CYP PUV 1510RX User Manual

PUV-1510RX  
HDBaseT™ 5Play™ Receiver  
(inc. PoH & single LAN, up to 100m)  
OPERATION MANUAL  
DISCLAIMERS  
The information in this manual has been carefully checked and is  
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any  
infringements of patents or other rights of third parties which may result  
from its use.  
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be  
contained in this document. CYP (UK) Ltd also makes no commitment to  
update or to keep current the information contained in this document.  
CYP (UK) Ltd reserves the right to make improvements to this document  
and/or product at any time and without notice.  
COPYRIGHT NOTICE  
No part of this document may be reproduced, transmitted, transcribed,  
stored in a retrieval system, or any of its part translated into any language  
or computer file, in any form or by any means—electronic, mechanical,  
magnetic, optical, chemical, manual, or otherwise—without express  
written permission and consent from CYP (UK) Ltd.  
© Copyright 2019 by CYP (UK) Ltd.  
All Rights Reserved.  
Version 1.1  
TRADEMARK ACKNOWLEDGMENTS  
All products or service names mentioned in this document may be  
trademarks of the companies with which they are associated.  
3
SAFETY PRECAUTIONS  
Please read all instructions before attempting to unpack, install or operate  
this equipment and before connecting the power supply.  
Please keep the following in mind as you unpack and install this  
equipment:  
Always follow basic safety precautions to reduce the risk of fire,  
electrical shock and injury to persons.  
To prevent fire or shock hazard, do not expose the unit to rain,  
moisture or install this product near water.  
Never spill liquid of any kind on or into this product.  
Never push an object of any kind into this product through any  
openings or empty slots in the unit, as you may damage parts inside  
the unit.  
Do not attach the power supply cabling to building surfaces.  
Use only the supplied power supply unit (PSU). Do not use the PSU if  
it is damaged.  
Do not allow anything to rest on the power cabling or allow any  
weight to be placed upon it or any person walk on it.  
To protect the unit from overheating, do not block any vents or  
openings in the unit housing that provide ventilation and allow for  
sufficient space for air to circulate around the unit.  
REVISION HISTORY  
VERSION NO. DATE  
SUMMARY OF CHANGE  
v1.00  
16/05/2019  
First release  
4
CONTENTS  
1. Introduction...........................................6  
2. Applications ...........................................6  
3. Package Contents ..................................6  
4. System Requirements ...........................6  
5. Features..................................................7  
6. Operation Controls and Functions.......8  
6.1 Front Panel................................................... 8  
6.2 Rear Panel..................................................... 9  
6.3. IR Cable Pin Assignment ......................10  
6.4. D-Sub 9 Pin Definitions ........................10  
7. Connection Diagram .......................... 11  
8. Specifications...................................... 12  
8.1 CAT5e/6/7 Cable Specification ...........13  
8.2 Timing Support Chart ............................14  
9. Acronyms............................................. 15  
5
1. INTRODUCTION  
The HDMI over single CAT5e/6/7 Receiver can receive uncompressed  
audio/video and IP data over a single run of CAT5e/6/7 cable at a distance  
up to 100 meter. It has the added benefit of control through the built-in  
RS-232 and IR ports and a bi-directional LAN serving connection. The  
Receiver (PD) can be powered by the PoE 48V function of the Transmitter  
(PSE), allowing for greater flexibility in installations.  
2. APPLICATIONS  
48V PoE from Transmitter (PSE) to Receiver (PD)  
Household entertainment sharing and control  
Lecture room display and control  
Showroom display and control  
Meeting room presentation and control  
Classroom display and control  
3. PACKAGE CONTENTS  
1 x CAT5e/6/7 over HDMI Receiver  
1 x IR Extender  
4. SYSTEM REQUIREMENTS  
Input source equipment such as PS3/Blu-ray player and output HD TV/  
display.  
6
5. FEATURES  
HDMI with 3D, 4K2K support, HDMI & DVI Compliant  
Supports CEC bypass  
Simultaneous reception of uncompressed data over a single  
100m/328ft CAT5e/6/7 cable  
5Play™ convergence: HDMI, LAN, PoE & Control (IR & RS-2232)  
Supports resolution up to 4K2K@50/60 & YUV_420 and 21:9  
Supports standard 48V from Transmitter (PSE) to Receiver (PD)  
Installation Friendly  
Supports HDMI Output cable distance up to 5m at 4K2K@50/60 &  
YUV_420  
Note:  
Displaying HDMI 3D and 4K2K contents, equivalent source signal and HDMI  
cable are required in order to secure the quality.  
7
6. OPERATION CONTROLS AND FUNCTIONS  
6.1 Front Panel  
IR2  
BLASTER  
HDMI OUT  
IR1  
IN  
EXTENDER  
CAT5e/6/7  
1
2
3
4
1
2
IR2 BLASTER: Connect to the supplied IR Blaster cable for IR signal  
transmission. Place the IR Blaster in direct line-of-sight of the  
equipment to be controlled.  
IR1 EXTENDER: Connect to the supplied IR Extender cables for IR  
signal reception. Ensure that remote being used is within the direct  
line-of-sight of the IR Extender.  
3
4
CAT5e/6/7: Connect to the Transmitter unit with a single CAT5e/6/7  
cable for transmission of all data signals.  
HDMI OUT: Connect to a HDMI equipped TV/monitor for display of  
the HDMI input source signal.  
8
6.2 Rear Panel  
RS-232 OUT  
POWER  
STD UPDATE  
LAN  
LINK  
5
6
7
8
9
1
2
STD/UPDATE Switch: This switch is reserved for factory use only.  
RS-232 OUT: Connect to the device that is to be controlled (via D-Sub  
9-pin female cable) by RS-232 commands.  
3
4
5
LAN: Connect to a PC or Laptop to utilise the Internet or network  
function.  
POWER LED: This LED will illuminate when the device is connected to  
a power supply.  
LINK LED: This LED will illuminate when both the input source and  
output display signals are connected through CAT cable. When it  
blinks regularly it states the display is NOT sending signals to Receiver  
but the Transmitter and Receiver are linked and if it blinks irregularly it  
indicates an error has occurred.  
9
6.3. IR Cable Pin Assignment  
IR Extender  
1
2
3
IR Signal  
Power  
Ground  
6.4. D-Sub 9 Pin Definitions  
Pin  
1
Define TX / RX  
N/C  
TxD / RxD  
RxD / TxD  
N/C  
2
3
4
5
GND  
6
N/C  
7
N/C  
8
N/C  
9
N/C  
10  
7. CONNECTION DIAGRAM  
RS-232 Equipped  
PC or Notebook  
Internet Modem  
or Router  
CAT5e/6  
1.5m  
60°  
DVD or Blu-ray Player  
RS-232  
IR Blaster  
Power  
Supply  
POWER  
LINK  
STD UPDATE  
LAN  
7m  
TX  
HDMI  
3m  
3m  
60°  
IR1  
BLASTER  
HDMI IN  
IR2  
DC 48V  
EXTEDER CATUT  
IR Extender  
IR Extender  
IR2  
60°  
3m  
BLASTER  
IR1  
EXTENDER  
CAT5e/6/7 IN  
3m  
RX  
TV or Monitor  
IR Blaster  
7m  
RS-232 OUT  
POWER  
LINK  
STD UPDATE  
60°  
1.5m  
HDMI  
RS-232  
Notebook  
CAT5e/6  
RS-232 Equipped  
HDMI Switcher  
11  
8. SPECIFICATIONS  
Video Bandwidth  
Inputs  
340MHz / 10.2Gbps  
1 x CAT5e/6/7, 1 x IR Extender  
Outputs  
1 x HDMI, 1 x RS-232, 1 X IR Blaster, 1 x LAN  
HD: 480i~4K2K@24/25/30/50/60 & YUV_420  
HDMI Resolution  
PC: VGA ~ WUXGA (RB)  
HDMI Cable Distance  
Out: 10m/1080p@8-bit, 5m/1080p@12-bit and  
5m@4K2K  
CAT5e/6/7 I/O Cable  
Distance  
Up to 100m  
IR Frequency  
30~50kHz  
ESD Protection  
Human Body Model:  
8kV (air-gap discharge)  
4kV (contact discharge)  
Power Supply  
Dimensions  
48 V/0.83 A DC (US/EU Standards, CE/FCC/UL  
certified)  
108mm (W) x 108mm (D) x 25mm (H)  
108mm (W) x 116mm (D) x 29mm (H)  
366g  
Weight  
Chassis Material  
Silkscreen Colour  
Power Consumption  
Operating Temperature  
Storage Temperature  
Relative Humidity  
Metal  
Black  
13.5w (Include Transmitter)  
0 °C~40 °C/32 °F ~104 °F  
−20 °C~60 °C/−4 °F~140 °F  
20~90% RH (non-condensing)  
12  
8.1 CAT5e/6/7 Cable Specification  
Cable  
Range  
Pixel clock Video Data  
rate Rate  
Supported  
Video  
Type  
CAT5e/6/7  
100 m  
<=225 MHz <=5.3 Gbps  
Up to 1080p, 60  
Hz, 36 bits, 3D  
(data rates lower  
than 5.3 Gbps or  
below 225 MHz  
TMDS clock).  
(HD Video)  
70 m/CAT5e/6 >225 MHz  
100 m/CAT7  
> 5.3 Gbps  
(Ultra HD  
Video)  
4K2K, 30Hz  
video formats  
13  
8.2 Timing Support Chart  
INPUT  
OUTPUT  
640x480@60/72/75/85  
800x600@56/60/72/75/85  
1024x768@60/70/75/85  
1280x720@60  
1280x1024@60  
1600x1200@60  
1920x1200@60RB  
3840x2160p@24/25/30  
4096x2160p@24  
4096x2160p@50/60(YUV_420)  
480I/576I  
480P/576P  
720P@50/60  
1080I@50/60  
1080P@50/60  
1080P@24/25/30  
14  
9. ACRONYMS  
ACRONYM  
CAT5e  
CAT6  
CAT7  
CEC  
COMPLETE TERM  
Category 5 Cable  
Category 6 Cable  
Category 7 Cable  
Consumer Electronics Control  
Digital Visual Interface  
High-bandwidth Digital Content Protection  
High Definition Multimedia Interface  
Infrared  
DVI  
HDCP  
HDMI  
IR  
PD  
Powered Device  
PSE  
Power Sourcing Equipment  
15  
CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,  
Middlesex, TW17 8BA  
Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279  
v1.00  

Universal Electronics Mary Battery User Manual
Sharp Af S100ex User Manual
Savin 9027l User Manual
MIELE G 658 SCVI User Manual
LG LRMVC2306 02 User Manual
LG F4V909WTSA User Manual
DELL S2319H User Manual
DELL S2318HN User Manual
DATAVIDEO PTR 10T MARK II User Manual
DA LITE 10M User Manual