Before Use
Basic Guide
Advanced Guide
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
Other Shooting Modes
P Mode
Camera User Guide
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Make sure you read this guide, including the “Safety Precautions”
● Click the buttons in the lower right to access other pages.
: Next page
=
(
11) section, before using the camera.
● Reading this guide will help you learn to use the camera properly.
: Previous page
● Store this guide safely so that you can use it in the future.
: Page before you clicked a link
● To jump to the beginning of a chapter, click the chapter title at right.
Index
© CANON INC. 2016
CT0-D068-000-F101-A
1
Before Use
Preliminary Notes and Legal
Information
Conventions in This Guide
Basic Guide
Advanced Guide
● In this guide, icons are used to represent the corresponding camera
buttons on which they appear, or which they resemble.
● Take and review some test shots initially to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries
and affiliates, and its distributors are not liable for any consequential
damages arising from any malfunction of a camera or accessory,
including memory cards, that result in the failure of an image to be
recorded or to be recorded in a way that is machine readable.
● The following camera buttons and controls are represented by icons.
Also, the numbers in parenthesis indicates the numbers of the buttons
Camera Basics
1
2
3
4
5
6
7
8
9
=
and controls on “Part Names” ( 4).
Auto Mode
[
[
[
[
] Up button (9) on back
] Left button (13) on back
] Right button (11) on back
] Down button (12) on back
Other Shooting Modes
P Mode
● Images recorded by the camera shall be for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note
that even for personal use, photography may contravene copyright
or other legal rights at some performances or exhibitions, or in some
commercial settings.
● Shooting modes and on-screen icons and text are indicated in
brackets.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
●
●
: Important information you should know.
: Notes and tips for expert camera use.
● The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
=
xx: Pages with related information (in this example, “xx” represents
a page number).
● Although the screen is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet
design specifications, in rare cases some pixels may be defective or
may appear as red or black dots. This does not indicate damage. This
does not affect recorded images either.
● The symbols “ Still Images” and “ Movies” below titles indicate
how the function is used—whether for still images or movies.
● Instructions in this guide apply to the camera under default settings.
● For convenience, all supported memory cards are simply referred to as
the “memory card”.
● When the camera is used over an extended period, it may become
warm. This does not indicate damage.
Index
3
Before Use
Part Names
Basic Guide
Advanced Guide
( )( ) ( ) ( )
( )
5
1
2
3
4
( ) ( )
( )
3
( )
5
( )
6
1
2
Camera Basics
1
2
3
4
5
6
7
8
9
( )
7
Auto Mode
( )
3
( )
8
Other Shooting Modes
P Mode
( )
9
( )
8
( ) ( )
9 10
( )
6
(
10
)
(
11
)
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
(
12
)
( )
4
(
13
)
(
14
)
(
15
)
( )
7
(1) Zoom lever
(5) Flash
(6) Lamp
(7) Lens
(1) Speaker
(9)
[
[
(Exposure compensation)] /
(Single-image erase)] / Up
Shoot Only: [
[
(telephoto)] /
(wide angle)]
(2) Microphone
button
(3) AV OUT (Audio/video output) /
DIGITAL terminal
Playback:
[
[
(magnify)] /
(index)]
(10) FUNC./SET (Function/Set) button
(8) Tripod socket
(9) Memory card/battery cover
(10) ] (N-Mark)*
Index
(11)
(12)
[
[
(Flash)] / Right button
(Information)] / Down
(4) Screen (Monitor)
(5) Indicator (back)
(2) Shutter button
(3) Strap mount
(4) Power button
[
button
(6)
(7) Movie button
(8) (Auto)] button
[
(Playback)] button
(13)
(14)
(15)
[
[
[
(Macro)] / Left button
(Wi-Fi)] button
=
* Used with NFC feature ( 79).
[
(Menu)] button
4
Advanced Guide
Before Use
Table of Contents
1
Camera Basics........................................................... 22
Basic Guide
Advanced Guide
On/Off..................................................................................... 22
Power-Saving Features (Auto Power Down).............................23
Power Saving in Shooting Mode ...........................................23
Power Saving in Playback Mode...........................................23
Before Use
Initial Information.............................................................. 2
Package Contents.................................................................... 2
Compatible Memory Cards....................................................... 2
Preliminary Notes and Legal Information................................. 3
Conventions in This Guide ....................................................... 3
Part Names .............................................................................. 4
Common Camera Operations ................................................ 10
Safety Precautions..................................................................11
Camera Basics
1
2
3
4
5
6
7
8
9
Shutter Button ........................................................................ 23
Shooting Display Options....................................................... 24
Using the FUNC. Menu.......................................................... 24
Using the Menu Screen.......................................................... 25
On-Screen Keyboard.............................................................. 26
Indicator Display..................................................................... 27
Clock ...................................................................................... 27
Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Basic Guide
Basic Operations............................................................. 14
2
Auto Mode.................................................................. 28
Shooting with Camera-Determined Settings.......................... 28
Shooting (Smart Auto) ...............................................................28
Still Images/Movies ...............................................................30
Still Images............................................................................30
Movies...................................................................................31
Scene Icons...............................................................................31
Image Stabilization Icons...........................................................32
On-Screen Frames....................................................................33
Initial Preparations.................................................................. 14
Attaching Accessories ...............................................................14
Holding the Camera...................................................................15
Charging the Battery Pack.........................................................15
Inserting the Battery Pack and Your Memory Card
Index
(Commercially Available)...........................................................16
Removing the Battery Pack and Memory Card.....................16
Setting the Date and Time.........................................................17
Changing the Date and Time.................................................17
Display Language......................................................................18
Common, Convenient Features ............................................. 33
Zooming In Closer on Subjects (Digital Zoom)..........................33
Using the Self-Timer..................................................................34
Using the Self-Timer to Avoid Camera Shake.......................34
Customizing the Self-Timer ...................................................35
Adding a Date Stamp ................................................................35
Continuous Shooting .................................................................36
Trying the Camera Out........................................................... 19
Shooting (Smart Auto) ...............................................................19
Viewing......................................................................................20
Erasing Images .....................................................................21
Image Customization Features .............................................. 37
5
Before Use
Changing the Aspect Ratio........................................................37
Changing Image Resolution (Size)............................................37
Guidelines for Choosing Resolution Based on Paper
Changing the Metering Method .................................................50
Changing the ISO Speed...........................................................51
Correcting Image Brightness (i-Contrast)..................................51
Basic Guide
Advanced Guide
Size (for 4:3 Images).............................................................37
Changing Movie Image Quality .................................................38
Image Colors.......................................................................... 52
Adjusting White Balance............................................................52
Custom White Balance..........................................................52
Changing Image Color Tones (My Colors) ................................52
Custom Color.........................................................................53
Helpful Shooting Features...................................................... 38
Displaying Grid Lines.................................................................38
Magnifying the Area in Focus ....................................................39
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
Customizing Camera Operation............................................. 39
Deactivating the AF-Assist Beam ..............................................39
Deactivating the Red-Eye Reduction Lamp...............................40
Changing the Image Display Style after Shots..........................40
Changing the Image Display Period after Shots ...................40
Changing the Screen Displayed after Shots .........................41
Shooting Range and Focusing............................................... 54
Shooting Close-Ups (Macro) .....................................................54
Shooting Distant Subjects (Infinity)............................................54
Digital Tele-Converter................................................................54
Changing the AF Frame Mode ..................................................55
Center....................................................................................55
Face AiAF..............................................................................56
Choosing Subjects to Focus On (Tracking AF) .....................56
Shooting with Servo AF.........................................................57
Changing the Focus Setting ......................................................57
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
3
Other Shooting Modes.............................................. 42
Brightness / Color Customization (Live View Control)............ 42
Specific Scenes...................................................................... 43
Applying Special Effects......................................................... 44
Shooting with a Fish-Eye Lens Effect (Fish-Eye Effect)............44
Shots Resembling Miniature Models (Miniature Effect).............45
Playback Speed and Estimated Playback Time (for One-
Flash....................................................................................... 58
Changing the Flash Mode .........................................................58
Auto.......................................................................................58
On..........................................................................................58
Slow Synchro ........................................................................58
Off..........................................................................................58
Index
Minute Clips)..........................................................................45
Shooting with a Toy Camera Effect (Toy Camera Effect)...........46
Shooting in Monochrome...........................................................46
Other Settings ........................................................................ 59
Changing the Compression Ratio (Image Quality)....................59
Changing the IS Mode Settings.................................................59
Shooting Movies with Subjects at the Same Size Shown
Special Modes for Other Purposes ........................................ 47
Using the Face Self-Timer.........................................................47
Shooting Long Exposures (Long Shutter) .................................47
4
P Mode........................................................................ 49
before Shooting.....................................................................60
Shooting in Program AE ([P] Mode)....................................... 49
5
Playback Mode .......................................................... 61
Image Brightness (Exposure)................................................. 50
Adjusting Image Brightness (Exposure Compensation)............50
Viewing................................................................................... 61
6
Before Use
Switching Display Modes...........................................................63
Overexposure Warning (for Image Highlights) ......................63
Histogram..............................................................................63
GPS Information Display.......................................................63
Changing Image Color Tones (My Colors) ................................75
Correcting Image Brightness (i-Contrast)..................................75
Correcting Red-Eye...................................................................76
Basic Guide
Advanced Guide
Editing Movies........................................................................ 77
Browsing and Filtering Images............................................... 64
Navigating through Images in an Index.....................................64
Finding Images Matching Specified Conditions.........................64
6
Wi-Fi Functions.......................................................... 78
Camera Basics
1
2
3
4
5
6
7
8
9
Available Wi-Fi Features ........................................................ 78
Sending Images to a Smartphone.......................................... 79
Sending Images to an NFC-Compatible Smartphone ...............79
Connecting via NFC When Camera Is Off or in Shooting
Auto Mode
Image Viewing Options .......................................................... 65
Magnifying Images ....................................................................65
Viewing Slideshows...................................................................66
Changing Slideshow Settings................................................66
Auto Playback of Related Images (Smart Shuffle) ....................66
Other Shooting Modes
P Mode
Mode .....................................................................................79
Connecting via NFC When Camera Is in Playback Mode.....81
Adding a Smartphone................................................................82
Using Another Access Point ......................................................84
Previous Access Points .............................................................84
Protecting Images .................................................................. 67
Using the Menu .........................................................................68
Choosing Images Individually....................................................68
Selecting a Range .....................................................................68
Protecting All Images at Once ...................................................69
Clearing All Protection at Once .............................................69
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Saving Images to a Computer................................................ 85
Preparing to Register a Computer.............................................85
Installing the Software...........................................................85
Configuring the Computer for a Wi-Fi Connection
Erasing Images ...................................................................... 70
Erasing Multiple Images at Once...............................................70
Choosing a Selection Method ...............................................70
Choosing Images Individually................................................70
Selecting a Range.................................................................71
Specifying All Images at Once...............................................71
(Windows Only).....................................................................85
Saving Images to a Connected Computer.................................86
Confirming Access Point Compatibility..................................86
Using WPS-Compatible Access Points .................................87
Connecting to Listed Access Points ......................................89
Previous Access Points.........................................................90
Index
Rotating Images..................................................................... 71
Using the Menu .........................................................................71
Deactivating Auto Rotation ........................................................72
Sending Images to a Registered Web Service....................... 90
Registering Web Services .........................................................90
Registering CANON iMAGE GATEWAY................................91
Registering Other Web Services ...........................................92
Uploading Images to Web Services ..........................................93
Tagging Images as Favorites ................................................. 72
Using the Menu .........................................................................72
Editing Still Images................................................................. 73
Resizing Images........................................................................73
Cropping....................................................................................74
Printing Images Wirelessly from a Connected Printer............ 94
Sending Images to Another Camera...................................... 95
7
Before Use
Image Sending Options.......................................................... 97
Sending Multiple Images ...........................................................97
Selecting a Range.................................................................97
Sending Images Tagged as Favorites ...................................97
Notes on Sending Images .........................................................98
Choosing the Number of Recording Pixels (Image Size) ..........98
Adding Comments.....................................................................99
Using Eco Mode ......................................................................108
Power-Saving Adjustment .......................................................108
Screen Brightness ...................................................................109
Hiding the Start-Up Screen......................................................109
Formatting Memory Cards.......................................................109
Low-Level Formatting.......................................................... 110
File Numbering ........................................................................ 110
Date-Based Image Storage..................................................... 111
Metric / Non-Metric Display ..................................................... 111
Checking Certification Logos................................................... 111
Display Language.................................................................... 111
Adjusting Other Settings.......................................................... 111
Restoring Defaults................................................................... 112
Basic Guide
Advanced Guide
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
Sending Images Automatically (Image Sync)......................... 99
Initial Preparations.....................................................................99
Preparing the Camera...........................................................99
Preparing the Computer......................................................100
Sending Images.......................................................................100
Viewing Images Sent via Image Sync on Your
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Smartphone.........................................................................101
8
Accessories ............................................................. 113
Using a Smartphone to View Camera Images and Control
the Camera........................................................................... 102
Geotagging Images on the Camera ........................................102
Shooting Remotely ..................................................................102
System Map ..........................................................................113
Optional Accessories.............................................................114
Power Supplies........................................................................ 114
Flash Unit ................................................................................ 115
Other Accessories ................................................................... 115
Printer...................................................................................... 115
Photo Storage.......................................................................... 115
Editing or Erasing Wi-Fi Settings.......................................... 103
Editing Connection Information ...............................................103
Changing a Device Nickname.............................................104
Erasing Connection Information..........................................104
Changing the Camera Nickname ............................................104
Returning the Wi-Fi Settings to Default ...................................105
Index
Using Optional Accessories...................................................116
Playback on a TV .................................................................... 116
Using the Software................................................................117
Connect to a Computer Using a Cable.................................... 117
Checking Your Computer Environment ............................... 117
Installing the Software......................................................... 117
Saving Images to a Computer................................................. 117
7
Setting Menu............................................................ 106
Adjusting Basic Camera Functions ...................................... 106
Silencing Camera Operations..................................................106
Adjusting the Volume...............................................................106
Hiding Hints and Tips...............................................................107
Date and Time .........................................................................107
World Clock .............................................................................107
Lens Retraction Timing............................................................108
Printing Images .....................................................................119
Easy Print ................................................................................ 119
Configuring Print Settings........................................................120
8
Before Use
Cropping Images before Printing.........................................120
Choosing Paper Size and Layout before Printing ...............121
Available Layout Options.....................................................121
Printing ID Photos ...............................................................121
Printing Movie Scenes.............................................................122
Movie Printing Options ........................................................122
Adding Images to the Print List (DPOF) ..................................123
Configuring Print Settings....................................................123
Setting Up Printing for Individual Images ...........................123
Setting Up Printing for a Range of Images..........................124
Setting Up Printing for All Images........................................124
Clearing All Images from the Print List ................................124
Printing Images Added to the Print List (DPOF)..................124
Adding Images to a Photobook ...............................................125
Choosing a Selection Method .............................................125
Adding Images Individually..................................................125
Adding All Images to a Photobook ......................................125
Removing All Images from a Photobook .............................125
Print Tab ..................................................................................140
Playback Mode FUNC. Menu..................................................140
Basic Guide
Advanced Guide
Handling Precautions........................................................... 140
Specifications....................................................................... 141
Camera....................................................................................141
Number of Shots/Recording Time, Playback Time..............142
Shooting Range...................................................................142
Number of Shots per Memory Card ....................................143
Recording Time per Memory Card ......................................143
Battery Pack NB-11LH.........................................................144
Battery Charger CB-2LF/CB-2LFE......................................144
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
Other Shooting Modes
P Mode
Index..................................................................................... 145
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Wi-Fi (Wireless LAN) Precautions........................................ 147
Radio Wave Interference Precautions.....................................147
Security Precautions................................................................147
Trademarks and Licensing ..................................................148
Disclaimer............................................................................149
9
Appendix.................................................................. 126
Troubleshooting.................................................................... 126
On-Screen Messages........................................................... 130
Index
On-Screen Information......................................................... 132
Shooting (Information Display) ................................................132
Battery Level .......................................................................132
Playback (Detailed Information Display)..................................133
Summary of Movie Control Panel........................................133
Functions and Menu Tables ................................................. 134
Functions Available in Each Shooting Mode ...........................134
FUNC. Menu............................................................................135
Shooting Tab............................................................................137
Set Up Tab...............................................................................139
Playback Tab ...........................................................................139
9
● While adjusting image settings (Live View Control)
Before Use
Common Camera Operations
=
-
42
Basic Guide
Advanced Guide
● Focus on faces
=
=
=
56
-
28,
43,
Shoot
● Without using the flash (Flash Off)
=
-
28
● Use camera-determined settings (Auto Mode)
Camera Basics
1
2
3
4
5
6
7
8
9
● Include yourself in the shot (Self-Timer)
=
-
28
=
=
47
-
34,
Auto Mode
Shooting people well
● Add a date stamp
=
-
35
View
● View images (Playback Mode)
Other Shooting Modes
P Mode
Portraits
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
(
43)
=
-
61
● Automatic playback (Slideshow)
Matching specific scenes
=
-
66
● On a TV
=
-
116
● On a computer
Fireworks
Low Light
=
=
(
-
117
43)
=
(
43)
● Browse through images quickly
=
-
64
Index
Applying special effects
● Erase images
=
-
70
Vivid Colors
Poster Effect
Fish-Eye Effect
=
(
=
(
=
( 44)
44)
44)
Miniature Effect
Toy Camera Effect
Monochrome
=
(
=
(
=
( 46)
45)
46)
10
Before Use
Shoot/View Movies
● Shoot movies
Safety Precautions
Basic Guide
Advanced Guide
=
-
28
● Before using the product, ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
● View movies (Playback Mode)
=
● The safety precautions noted here are intended to prevent you and
other persons from being injured or incurring property damage.
-
61
Camera Basics
1
2
3
4
5
6
7
8
9
● Be sure to also check the guides included with any separately sold
accessories you use.
Print
● Print pictures
Auto Mode
Other Shooting Modes
P Mode
=
-
119
Save
● Save images to a computer
Denotes the possibility of serious injury or death.
Warning
● Do not trigger the flash in close proximity to people’s eyes.
This could damage your eyesight. In particular, remain at least 1 meter
(3.3 feet) away from infants when using the flash.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
-
117
Use Wi-Fi Functions
● Send images to a smartphone
● Store this equipment out of the reach of children and infants.
A strap wound around a child’s neck may result in asphyxiation.
If your product uses a power cord, mistakenly winding the cord around a
child’s neck may result in asphyxiation.
=
-
79
● Use only recommended power sources.
● Share images online
● Do not disassemble, alter, or apply heat to the product.
● Do not peel off the adhesive covering, if the battery pack has it.
● Avoid dropping or subjecting the product to severe impacts.
=
-
90
● Send images to a computer
Index
=
-
85
● Do not touch the interior of the product if it is broken, such as when
dropped.
● Stop using the product immediately if it emits smoke or a strange
smell, or otherwise behaves abnormally.
● Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
11
● Avoid contact with liquid, and do not allow liquid or foreign objects
inside.
This could result in electrical shock or fire.
If the product gets wet, or if liquid or foreign objects get inside, remove the
battery pack/batteries or unplug immediately.
● Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the product in places where use of electronic devices
is restricted, such as inside airplanes and medical facilities.
Before Use
Basic Guide
Advanced Guide
● Do not look through the viewfinder or the lens (if your model has a
viewfinder or interchangeable lens) at intense light sources such as
the sun on a clear day or an intense artificial light source.
This could damage your eyesight.
● Do not allow the camera to maintain contact with skin for extended
periods.
Even if the camera does not feel hot, this may cause low-temperature
burns, manifested in redness of the skin or blistering. Use a tripod in hot
places, or if you have poor circulation or insensitive skin.
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
● When using products with interchangeable lenses, do not leave the
camera with a lens attached or a lens itself out in direct sunlight
without the lens cap on.
Other Shooting Modes
P Mode
Denotes the possibility of injury.
Caution
This may cause a fire to start.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● When carrying the product by the strap, be careful not to bang it,
subject it to strong impacts or shocks, or let it get caught on other
objects.
● Do not touch the product during thunderstorms if it is plugged in.
This could result in electrical shock or fire. Immediately stop using the
product and distance yourself from it.
● Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
● Use only the recommended battery pack/batteries.
● Do not place the battery pack/batteries near or in direct flame.
This may cause the battery pack/batteries to explode or leak, resulting in
electrical shock, fire, or injuries. If leaking battery electrolyte comes into
contact with eyes, mouth, skin, or clothing, immediately flush with water.
● Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
● When using the flash, be careful not to cover it with your fingers or
clothing.
This could result in burns or damage to the flash.
● If the product uses a battery charger, note the following precautions.
Index
- Remove the plug periodically and, using a dry cloth, wipe away any
dust and dirt that has collected on the plug, the exterior of the power
outlet, and the surrounding area.
● Avoid using, placing, or storing the product in the following places:
- Places subject to direct sunlight
- Do not insert or remove the plug with wet hands.
- Places subject to temperatures above 40 °C (104 °F)
- Do not use the equipment in a manner that exceeds the rated
capacity of the electrical outlet or wiring accessories. Do not use if
the plug is damaged or not fully inserted in the outlet.
- Humid or dusty places
These could cause leakage, overheating, or an explosion of the battery
pack/batteries, resulting in electrical shock, fire, burns, or other injuries.
Overheating and damage may result in electrical shock, fire, burns, or
other injuries.
- Do not allow dust or metal objects (such as pins or keys) to contact
the terminals or plug.
- Do not cut, damage, alter, or place heavy items on the power cord, if
your product uses one.
This could result in electrical shock or fire.
12
● The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
● Unplug any battery charger used with the product when not in use. Do
not cover with a cloth or other objects when in use.
Before Use
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in fire.
● When using optional lenses, lens filters, or filter adapters (if
applicable), be sure to attach these accessories firmly.
If the lens accessory becomes loose and falls off, it may crack, and the
shards of glass may lead to cuts.
Basic Guide
Advanced Guide
● Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or
explosion, resulting in product damage or fire.
Camera Basics
1
2
3
4
5
6
7
8
9
● On products that raise and lower the flash automatically, make sure to
avoid pinching your fingers with the lowering flash.
This could result in injury.
● If your product uses multiple batteries, do not use batteries that
have different levels of charge together, and do not use old and
new batteries together. Do not insert the batteries with the + and –
terminals reversed.
Auto Mode
Other Shooting Modes
P Mode
Denotes the possibility of property damage.
Caution
This may cause the product to malfunction.
● Do not aim the camera at intense light sources, such as the sun on a
clear day or an intense artificial light source.
Doing so may damage the image sensor or other internal components.
● Do not sit down with the camera in your pant pocket.
Doing so may cause malfunctions or damage the screen.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● When putting the camera in your bag, ensure that hard objects do not
come into contact with the screen. Also close the screen (so that it
faces the body), if your product’s screen closes.
● When using the camera on a sandy beach or at a windy location, be
careful not to allow dust or sand to enter the camera.
● On products that raise and lower the flash automatically, do not push
the flash down or pry it open.
This may cause the product to malfunction.
● Do not attach any hard objects to the product.
Doing so may cause malfunctions or damage the screen.
● Wipe off any dust, grime, or other foreign matter on the flash with a
cotton swab or cloth.
The heat emitted from the flash may cause foreign matter to smoke or the
product to malfunction.
Index
● Remove and store the battery pack/batteries when you are not using
the product.
Any battery leakage that occurs may cause product damage.
● Before you discard the battery pack/batteries, cover the terminals with
tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
13
Before Use
Initial Preparations
Basic Guide
Advanced Guide
Basic Guide
Prepare for shooting as follows.
Attaching Accessories
Camera Basics
1
2
3
4
5
6
7
8
9
Basic Operations
Basic information and instructions, from initial preparations to shooting
and playback
Auto Mode
Attach the strap.
1
( )
2
● Thread the end of the strap through the
Other Shooting Modes
P Mode
strap mount (1), and then pull the other
end of the strap through the loop on the
threaded end (2).
( )
1
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Attach the lens cap.
2
● Remove the lens cap from the lens
momentarily, thread the end of the cord
through the strap mount (1), and then pull
the lens cap through the loop (2).
● Always remove the lens cap before
turning the camera on.
● Keep the lens cap on the lens when the
camera is not in use.
Index
( )
1
( )
2
14
Remove the battery pack.
3
Before Use
( )
1
Holding the Camera
● After unplugging the battery charger,
remove the battery pack by pushing it in
(1) and up (2).
Basic Guide
Advanced Guide
( )
2
● Place the strap around your wrist.
● When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.
Camera Basics
1
2
3
4
5
6
7
8
9
●
●
To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
Auto Mode
For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
Other Shooting Modes
P Mode
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
●
●
●
For details on charging time and the number of shots and
recording time possible with a fully charged battery pack, see
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
“Number of Shots/Recording Time, Playback Time” ( 142).
Charged battery packs gradually lose their charge, even when
they are not used. Charge the battery pack on (or immediately
before) the day of use.
Insert the battery pack.
1
( )
1
● After aligning the
marks on the battery
pack and charger, insert the battery pack
by pushing it in (1) and down (2).
The charger can be used in areas with 100 – 240 V AC power
(50/60 Hz). For power outlets in a different format, use a
commercially available adapter for the plug. Never use an
electrical transformer designed for traveling, which may damage
the battery pack.
( )
2
Charge the battery pack.
( )
1
2
● CB-2LF: Flip out the plug (1) and plug the
charger into a power outlet (2).
Index
( )
2
● CB-2LFE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
CB-2LF
● The charging lamp turns orange, and
charging begins.
● When charging is finished, the lamp turns
green.
CB-2LFE
15
● Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
Before Use
Inserting the Battery Pack and Your Memory Card
(Commercially Available)
Basic Guide
Advanced Guide
Insert the included battery pack and a memory card (commercially
available).
Note that before using a memory card that is new or has been
formatted in another device, you should format the memory card with
Close the cover.
4
( )
1
● Lower the cover (1) and hold it down as
you slide it, until it clicks into the closed
position (2).
Camera Basics
1
2
3
4
5
6
7
8
9
=
( )
this camera ( 109).
2
Auto Mode
Open the cover.
( )
2
1
Other Shooting Modes
P Mode
●
For guidelines on how many shots or hours of recording can be
saved on one memory card, see “Number of Shots per Memory
● Slide the cover (1) and open it (2).
=
Card” ( 143).
( )
1
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Insert the battery pack.
2
Removing the Battery Pack and Memory Card
Removing the Battery Pack
● Holding the battery pack with the
terminals (1) facing as shown, press the
battery lock (2) in the direction of the
arrow and insert the battery pack until the
lock clicks shut.
● Open the cover and press the battery
lock in the direction of the arrow.
● If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
● The battery pack will pop up.
( )
1
( )
2
Index
Check the card’s write-protect
switch and insert the memory card.
3
Removing the Memory Card
● Push the memory card in until it clicks,
and then slowly release it.
● Recording is not possible on memory
cards with a write-protect switch when the
switch is in the locked position. Slide the
switch to the unlocked position.
● The memory card will pop up.
● Insert the memory card with the label (1)
facing as shown until it clicks into place.
(1)
16
Before Use
Setting the Date and Time
●
●
Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
Basic Guide
Advanced Guide
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this
way is recorded in image properties when you shoot, and it is used when
you manage images by shooting date or print images showing the date.
To set daylight saving time (1 hour ahead), choose [ ] in step 2
and then choose [ ] by pressing the [ ][ ] buttons.
Camera Basics
=
1
2
3
4
5
6
7
8
9
You can also add a date stamp to shots, if you wish ( 35).
Turn the camera on.
Auto Mode
1
● Press the power button.
Changing the Date and Time
Other Shooting Modes
P Mode
● The [Date/Time] screen is displayed.
Adjust the date and time as follows.
Access the menu screen.
Set the date and time.
1
2
● Press the [
] button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [ ][ ] buttons to choose an
item.
● Press the [ ][ ] buttons to specify the
date.
Choose [Date/Time].
2
● When finished, press the [ ] button.
● Move the zoom lever to choose the [
]
tab.
● Press the [ ][ ] buttons to choose
[Date/Time], and then press the [
button.
]
Index
Change the date and time.
3
Specify your home time zone.
3
● Follow step 2 in “Setting the Date and
● Press the [ ][ ] buttons to choose your
home time zone.
=
Time” ( 17) to adjust the settings.
● Press the [
menu screen.
] button to close the
Finish the setup process.
4
● Press the [ ] button when finished.
After a confirmation message, the setting
screen is no longer displayed.
● To turn off the camera, press the power
button.
17
Before Use
Display Language
●
There is a build-in date/time battery (backup battery) in the
camera. Date/time settings can be retained for about 3 weeks
after the battery pack is removed.
Basic Guide
Advanced Guide
Change the display language as needed.
●
●
The date/time battery will be charged in about 4 hours once you
insert a charged battery pack, even if the camera is left off.
Once the date/time battery is depleted, the [Date/Time] screen will
be displayed when you turn the camera on. Set the correct date
Enter Playback mode.
1
● Press the [
] button.
Camera Basics
1
2
3
4
5
6
7
8
9
=
and time as described in “Setting the Date and Time” ( 17).
Auto Mode
Access the setting screen.
2
Other Shooting Modes
P Mode
● Press and hold the [ ] button, and then
immediately press the [
] button.
Set the display language.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
3
● Press the [ ][ ][ ][ ] buttons to choose
a language, and then press the [
button.
]
● Once the display language has been set,
the setting screen is no longer displayed.
Index
●
●
The current time is displayed if you wait too long in step 2 after
pressing the [ ] button before you press the [
] button.
In this case, press the [ ] button to dismiss the time display and
repeat step 2.
You can also change the display language by pressing the
[
] button and choosing [Language
] on the [ ] tab.
18
Compose the shot.
3
Before Use
Trying the Camera Out
● To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle).
Basic Guide
Advanced Guide
Still Images
Movies
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Shoot.
4
Camera Basics
1
2
3
4
5
6
7
8
9
Shooting Still Images
1) Focus.
Shooting (Smart Auto)
Auto Mode
● Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
Other Shooting Modes
P Mode
Turn the camera on.
1
● If [Raise the flash] is displayed, lift the
flash with your finger to prepare it for use.
If you prefer not to use the flash, push it
down with your finger, into the camera.
● Press the power button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● The startup screen is displayed.
Enter [
] mode.
] button several times
] is displayed.
2
● Press the [
until [
● Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
● Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
Index
● Frames displayed around any detected
subjects indicate that they are in focus.
19
2) Shoot.
Before Use
Viewing
● Press the shutter button all the way
Basic Guide
Advanced Guide
down.
After shooting images or movies, you can view them on the screen as
follows.
● As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
Enter Playback mode.
1
Camera Basics
1
2
3
4
5
6
7
8
9
● Press the [
] button.
● Keep the camera still until the shutter
sound ends.
● Your last shot is displayed.
Auto Mode
● After displaying your shot, the camera will
revert to the shooting screen.
Choose an image.
2
Other Shooting Modes
P Mode
● To view the previous image, press the [
button. To view the next image, press the
] button.
]
Recording Movies
1) Start recording.
[
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the movie button. The camera
beeps once as recording begins, and
[
Rec] is displayed with the elapsed
( )
1
time (1).
● Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
● To access this screen (Scroll Display
mode), press and hold the [ ][ ] buttons
for at least one second. In this mode,
press the [ ][ ] buttons to browse
through images.
● Frames displayed around any detected
faces indicate that they are in focus.
Index
● Once recording begins, take your finger
off the movie button.
● To return to single-image display, press
the [ ] button.
2) Finish recording.
● Press the movie button again to stop
recording. The camera beeps twice as
recording stops.
● Movies are identified by a [
To play movies, go to step 3.
] icon.
20
Play movies.
3
Before Use
=
●
You can choose multiple images to erase at once ( 70).
● Press the [ ] button, press the [ ][
buttons to choose [ ], and then press the
] button again.
● Playback now begins, and after the movie
is finished, [ ] is displayed
]
Basic Guide
Advanced Guide
[
Camera Basics
1
2
3
4
5
6
7
8
9
● To adjust the volume, press the [ ][
buttons.
]
Auto Mode
●
To switch to Shooting mode from Playback mode, press the
shutter button halfway.
Other Shooting Modes
P Mode
Erasing Images
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
You can choose and erase unneeded images one by one. Note that
erased images cannot be recovered. Be sure that you want to erase
images before using this option.
Choose an image to erase.
1
● Press the [ ][ ] buttons to choose an
image.
Erase the image.
2
● Press the [ ] button.
Index
● After [Erase?] is displayed, press the
[
][ ] buttons to choose [Erase], and
then press the [ ] button.
● The current image is now erased.
● To cancel erasure, press the [ ][
]
buttons to choose [Cancel], and then
press the [ ] button.
21
Before Use
On/Off
Basic Guide
Advanced Guide
Advanced Guide
Shooting Mode
1
● Press the power button to turn the
camera on and prepare for shooting.
Camera Basics
1
2
3
4
5
6
7
8
9
● To turn the camera off, press the power
button again.
Camera Basics
Other basic operations and more ways to enjoy your camera, including
shooting and playback options
Auto Mode
Playback Mode
Other Shooting Modes
P Mode
● Press the [
] button to turn the camera
on and view your shots.
● To turn the camera off, press the [
]
button again.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
●
●
To switch to Playback mode from Shooting mode, press the [
button.
]
To switch to Shooting mode from Playback mode, press the
=
shutter button halfway ( 23).
The lens will be retracted after about one minute once the camera
is in Playback mode. You can turn the camera off when the lens is
retracted by pressing the [
] button.
Index
22
Before Use
Power-Saving Features (Auto Power Down)
Shutter Button
Basic Guide
Advanced Guide
As a way to conserve battery power, the camera automatically deactivates
the screen (Display Off) and then turns itself off after a specific period of
inactivity.
To ensure your shots are in focus, always begin by holding the shutter
button halfway down, and once the subject is in focus, press the button all
the way down to shoot.
In this manual, shutter button operations are described as pressing the
button halfway or all the way down.
Camera Basics
Power Saving in Shooting Mode
1
2
3
4
5
6
7
8
9
The screen is automatically deactivated after about one minute of
inactivity. In about two more minutes, the lens is retracted and the camera
turns itself off. To activate the screen and prepare for shooting when
the screen is off but the lens is still out, press the shutter button halfway
Auto Mode
Press halfway. (Press lightly to
focus.)
1
Other Shooting Modes
P Mode
● Press the shutter button halfway. The
camera beeps twice, and frames are
displayed around image areas in focus.
=
(
23).
Power Saving in Playback Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
The camera turns itself off automatically after about five minutes of
inactivity.
Press all the way down. (From the
halfway position, press fully to
shoot.)
2
●
●
You can deactivate Auto Power Down and adjust the timing of
=
Display Off, if you prefer ( 108).
● The camera shoots, as a shutter sound
is played.
Power saving is not active while the camera is connected to other
=
devices via Wi-Fi ( 78), or when connected to a computer
● Keep the camera still until the shutter
sound ends.
=
(
117).
Index
●
●
Images may be out of focus if you shoot without initially pressing
the shutter button halfway.
Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
23
Before Use
Shooting Display Options
Using the FUNC. Menu
Basic Guide
Advanced Guide
Press the [ ] button to view other information on the screen, or to hide
the information. For details on the information displayed, see “On-Screen
Configure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
=
=
(
=
Information” ( 132).
135) or playback mode ( 140).
Camera Basics
1
2
3
4
5
6
7
8
9
Access the FUNC. menu.
1
● Press the [ ] button.
Auto Mode
Information Display
Other Shooting Modes
P Mode
Choose a menu item.
2
● Press the [ ][ ] buttons to choose a
menu item (1), and then press the [ ] or
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
[
] button.
● Available options (2) are listed next to
menu items, on the right.
No Information Display
● Depending on the menu item, functions
can be specified simply by pressing the
( )
2
( )
1
[
] or [ ] button, or another screen is
displayed for configuring the function.
Choose an option.
3
● Press the [ ][ ] buttons to choose an
item.
●
●
Screen brightness is automatically increased by the night view
function when you are shooting under low light, making it easier
to check how shots are composed. However, on-screen image
brightness may not match the brightness of your shots. Note that
any on-screen image distortion or jerky subject motion will not
affect recorded images.
Index
● Options labeled with a [
be configured by pressing the [
button.
] icon can
]
● To return to the menu items, press the
For playback display options, see “Switching Display Modes”
[
] button.
=
(
63).
24
Finish the setup process.
4
Before Use
Using the Menu Screen
● Press the [ ] button.
Basic Guide
Advanced Guide
● The screen before you pressed the
Configure a variety of camera functions through the menu screen as
follows. Menu items are grouped by purpose on tabs, such as shooting
[
] button in step 1 is displayed again,
showing the option you configured.
[
], playback [
], and so on. Note that available menu items vary
=
depending on the selected shooting or playback mode ( 137 –
Camera Basics
1
2
3
4
5
6
7
8
9
=
140).
●
To undo any accidental setting changes, you can restore the
=
camera’s default settings ( 112).
Auto Mode
Access the menu screen.
1
● Press the [
] button.
Other Shooting Modes
P Mode
Choose a tab.
2
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Move the zoom lever to choose a tab.
● After you have pressed the [ ][
buttons to choose a tab initially, you can
switch between tabs by pressing the
]
[
][ ] buttons.
Index
Choose a menu item.
3
● Press the [ ][ ] buttons to choose an
item.
● For menu items with options not shown,
first press the [ ] or [ ] button to switch
screens, and then press the [ ][
buttons to select the menu item.
]
● To return to the previous screen, press
the [ ] button.
25
Choose an option.
4
Before Use
On-Screen Keyboard
● Press the [ ][ ] buttons to choose an
option.
Basic Guide
Advanced Guide
Use the on-screen keyboard to enter information for Wi-Fi connections
78). Note that the length and type of information you can enter
varies depending on the function you are using.
=
(
Finish the setup process.
5
● Press the [
screen displayed before you pressed the
] button in step 1.
] button to return to the
Camera Basics
1
2
3
4
5
6
7
8
9
Entering Characters
[
Auto Mode
● Press the [ ][ ][ ][ ] buttons to choose
a character, and then press the [
button to enter it.
]
Other Shooting Modes
P Mode
●
To undo any accidental setting changes, you can restore the
=
camera’s default settings ( 112).
Moving the Cursor
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Choose [ ] or [ ] and press the [
button.
]
Deleting Characters
● Choose [ ] and press the [ ] button.
The previous character will be deleted.
Confirming Input and Returning to the
Previous Screen
Index
● Press the [
] button.
26
Before Use
Indicator Display
Clock
Basic Guide
Advanced Guide
=
When the following conditions occur, the camera’s indicator ( 4)
blinks green.
You can check the current time.
● Press and hold the [ ] button.
=
- Connecting to a computer ( 117)
● The current time appears.
=
=
=
- Display off ( 23,
108,
108)
Camera Basics
1
2
3
4
5
6
7
8
9
● If you hold the camera vertically while
using the clock function, it will switch to
vertical display. Press the [ ][ ] buttons
to change the display color.
- Starting up, recording/reading a memory card
- Any kind of connecting
Auto Mode
=
- When shooting in Long Shutter mode ( 47)
Other Shooting Modes
P Mode
- Connecting to Wi-Fi/Receiving data
● Press the [ ] button again to cancel the
clock display.
●
When the indicator blinks green, never turn the camera off, open
the memory card/battery cover, or shake or jolt the camera. These
actions may corrupt images or damage the camera or memory
card.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
When the camera is off, press and hold the [ ] button, then
press the power button to display the clock.
Index
27
Before Use
Shooting with Camera-Determined
Settings
Basic Guide
Advanced Guide
2
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
Convenient mode for easy shots with greater control over shooting
Shooting (Smart Auto)
Auto Mode
Still Images
Movies
Other Shooting Modes
P Mode
Turn the camera on.
1
● Press the power button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● The startup screen is displayed.
Enter [
] mode.
] button several times
] is displayed.
2
● Press the [
until [
● Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
● Icons representing the scene and image
stabilization mode are displayed in the
Index
=
upper right of the screen ( 31,
=
32).
● Frames displayed around any detected
subjects indicate that they are in focus.
28
Compose the shot.
3
2) Shoot.
Before Use
● To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle). (A zoom
bar (1) showing the zoom position is
displayed.)
● Press the shutter button all the way
down.
Basic Guide
Advanced Guide
● As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
( )
1
Camera Basics
1
2
3
4
5
6
7
8
9
● To zoom in or out quickly, move the zoom
lever all the way toward [ ] (telephoto)
or [ ] (wide angle), and to zoom in
or out slowly, move it just a little in the
desired direction.
● Keep the camera still until the shutter
sound ends.
Auto Mode
● After displaying your shot, the camera will
revert to the shooting screen.
Other Shooting Modes
P Mode
Recording Movies
1) Start recording.
Shoot.
4
Shooting Still Images
1) Focus.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the movie button. The camera
beeps once as recording begins, and
● Press the shutter button halfway. The
camera beeps twice after focusing, and
AF frames are displayed to indicate
image areas in focus.
[
Rec] is displayed with the elapsed
( )
1
time (1).
● Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
● Several AF frames are displayed when
multiple areas are in focus.
● Frames displayed around any detected
faces indicate that they are in focus.
Index
● Once recording begins, take your finger
off the movie button.
2) Resize the subject and recompose
the shot as needed.
● If [Raise the flash] is displayed, lift the
flash with your finger to prepare it for use.
If you prefer not to use the flash, push it
down with your finger, into the camera.
● To resize the subject, repeat the
operations in step 3.
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
29
Still Images
● When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Before Use
Basic Guide
Advanced Guide
●
A blinking [ ] icon warns that images are more likely to be
blurred by camera shake. In this case, mount the camera on a
tripod or take other measures to keep it still.
3) Finish recording.
● Press the movie button again to stop
recording. The camera beeps twice as
recording stops.
●
●
If your shots are dark despite the flash firing, move closer to the
Camera Basics
=
subject. For details on the flash range, see “Camera” ( 141).
1
2
3
4
5
6
7
8
9
The subject may be too close if the camera only beeps once
when you press the shutter button halfway. For details on the
● Recording will stop automatically when
the memory card becomes full.
Auto Mode
=
range of focus (shooting range), see “Shooting Range” ( 142).
●
●
To reduce red-eye and to assist in focusing, the lamp may be lit
when shooting in low-light conditions.
Other Shooting Modes
P Mode
Still Images/Movies
A blinking [ ] icon displayed when you attempt to shoot
indicates that shooting is not possible until the flash has finished
recharging. Shooting can resume as soon as the flash is ready,
so either press the shutter button all the way down and wait, or
release it and press it again.
●
If the camera is turned on while the [ ] button is held down, the
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
camera will no longer sound. To activate sounds again, press the
[
] button and choose [Mute] on the [ ] tab, and then
press the [ ][ ] buttons to choose [Off].
●
●
Although you can shoot again before the shooting screen
is displayed, your previous shot may determine the focus,
brightness, and colors used.
You can change how long images are displayed after shots
=
(
40).
Index
30
Movies
Before Use
Scene Icons
Basic Guide
Advanced Guide
Still Images
Movies
●
Before shooting a movie, lower the flash with your finger. Be
careful not to touch the microphone (1) when shooting a movie.
Leaving the flash raised, or blocking the microphone may prevent
audio from being recorded or may cause the recording to sound
muffled.
In [
] mode, shooting scenes determined by the camera are indicated
by the icon displayed, and corresponding settings are automatically
selected for optimal focusing, subject brightness, and color.
Camera Basics
1
2
3
4
5
6
7
8
9
When Shooting People
( )
1
Icon
Auto Mode
Background
Background
Color
Shadows
on Face*1
People
In Motion*1
Other Shooting Modes
P Mode
Bright
Gray
●
●
Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
Bright and Backlit
With Blue Sky
–
–
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Light Blue
Once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant
camera shake. To shoot subjects at the same size shown before
Blue Sky and
Backlit
Spotlights
=
shooting, adjust the image stabilization setting ( 59).
Dark
Dark Blue
2
Dark, Using Tripod
–
–
*
●
Audio recording is monaural.
Index
31
Before Use
When Shooting Other Subjects
Image Stabilization Icons
Icon
Background
Color
Background
Other
At Close
Range
In Motion*1
Basic Guide
Advanced Guide
Still Images
Movies
Subjects
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in
Bright
Gray
Bright and Backlit
With Blue Sky
[
] mode.
Camera Basics
1
2
3
4
5
6
7
8
9
Image stabilization for still images (Normal)
Image stabilization for still images when panning (Panning)*
Light Blue
Orange
Blue Sky and
Backlit
Auto Mode
Image stabilization for angle camera shake and shift camera
shake when shooting with macro (Hybrid IS). In movies, [
displayed, and [ ] can further stabilize the image.
Sunsets
–
–
Other Shooting Modes
P Mode
] is
Spotlights
Dark
Image stabilization for movies, reducing strong camera shake, as
when shooting while walking (Dynamic)
Dark Blue
2
Dark, Using Tripod
–
*
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Image stabilization for slow camera shake, such as when
shooting movies at telephoto (Powered)
*1 Not displayed for movies.
*2 Displayed in dark scenes when the camera is held still, as when mounted on a
No image stabilization, because the camera is mounted on
a tripod or held still by other means. However, during movie
recording, [ ] is displayed, and image stabilization to counteract
wind or other sources of vibration is used (Tripod IS).
tripod.
●
The scene icon may not match actual shooting conditions, or it
may not be possible to shoot with your expected effect, color, or
brightness. If such a case occurs, it is recommended that you
* Displayed when you pan, following moving subjects with the camera. When you
follow subjects moving horizontally, image stabilization only counteracts vertical
camera shake, and horizontal stabilization stops. Similarly, when you follow
subjects moving vertically, image stabilization only counteracts horizontal camera
shake.
=
shoot in [ ] mode ( 49).
Index
=
●
To cancel image stabilization, set [IS Mode] to [Off] ( 59). In
this case, an IS icon is not displayed.
32
Before Use
On-Screen Frames
Common, Convenient Features
Basic Guide
Advanced Guide
Still Images
Movies
Still Images
Movies
A variety of frames are displayed once the camera detects subjects you
are aiming the camera at.
Zooming In Closer on Subjects (Digital Zoom)
● A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus. However, if the camera
detects subject movement, only the white frame will remain on the
screen.
Camera Basics
1
2
3
4
5
6
7
8
9
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 168x enlargement.
Auto Mode
Other Shooting Modes
P Mode
Move the zoom lever toward [ ].
1
● When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus
and image brightness are constantly adjusted (Servo AF).
● Hold the lever until zooming stops.
● Zooming stops at the largest zoom factor
before the image becomes noticeably
grainy, which is then indicated on the
screen.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
Depending on the shooting conditions and subject, no frames
may be displayed, frames may not be displayed around desired
subjects, or frames may be displayed on the background or
similar areas. If such a case occurs, it is recommended that you
( )
1
Move the zoom lever toward [
again.
]
2
=
shoot in [ ] mode ( 49).
● The camera zooms in even closer on the
subject.
● (1) is the current zoom factor.
Index
33
Shoot.
2
Before Use
●
Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change
depending on the zoom range.
● For Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
Basic Guide
Advanced Guide
- White range: optical zoom range where the image will not
appear grainy.
● For Movies: Press the movie button.
- Yellow range: digital zoom range where the image is not
noticeably grainy (ZoomPlus).
● Once you start the self-timer, the lamp
will blink and the camera will play a self-
timer sound.
Camera Basics
1
2
3
4
5
6
7
8
9
- Blue range: digital zoom range where the image will appear
grainy.
Auto Mode
● Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
●
●
Because the blue range will not be available at some recording
=
pixel settings ( 37), the maximum zoom factor can be
Other Shooting Modes
P Mode
achieved by following step 1.
● To cancel shooting after you have
triggered the self-timer, press the
[
] button.
=
To deactivate digital zoom, choose MENU ( 25) > [ ] tab >
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● To restore the original setting, choose [
in step 1.
]
[Digital Zoom] > [Off].
Using the Self-Timer to Avoid Camera Shake
Using the Self-Timer
Still Images
Movies
This option delays shutter release until about two seconds after you
have pressed the shutter button. If the camera is unsteady while you are
pressing the shutter button, it will not affect your shot.
Still Images
Movies
With the self-timer, you can include yourself in group photos or other
timed shots. The camera will shoot about 10 seconds after you press the
shutter button.
● Follow step 1 in “Using the Self-Timer”
=
(
34) and choose [ ].
Index
● Once the setting is complete, [ ] is
displayed.
Configure the setting.
1
● Press the [ ] button, choose [ ] in the
menu, and then choose [ ] ( 24).
● Follow step 2 in “Using the Self-Timer”
=
=
(
34) to shoot.
● Once the setting is complete, [ ] is
displayed.
34
Customizing the Self-Timer
Before Use
Adding a Date Stamp
Still Images
Movies
Basic Guide
Advanced Guide
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
Still Images
Movies
The camera can add the shooting date to images, in the lower-right
Choose [ ].
1
corner.
● Following step 1 in “Using the Self-Timer”
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct ( 17).
Camera Basics
1
2
3
4
5
6
7
8
9
=
(
[
34), choose [ ] and press the
=
] button immediately.
Auto Mode
Configure the setting.
1
Configure the setting.
2
● Press the [
] button, choose [Date
Stamp ] on the [ ] tab, and then
Other Shooting Modes
P Mode
● Press the [ ][ ] buttons to choose
[Delay] or [Shots].
=
choose the desired option ( 25).
● Press the [ ][ ] buttons to choose a
value, and then press the [ ] button.
● Once the setting is complete, [ ] is
displayed.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Once the setting is complete, [ ] is
displayed.
● Follow step 2 in “Using the Self-Timer”
=
(
34) to shoot.
Shoot.
2
● As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
●
●
For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
Index
● To restore the original setting, choose
[Off] in step 1.
When you specify multiple shots, image brightness and white
balance are determined by the first shot. More time is required
between shots when the flash fires or when you have specified
to take many shots. Shooting will stop automatically when the
memory card becomes full.
●
Date stamps cannot be edited or removed.
●
When a delay longer than two seconds is specified, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the flash fires.)
35
Before Use
●
Shots taken without adding a date stamp can be printed with one
as follows.
●
During continuous shooting, focus and exposure are locked at the
position/level determined when you pressed the shutter button
halfway.
Basic Guide
Advanced Guide
However, adding a date stamp this way to images that already
have one may cause it to be printed twice.
=
●
●
Cannot be used with the self-timer ( 34).
=
- Print using printer functions ( 119)
Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
=
- Use camera DPOF print settings ( 123) to print
Camera Basics
1
2
3
4
5
6
7
8
9
●
●
As more shots are taken, shooting may slow down.
Shooting may slow down if the flash fires.
Continuous Shooting
Auto Mode
Still Images
Hold the shutter button all the way down to shoot continuously.
Movies
Other Shooting Modes
P Mode
=
For details on the continuous shooting speed, see “Camera” ( 141).
Configure the setting.
1
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [ ] button, choose [ ] in the
=
menu, and then choose [ ] ( 24).
● Once the setting is complete, [ ] is
displayed.
Index
Shoot.
2
● Hold the shutter button all the way down
to shoot continuously.
36
Before Use
Changing Image Resolution (Size)
Image Customization Features
Basic Guide
Advanced Guide
Still Images
Movies
Choose from 4 levels of image resolution, as follows. For guidelines on
how many shots at each recording pixel setting can fit on a memory card,
Changing the Aspect Ratio
=
see “Number of Shots per Memory Card” ( 143).
● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
Camera Basics
1
2
3
4
5
6
7
8
9
Still Images
Movies
Change the image aspect ratio (ratio of width to height) as follows.
Auto Mode
=
(
24).
● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
● The option you configured is now
displayed.
Other Shooting Modes
P Mode
=
(
24).
● Once the setting is complete, the screen
aspect ratio will be updated.
● To restore the original setting, repeat this
process but choose [ ].
● To restore the original setting, repeat this
process but choose [ ].
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Guidelines for Choosing Resolution Based on Paper
Size (for 4:3 Images)
Same aspect ratio as widescreen HDTVs.
A2 (16.5 x 23.4 in.)
Same aspect ratio as 35mm film. Used for printing images at 5 x
7-inch or postcard sizes.
A3 – A5 (11.7 x 16.5 – 5.8 x 8.3 in.)
3.5 x 5 in., 5 x 7 in., Postcard
For e-mailing and similar purposes
Index
Native aspect ratio of the camera screen. Used for display on
standard-definition televisions or similar display devices. Also
used for printing images at 3.5 x 5-inch or A-series sizes.
Square aspect ratio.
37
Before Use
Changing Movie Image Quality
Helpful Shooting Features
Basic Guide
Advanced Guide
Still Images
Movies
2 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
Displaying Grid Lines
=
see “Recording Time per Memory Card” ( 143).
Camera Basics
1
2
3
4
5
6
7
8
9
Still Images
Movies
● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
Grid lines can be displayed on the screen for vertical and horizontal
reference while shooting.
Auto Mode
=
(
24).
● Press the [
] button, choose [Grid
Lines] on the [ ] tab, and then choose
● The option you configured is now
displayed.
Other Shooting Modes
P Mode
=
[On] ( 25).
● To restore the original setting, repeat this
process but choose [ ].
● Once the setting is complete, grid lines
are displayed on the screen.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● To restore the original setting, repeat this
process but choose [Off].
Image
Quality
Resolution
1280 x 720
640 x 480
Frame Rate
25 fps
30 fps
Details
For shooting in HD
For shooting in
standard definition
●
Grid lines are not recorded in your shots.
Index
●
In [ ] mode, black bars are displayed on the top and bottom
edges of the screen. The black bars indicate image areas not
recorded.
38
Before Use
Magnifying the Area in Focus
Customizing Camera Operation
Basic Guide
Advanced Guide
Still Images
Movies
Customize shooting functions on the [ ] tab of the menu screen as
follows.
For instructions on menu functions, see “Using the Menu Screen”
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
=
(
25).
Camera Basics
1
2
3
4
5
6
7
8
9
Configure the setting.
1
● Press the [
] button, choose [AF-
Auto Mode
Deactivating the AF-Assist Beam
Point Zoom] on the [ ] tab, and then
=
choose [On] ( 25).
Still Images
Movies
Other Shooting Modes
P Mode
The lamp normally lights up to help you focus when you press the shutter
button halfway in low-light conditions. If you prefer, you can deactivate the
lamp.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [
] button, choose [AF-
assist Beam] on the [ ] tab, and then
choose [Off] ( 25).
=
● To restore the original setting, repeat this
process but choose [On].
Check the focus.
2
● Press the shutter button halfway. The
face detected as the main subject is now
magnified.
● To restore the original setting, choose
[Off] in step 1.
Index
●
The area in focus is not magnified in the following cases when the
shutter button is pressed halfway.
- If a face was not detected, if the person is too close to the
camera and their face is too large for the screen, or if the
camera detects subject movement
=
- When digital zoom is used ( 33)
=
- When Tracking AF is used ( 56)
=
- When a TV is used as a display ( 116)
39
Before Use
Deactivating the Red-Eye Reduction Lamp
Changing the Image Display Style after Shots
Basic Guide
Advanced Guide
Still Images
Movies
Still Images
Movies
A lamp lights up to reduce red-eye when the flash is used in low-light
shots. If you prefer, you can deactivate the lamp.
You can change how long images are displayed and what information is
displayed immediately after shooting.
Camera Basics
1
2
3
4
5
6
7
8
9
Changing the Image Display Period after Shots
Access the [Flash Settings] screen.
1
● Press the [
] button, choose [Flash
Auto Mode
Settings] on the [ ] tab, and then press
Access the [Review image after
shooting] screen.
1
=
the [ ] button ( 25).
Other Shooting Modes
P Mode
● Press the [
] button, choose
Configure the setting.
2
[Review image after shooting] on the
● Choose [Red-Eye Lamp], and then
[
] tab, and then press the [ ] button
=
choose [Off] ( 25).
=
(
25).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● To restore the original setting, repeat this
process but choose [On].
Configure the setting.
2
● Press the [ ][ ] buttons to choose
[Display Time]. Press the [ ][ ] buttons
to choose the desired option.
● To restore the original setting, repeat this
process but choose [Quick].
Quick
Displays images only until you can shoot again.
2 sec.,
4 sec.,
8 sec.
Displays images for the specified time. Even while the
shot is displayed, you can take another shot by pressing
the shutter button halfway again.
Index
Displays images until you press the shutter button
halfway.
Hold
Off
No image display after shots.
40
Changing the Screen Displayed after Shots
Before Use
Change the way images are displayed after shots as follows.
Basic Guide
Advanced Guide
Set [Display Time] to [2 sec.],
1
[4 sec.], [8 sec.], or [Hold] (=40).
Configure the setting.
Camera Basics
2
1
2
3
4
5
6
7
8
9
● Press the [ ][ ] buttons to choose
[Display Info]. Press the [ ][ ] buttons to
choose the desired option.
Auto Mode
Other Shooting Modes
P Mode
● To restore the original setting, repeat this
process but choose [Off].
Off
Displays only the image.
Detailed
=
Displays shooting details ( 133).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
●
●
When [Display Time] ( 40) is set to [Off] or [Quick], [Display
Info] is set to [Off] and cannot be changed.
By pressing the [ ] button while an image is displayed after
shooting, you can switch the display information. Note that the
settings of [Display Info] are not changed. You can also erase
=
images by pressing the [ ] button, or protect ( 67) or tag
=
images as favorites ( 72) by pressing the [ ] button.
Index
41
Before Use
Brightness / Color Customization
(Live View Control)
Basic Guide
Advanced Guide
3
Still Images
Movies
Image brightness or colors when shooting can be easily customized as
follows.
Camera Basics
1
2
3
4
5
6
7
8
9
Other Shooting Modes
Shoot more effectively in various scenes, and take shots enhanced with
unique image effects or captured using special functions
Auto Mode
Enter [
] mode.
] button several times
] is displayed.
1
● Press the [
until [
Other Shooting Modes
P Mode
Configure the setting.
2
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [ ] button to access the setting
screen. Press the [ ][ ] buttons to
choose a setting item, and then press the
[
][ ] buttons to adjust the value as you
watch the screen.
● Press the [ ] button.
Shoot.
3
For brighter images, adjust the level to the right, and
for darker images, adjust it to the left.
Brightness
Color
Index
For more vivid images, adjust the level to the right,
and for more subdued images, adjust it to the left.
For a warm, reddish tone, adjust the level to the right,
and for a cool, bluish tone, adjust it to the left.
Tone
42
ꢀ
Shooting Fireworks (Fireworks)
Before Use
Specific Scenes
Still Images
Movies
Basic Guide
Advanced Guide
● Vivid shots of fireworks.
Choose a mode matching the shooting scene, and the camera will
automatically configure the settings for optimal shots.
Choose a shooting mode.
1
Camera Basics
1
2
3
4
5
6
7
8
9
● Press the [
] button several times
until [
] is displayed.
Auto Mode
●
In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
● Press the [ ] button, choose [
the menu, and choose the desired option
] in
Other Shooting Modes
P Mode
=
(
24).
=
means to secure the camera ( 59).
Shoot.
2
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
●
[
] mode resolution is [ ] (2,560 x 1,920 pixels) and cannot be
Shooting Portraits (Portrait)
Still Images
changed.
Movies
In [ ] mode, although no frames are displayed when you press
the shutter button halfway, optimal focus is still determined.
● Take shots of people with a softening
effect.
Shooting under Low Light (Low Light)
Still Images
Movies
Index
● Shoot with minimal camera and subject
shake even in low-light conditions.
43
Before Use
Shooting with a Fish-Eye Lens Effect (Fish-Eye
Effect)
Applying Special Effects
Basic Guide
Advanced Guide
Add a variety of effects to images when shooting.
Still Images
Movies
Choose a shooting mode.
1
Shoot with the distorting effect of a fish-eye lens.
Camera Basics
● Follow step 1 in “Specific Scenes”
1
2
3
4
5
6
7
8
9
Choose [ ].
=
(
43) to choose a shooting mode.
1
Auto Mode
● Follow step 1 in “Specific Scenes”
Shoot.
2
=
(
43) and choose [ ].
Other Shooting Modes
P Mode
Shooting in Vivid Colors (Super
Vivid)
Choose an effect level.
2
● Press the [ ] button, press the [ ][
]
Still Images
Movies
buttons to choose an effect level, and
then press the [ ] button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Shots in rich, vivid colors.
● A preview is shown of how your shot will
look with the effect applied.
Shoot.
Posterized Shots (Poster Effect)
3
Still Images
Movies
●
Try taking some test shots first, to make sure you obtain the
● Shots that resemble an old poster or
illustration.
desired results.
Index
●
In [ ] and [ ] modes, try taking some test shots first, to make
sure you obtain the desired results.
44
Playback Speed and Estimated Playback Time (for
One-Minute Clips)
Before Use
Shots Resembling Miniature Models (Miniature
Effect)
Basic Guide
Advanced Guide
Speed
Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
Still Images
Movies
Creates the effect of a miniature model, by blurring image areas above
and below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and
objects in the scene will move quickly during playback. Note that sound is
not recorded.
Camera Basics
1
2
3
4
5
6
7
8
9
Movies are played back at 30 fps.
Auto Mode
●
●
The zoom is not available when shooting movies. Be sure to set
the zoom before shooting.
Other Shooting Modes
P Mode
Choose [ ].
1
Try taking some test shots first, to make sure you obtain the
desired results.
● Follow step 1 in “Specific Scenes”
=
(
43) and choose [ ].
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● A white frame is displayed, indicating the
image area that will not be blurred.
●
●
To switch the orientation of the frame to vertical, press the [ ][
buttons in step 2. To return the frame to horizontal orientation,
press the [ ][ ] buttons.
]
Choose the area to keep in focus.
2
To move the frame when it is in horizontal orientation, press the
● Press the [ ] button.
[
][ ] buttons, and to move the frame when it is in vertical
● Move the zoom lever to resize the frame,
and press the [ ][ ] buttons to move it.
orientation, press the [ ][ ] buttons.
Holding the camera vertically will change the orientation of the
frame.
●
●
Movie image quality is [
] at an aspect ratio of [ ] and [
]
Index
=
at an aspect ratio of [ ] ( 37). These quality settings cannot
be changed.
For movies, choose the movie
playback speed.
3
● Press the [
] button, and then
press the [ ][ ] buttons to choose the
speed.
Return to the shooting screen and
shoot.
4
● Press the [
] button to return to the
shooting screen, and then shoot.
45
Before Use
Shooting with a Toy Camera Effect (Toy Camera
Effect)
Shooting in Monochrome
Basic Guide
Advanced Guide
Still Images
Movies
Still Images
Movies
Shoot images in black and white, sepia, or blue and white.
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
Choose [ ].
1
Camera Basics
1
2
3
4
5
6
7
8
9
● Follow step 1 in “Specific Scenes”
=
(
Choose [ ].
43) and choose [ ].
1
Auto Mode
● Follow step 1 in “Specific Scenes”
Choose a color tone.
2
=
(
43) and choose [
].
Other Shooting Modes
P Mode
● Press the [ ] button, press the [ ][
buttons to choose a color tone, and then
press the [ ] button.
]
Choose a color tone.
2
● Press the [ ] button, press the [ ][
]
● A preview is shown of how your shot will
look with the effect applied.
buttons to choose a color tone, and then
press the [ ] button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● A preview is shown of how your shot will
look with the effect applied.
Shoot.
3
B/W
Black and white shots.
Sepia tone shots.
Shoot.
3
Sepia
Blue
Blue and white shots.
Standard
Warm
Shots resemble toy camera images.
Images have a warmer tone than with [Standard].
Images have a cooler tone than with [Standard].
Cool
Index
●
Try taking some test shots first, to make sure you obtain the
desired results.
46
Join the subjects in the shooting
area and look at the camera.
4
Before Use
Special Modes for Other Purposes
Basic Guide
Advanced Guide
● After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
Using the Face Self-Timer
Camera Basics
1
2
3
4
5
6
7
8
9
Still Images
Movies
● To cancel shooting after you have
triggered the self-timer, press the
The camera will shoot about two seconds after detecting that the face of
Auto Mode
=
another person (such as the photographer) ( 56) has entered the
[
] button.
shooting area. This is useful when including yourself in group photos or
similar shots.
Other Shooting Modes
P Mode
●
●
Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
To change the number of shots, after choosing [ ] in step 1,
press the [ ] button, choose the number of shots by pressing the
Choose [ ].
1
● Follow step 1 in “Specific Scenes”
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
(
43) and choose [ ].
[
][ ] buttons, and then press the [ ] button.
Compose the shot and press the
shutter button halfway.
2
Shooting Long Exposures (Long Shutter)
● Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
Still Images
Movies
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
Press the shutter button all the way
down.
3
Index
● The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
Choose [ ].
1
● Follow step 1 in “Specific Scenes”
=
(
● The lamp blinks and the self-timer sound
is played.
43) and choose [ ].
47
Choose the shutter speed.
2
Before Use
● Press the [ ] button, press the [ ][
]
Basic Guide
Advanced Guide
buttons to choose the shutter speed, and
then press the [ ] button.
Check the exposure.
3
Camera Basics
● Press the shutter button halfway to view
the exposure for your selected shutter
speed.
1
2
3
4
5
6
7
8
9
Auto Mode
Shoot.
4
Other Shooting Modes
P Mode
●
●
●
On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your
shots.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
With shutter speeds of 1.3 seconds or slower, there will be a
delay before you can shoot again, as the camera processes
images to reduce noise.
Set [IS Mode] to [Off] when using a tripod or other means to
=
secure the camera ( 59).
●
If the flash fires, your shot may be overexposed. In this case, set
=
the flash to [ ] and shoot again ( 58).
Index
48
Before Use
Shooting in Program AE ([P] Mode)
Basic Guide
Advanced Guide
Still Images
Movies
4
You can customize many function settings to suit your preferred shooting
style.
Camera Basics
1
2
3
4
5
6
7
8
9
Enter [ ] mode.
1
P Mode
More discerning shots, in your preferred shooting style
Auto Mode
● Follow step 1 in “Specific Scenes”
=
(
43) and choose [ ].
Other Shooting Modes
P Mode
Customize the settings as desired
(=50 – =59), and then shoot.
● Instructions in this chapter apply to the camera when set to [ ] mode.
● [ ]: Program AE; AE: Auto Exposure.
2
● Before using a function introduced in this chapter in modes other than
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
[
], make sure the function is available in that mode ( 134).
●
●
If adequate exposure cannot be obtained when you press the
shutter button halfway, the shutter speed and aperture value are
displayed in orange. In this case, try adjusting the ISO speed
=
=
58),
(
51) or activating the flash (if subjects are dark,
which may enable adequate exposure.
Movies can be recorded in [ ] mode as well, by pressing the
=
movie button. However, some FUNC. ( 24) and MENU
=
recording.
(
25) settings may be automatically adjusted for movie
Index
49
Before Use
Changing the Metering Method
Image Brightness (Exposure)
Basic Guide
Advanced Guide
Still Images
Movies
Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
Adjusting Image Brightness (Exposure
Compensation)
● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=24).
Camera Basics
1
2
3
4
5
6
7
8
9
Still Images
Movies
Auto Mode
● The option you configured is now
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –2 to +2.
displayed.
Other Shooting Modes
P Mode
● Press the [ ] button. As you watch the
screen, press the [ ][ ] buttons to adjust
brightness.
For typical shooting conditions, including backlit
shots. Automatically adjusts exposure to match the
shooting conditions.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● When shooting movies, shoot with the
exposure compensation bar displayed.
Evaluative
● When shooting still images, press the
Center
Weighted
Avg.
Determines the average brightness of light across
the entire image area, calculated by treating
brightness in the central area as more important.
[
] button to display the set exposure
compensation amount, and then shoot.
Metering restricted to within the [ ] (Spot AE
Point frame), displayed in the center of the screen.
●
●
You can also shoot still images with the exposure compensation
bar displayed.
Spot
While recording a movie, [
] is displayed, and the exposure is
locked.
Index
50
Before Use
Changing the ISO Speed
Correcting Image Brightness (i-Contrast)
Basic Guide
Advanced Guide
Still Images
Movies
Still Images
Movies
When the ISO speed setting is [AUTO], it is set automatically to suit the
shooting mode and scene. The higher the value the ISO speed is, the
greater the light sensitivity is. The lower the value the ISO speed is, the
smaller the light sensitivity is.
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness. Insufficient overall image contrast can also be automatically
corrected before shooting to make subjects stand out better.
Camera Basics
1
2
3
4
5
6
7
8
9
● Press the [
] button, choose
[i-Contrast] on the [ ] tab, and then
Auto Mode
● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
=
choose [Auto] ( 25).
Other Shooting Modes
P Mode
=
(
24).
● Once the setting is complete, [ ] is
● The option you configured is now
displayed.
displayed.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
●
Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
●
●
To view the automatically determined ISO speed when you have
set the ISO speed to [AUTO], press the shutter button halfway.
Although choosing a lower ISO speed may reduce image
graininess, there may be a greater risk of subject and camera
shake in some shooting conditions.
=
You can also correct existing images ( 75).
●
Choosing a higher ISO speed will increase shutter speed, which
may reduce subject and camera shake and increase the flash
range. However, shots may look grainy.
Index
51
Custom White Balance
Before Use
Image Colors
Still Images
Movies
Basic Guide
Advanced Guide
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
Adjusting White Balance
● Follow the steps in “Adjusting White
Balance” ( 52) to choose [ ].
Camera Basics
1
2
3
4
5
6
7
8
9
=
Still Images
Movies
● Aim the camera at a plain white subject,
so that the entire screen is white. Press
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
Auto Mode
the [
] button.
● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
Other Shooting Modes
P Mode
● The tint of the screen changes once the
white balance data has been recorded.
=
(
24).
● The option you configured is now
●
Colors may look unnatural if you change camera settings after
displayed.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
recording white balance data.
Automatically sets the optimal white balance for the
shooting conditions
Auto
Changing Image Color Tones (My Colors)
Day Light
Cloudy
For shooting outdoors in fair weather
Still Images
Movies
For shooting in cloudy weather or at twilight
For shooting under ordinary incandescent lighting
Change image color tones as desired, such as converting images to sepia
Tungsten
or black and white.
Fluores-
cent
● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
For shooting under white fluorescent lighting
Index
Fluores-
cent H
=
(
24).
For shooting under daylight fluorescent lighting
● The option you configured is now
displayed.
For manually setting a custom white balance
Custom
=
(
52)
52
Custom Color
Before Use
–
My Colors Off
Vivid
Still Images
Movies
Emphasizes contrast and color saturation,
making images sharper.
Basic Guide
Advanced Guide
Choose the desired level of image contrast, sharpness, color saturation,
red, green, blue, and skin tones in a range of 1 – 5.
Tones down contrast and color saturation
for subdued images.
Neutral
Access the setting screen.
1
Sepia
B/W
Creates sepia tone images.
Camera Basics
1
2
3
4
5
6
7
8
9
● Follow the steps in “Changing Image
Creates black and white images.
=
Color Tones (My Colors)” ( 52) to
Combines the effects of Vivid Blue, Vivid
Green, and Vivid Red to produce intense
yet natural-looking colors resembling
images on positive film.
Auto Mode
choose [ ], and then press the [
button.
]
Positive Film
Other Shooting Modes
P Mode
Configure the setting.
2
Lighter Skin Tone
Darker Skin Tone
Lightens skin tones.
Darkens skin tones.
● Press the [ ][ ] buttons to choose
an item, and then specify the value by
pressing the [ ][ ] buttons.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Emphasizes blues in images. Makes the
sky, ocean, and other blue subjects more
vivid.
Vivid Blue
● For stronger/more intense effects (or
darker skin tones), adjust the value to
the right, and for weaker/lighter effects
Emphasizes greens in images. Makes
mountains, foliage, and other green
subjects more vivid.
(or lighter skin tones), adjust the value to
Vivid Green
the left.
Emphasizes reds in images. Makes red
● Press the [
] button to complete
Vivid Red
subjects more vivid.
the setting.
Adjust contrast, sharpness, color saturation,
and other qualities as desired ( 53).
Custom Color
=
Index
=
●
●
White balance ( 52) cannot be set in [ ] or [ ] modes.
With [ ] and [ ] modes, colors other than people’s skin tone
may change. These settings may not produce the expected
results with some skin tones.
53
Before Use
Shooting Distant Subjects (Infinity)
Shooting Range and Focusing
Basic Guide
Advanced Guide
Still Images
Movies
To restrict the focus to distant subjects, set the camera to [ ]. For details
on the range of focus, see “Shooting Range” ( 142).
Shooting Close-Ups (Macro)
=
● Press the [ ] button, press the [ ][
buttons to choose [ ], and then press
the [ ] button.
]
Camera Basics
1
2
3
4
5
6
7
8
9
Still Images
Movies
To restrict the focus to subjects at close range, set the camera to [ ]. For
Auto Mode
=
details on the range of focus, see “Shooting Range” ( 142).
● Once the setting is complete, [ ] is
displayed.
● Press the [ ] button, press the [ ][
buttons to choose [ ], and then press the
] button.
]
Other Shooting Modes
P Mode
[
● Once the setting is complete, [ ] is
displayed.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Digital Tele-Converter
Still Images
Movies
The focal length of the lens can be increased by approximately 1.6x or
2.0x. This can reduce camera shake because the shutter speed is faster
than it would be if you zoomed (including using digital zoom) in to the
same zoom factor.
●
●
●
If the flash fires, vignetting may occur.
Be careful to avoid damaging the lens.
When the zoom position is within the range of the yellow bar
below the zoom bar, [ ] turns gray and the camera cannot focus.
● Press the [
] button, choose
[Digital Zoom] on the [ ] tab, and then
=
choose the desired option ( 25).
Index
●
To prevent camera shake, try mounting the camera on a tripod
● The view is enlarged and the zoom factor
is displayed on the screen.
=
and shooting with the camera set to [ ] ( 34).
●
The digital tele-converter cannot be used with digital zoom
=
(
=
33) or AF-point zoom ( 39).
54
Before Use
Changing the AF Frame Mode
●
The shutter speed may be equivalent when you move the zoom
lever all the way toward [ ] for maximum telephoto, and when
you zoom in to enlarge the subject to the same size following step
Basic Guide
Advanced Guide
Still Images
Movies
=
2 in “Zooming In Closer on Subjects (Digital Zoom)” ( 33).
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
● Press the [
Frame] on the [ ] tab, and then choose
the desired option ( 25).
] button, choose [AF
Camera Basics
1
2
3
4
5
6
7
8
9
=
Auto Mode
Other Shooting Modes
P Mode
Center
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Still Images
Movies
One AF frame is displayed in the center. Effective for reliable focusing.
●
A yellow AF frame is displayed with [ ] if the camera cannot
focus when you press the shutter button halfway.
●
●
●
To reduce the AF frame size, press the [
] button and set
=
[AF Frame Size] on the [ ] tab to [Small] ( 25).
Index
The AF frame size is set to [Normal] when you use the digital
=
=
zoom ( 33) or digital tele-converter ( 54).
To compose shots so that subjects are positioned at the edge or
in a corner, first aim the camera to capture the subject in an AF
frame, and then hold the shutter button halfway down. As you
continue to hold the shutter button halfway, recompose the shot
as desired, and then press the shutter button all the way down
(Focus Lock).
●
The AF frame position is enlarged when you press the shutter
=
button halfway with [AF-Point Zoom] ( 39) set to [On].
55
Face AiAF
Choosing Subjects to Focus On (Tracking AF)
Still Images
Before Use
Still Images
Movies
Movies
Basic Guide
Advanced Guide
Shoot after choosing a subject to focus on as follows.
● Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
Choose [Tracking AF].
1
● After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other
detected faces.
● Follow the steps in “Changing the AF
Camera Basics
1
2
3
4
5
6
7
8
9
=
Frame Mode” ( 55) to choose
[Tracking AF].
Auto Mode
● [ ] is displayed in the center of the
screen.
● When the camera detects movement, frames will follow moving
subjects, within a certain range.
Other Shooting Modes
P Mode
● After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
Choose a subject to focus on.
2
● Aim the camera so that [ ] is on the
desired subject, and then press the [
button.
]
●
●
●
If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in
the areas in focus when you press the shutter button halfway.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
If faces are not detected when Servo AF ( 57) is set to [On],
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
● When the subject is detected, the camera
beeps and [ ] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
Examples of faces that cannot be detected:
- Subjects that are distant or extremely close.
- Subjects that are dark or light.
● If no subject is detected, [ ] is displayed.
- Faces in profile, at an angle, or partly hidden.
The camera may misinterpret non-human subjects as faces.
No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
●
●
● To cancel tracking, press the [ ] button
again.
Index
Shoot.
3
● Press the shutter button halfway. [
]
changes to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
=
(
57).
● Press the shutter button all the way down
to shoot.
56
● Even after your shot, [ ] is still displayed
and the camera continues to track the
subject.
Before Use
●
●
Focusing may not be possible in some shooting conditions.
In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the
specified AF frame mode.
Basic Guide
Advanced Guide
=
●
●
[Servo AF] ( 57) is set to [On] and cannot be changed.
Tracking may not be possible when subjects are too small or
move too rapidly, or when subject color or brightness matches
that of the background too closely.
●
If adequate exposure cannot be obtained, the shutter speed
and aperture value are displayed in orange. Release the shutter
button, and then press it halfway again.
Camera Basics
1
2
3
4
5
6
7
8
9
=
●
●
[AF-Point Zoom] on the [ ] tab ( 25) is not available.
=
●
●
[AF-Point Zoom] on the [ ] tab ( 25) is not available.
Auto Mode
[
] and [ ] are not available.
=
Not available when using the self-timer ( 34).
Other Shooting Modes
P Mode
●
The camera can detect subjects even if you press the shutter
button halfway without pressing the [ ] button. After your shot,
Changing the Focus Setting
[
] is displayed in the center of the screen.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Still Images
Movies
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed.
Instead, you can limit camera focusing to the moment you press the
shutter button halfway.
Shooting with Servo AF
Still Images
Movies
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
● Press the [
] button, choose
[Continuous AF] on the [ ] tab, and then
=
choose [Off] ( 25).
Configure the setting.
1
● Press the [
] button, choose [Servo
Index
AF] on the [ ] tab, and then choose [On]
=
(
25).
Helps avoid missing sudden photo opportunities, because
the camera constantly focuses on subjects until you press
the shutter button halfway.
Focus.
2
On
Off
● The focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
Conserves battery power, because the camera does not
focus constantly.
57
Before Use
●
●
In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
Flash
Basic Guide
Advanced Guide
=
means to secure the camera ( 59).
In [ ] mode, even after the flash fires, ensure that the main
Changing the Flash Mode
subject does not move until the shutter sound is finished playing.
Camera Basics
1
2
3
4
5
6
7
8
9
Still Images
Movies
You can change the flash mode to match the shooting scene. For details
Off
Auto Mode
=
on the flash range, see “Camera” ( 141).
For shooting without the flash.
Other Shooting Modes
P Mode
Lift the flash.
1
2
●
A blinking [ ] icon may be displayed when you press the shutter
Configure the setting.
button halfway in camera-shake inducing, low-light conditions. In
this case, mount the camera on a tripod or take other measures
to keep it still.
● Press the [ ] button, press the [ ][
buttons to choose a flash mode, and then
press the [ ] button.
]
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● The option you configured is now
displayed.
●
The setting screen cannot be accessed by pressing the [
]
button when the flash is lowered. Lift the flash with your finger in
advance.
Index
Auto
Fires automatically in low-light conditions.
On
Fires for each shot.
Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of flash range.
58
Before Use
Changing the IS Mode Settings
Other Settings
Basic Guide
Advanced Guide
Still Images
Movies
Changing the Compression Ratio (Image Quality)
Access the setting screen.
1
● Press the [
] button, choose [IS
Settings] on the [ ] tab, and then press
Camera Basics
1
2
3
4
5
6
7
8
9
Still Images
Movies
Choose from two compression ratios, as follows. Choose from [
(Super Fine) and [ ] (Fine). For guidelines on how many shots at each
compression ratio can fit on a memory card, see “Number of Shots per
]
=
the [ ] button ( 25).
Auto Mode
Configure the setting.
2
Other Shooting Modes
P Mode
=
Memory Card” ( 143).
● Choose [IS Mode], and then choose the
● Press the [ ] button, choose [ ] in the
=
desired option ( 25).
menu, and choose the desired option
Optimal image stabilization for the shooting conditions is
Continuous
=
(
24).
=
automatically applied (Intelligent IS) ( 32).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Shoot
Only*
Image stabilization is active only at the moment of
shooting.
Off
Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
●
If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
Index
59
Shooting Movies with Subjects at the Same Size
Shown before Shooting
Before Use
Basic Guide
Advanced Guide
Still Images
Movies
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant camera
shake. To shoot subjects at the same size shown before shooting, you can
choose not to reduce significant camera shake.
Camera Basics
1
2
3
4
5
6
7
8
9
● Follow the steps in “Changing the IS
Auto Mode
=
Mode Settings” ( 59) to access the
[IS Settings] screen.
Other Shooting Modes
P Mode
● Choose [Dynamic IS], and then choose
=
[2] ( 25).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
●
●
When you set the movie quality to [ ] ( 38), it is locked at
[1].
You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
Index
60
Before Use
Viewing
Basic Guide
Advanced Guide
Still Images
Movies
5
After shooting images or movies, you can view them on the screen as
follows.
Camera Basics
1
2
3
4
5
6
7
8
9
Enter Playback mode.
1
Playback Mode
Have fun reviewing your shots, and browse or edit them in many ways
Auto Mode
● Press the [
] button.
● Your last shot is displayed.
Other Shooting Modes
P Mode
● To prepare the camera for these operations, press the [
] button to
Choose an image.
2
enter Playback mode.
● To view the previous image, press the [
button. To view the next image, press the
] button.
]
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
It may not be possible to play back or edit images that were
[
renamed or already edited on a computer, or images from other
cameras.
● To access this screen (Scroll Display
mode), press and hold the [ ][ ] buttons
for at least one second. In this mode,
press the [ ][ ] buttons to browse
through images.
Index
● To return to single-image display, press
the [ ] button.
● To browse images grouped by shooting
date, press the [ ][ ] buttons in Scroll
Display mode.
61
Before Use
● Movies are identified by a [
To play movies, go to step 3.
] icon.
●
●
●
To switch to Shooting mode from Playback mode, press the
shutter button halfway.
Basic Guide
Advanced Guide
=
To deactivate Scroll Display, choose MENU ( 25) > [
] tab
> [Scroll Display] > [Off].
To have the most recent shot displayed when you enter Playback
=
mode, choose MENU ( 25) > [
] tab > [Resume] > [Last
Camera Basics
shot].
1
2
3
4
5
6
7
8
9
●
To change the transition shown between images, access MENU
Play movies.
3
=
(
25) and choose your desired effect on the [
] tab >
Auto Mode
[Transition].
● To start playback, press the [ ] button,
press the [ ][ ] buttons to choose [ ],
and then press the [ ] button again.
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Adjust the volume.
4
● Press the [ ][ ] buttons to adjust the
volume.
● To adjust the volume when the volume
indicator (1) is no longer displayed, press
the [ ][ ] buttons.
( )
1
Pause playback.
5
● To pause or resume playback, press the
] button.
Index
[
● After the movie is finished, [
] is
displayed.
62
Histogram
Before Use
Switching Display Modes
Still Images
Movies
Basic Guide
Advanced Guide
Still Images
Movies
● The graph in detailed information display
=
(
63) is a histogram showing the
Press the [ ] button to view other information on the screen, or to hide
the information. For details on the information displayed, see “Playback
distribution of brightness in the image.
The horizontal axis represents the degree
of brightness, and the vertical axis, how
much of the image is at each level of
brightness. Viewing the histogram is a
way to check exposure.
=
(Detailed Information Display)” ( 133).
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
No Information Display
Other Shooting Modes
P Mode
GPS Information Display
Still Images
Movies
● Using a smartphone connected to the
camera via Wi-Fi, you can geotag images
on the camera, adding information such
as latitude, longitude, and elevation
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Simple Information Display
Detailed Information Display
=
(
102). You can review this information
in the GPS information display.
● Latitude, longitude, elevation, and UTC
(shooting date and time) are listed from
top to bottom.
●
●
GPS information display is not available for images that lack this
information.
Index
[---] is shown instead of numerical values for items not available
on your smartphone or items not recorded correctly.
Overexposure Warning (for Image Highlights)
Still Images
●
UTC: Coordinated Universal Time, essentially the same as
Greenwich Mean Time.
Movies
Washed-out highlights in the image flash on the screen in detailed
=
information display ( 63).
63
Before Use
Finding Images Matching Specified Conditions
Browsing and Filtering Images
Basic Guide
Advanced Guide
Still Images
Movies
Find desired images quickly on a memory card full of images by filtering
image display according to your specified conditions. You can also protect
Navigating through Images in an Index
=
=
(
67) or delete ( 70) these images all at once.
Camera Basics
1
2
3
4
5
6
7
8
9
Still Images
Movies
Displays images with detected faces.
People
By displaying multiple images in an index, you can quickly find the images
Displays the images shot on a specific date.
Auto Mode
Shot Date
Favorites
Still image/
you are looking for.
=
Displays images tagged as favorites ( 72).
Other Shooting Modes
P Mode
Display images in an index.
1
Displays only still images or movies.
Movie
● Move the zoom lever toward [ ] to
display images in an index. Moving the
lever again will increase the number of
images shown.
Choose a search condition.
1
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [ ] button, choose [ ] in the
● To display fewer images, move the zoom
lever toward [ ]. Fewer images are
shown each time you move the lever.
=
menu, and choose a condition ( 24).
● When you have selected [ ] or [ ],
choose the condition by pressing the
[
][ ][ ][ ] buttons on the screen
Choose an image.
2
displayed, and then press the [ ] button.
● Press the [ ][ ][ ][ ] buttons to choose
an image.
View the filtered images.
2
● An orange frame is displayed around the
● Images matching your conditions are
displayed in yellow frames. To view only
these images, press the [ ][ ] buttons.
selected image.
Index
● Press the [ ] button to view the selected
image in single-image display.
● To cancel filtered display, choose [ ] in
step 1.
●
When the camera has found no corresponding images for some
conditions, those conditions will not be available.
64
Before Use
●
●
To hide or view other information, press the [ ] button in step 2.
Options for viewing the images found (in step 2) include
Image Viewing Options
Basic Guide
Advanced Guide
=
“Navigating through Images in an Index” ( 64), “Magnifying
=
=
Images” ( 65), and “Viewing Slideshows” ( 66). You can
also apply image operations to all images found, by choosing
Magnifying Images
=
[Protect All Images] in “Protecting Images” ( 67) or [Select All
Camera Basics
=
Images] in “Erasing Multiple Images at Once” ( 70), “Adding
1
2
3
4
5
6
7
8
9
Still Images
Movies
=
Images to the Print List (DPOF)” ( 123), or “Adding Images to
=
a Photobook” ( 125).
If you edit images and save them as new images ( 73 –
Auto Mode
Magnify an image.
1
=
●
=
77), a message is displayed, and the images that were
found are no longer shown.
● Moving the zoom lever toward [ ] will
Other Shooting Modes
P Mode
zoom in and magnify the image, and
[
] is displayed. You can magnify
images up to about 10x by continuing to
hold the zoom lever.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● The approximate position of the displayed
area (1) is shown for reference.
● To zoom out, move the zoom lever
toward [ ]. You can return to single-
image display by continuing to hold it.
Move the display position and
switch images as needed.
2
( )
1
● To move the display position, press the
[
][ ][ ][ ] buttons.
Index
● While [
to [
] is displayed, you can switch
] by pressing the [ ] button. To
switch to other images while zoomed,
press the [ ][ ] buttons. Press the
[
] button again to restore the original
setting.
●
You can return to single-image display from magnified display by
pressing the [ ] button.
65
Configure the settings.
2
Before Use
Viewing Slideshows
● Choose a menu item to configure, and
Basic Guide
Advanced Guide
=
then choose the desired option ( 25).
Still Images
Movies
● To start the slideshow with your settings,
choose [Start] and press the [ ] button.
Automatically play back images from a memory card as follows. Each
image is displayed for about three seconds.
● To return to the menu screen, press the
● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
Camera Basics
1
2
3
4
5
6
7
8
9
[
] button.
=
(
24).
Auto Mode
●
[Play Time] cannot be modified when [Bubble] is chosen in
● The slideshow will start after [Loading
image] is displayed for a few seconds.
[Effect].
Other Shooting Modes
P Mode
● Press the [
slideshow.
] button to stop the
Auto Playback of Related Images (Smart Shuffle)
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
●
The camera’s power-saving functions ( 23) are deactivated
Still Images
Movies
during slideshows.
Based on the current image, the camera offers four images that you may
wish to view. After you choose to view one of those images, the camera
offers four more images. This is an enjoyable way to play back images in
an unexpected order. Try this feature after you have taken many shots, in
many kinds of scenes.
●
●
To pause or resume slideshows, press the [ ] button.
You can switch to other images during playback by pressing the
[
][ ] buttons. For fast-forward or fast-rewind, hold the [ ][
]
buttons down.
Choose Smart Shuffle.
1
=
●
In filtered display ( 64), only images matching search
● Press the [ ] button, and then choose
conditions are played.
=
[
] in the menu ( 24).
Index
● Four candidate images are displayed.
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions
between images and the display duration of each image.
Access the setting screen.
1
● Press the [
] button, and then
choose [Slideshow] on the [ ] tab
=
(
25).
66
Choose an image.
2
Before Use
Protecting Images
● Press the [ ][ ][ ][ ] buttons to choose
the image you want to view next.
Basic Guide
Advanced Guide
Still Images
Movies
● Your chosen image is displayed in the
center, surrounded by the next four
candidate images.
=
Protect important images to prevent accidental erasure ( 70).
● Press the [ ] button, and then choose
Camera Basics
=
[
] in the menu ( 24). [Protected]
1
2
3
4
5
6
7
8
9
● For full-screen display of the center
image, press the [ ] button. To restore
the original display, press the [ ] button
again.
is displayed.
Auto Mode
● To untag the image, repeat this process
and choose [
the [ ] button.
] again, and then press
Other Shooting Modes
P Mode
● Press the [
] button to restore
single-image display.
●
Smart Shuffle is not available in the following cases:
- There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
●
●
Protected images on a memory card will be erased if you format
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
=
110).
the card ( 109,
=
- Images are shown in filtered display ( 64)
Protected images cannot be erased using the camera’s erasure
function. To erase them this way, first cancel protection.
Index
67
Protect the images.
3
Before Use
Using the Menu
● Press the [
] button. A confirmation
Basic Guide
Advanced Guide
message is displayed.
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Access the setting screen.
1
● Press the [
] button and choose
=
[Protect] on the [
] tab ( 25).
Camera Basics
1
2
3
4
5
6
7
8
9
●
Images will not be protected if you switch to Shooting mode or
Auto Mode
turn the camera off before finishing the setup process in step 3.
Other Shooting Modes
P Mode
Choose a selection method.
2
Selecting a Range
● Choose a menu item and an option as
=
desired ( 25).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● To return to the menu screen, press the
Choose [Select Range].
1
[
] button.
● Following step 2 in “Using the Menu”
=
(
68), choose [Select Range] and
press the [ ] button.
Choosing Images Individually
Choose a starting image.
2
● Press the [ ] button.
Choose [Select].
1
● Following step 2 in “Using the Menu”
Index
=
(
[
68), choose [Select] and press the
] button.
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Choose an image.
2
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[
] is displayed.
● To untag the image, press the [ ] button
again. [ ] is no longer displayed.
● Repeat this process to specify other
images.
68
Choose an ending image.
3
Before Use
Protecting All Images at Once
● Press the [ ] button to choose [Last
Basic Guide
Advanced Guide
image], and then press the [ ] button.
Choose [Protect All Images].
1
● Following step 2 in “Using the Menu”
=
(
68), choose [Protect All Images]
Camera Basics
1
2
3
4
5
6
7
8
9
and press the [ ] button.
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Auto Mode
Protect the images.
2
● Images before the first image cannot be
selected as the last image.
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Protect the images.
4
● Press the [ ] button to choose [Protect],
Clearing All Protection at Once
and then press the [ ] button.
You can clear protection from all images at once.
To clear protection, choose [Unprotect All Images] in step 1 of “Protecting
All Images at Once”, and then complete step 2.
●
To cancel protection for groups of images, choose [Unlock] in
step 4.
Index
69
Choose a selection method.
2
Before Use
Erasing Images
● Press the [ ][ ] buttons to choose a
selection method, and then press the [
button.
Basic Guide
Advanced Guide
]
Still Images
Movies
You can choose and erase unneeded images one by one. Be careful
when erasing images, because they cannot be recovered. However,
● To return to the menu screen, press the
[
] button.
=
protected images ( 67) cannot be erased.
Camera Basics
1
2
3
4
5
6
7
8
9
Choose an image to erase.
Choosing Images Individually
1
Auto Mode
● Press the [ ][ ] buttons to choose an
image.
Choose [Select].
Other Shooting Modes
P Mode
1
● Following step 2 in “Choosing a Selection
Erase the image.
2
=
Method” ( 70), choose [Select] and
● Press the [ ] button.
press the [ ] button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● After [Erase?] is displayed, press the
Choose an image.
2
[
][ ] buttons to choose [Erase], and
then press the [ ] button.
● Once you choose an image following
step 2 in “Choosing Images Individually”
● The current image is now erased.
● To cancel erasure, press the [ ][
=
(
68), [ ] is displayed.
]
● To untag the image, press the [ ] button
again. [ ] is no longer displayed.
buttons to choose [Cancel], and then
press the [ ] button.
● Repeat this process to specify other
images.
Erasing Multiple Images at Once
Erase the image.
Index
3
You can choose multiple images to erase at once. Be careful when
erasing images, because they cannot be recovered. However, protected
● Press the [
] button. A confirmation
message is displayed.
=
images ( 67) cannot be erased.
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Choosing a Selection Method
Access the setting screen.
1
● Press the [
] button, and then
=
choose [Erase] on the [
] tab ( 25).
70
Selecting a Range
Before Use
Rotating Images
Basic Guide
Advanced Guide
Choose [Select Range].
1
Still Images
Movies
● Following step 2 in “Choosing a Selection
Change the orientation of images and save them as follows.
=
Method” ( 70), choose [Select
Range] and press the [ ] button.
Choose [ ].
1
Camera Basics
1
2
3
4
5
6
7
8
9
Choose images.
● Press the [ ] button, and then choose
2
=
Auto Mode
[
] in the menu ( 24).
● Follow steps 2 – 3 in “Selecting a Range”
=
(
68) to specify images.
Other Shooting Modes
P Mode
Erase the image.
3
● Press the [ ] button to choose [Erase],
and then press the [ ] button.
Rotate the image.
2
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [ ] or [ ] button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the [ ] button to complete the
setting.
Specifying All Images at Once
Choose [Select All Images].
1
Using the Menu
● Following step 2 in “Choosing a Selection
=
Method” ( 70), choose [Select All
Index
Choose [Rotate].
Images] and press the [ ] button.
1
● Press the [
[Rotate] on the [
] button and choose
Erase the image.
2
=
] tab ( 25).
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
71
Rotate the image.
2
Before Use
Tagging Images as Favorites
● Press the [ ][ ] buttons to choose an
image.
Basic Guide
Advanced Guide
Still Images
Movies
● The image is rotated 90° each time you
press the [ ] button.
You can organize images by tagging them as favorites. By choosing a
category in filtered playback, you can restrict the following operations to
all of those images.
● To return to the menu screen, press the
Camera Basics
1
2
3
4
5
6
7
8
9
[
] button.
=
=
● “Viewing” ( 61), “Viewing Slideshows” ( 66), “Protecting
=
=
Images” ( 67), “Erasing Images” ( 70), “Adding Images to
Auto Mode
●
Rotation is not possible when [Auto Rotate] is set to [Off]
=
the Print List (DPOF)” ( 123), “Adding Images to a Photobook”
=
(
72).
=
(
125)
Other Shooting Modes
P Mode
● Press the [ ] button, and then choose
=
[
] in the menu ( 24).
Deactivating Auto Rotation
● [Tagged as Favorite] is displayed.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● To untag the image, repeat this process
and choose [ ] again, and then press
the [ ] button.
Follow these steps to deactivate automatic image rotation, which rotates
images based on the current camera orientation.
● Press the [
Rotate] on the [
] button, choose [Auto
] tab, and then choose
=
[Off] ( 25).
Using the Menu
Choose [Favorites].
1
● Press the [
] button and choose
Index
=
[Favorites] on the [
] tab ( 25).
=
●
●
Images cannot be rotated ( 71) when you set [Auto Rotate]
to [Off]. Additionally, images already rotated will be displayed in
the original orientation.
=
In Smart Shuffle ( 66) mode, even if [Auto Rotate] is set
to [Off], images shot vertically will be displayed vertically, and
rotated images will be displayed in the rotated orientation.
72
Choose an image.
2
Before Use
Editing Still Images
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Basic Guide
Advanced Guide
[
] is displayed.
=
=
76) is only available when the
● To untag the image, press the [ ] button
●
Image editing ( 73 –
again. [ ] is no longer displayed.
memory card has sufficient free space.
Camera Basics
1
2
3
4
5
6
7
8
9
● Repeat this process to choose additional
images.
Auto Mode
Resizing Images
Configure the setting.
3
Other Shooting Modes
P Mode
● Press the [
] button. A confirmation
Still Images
Movies
message is displayed.
Save a copy of images at a lower number of resolution.
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Choose [Resize].
1
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [
[Resize] on the [
] button and choose
=
] tab ( 25).
●
Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 3.
Choose an image.
2
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Choose an image size.
3
● Press the [ ][ ] buttons to choose the
size, and then press the [ ] button.
Index
● [Save new image?] is displayed.
Save the new image.
4
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
● The image is now saved as a new file.
73
Review the new image.
( )
1
( )
2
( )
3
Adjust the cropping area.
5
3
Before Use
● Press the [
] button. [Display new
● A frame is displayed around the portion of
Basic Guide
Advanced Guide
image?] is displayed.
the image to be cropped (1).
● Press the [ ][ ] buttons to choose [Yes],
and then press the [ ] button.
● The original image is shown in the upper
left, and a preview of the image as
cropped (2) is shown in the lower right.
You can also see the resolution after
cropping (3).
● The saved image is now displayed.
Camera Basics
1
2
3
4
5
6
7
8
9
●
●
Editing is not possible for images shot at a resolution of [
]
Auto Mode
● To resize the frame, move the zoom
lever.
=
(
37).
Other Shooting Modes
P Mode
● To move the frame, press the
[
][ ][ ][ ] buttons.
Images cannot be resized to a higher resolution.
● To change the frame orientation, press
the [ ] button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [
] button.
Cropping
Save as a new image and review.
4
Still Images
Movies
● Follow steps 4 – 5 in “Resizing Images”
=
(
73).
You can specify a portion of an image to save as a separate image file.
Choose [Cropping].
1
●
Editing is not possible for images shot at a resolution of [
]
=
(
=
37) or resized to [ ] ( 73).
● Press the [
choose [Cropping] on the [
] button, and then
] tab
=
(
25).
Index
●
●
Images supported for cropping will have the same aspect ratio
Choose an image.
2
after cropping.
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Cropped images will have a lower resolution than uncropped
images.
74
Before Use
Changing Image Color Tones (My Colors)
Correcting Image Brightness (i-Contrast)
Basic Guide
Advanced Guide
Still Images
You can adjust image colors and then save the edited image as a
separate file. For details on each option, see “Changing Image Color
Movies
Still Images
Movies
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufficient
overall image contrast is also automatically corrected, to make subjects
stand out better. Choose from four correction levels, and then save the
image as a separate file.
=
Tones (My Colors)” ( 52).
Camera Basics
1
2
3
4
5
6
7
8
9
Choose [My Colors].
1
Auto Mode
● Press the [
] button, and then
] tab
Choose [i-Contrast].
1
choose [My Colors] on the [
Other Shooting Modes
P Mode
=
(
25).
● Press the [
] button, and then
choose [i-Contrast] on the [
] tab
Choose an image.
=
(
25).
2
● Press the [ ][ ] buttons to choose an
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Choose an image.
2
image, and then press the [ ] button.
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Choose an option.
3
● Press the [ ][ ] buttons to choose an
Choose an option.
3
option, and then press the [ ] button.
● Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
Save as a new image and review.
4
● Follow steps 4 – 5 in “Resizing Images”
Save as a new image and review.
4
=
(
73).
● Follow steps 4 – 5 in “Resizing Images”
Index
=
(
73).
●
●
Image quality of pictures you repeatedly edit this way will be
a little lower each time, and you may not be able to obtain the
desired color.
●
●
For some images, correction may be inaccurate or may cause
images to appear grainy.
Images may look grainy after repeated editing using this function.
The color of images edited using this function may vary slightly
=
from the color of images shot using My Colors ( 52).
●
If [Auto] does not produce the expected results, try correcting
images using [Low], [Medium], or [High].
75
Before Use
Correcting Red-Eye
●
●
Some images may not be corrected accurately.
To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be
erased.
Basic Guide
Advanced Guide
Still Images
Movies
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
●
Protected images cannot be overwritten.
Camera Basics
1
2
3
4
5
6
7
8
9
Choose [Red-Eye Correction].
1
● Press the [
] button, and then
Auto Mode
choose [Red-Eye Correction] on the [
=
tab ( 25).
]
Other Shooting Modes
P Mode
Choose an image.
2
● Press the [ ][ ] buttons to choose an
image.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Correct the image.
3
● Press the [ ] button.
● Red-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
● Enlarge or reduce images as needed.
Follow the steps in “Magnifying Images”
=
(
65).
Index
Save as a new image and review.
4
● Press the [ ][ ][ ][ ] buttons to choose
[New File], and then press the [ ] button.
● The image is now saved as a new file.
● Follow step 5 in “Resizing Images”
=
(
73).
76
Review the edited movie.
3
Before Use
Editing Movies
● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button. The edited
movie is now played.
Basic Guide
Advanced Guide
Still Images
Movies
You can remove unneeded portions from the beginning and end of
movies.
● To edit the movie again, repeat step 2.
● To cancel editing, press the [ ][
]
Camera Basics
1
2
3
4
5
6
7
8
9
buttons to choose [ ]. Press the [
]
Choose [ ].
1
button, press the [ ][ ] buttons to choose
[OK], and then press the [ ] button
again.
Auto Mode
● Following steps 1 – 5 in “Viewing”
=
(
61), choose [ ] and press the [
]
button.
Other Shooting Modes
P Mode
Save the edited movie.
4
● The movie editing panel and editing bar
are now displayed.
● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
( )
1
Specify portions to cut.
2
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [ ][ ][ ][ ] buttons to choose
[New File], and then press the [ ] button.
● (1) is the movie editing panel, and (2) is
the editing bar.
● The movie is now saved as a new file.
● Press the [ ][ ] buttons to choose [
or [ ].
]
●
To overwrite the original movie with the cut one, choose
● To view the portions you can cut
(identified by [ ] on the screen), press
the [ ][ ] buttons to move [ ]. Cut the
beginning of the movie (from [ ]) by
choosing [ ], and cut the end of the
movie by choosing [ ].
[Overwrite] in step 4. In this case, the original movie will be
erased.
●
●
●
If the memory card lacks sufficient space, only [Overwrite] will be
available.
( )
2
Movies may not be saved if the battery pack runs out while saving
is in progress.
Index
When editing movies, you should use a fully charged battery
pack.
● If you move [ ] to a position other than a
[
] mark, in [ ] the portion before the
nearest [ ] mark on the left will be cut,
while in [ ] the portion after the nearest
[
] mark on the right will be cut.
77
Before Use
Available Wi-Fi Features
Basic Guide
Advanced Guide
You can send and receive images and control the camera remotely by
connecting it to these devices and services via Wi-Fi.
6
● Smartphones and Tablets
Send images to smartphones and tablet computers that have Wi-Fi
functions. You can also shoot remotely and geotag your shots from a
smartphone or tablet.
For convenience in this manual, smartphones, tablets, and other
compatible devices are collectively referred to as “smartphones”.
Camera Basics
1
2
3
4
5
6
7
8
9
Wi-Fi Functions
Send images wirelessly from the camera to a variety of compatible
devices, and use the camera with Web services
Auto Mode
Other Shooting Modes
P Mode
● Computer
Use software to save camera images to a computer connected via Wi-Fi.
● Web Services
●
Before using Wi-Fi, be sure to read “Wi-Fi (Wireless LAN)
Add your account information to the camera for CANON iMAGE
GATEWAY online photography service or other Web services to
send camera images to the services. Unsent images on the camera
can also be sent to a computer or Web service via CANON iMAGE
GATEWAY.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
Precautions” ( 147).
● Printers
Send images wirelessly to a PictBridge-compatible printer (supporting
DPS over IP) to print them.
● Another Camera
Send images wirelessly between Wi-Fi compatible Canon cameras.
Index
78
Before Use
Sending Images to an NFC-Compatible
Smartphone
Sending Images to a Smartphone
Basic Guide
Advanced Guide
There are several ways to connect the camera to a smartphone and send
images.
Using an NFC-compatible Android smartphone (OS version 4.0 or later)
simplifies the process of installing Camera Connect and connecting the
devices via NFC.
=
● Connect via NFC ( 79)
Simply touch an NFC-compatible Android smartphone (OS version 4.0
or later) against the camera to connect the devices
Camera Basics
1
2
3
4
5
6
7
8
9
Operation once the devices are connected via NFC varies depending on
the camera mode when the devices are touched together.
Auto Mode
=
● Use the Wi-Fi menu to connect ( 82)
● If the camera is off or in Shooting mode when the devices are touched
together, you can choose and send images on the image selection
screen. Once the devices are connected, you can also shoot remotely
You can connect the camera to a smartphone as you would connect it
to a computer or other device. Multiple smartphones can be added.
Other Shooting Modes
P Mode
=
and geotag your shots ( 102). It’s easy to reconnect to recent
Before connecting to the camera, you must install the free dedicated
Camera Connect app on the smartphone. For details on this application
(supported smartphones and included functions), refer to the Canon
website.
devices, which are listed in the Wi-Fi menu.
● When you touch the smartphone in Playback mode, the screen with
a list of images that you can choose to send is displayed. Choose an
image to send it.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
If you own a Wi-Fi compatible Canon camera and your camera
and smartphone are connected to Wi-Fi, it is recommended
that you change the app that you use on your smartphone from
“CameraWindow” to “Camera Connect”.
Follow the instructions in the following section for NFC-initiated connection
to a camera that is off or in Shooting mode.
Connecting via NFC When Camera Is Off or in
Shooting Mode
Install Camera Connect.
1
Index
● Activate NFC on the smartphone and
touch the device against the camera’s
N-Mark ( ) to start Google Play on
the smartphone automatically. Once
the Camera Connect download page is
displayed, download and install the app.
79
Establish the connection.
Send images.
2
4
Before Use
● Make sure the camera is off or in
● Press the [ ][ ][ ][ ] buttons to choose
Basic Guide
Advanced Guide
Shooting mode.
[Select and send], and then press the [
button.
]
● Touch the N-Mark ( ) on the smartphone
with Camera Connect installed against
the camera’s N-Mark.
● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
Camera Basics
1
2
3
4
5
6
7
8
9
● The camera starts up automatically.
● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
● After the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [
button.
Auto Mode
the [
] button.
]
Other Shooting Modes
P Mode
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
● Camera Connect is started on the
smartphone.
● The devices are connected automatically.
● To end the connection, press the
[
] button, press the [ ][ ] buttons
on the confirmation screen to choose
[OK], and then press the [ ] button. You
can also use the smartphone to end the
connection.
Adjust the privacy setting.
3
● After this screen is displayed, press the
][ ] buttons to choose [Yes], and then
[
press the [ ] button.
Index
● You can now use the smartphone to
browse, import, or geotag images on the
camera or shoot remotely.
80
Connecting via NFC When Camera Is in Playback
Mode
Before Use
●
When using NFC, keep the following points in mind.
- Avoid strong impact between the camera and smartphone. This
may damage the devices.
Basic Guide
Advanced Guide
● Press the [
] button to turn the camera
- Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
together in slightly different positions. If connection is not
established, keep the devices together until the camera screen
is updated.
on.
● Touch the N-Mark ( ) on the smartphone
=
(
79) with Camera Connect installed
Camera Basics
1
2
3
4
5
6
7
8
9
against the camera’s N-Mark.
● Press the [ ][ ][ ][ ] buttons to choose
an image to send, and then press the [
button. [ ] is displayed.
- If you try to connect while the camera is off, a message will be
displayed on your smartphone to ask you to turn the camera on.
Touch and try again after the camera is turned on.
- Do not place other objects between the camera and
smartphone. Also, note that camera or smartphone covers or
similar accessories may block communication.
Auto Mode
]
Other Shooting Modes
P Mode
● To untag the image, press the [ ] button
again. [ ] is no longer displayed.
● Repeat this process to choose additional
images.
●
●
All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 3. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 3.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● After you finish choosing images, press
the [
] button.
Once you have registered a smartphone, you can change privacy
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
=
settings for it on the camera ( 103).
● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
●
●
Connections require that a memory card be in the camera.
You can change the nickname of the camera displayed on the
● The images are sent.
=
screen of step 2 ( 80).
●
If a message is displayed on the camera and requests you to
enter the nickname during connection, follow step 2 in “Sending
●
●
●
●
Not all NFC-compatible smartphones have an N-Mark ( ). For
details, refer to the smartphone user manual.
Index
=
Images to an NFC-Compatible Smartphone” ( 79) to enter it.
You can also send multiple images at once and change the image
●
●
The camera does not keep a record of smartphones you connect
to via NFC in Playback mode.
=
size before sending ( 97).
You can send the current image by choosing [Send this image] on
the screen in step 4.
=
You can preset images to transfer at your desired size ( 97).
=
To disable NFC connections, choose MENU ( 25) > [ ] tab
> [Wireless settings] > [Wi-Fi Settings] > [NFC] > [Off].
81
Choose [Add a Device].
4
Before Use
Adding a Smartphone
● Press the [ ][ ] buttons to choose [Add
Basic Guide
Advanced Guide
a Device], and then press the [ ] button.
These steps show how to use the camera as an access point, but you can
=
also use an existing access point ( 84).
Install Camera Connect.
1
Camera Basics
1
2
3
4
5
6
7
8
9
● For an iPhone and iPad, find Camera
Connect in the App Store and download
and install the app.
● The camera’s SSID and password are
displayed.
Auto Mode
● For Android smartphones, find Camera
Connect in Google Play and download
and install the app.
Other Shooting Modes
P Mode
Access the Wi-Fi menu.
2
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Connect the smartphone to the
network.
5
● Press the [ ] button.
● If the [Device Nickname] screen is
=
● In the smartphone’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
displayed, choose [OK] ( 80).
Choose [ ].
3
● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
● In the password field, enter the password
displayed on the camera.
Start Camera Connect.
6
Index
● Start Camera Connect on the
smartphone.
82
Choose the camera to connect.
● To add multiple smartphones, repeat the
above procedure starting from step 1.
7
Before Use
● When the screen for choosing the target
camera is displayed on your smartphone,
choose the camera to pair them.
Basic Guide
Advanced Guide
●
●
All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 8. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 8.
Adjust the privacy setting.
8
Camera Basics
● Press the [ ][ ] buttons to choose [Yes],
and then press the [ ] button.
1
2
3
4
5
6
7
8
9
Once you have registered a smartphone, you can change privacy
=
settings for it on the camera ( 103).
Auto Mode
● You can now use the smartphone to
browse, import, or geotag images on the
camera or shoot remotely.
Other Shooting Modes
P Mode
●
●
Connections require that a memory card be in the camera.
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
Send images.
9
● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [
button.
]
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
[
][ ] buttons, and then configure the setting.
●
●
If you prefer not to display recent target devices, choose MENU
=
(
25) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
[Target History] > [Off].
To be able to connect without entering the password in step 5
and to make it so that [Password] does not display on the SSID
the [
] button.
=
display screen (step 4), choose MENU ( 25) > [ ] tab >
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
[Wireless settings] > [Wi-Fi Settings] > [Password] > [Off].
●
●
You can also send multiple images at once and change the image
Index
● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
=
size before sending ( 97).
You can send the current image by choosing [Send this image] on
the screen in step 9.
● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
● To end the connection, press the
[
] button, press the [ ][ ] buttons
on the confirmation screen to choose
[OK], and then press the [ ] button. You
can also use the smartphone to end the
connection.
83
Configure the privacy settings and
send images.
5
Before Use
Using Another Access Point
Basic Guide
Advanced Guide
● Follow steps 8 – 9 in “Adding a
When connecting the camera to a smartphone through the Wi-Fi menu,
you can also use an existing access point.
=
Smartphone” ( 82) to configure the
privacy settings and send images.
Prepare for the connection.
1
Camera Basics
1
2
3
4
5
6
7
8
9
Previous Access Points
● Access the [Waiting to connect] screen
by following steps 1 – 4 in “Adding a
Auto Mode
=
Smartphone” ( 82).
You can reconnect to any previous access points automatically by
following step 4 in “Adding a Smartphone” ( 82).
=
Other Shooting Modes
P Mode
Connect the smartphone to the
access point.
2
3
● To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
● To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in “Using Another Access Point” ( 84) from step 4.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Choose [Switch Network].
=
● Press the [ ][ ] buttons to choose
[Switch Network], and then press the [
button.
]
● A list of detected access points will be
displayed.
Connect to the access point.
4
Index
● For WPS-compatible access points,
connect to the access point and choose
the smartphone as described in steps
5 – 8 in “Using WPS-Compatible Access
=
Points” ( 87).
● For non-WPS access points, follow steps
2 – 4 in “Connecting to Listed Access
=
Points” ( 89) to connect to the
access point and choose the smartphone.
84
Install the software.
2
Before Use
Saving Images to a Computer
● Double-click the downloaded file and
the screen on the left is displayed.
Click [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
Basic Guide
Advanced Guide
Preparing to Register a Computer
Camera Basics
● Installation may take some time,
depending on computer performance and
the Internet connection.
1
2
3
4
5
6
7
8
9
For detailed system requirements, such as about computers that can
connect to the camera and Wi-Fi, and compatibility information, including
support in new operating systems, visit the Canon website.
Auto Mode
● Click [Finish] or [Restart] on the screen
after installation.
Other Shooting Modes
P Mode
●
●
Windows 7 Starter and Home Basic editions are not supported.
Windows 7 N (European version) and KN (South Korean version)
require a separate download and installation of Windows Media
Feature Pack.
●
●
Internet access is required, and any ISP account charges and
access fees must be paid separately.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
For details, check the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
Use the following procedure to uninstall (delete) the software.
►
►
- If using Windows, click the [Start] menu
[All Programs]
Installing the Software
[Canon Utilities], and choose the software that you want to
uninstall.
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
►
- If using Mac OS, click the [Applications] folder
[Canon
Utilities], and then move the folder of the software that you want
to uninstall to the Trash. Empty the Trash.
Download the software.
1
● With a computer connected to the
Internet, access the following website.
Index
Configuring the Computer for a Wi-Fi Connection
http://www.canon.com/icpd/
(Windows Only)
● Choose the country/area where you live,
and then follow the on-screen instructions
to download the software.
On a computer running Windows, configure the following settings before
connecting the camera to the computer wirelessly.
Confirm that the computer is
connected to an access point.
● The software will be downloaded to your
computer in a zipped format.
1
● For instructions on checking your network
connection, refer to the computer user
manual.
85
Configure the setting.
2
Before Use
Saving Images to a Connected Computer
● Click in the following order: [Start] menu
Basic Guide
Advanced Guide
►
►
►
►
[All Programs]
[Canon Utilities]
[Wi-Fi connection
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
[CameraWindow]
setup].
● In the application that opens, follow the
on-screen instructions and configure the
setting.
Confirming Access Point Compatibility
Camera Basics
1
2
3
4
5
6
7
8
9
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
=
standards in “Camera” ( 141).
Auto Mode
Connection methods vary depending on whether the access point
●
The following Windows settings are configured when you run the
utility in step 2.
=
=
supports Wi-Fi Protected Setup (WPS,
non-WPS access points, check the following information.
87) or not ( 89). For
Other Shooting Modes
P Mode
- Turn on media streaming
● Network name (SSID/ESSID)
The SSID or ESSID for the access point you use. Also called the
“access point name” or “network name”.
This will enable the camera to see (find) the computer to access
via Wi-Fi.
- Turn on network discovery
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
This will enable the computer to see (find) the camera.
- Turn on ICMP (Internet Control Message Protocol)
This allows you to check the network connection status.
- Enable Universal Plug & Play (UPnP)
This will enable network devices to detect each other
automatically.
● Network authentication / data encryption (encryption method /
encryption mode)
The method for encrypting data during wireless transmission. Check
which security setting is used: WPA2-PSK (AES), WPA2-PSK
(TKIP), WPA-PSK (AES), WPA-PSK (TKIP), WEP (open system
authentication), or no security.
●
Some security software may prevent you from completing the
settings as described here. Check the settings of your security
software.
● Password (encryption key / network key)
The key used when encrypting data during wireless transmission. Also
called the “encryption key” or “network key”.
● Key index (transmit key)
The key set when WEP is used for network authentication / data
encryption. Use “1” as the setting.
Index
●
●
If system administrator status is needed to adjust network
settings, contact the system administrator for details.
These settings are very important for network security. Exercise
adequate caution when changing these settings.
86
Before Use
● After the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
●
●
For information on WPS compatibility and for instructions on
checking settings, refer to the access point user manual.
A router is a device that creates a network (LAN) structure for
connecting multiple computers. A router that contains an internal
Wi-Fi function is called a “Wi-Fi router”.
choose [OK], and then press the [
button.
]
Basic Guide
Advanced Guide
●
●
This guide refers to all Wi-Fi routers and base stations as “access
points”.
Camera Basics
1
2
3
4
5
6
7
8
9
If you use MAC address filtering on your Wi-Fi network, be sure
to add the camera’s MAC address to your access point. You can
Choose [ ].
3
Auto Mode
● Press the [ ][ ][ ][ ] buttons to choose
], and then press the [ ] button.
=
check your camera’s MAC address by choosing MENU ( 25)
[
> [ ] tab > [Wireless settings] > [Wi-Fi Settings] > [Check MAC
Address].
Other Shooting Modes
P Mode
Using WPS-Compatible Access Points
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Choose [Add a Device].
4
WPS makes it easy to complete settings when connecting devices over
Wi-Fi. You can use either Push Button Configuration Method or PIN
Method for settings on a WPS supported device.
● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
Confirm that the computer is
connected to an access point.
1
● For instructions on checking the
connection, refer to the device and
access point user manuals.
Choose [WPS Connection].
5
● Press the [ ][ ] buttons to choose
[WPS Connection], and then press the
Index
[
] button.
Access the Wi-Fi menu.
2
● Press the [ ] button.
Choose [PBC Method].
6
● Press the [ ][ ] buttons to choose [PBC
Method], and then press the [ ] button.
87
Establish the connection.
Display CameraWindow.
7
10
Before Use
● On the access point, hold down the WPS
connection button for a few seconds.
● Windows: Access CameraWindow by
clicking [Downloads Images From Canon
Camera].
Basic Guide
Advanced Guide
● On the camera, press the [ ] button to
go to the next step.
● Mac OS: CameraWindow is automatically
displayed when a Wi-Fi connection is
established between the camera and
computer.
● The camera connects to the access point
and lists devices connected to it on the
[Select a Device] screen.
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
Import images.
11
Other Shooting Modes
P Mode
● Click [Import Images from Camera], and
then click [Import Untransferred Images].
Choose the target device.
8
● Press the [ ][ ] buttons to choose the
target device name, and then press the
● Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
[
] button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Click [OK] in the screen that is displayed
after image import is complete.
● To look at a image saved on your
computer, use a software (such as one
installed on your computer by default or
general software) that supports images
shot with a camera.
Install a driver (first Windows
connection only).
9
● When this screen is displayed on the
camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
Index
● Double-click the connected camera icon.
● Driver installation will begin.
● After driver installation is complete, and
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
88
Enter the access point password.
3
Before Use
●
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
● Press the [ ] button to access the
keyboard, and then enter the password
Basic Guide
Advanced Guide
=
(
26).
● Press the [ ][ ] buttons to choose
[Next], and then press the [ ] button.
[
][ ] buttons, and then configure the setting.
Camera Basics
If you prefer not to display recent target devices, choose MENU
1
2
3
4
5
6
7
8
9
Choose [Auto].
=
(
25) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
4
[Target History] > [Off].
Auto Mode
● Press the [ ][ ] buttons to choose
[Auto], and then press the [ ] button.
●
●
●
You can change the nickname of the camera displayed on the
=
screen of step 2 ( 87).
Other Shooting Modes
P Mode
● To save images to a connected computer,
follow the procedure from step 8 in
“Using WPS-Compatible Access Points”
When the camera is connected to a computer, the camera screen
is blank.
Mac OS: If CameraWindow is not displayed, click the
[CameraWindow] icon in the Dock.
=
(
87).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
●
To disconnect from the camera, turn off the camera.
If you chose [PIN Method] in step 6, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.
●
●
To determine the access point password, check on the access
point itself or refer to the user manual.
If no access points are detected even after you choose [Refresh]
in step 2 to update the list, choose [Manual Settings] in step 2
to complete access point settings manually. Follow on-screen
instructions and enter an SSID, security settings, and a password.
When you use an access point that you have already connected
to for connecting to another device, [*] is displayed for the
Connecting to Listed Access Points
●
password in step 3. To use the same password, press the [ ][
buttons to choose [Next], and then press the [ ] button.
]
View the listed access points.
1
Index
● View the listed networks (access points)
as described in steps 1 – 4 of “Using
WPS-Compatible Access Points”
=
(
87).
Choose an access point.
2
● Press the [ ][ ] buttons to choose a
network (access point), and then press
the [ ] button.
89
Previous Access Points
Before Use
Sending Images to a Registered
Web Service
You can reconnect to any previous access points automatically by
Basic Guide
Advanced Guide
=
following step 4 in “Using WPS-Compatible Access Points” ( 87).
● To reconnect to the access point, confirm that the target device is
already connected to it, and then follow the procedure from step 8 in
=
“Using WPS-Compatible Access Points” ( 87).
Camera Basics
Registering Web Services
1
2
3
4
5
6
7
8
9
● To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then either follow
the procedure in “Using WPS-Compatible Access Points” ( 87)
from step 5 or the procedure in “Connecting to Listed Access Points”
Auto Mode
Use a smartphone or computer to add to the camera Web services that
you want to use.
=
Other Shooting Modes
P Mode
=
(
89) from step 2.
● A smartphone or computer with a browser and Internet connection is
required to complete camera settings for CANON iMAGE GATEWAY
and other Web services.
● Check the CANON iMAGE GATEWAY website for details on browser
(Microsoft Internet Explorer, etc.) requirements, including settings and
version information.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● For information on countries and regions where CANON iMAGE
GATEWAY is available, visit the Canon website (http://www.canon.
com/cig/).
● You must have an account with Web services other than CANON
iMAGE GATEWAY if you desire to use them. For further details, check
the websites for each Web service you want to register.
● Separate ISP connection and access point fees may be applicable.
Index
●
You can also download the user manual from CANON iMAGE
GATEWAY.
90
Registering CANON iMAGE GATEWAY
Establish a connection with an
access point.
4
Before Use
To link the camera and CANON iMAGE GATEWAY, add CANON iMAGE
GATEWAY as a destination Web service on the camera. By setting
this, an e-mail notification for Camera Web Link Settings will be sent,
so you must use the e-mail address that you use on your computer or
smartphone.
Basic Guide
Advanced Guide
● Connect to the access point as described
in steps 5 – 7 in “Using WPS-Compatible
=
Access Points” ( 87) or in steps 2 – 4
in “Connecting to Listed Access Points”
=
(
89).
Camera Basics
1
2
3
4
5
6
7
8
9
Access the Wi-Fi menu.
1
Enter your e-mail address.
5
● Press the [ ] button.
Auto Mode
● Once the camera is connected to CANON
iMAGE GATEWAY via the access point, a
screen is displayed for entering an e-mail
address.
Other Shooting Modes
P Mode
● After the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [
button.
● Enter your e-mail address, press the
][ ] buttons to choose [Next], and
then press the [ ] button.
]
[
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Enter a four-digit number.
6
● Enter any four-digit number, press the
][ ] buttons to choose [Next], and
then press the [ ] button.
[
Choose [
].
● Press the [ ][ ][ ][ ] buttons to choose
], and then press the [ ] button.
2
● You will need this four-digit number later
when setting up linkage with CANON
iMAGE GATEWAY in step 8.
[
Index
Consent to entering your e-mail
address.
3
● Read the displayed content, press the
][ ] buttons to choose [I Agree], and
then press the [ ] button.
[
91
Confirm the e-mail notification was
sent.
7
Before Use
●
Depending on your e-mail settings on your computer or
smartphone, e-mail from specific domains may be rejected, and
you may not be able to receive the e-mail notification. Please
check your settings ahead of time.
Basic Guide
Advanced Guide
● When information is sent from CANON
iMAGE GATEWAY, an e-mail notification
is sent to the e-mail address you entered
in step 5.
Camera Basics
● The screen notifying you that the e-mail
notification was sent is displayed. Press
the [ ] button.
1
2
3
4
5
6
7
8
9
●
●
You can change the nickname of the camera displayed on the
=
screen of step 1 ( 91).
Auto Mode
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the menu. Press
the [ ][ ] buttons to access the device selection screen and then
configure the setting.
● The [
] icon changes to [
].
Other Shooting Modes
P Mode
Registering Other Web Services
Access the URL in the received
e-mail notification and set the
camera web link.
8
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
You can also add Web services besides CANON iMAGE GATEWAY to the
camera.
● From a computer or smartphone,
access the page linked in the notification
message.
Log in to CANON iMAGE GATEWAY
and access the Camera Web Link
Settings page.
1
● Follow the directions on the Camera
Web Link Settings page to configure
the settings.
● From a computer or smartphone, access
http://www.canon.com/cig/ to visit
CANON iMAGE GATEWAY.
Set CANON iMAGE GATEWAY on
the camera.
9
Index
Configure the Web service you want
to use.
2
● Press the [ ][ ][ ][ ] buttons to choose
● Using your computer or smartphone,
display the Web service settings screen.
[
], and then press the [ ] button.
=
● [ ] ( 99) and CANON iMAGE
GATEWAY are now added as
destinations.
● Follow the instructions displayed on the
screen to set up the Web service.
● You can also add other Web services.
To add other Web services, follow the
procedure in “Registering Other Web
=
Services” ( 92) from step 2.
92
Choose [
].
Send images.
3
3
Before Use
● Press the [ ] button.
● Press the [ ][ ][ ][ ] buttons to choose
Basic Guide
Advanced Guide
[Select and send], and then press the [
button.
]
● Press the [ ][ ][ ][ ] buttons to choose
[
], and then press the [ ] button.
● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
● The Web service settings are now
updated.
Camera Basics
1
2
3
4
5
6
7
8
9
● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
Auto Mode
●
If any configured settings change, follow these steps again to
the [
] button.
update the camera settings.
Other Shooting Modes
P Mode
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
Uploading Images to Web Services
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● When uploading to YouTube, read the
terms of service, choose [I Agree], and
press the [ ] button.
Access the Wi-Fi menu.
1
● Press the [ ] button.
● After the image is sent, [OK] is displayed
on the screen. Press the [ ] button to
return to the playback screen.
Choose the destination.
2
●
●
●
●
Connections require that a memory card with saved images be in
the camera.
● Press the [ ][ ][ ][ ] buttons to choose
the icon of the Web service to connect to,
and then press the [ ] button.
You can also send multiple images at once, resize images, and
Index
=
add comments before sending ( 97).
You can send the current image by choosing [Send this image] on
the screen in step 3.
● If multiple recipients or sharing options
are used with a Web service, choose the
desired item on the [Select Recipient]
screen by pressing the [ ][ ] buttons,
and then press the [ ] button.
To look at images sent to CANON iMAGE GATEWAY from your
smartphone, it is recommended that you use the specialized
application Canon Online Photo Album. For iPhone and iPad,
find Canon Online Photo Album in the App Store and download
and install the app. For Android smartphones, find Canon Online
Photo Album in Google Play and download and install the app.
93
Connect the printer to the network.
4
Before Use
Printing Images Wirelessly from a
Connected Printer
● In the printer’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
Basic Guide
Advanced Guide
Connect the camera to a printer via Wi-Fi to print as follows.
These steps show how to use the camera as an access point, but you can
● In the password field, enter the password
displayed on the camera.
Camera Basics
1
2
3
4
5
6
7
8
9
=
also use an existing access point ( 84).
Choose the printer.
5
Auto Mode
Access the Wi-Fi menu.
1
● Press the [ ][ ] buttons to choose the
printer name, and then press the [
button.
● Press the [ ] button.
Other Shooting Modes
P Mode
]
Choose [ ].
2
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [ ][ ][ ][ ] buttons to choose
], and then press the [ ] button.
Choose an image to print.
6
[
● Press the [ ][ ] buttons to choose an
image.
● Press the [ ] button, choose [ ], and
press the [ ] button again.
Choose [Add a Device].
3
● Press the [ ][ ] buttons to choose
● Press the [ ][ ] buttons to choose [Add
[Print], and then press the [ ] button.
a Device], and then press the [ ] button.
● For detailed printing instructions, see
=
“Printing Images” ( 119).
Index
● To end the connection, press the [
]
button, press the [ ][ ] buttons on the
confirmation screen to choose [OK], and
then press the [ ] button.
● The camera’s SSID and password are
displayed.
94
Before Use
●
●
Connections require that a memory card with saved images be in
the camera.
Sending Images to Another Camera
Basic Guide
Advanced Guide
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
Connect two cameras via Wi-Fi and send images between them as follows.
● Only Canon-brand cameras equipped with a Wi-Fi function can
be connected to wirelessly. You cannot connect to a Canon-brand
camera that does not have a Wi-Fi function, even if it supports
FlashAir/Eye-Fi cards.
Camera Basics
1
2
3
4
5
6
7
8
9
[
][ ] buttons, and then configure the setting.
●
●
If you prefer not to display recent target devices, choose MENU
Auto Mode
Access the Wi-Fi menu.
=
(
1
25) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● Access the Wi-Fi menu as described
Other Shooting Modes
P Mode
To be able to connect without entering the password in step 4
and to make it so that [Password] does not display on the SSID
in step 2 in “Adding a Smartphone”
=
(
82).
=
display screen (step 3), choose MENU ( 25) > [ ] tab >
[Wireless settings] > [Wi-Fi Settings] > [Password] > [Off].
Choose [ ].
2
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
To use another access point, follow steps 3 – 4 in “Using Another
● Press the [ ][ ][ ][ ] buttons to choose
], and then press the [ ] button.
=
Access Point” ( 84).
[
Choose [Add a Device].
3
● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
● Follow steps 1 – 3 on the target camera
Index
too.
● Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
95
Send images.
4
Before Use
●
●
Connections require that a memory card be in the camera.
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [
button.
Basic Guide
Advanced Guide
]
● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
Camera Basics
[
][ ] buttons, and then configure the setting.
1
2
3
4
5
6
7
8
9
● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
●
If you prefer not to display recent target devices, choose MENU
=
(
25) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
Auto Mode
[Target History] > [Off].
the [
] button.
●
●
You can also send multiple images at once and change the image
Other Shooting Modes
P Mode
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
=
size before sending ( 97).
You can send the current image by choosing [Send this image] on
the screen in step 4.
● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
● To end the connection, press the
[
] button, press the [ ][ ] buttons
on the confirmation screen to choose
[OK], and then press the [ ] button.
Index
96
Choose images.
2
Before Use
Image Sending Options
● Follow steps 2 – 3 in “Selecting a Range”
Basic Guide
Advanced Guide
=
(
68) to specify images.
● When sending movies as well, press the
][ ][ ][ ] buttons to choose [Incl.
You can choose multiple images to send at once and change the image
resolution (size) before sending. Some Web services also enable you to
annotate the images you send.
[
Movies], and then press [ ] to add [ ].
Camera Basics
1
2
3
4
5
6
7
8
9
● Press the [ ][ ][ ][ ] buttons to choose
[OK], and then press the [ ] button.
Sending Multiple Images
Auto Mode
Send the image.
3
On the image transfer screen, you can select a range of images to send,
and send images tagged as favorites.
Other Shooting Modes
P Mode
● Press the [ ][ ] buttons to choose
[Send], and then press the [ ] button.
Choose [Select and send].
1
Sending Images Tagged as Favorites
● On the image transfer screen, press the
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
[
][ ] buttons to choose [Select and
=
You can send images tagged as favorites ( 72).
send], and then press the [ ] button.
Choose [Favorite Images].
1
● Following step 2 in “Sending Multiple
=
Images” ( 97), choose [Favorite
Choose a selection method.
2
Images] and press the [ ] button.
● Press the [ ][ ] buttons to choose a
● The image selection screen that displays
only favorite images is displayed. To
make it so that an image is not sent, after
choosing an image, press [ ] to remove
selection method.
Index
[
].
● Press the [
] button.
Selecting a Range
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Choose [Select Range].
1
Send the image.
2
● Following step 2 in “Sending Multiple
● Press the [ ][ ] buttons to choose
[Send], and then press the [ ] button.
=
Images” ( 97), choose [Select
Range] and press the [ ] button.
●
If you have no images tagged as favorite, you cannot choose
[Favorite Images] in step 1.
97
Before Use
Notes on Sending Images
Choosing the Number of Recording Pixels (Image
Size)
Basic Guide
Advanced Guide
● Depending on the condition of the network you are using, it may take
a long time to send movies. Be sure to keep an eye on the camera
battery level.
On the image transfer screen, choose [ ] by pressing the [ ][
]
buttons, and then press the [ ] button. On the screen displayed, choose
the resolution (image size) by pressing the [ ][ ] buttons, and then
press the [ ] button.
● Web services may limit the number of images or length of movies you
can send.
Camera Basics
1
2
3
4
5
6
7
8
9
● To send images at original size, select [No] as the resizing option.
Auto Mode
● When sending movies to smartphones, note that the supported image
quality varies depending on the smartphone. For details, refer to the
smartphone user manual.
● By choosing [ ], you can resize images that are larger than the
selected size before sending.
Other Shooting Modes
P Mode
● On the screen, wireless signal strength is indicated by the following
icons.
● Movies cannot be resized.
[
] high, [ ] medium, [ ] low, [ ] weak
=
●
Image size can also be configured in MENU ( 25) > [ ] tab
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Sending images to Web services will take less time when resending
images you have already sent that are still on the CANON iMAGE
GATEWAY server.
> [Wireless settings] > [Wi-Fi Settings] > [Resize for Sending].
Index
98
Before Use
Adding Comments
Sending Images Automatically
(Image Sync)
Basic Guide
Advanced Guide
Using the camera, you can add comments to images that you send
to e-mail addresses, social networking services, etc. The number of
characters and symbols that can be entered may differ depending on the
Web service.
Images on the memory card that have not been transferred already can
be sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Camera Basics
1
2
3
4
5
6
7
8
9
Access the screen for adding
comments.
1
Auto Mode
Initial Preparations
● On the image transfer screen, choose
Other Shooting Modes
P Mode
[
] by pressing the [ ][ ][ ][ ] buttons,
and then press the [ ] button.
Preparing the Camera
Add a comment (=26).
2
3
Register [ ] as the destination. On the destination computer, install and
set up the Image Sync software “ImageTransfer Utility” (free).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Send the image.
Add [ ] as a destination.
1
● Add [ ] as a destination, as described in
●
●
When a comment is not entered, the comment set in CANON
iMAGE GATEWAY is automatically sent.
“Registering CANON iMAGE GATEWAY”
=
(
91).
You can also annotate multiple images before sending them. The
same comment is added to all images sent together.
● When sending images to the Web
Service as well, log in to CANON iMAGE
=
GATEWAY ( 91). After choosing the
camera model, display the Web Service
settings screen. Under Image Sync
Index
settings, choose the Web service that you
want to send the images to. For details,
see the CANON iMAGE GATEWAY Help.
99
Choose the type of images to send
(only when sending movies with
images).
● Once the camera is registered and the
computer is ready to receive images, the
icon changes to [ ].
2
Before Use
Basic Guide
Advanced Guide
● Press the [
] button, choose
Sending Images
[Wireless settings] on the [ ] tab, and
=
then choose [Wi-Fi Settings] ( 25).
Camera Basics
● Press the [ ][ ] buttons to choose
[Image Sync], and then press the [ ][
buttons to choose [Stills/Movies].
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images
will be stored temporarily on the CANON iMAGE GATEWAY server.
Stored images are regularly erased, so make sure to turn on the computer
and save the images.
1
2
3
4
5
6
7
8
9
]
Auto Mode
Preparing the Computer
Other Shooting Modes
P Mode
Install and configure the software on the destination computer.
Send images.
1
Install Image Transfer Utility.
● Following steps 1 – 2 in “Uploading
1
=
Images to Web Services” ( 93),
choose [ ].
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Install Image Transfer Utility on a
computer connected to the Internet
● Images labeled with a [ ] icon have been
transferred.
=
(
117).
● You can download the Image Transfer
Utility from the CANON iMAGE
GATEWAY Image Sync setting screen
Save the images to the computer.
2
● Images are automatically saved to the
=
(
91).
computer when you turn it on.
Register the camera.
2
● Images are automatically sent to Web
services from the CANON iMAGE
GATEWAY server, even if the computer
is off.
● Windows: In the taskbar, right-click [ ],
Index
and then click [Add new camera].
● Mac OS: In the menu bar, click [ ], and
then click [Add new camera].
●
When sending images, you should use a fully charged battery
pack.
● A list of cameras linked to CANON
iMAGE GATEWAY is displayed. Choose
the camera from which images are to be
sent.
100
Before Use
●
●
Even if images were imported to the computer through a different
method, any images not sent to the computer via CANON iMAGE
GATEWAY will be sent to the computer.
●
●
After a fixed period of time, you will not be able to view images
deleted from CANON iMAGE GATEWAY.
Basic Guide
Advanced Guide
To view sent images, you must first set Image Sync settings so
that you can view and download images on your smartphone.
Sending is faster when the destination is a computer on the same
network as the camera, because images are sent via the access
point instead of CANON iMAGE GATEWAY. Note that images
stored on the computer are sent to CANON iMAGE GATEWAY, so
the computer must be connected to the Internet.
Camera Basics
1
2
3
4
5
6
7
8
9
●
For information on Canon Online Photo Album operations, see
the Canon Online Photo Album Help.
Auto Mode
Other Shooting Modes
P Mode
Viewing Images Sent via Image Sync on Your
Smartphone
When you install Canon Online Photo Album (Canon OPA) on your
smartphone, you can see and download images transferred with Image
Sync and temporarily saved on CANON iMAGE GATEWAY.
The following preparations are required in advance.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● You must finish the setup process for “Preparing the Computer”
=
(
100).
● For iPhone and iPad, find Canon Online Photo Album in the App Store
and download and install the app. For Android smartphones, find
Canon Online Photo Album in Google Play and download and install
the app.
=
● Log in to CANON iMAGE GATEWAY ( 91). After choosing the
camera model, display the Web Service settings screen. Under Image
Sync settings, change the settings so that you can view and download
on your smartphone. For details, see the CANON iMAGE GATEWAY
Help.
Index
101
Before Use
Shooting Remotely
Using a Smartphone to View Camera
Images and Control the Camera
Basic Guide
Advanced Guide
As you check a shooting screen on your smartphone, you can use it to
shoot remotely.
You can do the following with the dedicated smartphone app Camera
Connect.
Secure the camera.
1
Camera Basics
1
2
3
4
5
6
7
8
9
● Once remote shooting begins, the
camera lens will come out. Lens motion
from zooming may also move the camera
out of position. Keep the camera still by
mounting it on a tripod or taking other
measures.
● Browse images on the camera and save them to the smartphone
=
● Geotag images on the camera ( 102)
Auto Mode
=
● Shoot remotely ( 102)
Other Shooting Modes
P Mode
●
Privacy settings must be configured in advance to allow image
=
=
103).
viewing on the smartphone ( 82,
Connect the camera and
smartphone (=82).
2
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● In the privacy settings, choose [Yes].
Geotagging Images on the Camera
Choose remote shooting.
3
GPS data recorded on a smartphone using the dedicated Camera
Connect application can be added to images on the camera. Images are
tagged with information including the latitude, longitude, and elevation.
● In Camera Connect on the smartphone,
choose remote shooting.
● The camera lens will come out. Do not
press near the lens, and make sure no
objects will obstruct it.
●
Before shooting, make sure the date and time and your home
time zone are set correctly, as described in “Setting the Date and
● Once the camera is ready for remote
shooting, a live image from the camera
will be displayed on the smartphone.
=
=
Time” ( 17). Also follow the steps in “World Clock” ( 107)
to specify any shooting destinations in other time zones.
Others may be able to locate or identify you by using location data
in your geotagged still images or movies. Be careful when sharing
these images with others, as when posting images online where
many others can view them.
Index
●
● At this time, a message is displayed on
the camera, and all operations except
pressing the power button are disabled.
Shoot.
4
● Use the smartphone to shoot.
102
Before Use
●
●
The camera works in [ ] mode during remote shooting. However,
some FUNC. and MENU settings you have configured in advance
may be changed automatically.
Editing or Erasing Wi-Fi Settings
Basic Guide
Advanced Guide
Edit or erase Wi-Fi settings as follows.
Movie shooting is not available.
Editing Connection Information
Camera Basics
1
2
3
4
5
6
7
8
9
●
●
●
Any jerky subject motion shown on the smartphone due to the
connection environment will not affect recorded images.
No AF frames are displayed. Capture a test image to check the
focus.
Auto Mode
Access the Wi-Fi menu and choose
a device to edit.
1
Other Shooting Modes
P Mode
Captured images are not transferred to the smartphone. Use the
smartphone to browse and import images from the camera.
● Press the [ ] button.
● Press the [ ][ ][ ][ ] buttons to choose
the icon of a device to edit, and then
press the [ ] button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Choose [Edit a Device].
2
● Press the [ ][ ] buttons to choose [Edit
a Device], and then press the [ ] button.
Choose the device to edit.
3
● Press the [ ][ ] buttons to choose the
Index
device to edit, and then press the [
button.
]
Choose the item to edit.
4
● Press the [ ][ ] buttons to choose
the item to edit, and then press the [
button.
]
● The items you can change depend on the
device or service.
103
Before Use
Connection
Changing the Camera Nickname
Configurable Items
Web
Services
Basic Guide
Advanced Guide
You can change the nickname of the camera displayed on the connected
device.
[Change Device Nickname]
–
O
O
O
O
=
(
104)
[View Settings] ( 82)
[Erase Connection Info] ( 104)
Choose [Wireless settings].
1
–
–
–
–
–
O
O
=
Camera Basics
1
2
3
4
5
6
7
8
9
● Press the [
] button and choose
O
O
O
=
[Wireless settings] on the [ ] tab
Auto Mode
=
(
25).
–
O
: Configurable
: Not configurable
Other Shooting Modes
P Mode
Changing a Device Nickname
You can change the device nickname (display name) that is displayed on
the camera.
Choose [Nickname].
2
● Press the [ ][ ] buttons to choose
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Following step 4 in “Editing Connection
Information” ( 103), choose [Change
[Nickname], and then press the [
button.
]
=
Device Nickname] and press the [
button.
]
● Select the input field and press the [
]
button. Use the keyboard displayed to
Change the device nickname.
3
=
enter a new nickname ( 26).
● Press the [ ] button. Use the keyboard
displayed to enter a new nickname
=
(
26).
Erasing Connection Information
Erase connection information (information about devices that you have
connected to) as follows.
Index
● Following step 4 in “Editing Connection
=
Information” ( 103), choose [Erase
●
●
A message is displayed if the nickname you enter begins with
a symbol or space. Press the [ ] button and enter a different
nickname.
Connection Info] and press the [
button.
]
On the [Device Nickname] screen displayed when using the
Wi-Fi function for the first time, choose the field and press [ ] to
display the keyboard. You can then enter a nickname.
● After [Erase?] is displayed, press the
][ ] buttons to choose [OK], and then
press the [ ] button.
[
● The connection information will be
erased.
104
Before Use
Returning the Wi-Fi Settings to Default
Basic Guide
Advanced Guide
Return the Wi-Fi settings to default if you transfer ownership of the
camera to another person, or dispose of it.
Resetting the Wi-Fi settings will also clear all Web service settings. Be
sure that you want to reset all Wi-Fi settings before using this option.
Camera Basics
1
2
3
4
5
6
7
8
9
Choose [Wireless settings].
1
Auto Mode
● Press the [
] button and choose
[Wireless settings] on the [ ] tab
Other Shooting Modes
P Mode
=
(
25).
Choose [Reset Settings].
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
2
● Press the [ ][ ] buttons to choose
[Reset Settings], and then press the [
button.
]
Restore the default settings.
3
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Index
● The Wi-Fi settings are now reset.
●
To reset other settings (aside from Wi-Fi) to defaults, choose
=
[Reset All] on the [ ] tab ( 112).
105
Before Use
Adjusting Basic Camera Functions
Basic Guide
Advanced Guide
Basic camera functions are configured on the [ ] tab of the MENU
25). Customize commonly used functions as desired, for greater
convenience.
=
(
7
Camera Basics
1
2
3
4
5
6
7
8
9
Silencing Camera Operations
Setting Menu
Customize or adjust basic camera functions for greater convenience
Auto Mode
Silence camera sounds and movies as follows.
Other Shooting Modes
P Mode
● Choose [Mute], and then choose [On].
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
●
Operation can also be silenced by holding down the [ ] button
as you turn the camera on.
=
Sound is not played during movies ( 61) if you mute camera
sounds. To restore sound during movies, press the [ ] button.
Adjust volume with the [ ][ ] buttons, as needed.
Index
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
● Choose [Volume], and then press the [
]
button.
● Choose an item, and then press the
[
][ ] buttons to adjust the volume.
106
Before Use
Hiding Hints and Tips
World Clock
Basic Guide
Advanced Guide
=
Hints and tips are normally shown when you choose FUNC. ( 24) or
To ensure that your shots will have the correct local date and time when
you travel abroad, simply register the destination in advance and switch to
that time zone. This convenient feature eliminates the need to change the
Date/Time setting manually.
=
MENU ( 25) items. If you prefer, you can deactivate this information.
● Choose [Hints & Tips], and then choose
[Off].
Camera Basics
1
2
3
4
5
6
7
8
9
Before using the world clock, be sure to set the date and time and your
=
home time zone, as described in “Setting the Date and Time” ( 17).
Auto Mode
Specify your destination.
1
Other Shooting Modes
P Mode
● Choose [Time Zone], and then press the
[
] button.
● Press the [ ][ ] buttons to choose
World], and then press the [ ] button.
[
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Date and Time
● Press the [ ][ ] buttons to choose the
destination.
Adjust the date and time as follows.
● To set daylight saving time (1 hour
ahead), choose [ ] by pressing the
● Choose [Date/Time], and then press the
[
][ ] buttons, and then choose [ ] by
[
] button.
pressing the [ ][ ] buttons.
● Press the [ ][ ] buttons to choose an
option, and then press the [ ][ ] buttons
to adjust the setting.
● Press the [ ] button.
Switch to the destination time zone.
2
● Press the [ ][ ] buttons to choose
World], and then press the [
button.
● [ ] is now shown on the shooting screen
Index
[
]
=
(
132).
=
●
Adjusting the date or time while in [ ] mode ( 17) will
automatically update your [ Home] time and date.
107
Shoot.
2
Before Use
Lens Retraction Timing
● To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
Basic Guide
Advanced Guide
The lens is normally retracted for safety about one minute after you press
=
the [
] button in Shooting mode ( 22). To have the lens retracted
immediately after you press the [
] button, set the retraction timing to
[0 sec.].
Camera Basics
1
2
3
4
5
6
7
8
9
Power-Saving Adjustment
● Choose [Lens Retraction], and then
choose [0 sec.].
Auto Mode
Adjust the timing of automatic camera and screen deactivation (Auto
Power Down and Display Off, respectively) as needed ( 23).
=
Other Shooting Modes
P Mode
● Choose [Power Saving], and then press
the [ ] button.
● After choosing an item, press the [ ][
buttons to adjust it as needed.
]
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Using Eco Mode
This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce
battery consumption.
●
To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
Configure the setting.
1
● Choose [Eco Mode], and then choose
[On].
●
●
The [Display Off] setting is applied even if you set [Auto Power
Down] to [Off].
Index
● [
] is now shown on the shooting
These power-saving functions are not available when you have
=
screen ( 132).
=
set Eco mode ( 108) to [On].
● The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
108
Before Use
Screen Brightness
Formatting Memory Cards
Basic Guide
Advanced Guide
Adjust screen brightness as follows.
Before using a new memory card or a card formatted in another device,
you should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back
them up.
● Choose [Disp. Brightness], and then
press the [ ][ ] buttons to adjust the
brightness.
Camera Basics
1
2
3
4
5
6
7
8
9
Access the [Format] screen.
Auto Mode
1
● Choose [Format], and then press the [
]
Other Shooting Modes
P Mode
button.
Choose [OK].
2
●
For maximum brightness, press and hold the [ ] button for at
least one second when the shooting screen is displayed or when
in single-image display. (This will override the [Disp. Brightness]
setting on the [ ] tab.) To restore the original brightness, press
and hold the [ ] button again for at least one second or restart
the camera.
● Press the [ ][ ] buttons to choose
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
[Cancel], press the [ ][ ] buttons to
choose [OK], and then press the [
]
button.
Format the memory card.
3
Hiding the Start-Up Screen
● To begin the formatting process, press
the [ ][ ] buttons to choose [OK], and
then press the [ ] button.
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
● When formatting is finished, [Memory
card formatting complete] is displayed.
Press the [ ] button.
Index
● Choose [Start-up Image], and then
choose [Off].
●
Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards,
please be cautious. Take steps to protect personal information if
necessary, as by physically destroying cards.
109
Before Use
File Numbering
●
The total card capacity indicated on the formatting screen may be
less than the advertised capacity.
Basic Guide
Advanced Guide
Your shots are automatically numbered in sequential order (0001 – 9999)
and saved in folders that store up to 2,000 images each. You can change
how the camera assigns file numbers.
Low-Level Formatting
● Choose [File Numbering], and then
choose an option.
Perform low-level formatting in the following cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing
is slower, continuous shooting is slower, or movie recording suddenly
stops. Low-level formatting erases all data on a memory card. Before low-
level formatting, copy images on the memory card to a computer, or take
other steps to back them up.
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
Other Shooting Modes
P Mode
● On the screen in step 2 of “Formatting
=
Memory Cards” ( 109), press the
][ ] buttons to choose [Low Level
Format], and then press the [ ][
Images are numbered consecutively (until the
9999th shot is taken/saved) even if you switch
memory cards.
[
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Continuous
]
buttons to select this option. A [ ] icon is
displayed.
Image numbering is reset to 0001 if you switch
memory cards, or when a new folder is created.
Auto Reset
● Follow steps 2 – 3 in “Formatting Memory
=
Cards” ( 109) to continue with the
formatting process.
●
Regardless of the option selected in this setting, shots may be
numbered consecutively after the last number of existing images
on newly inserted memory cards. To start saving shots from 0001,
●
●
Low-level formatting takes longer than “Formatting Memory
=
Cards” ( 109), because data is erased from all storage regions
=
use an empty (or formatted,
109) memory card.
of the memory card.
Index
You can cancel low-level formatting in progress by choosing
[Stop]. In this case, all data will be erased, but the memory card
can be used normally.
110
Before Use
Date-Based Image Storage
Checking Certification Logos
Basic Guide
Advanced Guide
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
Some logos for certification requirements met by the camera can be
viewed on the screen. Other certification logos are printed in this guide, on
the camera packaging, or on the camera body.
● Choose [Create Folder], and then choose
[Daily].
● Choose [Certification Logo Display], and
then press the [ ] button.
Camera Basics
1
2
3
4
5
6
7
8
9
● Images will now be saved in folders
created on the shooting date.
Auto Mode
Other Shooting Modes
P Mode
Metric / Non-Metric Display
Display Language
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Change the unit of measurement shown in GPS elevation information
Change the display language as needed.
=
=
(
102), zoom bar ( 28), and elsewhere from m/cm to ft/in as
● Choose [Language ], and then press
the [ ] button.
needed.
● Choose [Units], and then choose [ft/in].
● Press the [ ][ ][ ][ ] buttons to choose
a language, and then press the [
]
button.
Index
●
You can also access the [Language] screen in Playback mode by
pressing and holding the [ ] button and immediately pressing
the [
] button.
Adjusting Other Settings
The following settings can also be adjusted on the [ ] tab.
=
● [Video System] ( 116)
=
● [Wireless settings] ( 78)
111
Before Use
Restoring Defaults
Basic Guide
Advanced Guide
If you accidentally change a setting, you can restore default camera
settings.
Access the [Reset All] screen.
1
Camera Basics
1
2
3
4
5
6
7
8
9
● Choose [Reset All], and then press the
[
] button.
Auto Mode
Restore default settings.
2
Other Shooting Modes
P Mode
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
● Default settings are now restored.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
The following functions are not restored to default settings.
=
=
- [ ] tab settings [Date/Time] ( 107), [Time Zone] ( 107),
=
=
[Language
] ( 111), and [Video System] ( 116)
=
- Custom white balance data you have recorded ( 52)
=
- Shooting mode ( 43)
Index
112
Before Use
System Map
Basic Guide
Advanced Guide
Included Accessories
8
Camera Basics
1
2
3
4
5
6
7
8
9
Battery Pack
NB-11LH*1
Battery Charger
Lens Cap
(with Cord)
Wrist Strap
CB-2LF/CB-2LFE*1
Accessories
Enjoy the camera in more ways with optional Canon accessories and
other compatible accessories sold separately
Auto Mode
Other Shooting Modes
P Mode
USB Cable (camera end: Mini-B)*2
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Memory Card
Card Reader
Computer
Cables
Flash
AV Cable AVC-DC400
TV/Video
System
PictBridge-Compatible
Printers
Index
High-Power Flash
HF-DC2
Connect Station
CS100*3
*1 Also available for purchase separately.
*2 A genuine Canon accessory is also available (Interface Cable IFC-400PCU).
*3 Use the latest firmware.
113
Before Use
Use of genuine Canon accessories is recommended.
Optional Accessories
This product is designed to achieve excellent performance when used
with genuine Canon accessories.
Basic Guide
Advanced Guide
The following camera accessories are sold separately. Note that some
accessories may no longer be available. Also, availability varies by area.
Canon shall not be liable for any damage to this product and/or accidents
such as fi re, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please
note that this warranty does not apply to repairs arising out of the
malfunction of non-genuine Canon accessories, although you may request
such repairs on a chargeable basis.
Camera Basics
Power Supplies
1
2
3
4
5
6
7
8
9
Auto Mode
Battery Pack NB-11LH
Other Shooting Modes
P Mode
● Rechargeable lithium-ion battery.
Battery Charger CB-2LF/CB-2LFE
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Charger for battery pack NB-11LH.
●
The battery pack includes a convenient cover which you can
attach to know the charge status at a glance. Attach the cover so
that
is visible on a charged battery pack, and attach it so that
is not visible on an uncharged battery pack.
Battery Pack NB-11L is also supported.
●
●
Battery Charger CB-2LD and CB-2LDE are also supported.
Index
●
●
The battery charger can be used in areas with 100 – 240 V AC
power (50/60 Hz).
For power outlets in a different format, use a commercially
available adapter for the plug. Never use an electrical transformer
designed for traveling, which may damage the battery pack.
114
Before Use
Flash Unit
Photo Storage
Basic Guide
Advanced Guide
High-Power Flash HF-DC2
Connect Station CS100
● External flash for illuminating subjects
that are out of range of the built-in flash.
● In addition to saving images you shot
with your camera and viewing them on
a TV, this device allows you to print from
Wi-Fi printers and share your images on
the Internet.
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
Other Accessories
Other Shooting Modes
P Mode
Interface Cable IFC-400PCU
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● For connecting the camera to a computer
or printer.
AV Cable AVC-DC400
● Connect the camera to a TV to enjoy
playback on the larger TV screen.
Index
Printer
Canon-Brand PictBridge-Compatible
Printers
● Even without using a computer, you can
print images by connecting the camera
directly to a printer.
For details, visit your nearest Canon
retailer.
115
Turn the TV on and switch to video
input.
3
Before Use
Using Optional Accessories
Basic Guide
Advanced Guide
● Switch the TV input to the video input you
connected the cable to in step 2.
Playback on a TV
Turn the camera on.
4
Camera Basics
● Press the [
on.
] button to turn the camera
1
2
3
4
5
6
7
8
9
Still Images
Movies
Connecting the camera to a TV with the AV Cable AVC-DC400 (sold
separately) enables you to view your shots on the larger screen of the TV
as you control the camera.
Auto Mode
● Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
Other Shooting Modes
P Mode
For details on connection or how to switch inputs, refer to the TV manual.
● When finished, turn off the camera and
TV before disconnecting the cable.
●
Some information may not be displayed when viewing images on
=
a TV ( 133).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the [
[Video System] on the [ ] tab.
] button and choose
Make sure the camera and TV are
off.
1
2
Connect the camera to the TV.
● On the TV, insert the cable plugs fully into
the video inputs as shown.
● Make sure the cable plugs are in video
inputs of the same color.
Index
● On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
116
Before Use
Saving Images to a Computer
Using the Software
Basic Guide
Advanced Guide
When you connect the camera to the computer using a retail USB cable
(the camera uses Mini-B), you can save your images to the computer.
After downloading the software from the Canon website and installing it on
your computer, you can do the following things.
● CameraWindow
Connect the camera to the
computer.
1
Camera Basics
- Import images and change camera settings
1
2
3
4
5
6
7
8
9
● Image Transfer Utility
● With the camera turned off, open the
cover (1). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal (2).
Auto Mode
=
- Set Image Sync ( 99), receive images
( )
2
● Map Utility
Other Shooting Modes
P Mode
- Shows the GPS information recorded in images on a map
( )
1
●
When viewing or editing images on a computer, always use
software that supports the images shot on the camera (software
normally installed on the computer or general-use software).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Insert the larger plug of the USB cable
in the computer’s USB port. For details
about USB connections on the computer,
refer to the computer user manual.
Connect to a Computer Using a Cable
Checking Your Computer Environment
Turn the camera on to access
2
CameraWindow.
For detailed system requirements and compatibility information for
computers that can use this software, including support in new operating
systems, visit the Canon website.
● Press the [
on.
] button to turn the camera
Index
● Mac OS: CameraWindow is displayed
when a connection is established
between the camera and computer.
Installing the Software
For instructions on installing the software, see “Installing the Software”
=
(
85).
117
Before Use
● Windows: Follow the steps introduced
below.
●
●
●
Windows 7: If the screen in step 2 is not displayed, click the [
icon in the taskbar.
]
Basic Guide
Advanced Guide
● In the screen that is displayed, click the
Mac OS: If CameraWindow is not displayed after step 2, click the
[CameraWindow] icon in the Dock.
change program link of [
].
Although you can save images to a computer simply by
connecting your camera to the computer without using the
software, the following limitations apply.
● Choose [Downloads Images From Canon
Camera] and then click [OK].
Camera Basics
1
2
3
4
5
6
7
8
9
- It may take a few minutes after you connect the camera to the
computer until camera images are accessible.
- Images shot in vertical orientation may be saved in horizontal
orientation.
Auto Mode
Other Shooting Modes
P Mode
- Image protection settings may be cleared from images saved
to a computer.
- Some problems may occur when saving images or image
information, depending on the operating system version, the
software in use, or image file sizes.
● Double-click [
].
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Save the images to the computer.
3
● Click [Import Images from Camera], and
then click [Import Untransferred Images].
● Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
● After images are saved, close
CameraWindow, press the [
Index
] button to
turn the camera off, and unplug the cable.
● To look at a image saved on your
computer, use a software (such as one
installed on your computer by default or
general software) that supports images
shot with a camera.
118
Turn the camera on.
4
Before Use
Printing Images
● Press the [
] button to turn the camera
Basic Guide
Advanced Guide
on.
Still Images
Movies
Your shots can easily be printed by connecting the camera to a printer.
On the camera, you can specify images to set up batch printing, prepare
orders for photo development services, and prepare orders or print
images for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the
sake of illustration. Screens displayed and available functions vary by
printer. Also refer to the printer manual for additional information.
Choose an image.
5
Camera Basics
● Press the [ ][ ] buttons to choose an
image.
1
2
3
4
5
6
7
8
9
Auto Mode
Access the printing screen.
6
Other Shooting Modes
P Mode
● Press the [ ] button, choose [ ], and
press the [ ] button again.
Easy Print
Still Images
Movies
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Easily print your shots by connecting the camera to a PictBridge-
compatible printer (sold separately) with the USB cable.
Print the image.
7
● Press the [ ][ ] buttons to choose
[Print], and then press the [ ] button.
Make sure the camera and printer
are off.
1
● Printing now begins.
● To print other images, repeat the above
procedures starting from step 5 after
printing is finished.
Connect the camera to the printer.
2
● Open the terminal cover. Holding the
smaller cable plug in the orientation
shown, insert the plug fully into the
camera terminal.
● When you are finished printing, turn the
camera and printer off and disconnect
the cable.
Index
● Connect the larger cable plug to the
printer. For other connection details, refer
to the printer manual.
●
For Canon-brand PictBridge-compatible printers (sold separately),
=
see “Printer” ( 115).
Turn the printer on.
3
119
Cropping Images before Printing
Before Use
Configuring Print Settings
Still Images
Movies
Basic Guide
Advanced Guide
Still Images
Movies
By cropping images before printing, you can print a desired image area
instead of the entire image.
Access the printing screen.
1
Choose [Cropping].
1
● Follow steps 1 – 6 in “Easy Print”
Camera Basics
1
2
3
4
5
6
7
8
9
● After following step 1 in “Configuring Print
=
(
119) to access this screen.
=
Settings” ( 120) to access the printing
Auto Mode
screen, choose [Cropping] and press the
Configure the settings.
2
[
] button.
● Press the [ ][ ] buttons to choose an
item, and then press the [ ][ ] buttons to
choose an option.
Other Shooting Modes
P Mode
● A cropping frame is now displayed,
indicating the image area to print.
Adjust the cropping frame as
needed.
2
Default
Date
Matches current printer settings.
Prints images with the date added.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● To resize the frame, move the zoom
lever.
File No. Prints images with the file number added.
Prints images with both the date and file
Both
● To move the frame, press the
number added.
[
][ ][ ][ ] buttons.
● To rotate the frame, press the [ ] button.
● Press the [ ] button, press the
][ ] buttons to choose [OK], and then
–
Off
Default
Off
Matches current printer settings.
–
[
Uses information from the time of shooting to
print under optimal settings.
press the [ ] button.
On
Index
Print the image.
Red-
Eye 1
3
Corrects red-eye.
=
● Follow step 7 in “Easy Print” ( 119)
to print.
No. of
Copies
Choose the number of copies to print.
Specify a desired image area to print
●
●
Cropping may not be possible at small image sizes, or at some
aspect ratios.
–
–
Cropping
=
(
120).
Paper
Settings
Specify the paper size, layout, and other
Dates may not be printed correctly if you crop images shot with
=
details ( 121).
[Date Stamp
] selected.
120
Choosing Paper Size and Layout before Printing
Available Layout Options
Before Use
Still Images
Movies
Default
Bordered
Matches current printer settings.
Basic Guide
Advanced Guide
Prints with blank space around the image.
Choose [Paper Settings].
1
Borderless Borderless, edge-to-edge printing.
● After following step 1 in “Configuring Print
Settings” ( 120) to access the printing
screen, choose [Paper Settings] and
press the [ ] button.
N-up
Choose how many images to print per sheet.
=
Camera Basics
Prints images for identification purposes.
Only available for images with a resolution of L and an
aspect ratio of 4:3.
1
2
3
4
5
6
7
8
9
ID Photo
Auto Mode
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Fixed Size
Other Shooting Modes
P Mode
Choose a paper size.
2
● Press the [ ][ ] buttons to choose an
Printing ID Photos
option, and then press the [ ] button.
Still Images
Movies
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Choose [ID Photo].
1
● Following steps 1 – 4 in “Choosing
Paper Size and Layout before Printing”
Choose a type of paper.
3
● Press the [ ][ ] buttons to choose an
=
(
121), choose [ID Photo] and press
option, and then press the [ ] button.
the [ ] button.
Choose the long and short side
length.
2
● Press the [ ][ ] buttons to choose an
item. Choose the length by pressing the
Choose a layout.
Index
4
● Press the [ ][ ] buttons to choose an
option.
[
][ ] buttons, and then press the [
]
button.
● When choosing [N-up], press the [ ][
buttons to specify the number of images
per sheet.
]
● Press the [ ] button.
Print the image.
5
121
Movie Printing Options
Choose the printing area.
3
Before Use
● Follow step 2 in “Cropping Images before
Single
Prints the current scene as a still image.
Basic Guide
Advanced Guide
=
Printing” ( 120) to choose the printing
area.
Prints a series of scenes, a certain interval apart, on a
single sheet of paper. You can also print the folder number,
file number, and elapsed time for the frame by setting
[Caption] to [On].
Sequence
Camera Basics
1
2
3
4
5
6
7
8
9
Print the image.
4
Auto Mode
●
●
To cancel printing, press the [ ] button, choose [OK], and then
press the [ ] button again.
Printing Movie Scenes
Other Shooting Modes
P Mode
The screen in step 1 can also be displayed by the following
procedure: Display the movie scene that you want to print by
Still Images
Movies
=
following steps 2 – 5 in “Viewing” ( 61), press the [ ][
]
buttons to choose [ ] from the movie control panel, then press
the [ ] button.
Access the printing screen.
1
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Follow steps 1 – 6 in “Easy Print”
=
(
119) to choose a movie. This screen
is displayed.
Choose a printing method.
2
● Press the [ ][ ] buttons to choose [ ],
and then press the [ ][ ] buttons to
choose the printing method.
Print the image.
3
Index
122
Before Use
Adding Images to the Print List (DPOF)
●
●
Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
Basic Guide
Advanced Guide
Still Images
Movies
[
] may be displayed on the camera to warn you that the
memory card has print settings that were configured on another
camera. Changing the print settings using this camera may
overwrite all previous settings.
=
Batch printing ( 124) and ordering prints from a photo development
service can be set up on the camera. Choose up to 998 images on a
memory card and configure relevant settings, such as the number of
copies, as follows. The printing information you prepare this way will
conform to DPOF (Digital Print Order Format) standards.
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
●
●
●
Specifying [Index] will prevent you from choosing [On] for both
[Date] and [File No.] at the same time.
Configuring Print Settings
Other Shooting Modes
P Mode
Still Images
Movies
Index printing is not available on some Canon-brand PictBridge-
compatible printers (sold separately).
Specify the printing format, whether to add the date or file number, and
other settings as follows. These settings apply to all images in the print
list.
The date is printed in a format matching setting details in [Date/
=
Time] on the [ ] tab ( 17).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Press the [
] button, and then
Setting Up Printing for Individual Images
choose [Print Settings] on the [ ] tab.
Choose and configure items as desired
Still Images
Movies
=
(
25).
Choose [Select Images & Qty.].
1
● Press the [
] button, choose
[Select Images & Qty.] on the [ ] tab,
and then press the [ ] button.
Standard
Index
One image is printed per sheet.
Smaller versions of multiple images are
printed per sheet.
Choose an image.
Index
2
Print Type
● Press the [ ][ ] buttons to choose an
Both standard and index formats are
printed.
Both
image, and then press the [ ] button.
● You can now specify the number of
copies.
On
Off
On
Off
Images are printed with the shooting date.
Date
–
● If you specify index printing for the
image, it is labeled with a [ ] icon. To
cancel index printing for the image, press
the [ ] button again. [ ] is no longer
displayed.
Images are printed with the file number.
File No.
–
All image print list settings are cleared
after printing.
On
Off
Clear
DPOF data
–
123
Clearing All Images from the Print List
Specify the number of prints.
3
Before Use
● Press the [ ][ ] buttons to specify the
number of prints (up to 99).
● Following step 1 in “Setting Up Printing
for Individual Images” ( 123), choose
[Clear All Selections] and press the [
button.
Basic Guide
Advanced Guide
=
● To set up printing for other images and
specify the number of prints, repeat steps
2 – 3.
]
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Camera Basics
1
2
3
4
5
6
7
8
9
● Printing quantity cannot be specified for
index prints. You can only choose which
images to print, by following step 2.
Auto Mode
Printing Images Added to the Print List (DPOF)
● When finished, press the [
to return to the menu screen.
] button
Other Shooting Modes
P Mode
Still Images
Movies
● When images have been added to the
Setting Up Printing for a Range of Images
=
=
124), this screen
print list ( 123 –
Still Images
Movies
is displayed after you connect the camera
to a PictBridge-compatible printer. Press
the [ ][ ] buttons to choose [Print now],
and then simply press the [ ] button to
print the images in the print list.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Following step 1 in “Setting Up Printing
=
for Individual Images” ( 123), choose
[Select Range] and press the [ ] button.
● Follow steps 2 – 3 in “Selecting a Range”
● Any DPOF print job that you temporarily
stop will be resumed from the next image.
=
(
68) to specify images.
● Press the [ ][ ] buttons to choose
[Order], and then press the [ ] button.
Setting Up Printing for All Images
Still Images
Movies
Index
● Following step 1 in “Setting Up Printing
=
for Individual Images” ( 123), choose
[Select All Images] and press the [
button.
]
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
124
Choose an image.
2
Before Use
Adding Images to a Photobook
● Press the [ ][ ] buttons to choose an
Basic Guide
Advanced Guide
image, and then press the [ ] button.
Still Images
Movies
● [ ] is displayed.
Photobooks can be set up on the camera by choosing up to 998 images
on a memory card and importing them into the software CameraWindow
117) on your computer, where they are stored in their own folder.
This is convenient when ordering printed photobooks online or printing
photobooks with your own printer.
● To remove the image from the photobook,
press the [ ] button again. [ ] is no
longer displayed.
=
(
Camera Basics
1
2
3
4
5
6
7
8
9
● Repeat this process to specify other
images.
Auto Mode
Choosing a Selection Method
● When finished, press the [
] button
Other Shooting Modes
P Mode
to return to the menu screen.
● Press the [
] button, choose
] tab, and
[Photobook Set-up] on the [
Adding All Images to a Photobook
then choose how you will select images.
Still Images
Movies
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Following the procedure in “Choosing
=
a Selection Method” ( 125), choose
[Select All Images] and press the [
button.
]
●
[
] may be displayed on the camera to warn you that the
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
memory card has print settings that were configured on another
camera. Changing the print settings using this camera may
overwrite all previous settings.
Removing All Images from a Photobook
Index
Adding Images Individually
Still Images
Movies
Still Images
Movies
● Following the procedure in “Choosing
=
a Selection Method” ( 125), choose
Choose [Select].
1
[Clear All Selections] and press the [
button.
]
● Following the procedure in “Choosing
=
a Selection Method” ( 125), choose
[Select] and press the [ ] button.
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
125
Before Use
Troubleshooting
Basic Guide
Advanced Guide
If you think there is a problem with the camera, first check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
9
Camera Basics
1
2
3
4
5
6
7
8
9
Power
Appendix
Helpful information when using the camera
Auto Mode
Nothing happens when the power button is pressed.
=
●
●
●
●
Confirm that the battery pack is charged ( 15).
Confirm that the battery pack is inserted facing the correct way ( 16).
Confirm that the memory card/battery cover is fully closed ( 16).
Dirty battery terminals reduce battery performance. Try cleaning the terminals
with a cotton swab and reinserting the battery pack a few times.
Other Shooting Modes
P Mode
=
=
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
The battery pack runs out of power quickly.
●
Battery performance decreases at low temperatures. Try warming the battery
pack a little by putting it in your pocket, for example, ensuring that the terminals
do not touch any metal objects.
Dirty battery terminals reduce battery performance. Try cleaning the terminals
with a cotton swab and reinserting the battery pack a few times.
If these measures do not help and the battery pack still runs out of power soon
after charging, it has reached the end of its life. Purchase a new battery pack.
●
●
The lens is not retracted.
●
Do not open the memory card/battery cover while the camera is on. Close the
cover, turn the camera on, and then turn it off again ( 16).
=
Index
The battery pack is swollen.
●
Battery swelling is normal and does not pose any safety concerns. However, if
battery swelling prevents the battery pack from fitting in the camera, contact a
Canon Customer Support Help Desk.
Display on a TV
=
Camera images look distorted or not displayed on a TV ( 116).
126
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
Before Use
Shooting
●
To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter
button halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Basic Guide
Advanced Guide
Cannot shoot.
=
=
●
In Playback mode ( 61), press the shutter button halfway ( 23).
=
Strange display on the screen under low light ( 24).
Subjects in shots look too dark.
=
●
●
●
●
Raise the flash and set the flash mode to [ ] ( 58).
Camera Basics
Strange display on the screen when shooting.
1
2
3
4
5
6
7
8
9
=
Adjust brightness by using exposure compensation ( 50).
Adjust contrast by using i-Contrast ( 51,
●
The following display problems are not recorded in still images but are recorded
in movies. Please take note of this.
=
=
75).
=
Use spot metering ( 50).
Auto Mode
-
-
-
The screen may darken under bright light.
The screen may flicker under fluorescent or LED lighting.
Purplish banding may appear on the screen if you compose a shot that
includes a bright light source.
Subjects look too bright, highlights are washed-out.
Other Shooting Modes
P Mode
=
●
●
●
●
Lower the flash and set the flash mode to [ ] ( 28).
=
Adjust brightness by using exposure compensation ( 50).
=
Use spot metering ( 50).
No date stamp is added to images.
Reduce the lighting on subjects.
=
●
Configure the [Date Stamp ] ( 35). Note that date stamps are not added
to images automatically, merely because you have configured the [Date/Time]
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
Shots look too dark despite the flash firing ( 30).
=
setting ( 17).
=
●
Shoot within flash range ( 141).
=
●
Date stamps are not added in shooting modes ( 137) in which [Date Stamp
cannot be configured ( 35).
]
=
●
Increase the ISO speed ( 51).
=
Subjects in flash shots look too bright, highlights are washed-out.
[ ] flashes on the screen when the shutter button is pressed, and shooting
is not possible ( 30).
=
●
●
Shoot within flash range ( 141).
Lower the flash and set the flash mode to [ ] ( 28).
=
=
=
White spots appear in flash shots.
[
●
●
●
●
] is displayed when the shutter button is pressed halfway ( 30).
Set [IS Mode] to [Continuous] ( 59).
Raise the flash and set the flash mode to [ ] ( 58).
Increase the ISO speed ( 51).
Mount the camera on a tripod or take other measures to keep it still. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other means to secure
the camera ( 59).
=
●
This is caused by light from the flash reflecting off dust or airborne particles.
=
Shots look grainy.
=
=
●
Lower the ISO speed ( 51).
Index
Subjects are affected by red-eye.
=
=
●
Set [Red-Eye Lamp] to [On] ( 40). Note that while the red-eye reduction lamp
=
(
4) is lit (for about one second), it is not possible to shoot, because the
Shots are out of focus.
lamp is counteracting red-eye. For best results, have subjects look at the red-eye
reduction lamp. Also try increasing the lighting in indoor scenes and shooting at
closer range.
●
Press the shutter button halfway to focus on subjects before pressing it all the
way down to shoot ( 23).
Make sure subjects are within focus range ( 142).
Set [AF-assist Beam] to [On] ( 39).
Confirm that unneeded functions such as macro are deactivated.
Try shooting with Focus Lock ( 55).
=
=
●
●
●
●
=
●
Edit images using red-eye correction ( 76).
=
=
127
Recording to the memory card takes too long, or continuous shooting is
slower.
Sound is not played during movies.
Before Use
=
=
●
Adjust the volume ( 106) if you have activated [Mute] ( 106) or the sound
in the movie is faint.
=
●
Use the camera to perform low-level formatting of the memory card ( 110).
Basic Guide
Advanced Guide
=
●
No sound is played for movies shot in [ ] mode ( 45) because audio is not
Shooting settings or FUNC. menu settings are not available.
recorded in this mode.
●
Available setting items vary by shooting mode. Refer to “Functions Available in
=
=
Each Shooting Mode”, “FUNC. Menu”, and “Shooting Tab” ( 134 –
137).
Memory Card
Camera Basics
1
2
3
4
5
6
7
8
9
Shooting Movies
The memory card is not recognized.
Auto Mode
=
●
Restart the camera, with the memory card in it ( 22).
The elapsed time shown is incorrect, or recording is interrupted.
●
Use the camera to format the memory card, or switch to a card that supports
high-speed recording. Note that even if the elapsed time display is incorrect, the
length of movies on the memory card corresponds to the actual recording time
Other Shooting Modes
P Mode
Computer
Cannot transfer images to a computer.
=
(
=
109,
143).
●
When attempting to transfer images to the computer via a cable, try reducing the
[
●
] is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to
the memory card quickly enough. Try one of the following measures.
transfer speed as follows.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
-
Press the [
] button to enter Playback mode. Hold the [
] button
down as you press the [ ] and [ ] buttons at the same time. On the next
screen, press the [ ][ ] buttons to choose [B], and then press the [ ] button.
=
-
-
-
Use the camera to perform low-level formatting of the memory card ( 110).
Lower the image quality ( 38).
Switch to a memory card that supports high-speed recording ( 143).
=
=
Zooming is not possible.
=
●
Zooming is not possible when shooting movies in [ ] mode ( 45).
Playback
Playback is not possible.
Index
●
Image or movie playback may not be possible if a computer is used to rename
files or alter the folder structure.
Playback stops, or audio skips.
●
●
●
Switch to a memory card that you have performed low-level formatting on with the
=
camera ( 110).
There may be brief interruptions when playing movies copied to memory cards
that have slow read speeds.
When movies are played on a computer, frames may be dropped and audio may
skip if computer performance is inadequate.
128
Cannot resize images for sending.
Before Use
Wi-Fi
●
Images cannot be resized to larger than their original resolution.
●
Movies cannot be resized.
Basic Guide
Advanced Guide
Cannot access the Wi-Fi menu by pressing the [ ] button.
Images take a long time to send./The wireless connection is disrupted.
●
●
The Wi-Fi menu cannot be accessed while the camera is connected to a printer
Multiple images may take a long time to send. Try resizing the images to reduce
or computer via a cable. Disconnect the cable.
=
sending time ( 98).
●
●
Movies may take a long time to send.
Cannot add a device/destination.
Camera Basics
Do not use the camera near sources of Wi-Fi signal interference, such as
microwave ovens, Bluetooth devices, or other equipment operating on the
2.4 GHz band. Note that images may take a long time to send even when [
is displayed.
Bring the camera closer to the other device you are trying to connect to (such as
the access point), and make sure there are no objects between the devices.
1
2
3
4
5
6
7
8
9
●
A total of 20 items of connection information can be added to the camera. Erase
unneeded connection information from the camera first, and then add new
=
]
devices/destinations ( 103).
Use a computer or smartphone to register Web services ( 90).
Auto Mode
=
●
●
●
To add a smartphone, first install the dedicated application Camera Connect on
Other Shooting Modes
P Mode
=
your smartphone ( 79).
To add a computer, first install the software CameraWindow on your computer.
●
●
●
No notification message is received on a computer or smartphone after
adding CANON iMAGE GATEWAY to the camera.
●
=
Also check your computer and Wi-Fi environment and settings ( 85,
=
86).
Make sure the e-mail address you entered is correct, and try adding the
destination again.
Check the e-mail settings on the computer or smartphone. If they are configured
to block e-mail from certain domains, you may not be able to receive the
notification message.
Do not use the camera near sources of Wi-Fi signal interference, such as
microwave ovens, Bluetooth devices, or other equipment operating on the
2.4 GHz band.
Bring the camera closer to the other device you are trying to connect to (such as
the access point), and make sure there are no objects between the devices.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
Want to erase Wi-Fi connection information before disposing of the
camera or giving it to someone else.
●
Cannot connect to the access point.
●
Confirm that the access point channel is set to a channel supported by the
=
camera ( 141). Note that instead of auto channel assignment, it is advisable to
=
Reset the Wi-Fi settings ( 105).
specify a supported channel manually.
Cannot send images.
●
●
●
The destination device has insufficient storage space. Increase the storage space
on the destination device and resend the images.
The write-protect switch of the memory card in the destination camera is set to
the locked position. Slide the write-protect switch to the unlocked position.
Images are not sent to CANON iMAGE GATEWAY or other Web services if you
move or rename image files or folders on the computer that received images sent
Index
=
using Image Sync via an access point ( 99). Before moving or renaming
these image files or folders on the computer, make sure the images have already
been sent to CANON iMAGE GATEWAY or other Web services.
129
Cannot magnify!/Cannot play back this content in Smart Shuffle/Cannot
rotate/Cannot modify image/Cannot modify/Cannot assign to category/
Unselectable image
Before Use
On-Screen Messages
If an error message is displayed, respond as follows.
Shooting or Playback
Basic Guide
Advanced Guide
●
The following functions may be unavailable for images that were renamed or
already edited on a computer, or images shot with another camera. Note that
starred (*) functions are not available for movies.
=
=
=
Magnify* ( 65), Smart Shuffle* ( 66), Rotate* ( 71), Favorites
=
(
=
=
=
72), Edit* ( 73), Print List* ( 123), and Photobook Set-up* ( 125)
Camera Basics
1
2
3
4
5
6
7
8
9
No memory card
Invalid selection range
●
The memory card may be inserted facing the wrong way. Reinsert the memory
=
=
=
124), you
Auto Mode
●
When specifying a range for image selection ( 68,
71,
=
card facing the correct way ( 16).
attempted to choose an initial image that was after the final image, or vice-versa.
Other Shooting Modes
P Mode
Memory card locked
Exceeded selection limit
●
The write-protect switch of the memory card is set to the locked position. Switch
=
●
●
●
More than 998 images were selected for Print List ( 123) or Photobook Set-up
=
the write-protect switch to the unlocked position ( 16).
=
(
125). Choose 998 images or less.
=
=
Print List ( 123) or Photobook Set-up ( 125) settings could not be saved
correctly. Reduce the number of selected images and try again.
Cannot record!
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
Shooting was attempted without a memory card in the camera. To shoot, insert a
=
You attempted to choose more than 500 images in Protect ( 67), Erase
=
memory card facing the correct way ( 16).
=
=
=
(
(
70), Favorites ( 72), Print List ( 123), or Photobook Set-up
125).
=
=
Memory card error ( 110)
●
If the same error message is displayed even after you have formatted a
Naming error!
=
supported memory card ( 2) and have inserted it facing the correct way
●
The folder could not be created or images could not be recorded, because the
highest supported folder number (999) for storing images on the card has been
reached and the highest supported image number (9999) for images in folders
has been reached. On the [ ] tab, change [File Numbering] to [Auto Reset]
=
(
16), contact a Canon Customer Support Help Desk.
Insufficient space on card
=
=
=
42,
●
There is not enough free space on the memory card to shoot ( 28,
=
(
=
110), or format the memory card ( 109).
=
=
49) or edit images ( 73). Either erase unneeded images ( 70) or
insert a memory card with enough free space ( 16).
=
Lens Error
●
This error may occur if the lens is held while it is moving, or when the camera is
Index
=
Charge the battery ( 15)
used in dusty or sandy locations.
●
Frequent display of this error message may indicate camera damage. In this
case, contact a Canon Customer Support Help Desk.
No Image.
●
The memory card does not contain any images that can be displayed.
A camera error was detected (error number)
=
Protected! ( 67)
●
If this error message is displayed immediately after a shot, the image may not
have been saved. Switch to Playback mode to check for the image.
Frequent display of this error message may indicate camera damage. In this
case, write down the error number (Exx) and contact a Canon Customer Support
Help Desk.
Unidentified Image/Incompatible JPEG/Image too large/Cannot play back
MP4
●
●
●
Unsupported or corrupt images cannot be displayed.
It may not be possible to display images that were edited or renamed on a
computer, or images shot with another camera.
130
File Error
Disconnected/Receiving failed/Sending failed
Before Use
=
●
Correct printing ( 119) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is
connected to the printer.
●
You may be in an environment where Wi-Fi signals are obstructed.
Do not use the camera near microwave ovens, Bluetooth devices, and other
devices that operate on the 2.4 GHz band.
●
Basic Guide
Advanced Guide
●
●
Bring the camera closer to the other device you are trying to connect to (such as
the access point), and make sure there are no objects between the devices.
Check the connected device to make sure it is not experiencing errors.
Print error
=
●
Check the paper size setting ( 121). If this error message is displayed when
the setting is correct, restart the printer and complete the setting on the camera
again.
Camera Basics
Sending failed
1
2
3
4
5
6
7
8
9
Memory card error
Ink absorber full
●
If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help
Desk.
Auto Mode
●
Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
Other Shooting Modes
P Mode
Receiving failed
Insufficient space on card
Wi-Fi
Connection failed
●
There is not enough free space on the memory card in the target camera to
receive images. Erase images to create space on the memory card, or insert a
memory card with sufficient space.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
●
No access points were recognized. Check the access point settings ( 86).
●
A device could not be found. Turn the camera off and on again, and retry the
connection.
Receiving failed
Memory card locked
●
Check the device you want to connect to and make sure it is ready for connection.
●
The write-protect switch of the memory card in the camera to receive the images
is set to the locked position. Slide the write-protect switch to the unlocked
position.
Cannot determine access point
●
The WPS buttons on numerous access points were pressed simultaneously. Try
reconnecting again.
Receiving failed
Naming error!
No access points found
●
●
Check to make sure that the access point is turned on.
When connecting to an access point manually, make sure that you entered the
correct SSID.
●
When the highest folder number (999), and the highest image number (9999)
have been reached on the receiving camera, images cannot be received.
Index
Insufficient space on server
Incorrect password/Incorrect Wi-Fi security settings
●
Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create
=
●
Check the access point security settings ( 86).
space.
=
●
Save the images sent via Image Sync ( 99) to your computer.
IP address conflict
●
Reset the IP address so that it does not conflict with another.
Check network settings
●
Check to make sure your computer can connect to the Internet with the current
network settings.
131
=
=
(22) AE lock ( 50)
(27) IS mode icon ( 32)
Before Use
On-Screen Information
=
(23) Shutter speed
(28) Time zone ( 107)
Basic Guide
Advanced Guide
=
(24) Aperture value
(29) Image stabilization ( 59)
(25) Exposure compensation level
(30) Exposure compensation bar
=
(
=
( 50)
50)
Shooting (Information Display)
=
(26) Zoom bar ( 28)
Camera Basics
1
2
3
4
5
6
7
8
9
(
)
26
(
)
27
Auto Mode
Battery Level
( )
9
(
)
(
) (
)
(
) (
)
10
11 12
13 14
An on-screen icon or message indicates the battery charge level.
( )
1
Other Shooting Modes
P Mode
(
)
15
Display
Details
Sufficient charge.
( )
2
(
16
)
)
( )
3
( )
4
( )
5
( )
6
Slightly depleted, but sufficient.
(
17
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Nearly depleted. Charge the battery
pack soon.
(Blinking red)
(
)
) (
28 29
)
)
( )
7
(
18
Depleted. Charge the battery pack
immediately.
[Charge the battery]
( )
8
(
)
)
19
(
20
(
) (
)
(
)
(
) (
)
21 22
23
24 25
(
30
=
=
(1) Battery level ( 132)
(12) Remaining time ( 143)
=
=
(2) White balance ( 52)
(13) Zoom magnification ( 33),
=
Index
Digital tele-converter ( 54)
=
(3) My Colors ( 52)
=
=
(14) Focus range ( 54,
54)
=
(4) Drive mode ( 36)
=
(15) Shooting mode ( 134), Scene
=
(5) Eco mode ( 108)
=
icon ( 31)
=
(6) Self-timer ( 34)
=
(16) Flash mode ( 58)
=
(7) Camera shake warning ( 30)
=
(17) AF frame ( 55), Spot AE point
=
(8) Metering method ( 50)
=
frame ( 50)
=
(9) Still image compression ( 59),
=
(18) Date stamp ( 35)
=
Resolution ( 37)
=
(19) ISO speed ( 51)
=
(10) Recordable shots ( 143)
=
(20) i-Contrast ( 51)
=
(11) Movie quality ( 38)
=
(21) Grid lines ( 38)
132
Before Use
Playback (Detailed Information Display)
●
Some information may not be displayed when viewing images on
=
a TV ( 116).
Basic Guide
Advanced Guide
( ) ( )(
)
10
(
)
8
9
11
( )
1
Summary of Movie Control Panel
(
)
12
The following operations are available on the movie control panel,
accessed as described in “Viewing” ( 61).
Camera Basics
( )
2
1
2
3
4
5
6
7
8
9
(
13
)
=
(
)
)
)
( )
3
14
Exit
Auto Mode
(
15
( )
4
( )
5
( )
6
(
Playback
16
(
)
17
Other Shooting Modes
P Mode
Slow Motion (Press the [ ][ ] buttons to adjust the playback
speed. No sound is played.)
(
18
)
(
19
)
Skip Backward* (To continue skipping backward, keep holding
down the [ ] button.)
( )
7
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Previous Frame (For fast-rewind, keep holding down the [
button.)
]
(
)( )(
)
(
) (
)
(
)
20 21 22
23 24
25
=
(1) Movie recording ( 28,
(13) Shutter speed (still images), Image
quality / Frame rate (movies)
Next Frame (For fast-forward, keep holding down the [ ] button.)
=
61)
Skip Forward* (To continue skipping forward, keep holding down
the [ ] button.)
=
(
38)
=
(2) Shooting mode ( 134)
(14) Aperture value
=
(3) ISO speed ( 51), Playback
=
Edit ( 77)
=
=
speed ( 45)
(15) Flash ( 58)
Shown when the camera is connected to a PictBridge-compatible
printer ( 119).
=
=
75)
(4) Exposure compensation level
(16) i-Contrast ( 51,
=
=
(
50)
=
=
54)
(17) Focus range ( 54,
* Displays the frame approx. 4 sec. before or after the current frame.
=
(5) White balance ( 52)
(18) File size
Index
=
(6) Histogram ( 63)
=
=
(19) Still images: Resolution ( 143)
●
To skip forward or back during movie playback, press the [ ][
buttons.
]
(7) Compression (image quality)
Movies: Playback time ( 143)
=
=
(
59) / Resolution ( 37),
=
(20) Image editing ( 73)
MP4 (movies)
=
(21) Protection ( 67)
=
(8) Image Sync ( 99)
=
(22) Favorites ( 72)
=
(9) Battery level ( 132)
=
=
75)
(23) My Colors ( 52,
=
(10) Metering method ( 50)
=
(24) Red-eye correction ( 76)
(11) Folder number - File number
=
(25) Shooting date/time ( 17)
=
(
110)
(12) Current image no. / Total no. of
images
133
Before Use
Functions and Menu Tables
Basic Guide
Advanced Guide
Functions Available in Each Shooting Mode
Camera Basics
1
2
3
4
5
6
7
8
9
Shooting Mode
Auto Mode
Function
Exposure Compensation ( 50)
–
–
–
O
O
O
O
O
O
O
O
O
O
O
=
Other Shooting Modes
P Mode
=
Flash ( 58)
–
–
–
O
–
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
–
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
1
–
–
*
O
O
O
O
O
O
O
O
O
O
O
O
=
=
54)
Focus Range ( 54,
O
–
O
O
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
O
–
O
O
–
O
O
–
O
O
O
–
O
O
O
O
O
O
O
O
O
–
O
O
O
O
–
–
–
=
Tracking AF ( 56)
–
–
–
–
O
O
=
Change Display ( 24)
*1 Not available. However, it may switch to [ ] in some cases.
Index
134
Before Use
FUNC. Menu
Basic Guide
Advanced Guide
Shooting Mode
Function
Camera Basics
=
Metering Method ( 50)
1
2
3
4
5
6
7
8
9
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Auto Mode
–
–
–
–
–
–
–
–
–
–
–
–
–
=
My Colors ( 52)
Other Shooting Modes
P Mode
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
1
1
2
–
–
–
–
–
–
–
–
–
–
–
*
*
*
=
White Balance ( 52)
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
–
–
–
–
=
ISO Speed ( 51)
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
O
=
Self-Timer ( 34)
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
=
Self-Timer Settings ( 35)
Index
=
Drive Mode ( 36)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
*1 White balance is not available.
*2 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and skin tone.
135
Before Use
Shooting Mode
Basic Guide
Advanced Guide
Function
=
Still Image Aspect Ratio ( 37)
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Camera Basics
1
2
3
4
5
6
7
8
9
O
O
O
O
O
=
Auto Mode
Resolution ( 37)
–
–
O
O
–
O
O
–
O
–
O
O
–
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
–
O
O
–
Other Shooting Modes
P Mode
–
–
–
–
–
–
–
O
=
Compression ( 59)
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
O
O
O
O
O
O
O
O
O
O
O
O
O
=
Movie Quality ( 38)
1
O
O
O
O
O
O
O
O
O
O
O
O
O
*
=
*1 Linked to aspect ratio settings and automatically set ( 45)
Index
136
Before Use
Shooting Tab
Basic Guide
Advanced Guide
Shooting Mode
Function
Camera Basics
=
AF Frame ( 55)
1
2
3
4
5
6
7
8
9
–
–
–
–
–
–
–
Face AiAF
Tracking AF
Center
O
–
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
Auto Mode
–
–
O
O
O
Other Shooting Modes
P Mode
1
=
AF Frame Size ( 55)
*
–
–
–
–
–
–
–
–
Normal
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
Small
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
=
Digital Zoom ( 33)
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
Standard
O
O
–
O
O
O
O
O
O
O
O
–
O
O
–
O
O
–
O
O
–
2
Off
*
Tele-Converter 1.6x/Tele-Converter 2.0x
=
AF-Point Zoom ( 39)
–
–
–
–
On
Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
=
Servo AF ( 57)
–
–
–
–
–
–
–
On
Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Index
3
O
O
O
O
O
O
*
=
Continuous AF ( 57)
On
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
Off
O
O
*1 Available when the AF frame is set to [Center].
*2 When transitioning to a shooting mode where zoom is unavailable, unlocks zoom
*3 [On] when subject movement is detected.
137
Before Use
Shooting Mode
Basic Guide
Advanced Guide
Function
=
AF-assist Beam ( 39)
On
Off
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Camera Basics
1
2
3
4
5
6
7
8
9
=
Flash Settings ( 40)
–
Red-Eye Lamp
On/Off
O
O
O
O
O
O
O
O
O
O
O
O
O
Auto Mode
=
i-Contrast ( 51)
Other Shooting Modes
P Mode
–
–
–
–
–
–
–
–
–
–
–
Auto
O
O
O
O
–
–
Off
O
O
O
O
O
O
O
O
O
O
O
=
Review Image after Shooting ( 40)
Off/Quick/2 sec./4 sec./
Display Time
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
8 sec./Hold
Off/Detailed
Display Info
=
Grid Lines ( 38)
On/Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
=
IS Settings ( 59)
Continuous/Off
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
IS Mode
Shoot Only
1
2
O
O
Dynamic IS
O
Index
=
( 35)
Date Stamp
Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
Date/Date & Time
138
Before Use
Set Up Tab
Playback Tab
Basic Guide
Advanced Guide
Options
Reference Page
Options
Reference Page
Mute
Slideshow
Erase
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
106
106
107
17
66
70
67
71
72
125
75
76
74
73
75
61
61
72
61
Volume
Camera Basics
1
2
3
4
5
6
7
8
9
Hints & Tips
Date/Time
Protect
Auto Mode
Rotate
Time Zone
Favorites
107
108
108
23,
Other Shooting Modes
P Mode
Lens Retraction
Eco Mode
Photobook Set-up
i-Contrast
Red-Eye Correction
Cropping
Power Saving
Disp. Brightness
Start-up Image
Format
=
108
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
109
109
Resize
My Colors
Transition
Scroll Display
Auto Rotate
Resume
=
109,
110
111
111
116
78
110
File Numbering
Create Folder
Units
Video System
Wireless settings
Certification Logo Display
Index
111
18
Language
Reset All
112
139
Before Use
Print Tab
Handling Precautions
Basic Guide
Advanced Guide
Options
Reference Page
● The camera is a high-precision electronic device. Avoid dropping it or
subjecting it to strong impact.
–
Printing
Select Images & Qty.
=
● Never bring the camera near magnets, motors, or other devices that
generate strong electromagnetic fields. The electromagnetic fields may
cause malfunction in the camera or erase image data.
123
Camera Basics
1
2
3
4
5
6
7
8
9
Select Range
=
=
=
=
124
124
124
123
Select All Images
Clear All Selections
Print Settings
Auto Mode
● If water droplets or dirt adheres to the camera or screen, wipe with
a dry soft cloth, such as an eyeglass cloth. Do not rub hard or apply
force.
Other Shooting Modes
P Mode
● Never use cleaners containing organic solvents to clean the camera
or screen.
● Use a blower brush to remove dust from the lens. If cleaning is difficult,
contact a Canon Customer Support Help Desk.
Playback Mode FUNC. Menu
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● When you suddenly transfer the camera from cold place to hot
environments, condensation (water drops) may form on the camera.
To prevent condensation from forming on the camera after sudden
temperature changes, put the camera in an airtight, resealable plastic
bag and let it gradually adjust to the temperature before removing it
from the bag.
Options
Reference Page
Rotate
=
=
=
=
=
=
=
=
71
67
72
119
61
66
64
66
Protect
Favorites
Printing
● If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove
the battery pack and memory card, and wait until the moisture has
evaporated before resuming use.
Play Movie
Smart Shuffle
Image Search
Slideshow
Index
● Store unused battery packs in a plastic bag or other container. To
maintain battery performance if you will not use the battery pack for
some time, charge it about once a year and then use the camera until
it runs out of power before storing the battery pack.
140
Built-In Flash
Before Use
Flash Range (Wide angle end).........50 cm – 5.0 m (1.6 – 16 ft.)
Flash Range (Telephoto end) ...........1.4 m – 2.7 m (4.6 – 8.9 ft.)
Specifications
Basic Guide
Advanced Guide
Shutter Speed
Auto Mode (automatic settings)........1 – 1/4000 sec.
Range in all shooting modes
Camera
Maximum......................................15 sec.
Minimum.......................................1/4000 sec.
Camera Basics
1
2
3
4
5
6
7
8
9
Image Sensor
Camera Effective Pixels (Max.)
(Image processing may cause a decrease
in the number of pixels.) ........................Approx. 20.0 megapixels
Total Pixels........................................Approx. 20.5 megapixels
Image Size........................................1/2.3 type
Auto Mode
Speed (unit: sec.)..................................Long Shutter Mode
15, 13, 10, 8, 6, 5, 4, 3.2, 2.5, 2,
1.6, 1.3, 1
Other Shooting Modes
P Mode
Aperture
F number ..........................................3.5 – 8.0 (W)
Lens
Focal Length
(35mm film equivalent) ..........................4.3 – 180.6 mm
(24 – 1008 mm)
Zoom Magnification ..........................42x
6.6 – 8.0 (T)
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
AF
AF frame...........................................Face AiAF (number of AF frames:
max.9), Tracking AF, Center
File Format............................................Design rule for Camera File
system (DCF) compliant; DPOF
Digital zoom
Magnification.....................................Approx. 4x
Max. Magnification
(digital x optical zoom)......................Approx. 168x
Focal Length
(max. telephoto, 35mm film equivalent)....Equivalent to approx. 4032 mm
(version 1.1) compatible
Data Type (Still Images)
Image File Format.............................Exif 2.3 (DCF 2.0)
Image Type.......................................JPEG
Screen (Monitor)
Data Type (Movies)
Index
Type..................................................TFT color liquid crystal
Screen Size ......................................3.0 type
Effective Pixels .................................Approx. 230,000 dots
Recording Format.............................MP4
Video.................................................MPEG-4 AVC/H.264
Audio.................................................MPEG-4 AAC-LC (Monaural)
Continuous Shooting
Power Supply
Speed
Battery Pack .....................................NB-11LH
(Varies depending on the subject, zoom
position, and other shooting factors,
as well as memory card brands.) ............Normal Continuous Shooting in
Auto/P modes: Approx. 0.5 shots/
sec.
Normal Continuous Shooting Low
Light mode: Approx. 2.2 shots/sec.
141
Number of Shots/Recording Time, Playback Time
Interface
Before Use
Wired ................................................Hi-Speed USB (Mini-B)
Analog Audio Output (Monaural)
Analog Video Output (NTSC/PAL)
Wireless............................................Wi-Fi
Number of Still Image Shots (CIPA compliant)
Number of Still Image Shots (Eco Mode On)
Movie Recording Time (CIPA compliant)*1
Approx. 195 shots
Approx. 260 shots
Approx. 50 min.
Basic Guide
Advanced Guide
Specifications: IEEE 802.11b/g/n
Frequency: 2.4 GHz
Channels: 1 – 11
Security: WEP, WPA-PSK (AES/
TKIP), WPA2-PSK (AES/TKIP)
NFC
Movie Recording Time (Continuous Shooting)*2 Approx. 1 hr. 30 min.
Playback Time*3
Approx. 5 hr.
Camera Basics
1
2
3
4
5
6
7
8
9
*1 Total time when shooting repeatedly with the following conditions
- [ ] mode and defaults for other settings
- Shooting/pausing, zooming, turning the camera on and off
*2 Total time when shooting repeatedly with the following conditions
Auto Mode
Other Shooting Modes
P Mode
Operating Environment
Temperature......................................0 – 40 °C (32 – 104 °F)
- [
] mode and defaults for other settings
- If the maximum amount of movie recording time or number of shots is reached,
the camera will shut down / restart.
Dimensions (CIPA compliant)
(WxHxD) ...............................................104.4 x 69.1 x 85.1 mm
(4.11 x 2.72 x 3.35 in.)
*3 Time when playing a still image slideshow.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Shooting Range
Weight (CIPA compliant)
Including Battery Pack,
Memory Card....................................Approx. 325 g (approx. 11.5 oz.)
Camera Body Only ...........................Approx. 308 g (approx. 10.9 oz.)
Shooting
Mode
Focus
Range
Maximum Wide Angle
Maximum Telephoto
(
)
(
)
–
0 cm (0 in.) – infinity
1.4 m (4.6 ft.) – infinity
5 cm (2.0 in.) – infinity 1.4 m (4.6 ft.) – infinity
Other
modes
0 – 50 cm
(0 in. – 1.6 ft.)
–
Index
3.0 m (9.8 ft.) – infinity 3.0 m (9.8 ft.) – infinity
142
Number of Shots per Memory Card
Recording Time per Memory Card
Before Use
=
The number of shots at an aspect ratio ( 37) of 4:3 per memory card
Total Recording Time
Recording Pixels per 16 GB Memory Card
(Approx.)
Recording Time for One
Time (Approx.)
Basic Guide
Advanced Guide
is as follows. Note that the number of shots available varies by aspect
ratio.
2 hr 35 min. 37 sec.
29 min. 59 sec.
(1280 x 720)
Number of Shots per 16 GB Memory Card (Approx. shots)
Camera Basics
1792
3017
8 hr 25 min. 48 sec.
1 hr
(640 x 480)
1
2
3
4
5
6
7
8
9
Auto Mode
3546
● The values in the table are based on Canon measurement conditions
and may change depending on the subject, memory card and camera
settings.
5925
Other Shooting Modes
P Mode
9344
● Recording times for individual movies are based on memory cards
rated at an SD speed class of 10. Recording may stop when cards
rated at lower speed classes are used. Recording will also stop
automatically when the file size reaches 4 GB, or when the card
becomes full.
16755
53992
80988
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● The values in the table are based on Canon measurement conditions
and may change depending on the subject, memory card and camera
settings.
Index
143
Battery Pack NB-11LH
Before Use
Type:
Rechargeable lithium-ion battery
3.6 V DC
800 mAh
Approx. 300 times
Basic Guide
Advanced Guide
Nominal Voltage:
Nominal Capacity:
Charging Cycles:
Operating Temperatures: 0 – 40 °C (32 – 104 °F)
Camera Basics
1
2
3
4
5
6
7
8
9
Battery Charger CB-2LF/CB-2LFE
Auto Mode
Rated Input:
Rated Output:
Charging Time:
100 – 240 V AC (50/60 Hz)
4.2 V DC, 0.41 A
Approx. 2 hr. 20 min. (when using NB-11LH)
Other Shooting Modes
P Mode
Operating Temperatures: 5 – 40 °C (41 – 104 °F)
● The number of shots that can be taken is based on measurement
guidelines of the Camera & Imaging Products Association (CIPA).
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Under some shooting conditions, the number of shots and recording
time may be less than mentioned above.
● Number of shots/time with a fully charged battery pack.
Index
144
File numbering 110
Before Use
L
Index
→
Fireworks Fireworks (shooting
Lamp 39, 40
mode)
Basic Guide
Advanced Guide
Live view control (shooting mode) 42
Long shutter (shooting mode) 47
Low light (shooting mode) 43
Fireworks (shooting mode) 43
Fish-eye effect (shooting mode) 44
Flash
A
D
Accessories 114
Date/time
AE lock 50
AF frames 55
Aspect ratio 37
AUTO mode (shooting mode) 19, 28
AV cable 115, 116
Adding date stamps 35
Changing 17
Date/time battery 18
Settings 17
World clock 107
Deactivating flash 58
On 58
Slow synchro 58
Focusing
M
Camera Basics
1
2
3
4
5
6
7
8
9
Macro (focus range) 54
Magnified display 65
Memory card 2
Recording time 143
Menu
Auto Mode
AF frames 55
AF-point zoom 39
Servo AF 57
Other Shooting Modes
P Mode
→
Defaults Reset all
Digital tele-converter 54
Digital zoom 33
Display language 18
DPOF 123
B
Basic operations 25
Table 134
→
Batteries Date/time (date/time
Focus lock 55
Focus range
Infinity 54
Macro 54
FUNC. menu
battery)
Metering method 50
Miniature effect (shooting mode) 45
Monochrome (shooting mode) 46
Movies
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Power saving 23
Battery charger 2, 114
Battery pack
E
Charging 15
Eco mode 108
Level 132
Eco mode 108
Editing
Basic operations 24
Table 135, 140
Editing 77
Image quality (resolution/frame
rate) 38
Cropping 74
i-Contrast 75
My colors 75
Power saving 23
Black and white images 53
G
Recording time 143
My colors 52, 75
Grid lines 38
Red-eye correction 76
Resizing images 73
Editing or erasing connection
information 103
C
I
P
Camera
Index
i-Contrast 51, 75
P (shooting mode) 49
Package contents 2
Photobook set-up 125
PictBridge 115, 119
Playback Viewing
Portrait (shooting mode) 43
Poster effect (shooting mode) 44
Power 114 Battery charger
→
Reset all 112
→
Image quality Compression ratio
→
Erase Erasing
Camera access point mode 84
Camera connect 79
CameraWindow 117
CANON iMAGE GATEWAY 78, 90
Center (AF frame mode) 55
Clock 27
Color (white balance) 52
Compression ratio (image quality) 59
Connecting via an access point 86
Cropping 74, 120
(image quality)
Images
Erasing 70
Erasing all 70
Error messages 130
Exposure
Display period 40
Erasing 70
→
→
Playback Viewing
Compensation 50
Protecting 67
Image stabilization 59
Image sync 99
Indicator 27
Infinity (focus range) 54
ISO speed 51
→
Battery pack
F
Power saving 23
Printing 119
Program AE 49
Face AiAF (AF frame mode) 56
Face self-timer (shooting mode) 47
Favorites 72
Custom white balance 52
145
Protecting 67
Software
Installation 117
Before Use
Saving images to a computer
85, 117
Sounds 106
R
Basic Guide
Advanced Guide
Red-eye correction 76
Remote shooting 102
Reset all 112
Strap 2, 14
Super vivid (shooting mode) 44
Resizing images 73
Resolution (image size) 37
Rotating 71
Camera Basics
1
2
3
4
5
6
7
8
9
T
Auto Mode
Terminal 116, 119
Toy camera effect (shooting mode)
46
S
Other Shooting Modes
P Mode
Saving images to a computer 85, 117
Screen
Tracking AF 56
Traveling with the camera 107
Troubleshooting 126
TV display 116
Display language 18
Icons 132, 133
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
→
Menu FUNC. menu, Menu
SD/SDHC/SDXC memory cards
→
Memory card
V
Searching 64
Self-timer 34
Viewing 20
Image search 64
Index display 64
Magnified display 65
Single-image display 20
Slideshow 66
2-second self-timer 34
Customizing the self-timer 35
Face self-timer (shooting mode)
47
Sending images 97
Smart shuffle 66
TV display 116
Index
Sending images to a computer 85
Sending images to another camera
95
W
Sending images to a printer 94
Sending images to a smartphone 79
Sending images to web services 93
Sepia tone images 53
Servo AF 57
White balance (color) 52
Wi-Fi functions 78
Wi-Fi menu 82
World clock 107
→
Wrist strap Strap
Shooting
→
Shooting date/time Date/time
Z
Shooting information 132
Zoom 19, 29, 33
Slideshow 66
Smart shuffle 66
146
● Be sure to use the product as directed in this guide.
Be sure to use the wireless LAN function of this product within the
guidelines noted in this guide. Canon accepts no responsibility for
damages or loss if the function is used in ways other than as described
in this guide.
Before Use
Wi-Fi (Wireless LAN) Precautions
Basic Guide
Advanced Guide
● Countries and Regions Permitting WLAN Use
- Use of WLAN is restricted in some countries and regions, and illegal
use may be punishable under national or local regulations. To avoid
violating WLAN regulations, visit the Canon website to check where
use is allowed.
Note that Canon cannot be held liable for any problems arising from
use in other countries and regions.
● Do not use the wireless LAN function of this product near medical
equipment or other electronic equipment.
Use of the wireless LAN function near medical equipment or other
electronic equipment may affect operation of those devices.
Camera Basics
1
2
3
4
5
6
7
8
9
Auto Mode
Radio Wave Interference Precautions
Other Shooting Modes
P Mode
● Doing any of the following may incur legal penalties:
- Altering or modifying the product
- Removing the certification labels from the product
● This product may receive interference from other devices that emit
radio waves. To avoid interference, be sure to use this product as far
away as possible from such devices, or avoid using the devices at the
same time as this product.
● According to foreign exchange and foreign trade law regulations,
export permission (or service transaction permission) from the
Japanese government is necessary to export strategic resources or
services (including this product) outside Japan.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● Because this product includes American encryption software, it falls
under U.S. Export Administration Regulations, and cannot be exported
to or brought into a country under U.S. trade embargo.
Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions
more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
● Be sure to make notes of the wireless LAN settings you use.
The wireless LAN settings saved to this product may change or be
erased due to incorrect operation of the product, the effects of radio
waves or static electricity, or accident or malfunction. Be sure to make
notes of wireless LAN settings as a precaution. Please note that
Canon accepts no responsibility for direct or indirect damages or loss
of earnings resulting from a degradation or disappearance of content.
● Only use networks you are authorized to use
This product searches for Wi-Fi networks in the vicinity and displays
the results on the screen. Networks you are not authorized to use
(unknown networks) may also be displayed. However, attempting to
connect to or using such networks could be regarded as unauthorized
access. Be sure to use only networks you are authorized to use, and
do not attempt to connect to other unknown networks.
Index
● When transferring this product to another person, disposing of it, or
sending it for repair, be sure to note the wireless LAN settings and
reset the product to its default settings (erase settings) if necessary.
● Canon will not make compensation for damages resulting from loss or
theft of the product.
Canon accepts no responsibility for damages or loss resulting from
unauthorized access or use of target devices registered on this
product due to loss or theft of the product.
147
Trademarks and Licensing
If security settings have not been properly set, the following problems may
occur.
Before Use
● Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
● Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions
and attempt to acquire the data you are sending.
Basic Guide
Advanced Guide
● Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
● Unauthorized network access
● App Store, iPhone, and iPad are trademarks of Apple Inc.
Third parties with malicious intent may gain unauthorized access to
the network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access
such as impersonation (where someone assumes an identity to gain
access to unauthorized information) or springboard attacks (where
someone gains unauthorized access to your network as a springboard
to cover their tracks when infiltrating other systems).
Camera Basics
1
2
3
4
5
6
7
8
9
● The SDXC logo is a trademark of SD-3C, LLC.
● Wi-Fi®, Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected Setup™
are trademarks or registered trademarks of the Wi-Fi Alliance.
Auto Mode
Other Shooting Modes
P Mode
● The N-Mark is a trademark or registered trademark of NFC Forum, Inc.
in the United States and in other countries.
● All other trademarks are the property of their respective owners.
To prevent these types of problems from occurring, be sure to thoroughly
secure your Wi-Fi network.
Only use this camera’s Wi-Fi function with a proper understanding of
Wi-Fi security, and balance risk and convenience when adjusting security
settings.
● This device incorporates exFAT technology licensed from Microsoft.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● This product is licensed under AT&T patents for the MPEG-4 standard
and may be used for encoding MPEG-4 compliant video and/or
decoding MPEG-4 compliant video that was encoded only (1) for
a personal and non-commercial purpose or (2) by a video provider
licensed under the AT&T patents to provide MPEG-4 compliant
video. No license is granted or implied for any other use for MPEG-4
standard.
The camera can print to PictBridge-compatible printers
via Wi-Fi. PictBridge technical standards make it easy
to connect digital cameras, printers, and other devices
directly. Additionally, a new standard called DPS
over IP enables PictBridge connections in network
environments, and the camera is also compatible with
this standard.
Index
148
Disclaimer
Before Use
● Unauthorized reproduction of this guide is prohibited.
Basic Guide
Advanced Guide
● All measurements based on Canon testing standards.
● Information subject to change without notice, as are product
specifications and appearance.
● Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
Camera Basics
1
2
3
4
5
6
7
8
9
● The above items notwithstanding, Canon cannot be held liable for any
loss arising from the use of this product.
Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
149
|