DELVCAM DELV WHDI 7 User Manual

Delvcam  
DELV-WHDI-7  
User Guide  
Contents  
1. PRODUCT DESCRIPTION ................................................................................3  
2. WIRELESS HD TRANSMITTER.......................................................................5  
3. WHDI REMOTE CONTROL...............................................................................5  
4. WHDI FUNCTION................................................................................................6  
5. INSTALLATION OF SUNSHADE COVER AND BATTERY PLATE ...........8  
6. DV BATTERY MOUNT PLATE..........................................................................9  
7. SETTING MENU ................................................................................................10  
8. ACCESSORIES .................................................................................................13  
9. PARAMETERS...................................................................................................13  
10. TROUBLE SHOOTING.....................................................................................14  
2
1. PRODUCT DESCRIPTION  
1Speaker.  
2POWERON/OFF (Light turns to red when power on).  
3VIDEO: Indicator lights up when signal switch to video state.  
4YPbPr: Indicator lights up when signal switch to YPbPr state.  
5HDMI: Indicator lights up when signal switch to HDMI state.  
6WHDI: Indicator lights up when signal switch to WHDI state.  
7F1F2F3F4User-definable buttons.  
Default functions:  
F1 Screen Marker  
F2 Aspect Ratio  
*F1 Peaking  
F3 Check Field  
F4 Underscan  
*F3 Exposure  
*F4 Histogram  
*F2 False Color  
function customized to meet your needs)  
8Knob BRI/M/SELPress the knob to access the menu function,  
pressing the knob in the menu to return to the previous page or  
exit the menu. Rotate knob to select an option.  
Default as Brightness function.  
9Knob SAT/ADJPress the knob to select main MENU options; rotate  
knob to confirm the selection and adjust parameter values.  
Default as Saturation function.  
10Knob TINTDefault as Tint function.  
11Knob CONTRAST: Default as Contrast function.  
* Option for product model with"/P" only.  
3
1. Video signal output / input.  
2. Audio signal input.  
3. HDMI signal output (Optional) / input.  
4. YPbPr signal input  
5 Mini USB input. (Only for program upgrades, do NOT use if  
non-professionals)  
6. Power cable interface (connecting to the battery plate).  
7. DC power input.  
8. Battery power on/off switch.  
9. 4-pin XLR DC power input.  
Pin number Signal  
GND  
②③  
……...  
+12V  
10. WHDI Infrared receiving window.  
4
2. WIRELESS HD TRANSMITTER  
1. Code key.  
2. Network indicating light.  
3. Video indicator.  
4. HDMI interface (connect with HDMI device).  
5. Mini USB port (connect with power).  
3. WHDI REMOTE CONTROL  
5
4. WHDI FUNCTION  
1. Connect WHDI transmitter with computer or camcorder via HDMI  
interface, display as below.  
2. Press the  
EXIT button on remote control to activate “Select Video  
Source” function, and the transmitter matched will be displayed as  
follows.  
6
3. Press the  
ADD button on remote control to activate registration  
function as follows.  
4. Then long press Code key on WHDI transmitter to activate connecting  
interface as follows.  
5. Waiting for connection completed.  
7
5. INSTALLATION OF SUNSHADE  
COVER AND BATTERY PLATE  
Installation of sunshade cover  
Disassembly of sunshade cover:  
Installation steps Installation completed Disassembly steps Disassembly completed  
Steps of sunshade cover on / off:  
Please follow the instructions steps, or may damage the cover.  
Open Step:  
Closed steps:  
Do not press the edge in the under of the cover, otherwise it will  
result in open failure.  
8
6. DV BATTERY MOUNT PLATE  
Standard mounts process  
Following three types of battery plates are suitable for this device, model  
F970, QM91D, DU21 & LP-E6 (choose 2 out of 4).  
MODEL: F-970 MODEL: QM91D  
DV Battery Mount Plate:  
MODEL: DU21 MODEL: LP-E6  
DV Battery Mount Plate Specification:  
Model DU21 for battery of Panasonic DV:  
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with  
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi  
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.  
Model QM91D for battery of SONY DV:  
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV  
116/DCR-DVD/PS105K/300K/10P/1E series.  
Model F970 for battery of SONY DV:  
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,  
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,  
HVR-V1C, FX7E F330.  
Model LP-E6 for battery of Canon DSLR:  
5D Mark II/EOS7D/EOS60D;  
9
V-mount battery plate (optional): Please refer to GP-L130AB type  
battery specifications.  
Anton Bauer mount battery plate (optional): Please refer to  
GP-L130B type battery specifications.  
7. SETTING MENU  
Before setting the functions, please make sure the device is connected  
correctly.  
When power on, press BRI/M/SEL knob on the device, function  
menus will pop-up on the screen. After confirm the option value, then  
press BRI/M/SEL knob to return to the previous, and press the  
BRI/M/SEL knob again to exit the menu settings.  
BRI / M / SEL knob to select an option.  
SAT / ADJ knob to select the main menu, adjusting option values  
and confirm the selection.  
10  
ITEMS  
OPTIONS  
Color Temp  
6500ºK/7500 ºK/9300 ºK/User  
Red  
Green  
Blue  
Note: Only available  
under “User” mode to  
meet the color value  
you need.  
Check Field OFFMONORed, Green and  
Blue  
Aspect Ratio Full Screen,4:3 and 16:9  
Pixel-to-Pixel ON/OFF  
Camera  
H/V delay  
480P (5DII Mode) /1080I (5DIII Mode)  
OFF,H&V Delay, V Delay and H  
Delay  
ITEMS  
OPTIONS  
Center Marker  
ON/OFF  
Screen Markers OFF,  
95%,93%,90%,88%,85%  
and80%  
ITEMS  
OPTIONS  
Language  
PIP  
English /Chinese  
Small, Medium, Large, PBP, POP  
In small, medium and large  
interface can adjust the source,  
position, and swap;  
In PBP and POP interface can  
adjust the source and swap.  
5s10s15s  
Input Format  
OSD  
LOGO  
ON/ OFF  
ON/ OFF  
ON/ OFF  
Mono/ Color  
Freeze Input  
Image Flip  
*Peaking  
* Option for product model with"/P" only.  
11  
Assistant  
Func.  
Manual/Auto  
Manufacturer OK/Cancel(Reverse the SAT / A  
Default  
ISP  
DJ knob to select "OK")  
For program upgrades (Please  
reboot your computer if press  
accidentally!)  
Function of buttons and knobs can be customized by users’ needs.  
Functions of F1-F4 buttons can also be customized:  
·Aspect Ratio ·Check Field ·Freeze Input ·Center Marker  
·Underscan  
·Zoom  
·H/V delay  
·Color Bar  
·Pixel-to-Pixel ·PIP  
·*False Color ·*Exposure ·*Histogram.  
·Screen Marker  
·Camera  
·*Peaking  
Functions of R1-R4 buttons can also be customized:  
·Contrast  
·Tint  
·Brightness  
·Volume  
·Saturation  
·Sharpness  
* Option for product model with"/P" only.  
12  
8. ACCESSORIES  
Standard accessories:  
1. Flexible Folding Sun Shade Cover 1 piece  
2.WHDI Accessories  
3. Battery Plate (2 out of 4)  
3. Manual  
1 pair  
2 pieces  
1 copy  
1 piece  
1 piece  
4. HDMI Type A-C  
5. DC Adapter  
Optional accessories  
1. Anton Bauer Mount Battery Plate  
2. V-mount Battery Plate  
1piece  
1piece  
1piece  
1piece  
3. Shoe Mount (for camera only)  
4. Li-ion Battery  
9. PARAMETERS  
Panel Size  
Resolution  
Contrast  
7’’ TFT LCD  
1024×600  
800:1  
Viewing Angle  
Input Voltage  
Input Signal  
160°/ 150°(H/V)  
DC12V (XLR DC Connection)  
WHDI ,HDMI, YPbPr, AV  
Operating Temperature -20~60℃  
Storage Temperature  
Power Consumption  
-30~70℃  
≤12W  
Size:(LWD)  
194.5×150×38.5mm/48.5mm(with  
closed) /158.5mm (with cover open)  
560g / 720g (with cover)  
cover  
Weight  
13  
10. TROUBLE SHOOTING  
1. Only black-and-white display:  
Check whether the color saturation is properly setup.  
2. Power on but no pictures:  
Check whether the cables of Video, HDMI, YPbPr and WHDI are correctly  
connected. Please use the standard power adapter coming with the  
product package. Improper power input may cause the device.  
3. Wrong or abnormal colors:  
Check whether the cables are correctly and properly connected. Broken or  
loose pins of the cables may cause a bad connection.  
4. When on the picture shows size error:  
Press “MENU→  
Underscan” to zoom in/out pictures automatically  
When receiving HDMI /WHDI signals.  
5. Other problems:  
Please press “MENU” button and choose “  
→OK”  
→Manufacturer Default  
6. According to the ISP, the machine cannot function properly  
ISP for program upgrades, non-professionals do not use. Please reboot  
your computer if press accidentally!  
It is normal to see some bright lines appear on the screen when turn off the  
device.  
Note: due to constant effort to improve products and product  
features, specifications may change without notice.  
14  

Toshiba Air Conditioner Mmy Map1604ht8 E User Manual
Spt Wa 8011s User Manual
Philips Scd609 User Manual
Omega Speaker Systems Drx Fp User Manual
MAYTAG MMV6190FZ 02 User Manual
JVC AV 21YT11 User Manual
HP DESIGNJET 3500 User Manual
EMERSON QUIET KOOL EATC08RE1 User Manual
DALI IO 6 User Manual
CRAFTSMAN 135.17243 User Manual