DENON DRA 297 User Manual1

AM-FM STEREO RECEIVER

DRA-297

OPERATING INSTRUCTIONS

ENGLISH

¢NOTE ON USE

FCC INFORMATION (For US customers)

1. PRODUCT

This product complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this product may not cause harmful

interference, and (2) this product must accept any interference received,

including interference that may cause undesired operation.

2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT

This product, when installed as indicated in the instructions contained in this

manual, meets FCC requirements. Modification not expressly approved by

DENON may void your authority, granted by the FCC, to use the product.

3. NOTE

• Do not let foreign objects into the apparatus.

This product has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

• Keep the apparatus free from moisture, water, and

dust.

• Avoid high temperatures.

Allow for sufficient heat dispersion when installed

in a rack.

This product generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

product does cause harmful interference to radio or television reception,

which can be determined by turning the product OFF and ON, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Do not let insecticides, benzene, and thinner come

in contact with the apparatus.

• Increase the separation between the equipment and receiver.

• Connect the product into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the local retailer authorized to distribute this type of product or

an experienced radio/TV technician for help.

• Unplug the power cord when not using the

apparatus for long periods of time.

• Handle the power cord carefully.

Hold the plug when unplugging the cord.

• Never disassemble or modify the apparatus in any

way.

* (For apparatuses with ventilation holes)

• Do not obstruct the ventilation holes.

ENGLISH

Thank you for choosing the DENON DRA-297 AM-FM Stereo Receiver. This remarkable component has been engineered to provide outstanding high fidelity reproduction of your favorite music sources.

As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding.

Contents

Getting Started

Operation

Operating the remote control unit

Before operating···········································································12

Playing the input source······························································12

Turning the sound off temporarily (MUTING)·······························12

Listening over headphones··························································12

Switching the speakers································································12

Checking the currently playing program source, etc. ··················13

Switching the brightness of the display·······································13

Selecting the play mode (PURE DIRECT) ····································13

Setting the tone control ·······························································13

Adjusting the speaker volume ·····················································13

Combining the currently playing sound

Accessories······················································································2

Before using ····················································································2

Cautions on installation·································································2

About the remote control unit······················································3

Inserting the batteries····································································3

Operating range of the remote control unit································3

Part names and functions

Front panel ·····················································································4

Display····························································································4

Rear panel ······················································································5

Remote control unit ···································································5, 6

Operating DENON audio components ·······································19

Setting the preset memory function··········································19

Operating a component stored in the preset memory····20 ~ 22

Setting the punch through function···········································23

Troubleshooting············································································

Specifications················································································

with the desired image (VIDEO SELECT function)····················13

Listening to the radio···································································14

Auto preset memory····································································14

Auto tuning···················································································14

Manual tuning ··············································································14

Preset memory ············································································14

Recalling preset stations······························································14

XM Satellite Radio········································································15

Checking the XM signal strength and Radio ID···························15

Channel selection·········································································16

Category search ···········································································16

Direct access of channels····························································16

Connections

Cable indications ············································································6

Speaker connections······································································7

Connecting a DVD player and monitor ········································8

Connecting a TV/DBS tuner··························································8

Connecting a CD player ·································································8

Connecting a tape deck, CD recorder or MD recorder················8

Connecting a VCR···········································································9

Connecting the antenna terminals ···············································9

Connecting the XM terminal·······················································10

Connecting the iPod ··································································10

Playing the iPod ·········································································16

Connecting a room-to-room remote control unit·····················11

Connecting the PRE OUT terminals············································11

Connecting the power supply cord ············································11

Setting the iPod Assignment ·······················································16

Listening to music········································································17

Listening to music in the Browse mode······································17

Viewing still pictures and videos (only for iPods

equipped with the slideshow / video function)····························18

Disconnecting the iPod ································································18

Recording the program source

(recording the source currently being monitored)····················18

About the memory functions······················································18

Initialization of the microprocessor············································18

ENGLISH

Getting Started

Accessories

Before using

Cautions on installation

Check that the following parts are attached in addition to the main Pay attention to the following before using this unit:

Note:

unit:

For heat dispersal, do not install this unit in a confined space

such as a bookcase or similar enclosure.

• Moving the unit.

To prevent short-circuits or damaged wires in the connection cables,

q Operating instructions ..............................................................1

w Warranty (for North America model only).....................................1

e Service station list ....................................................................1

r Remote control unit (RC-1053).................................................1

t R6P/AA batteries ......................................................................2

y AM loop antenna......................................................................1

u FM indoor antenna ...................................................................1

always unplug the power supply cord and disconnect the connection

cables between all other audio components when moving the unit.

Note

• Cautions on using mobile phones.

Using a mobile phone near this unit may result in noise. If so, move

the mobile phone away from this unit when it is in use.

• Before turning the power operation button on.

Check once again that all connections are correct and that there are

not problems with the connection cables. Always set the power

operation button to the standby position before connecting and

disconnecting connection cables.

• Store the operating instructions in a safe place.

After reading the operating instructions, store them in a safe place

as they could come in handy in the future.

Wall

• Whenever the power operation button is in the STANDBY state,

the unit is still connected to AC line voltage.

Please be sure to turn off the power operation button or unplug

the cord when you leave home for, say, a vacation.

• Note that the illustrations in these instructions may differ from

the actual unit for explanation purposes.

ENGLISH

Getting Started

About the remote control unit

Operating range of the remote control unit

• Point the remote control unit at the remote sensor when operating

it.

• The remote control unit can be used from a distance of approximately

23 feet/7 meters, at a horizontal angle of up to 30° with respect to

the sensor.

In addition to controlling the DRA-297, the attached remote control

unit (RC-1053) can also be used to control the following products:

q DENON component products

w Component products other than DENON:

• Set using the preset memory function (

page 23).

Inserting the batteries

q Remove the remote control

w Set two R6P/AA batteries in

the battery compartment in

the indicated direction.

unit’s rear cover.

30°

Approx. 23 feet/7 m

NOTE:

• It may be difficult to operate the remote control unit if the remote

sensor is exposed to direct sunlight or strong artificial light.

e Put the rear cover back on.

Notes on batteries:

• Replace the batteries with new ones if the set does not operate

even when the remote control unit is operated nearby the unit.

(The attached batteries are only for verifying operation.)

• When inserting the batteries, be sure to do so in the proper

direction, following the “<” and “>” marks in the battery

compartment.

• To prevent damage or leakage of battery fluid:

• Do not use a new battery together with an old one.

• Do not use two different types of batteries.

• Do not short-circuit, disassemble, heat or dispose of batteries

in flames.

• Remove the batteries from the remote if it will not be in use for

long periods.

• If the battery fluid should leak, carefully wipe the fluid off the

inside of the battery compartment and insert new batteries.

• When replacing the batteries, have the new batteries ready and

insert them as quickly as possible.

ENGLISH

Getting Started

Part names and functions

Display

For details on the functions of these parts, refer to the pages given in parentheses ( ).

y t r

Front panel

@ @@

@@!

Signal channel indicator

Lights when the preset channel is displayed at

AUTO indicator

This lights when the broadcast station is

selected in the AUTO tuning mode.

Information display

TUNED indicator

This lights when an FM/AM broadcast has been

received.

Volume indicator

This displays the volume level.

STEREO indicator

This lights when an FM stereo broadcast has

been received.

q w e r y u io!! !

! ! ! ! !

SELECT knob········································(13, 17)

CH VOL button···········································(13)

ENTER button ······································(17, 18)

VOLUME control knob······························(12)

MUTING button·········································(12)

DIMMER button·········································(13)

VIDEO SELECT button ······························(13)

TUNING buttons (•, ª) ·····························(14)

Display

Power operation button

(ON/STANDBY)··········································(12)

Power indicator ·········································(12)

Power switch ·······································(12, 18)

Headphones jack (PHONES)·····················(12)

MODE button·······································(14, 18)

SPEAKER buttons······································(12)

PURE DIRECT button·································(13)

SHIFT button··············································(14)

XM RADIO button······································(16)

TONE DEFEAT button ·······························(13)

LOUDNESS button····································(13)

STATUS button··········································(13)

MENU button·······································(16, 17)

TONE CONTROL button····························(13)

PRESET buttons·········································(14)

MEMORY button········································(14)

Remote control sensor································(3)

BAND button··············································(14)

INPUT SELECTOR knob ····························(12)

ENGLISH

Getting Started

Rear panel

Remote control unit

[ Front ]

Remote control signal

transmitter························(3)

! ! ! !

Indicator ··························(19)

Power buttons················(12)

SHIFT buttons·················(14)

CHANNEL buttons ·········(14)

Input source selector

buttons····························(12)

w e r t

System buttons········(20, 23)

Volume control

AUDIO OUT terminals·································(8)

SUBWOOFER PRE OUT terminal·············(11)

AUDIO IN terminals·····································(8)

PRE OUT terminals····································(11)

VIDEO IN terminals ·····································(8)

Speaker terminals ·······································(7)

AC outlets···················································(11)

Power supply cord·····································(11)

VIDEO OUT terminals ·································(8)

DOCK CONTROL jack ································(10)

XM terminal ···············································(10)

ANTENNA terminals ···································(9)

REMOTE CONTROL jacks ·························(11)

buttons····························(12)

MUTING button··············(12)

DIMMER button··············(13)

ENTER button···········(17, 18)

MENU button ···········(16, 17)

Cursor buttons

(D, H, F, G)············(16 ~ 18)

STATUS button ··············(13)

VIDEO SELECT

button······························(13)

PURE DIRECT/SET UP

button······························(13)

Mode selector

switches····················(12, 19)

NOTE:

• If buttons on the front or rear are pressed strongly, the button on the opposite side will be activated

too.

ENGLISH

Getting Started

[ Rear ]

Connections

Cable indications

The hookup diagrams on the subsequent pages assume the use of the following optional connection

cables (not supplied).

Power buttons················(20)

Signal direction

Audio cable

Number buttons

(0 ~ 9, +10) ················(14, 20)

Audio signal

Analog connections (Stereo)

(White)

OUT

(Red)

BAND button ··················(14)

Video signal

Pin-plug cable

Memory block

buttons (A ~ G)···············(14)

Analog connections (Monaural, for subwoofer)

MODE button············(14, 18)

OUT

Input source selector

buttons····························(12)

MEMORY button ············(14)

Pin-plug cable

TUNING buttons ············(14)

Speaker connections

Speaker cable

Video connections

(Yellow)

Video cable (75 Ω/ohms video pin-plug cable)

NOTE:

• Do not plug in the power supply cord until all connections have been completed.

• When making connections, also refer to the operating instructions of the other components.

• Be sure to connect the left and right channels properly (left with left, right with right).

• Do not bundle power cords together with speaker cables. Doing so could result in humming or noise.

NOTE:

• If buttons on the front or rear are pressed strongly, the button on the opposite side will be activated

too.

ENGLISH

Connections

¢Connections

Speaker connections

• When making connections, also refer to the operating instructions of the other components.

Connect the speaker terminals with the speakers

making sure that like polarities are matched (

¢Speaker impedance

with

with ).

< >

Subwoofer

Speaker

A, B

Impedance

4 ~ 16 Ω/ohms

8 ~ 16 Ω/ohms

Connection terminal for

subwoofer with built-in

amplifier.

NOTE:

A+B

When making connections, take care that

none of the individual conductors of the

speaker cable come in contact with adjacent

terminals, with other speaker cable

conductors, or with the rear panel and

screws.

NEVER touch the speaker terminals when

the power is on. Doing so could result in

electric shocks.

Note on speaker impedance

When using speakers with an impedance

below the designated value (for example 4

Ω/ohms), playing for long periods of time with

the volume high could cause the temperature

to rise, activating the protection circuit.

When the protection circuit is activated, the

output to the speakers is cut off and the power

indicator blinks. If this happens, unplug the

power cord, wait for the set to cool off and

improve ventilation around the unit. Also check

the wiring of the input cables and the speaker

cables. After doing this, plug the power cord

back in and turn the unit’s power back on.

If the protection circuit is activated again even

though there are no problems with the wiring or

the ventilation around the unit, switch off the

power and contact a DENON service center.

Connecting the speaker cables

1. Loosen by turning

counterclockwise.

Either tightly twist or terminate the core

wires.

2. Insert the cable.

3. Tighten by turning clockwise.

( )

(

)

( )

(

)

Connecting banana plugs

Turn clockwise to tighten, then

insert the banana plug.

Speakers

(B)

Speakers

(A)

ENGLISH

Connections

Connecting a DVD player and monitor

Connecting a CD player

Monitor

VIDEO

CD player

AUDIO OUT

DVD player

VIDEO

OUT

AUDIO OUT

Connecting a tape deck, CD recorder or MD recorder

• Connect a non-DVD video disc player (such as a laser disc, VCD/SVCD, or future high definition disc

player) to the DVD/VDP terminals in the same way.

Tape deck/

CD recorder/

MD recorder

AUDIO IN

Connecting a TV/DBS tuner

AUDIO OUT

TV/DBS tuner

VIDEO

OUT

AUDIO OUT

ENGLISH

Connections

Connection of AM antennas

¢AM loop antenna assembly

Connecting a VCR

1. Push the lever.

Connect to the AM

antenna terminals.

Video deck

VIDEO

Remove the vinyl tie

and take out the

connection line.

VIDEO

OUT

2. Insert the conductor.

3. Return the lever.

Bend in the reverse

direction.

AUDIO OUT

a. With the antenna on

top any stable

surface.

Mount

AUDIO IN

b. With the antenna

attached to a wall.

Installation hole Mount on wall, etc.

Connecting the antenna terminals

NOTE:

Note to CATV system installer:

An F-type FM antenna cable plug can be connected directly.

• Do not connect two FM antennas

simultaneously.

This reminder is provided to call the CATV

system installer’s attention to Article 820-40 of

the NEC which provides guidelines for proper

grounding and, in particular, specifies that the

cable ground shall be connected to the

grounding system of the building, as close to

the point of cable entry as practical.

• Even if an external AM antenna is used, do

not disconnect the AM loop antenna.

• Make sure the AM loop antenna lead

terminals do not touch metal parts of the

panel.

Direction of broadcasting station

FM antenna

AM loop antenna

(Supplied)

75 Ω/ohms Coaxial

cable

FM indoor antenna (Supplied)

AM outdoor antenna

Ground

ENGLISH

Connections

Connecting the XM terminal

Connecting the iPod

• DRA-297 is the XM Ready receiver. You can receive XM Satellite Radio by connecting to the XM

Mini-Tuner and Home Dock (includes home antenna, sold separately) and subscribing to the XM service.

• Plug the XM Mini-Tuner Home Dock into XM terminal on the rear panel.

When using an iPod, you must connect the Control Dock for iPod (ASD-1R, sold separately) and the DOCK

CONTROL jack on the DRA-297 with a mini-jack and assign the iPod to any AUDIO terminal(s).

The diagram below shows an example of connections for when the iPod is assigned to the CD-R/TAPE

terminals.

• Position the Home Dock antenna near a south-facing window to receive the best signal.

For details, see “XM Satellite Radio” (

When making connections, also refer to the operating instructions of the XM Mini-Tuner and Home

Dock.

page 15).

For instructions on assigning the iPod to a specific terminal, see “Setting the iPod Assignment” (

page 16).

For instructions on playing the iPod, see “Playing the iPod” (

page 16).

XM Mini-Tuner and

Home Dock

iPod

AUX OUT

M X

ASD-1R

NOTE:

• Keep the power supply cord unplugged until the XM Mini-Tuner and Home Dock connection have

been completed.

AUDIO OUT

Monitor (S VIDEO IN)

• The XM name and related logo are registered trademarks of XM Satellite Radio Inc. All rights

reserved.

• The optional standard Control Dock for iPod is DENON ASD-1R sold separately.

ENGLISH

Connections

Connecting a room-to-room remote control unit

Connecting the power supply cord

RC-617 Infrared sensor

AC outlet

(wall)

Output

Input

AC 120 V, 60 Hz

AUX OUT

AC OUTLETS

• SWITCHED (total capacity – 120 W (1 A))

The power to the outlet is turned on and off in

conjunction with the POWER switch on the

main unit, and when the power is switched

between on and standby from the remote

control unit.

RC-616

Infrared retransmitter

Extension terminals for future use.

No power is supplied from this outlet when

this unit’s power is at standby. Never connect

equipment whose total power consumption

exceeds 120 W (1 A).

NOTE:

• For instructions on installation and operation of separately sold devices, refer to the devices’

operating instructions.

NOTE:

• Insert the plugs securely. Incomplete connections will result in the generation of noise.

• Only use the AC OUTLETS for audio equipment. Never use it for hair driers, monitors or other

electrical appliances.

Connecting the PRE OUT terminals

Power amplifier

ENGLISH

INPUT SELECTOR

MUTING

VOLUME

Operation

Before operating

Turning the sound off temporarily (MUTING)

Press POWER .

Press MUTING.

¢ ON:

The power indicator lights red.

• Canceling MUTING mode:

To cancel the muting mode, either press MUTING or adjust the

volume.

£ OFF:

<POWER>

The power turns off and the indicator is off.

Set [MODE SELECTOR 1] to “A”.

[POWER ON]

Listening over headphones

Set [MODE SELECTOR 2] to “CD/iPod”.

INPUT SELECTOR

Connect the headphones to PHONES .

• No sound is produced from the speakers automatically.

Press ON/STANDBY or [POWER ON].

4 _{• The power indicator blinks green and the power turns on.}

NOTE:

• To prevent hearing loss, be careful not to raise the volume level

excessively when using headphones.

VOLUME

MUTING

Playing the input source

Use INPUT SELECTOR to select the input source you

Switching the speakers

1 _{want to play.}

[MODE SELECTOR 1]

[MODE SELECTOR 2]

Press SPEAKER to turn the corresponding speaker pair

Start playback on the selected component.

on.

For operating instructions, refer to the component’s manual.

Use VOLUME to adjust the volume.

• The volume level is displayed on the volume level display.

INPUT SELECTOR

About the button names in this explanation

: Buttons on the main unit

: Buttons on the remote control unit

[

]

Button name only :

Buttons on the main unit and remote control unit

ENGLISH

Operation

¢When you do not want to adjust the tone

Checking the currently playing program source,

etc.

BAND

<PRESET> VIDEO SELECT

STATUS DIMMER

SHIFT TUNING

MEMORY

Press TONE DEFEAT to select “TONE DEFEAT ON”.

MODE

Press STATUS.

• The current program source and various settings are indicated on

the display.

¢When listening with the volume turned low

Press LOUDNESS to select “LOUDNESS ON”.

Switching the brightness of the display

Press DIMMER.

Adjusting the speaker volume

PURE DIRECT

The brightness of the display can be adjusted in three steps. The

display can also be turned off.

Press CH VOL to select the speaker.

The settable speaker switches each time this button is pressed.

[CHANNEL]

SHIFT

Use SELECT to adjust the volume.

[FM/AM]

Selecting the play mode (PURE DIRECT)

Can be adjusted within the range of –12 dB to +12 dB.

This mode reproduces the sound with extremely high quality. The

display that could affect the audio signals are turned “OFF”.

Press PURE DIRECT.

Combining the currently playing sound with the

desired image (VIDEO SELECT function)

DIMMER

STATUS

VIDEO SELECT

Press VIDEO SELECT until the desired image appears on

the display.

Setting the tone control

PURE DIRECT

¢Adjusting the tone

Press TONE CONTROL to select “BASS” or

1 _{“TREBLE”.}

• To cancel, press VIDEO SELECT to select “SOURCE”.

• The video source selected with the video select function is stored in

the memory for the different input sources.

Use SELECT to set the level.

BAND

Can be adjusted within the range of –10 dB to +10 dB.

[MEMORY BLOCK]

MODE

MEMORY

[TUNER]

TUNING

About the button names in this explanation

: Buttons on the main unit

: Buttons on the remote control unit

[

]

Button name only :

Buttons on the main unit and remote control unit

ENGLISH

Operation

Listening to the radio

Check that the remote control unit is set to “A”.

Auto tuning

Preset memory

Use INPUT SELECTOR to select “TUNER” or press

Use the “Auto tuning” or “Manual tuning” operation

1 _{to tune in the station to be preset in the memory.}

1 _[TUNER].

Auto preset memory

This unit is equipped with a function for automatically searching for

FM broadcast stations and storing them in the preset memory.

Press BAND to select “AM” or “FM”.

Press MEMORY.

When listening to the XM Satellite Radio (

page 15).

Press [MEMORY BLOCK] (A to G) or SHIFT to select

Press ON/STANDBY and set the DRA-297’s power

3 _{the desired memory block (A to G).}

1 _{to the standby mode.}

Press MODE to set the auto tuning mode.

3 _{• The “AUTO” indicator lights.}

Press PRESET or [CHANNEL] to select the desired

Hold PRESET • and press ON/STANDBY .

4 _{preset channel (1 to 8).}

2 _{• The unit automatically begins searching for FM broadcast}

Press TUNING.

4 _{• Automatic searching begins.}

stations.

Press MEMORY again.

When the first FM broadcast station is found, that station is

stored in the preset memory at channel A1.

5 _{• Store the station in the preset memory.}

Subsequent stations are automatically stored in order at preset

channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to

F8 and G1 to G8 for a maximum of 56 stations.

Channel A1 is tuned in after the auto preset memory operation is

completed.

• If tuning does not stop at the desired station, use to the “Manual

tuning” operation.

• “AM” or “FM” can be selected directly by pressing [FM/AM].

• To preset other channels, repeat steps 2 to 4.

A total of 56 broadcast stations can be preset — 8 stations (channels

1 to 8) in each of blocks A to G.

Manual tuning

• If an FM station cannot be preset automatically due to poor

reception, use the “Manual tuning” operation to tune in the station,

then preset it using the manual “Preset memory” operation.

Use INPUT SELECTOR to select “TUNER” or press

Recalling preset stations

1 _[TUNER].

Press [MEMORY BLOCK] (A to G) or SHIFT to select

• To interrupt this function, press ON/STANDBY .

1 _{the memory block.}

Press BAND to select “AM” or “FM”.

When listening to the XM Satellite Radio (

page 15).

Press PRESET or [CHANNEL] to select the desired

¢Default settings

2 _{preset channel.}

Press MODE to set the manual tuning mode.

Auto tuner presets

87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /

90.1 MHz

Check that the display’s “AUTO” indicator turns off.

A1 ~ A8

B1 ~ B8

520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,

90.1 / 90.1 MHz

Press TUNING.

The frequency changes continuously when the button is held in.

C1 ~ C8

D1 ~ D8

E1 ~ E8

F1 ~ F8

G1 ~ G8

90.1 MHz

• When the manual tuning mode is set, FM stereo broadcasts are

received in monaural and the “STEREO” indicator turns off.

• “AM” or “FM” can be selected directly by pressing [FM/AM].

ENGLISH

Operation

Note: The XM Radio ID does not use the letters “I”, “O”, “S” or “F”.

Activate your XM Satellite Radio service in the U.S. online at

http://activate.xmradio.com or call 1-800-XM-RADIO (1-800-967-

2346). You will need a major credit card. XM will send a signal from

the satellites to activate the full channel lineup. Activation normally

takes 10 to 15 minutes, but during peak busy periods you may need

to keep your XM Ready home audio system on for up to an hour.

When you can access the full channel lineup on your XM Ready home

audio system you are done. For more information or to subscribe in

Canada, visit XM on the Web at www.xmradio.ca or call XM’s Listener

Care at 1-877-GET-XMSR (1-877-438-9677).

XM Satellite Radio

BAND

STATUS

TUNING

¢ABOUT XM SATELLITE RADIO

XM Satellite Radio offers an extraordinary variety of commercial-free

music, plus the best in sports, news, talk and entertainment. XM is

broadcast in superior digital audio from coast to coast. From rock to

reggae, from classical to hip hop, XM has something for every music

fan. XM’s dedication to playing the richest selection of music is

matched by its passion for live sporting events, talk radio, up-to-the-

minute news, stand-up comedy, children’s programming, and much

more. For U.S. customers, information about XM Satellite Radio is

available online at www.xmradio.com. For Canadian customers,

information about XM Canada is online at www.xmradio.ca.

XM RADIO

ENTER

Checking the XM signal strength and Radio ID

¢XM READY LEGAL

Hardware and required monthly subscription sold separately. Other

fees and taxes, including a one-time activation fee may apply.

Subscription fee is consumer only. All fees and programming subject

to change. Channels with frequent explicit language are indicated with

an XL. Channel blocking is available for XM radio receivers by calling

1-800-XMRADIO (US residents) and 1-877-GET-XMSR (Canadian

residents).

For a full listing of the XM commercial-free channels and advertising-

supported channels, visit lineup.xmradio.com (US residents) or

xmradio.ca (Canadian residents).

Subscriptions subject to Customer Agreement available at

xmradio.com (US residents) and xmradio.ca (Canadian residents).

the property of their respective owners.

Use INPUT SELECTOR to select “TUNER” or press

1 _[TUNER].

XM RADIO

Press BAND to select “XM”.

Press STATUS until “SIGNAL” is displayed.

ENTER

3 _{• The display changes as shown below according to the receiving}

[D H F G]

condition.

STATUS

Display

GOOD

MARGINAL

WEAK

Condition

Signal strength is good

Signal strength is marginal

Signal strength is poor

Loss of the signal

¢XM READY SUBSCRIPTIONS

Once you have installed the XM Mini-Tuner Dock, inserted the XM

Mini-Tuner, connected the XM Dock to your XM Ready home audio

[NUMBER]

system, and installed the antenna, you are ready to subscribe and

begin receiving XM programming. There are three places to find your

eight character XM Radio ID: on the XM Mini-Tuner, on the XM Mini-

Tuner package, and on XM Channel 0. Record the Radio ID in the

following eight squares for reference.

(

0 ~ 9, +10)

Adjust the antenna location until “SIGNAL:GOOD”

[SEARCH]

TUNING

4 _{is displayed.}

BAND

Press STATUS until the XM channel (ex.XM001) is

5 _displayed.

[TUNER]

Press TUNING to select channel 0 (XM000).

Radio ID

XM000

Radio ID

About the button names in this explanation

: Buttons on the main unit

: Buttons on the remote control unit

[

]

Button name only :

Buttons on the main unit and remote control unit

ENGLISH

Operation

Channel selection

Direct access of channels

Setting the iPod Assignment

It is possible to assign the Control Dock for iPod’s (ASD-1R, sold

separately) audio and video signals to any input terminals on the DRA-

297 and play them.

Use INPUT SELECTOR to select “TUNER” or press

Press [SEARCH] in the XM mode.

1 _[TUNER].

Press [NUMBER] to enter the desired channel.

Press MENU.

Press BAND to select “XM”.

For example, if you want to access channel 123 (ex.XM123)

press [NUMBER] as shown below.

Channel number

F G

] to select the input

Use SELECT or press [

2 _terminals.

XM012

DeepTrks

Channel name

XM001

XM012

XM123

NONE:

This is the factory default setting.

Press TUNING to reach the desired channel.

DVD, VCR, V.A, CDR, CD:

When using a Control Dock for iPod, it is possible to connect with

the audio input terminal of the assigned function.

The channel changes continuously when you press and hold

TUNING.

When the artist name and song title are received, they are

displayed.

Press ENTER.

Category search

(Remote control unit)

• The optional standard Control Dock for iPod is DENON ASD-1R sold

separately.

• To assign to a different function after a function has already been

assigned, switch to a function other than the one that is assigned

then repeat the procedure.

F G

] in the XM mode.

Press [

Once all number have been input, press ENTER to

3 _{change the channel.}

• The current category name is displayed.

If the next [NUMBER] is not pressed within several seconds, the

channel automatically switches to the channel number that was

input.

Channel category

CAT:

Rock

NOTE:

F G

] to select the category, and press [

D H

] to

Press [

• DENON will accept no responsibility whatsoever for loss or

damage of data on an iPod occurring when the iPod is used

connected to the DRA-297.

• Some of the functions may not operate, depending on the type

of iPod and the software version.

2 _{select the channel within the selected category.}

Playing the iPod

The music recorded on the iPod can be played when using a Control

Dock for iPod (ASD-1R, sold separately). The iPod can be controlled

using the buttons on the main unit and the remote control unit.

• “LOADING” is displayed while receiving the channel or information.

• “UPDATING” is displayed while updating encryption code.

• When the selected channel is not available, “XM – – –” is displayed.

• Information on the artist name, song title, category and signal level

can be checked using STATUS.

iPod is a trademark of Apple Computer, Inc., registered

in the U.S. and other countries.

• The XM Satellite Radio channels can be preset in the same way as

AM/FM band (

page 14).

• “XM” can be selected directly by pressing XM RADIO.

With the iPod, non-copyrighted contents and contents that may be

legally reproduced or played may be reproduced and played by

individuals for their personal use. Violating copyrights is prohibited

by law.

ENGLISH

Operation

Listening to music

MODE

STATUS

ENTER

Manual search:

Press and hold in [D H] during playback.

• D: Fast reverse

• H: Fast forward

INPUT SELECTOR MEMORY

Connect the DRA-297 and iPod using the Control

1 _{Dock for iPod (ASD-1R) (}

page 10).

Track search:

Assign the input terminal at “Setting the iPod

Press [D H] during playback.

• D: Move to beginning of previous track

• H: Move to beginning of next track

2 _{Assignment” (}

page 16).

Use INPUT SELECTOR to select the function assigned in

Stop:

3 _{step 2.}

Press ENTER for at least 2 seconds during playback.

• Display “Remote iPod” on the main unit’s display.

Repeat play:

Press MODE.

The mode switches as follows each time MODE is pressed.

Remote iPod

[POWER OFF]

• Repeat One:

• Repeat All:

Single track repeat

All track repeat

If the screens above are not displayed, the iPod may not be

properly connected. Check the connections and settings.

INPUT SELECTOR

Shuffle play:

Press MEMORY.

The mode switches as follows each time MEMORY is pressed.

• Shuffle Songs: Single track shuffle

D H F G

], and

Operate using MENU, SELECT , [

4 _{ENTER while watching the iPod’s screen.}

• Shuffle Albums: Album shuffle

In the Remote mode, only SELECT , [D H F G], and ENTER can

be used.

• The optional standard Control Dock for iPod is DENON ASD-1R sold

separately.

[D H F G]

ENTER

• When STATUS is pressed during playback, the front panel display

switches between the title name, artist name and album name.

• Depending on the iPod’s software version, it may not be possible to

operate the iPod from the DRA-297. Use the latest version of the

software. Information on the latest version of the software can be

obtained on the Apple Computer website.

• With the DRA-297 it is possible to display folder names and file

names on the screen like titles. The DRA-297 can display up to 64

characters, consisting of numbers, capital letters and small letters.

A “?” mark is displayed in place of non-compatible characters.

STATUS

Listening to music in the Browse mode

The mode switches between the Remote mode and the Browse

mode if MODE is pressed for at least 2 seconds.

D H

] to select the music file,

Use SELECT or press [

1 _{then press ENTER or [ ].}

Press [F] to return to the music menu screen.

MODE

MEMORY

INPUT SELECTOR

Press ENTER or [ ].

• Playback starts.

Pause:

About the button names in this explanation

: Buttons on the main unit

: Buttons on the remote control unit

Press ENTER during playback.

Press again to resume.

[

]

Button name only :

Buttons on the main unit and remote control unit

ENGLISH

Operation

Recording the program source (recording the

source currently being monitored)

About the memory functions

Viewing still pictures and videos

(only for iPods equipped with the slideshow /

video function)

¢Last function memory

The various settings set when the DRA-297’s power is switched to

standby are stored in the memory. When the power is turned back on,

the settings made when the power was switched to standby are

recalled.

Select the input source to be played.

Use this procedure to view photo and video data stored on the iPod

on a monitor.

Start recording on the tape or video deck.

Press MODE for at least 2 seconds to switch from the

1 _{Browse mode to the Remote mode.}

For instructions, refer to the component’s operating instructions.

¢Backup memory

The various settings are stored in the memory for about 1 week, even

when the power is turned off or the power cord is unplugged.

• “Remote iPod” is displayed on the DRA-297’s display.

D H

Watching the iPod’s screen, press [

] to select

• The AUDIO IN’s signal selected with INPUT SELECTOR are output to

the CD-R/TAPE and VCR AUDIO OUT terminals.

2 _{“Photos” or “Video”, then press ENTER or [ ].}

• The iPod’s photo and video data are displayed on the monitor.

Initialization of the microprocessor

If the indication on the display is not normal or if the operation of the

unit is not correct, then the microprocessor should be reset by the

following procedure.

¢Simultaneous recording

The signals of the source selected with INPUT SELECTOR are output

simultaneously to the CD-R/TAPE and VCR REC OUT terminals. If a

total of two tape and/or video decks are connected and set to the

recording mode, the same source can be recorded simultaneously on

every decks.

• To output photo or video data recorded on the iPod to the monitor,

the iPod’s “TV Out” setting (under “Video Settings”) must be set to

“ON”.

Switch off the unit using POWER .

For details, refer to the iPod’s operating instructions.

Keep both SPEAKER (A and B) depressed and turn

2 _{on the unit by pressing POWER .}

Disconnecting the iPod

Check that the entire display is flashing at 1-second

Press ON/STANDBY or [POWER OFF] and set the

3 _{intervals and release the buttons.}

DRA-297’s power to the standby mode.

• The microprocessor will be initialized.

The iPod can be disconnected after switching to a function other

than the one to which the iPod input is assigned.

• If step 3 does not work, start over from step 1.

• If the microprocessor has been reset, all the button settings are

reset to the default values (the values set upon shipment from the

factory).

ENGLISH

Operating the remote control unit

Operating DENON audio components

Referring to the included list of preset codes, press

4 _{[NUMBER] to input the preset code (a 3-digit number)}

Set [MODE SELECTOR 1] to “A” or “B”.

for the manufacturer of the component whose signals

you want to store in the memory.

[MODE SELECTOR 1]

[MODE SELECTOR 2]

Set [MODE SELECTOR 2] to the position for the

2 _{component to be operated.}

To store the codes of another component in the

5 _{memory, repeat steps 1 to 4.}

Operate the audio component.

For details, refer to the component’s operating instructions.

While this remote control is compatible with a wide range of

infrared controlled components, it may be the case that some

component models cannot be operated with this remote control.

• The signals for the pressed buttons are emitted while setting the

preset memory. To avoid accidental operation, cover the remote

control unit’s transmitting window while setting the preset memory.

• Depending on the model and year of manufacture, this function

cannot be used for some models, even if they are of makes listed in

the list of preset codes.

[TV POWER ON]

[DVD/VDP

POWER ON]

[NUMBER]

(0 ~ 9, +10)

• Some manufacturers use more than one type of remote control

code. Refer to the included list of preset codes to change the

number and verify correct operation.

• The preset memory can be set for one component only among the

following: CD/iPod, DBS/CABLE and CD-R/TAPE.

Setting the preset memory function

• DENON and other makes of components can be operated by setting

the preset memory.

• This remote control unit can be used to operate components of

other manufacturers without using the learning function by

registering the manufacturer of the component as shown in the list

of preset codes (

End of this manual).

• Operation is not possible for some models.

Set [MODE SELECTOR 1] to “A” or “B”.

Set to the A side for the CD/iPod, TV, DBS/CABLE or DVD

position, and to the B side for the CD-R/TAPE or VCR position.

Set [MODE SELECTOR 2] to the component to be

2 _registered.

Press [DVD/VDP POWER ON] and [TV POWER ON] at

3 _{the same time.}

• The indicator starts flashing.

ENGLISH

Operating the remote control unit

Operating a component stored in the preset

memory

[POWER ON]

[POWER OFF]

[CHANNEL + –]

[POWER]

(0 ~ 9, +10)

Set [MODE SELECTOR 1] to “A” or “B”.

[NUMBER]

Set to the A side for the CD/iPod, TV, DBS/CABLE or DVD

position, and to the B side for the CD-R/TAPE or VCR position.

[

]

[

]

[

3],

[6 7],

[VCR CH + –]

[8 9]

0], [SKIP +]

[BAND], [TV/VCR]

[AUDIO], [SUBTITLE],

[ANGLE], [PICT ADJ.],

[S. MODE]

Set [MODE SELECTOR 2] to the component you want

2 _{to operate.}

[

[TOP MENU]

[TUNING + –]

[DISPLAY],

Operate the component.

[ENTER]

[D H F G],

[RETURN],

For details, refer to the component’s operating instructions.

Some models cannot be operated with this remote control unit.

[MENU]

[SETUP]

[MODE SELECTOR 1]

[MODE SELECTOR 2]

ENGLISH

Operating the remote control unit

¢Functions of buttons for the different devices

[Front]

(Monitor)

Device operated

MODE SELECTOR 1

MODE SELECTOR 2

OFF

CD player or iPod

Satellite tuner

Cable TV

DVD player

CD recorder

Tape deck

MD recorder

Video deck

CD/iPod

Power off

Power on

Preset –

DBS/CABLE

DVD

Power off

Power on

Preset –

Preset +

Play

CD-R/TAPE

Power off

Power on

Preset –

VCR

–

Power off

Power on

Preset –

Power off

Power on

Preset –

–

Power on

TV channels –

TV channels +

Punch through

Channels –

Channels +

Punch through

Channels –

Channels +

Punch through

TV channels –

CHANNEL –

CHANNEL +

Preset +

TV channels +

Play

Forward play

Stop

Play

Stop

3, A/B

Pause

A/B switching

Reverse play

Rewind

Pause

0, SKIP +

Disc skip +

Search (reverse)

Search (forward)

Skip (reverse)

Skip (forward)

Disc skip +

–

Search (reverse)

Search (forward)

Skip (reverse)

Skip (forward)

Search (reverse)

Search (forward)

Skip (reverse)

Skip (forward)

Search (reverse)

Search (forward)

Skip (reverse)

Skip (forward)

Top menu

Fast forward

–

Search (forward)

8, VCR CH –

9, VCR CH +

Channel –

–

Channel +

–

D H F G

Cursor operation

Dimmer

Cursor operation

Dimmer

Cursor operation

Dimmer

Cursor operation

Dimmer

Cursor operation

Dimmer

Cursor operation

Dimmer

Cursor operation

Dimmer

–

Dimmer

DIMMER

ENTER

Enter

–

Status

Display

Status

–

STATUS

Video selection

Pure direct

Return

Video selection

Pure direct

Video selection

Pure direct

Video selection

Pure direct

VIDEO SELECT

PURE DIRECT

Pure direct

Set up

Pure direct

ENGLISH

Operating the remote control unit

[Rear]

(Monitor)

Device operated

MODE SELECTOR 1

MODE SELECTOR 2

POWER

CD player or iPod

Satellite tuner

Cable TV

DVD player

CD recorder

Tape deck

MD recorder

Video deck

CD/iPod

Power on/off

Channels

DBS/CABLE

DVD

Power on/off

Channels

CD-R/TAPE

Power on/off

Channels

VCR

Power on/off

Channels

Power on/off

Channels

Power on/off

Channels

NUMBER (0 ~ 9, +10)

BAND

FM/AM/XM switching

Memory block

Tuning +

TV/VCR switching

Audio

FM/AM/XM switching

Memory block

Tuning +

FM/AM/XM switching

Memory block

Tuning +

FM/AM/XM switching

Memory block

Tuning +

TV/VCR switching

–

A, AUDIO

–

Subtitle

–

B, SUBTITLE

C, ANGLE

–

Angle

–

Picture adjust

Search mode

TV volume +

TV volume –

–

D, PICT ADJ.

E, S.MODE

–

TV volume +

TV volume –

Volume +

Volume –

–

Volume +

Volume –

TV volume +

TV volume –

TUNING +

Tuning –

TUNING –

Default setting

(Preset code)

DENON

(111)

HITACHI

(134)

ABC

(007)

DENON

(111)

DENON

(114)

HITACHI

(108)

–

Special remarks

q, e

q, w

Special remarks:

q It is only possible to set the preset memory for one device per mode. When a new code is preset, the previous code is automatically deleted.

w Note that the function names of the DVD buttons on the remote control unit may differ for some brands. Check beforehand.

e The CD, TAPE/CD-R/MD, VCR or DVD/VDP buttons can be assigned to a TV or satellite tuner (or cable TV) (

page 23).

ENGLISH

Operating the remote control unit

Setting the punch through function

“Punch Through” is a function allowing you to operate 1, 2, 0, 3,

6, 7, 8 and 9 on CD, DVD/VDP, TAPE/CD-R/MD or VCR

components when in the TV or DBS/CABLE mode. By default, nothing

is set.

[MODE SELECTOR 1]

[MODE SELECTOR 2]

Set [MODE SELECTOR 1] to “A”.

Set [MODE SELECTOR 2] to the component to be

2 _{registered (TV or DBS/CABLE).}

Press [A] and [D] at the same time.

3 _{• The indicator starts flashing.}

Input the number of the component you want to set.

[D]

[A]

No.

DVD/VDP

TAPE/CD-R/MD

VCR

No setting

ENGLISH

Troubleshooting

Symptom

Cause

Measures

Page

Troubleshooting

• Batteries dead.

• Remote control unit too far from this • Move closer.

• Replace with new batteries.

This unit does not

operate properly when

remote control unit is

used.

unit.

If a problem should arise, first check the following.

1. Are the connections correct?

2. Have you operated the receiver according to the Operating Instructions?

3. Are the speakers and other components operating properly?

If this unit is not operating properly, check the items listed in the table below. Should the problem persist,

there may be a malfunction. Disconnect the power immediately and contact your store of purchase.

• Obstacle between this unit and • Remove obstacle.

remote control unit.

• Different button is being pressed.

—

• Press the proper button.

—

• < and > ends of batteries inserted • Insert batteries properly.

in reverse.

Power has turned off

and the power indicator

is blinking red.

• The set’s internal temperature has • Put the DRA-297 in a well-ventilated

risen and the protection circuit has

been activated.

place.

Symptom

Cause

Measures

Page

• Turn off the power, then wait for the

set to fully cool off before turning the

power back on.

Display not lit and sound • Power supply cord not plugged in • Check the insertion of the power

not produced when

POWER switch set to

on.

securely.

supply cord plug.

• The core wires of the speaker cables • Check the connections of all the

are touching each other or the DRA-

297’s rear panel, activating the

protection circuit.

speaker cables.

Display lit but sound not

produced.

• Speaker

connected.

cables

not

securely • Connect securely.

• DRA-297 is malfunctioning.

• Turn off the power and contact a

DENON customer service center.

• INPUT SELECTOR knob position is • Switch to the proper position.

not appropriate.

• Volume control set to minimum.

• MUTING is on.

• Turn volume up to suitable level.

• Switch off MUTING.

“CHECK ANTENNA” is

displayed in the XM

mode.

• DRA-297’s XM connectors and the • Check that the connection are 10, 15

XM Mini-Tuner and Home Dock is not

properly connected.

correct.

Nothing is displayed on

monitor.

• DRA-297’s video output terminals • Check that the connections are

and monitor’s input terminals are not

properly connected.

correct.

“NO SIGNAL” is

displayed in the XM

mode.

• The signal cannot be received.

• Reposition your XM Mini-Tuner and

Home Dock.

• Monitor’s input setting is wrong.

• Set the monitor’s input selector to

the terminals to which video signals

are connected.

—

“OFF AIR” is displayed

in the XM mode.

• The selected channel is not currently • Select the another channel.

broadcasting.

Copying from DVD to

VCR is not possible.

• Copying between a source such as • Copying is not possible.

DVD and VCR is not usually

possible, as DVDs are often encoded

with copy-protection signals that

prevent VCR recording.

—

Receiving only XM

channels 0 and 1.

• The XM Tuner is not activated.

• Contact XM Radio.

10, 15

No sound is produced

from subwoofer.

• Subwoofer’s power is not on.

• Subwoofer’s output is not connected. • Connect properly.

• The subwoofer’s channel volume • Turn the subwoofer’s channel volume

• Turn on the power.

—

level is set to “–12 dB”.

level up.

ENGLISH

Specifications

¢ Audio section

• Power amplifier

Rated output:

50 W + 50 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)

Output terminals:

A or B

A + B

4 ~ 16 Ω/ohms

8 ~ 16 Ω/ohms

• Analog

(LINE input-PRE OUT)

Input sensitivity / input impedance:

Frequency response:

S/N:

Total harmonic distortion:

Rated output:

200 mV / 47 kΩ/kohms

10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT ON)

98 dB (IHF-A weighted) (TONE DEFEAT ON)

0.009 % (–3 dB at rated output, 8 Ω/ohms) (1 kHz)

1.2 V

¢ Video section

• Standard video terminals

Input / output level and impedance: 1 Vp-p, 75 Ω/ohms

Frequency response:

5 Hz ~ 10 MHz — +1, –3 dB

¢ Tuner section

[FM]

[AM]

(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10^–15W)

87.5 MHz ~ 107.9 MHz

Receiving Range:

Usable Sensitivity:

520 kHz ~ 1710 kHz

18 µV

1.0 µV (11.2 dBf)

50 dB Quieting Sensitivity:

MONO

STEREO

MONO

STEREO

1.6 µV (15.3 dBf)

23 µV (38.5 dBf)

77 dB (IHF-A weighted)

72 dB (IHF-A weighted)

0.15 % (1 kHz)

S/N (IHF-A):

Total Harmonic Distortion (at 1 kHz): MONO

STEREO

0.3 % (1 kHz)

¢ General

Power supply:

AC 120 V, 60 Hz

3.0 A

Power consumption:

Maximum external dimensions:

Mass:

434 (W) x 147 (H) x 417 (D) mm (17-3/32” x 5-25/32” x 16-27/64”)

8.5 kg (18 lbs 11.8 oz)

¢ Remote control unit (RC-1053)

Batteries:

R6P/AA Type (Two batteries)

External dimensions:

Mass:

52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”)

175 g (Approx. 6.2 oz) (included batteries)

* For purposes of improvement, specifications and design are subject to change without notice.

ENGLISH

¢ List of preset codes

ASA

042

Go Video

Goldstar

047, 048

Minolta

013, 023

DVD

Denon

Asha

087

000, 006, 012, 062, 088

Mitsubishi

001, 003, 008, 013, 014,

017, 027, 029, 039, 040,

041, 045, 097

081

014, *[111]

009

Audio Dynamic

Audiovox

Beaumark

Broksonic

Calix

005, 085

Gradiente

Grundig

094

Aiwa

088

042

Hitachi

JVC

010

087

Harley Davidson

Harman Kardon

Hi-Q

094

Motorola

006, 011

012, 013

005

086, 093

040, 062

Montgomery Ward

001, 002, 007, 009, 049,

063, 081, 115, 117

009, 087, 094

007, 009, 011, 087, 090,

094

Konka

088

091

Magnavox

Mitsubishi

Panasonic

Philips

Pioneer

Sanyo

Candle

006, 087, 088, 089, 090

049, 057

Hitachi

009, 013, 023, 026, 058,

*[108], 109, 110, 111

004, 005, 007, 023, 028,

049, 062, 085, 087, 088

013, 026

MTC

004

Canon

Multitech

014

Capehart

Carver

025, 055, 056, 071

015

JC Penny

005, 015, 016, 017

003, 008

018

NAD

NEC

038

CCE

095

Jensen

JVC

004, 005, 006, 018, 026,

029, 045, 061, 062, 085

088

Citizen

006, 007, 087, 088, 089,

090, 095

004, 005, 006, 026, 029,

043, 044, 045, 046, 085

004, 005, 006, 026, 029,

033, 045, 085, 090

088

Sony

002, 019, 020

001, 021, 022

023

Nikko

Toshiba

Zenith

Craig

007, 087, 088, 091, 115

006, 049, 073, 080, 087,

090, 092

Kenwood

Noblex

087

Curtis Mathes

Optimus

Optonica

Panasonic

081, 088

Kodak

Lloyd

021

VDP

Denon

Cybernex

Daewoo

087

009, 094

024, 049, 064, 066, 067,

068, 069, 107

009

028, 029, 112

025, 055, 059, 074, 089,

093, 095, 096

025, 055

LXI

088

Magnavox

Mitsubishi

Panasonic

Philips

026

Magnavox

015, 016, 042, 049, 063,

106

Perdio

Pentax

Philco

Philips

Pilot

028

Daytron

009, 013, 023, 058, 090

015, 016, 049

015, 021, 042, 049, 105

088

029, 030

026

DBX

005, 085

Magnin

Marantz

087

Dumont

053

004, 005, 006, 015, 042,

049, 085, 090

088

Pioneer

RCA

028, 031

032

Dynatech

Electrohome

Electrophonic

Emerson

009

001, 088, 097

088

Marta

Pioneer

005, 013, 029, 036, 037,

038, 045, 085

025, 055, 090

063, 080

Sony

033, 034, 035, 036

MEI

049

001, 009, 017, 027, 086,

088, 089, 092, 093, 097,

100, 101, 102, 103, 104,

117

Memorex

009, 033, 049, 053, 060,

081, 087, 088, 091, 094,

115

Portland

Proscan

Pulsar

VCR

Admiral

Aiko

081

060

095

Metz

123, 124, 125, 126, 127,

128

Quartz

033

Aiwa

009

Fisher

009, 028, 031, 053, 054,

091, 099, 115

007, 011, 049, 050, 051,

052, 073, 080, 087

Quasar

034, 035, 049

001, 002, 021, 081, 087,

088, 091, 094, 097, 098,

115

Akai

026, 027, 070, 072, 082,

MGA

001, 017, 027, 041, 097

087

Radio Shack

083, 084

055

MGN Technology

Midland

Alba

011

Amstrad

009

PRESET CODE

ENGLISH

Radix

088

Technics

Teknika

024, 049

Bell & Howell

Bradford

045, 118

Fujitsu

Funai

004, 062

Randex

088

009, 010, 022, 049, 088,

094

061

004, 062

RCA

007, 013, 019, 023, 058,

063, 064, 065, 073, 080,

082, 087

Brockwood

Candle

003, 047

Futuretech

004

TMK

087, 092

003, 030, 031, 032, 038,

020, 036, 037, 040, 044,

058, 066, 088, 119, 120,

125, 147

Toshiba

013, 017, 020, 041, 059,

089, 098, 099, 117

007, 087, 088

087

047, 049, 050, 122

Realistic

009, 021, 031, 033, 049,

053, 081, 087, 088, 091,

094, 097, 098

055

Capehart

Celebrity

Circuit City

Citizen

003

Totevision

Unirech

046

Goldstar

000, 015, 029, 031, 039,

048, 051, 056, 057, 067,

068, 069, 116

062

003

Ricoh

Vecrtor Research

Victor

005, 062, 085, 089, 090

005, 045, 046, 085

005, 027, 085, 089, 090

007, 087

029, 030, 031, 032, 034,

038, 047, 049, 050, 054,

061, 095, 122, 123

031, 047, 049

003, 047, 049, 135

013, 051, 052, 061

051, 052, 061

004, 061

Salora

033, 041

Grundy

Hitachi

Samsung

007, 011, 051, 059, 070,

083, 087, 089, 113

081

Video Concepts

Videosonic

Wards

029, 031, 051, 052, 070,

111, 112, 113, 124,

*[134]

Concerto

Colortyme

Contec

Sanky

013, 021, 023, 087, 088,

089, 091, 094, 097, 118,

119, 120

Sansui

005, 026, 029, 045, 061,

085, 114

Hitachi Pay TV

Infinity

151

Cony

017, 071

Sanyo

032, 033, 053, 087, 091,

115, 116

XR-1000

Yamaha

094

Craig

Janeil

122

004, 005, 006, 026, 062,

085

Crown

029

JBL

017, 071

SBR

042

Curtis Mathes

029, 034, 038, 044, 047,

049, 053, 095, 118

027, 029, 039, 048, 049,

054, 055, 106, 107, 137

003, 049

JC Penny

020, 034, 039, 040, 041,

044, 048, 050, 058, 066,

069, 076, 088, 090, 095,

125, 136, 159

046

Scott

017, 020, 086, 089, 093,

117

Zenith

060, 078, 079

Daewoo

Sears

013, 023, 028, 031, 033,

053, 054, 088, 091, 098,

099, 115

Admiral

Adventura

Aiko

045, 121

Daytron

Dimensia

Dixi

JCB

JVC

122

044

019, 051, 052, 072, 073,

091, 117, 126

018, 046

Sentra

Sharp

Shogun

Sony

055

054

007, 015, 027

046

001, 002, 021, 097

087

Akai

016, 027, 046

Electroband

Electrohome

Elta

Kawasho

Kenwood

Kloss

Alleron

A-Mark

Amtron

Anam

062

029, 056, 057, 058, 147

027

038, 056, 057

010, 032

075, 076, 077, 078, 079,

121, 122

007

061

Emerson

029, 051, 059, 060, 061,

062, 118, 123, 124, 139,

148

Kloss Novabeam

KTV

005, 122, 127, 131

074, 123

STS

023

006, 007, 036

Sylvania

009, 015, 016, 017, 041,

049, 094

Anam National

AOC

061, 147

Loewe

071

003, 007, 033, 038, 039,

Envision

Etron

038

Logik

144

Symphonic

Tandy

009, 094

047, 048, 049, 133

027

Luxman

LXI

031

009

Archer

Audiovox

Bauer

007

Fisher

014, 021, 063, 064, 065,

118

008, 014, 017, 024, 040,

044, 063, 071, 075, 076,

077, 118, 125

Tashiko

Tatung

Teac

009, 088

007, 061

155

004, 026, 030

004, 009, 026, 094

Formenti

Fortress

155

Belcor

047

012

PRESET CODE

ENGLISH

Philips

005, 015, 017, 050, 051,

056, 078, 087, 088, 089,

131, 132, 147

124, 128, 142

054

Magnavox

005, 010, 017, 030, 033,

038, 050, 056, 071, 078,

079, 085, 089, 108, 109,

110, 127, 131, 132, 145

015, 017, 071, 080

027

Squareview

Supre-Macy

Supreme

004

Eastern

Garrard

015

032, 122

011

046

Gemini

030, 033, 034

030, 031, 032

006

Pioneer

Portland

Price Club

Proscan

Proton

Sylvania

005, 010, 017, 030, 078,

079, 085, 089, 101, 127,

131, 132, 145, 155

004, 148

General Instrument

Hytex

Marantz

Matsui

095

Jasco

011

040, 044, 125

035, 051, 092, 129

042

Memorex

014, 027, 045, 083, 118,

144

Symphonic

Tandy

Jerrold

009, 016, 017, 026, 032

012, 121

Magnavox

Movie Time

NSC

018

Pulsar

Metz

MGA

160, 161, 162, 163

001, 039, 048, 056, 057,

058, 065, 081, 083

125

Tatung

036, 124

019

Quasar

036, 037, 074, 141

011, 044, 063, 093, 118

040, 044, 125, 130, 137,

151, 152

Technics

Teknika

037

019

Radio Shack

RCA

001, 030, 032, 034, 052,

054, 078, 083, 095, 144,

156, 157

Oak

000, 006, 020

Midland

Minutz

Panasonic

Philips

001, 005

066

011, 012, 013, 018, 021

Realistic

Saisho

014, 063, 093, 118

027

Mitsubishi

001, 016, 039, 048, 056,

057, 058, 065, 081, 082,

083, 105

Tera

035, 129

Pioneer

RCA

002, 003, 022

029

THOMSON

Toshiba

165, 166

Samsung

003, 015, 034, 053, 055,

057, 094, 095, 136, 153

139

008, 014, 034, 063, 075,

076, 095, 097, 136, 158,

159

Regency

Samsung

Scientific Atlanta

Signal

015

Montgomery Ward

Motorola

MTC

011, 020, 144, 145, 146

121, 147

014, 023

004, 024, 025

014

Sansui

Sanyo

013, 014, 021, 022, 063,

064, 081, 096

015

031, 034, 039, 048, 095

008, 075, 076, 128

002, 036, 061, 147

002

Universal

Victor

020, 066, 088

019, 073, 126

016

NAD

SL Marx

Starcom

Stargate

Teleview

Tocom

014

SBR

National

Video Concepts

Viking

009

Schneider

Scott

015

National Quenties

NEC

032, 122

014

062

031, 038, 039, 048, 057,

084, 086, 135, 147

054

Wards

005, 045, 066, 078, 085,

088, 089, 093, 102, 103,

131, 132, 148

042, 114, 115, 140, 144,

149

014

Sears

008, 014, 021, 022, 023,

024, 025, 040, 052, 057,

062, 063, 064, 065, 073,

075, 076, 097, 098, 125,

159

007, 016

019

Nikko

TV86

NTC

054

Zenith

Zonda

Unika

011

Optimus

Optonica

Orion

128

United Artists

Universal

Viewstar

Zenith

006

011, 012, 093, 121

004, 139

007

010, 011

018, 019

027, 028

Sharp

011, 012, 013, 026, 093,

099, 100, 104, 121

013

Panasonic

002, 009, 017, 036, 037,

071, 141, 143, 147

005, 010, 030, 050, 051,

056, 079, 085, 127, 131,

132, 145, 147

CABLE

ABC

Siemens

Signature

Simpson

Sony

006, *[007], 008, 009

045, 144

Philco

Archer

010, 011

011

DBS (SATELLITE)

050

Century

Citizen

Alphastar

Chaparral

Dishnet

Drake

054

043, 046, 138, 146, 150

030, 050, 062

007, 033

011

035, 036

053

Soundesign

Spectricon

Colour Voice

Comtronic

012, 013

014

037, 038

PRESET CODE

ENGLISH

Echostar Dish

062, 066

Magnavox

Marantz

MCS

006, 015, 035

016, 028, 035

016, 024

Optimus

Panasonic

Philips

016, 017

021

DVD preset codes

111 (default)

048, 055, 056

014

General Instruments

Grundig

Hitachi

039, 040, 041

011

DVD-800

DVD-555

DVD-755

DVD-900

DVD-910

DVD-955

DVD-1000

DVD-1200

DVD-1500

DVD-1710

DVD-1910

DVD-2200

DVD-2800

DVD-2800II

DVD-2900

DVD-2910

DVD-3800

DVD-3910

DVD-5900

DVD-5910

DVD-9000

DVM-715

DVM-1800

DVM-1805

DVM-1815

DVM-2815

DVM-4800

070, 071, 072, 073

DVD-1600

DVD-2000

DVD-2500

DVD-3000

DVD-3300

Onkyo

Optimus

Philips

Pioneer

Sears

025, 027

Pioneer

Sony

016, 017, 018

022, 023, 024

021

058, 059

017, 020, 021, 022, 023

014, 032, 033, 035

006, 022, 030

006

Hughes Network

JVC

063, 064, 065, 069

Technics

Victor

057

013

Kathrein

Magnavox

Nokia

074, 075, 076, 083

Wards

016

060

Sony

023, 031

Yamaha

019, 020

070, 080, 084, 085, 086

Teac

002, 009, 028

016, 029, 036

035, 037

*[ ] : Preset codes set upon shipment from the

Philips

060

Technics

Wards

Yamaha

Zenith

factory.

Primestar

Proscan

RCA

051

048, 055, 056

038, 039, 040, 041

042

048, 055, 056, 068

Realistic

Sierra I

Sierra II

Sierra III

Sony

042

036

CDR

Denon

Philips

036

*[111], 112

036

112

049, 067

STS1

043

STS2

044

Denon

Kenwood

Onkyo

Sharp

113

STS3

045

003, 004

007

SRS4

046

Technisat

Toshiba

Uniden

077, 078, 079, 081, 082

005

047, 050

061

Sony

006

TAPE

Denon

*[114]

010, 011

011

*[111], 044

Aiwa

001, 035, 043

002

Carver

Burmster

Carver

Emerson

Fisher

JVC

Harman/Kardon

JVC

011, 012

013, 014

015

003, 035

004, 005, 006, 007

003, 008, 009, 010

018, 019

Kenwood

Magnavox

Marantz

Onkyo

011

Kenwood

011, 012, 013, 014, 017

025, 027

PRESET CODE

TOKYO, JAPAN

www.denon.com

Denon Brand Company, D&M Holdings Inc.

Printed in China 00D 511 4540 105

Sanyo Uf 2812 User Manual
Sanyo Ks1852 User Manual
Samsung Fx1600 User Manual
Samsung Avmch072ca1 User Manual
Samsung Avmch052ca1 User Manual
Panasonic Kx Pw32cl User Manual
Panasonic Dp 6000 User Manual
Hampton Bay Mercer Ceiling Fan Manual
Hampton Bay Cobram User Manual
ASUS TS300 E8 PS4 User Manual