clean area
●
ducting. Make sure dryer is
in accordance with Installation
Instructions.
●
Obstruction in exhaust ducting. Make sure ducting is clean and free of obstruction;
make sure damper in outside wall cap operates easily. If flexible ducting is used, be
sure it is not kinked and is properly installed according to Installation Instructions.
●
Blown fuses or tripped circuit breakers. Check household fuses or circuit breakers.
Most electric dryers use two. It is possible for one to be blown or trip@ and the dryer
still tumble without heat.
. Improper sorting. Do not mix heavy, hard-to-dry items with lightweight articles.
●
Large loads of moisture-holding fabrics, such as beach towels, take a long time to
remove moisture.
●
●
Too many items in dryer. Dry only one washer load at a time. Do not combine loads.
few items in dryer. If drying only one article, add two more similar articles, even
if dry, to insure proper tumbling.
●
Some fabrics
and drip dried; others may be safely washed but will shrink in a dryer. Follow Garment
Manufacturers’ Care Labels If in doubt, do not machine wash or tumble dry.
shrink whether machine washed and tumble dried or washed by hand
GENERAL
10
POSSIBLE CAUSE AND REMEDY
PROBLEM
●
have been improperly
the manufacturer. When this occurs, garment maybe pressed back into
shape after each wash dry cycle.
KNITS
and
●
delayed shrinkage is caused when starch or sizing (in
removal by laundering. Maybe noticed in older garments that have been
laundered many times without previous
as for
.
Shrinkage caused by overheating occurs in certain knit fabrics that have
shaped. When washing, drying or ironing temperatures exceed
temperatures used to
shape set, shrinkage may occur. This cannot be corrected, but it can be prevented by
washing in cold or warm water; drying on low heat.
●
Leaving clothes in dryer after tumbling stops. Remove clothes promptly and hang
them immediately.
PERMANENT PRESS
AND “NO-IRON”
ITEMS
. Too many items in dryer. Dry only one washer load at a time. Do not combine loads.
●
Too few items in dryer. If drying only one article, add two or more similar articles, even
if dry, to insure proper tumbling.
Improper loads. Avoid laundering heavy Permanent Press items, such as work clothes,
with lighter Permanent Press items, such as shirts or blouses. Do not wash or dry
Permanent Press with regular laundry.
●
Too many clothes in washer. Items must have room to move freely. Permanent Press
loads should always be smaller than regular loads.. more than medium loads.
●
Use of incorrect wash and dry cycles. Use Permanent Press Wash Cycle which provides
a cool-down rinse to minimize
Also, use Permanent Press Dry Cycle.
●
load; medium level
for small load.
water with plenty of detergent.
●
Washing repeatedly in
hot water. Wash in cool or
11
Care and Cleaning
USER MAINTENANCE
INSTRUCTIONS
CAUTIONS:
Before having your
●
dryer
connected in your new residence,
be sure your licensed electrician
confirms that the supply voltage
matches the voltage specified on
the rating plate.
dryer care
The Drum. Porcelain enamel
drum is rust-resistant and requires
no special care.
●
Dryer control panel and finishes
The Exterior. Wipe off any spills or
washing compounds. Wipe or dust
with damp cloth. Try not to strike
the surface with sharp objects.
may be damaged by some laundry
pretreatment soil and stain remover
products if such products are
sprayed on or have direct contact
with the dryer.
The Lint Filter. Wipe lint filter
before every use as described on
page 9. Periodically lint filter
should be removed and suction
hose from vacuum cleaner should
be inserted into the opening.
See below.
Apply these pretreatment products
away from the dryer. The fabric
may then be washed and dried
normally. Damage to your dryer
caused by pretreatment products is
not covered by your warranty.
Do not obstruct the
of
combustion and ventilating air,
Dryer Exhaust: Inspect and clean
the dryer exhaust
once a year.
at least
To store dryer: For short period of
time, disconnect power supply and
clean lint filter.
Do not store dryer where it will be
exposed to the weather.
13
Be Th ere
With “the purchase of your new GE appliance, receive the
assurance that if you ever need information or assistance
from GE, we’ll be there.
you have to do is cdl—toll-free!
Centera
Whatever your question about any GE
major appliance, GE Answer
information service is available to
help. Your cdl—and your
will be answered
courteously And you can
and
any
time.
Answer
service is
open 24 hours a
7 days a week.
In-Home
Service Contracts
Service
880-GE-CARES
You can have the secure feeling that
GE Consumer Service will
be
there after your warranty expires. Pur-
chase a GE contract while your war-
ranty is still in effect and you’ll receive
a substantial discount. With a
year contract, you’re assured of future
service at today’s prices.
AGE Consumer Service professional
will provide expert repair service,
scheduled at a time that’s convenient
for you. Many GE Consumer Service
company-operated locations offer
today or tomorrow, or at your
convenience
a.m. to
a.m. to
p.m.
p.m. Satur-
days). Our factory-trained technicians
know your appliance inside and
so most repairs can be
one visit.
in just
to ser vice th eir
a p p lia n ces ca r t have needed
For Customers
Special Needs...
parts or accessories sent
their home, free of shipping charge!
The GE system provides access
to
to over 47,000 parts.. and
Genuine Renewal Parts are
GE
Upon request, GE will provide Braille
controls for a variety of GE
warranted.
MasterCard and
Discover cards are accepted.
User maintenance instructions
and a brochure to assist in planning a
barrier-free kitchen for persons with
limited mobility To obtain these
contained in this
cover
in ten d ed to be p er for m ed by
free of charge,
800.626.2000.
a n y u ser . Oth er ser vicin g
Consumers with impaired hearing
or speech who have access to a
or a conventional teletypewriter may
(800-833-4322)
be r efer r ed to
ser -
vice p er son n el. Ca u tion m u st be
exer cised , sin ce im p r op er ser vicin g
m a y ca u se u n sa fe op er a tion .
to request information or service.
YOUR GE AUTOMATIC CLOTHES DRYER
WARRANTY
Save proof of original purchase date such as your sales slip or
check to establish warranty period.
FULL ONE-YEAR WARRANTY
This warranty is extended to
WHAT IS COVERED
the original purchaser and any
succeeding owner for products
purchased for ordinary home use
in the 48 mainland states, Hawaii
For one year from date of original
purchase, we will provide, free of
charge, parts and service labor
in your home to repair or replace
and Washington,
In Alaska the
of
dryer that fails
warranty is the same except that it
is LIMITED because you must pay to
ship the product to the service shop
or for the service technician’s travel
costs to your home.
because of a manufacturing
defect.
All warranty service will be provided
by our Factory Service Centers or
by our authorized Customer Care”
servicers during normal working
hours.
Look in the White or Yellow Pages
of your telephone directory for
GENERAL ELECTRIC COMPANY,
GENERAL ELECTRIC FACTORY
SERVICE, GENERAL
FACTORY SERVICE or
GENERAL ELECTRIC CUSTOMER
CARE@ SERVICE.
. Replacement of house fuses or
resetting of circuit breakers.
WHAT IS NOT COVERED “
teach you how to use the product.
Read your Use and Care material.
If you then have any questions
about operating the product,
please contact your dealer or our
Consumer Affairs office at the
address below, or call, toll free:
●
Failure of the product if it is used
for other than its intended purpose
or used commercially.
Damage to product caused
by accident, fire, floods or acts
of God.
GE Answer Center”
800.626.2000
consumer information service
WARRANTOR IS NOT RESPONSIBLE
FOR CONSEQUENTIAL DAMAGES.
●
Improper installation.
If you have an installation problem,
contact your dealer or installer.
You are responsible for providing
adequate electrical, exhausting
and other connecting facilities.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor: General Electric Company
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
r
No. 113
Pub. 49-9651
6-90
|