DELVCAM DELV 12GSDI 15 User Manual

DELV12GSDI15  
User Guide  
15.6” 4K 12GSDI Mulformat Monitor  
with Road Ready Case Supports 4K Quad Link  
SPECIFICATIONS  
Display Screen: 15.6 inch IPS LCD  
Backlight: LED  
Resolution: 3840x2160  
Brightness: 330cd/m²  
Contrast 1000:1  
Aspect Ratio: 16:9  
Viewing Angle: 176°/ 176°(H/V)  
Input Signal: 12G-SDI, 3G-SDI, HDMI 4K 60Hz, HDMI 1.4 4K 30Hz  
Output Signal: 12G-SDI, 3G-SDI Loop  
Audio: Audio Level Meter (SDI only)/Headphone Jack /Speaker 1 Watt  
Input Voltage: 12-24VDC (XLR)  
Power Consumption: 34W  
15.3x10.5x1.5 in (20.6x12x6.7 in with case)  
Dimensions (LxHxD):  
389×267×38mm (524 x 305 x 170mm with case)  
7.1 lb (6.5 lb with case)  
Weight:  
3.2 kg (2 kg with case)  
SUNSHADE INSTALLATION  
Place the sunshade on the outside edge of the carrying case and press Velcro into place.  
Delvcam DELVDELV12GSDI15  
Page 3  
MONITOR FRONT  
1
2
3
4
5
6
7
8
9
10  
1 Speaker  
2 SDI Select:  
SINGLE—12G-SDI 1, 12G-SDI 2, 3G-SDI 3, 3G-SDI 4  
2SI—Dual-Link 2SI, Quad-Link 2SI  
SQUARE—Quad-Link Square Division Mode  
3 HDMI—Select Input  
4 MENU/RETURN  
5 Select options in the menu. Before entering the menu, press once to activate volume, press again to scroll  
through options.  
6 Select options in the menu.  
7 EXIT Back or exit  
8 F1-F4 User definable buttons Default function options:  
F1 Display Mode, F2 Display Rotate, F3 Safety Marker, F4 Aspect  
9 Power Indicator Light  
Red: Standby, Green: Working  
10 Earphone Jack  
Delvcam DELVDELV12GSDI15  
Page 4  
MONITOR REAR  
1
2
3
4
1 Carrying handle  
2 Strain relief bar  
3 USB port—FACTORY USE ONLY  
4 TALLY input  
5
6
5 SDI input (BNC)  
6 SDI output (BNC) - corresponds to SDI input  
7 HDMI input  
HDMI 1: HDMI 2.0, 4K 60Hz  
HDMI 2, 3, & 4: HDMI 1.4, 4K 30Hz  
8 15VDC power supply XLR connector  
9 Power Switch  
7
Pin number  
Signal  
GND  
8
9
……...  
+15V  
②③  
Delvcam DELVDELV12GSDI15  
Page 5  
◄►  
VOLUME OPERATION  
◄►  
Use the  
buttons for volume control.  
MENU OPERATION  
Turn the power ON. Press the “MENU“ button to access first level options:  
Picture  
Functions  
Display Mode  
Display Settings  
Input  
Audio  
System  
Information  
◄►  
Use  
buttons to highlight the desired option. Press “MENU” button to confirm. Press “EXIT” button to return / exit menu.  
F1 - F4 USER DEFINABLE SHORTCUT BUTTONS  
Press and hold any one of the 4 buttons until the shortcut menu appears. Current option will be highlighted in white.  
◄►  
Using the  
buttons, cycle through the options, which will be yellow, unavailable options will be gray. Press the “MENU”  
button to set the selected option.  
Available options: center marker, safety marker, aspect ratio, under scan, check field, image freeze, peaking, display mode  
and image flip.  
Default options  
F1Display Mode  
F2Display Rotate  
F3Safety Marker  
F4 : Aspect  
Delvcam DELVDELV12GSDI15  
Page 6  
SETTINGS  
Picture  
Brightness  
Contrast  
0-100  
0-100  
Saturation  
Hue  
0-100  
0-100  
Sharpness  
Temperature  
Backlight  
Center Marker  
0-4  
9300, 7500, 6500, 5800, User  
0-100  
ON, OFF  
Safety Marker  
Aspect Marker  
OFF, 95%, 93%, 90%, 88%, 85%, 80%  
Full17:9, 16:9, 4:31.85:12.35:1  
Aspect  
Full17:9, 16:9, 4:31.85:12.35:1  
Underscan  
ON, OFF  
Functions  
Pixel to Pixel  
Check Field  
ON, OFF  
OFF, Red, Green, Blue  
ON, OFF  
Freeze Input  
Peaking  
ON, OFF (image edge enhancement)  
ON, OFF  
False Color  
1P, 2P LR, 2P TB, 2P PIP, 4P  
Display Mode  
Display Rotate  
Display Mirror  
Set to region  
0°, 90°, 180°, 270°, available in single display  
OFF, L/R, U/D, available in dual display  
Display Settings  
Select Region  
Input  
SDI 1, SDI 2 , SDI 3 , SDI 4, 2SI, SQUARE, HDMI 1, HDMI 2, HDMI 3, HDMI 4  
Volume  
0-100  
CH0&CH1, CH2&CH3, CH4&CH5, CH6&CH7, CH8&CH9,  
CH10&CH11, CH12&CH13, CH14&CH15 (SDI ONLY)  
Audio Level Meter—SDI ONLY  
Audio  
Reset  
Resets to default  
5-60s  
Menu Time  
OSD H Position  
OSD V Position  
Language  
0-100  
0-100  
System  
English, Chinese  
0-255  
Transparency  
OSD Rotate  
0°, 90°, 270°  
0-10  
Border Width  
Border Color  
Displays current information  
R, G, B, W  
Info  
Delvcam DELVDELV12GSDI15  
Page 7  
SDI SIGNAL CONNECTION  
Input Signals  
 Up to 2-channel, single link 12G-SDI  
 Up to 4-channel 3GHD-SDI  
 1 channel quad-link 3G-SDI  
Refer to the tables below for the appropriate connectors for each signal.  
12G-SDI Single Link Signal  
Connector  
SDI 1  
Input Signal  
12G-SDI  
SDI 2  
12G-SDI  
3G-SDI Dual Link Signal  
Interleave  
3G-SDI Dual Link Signal  
Square Division  
Connector  
SDI 1  
Input Signal  
Connector  
SDI 1  
Input Signal  
3G-SDI Link 1  
3G-SDI Link 2  
Sub Image 1, Upper Left Screen/Sub Image 2, Lower Left Screen  
Sub Image 3, Upper Right Screen/Sub Image 4, Lower Right Screen  
SDI 2  
SDI 2  
12G-SDI Single Link Signal  
Square Division  
Quad Link 3G/HD-SDI Signal  
Interleave  
Square Division Screen View  
Connector  
SDI 1  
Input Signal  
Connector  
SDI 1  
Input Signal  
Sub Image 1  
Upper Left Screen Upper Right Screen  
Sub Image 3  
Sub Image 1, Upper Left Screen  
Sub Image 2, Lower Left Screen  
Sub Image 3, Upper Right Screen  
Sub Image 4, Lower Right Screen  
3G-SDI Link 1  
3G-SDI Link 2  
3G-SDI Link 3  
3G-SDI Link 4  
SDI 2  
SDI 2  
Sub Image 2  
Lower Left Screen Lower Right Screen  
Sub Image 4  
SDI 3  
SDI 3  
SDI 4  
SDI 4  
Signal Formats  
4:2:2 YCbCr 10 bits  
SDI-SDI 525i, 625i  
4:2:2 YCbCr 10bits  
1280×720 (23.98/24/25/29.97/30/50/59.94/60p)  
HD-SDI  
1920×1080 / 2048×1080 (50/59.94/60i) (23.98/29.97/24/25/30p)  
(23.98/29.97/24/25/30Psf)  
4:2:2 YCbCr 10bits  
1920×1080/2048×1080 (47.95/48/50/59.94/60p)  
3G-LevelA/DL 3G-Level B  
3G-LevelA/DL 3G-Level B  
1920×1080/2048×1080 (50/59.94/60i) (23.98/24/25/29.97/30p)  
(23.98/24/25/29.97/30Psf)  
4:4:4 GBR 10bits  
4:4:4 GBR+A 10bits  
4:4:4 YCbCr 10bits  
4:4:4 YCbCr+A 10bits  
4:4:4 GBR 12bits  
4:4:4 YCbCr 12bits  
3G-SDI  
4:4:4 GBR 10bits  
3G-LevelA/DL 3G-Level B  
1280×720 (23.98/24/25/29.97/30/50/59.94/60p)  
4:4:4 GBR+A 10bits  
4:4:4 YCbCr 10bits  
4:4:4 YCbCr+A 10bits  
1920×1080/2048×1080 (50/59.94/60i) (23.98/24/25/29.97/30p)  
(23.98/24/25/29.97/30Psf)  
4:2:2 YCbCr 10bits  
DS 3G-Level B  
DS 3G-Level B  
4:2:2 YCbCr 10bits  
1280×720 (23.98/24/25/29.97/30P  
Delvcam DELVDELV12GSDI15  
Page 8  
SDI SIGNAL CONNECTION  
Signal Formats  
4:2:2 YCbCr 10bits  
3840×2160/4096×2160 (23.98/24/25/29.97/30p)  
4:4:4 GBR 10bits  
4:4:4 GBR+A 10bits  
4:4:4 YCbCr 10bits  
4:4:4 YCbCr+A 10bits  
4:4:4 GBR 12bits  
4:4:4 YCbCr 12bits  
4:2:2 YCbCr 12bits  
1920×1080/2048×1080 (47.95/48/50/59.94/60p)  
6G-SDI Single Link  
3840×2160/4096×2160 (47.95/48/50/59.94/60p)  
3840×2160/4096×2160 (23.98/24/25/29.97/30p)  
4:2:2 YCbCr 10bits  
4:4:4 GBR 10bits  
4:4:4 GBR+A 10bits  
4:4:4 YCbCr 10bits  
4:4:4 YCbCr+A 10bits  
4:4:4 GBR 12bits  
4:4:4 YCbCr 12bits  
4:2:2 YCbCr 12bits  
3840×2160/4096×2160 (47.95/48/50/59.94/60p)  
3840×2160/4096×2160 (23.98/24/25/29.97/30p)  
4:2:2 YCbCr 10bits  
4:4:4 GBR 10bits  
4:4:4 GBR+A 10bits  
4:4:4 YCbCr 10bits  
4:4:4 YCbCr+A 10bits  
4:4:4 GBR 12bits  
4:4:4 YCbCr 12bits  
4:2:2 YCbCr 12bits  
12G-SDI Single Link  
4:2:2 YCbCr 10bits  
4:2:2 YCbCr 10bits  
4:2:2 YCbCr 10bits  
3840×2160/4096×2160 (23.98/24/25/29.97/30p)  
3840×2160/4096×2160 (23.98/24/25/29.97/30p)  
3840×2160/4096×2160 (23.98/24/25/29.97/30p)  
HD-SDI Quad Link  
3G-SDI Dual Link 2SI  
3G-SDI Dual Link  
Square Division  
4:2:2 YCbCr 10bits  
3840×2160/4096×2160 (47.95/48/50/59.94/60p)  
3840×2160/4096×2160 (23.98/24/25/29.97/30p)  
4:4:4 GBR 10bits  
4:4:4 GBR+A 10bits  
4:4:4 YCbCr 10bits  
4:4:4 YCbCr+A 10bits  
4:4:4 GBR 12bits  
4:4:4 YCbCr 12bits  
4:2:2 YCbCr 12bits  
3G-SDI Quad Link  
Square Division  
4:2:2 YCbCr 10bits  
3840×2160/4096×2160 (47.95/48/50/59.94/60p)  
3840×2160/4096×2160 (23.98/24/25/29.97/30p)  
4:4:4 GBR 10bits  
4:4:4 GBR+A 10bits  
4:4:4 YCbCr 10bits  
4:4:4 YCbCr+A 10bits  
4:4:4 GBR 12bits  
4:4:4 YCbCr 12bits  
4:2:2 YCbCr 12bits  
3G-SDI Quad Link 2SI  
Delvcam DELVDELV12GSDI15  
Page 9  
TROUBLE SHOOTING  
1. No Image  
- Ensure that the power is on and the cables are properly connected.  
- Use the standard power adapter that is included as improper voltage  
input may cause damage or injury.  
2. Incorrect or Abnormal Colors  
- Ensure that the cables are properly connected.  
- Check the signal source video output.  
- Check Saturation for appropriate setting.  
- Reset image ratio.  
3. Image Size Error  
- Go to Menu/Function/Underscan to zoom in and out of pictures  
automatically for HDMI signals  
3. No Sound  
- Press the HDMI button.  
- Ensure that the cables are properly connected.  
- Check volume control.  
4. HDMI 1 No Signal  
- Activate the HDMI signal by pressing the HDMI 1 button for 3 to 5 seconds  

Whirlpool Acm052ps0 User Manual
Toshiba Mmk Ap0122h User Manual
Toshiba Carrier Rav Sp180at2 Ul User Manual
Soleus Air Soleusair Ky 32u User Manual
Philips Scb1480nb User Manual
Panasonic Quickdraw Mc V5725 User Manual
FUJITSU PRIMERGY TX200 S6 User Manual
BROTHER HL 4570CDWT 02 User Manual
BROTHER FAX 737MC User Manual
Blossom Sprinkler User Manual