DELVCAM DELV HDSD 10 User Manual

Delvcam  
DELV-HDSD-10  
User Guide  
1. PRODUCT DESCRIPTION  
1. TALLY (indicator light);  
2. Battery power on/off switch: ” is battery power; “O” is power off; “|” is  
DC power;  
3. Earphone jack;  
4. Power indicator light;  
5. VIDEO: Indicator lights up when signal switch to video state;  
(No use under the SDI mode);  
6. YPbPr: Indicator lights up when signal switch to YPbPr state;  
7. HDMI1: Indicator lights up when signal switch to HDMI 1 state;  
8. HDMI2: Indicator lights up when signal switch to HDMI 2 state;  
(Signal switch to SDI state under the SDI mode);  
9. F1-F4:4 user-definable buttons:  
Default functions:  
F1Peaking  
F2False Color  
F3Exposure  
F4Histogram  
10. Knob BRI/M/SEL: Press the knob to access the menu function, pressing  
the knob in the menu to return to the previous page or exit the menu.  
Rotate knob to select an option;  
Default as Brightness function.  
11. Knob SAT/ADJ: Press the knob to select main MENU options; rotate knob  
to confirm the selection and adjust parameter values;  
Default as Saturation function.  
12. Knob TINT: Default as Tint function;  
13. Knob CONTRAST: Default as Contrast function.  
2
 
Optional: Without BNC interfaces  
14. Video signal output / input (Optional: SDI signal input/ output);  
15. Y signal input / output;  
16. Pb signal input / output;  
17. Pr signal input / output;  
18. Audio (L/R) input;  
19. HDMI 1 signal input;  
20. HDMI 2 signal input (no use under SDI mode );  
21. HDMI signal loop output (optional);  
22. Mini USB input (Only for program upgrades, do NOT use if  
non-professionals)  
23. Power cable interface (connecting to the battery plate);  
24. Speaker;  
25. TALLY signal input;  
26. USB output port (DC 5V/0.5A)  
27. 4-pin XLR DC power input.  
Pin number Signal  
GND  
②③  
……...  
+12V  
Ps: Unavailable under SDI mode 26 (USB 5V/0.5A output power).  
3
2. INSTALLATION OF SUNSHADE  
COVER  
Pushing to close / open sunshade from assigned round area when assembly /  
disassembly. i.e. assembly instruction / disassembly instruction );  
otherwise assembly / disassembly failed, and even damaged.  
Assembly instructions  
Push to close  
Disassembly instructions  
Push to open  
4
 
3. DV BATTERY MOUNT PLATE  
Standard mounts process  
Following three types of battery plates are suitable for this device, model F970,  
QM91D, DU21 & LP-E6 (choose 2 out of 4).  
MODEL: F-970  
MODEL: QM91D  
MODEL: DU21  
MODEL: LP-E6  
DV Battery Mount Plate:  
DV Battery Mount Plate Specification:  
Model DU21 for battery of Panasonic DV:  
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with  
Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi  
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.  
Model QM91D for battery of SONY DV:  
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV11  
6/DCR-DVD/PS105K/300K/10P/1E series.  
5
 
Model F970 for battery of SONY DV:  
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,  
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E,  
HVR-Z1C, HVR-V1C, FX7E F330.  
Model LP-E6 for battery of Canon DSLR:  
5D Mark II/EOS7D/EOS60D;  
V-mount battery plate (optional): Please refer to GP-L130AB type  
battery specifications.  
Anton Bauer mount battery plate (optional): Please refer to  
GP-L130B type battery specifications.  
6
4. SETTING MENU  
Before setting the functions, please make sure the device is connected correctly.  
When power on, press BRI/M/SEL knob on the device, function menus will  
pop-up on the screen. After confirm the option value, then press BRI/M/SEL  
knob to return to the previous, and press the BRI/M/SEL knob again to exit the  
menu settings.  
BRI / M / SEL knob to select an option.  
SAT / ADJ knob to select the main menu, adjusting option values and  
confirm the selection.  
ITEMS  
OPTIONS  
Color Temp  
6500ºK/7300 ºK/9300 ºK/User  
Red  
Green  
Blue  
Note: Only available  
under “User” mode to  
meet the color value you  
need.  
Check Field  
OFFMONORed, Green and  
Blue  
Aspect Ratio Full Screen and 16:9  
Pixel-to-Pixel ON/OFF  
Camera  
480P (5DII Mode) / 1080I (5DIII Mode)  
H/V delay  
OFF,H&V Delay, V Delay and H  
Delay  
Underscan  
ON/OFF  
ITEMS  
OPTIONS  
Center Marker  
Screen Markers  
ON/OFF  
OFF,95%,93%,90%,88%,85%  
and80%  
7
 
ITEMS  
OPTIONS  
Language  
English /Chinese  
PIP  
Small, Medium, Large, PBP,  
POP  
In small, medium and large  
interface can adjust the source,  
position, and swap;  
In PBP and POP interface can  
adjust the source and swap.  
Input Format  
OSD  
5s10s15s  
LOGO  
ON/ OFF  
Freeze Input  
Peaking  
ON/ OFF  
Mono/ Color  
Assistant Func. Manual/ Auto  
Manufacturer  
Default  
ISP  
OK/Cancel(Reverse the SAT / A  
DJ knob to select "OK")  
For program upgrades (Please  
reboot your computer if press  
accidentally!)  
Function of buttons and knobs can be customized by usersneeds.  
Functions of F1-F4 buttons can also be customized:  
·Aspect Ratio·Check Field·Freeze Input·Center Marker  
·Underscan ·H/V delay ·Color Bar ·Screen Marker  
·Zoom  
·Camera  
·Pixel-to-Pixel·PIP  
·Peaking  
·False Color·Exposure ·Histogram.  
Functions of R1-R4 buttons can also be customized:  
·Contrast  
·Brightness  
·Saturation  
·Tint  
·Volume  
·Sharpness  
Note: Off, camera, X2, X4 and X8 options can be set when zoom function customized as shortcut key.  
8
5. ACCESSORIES:  
Standard accessories:  
1. Flexible folding sun shade cover  
2. Battery plate bracket  
1 piece  
1 piece  
3. Battery plate (F-970/QM91D/DU21/LP-E6)  
4. HDMI type A –A  
5. DC 12V power adapter (XLR connector)  
6. TALLY connector  
2 pieces (choose 2 out of 4)  
1 piece  
1 piece  
1 piece  
1 copy  
7. Manual  
Optional accessories:  
1. Gimbals bracket  
1 piece  
2. Anton Bauer mount battery plate  
3. V-mount battery plate  
4. Suitcase  
1 piece  
1 piece  
1 piece  
9
 
6. PARAMETERS  
Panel  
9.7”  
Physical Resolution  
Brightness  
1024×768  
400cd/㎡  
Contrast  
600:1  
Viewing Angle  
Input Voltage  
Power Consumption  
178°/ 178°(H/V)  
DC 12V (XLR Connector)  
≤18W  
Operating Temperature -20~60℃  
Storage Temperature  
Dimension(LWD)  
Weight  
-30~70℃  
246×224×31mm / 167.5mm (with cover open)  
1068g / 1388g (with cover)  
7. TROUBLE SHOOTING  
1. Only black-and-white display:  
- Check whether the color saturation is properly setup.  
2. Power on but no pictures:  
- Check whether the cables of Video (or SDI), HDMI and YPbPr are correctly  
connected or not. Please use the standard power adapter coming with the  
product package. Improper power input may cause damage.  
3. Wrong or abnormal colors:  
- Check whether the cables are correctly and properly connected. Broken or  
loose pins of the cables may cause a bad connection.  
- Adjust the color temperature or saturation values to make it displayed as  
normal proportion.  
4. When on the picture shows size error:  
- pressMENU→  
Underscanto zoom in/out pictures automatically  
when receiving HDMI (High-Definition Multimedia Interface) signals.  
- Set shortcut key to zoom function, and then adjust it.  
- Check whether the aspect ratio switch into 16:9 or not.  
5. Other problems:  
-
Please press “MENU” button and choose  
Manufacturer Default  
→OK”  
6. According to the ISP, the machine can not function properly:  
- ISP for program upgrades, non-professionals do not use. If accidentally press  
this key, restart the system.  
10  
   
* It is normal to see some bright lines appear on the screen when turn off the  
device.  
Note: due to constant effort to improve products and product features,  
specifications may change without notice.  
11  

Xerox 420 User Manual
Whirlpool Ach184 User Manual
Sanyo Ths4232 User Manual
Samsung Aw2406b User Manual
NEC MULTISYNC X554UN User Manual
LG LRBP1031W User Manual
LEVOIT CORE 400S User Manual
DELL 1450 User Manual
BROTHER HL L2340DW User Manual
BLONDER TONGUE BIDA 55A 43P User Manual