User’s Guide
Dell UltraSharp U2715H
Model No.: U2715H
Regulatory model: U2715Hc
Contents
1
About Your Monitor .................................................. 5
Package Contents......................................................................5
Product Features........................................................................6
Identifying Parts and Controls.................................................7
Monitor Specifications ............................................................10
Plug and Play Capability..........................................................19
Universal Serial Bus (USB) Interface .................................... 20
LCD Monitor Quality and Pixel Policy..................................21
Maintenance Guidelines .........................................................22
2
3
4
Setting Up the Monitor...........................................23
Attaching the Stand .................................................................23
Connecting Your Monitor ......................................................23
Organizing Your Cables..........................................................29
Attaching the Cable Cover.................................................... 30
Removing the Monitor Stand................................................ 30
Removing the Cable Cover....................................................31
Wall Mounting (Optional) .......................................................31
Operating the Monitor............................................32
Power On the Monitor............................................................32
Using the Front Panel Controls.............................................32
Using the On-Screen Display (OSD) Menu.........................34
Setting the Maximum Resolution......................................... 48
Using the Tilt, Swivel, Vertical Extension, Rotation and
Dual Monitor Setup................................................................. 48
Adjusting the Rotation Display Settings of Your System..53
Troubleshooting ......................................................54
Self-Test.....................................................................................54
Built-in Diagnostics..................................................................55
Common Problems.................................................................56
Product-Specific Problems....................................................58
Universal Serial Bus (USB) Specific Problems.................... 60
Mobile High-Definition Link (MHL) Specific Problems.... 60
Contents
|
3
5
Appendix.................................................................... 61
FCC Notices (U.S. Only) and Other Regulatory
Information................................................................................61
Contact Dell ..............................................................................61
Setting Up Your Monitor.........................................................62
4
|
Contents
About Your Monitor
1
Package Contents
Your monitor ships with the components shown below. Ensure that you have
NOTE: Some items may be optional and may not ship with your monitor. Some
features or media may not be available in certain countries.
NOTE: To set up with any other stand, please refer to the respective stand setup
guide for setup instructions.
Monitor
∞
Stand
∞
Cable Cover
∞
∞
Power Cable (Varies by
Countries)
About Your Monitor
|
5
DP Cable (Mini-DP to
DP)
∞
∞
∞
USB 3.0 Upstream
Cable (Enables the USB
Ports on the Monitor)
Drivers and
Documentation Media
DellTM UltraSharp U2715H Monitor
Quick Setup Guide
∞
∞
Safety and Regulatory
Information
Factory calibration
report
∞
Product Features
The Dell UltraSharp U2715H flat panel display has an active matrix, Thin-Film
Transistor (TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor features
include:
U2715H: 68.5 cm (27 inch) viewable area display (measured diagonally). 2560 x
1440 resolution, plus full-screen support for lower resolutions.
∞
∞
Wide viewing angle to allow viewing from a sitting or standing position, or while
moving from side-to-side.
Tilt, swivel, vertical extension and rotate adjustment capabilities.
∞
∞
Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling easier
set up with an elegant viewing experience.
Removable stand and Video Electronics Standards Association (VESA™) 100 mm
mounting holes for flexible mounting solutions.
∞
∞
Extensive all digital connectivity with DisplayPort, mini DisplayPort, HDMI (MHL),
USB 3.0 helps future proof your monitor.
Plug and play capability if supported by your system.
∞
∞
∞
≤
99% sRGB Coverage with an average delta E 3.
On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
Software and documentation media includes an Information File (INF), Image
Color Matching File (ICM), and product documentation.
∞
6
|
About Your Monitor
Dell Display Manager Software included (comes in the CD shipped with the
monitor).
∞
Energy Saver feature for Energy Star compliance.
Security lock slot.
∞
∞
∞
∞
Stand lock.
Capability to switch from wide aspect to standard aspect ratio while maintaining
the image quality.
EPEAT Gold Rating.
∞
∞
∞
∞
∞
∞
∞
∞
U2715H monitor is BFR/PVC-free (Halogen-free) excluding external cables.
TCO-Certified Displays.
Meets NFPA 99 leakage current requirements.
Arsenic-Free glass and Mercury-Free for the panel only.
High Dynamic Contrast Ratio (2,000,000:1).
0.5 W standby power when in the sleep mode.
Energy Gauge shows the energy level being consumed by the monitor in real
time.
Analogue backlight dimming control for flicker free display.
∞
Identifying Parts and Controls
Front View
1
2 3
Front panel controls
Label
1
Description
Function buttons (For more information, see
2
3
Power LED indicator
Power On/Off button
About Your Monitor
|
7
Back View
Back View with monitor stand
Use
Label
Description
1
VESA mounting holes (100 mm x 100 Wall mount monitor using VESA-
mm - behind attached VESA Cover) compatible wall mount kit (100 mm x
100 mm).
2
3
4
Regulatory label
Lists the regulatory approvals.
Releases stand from monitor.
Stand release button
Security lock slot
Secures monitor with security lock
(security lock not included).
5
Service tag label
The Dell service tag is used for Dell
warranty and customer service
management purposes and for
records of the base system.
6
7
Barcode serial number label
USB downstream port*
Refer to this label if you need to
contact Dell for technical support.
Connects your USB device. You can
only use this connector after you
have connected the USB cable to
the computer and USB upstream
connector on the monitor.
8
Cable management slot
Uses to organize cables by placing
them through the slot.
* It is recommended to use this port for your wireless USB device whenever possible.
8
|
About Your Monitor
Side View
Bottom View
Bottom view without monitor stand
Description
Label
Use
1
AC power cord connector Connect the power cable.
2
Dell Soundbar mounting Attach the optional Dell Soundbar.
slots
NOTE: Please remove the plastic strip covering
the mounting slots before affixing the Dell
Soundbar.
3
4
HDMI (MHL) port
connector
Connect your MHL devices with MHL cable.
Stand lock feature
To lock the stand to the monitor using a M3 x 6
mm screw (screw not included).
5
6
DisplayPort in connector Connect your computer with DP cable.
Mini DisplayPort in
connector
Connect your computer with Mini-DP to DP
cable.
About Your Monitor
|
9
7
DisplayPort out (MST)
connector
DisplayPort output for MST (Multi-Stream
Transport) capable monitor. DP 1.1 monitor can
only be connected as the last monitor in the
MST chain. To enable MST, refer to instruction
on section "Connecting the monitor for DP
8
9
Audio-Line out
Connect your speakers*.
USB upstream port
Connect the USB cable that came with your
monitor to the computer. Once this cable is
connected, you can use the USB connectors on
the monitor.
10
(a,b)
USB downstream port
Connect your USB device. You can only use
this connector after you have connected the
USB cable to the computer and USB upstream
connector on the monitor.**
* Headphone usage is not supported for the audio line out connector.
** It is recommended to use either the port (10b) or the USB downstream port on the
rear side for your wireless USB device whenever possible.
Monitor Specifications
Flat Panel Specifications
Model
U2715H
Screen type
Panel type
Viewable image
Diagonal
Active matrix - TFT LCD
In Plane Switching
684.70 mm (27 inches)
596.74 mm (23.49 inches)
335.66 mm (13.21 inches)
Horizontal, Active Area
Vertical, Active Area
Area
200301.75 mm2 (310.47 inch2)
0.2331 mm
Pixel pitch
Viewing angle
178° (vertical) typical, 170° (vertical) Min
178° (horizontal) typical, 170° (horizontal) Min
350 cd/m² (typical), 50 cd/m² (min)
1000 to 1 (typical), 700 to 1(Min)
Luminance output
Contrast ratio
2M to 1 (typical Dynamic Contrast On)
Anti-Glare with 3H hardness
LED edgelight system
Faceplate coating
Backlight
10
|
About Your Monitor
Response time
FAST mode: 6 ms gray to gray (typical)
NORMAL mode: 8 ms gray to gray (typical)
On/Off: 19 ms black to white (typical)
16.78 million colors
Color depth
Color gamut
CIE 1976 (91%), CIE 1931 (76%) and sRGB
coverage 99%
Resolution Specifications
Model
U2715H
Horizontal scan range
Vertical scan range
Maximum preset resolution
30 kHz to 113 kHz (automatic)
56 Hz to 86 Hz (automatic)
2560 x 1440 at 60 Hz
Supported Video Modes
Model
U2715H
Video display capabilities (HDMI 480p, 480i, 576p, 720p, 1080p, 576i, 1080i
& DP playback)
Preset Display Modes
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock Sync Polarity
(MHz)
(Horizontal /
Vertical)
VESA, 720 x 400
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1152 x 864
VESA, 1280 x 1024
VESA, 1280 x 1024
VESA, 1600 x 1200
VESA, 1920 x 1080
VESA, 2560 x 1440
31.5
31.5
37.5
37.9
46.9
48.4
60.0
67.5
64.0
80.0
75.0
67.5
88.8
70.1
60.0
75.0
60.3
75.0
60.0
75.0
75.0
60.0
75.0
60.0
60.0
60.0
28.3
25.2
-/+
-/-
31.5
-/-
40.0
49.5
+/+
+/+
-/-
65.0
78.8
+/+
+/+
+/+
+/+
+/+
+/+
+/-
108.0
108.0
135.0
162.0
148.5
241.5
About Your Monitor
|
11
MHL Source Display Modes
Display Mode
640 x 480p
Frequency (Hz)
60
60
50
60
50
60
50
30
60
50
60
50
720 x 480p
720 x 576p
1280 x 720p
1280 x 720p
1920 x 1080i
1920 x 1080i
1920 x 1080p
1920 x 1080p
1920 x 1080p
720 (1440) x 480i
720 (1440) x 576i
MST Multi-Stream Transport (MST) Modes
MST Source Monitor
Maximum number of external monitor that can be
supported
2560x1440/60Hz 1920x1200/60Hz 1920x1080/60Hz
2560 x 1440/ 60Hz
1
2
2
Electrical Specifications
Model
U2715H
Video input signals
HDMI 1.4 (MHL 2.0)*, 600mV for each
differential line, 100 ohm input impedance per
differential pair
∞
DisplayPort 1.2**, 600mV for each differential
line, 100 ohm input impedance per differential
pair
∞
AC input voltage/frequency/
current
100 VAC to 240 VAC / 50 Hz or 60 Hz 3 Hz / 1.5
A (typical)
Inrush current
120 V: 40 A (Max.) at 0 °C (cold start)
240 V: 80 A (Max.) at 0 °C (cold start)
∞
∞
* Does not support HDMI 1.4 optional specification, includes HDMI Ethernet Channel
(HEC), Audio Return Channel (ARC), standard for 3D format and resolutions, standard
for 2K and 4K digital cinema resolution.
** Supports DP1.2 (CORE) specification, include HBR2, MST and DP audio.
12
|
About Your Monitor
Physical Characteristics
Model
U2715H
Connector type
DP, black connector (includes DP in and DP out);
Mini DisplayPort; HDMI (MHL); USB 3.0
Signal cable type
Digital: detachable, HDMI, 19 pins
∞
∞
∞
∞
Digital: detachable, MHL, 19 pins
Digital: detachable, Mini-DP to DP, 20 pins
Universal Serial Bus: detachable, USB, 9 pins
Dimensions (with stand)
Height (extended)
Height (compressed)
Width
524.9 mm (20.67 inches)
409.9 mm (16.14 inches)
612.7 mm (24.12 inches)
205.0 mm (8.07 inches)
Depth
Dimensions (without stand)
Height
363.4 mm (14.31 inches)
612.7 mm (24.12 inches)
46.4 mm (1.83 inches)
Width
Depth
Stand dimensions
Height (extended)
Height (compressed)
Width
418.0 mm (16.46 inches)
371.6 mm (14.63 inches)
245.0 mm (9.65 inches)
205.0 mm (8.07 inches)
Depth
Weight
Weight with packaging
10.47 kg (23.03 lb)
Weight with stand assembly and 7.38 kg (16.24 lb)
cables
Weight without stand assembly
(For wall mount or VESA mount
considerations - no cables)
4.91 kg (10.08 lb)
Weight of stand assembly
Front frame gloss
2.11 kg (4.64 lb)
Black Frame - 13 gloss unit (max.)
About Your Monitor
|
13
Environmental Characteristics
Model
U2715H
Temperature
Operating
0 °C to 40 °C (32 °F to 104 °F)
Non-operating
Storage: -20 °C to 60 °C (-4 °F to 140 °F)
Shipping: -20 °C to 60 °C (-4 °F to 140 °F)
∞
∞
Humidity
Operating
10% to 80% (non-condensing)
Non-operating
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90% (non-condensing)
∞
∞
Altitude
Operating
5,000 m (16,400 ft) (maximum)
12,192 m (40,000 ft) (maximum)
Non-operating
Thermal dissipation
300.08 BTU/hour (maximum)
109.12 BTU/hour (typical)
∞
∞
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC,
the monitor can automatically reduce its power consumption when not in use. This
is referred to as Power Save Mode*. If the computer detects input from the keyboard,
mouse or other input devices, the monitor automatically resumes functioning. The
following table shows the power consumption and signaling of this automatic power
saving feature.
* Zero power consumption in OFF mode can only be achieved by disconnecting the
main cable from the monitor.
VESA
Modes
Horizontal Vertical
Sync Sync
Video
Power
Indicator
Power
Consumption
Normal
Active
Active
Active
White
88 W (maximum)**
operation
36 W (typical)
Active-off
mode
Inactive
-
Inactive
-
Blanked
-
White
(Glowing )
Less than 0.5 W
Switch off
Off
Less than 0.5 W
** Maximum power consumption with max luminance and USB active.
The OSD functions only in the normal operation mode. When any button is pressed
in the Active-off mode, one of the following messages will be displayed:
14
|
About Your Monitor
Dell U2715H
There is no signal coming from your computer. Press any key on the
keyboard or move the mouse to wake it up. If there is no display, press the
monitor button now to select the correct input source on the On-Screen-
Display menu.
or
Dell U2715H
There is no signal coming from your device. Please activate your device to
wake it up. If there is no display, press the monitor button now to select
the correct input source on the On-Screen-Display menu.
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR®-compliant.
About Your Monitor
|
15
Pin Assignments
DisplayPort Connector
Pin
20-pin Side of the Connected
Number Signal Cable
1
2
ML0(p)
GND
3
ML0(n)
ML1(p)
GND
4
5
6
ML1(n)
ML2(p)
GND
7
8
9
ML2(n)
ML3(p)
GND
10
11
12
13
14
15
16
17
18
19
20
ML3(n)
GND
GND
AUX(p)
GND
AUX(n)
GND
Re-PWR
+3.3 V DP_PWR
16
|
About Your Monitor
Mini DisplayPort Connector
Pin
20-pin Side of the Connected
Number Signal Cable
1
2
GND
Hot Plug Detect
ML3(n)
GND
3
4
5
ML3(p)
GND
6
7
GND
8
GND
9
ML2(n)
ML0(n)
ML2(p)
ML0(p)
GND
10
11
12
13
14
15
16
17
18
19
20
GND
ML1(n)
AUX(p)
ML1(p)
AUX(n)
GND
+3.3 V DP_PWR
About Your Monitor
|
17
HDMI Connector
Pin
19-pin Side of the Connected
Number Signal Cable
1
2
TMDS DATA 2+
TMDS DATA 2 SHIELD
TMDS DATA 2-
3
4
TMDS DATA 1+
5
TMDS DATA 1 SHIELD
TMDS DATA 1-
6
7
TMDS DATA 0+
TMDS DATA 0 SHIELD
TMDS DATA 0-
8
9
10
11
12
13
14
15
16
17
18
19
TMDS CLOCK+
TMDS CLOCK SHIELD
TMDS CLOCK-
CEC
Reserved (N.C. on device)
DDC CLOCK (SCL)
DDC DATA (SDA)
DDC/CEC Ground
+5V POWER
HOT PLUG DETECT
18
|
About Your Monitor
MHL Connector
Pin
19-pin Side of the Connected
Number Signal Cable
1
2
TMDS DATA 2+
TMDS DATA 2 SHIELD
TMDS DATA 2-
TMDS DATA 1+
GND
3
4
5
6
TMDS DATA 1-
MHL+
7
8
TMDS DATA 0 SHIELD
MHL-
9
10
11
12
13
14
15
16
17
18
19
TMDS CLOCK+
GND
TMDS CLOCK-
CEC
Reserved (N.C. on device)
DDC CLOCK (SCL)
DDC DATA (SDA)
GND
VBUS (+5V, 900mA maximum)
CBUS
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor
automatically provides the computer system with its Extended Display Identification
Data (EDID) using Display Data Channel (DDC) protocols so the system can configure
itself and optimize the monitor settings. Most monitor installations are automatic,
you can select different settings if desired. For more information about changing the
About Your Monitor
|
19
Universal Serial Bus (USB) Interface
This section gives you information about the USB ports that are available on the
monitor.
NOTE: This monitor is SuperSpeed USB 3.0 compatible.
Transfer Speed
Super-speed
High speed
Data Rate
5 Gbps
Power Consumption*
4.5 W (Max, each port)
4.5 W (Max, each port)
4.5 W (Max, each port)
480 Mbps
12 Mbps
Full speed
* Up to 2A on USB downstream port (port with
compliance devices or normal USB devices.
lightning icon) with BC1.2
USB Upstream Connector
Pin Number
9-pin Side of the Connector
1
2
3
4
5
6
7
8
9
VCC
D-
D+
GND
SSTX-
SSTX+
GND
SSRX-
SSRX+
20
|
About Your Monitor
USB Downstream Connector
Pin Number
9-pin Side of the Connector
1
2
3
4
5
6
7
8
9
VCC
D-
D+
GND
SSTX-
SSTX+
GND
SSRX-
SSRX+
USB Ports
1 upstream - back
5 downstream - back
Power Charging Port- the port with
∞
∞
∞
lightning icon; supports fast current
charging capability if the device is BC1.2 compatible.
NOTE: USB 3.0 functionality requires a USB 3.0-capable computer.
NOTE: The monitor's USB interface works only when the monitor is On or in the
power save mode. If you turn Off the monitor and then turn it On, the attached
peripherals may take a few seconds to resume normal functionality.
LCD Monitor Quality and Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more
pixels to become fixed in an unchanging state which are hard to see and do not affect
the display quality or usability. For more information on Dell Monitor Quality and Pixel
About Your Monitor
|
21
Maintenance Guidelines
Cleaning Your Monitor
WARNING: Before cleaning the monitor, unplug the monitor power cable from
the electrical outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning
or handling your monitor:
To clean your anti-static screen, lightly dampen a soft, clean cloth with water.
If possible, use a special screen-cleaning tissue or solution suitable for the anti-
static coating. Do not use benzene, thinner, ammonia, abrasive cleaners or
compressed air.
∞
Use a lightly-dampened, warm cloth to clean the monitor. Avoid using
detergent of any kind as some detergents leave a milky film on the monitor.
∞
∞
∞
∞
If you notice white powder when you unpack your monitor, wipe it off with a
cloth.
Handle your monitor with care as a darker-colored monitor may get scratched
and show white scuff marks more than a lighter-colored monitor.
To help maintain the best image quality on your monitor, use a dynamically
changing screen saver and turn Off your monitor when not in use.
22
|
About Your Monitor
Setting Up the Monitor
2
Attaching the Stand
NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: This is applicable for a monitor with a stand. When any other stand
is bought, please refer to the respective stand setup guide for the setup
instructions.
To attach the monitor stand:
1. Remove the cover and place the monitor on it.
2. Fit the two tabs on the upper part of the stand to the groove on the back of the
monitor.
3. Press the stand till it snaps into place.
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
NOTE: Do not connect all cables to the computer at the same time.
To connect your monitor to the computer:
1. Turn Off your computer and disconnect the power cable.
Connect the DP/Mini-DP to DP/HDMI/MHL cable from your monitor to the
computer.
Setting Up the Monitor
|
23
Connecting the HDMI cable
Connecting the MHL cable
Connecting the black DisplayPort (Mini-DP to DP) cable
24
|
Setting Up the Monitor
Connecting the black DisplayPort (DP to DP) cable
Connecting the monitor for DP Multi-Stream Transport (MST)
function
NOTE: U2715H supports the DP MST feature. To make use of this feature, your
PC Graphics Card must be certified to DP1.2 with MST option.
The default out of factory setting in the U2715H is DP1.1a.
To enable MST connection, please use only DP cable as provided in box (or other
DP1.2 certified cable) and change the DP setting to DP1.2 by performing the below
steps:
A) Monitor is able to show content
1.
Use OSD button to navigate to Display Settings.
Setting Up the Monitor
|
25
Dell U2715H
Brightness / Contrast
Energy Use
Wide 16:9
Aspect Ratio
Input Source
Color
50
Sharpness
Dynamic Contrast
Normal
Disable
Response Time
DP 1.2
Energy
Menu
Reset Display Settings
Personalize
Others
Resolution: 1920x1080, 60Hz
Maximum: 2560x1440, 60Hz
2. Go to DP 1.2 selection.
3. Select Enable or Disable accordingly
4. Follow the screen message to confirm selection of DP1.2 or DP1.1a.
Dell U2715H
Please ensure your Graphics Card can support DP MST(Daisy Chain)/
HBR2(High Bit Rate) before changing the monitor setting to DP1.2.
Incorrect setting may result in blank screen on monitor.
Confirm
Exit
Dell U2715H
DP MST/HBR2 will be disabled for DP1.1a
Confirm
Exit
26
|
Setting Up the Monitor
B) Monitor fails to show any content (blank screen)
1. Use the
and
button to highlight DP or mDP.
DP
mDP
2. Press and hold the
button for approximately 8 seconds.
3. The DisplayPort configuration message will appear:
Dell U2715H
DP 1.2?
Enable
Disable
4. Use the
button to enable DP1.2 or
button to exit without making any
changes.
Repeat the above steps to change the setting back to DP 1.1a if necessary.
CAUTION: The graphics are used for the purpose of illustration only.
Appearance of the computer may vary.
Setting Up the Monitor
|
27
Connecting the USB 3.0 cable
After you have completed connecting the Mini-DP to DP/DP/HDMI cable, follow the
procedures below to connect the USB 3.0 cable to the computer and complete your
monitor setup:
1. Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB 3.0
2. Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the
monitor.
3. Plug the power cables for your computer and monitor into a nearby outlet.
4. Turn On the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display
5. Use the cable slot on the monitor stand to organize the cables.
Using the (MHL) Mobile-High Definition Link
NOTE: This monitor is MHL certified.
NOTE: To use the MHL function, use only MHL-certified cable and source
devices that support MHL output.
NOTE: Some MHL source devices may take more than a few seconds or longer
to output an image, depending on MHL source devices.
NOTE: When the connected MHL source device enters Standby mode, the
monitor will display black screen or show the massage below, depending on
MHL source device's output.
Dell U2715H
Entering Power Save Mode.
To enable MHL connection, please perform the below steps:
28
|
Setting Up the Monitor
1. Plug the power cable of your monitor into an AC outlet.
2. Connect the (micro) USB port on your MHL source device to HDMI (MHL) 1 or
HDMI (MHL) 2 port on the monitor with a MHL-certified cable (See Bottom View
for details.)
3. Turn On the monitor and the MHL source device.
4. Select input source on monitor to HDMI (MHL) 1 or HDMI (MHL) 2 by using OSD
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See Connecting
Your Monitor for cable attachment,) organize all cables as shown above.
Setting Up the Monitor
|
29
Attaching the Cable Cover
NOTE: The cable cover is detached when the monitor is shipped from the
factory.
2
1
1. Fit the two tabs on the bottom part of the cable cover to the groove on the back
of the monitor.
2. Press the cable cover till it snaps into place.
Removing the Monitor Stand
NOTE: To prevent scratches on the LCD screen while removing the stand,
ensure that the monitor is placed on a soft, clean surface.
NOTE: This is applicable for a monitor with a stand. When any other stand
is bought, please refer to the respective stand setup guide for the setup
instructions.
3
2
To remove the stand:
1. Place the monitor on a soft cloth or cushion.
2. Press and hold the stand release button.
3. Lift the stand up and away from the monitor
30
|
Setting Up the Monitor
Removing the Cable Cover
1
2
1. Press the tab on the cable cover.
2. Remove the two tabs on the bottom part of the cable cover from the groove on
the back of the monitor.
Wall Mounting (Optional)
Service Tag:1NGTQV1
Express SVC code:359 576 607 77
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the VESA-compatible wall mounting kit.
1. Place the monitor panel on a soft cloth or cushion on a stable, flat table.
2. Remove the stand.
3. Use a Phillips crosshead screwdriver to remove the four screws securing the
plastic cover.
4.
Attach the mounting bracket from the wall mounting kit to the monitor.
5. Mount the monitor on the wall by following the instructions that comes with the
wall mounting kit.
NOTE: For use only with UL-listed wall mount bracket with minimum weight/
load bearing capacity of 4.91 kg.
Setting Up the Monitor
|
31
Operating the Monitor
3
Power On the Monitor
Press the
button to turn On the monitor.
Using the Front Panel Controls
Use the control buttons on the front of the monitor to adjust the characteristics of
the image being displayed. As you use these buttons to adjust the controls, an OSD
shows the numeric values of the characteristics as they change.
1
2 3
The following table describes the front panel buttons:
Front Panel Button
Description
1
Use this button to choose from a list of preset color
modes.
Shortcut key/Preset
Modes
32
|
Operating the Monitor
Use this button to directly access the Brightness/
Contrast menu.
Shortcut key/
Brightness/Contrast
Use the MENU button to launch the On-Screen
Display (OSD) and select the OSD Menu. See
Menu
Exit
Use this button to go back to the main menu or exit
the OSD main menu.
2
and
3
Use the Power button to turn the monitor On and Off.
The white light indicates the monitor is On and fully
functional. A glowing white light indicates the power
save mode.
Power (with power
light indicator)
Front Panel Button
Use the buttons on the front of the monitor to adjust the image settings.
Front Panel Button
Description
1
2
3
4
Use the Up button to adjust (increase ranges) items in
the OSD menu.
Up
Down
OK
Use the Down button to adjust (decrease ranges)
items in the OSD menu.
Use the OK button to confirm your selection.
Use the Back button to go back to the previous menu.
Back
Operating the Monitor
|
33
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or
exit the OSD menu, the monitor automatically saves those changes. The changes
are also saved if you change the settings and then wait for the OSD menu to
disappear.
1. Press the
button to launch the OSD menu and display the main menu.
Main Menu for digital (HDMI (MHL) 1/ HDMI (MHL) 2) input
Dell U2715H
Brightness / Contrast
Energy Use
Input Source
Color
Display
Energy
50
50
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Maximum: 2560x1440, 60Hz
or
Main Menu for digital (mini DisplayPort) input
Dell U2715H
Energy Use
Brightness / Contrast
Input Source
Color
Display
Energy
50
50
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Maximum: 2560x1440, 60Hz
or
34
|
Operating the Monitor
Main Menu for digital (DP) input
Dell U2715H
Energy Use
Brightness / Contrast
Input Source
Color
Display
Energy
50
50
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Maximum: 2560x1440, 60Hz
2. Press the
and
buttons to move between the setting options. As you move
from one icon to another, the option name is highlighted. See the following
table for a complete list of all the options available for the monitor.
3. Press the
button once to activate the highlighted option.
and button to select the desired parameter.
4. Press
5. Press
to enter the slide bar and then use the
and
buttons, according
to the indicators on the menu, to make your changes.
6. Select the
button to return to the main menu.
Operating the Monitor
|
35
Icon
Menu and
Submenus
Description
Brightness/
Contrast
Use this menu to activate Brightness/Contrast
adjustment.
Dell U2715H
Brightness / Contrast
Energy Use
Input Source
Color
Display
Energy
50
50
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Maximum: 2560x1440, 60Hz
Brightness
Contrast
Brightness adjusts the luminance of the backlight.
Press the button to increase the brightness and press
button to decrease the brightness (min. 0 / max.
the
100).
NOTE: Manual adjustment of Brightness is disabled when
Dynamic Contrast is switched On.
Adjust the Brightness first, and then adjust the Contrast
only if further adjustment is necessary.
Press the
button to increase the contrast and press the
button to decrease the contrast (min. 0 / max. 100).
The Contrast function adjusts the degree of difference
between darkness and lightness on the monitor screen.
36
|
Operating the Monitor
Input Source
Use the Input Source menu to select between the
different video signals that may be connected to your
monitor.
Dell U2715H
Brightness / Contrast
Energy Use
DP
Input Source
Color
mDP
HDMI(MHL) 1
HDMI(MHL) 2
Display
Energy
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Maximum: 2560x1440, 60Hz
DP
Select the DP input when you are using the DisplayPort
(DP) connector. Press to select the DP input source.
Select the mDP input when you are using the Mini
mDP
DisplayPort (Mini DP) connector. Press
to select the
mDP input source.
HDMI (MHL) 1 Select the HDMI (MHL) 1 or HDMI (MHL) 2 input when
HDMI (MHL) 2
you are using the HDMI connectors. Press
to select
the HDMI (MHL) 1 or HDMI (MHL) 2 input source.
Color
Use Color to adjust the color setting mode.
Dell U2715H
Brightness / Contrast
Energy Use
RGB
Input Color Format
Gamma
Input Source
Color
PC
Preset Modes
Standard
Display
Reset Color Settings
Energy
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Maximum: 2560x1440, 60Hz
Operating the Monitor
|
37
Input Color
Format
Allows you to set the video input mode to:
RGB: Select this option if your monitor is connected to
a computer (or DVD player) using the HDMI cable (or
DisplayPort cable) or MHL devices using MHL cable.
YPbPr: Select this option if your monitor is connected to
a DVD player by YPbPr using HDMI cable (or DisplayPort
cable) or MHL devices by YPbPr using MHL cable.
Or if the DVD (or MHL devices) color output setting is not
RGB.
Dell U2715H
Energy Use
RGB
Brightness / Contrast
Input Color Format
Gamma
Input Source
Color
YPbPr
Preset Modes
Display
Reset Color Settings
Energy
Menu
Personalize
Others
Maximum: 2560x1440, 60Hz
Resolution: 1920x1080, 60Hz
Gamma
Allows you to set the Gamma to PC or MAC.
Dell U2715H
Energy Use
Brightness / Contrast
Input Color Format
Gamma
Input Source
Color
PC
Preset Modes
MAC
Display
Reset Color Settings
Energy
Menu
Personalize
Others
Maximum: 2560x1440, 60Hz
Resolution: 1920x1080, 60Hz
38
|
Operating the Monitor
Preset Modes When you select Preset Modes, you can choose
Standard, Multimedia, Movie, Game, Paper, Color Temp.
or Custom Color from the list.
Standard: Loads the monitor's default color settings.
∞
This is the default preset mode.
Multimedia: Loads color settings ideal for multimedia
∞
applications.
Movie: Loads color settings ideal for movies.
∞
∞
Game: Loads color settings ideal for most gaming
applications.
Paper: Loads brightness and sharpness settings ideal
for viewing text. Blend the text background to simulate
paper media without affecting color images. Applies to
RGB input format only.
∞
Color Temp.: Allows users to select the color
temperature: 5000K, 5700K, 6500K, 7500K, 9300K and
10000K.
∞
∞
Custom Color: Allows you to manually adjust the color
settings.
Press the
and
buttons to adjust the three colors (R,
G, B) values and create your own preset color mode.
Dell U2715H
Brightness / Contrast
Energy Use
Input Color Format
Gamma
Input Source
Standard
Multimedia
Movie
Color
Preset Modes
Reset Color Settings
Display
Energy
Menu
Game
Paper
Personalize
Others
Color Temp.
Custom Color
Maximum: 2560x1440, 60Hz
Resolution: 1920x1080, 60Hz
Hue
This feature can shift the color of the video image to
green or purple. This is used to adjust the desired flesh
tone color. Use
'100'.
or
to adjust the hue from '0' to
Press
Press
to increase the green shade of the video image.
to increase the purple shade of the video image.
NOTE: Hue adjustment is available only when you select
Movie or Game preset mode.
Operating the Monitor
|
39
Saturation
This feature can adjust the color saturation of the video
image. Use
'100'.
or
to adjust the saturation from '0' to
Press
to increase the monochrome appearance of the
video image.
Press
to increase the colorful appearance of the video
image.
NOTE: Saturation adjustment is available only when you
select Movie or Game preset mode.
Reset Color
Settings
Reset your monitor color settings to the factory settings.
Display
Use the Display to adjust image.
Dell U2715H
Brightness / Contrast
Energy Use
Wide 16:9
50
Aspect Ratio
Sharpness
Input Source
Color
Dynamic Contrast
Display
Energy
Menu
Response Time
DP 1.2
Normal
Disable
Reset Display Settings
Personalize
Others
Resolution: 1920x1080, 60Hz
Maximum: 2560x1440, 60Hz
Aspect Ratio
Sharpness
Adjusts the image ratio to Wide 16:9, 4:3 or 5:4.
This feature can make the image look sharper or softer.
Use
or
to adjust the sharpness from '0' to '100'.
Response Time User can select between Fast or Normal.
Dynamic
Contrast
Allows you to increase the level of contrast to provide
sharper and more detailed image quality.
Press the
button to select the Dynamic Contrast "On"
or "Off".
NOTE: Dynamic Contrast provides higher contrast if you
select Game or Movie preset mode.
40
|
Operating the Monitor
DP 1.2
Press
to enable or disable DP 1.2.
To use the DP MST (Daisy Chain) or HBR2 feature, enable
DP 1.2.
NOTE: Ensure your Graphics Card can support these
features before selecting DP 1.2. Wrong setting may result
in blank screen. Some Graphics Cards do not support
MCCS (Monitor Control Command Set) at DP 1.2. In these
cases, DDM (Dell Display Manager) may not run.
Reset Display Select this option to restore default display settings.
Settings
Energy
Dell U2715H
Brightness / Contrast
Energy Use
On During Active
Oꢀ During Standby
Power Button LED
USB
Input Source
Color
Reset Energy Settings
Display
Energy
Menu
Personalize
Other
Resolution: 1920x1080, 60Hz
Maximum: 2560x1440, 60Hz
Power Button Allows you to set the power LED indicator On During
LED
Active or Off During Active to save energy.
USB
Allows you to enable or disable USB function during
monitor standby mode.
NOTE: USB on/off under standby mode is only available
when the USB upstream cable is unplugged. This option
will be greyed out when the USB upstream cable plugs in.
Reset Energy
Settings
Select this option to restore default Energy Settings.
Operating the Monitor
|
41
Menu
Select this option to adjust the settings of the OSD, such
as, the languages of the OSD, the amount of time the
menu remains on screen and so on.
Dell U2715H
Brightness / Contrast
Energy Use
English
Language
Rotation
Input Source
Color
Transparency
20
Display
Energy
Timer
20s
Lock
Unlock
Menu
Reset Menu Settings
Personalize
Others
Resolution: 1920x1080, 60Hz
Maximum: 2560x1440, 60Hz
Language
Rotation
Language options set the OSD display to one of the eight
languages (English, Spanish, French, German, Brazilian
Portuguese, Russian, Simplified Chinese or Japanese).
Rotates the OSD by 90 degrees counter-clockwise. You
Transparency Select this option to change the menu transparency by
pressing the
100).
and
buttons (Minimum: 0 ~ Maximum:
Timer
Lock
OSD Hold Time: sets the length of time the OSD will
remain active after the last time you pressed a button.
Use
or
to adjust the slider in 1 second increments,
from 5 to 60 seconds.
Controls user access to adjustments. When Lock is
selected, no user adjustments are allowed. All buttons are
locked.
NOTE:
Lock function – Either soft lock (through the OSD menu)
or hard lock (press and hold the button beside the power
button for 10 seconds)
Unlock function – Only hard unlock (press and hold the
button beside the power button for 10 seconds)
Reset Menu
Settings
Reset all OSD settings to the factory preset values.
42
|
Operating the Monitor
Personalize
Users can choose a feature from Preset Modes,
Brightness/Contrast, Input Source, Aspect Ratio or
Rotation and set it as a shortcut key.
Dell U2715H
Energy Use
Brightness / Contrast
Preset Modes
Shortcut Key 1
Input Source
Color
Shortcut Key 2
Brightness / Contrast
Input Source
Reset Personalization
Display
Aspect Ratio
Rotation
Energy
Menu
Personalize
Others
Maximum: 2560x1440, 60Hz
Resolution: 1920x1080, 60Hz
Shortcut Key 1 User can select one of the followings: Preset Modes,
Brightness/Contrast, Input Source, Aspect Ratio and
Rotation to set the Shortcut Key 1.
Shortcut Key 2 User can select one of the followings: Preset Modes,
Brightness/Contrast, Input Source, Aspect Ratio and
Rotation to set the Shortcut Key 2.
Reset
Allows you to restore shortcut key to the default setting.
Personalization
Others
Dell U2715H
Brightness / Contrast
Energy Use
Oꢀ
Button Sound
DDC/CI
Input Source
Color
Enable
Disable
LCD Conditioning
Display
Reset Other Settings
Factory Reset
Energy
Reset All Settings
Menu
Personalize
Others
Maximum: 2560x1440, 60Hz
Resolution: 1920x1080, 60Hz
Button Sound The monitor beeps everytime a new option is selected in
the menu. This feature enables or disables the sound.
Operating the Monitor
|
43
DDC/CI
DDC/CI (Display Data Channel/Command Interface)
allows your monitor parameters (brightness, color
balance and etc.) to be adjustable via the software on
your computer.
You can disable this feature by selecting Disable.
Enable this feature for best user experience and optimum
performance of your monitor.
Dell U2715H
Brightness / Contrast
Energy Use
Button Sound
DDC/CI
Input Source
Color
Enable
Disable
LCD Conditioning
Display
Reset Other Settings
Factory Reset
Energy
Menu
Personalize
Others
Maximum: 2560x1440, 60Hz
Resolution: 1920x1080, 60Hz
LCD
Helps reduce minor cases of image retention. Depending
Conditioning on the degree of image retention, the program may take
some time to run. You can enable this feature by selecting
Enable.
Dell U2715H
Energy Use
Brightness / Contrast
Button Sound
DDC/CI
Input Source
Color
LCD Conditioning
Enable
Disable
Display
Reset Other Settings
Factory Reset
Energy
Menu
Personalize
Others
Resolution: 1920x1080, 60Hz
Maximum: 2560x1440, 60Hz
Reset Other
Settings
Reset all settings under the Others setting menu to the
factory preset values.
Factory Reset Reset all settings to the factory preset values.
NOTE: This monitor has a built-in feature to automatically calibrate the
brightness to compensate for LED aging.
44
|
Operating the Monitor
OSD Warning Messages
When the Dynamic Contrast feature is enabled (in these preset modes: Game or
Movie), the manual brightness adjustment is disabled.
Dell U2715H
Do you wish to turn oꢀ Dynamic Contrast?
No
Yes
When the monitor does not support a particular resolution mode, you will see the
following message:
Dell U2715H
The current input timing is not supported by the monitor display. Please
change your input timing to 2560x1440, 60Hz or any other monitor
listed timing as per the monitor specifications.
This means that the monitor cannot synchronize with the signal that it is receiving
frequency ranges addressable by this monitor. Recommended mode is 2560 x 1440.
You will see the following message before the DDC/CI function is disabled:
Dell U2715H
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
No
Yes
Operating the Monitor
|
45
When the monitor enters the Power Save Mode, the following message appears:
Dell U2715H
Entering Power Save Mode.
If you press any button other than the power button, one of the following messages
will appear depending on the selected input:
HDMI (MHL)/mDP/DP input
Dell U2715H
There is no signal coming from your computer. Press any key on the
keyboard or move the mouse to wake it up. If there is no display, press
the monitor button now to select the correct input source on the
On-Screen-Display menu.
or
Dell U2715H
There is no signal coming from your device. Please activate your device to
wake it up. If there is no display, press the monitor button now to select
the correct input source on the On-Screen-Display menu.
If either HDMI (MHL), mDP or DP input is selected and the corresponding cable is not
connected, a floating dialog box as shown below appears.
Dell U2715H
or
46
|
Operating the Monitor
Dell U2715H
No HDMI (MHL) 2 Cable
The dispaly will go into Power Save Mode in 5 minutes
or
Dell U2715H
No mDP Cable
The dispaly will go into Power Save Mode in 5 minutes
or
Dell U2715H
?
No DP Cable
The dispaly will go into Power Save Mode in 5 minutes
Operating the Monitor
|
47
Setting the Maximum Resolution
To set the maximum resolution for the monitor:
In Windows® 7, Windows® 8, Windows® 8.1 and Windows® 10:
1. For Windows® 8 and Windows® 8.1 only, select the Desktop tile to switch to
classic desktop.
2. Right-click on the desktop and click Screen Resolution.
3. Click the Dropdown list of the Screen Resolution and select 2560 x 1440.
4. Click OK.
If you do not see 2560 x 1440 as an option, you may need to update your graphics
driver. Depending on your computer, complete one of the following procedures:
If you have a Dell desktop or portable computer:
∞
latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
Go to the support site for your computer and download the latest graphic
drivers.
∞
Go to your graphics card website and download the latest graphic drivers.
∞
Using the Tilt, Swivel, Vertical Extension, Rotation
and Dual Monitor Setup
NOTE: This is applicable for a monitor with a stand. When any other stand is
bought, please refer to the respective stand setup guide for set up instructions.
Tilt, Swivel
With the stand attached to the monitor, you can tilt and swivel the monitor for the
most comfortable viewing angle.
5°
21°
45°
45°
NOTE: The stand is detached when the monitor is shipped from the factory.
48
|
Operating the Monitor
Vertical Extension
NOTE: The stand extends vertically up to 115 mm. The figure below illustrates
how to extend the stand vertically.
115mm
Rotating the Monitor
Before you rotate the monitor, your monitor should be fully vertically extended (
tilted up to avoid hitting the bottom edge of the monitor.
Operating the Monitor
|
49
Rotate clockwise
0°
90°
Rotate counterclockwise
0°
90°
50
|
Operating the Monitor
Reverse (180°) mount
NOTE: To reverse (180°) mount, remove the stand and use wall mounting
solution (optional).
180°
NOTE: To use the Display Rotation function (Landscape versus Portrait view)
with your Dell computer, you require an updated graphics driver that is not
included with this monitor. To download the graphics driver, go to www.dell.
com/support and see the Download section for Video Drivers for latest driver
updates.
NOTE: When in the Portrait View Mode, you may experience performance
degradation in graphic-intensive applications (3D Gaming and etc.).
Dual-Monitor Setup
The ability to rotate 90° clockwise, 90° counterclockwise and reverse (180°) mount
enable the thinnest borders of each monitor to be placed side by side to ensure
minimum gap between display images.
The recommended dual-monitor setup:
Landscape (side by side)
Operating the Monitor
|
51
Landscape (Top-bottom)
180°
Supported by wall
mounting solution
(optional)
Portrait
90°
90°
52
|
Operating the Monitor
Adjusting the Rotation Display Settings of Your
System
After you have rotated your monitor, you need to complete the procedure below to
adjust the Rotation Display Settings of your system.
NOTE: If you are using the monitor with a non-Dell computer, you need to
go the graphics driver website or your computer manufacturer website for
information on rotating the 'contents' on your display.
To adjust the Rotation Display Settings:
1. Right-click on the desktop and click Properties.
2. Select the Settings tab and click Advanced.
3. If you have an ATI graphics card, select the Rotation tab and set the preferred
rotation.
4. If you have an nVidia graphics card, click the nVidia tab, in the left-hand column
select NVRotate, and then select the preferred rotation.
5. If you have an Intel® graphics card, select the Intel graphics tab, click Graphic
Properties, select the Rotation tab, and then set the preferred rotation.
NOTE: If you do not see the rotation option or it is not working correctly, go to
www.dell.com/support and download the latest driver for your graphics card.
Operating the Monitor
|
53
Troubleshooting
4
WARNING: Before you begin any of the procedures in this section, follow the
Self-Test
Your monitor provides a self-test feature that allows you to check whether your
monitor is functioning properly. If your monitor and computer are properly connected
but the monitor screen remains dark, run the monitor self-test by performing the
following steps:
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-
Test operation, remove all Digital and the Analog cables from the back of
computer.
3. Turn on the monitor.
The floating dialog box should appear on-screen (against a black background), if the
monitor cannot sense a video signal and is working correctly. While in self-test mode,
the power LED remains white. Also, depending upon the selected input, one of the
dialogs shown below will continuously scroll through the screen.
Dell U2715H
or
Dell U2715H
or
54
|
Troubleshooting
Dell U2715H
mDP Cable
or
Dell U2715H
DP Cable
4. This box also appears during normal system operation, if the video cable
becomes disconnected or damaged.
5. Turn Off your monitor and reconnect the video cable; then turn on both your
computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check
your video controller and computer, because your monitor is functioning properly.
Built-in Diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the screen
abnormality you are experiencing is an inherent problem with your monitor, or with
your computer and video card.
NOTE: You can run the built-in diagnostics only when the video cable is
unplugged and the monitor is in self-test mode.
1
2
3
4
5
Troubleshooting
|
55
To run the built-in diagnostics:
1. Ensure that the screen is clean (no dust particles on the surface of the screen).
2. Unplug the video cable(s) from the back of the computer or monitor. The
monitor then goes into the self-test mode.
3. Press and hold Button 1 and Button 4 on the front panel simultaneously for 2
seconds. A gray screen appears.
4. Carefully inspect the screen for abnormalities.
5. Press Button 4 on the front panel again. The color of the screen changes to red.
6. Inspect the display for any abnormalities.
7. Repeat steps 5 and 6 to inspect the display in green, blue, black, white and text
screens.
The test is complete when the text screen appears. To exit, press Button 4 again.
If you do not detect any screen abnormalities upon using the built-in diagnostic tool,
the monitor is functioning properly. Check the video card and computer.
Common Problems
The following table contains general information about common monitor problems
you might encounter and the possible solutions:
Common
What You
Possible Solutions
Symptoms
Experience
No Video/Power
LED off
No picture
Ensure that the video cable connecting the monitor
and the computer is properly connected and
secure.
∞
∞
Verify that the power outlet is functioning properly
using any other electrical equipment.
Ensure that the power button is depressed fully.
∞
∞
Ensure that the correct input source is selected via
No Video/Power
LED on
No picture or no
brightness
Increase brightness & contrast controls via OSD.
Perform monitor self-test feature check.
∞
∞
∞
Check for bent or broken pins in the video cable
connector.
Run the built-in diagnostics.
∞
∞
Ensure that the correct input source is selected via
Poor Focus
Picture is fuzzy,
blurry, or ghosting
Eliminate video extension cables.
∞
∞
Reset the monitor to Factory Settings(Factory
Reset).
Change the video resolution to the correct aspect
ratio.
∞
56
|
Troubleshooting
Shaky/Jittery
Video
Wavy picture or
fine movement
Reset the monitor to Factory Settings(Factory
Reset).
∞
Check environmental factors.
∞
∞
Relocate the monitor and test in another room.
Missing Pixels
LCD screen has
spots
Cycle power On-Off.
∞
∞
Pixel that is permanently Off is a natural defect that
can occur in LCD technology.
For more information on Dell Monitor Quality and
Pixel Policy, see Dell Support site at: http://www.
∞
Stuck-on Pixels
LCD screen has
bright spots
Cycle power On-Off.
∞
∞
Pixel that is permanently off is a natural defect that
can occur in LCD technology.
For more information on Dell Monitor Quality and
Pixel Policy, see Dell Support site at:http://www.
∞
Brightness
Problems
Picture too dim or
too bright
Reset the monitor to Factory Settings(Factory
Reset).
∞
Adjust brightness & contrast controls via OSD.
∞
∞
Geometric
Distortion
Screen not
centered correctly
Reset the monitor to Factory Settings(Factory
Reset).
Adjust horizontal & vertical controls via OSD.
∞
∞
Horizontal/
Vertical Lines
Screen has one or
more lines
Reset the monitor to Factory Settings(Factory
Reset).
Perform monitor self-test feature check and
determine if these lines are also in self-test mode.
∞
∞
Check for bent or broken pins in the video cable
connector.
Run the built-in diagnostics.
∞
∞
Synchronization
Problems
Screen is
scrambled or
appears torn
Reset the monitor to Factory Settings(Factory
Reset).
Perform monitor self-test feature check to
determine if the scrambled screen appears in self-
test mode.
∞
Check for bent or broken pins in the video cable
connector.
∞
∞
Restart the computer in the safe mode.
Safety Related
Issues
Visible signs of
smoke or sparks
Do not perform any troubleshooting steps.
Contact Dell immediately.
∞
∞
Intermittent
Problems
Monitor
malfunctions on &
off
Ensure that the video cable connecting the monitor
to the computer is connected properly and is
secure.
∞
Reset the monitor to Factory Settings(Factory
Reset).
∞
∞
Perform monitor self-test feature check to
determine if the intermittent problem occurs in self-
test mode.
Troubleshooting
|
57
Missing Color
Wrong Color
Picture missing
color
Perform monitor self-test feature check.
∞
∞
Ensure that the video cable connecting the monitor
to the computer is connected properly and is
secure.
Check for bent or broken pins in the video cable
connector.
∞
∞
Picture color not
good
Change the Color Setting Mode in the Color
Settings OSD to Graphics or Video depending on
the application.
Try different Preset Modes in Color settings OSD.
Adjust R/G/B value in Custom Color in Color
settings OSD.
∞
∞
Change the Input Color Format to RGB or YPbPr in
the Color settings OSD.
Run the built-in diagnostics.
∞
∞
Image retention
from a static
Faint shadow from
the static image
Use the Power Management feature to turn off
the monitor at all times when not in use (for more
image left on the displayed appears
monitor for a long on the screen
period of time
Alternatively, use a dynamically changing
screensaver.
∞
Wireless mouse
is not working or
lagging
Do not respond or
responds slowly
Increase the distance between the USB 3.0
peripherals and the wireless USB receiver.
∞
∞
∞
Position your wireless USB receiver as close as
possible to the wireless mouse.
Use a USB-extender cable to position the wireless
USB receiver as far away as possible from the USB
3.0 port.
Video Ghosting or Moving image
Change the Response Time in the Display OSD to
Fast or Normal depending on your application and
usage.
∞
Overshooting
appears to have
trailing shadow or
bright edge.
Product-Specific Problems
Specific
What You
Possible Solutions
Symptoms
Experience
Screen image is
too small
Image is centered
on screen, but
does not fill entire
viewing area
Check the Aspect Ratio setting in the Display
settings OSD.
∞
∞
Reset the monitor to Factory Settings(Factory
Reset) .
Cannot adjust the OSD does not
Turn Off the monitor, unplug the power cord, plug
it back, and then turn On the monitor.
∞
∞
monitor with the
buttons on the
side panel
appear on the
screen
Check whether the OSD menu is locked. If yes,
press and hold the button above the Power button
for 10 seconds to unlock (for more information, see
Lock).
58
|
Troubleshooting
No Input Signal
when user
controls are
pressed
No picture, the
LED light is white
Check the signal source. Ensure the computer is not
in the power saving mode by moving the mouse or
pressing any key on the keyboard.
∞
∞
Check whether the signal cable is plugged in
properly. Replug the signal cable if necessary.
Reset the computer or video player.
∞
∞
The picture does
not fill the entire
screen
The picture
Due to different video formats (aspect ratio) of
DVDs, the monitor may display in full screen.
cannot fill the
height or width of
the screen
Run the built-in diagnostics.
∞
Troubleshooting
|
59
Universal Serial Bus (USB) Specific Problems
Specific
What You
Possible Solutions
Symptoms
Experience
USB interface is
not working
USB peripherals
are not working
Check that your monitor is turned On.
∞
∞
∞
Reconnect the upstream cable to your computer.
Reconnect the USB peripherals (downstream
connector).
Switch Off and then turn On the monitor again.
Reboot the computer.
∞
∞
∞
Some USB devices like external portable HDD
require higher electric current; connect the device
directly to the computer system.
High Speed USB
3.0 interface is
slow
High Speed USB
3.0 peripherals
working slowly or
not working at all
Check that your computer is USB 3.0-capable.
∞
∞
Some computers have USB 3.0, USB 2.0 and USB 1.1
ports. Ensure that the correct USB port is used.
Reconnect the upstream cable to your computer.
∞
∞
Reconnect the USB peripherals (downstream
connector).
Reboot the computer.
∞
Mobile High-Definition Link (MHL) Specific Problems
Specific
What You
Possible Solutions
Symptoms
Experience
MHL interface is
not working
Cannot see MHL
device image
Ensure your MHL cable and MHL device are MHL
certified.
∞
shown on monitor
Check your MHL device is turned On.
∞
∞
∞
Check your MHL device is not in Standby mode.
Check physical MHL cable connection is
corresponding to input source selected on OSD
Menu i.e., HDMI (MHL) 1 or HDMI (MHL) 2.
Wait for 30 seconds after connecting MHL cable as
some MHL devices require longer recovery time.
∞
60
|
Troubleshooting
Appendix
5
WARNING: Safety Instructions
WARNING: Use of controls, adjustments, or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.
For information on safety instructions, see the Product Information Guide.
FCC Notices (U.S. Only) and Other Regulatory
Information
For FCC notices and other regulatory information, see the regulatory compliance
Contact Dell
For customers in the United States, call 800-WWW-DELL (800-999-3355).
NOTE: If you do not have an active Internet connection, you can find contact
information on your purchase invoice, packing slip, bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options.
Availability varies by country and product, and some services may not be available
in your area.
To get online Monitor support content:
To contact Dell for sales, technical support, or customer service issues:
2. Verify your country or region in the Choose A Country/Region drop-down
menu at the bottom of the page.
3. Click Contact Us on the left side of the page.
4. Select the appropriate service or support link based on your need.
5. Choose the method of contacting Dell that is convenient for you.
Appendix
|
61
Setting Up Your Monitor
Setting the display resolution
For maximum display performance with Microsoft® Windows® operating systems, set
the display resolution to 2560 x 1440 pixels by performing the following steps:
In Windows® 7, Windows® 8, Windows® 8.1 and Windows® 10:
1. For Windows® 8 and Windows® 8.1 only, select the Desktop tile to switch to
classic desktop.
2. Right-click on the desktop and click Screen Resolution.
3. Click the Dropdown list of the Screen Resolution and select 2560 x 1440.
4. Click OK.
If you do not see the recommended resolution as an option, you may need to update
your graphics driver. Please choose the scenario below that best describes the
computer system you are using, and follow the given steps.
If you have a Dell™ desktop or a Dell™ portable computer
with internet access
driver for your graphics card.
2. After installing the drivers for your graphics adapter, attempt to set the resolution
to 2560 x 1440 again.
NOTE: If you are unable to set the resolution to 2560 x 1440, please contact
Dell™ to inquire about a graphics adapter that supports these resolutions.
If you have a non Dell™ desktop, portable computer, or
graphics card
In Windows® 7, Windows® 8, Windows® 8.1 and Windows® 10:
1. For Windows® 8 and Windows® 8.1 only, select the Desktop tile to switch to
classic desktop.
2. Right-click on the desktop and click Personalization.
3. Click Change Display Settings.
4. Click Advanced Settings.
5. Identify your graphics controller supplier from the description at the top of the
window (e.g. NVIDIA, ATI, Intel etc.).
6. Refer to the graphic card provider website for updated driver (for example,
62
|
Appendix
7. After installing the drivers for your graphics adapter, attempt to set the resolution
to 2560 x 1440 again.
NOTE: If you are unable to set the recommended resolution, please contact the
manufacturer of your computer or consider purchasing a graphics adapter that
will support the video resolution.
Appendix
|
63
|