D LINK DCS 2310L User Manual

Before You Begin  
You must have an active mydlink.com account to use this camera. If you do not  
have an account, follow the steps under Easy Setup (all other routers) and the  
setup wizard will allow you to create a new account. Visit www.mydlink.com for  
more information.  
Quick Install Guide  
Easy Setup (all other routers)  
Step 1:  
Open a web browser and go to http://www.mydlink.com/download. Click your  
camera model and then underWizard, click the link of the version (Windows or Mac)  
youwanttodownload.Dependingonyourwebbrowser,youmayneedtoright-click  
the link and select Save link as. Once downloaded, do not launch the wizard until  
instructed.  
mydlink Portal  
Cloud Camera 2300  
After registering your DCS-2310L camera with mydlink, you will be able to remotely  
access your camera from the www.mydlink.com website. After signing in to your  
mydlink account, you will see a screen similar to the following:  
If you have purchased an open box or resold unit, or if you experience issues  
registering this camera with your mydlink account, perform a hard reset by  
using an unfolded paperclip to press and hold the reset button on the back of  
the camera for 6 seconds while the camera is powered on. If you are returning  
the product to the place of purchase, please perform the hard reset procedure  
to clear the product of any personal data.  
Step 1:  
OpenInternetExplorerandgotohttp://www.mydlink.com,thensignintomydlink.  
Step 2:  
Step 2:  
Connect the included Ethernet cable to the Ethernet port located on the back of  
the DCS-2310L and attach it to your router.  
Select your camera from the device list, and your camera’s Live View will appear.  
Thank you for purchasing the DCS-2310L Cloud Camera 2300. Follow the easy  
steps in this guide to properly set up your camera. Please verify that all the package  
contents below are available.  
Step 3:  
Installation  
Attach the power supply to the power input located on the back of the DCS-2310L  
and connect it to a wall outlet or power strip. Power is confirmed when the Power  
LED is lit.  
Zero Configuration Setup (with mydlink Cloud Router only)  
Note: The Zero Configuration Setup will only work with a registered Cloud Router  
and an active mydlink account. If you do not have a mydlink Cloud Router, please  
skip to the Easy Setup section.  
Package Contents  
Step 4:  
Windows Users - Once the file is downloaded from Step 1, you will have to extract  
(unzip) the files. Right-click the file and select to extract the files. Once extracted,  
double-click autorun.exe to launch the setup wizard.  
DCS-2310L Cloud Camera 2300  
Step 1:  
Connect the included Ethernet cable to the Ethernet port located on the back of  
the DCS-2310L and connect it to your router.  
Mac Users - Once downloaded, double-click the file to launch the setup wizard.  
CAT5 Ethernet Cable  
Step 5:  
Step 2:  
Click on the Start button to start the wizard and follow the instructions from the  
Installation Wizard to finish setting up your camera.  
Attach the power supply to the power input located on the back of the DCS-2310L  
and connect it to a wall outlet or power strip. Power is confirmed when the Power  
LED is lit. Your Cloud Router will automatically assign your network settings to your  
camera.  
Power Adapter  
Technical Support  
Having trouble installing your new product? D-Link’s website contains the latest  
user documentation and software updates for D-Link products. U.S. and Canadian  
customers can contact D-LinkTechnical Support through our website or by phone.  
If any of the above items are missing, please contact your reseller.  
Step 3:  
From any computer, open a web browser, go to http://www.mydlink.com and log  
into your account. Once mydlink detects your camera, a notice will appear that there  
is a new device detected. Click on your camera from the New Devices list and then  
click Yes to add your camera.  
United States  
Telephone: (877) 453-5465  
Canada  
Telephone: (800) 361-5265  
System Requirements  
• Computer with Microsoft Windows® 7, Vista®, or XP, Mac OS® X (10.5 or above)  
• PC with 1.3GHz or above; at least 128MB RAM  
• Internet Explorer 7 or above, Firefox 3.5 or above, Safari 4 or above, Chrome 8  
or above  
• Existing 10/100 Ethernet-based network  
• A broadband Internet connection  
Your setup is complete!  
Copyright ©2012 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries.  
Other trademarks are the property of their respective owners. Network conditions and environmental factors, including volume of  
network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Product specifications,  
size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging.  
Visit dlink.com (US) or dlink.ca (Canada) for more details.  
Step 6:  
You can now unplug your camera and move it to the location of your choice. You  
may connect the camera to a Power over Ethernet (PoE) switch to eliminate using  
the power supply.  
Once the installation is finished, you can unplug your camera and move it to the  
location of your choice.You may connect the camera to a Power over Ethernet (PoE)  
switch to eliminate using the power supply.  
Version 1.0(US) | May 30, 2012  
DCS-2310L  

Trion Mv9 User Manual
Toshiba Multifunctional Digital Systems 282 User Manual
Scotsman Ice Air And Water Cooled C1848 User Manual
Panasonic Kx Fg2451 User Manual
Master Lock B150cea User Manual
LG 24MT45A User Manual
DELL ULTRASHARP U2518DX User Manual
BLACK DECKER JS670V User Manual
ASUS Y482C User Manual
ACER AW318 User Manual