FUJITSU LIFEBOOK T1010 02 User Manual

LED Indicators  
LifeBook Security/  
Tablet PC Buttons  
Please refer to Table 1  
The five security/Tablet PC  
buttons are located on the  
bottom right-hand side of the  
display when it is configured  
to be used as a notebook.  
LEFT PANEL  
Getting started with your new Fujitsu  
Button Icon and Name  
(Primary)  
LifeBook® T1010 Tablet PC  
Microphone Jack  
Air Vents  
PC Card Slot  
This convenient guide will lead you through the start-up process in eight easy steps and will also offer some valuable tips.  
USB 2.0 PC Card Slot Eject Button  
Port  
Display Latch  
Pen Garage  
Power  
Optional Webcam  
Pen Tether  
Attachment  
Point  
DC Power Jack  
Security functions: All five  
buttons are used when implementing  
security functions. Four of the  
buttons are used to enter the  
password, and the fifth is used  
as an Enter button.  
Scroll Sensor  
(for Tablet Mode)  
External Power  
Display Panel  
Headphone Jack  
Memory Stick/  
SD Card Slot Smart Card Slot  
Optical/Hard  
Drive Access  
LifeBook Security/Tablet PC  
Buttons  
Tablet PC functions: The Tablet  
PC buttons have a number of  
functions, depending upon the  
state of the system: pre-logon  
state or post-logon state.  
Built-in Microphone  
RIGHT PANEL  
Touchpad Cursor Control  
Power Suspend/Resume  
Switch  
Battery 1 Charging  
Battery 1 Level  
Battery 2 Charging  
Battery 2 Level  
NumLk  
Left Button  
The system is pre-logon when the  
Windows logon screen is displayed;  
the system is post-logon when the  
Windows desktop is displayed.  
All five of the buttons have primary  
functions. Several of the buttons  
also have secondary functions  
(see chart) when used as  
Right Button  
Status Indicator Panel  
Scroll Strip  
Keyboard  
Status Indicator Panel  
Wireless Device On/Off Switch  
Anti-Theft Lock Slot Optical Drive  
application buttons and are  
activated by pressing the Function  
(Fn) button while pressing the  
application button. In post logon,  
the secondary functions of the  
Application A and B buttons  
can be changed to launch any  
application. See User’s Guide for  
more information about using the  
Security/Application Buttons.  
1. What’s in the Box  
4. Installing Click Me!  
Check to see that all of the following are in the box:  
Check to be sure the wireless device switch is on.  
For Genuine Microsoft® Windows® XP Tablet PC: The first time  
m
m
m
m
m
LifeBook T Series Tablet PC  
AC adapter and power cable  
Lithium ion battery (pre-installed)  
Drivers and Application CD  
Warranty Terms & Conditions Booklet  
m
m
m
m
m
Microsoft associated discs  
Pen tether  
Restore disc  
Microfiber Cleaning Cloth  
Third party application discs  
BACK PANEL  
you boot up your system, you will see an icon called Click Me!  
in the Start menu.  
For Genuine Windows Vista®: In addition to an icon on the  
desktop, a dialog box will automatically open that prompts  
you to run Click Me!. Please proceed with ClickMe! to  
complete the system initial installation.  
When you click the Click Me! icon, your system will automatically  
build the icon tray in the bottom right of the screen. These icons  
provide links to utilities that you will frequently access.  
CLICK ME  
2. Turn on Your Tablet PC  
Plug the AC adapter into your Tablet PC.  
Plug the power cord into the AC adapter.  
CapsLk  
Anti-Theft Lock Slot  
Modem (RJ-11) Jack  
USB 2.0 Port  
Drivers  
Connect the power cord to an electrical outlet.  
Connect phone cord or Ethernet cable to your  
Tablet PC and to a wall jack.  
Press the Suspend/Resume switch to turn on the Tablet PC.  
The Tablet PC is now on and the battery is being charged.  
The Tablet PC will begin a power-on self test.  
Once the self test is successfully completed, the operating  
system will begin the initialization process.  
Air Vents  
ScrLk  
Look for the latest drivers on  
the Drivers and Applications  
CD. Right-click the FDU icon  
and select “update”, or go to  
us.fujitsu.com/computers.  
5. Register Your Tablet PC  
Register your Tablet PC with Fujitsu Service and Support  
via our website (us.fujitsu.com/computers).  
USB 2.0 Port  
Security  
External Video Port  
Gigabit LAN (RJ-45) Jack  
3. Register  
Security Panel Button Functions  
(System State—pre-boot or resuming from suspend)  
For Genuine Microsoft® Windows® XP Tablet PC: After the operating  
system has initialized, accept the Microsoft® Windows® Licensing  
Agreement and the Fujitsu End User License Agreement to proceed.  
Then enter the information as prompted to personalize your notebook  
and configure your modem* to dial.  
6. Convert from Notebook  
7. Installing Additional  
Top Latch  
B Display Side  
Security  
Button 1  
Security  
Button 2  
Security  
Button 3  
Security  
Button 4  
Security  
Enter  
Button  
to Tablet  
Software  
Lift the display until it is perpendicular to  
the keyboard.  
Load the Drivers and Applications disc to check  
for the latest versions of pre-installed drivers and  
applications. Install additional applications not  
pre-installed on your system, such as CyberLink  
Power Director and Make Disc (on select models).  
Pre-logon Tablet PC Button Functions  
(System State – pre-logon (Windows logon screen is displayed)  
Carefully rotate the display clockwise or counter  
clockwise until it is facing backwards.  
Holding the top edge of the display panel, push  
it down until it is nearly on top of the keyboard.  
Push the display latch down (the latch will pivot  
clockwise). The top latch disappears, and the  
bottom latch appears (A).  
For Genuine Windows Vista®: Accept the Microsoft® Windows®  
Licensing Agreement and the Fujitsu End User License Agreement  
to proceed. Select your User ID and Password during the “Welcome  
Screen.” Keep a record of your User ID and password stored in a  
secure place. THE SCREEN WILL GO DARK FOR APPROXIMATELY  
TWO MINUTES. Do not attempt to turn power on or off  
during this stage.  
Notebook  
Function  
<Tab>  
<Enter>  
Rotate  
Screen  
Used to  
invoke  
Ctl+Alt+Del  
Button  
Bottom Latch  
A Display Side  
secondary  
function  
Secondary  
Functions  
(Fn+ Button)  
<Shift>  
<Tab>  
<Escape>  
None  
None  
None  
8. Additional instructions  
for WWAN (Wireless  
Wide Area Network)  
Post-logon Tablet PC Button Functions  
(System State – pre-logon (Windows logon screen is displayed)  
If you have:  
You will need to install  
the following software:  
Holding the latch down, gently push down on  
the display until the latch engages.  
Primary  
Notebook  
Function  
Page  
Down  
Page  
up  
Rotate  
Screen  
Secondary  
function  
Ctl+Alt+ Del  
Button  
Dual-Layer  
Multi-Format  
DVD Writer  
CyberLink  
Power Director  
and Make Disc  
model  
To return to a notebook configuration, press the  
latch release button, and raise the screen until  
it is perpendicular to the keyboard. Be sure to  
turn the display in the direction indicated by the  
display rotation light and push the display latch  
so it faces forward (B).  
Selection  
If your system comes with a built-in Mobile  
Broadband module, please follow the  
installation and activation instructions,  
which are included in a separate package  
with your LifeBook Tablet PC.  
Secondary  
Functions  
User-  
defined  
User-  
Defined  
Application  
B (Default =  
MS Journal)  
Display  
Fujitsu  
Menu  
Utility  
None  
Switching:  
1. LED only  
2. CRT only  
3. Dual  
(Fn+ Button) Application  
A (Default =  
Calculator)  
Display  
Table 1  
* Wireless WAN model does not come with modem.  

Tru Test 1 J User Manual
NEC MULTISYNC EA245WMI User Manual
Mpc Atd Actuator 50 Atd 313186 User Manual
Millennium Enterprises Air Conditioner Z33 User Manual
Lanier 5622 Ag User Manual
HITACHI 43FDX15B User Manual
FUJITSU FI 7140 User Manual
D LINK AC750 DAP 1530 User Manual
CRAFTSMAN 358.356100 User Manual
ACER ASPIRE E1 731G User Manual