D LINK DCS 7513 User Manual

Quick Installation Guide  
Full HD WDR Day & Night Outdoor Network Camera  
This document will guide you through  
the basic installation process for your new  
D-Link Network Camera.  
DCS-7513  
Documentation also available  
on CD and via the D-Link  
Website  
2. Hardware Overview  
Ethernet Jack  
RJ-45 connector for Ethernet which  
can also be used to power the camera  
using Power over Ethernet (PoE).  
Power Connector  
Connects to a 12 V DC power adapter  
(not included).  
Audio Out  
Connects to speakers.  
Audio In  
Connects to a microphone.  
DI/DO Wiring, 12 V DC output  
I/O connectors for external devices.  
24 V Power Connector  
Connects to 24 V AC power.  
Reset Button  
Press for 10 seconds to reset the camera  
back to the factory default settings.  
BNC  
Analog video output.  
3. SD Card Installation  
1
2
Disassemble the Camera  
Open the camera by  
loosening the two screws.  
3
4
Install the SD Card  
Push the SD card into the card  
slot with the gold contacts  
directed towards the base of  
the camera. To eject the SD  
card, push the SD card into the  
slot and release. The SD card  
will spring out.  
D-Link DCS-7513 Quick Install Guide  
3
4. Mounting Instructions  
Mounting Installation  
Refer to the User Manual for detailed instructions regarding the installation and mounting of  
the camera using a mounting bracket.  
Figure 2.1  
Figure 2.2  
Figure 2.3  
Figure 2.4  
4
D-Link DCS-7513 Quick Install Guide  
Connection with a PoE Switch  
If you are using a PoE switch, connect the camera to the switch using an Ethernet cable, which  
will provide transmission of both power and data over a single cable.  
General Connection Using a 12 V DC Power Adapter  
1. Connect the network camera to your network using an Ethernet cable.  
2. Connect a compatible 12 V power adapter (not included) from the camera to a power outlet.  
General Connection Using 24 V AC Power Wiring  
1. Connect the network camera to your network using an Ethernet cable.  
2. Connect the supplied power cable from the camera to a power source such as your  
building's emergency power.  
D-Link DCS-7513 Quick Install Guide  
5
5. Configuration (Setup Wizard)  
InserttheDCS-7513CDintoyourcomputer'sCD-ROMdrivetobegintheinstallation. IftheAutorun  
function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click  
the Start button and in the box type D:\autorun.exe, where D: represents the drive letter of your  
CD-ROM drive.  
Click Setup Wizard to begin the installation.  
After clicking Setup Wizard, the following window will open.  
Click Next to continue.  
Click Yes to accept the License Agreement.  
To start the installation process, click Next.  
Note: The installation may take several minutes to finish.  
Click Finish to complete the installation.  
6
D-Link DCS-7513 Quick Install Guide  
Click on the D-Link Setup Wizard SE icon that was created  
in your Windows Start menu.  
Start > D-Link > Setup Wizard SE  
The Setup Wizard will appear and display the MAC address  
and IP address of your camera(s). If you have a DHCP server  
on your network, a valid IP Address will be displayed. If your  
network does not use a DHCP server, the network camera's  
default static IP 192.168.0.20 will be displayed.  
Click the Wizard button to continue.  
Enter the Admin ID and password. When logging in for the  
first time, the default Admin ID is admin with the password  
left blank.  
Click Next to continue.  
Select DHCP if your camera automatically obtains an IP  
address from a DHCP server such as a router. Select Static  
IP if you want to manually enter the IP settings for the  
camera.  
Click Next to continue.  
Take a moment to confirm your settings and click Restart.  
D-Link DCS-7513 Quick Install Guide  
7
Viewing Camera via Web Browser  
Click on the D-Link Setup Wizard SE icon that was  
created in your Windows Start menu.  
Start > D-Link > Setup Wizard SE  
Select the camera and click the Link button to access the  
web configuration.  
The Setup Wizard will automatically open your web browser  
to the IP address of the camera.  
Select admin as the username and leave the password  
blank. Click OK to continue.  
This section shows your camera’s live video. You can select  
your video profile and view or operate the camera. For  
additional information about web configuration, please  
refer to the user manual included on the CD-ROM or the  
D-Link website.  
8
D-Link DCS-7513 Quick Install Guide  
Notes  
D-Link DCS-7513 Quick Install Guide  
9
Notes  
10  
D-Link DCS-7513 Quick Install Guide  
Notes  
D-Link DCS-7513 Quick Install Guide  
11  
Technical Support  
D-Link’s website contains the latest user documentation and software updates for  
D-Link products.  
U.S. and Canadian customers can contact D-Link Technical Support through our  
website or by phone.  
United States  
Telephone  
(877) 354-6555  
World Wide Web  
Canada  
Telephone  
(800) 361-5265  
World Wide Web  
Version 1.20_130x183  
February 25, 2016  
RMN0100746A  
Copyright ©2016 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, and the D-Link logo are registered trademarks  
of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their  
respective owners. Product specifications, size and shape are subject to change without notice, and actual product appearance  
12  
D-Link DCS-7513 Quick Install Guide  

Samsung Aw1809b User Manual
Pinnacle Products International Protemp Bcb 42 Bdf User Manual
Mitsubishi Electronics Mitsubishi Digital Electronics Air Conditioner Pca A24ga User Manual
MIELE K 1911 VI User Manual
LG G3 BEAT LG D722K User Manual
Lexmark All In One Printer Xm1100 Series User Manual
John Deere D105 Lawn Mower User Manual
HP 8730 User Manual
CRAFTSMAN 536.881951 User Manual
BLACK DECKER FEJ520JF User Manual