Online Manual
My Image Garden Guide
English
Symbols Used in This Document
Warning
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect
operation of the equipment. These must be observed for safe operation.
Caution
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect
operation of the equipment. These must be observed for safe operation.
Important
Instructions including important information. To avoid damage and injury or improper use of the product,
be sure to read these indications.
Note
Instructions including notes for operation and additional explanations.
Basics
Instructions explaining basic operations of your product.
Note
• Icons may vary depending on your product.
3
Touch-enabled Device Users (Windows)
For touch actions, you need to replace "right-click" in this document with the action set on the operating
system. For example, if the action is set to "press and hold" on your operating system, replace "right-click"
with "press and hold."
4
Trademarks and Licenses
• Microsoft is a registered trademark of Microsoft Corporation.
• Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other
countries.
• Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other
countries.
• Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• Mac, Mac OS, AirPort, App Store, AirPrint, the AirPrint logo, Safari, Bonjour, iPad, iPhone and iPod
touch are trademarks of Apple Inc., registered in the U.S. and other countries. macOS is a trademarks
of Apple Inc.
• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under
license.
• Google Cloud Print, Google Chrome, Chrome OS, Chromebook, Android, Google Play, Google Drive,
Google Apps and Google Analytics are either registered trademarks or trademarks of Google Inc.
• Adobe, Flash, Photoshop, Photoshop Elements, Lightroom, Adobe RGB and Adobe RGB (1998) are
either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
• Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. and licensed to Canon Inc.
• Autodesk and AutoCAD are registered trademarks or trademarks of Autodesk, Inc., and/or its
subsidiaries and/or affiliates in the USA and/or other countries.
Note
• The formal name of Windows Vista is Microsoft Windows Vista operating system.
Copyright (c) 2003-2015 Apple Inc. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of Apple Inc. ("Apple") nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
5
Apache License
Version 2.0, January 2004
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by
Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting
the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled
by, or are under common control with that entity. For the purposes of this definition, "control" means
(i) the power, direct or indirect, to cause the direction or management of such entity, whether by
contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii)
beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this
License.
"Source" form shall mean the preferred form for making modifications, including but not limited to
software source code, documentation source, and configuration files.
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source
form, including but not limited to compiled object code, generated documentation, and conversions to
other media types.
"Work" shall mean the work of authorship, whether in Source or Object form, made available under
the License, as indicated by a copyright notice that is included in or attached to the work (an example
is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or
derived from) the Work and for which the editorial revisions, annotations, elaborations, or other
modifications represent, as a whole, an original work of authorship. For the purposes of this License,
Derivative Works shall not include works that remain separable from, or merely link (or bind by name)
to the interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version of the Work and any
modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to
Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity
authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted"
means any form of electronic, verbal, or written communication sent to the Licensor or its
representatives, including but not limited to communication on electronic mailing lists, source code
control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for
the purpose of discussing and improving the Work, but excluding communication that is
conspicuously marked or otherwise designated in writing by the copyright owner as "Not a
Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution
has been received by Licensor and subsequently incorporated within the Work.
6
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform,
sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby
grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as
stated in this section) patent license to make, have made, use, offer to sell, sell, import, and
otherwise transfer the Work, where such license applies only to those patent claims licensable by
such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of
their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent
litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the
Work or a Contribution incorporated within the Work constitutes direct or contributory patent
infringement, then any patent licenses granted to You under this License for that Work shall terminate
as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in
any medium, with or without modifications, and in Source or Object form, provided that You meet the
following conditions:
1. You must give any other recipients of the Work or Derivative Works a copy of this License; and
2. You must cause any modified files to carry prominent notices stating that You changed the files;
and
3. You must retain, in the Source form of any Derivative Works that You distribute, all copyright,
patent, trademark, and attribution notices from the Source form of the Work, excluding those
notices that do not pertain to any part of the Derivative Works; and
4. If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that
You distribute must include a readable copy of the attribution notices contained within such
NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at
least one of the following places: within a NOTICE text file distributed as part of the Derivative
Works; within the Source form or documentation, if provided along with the Derivative Works; or,
within a display generated by the Derivative Works, if and wherever such third-party notices
normally appear. The contents of the NOTICE file are for informational purposes only and do not
modify the License. You may add Your own attribution notices within Derivative Works that You
distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such
additional attribution notices cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional or
different license terms and conditions for use, reproduction, or distribution of Your modifications,
or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of
the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally
submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of
this License, without any additional terms or conditions. Notwithstanding the above, nothing herein
shall supersede or modify the terms of any separate license agreement you may have executed with
Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service
marks, or product names of the Licensor, except as required for reasonable and customary use in
describing the origin of the Work and reproducing the content of the NOTICE file.
7
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides
the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without
limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or
FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness of using or redistributing the Work and assume any risks associated with Your
exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence),
contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent
acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct,
indirect, special, incidental, or consequential damages of any character arising as a result of this
License or out of the use or inability to use the Work (including but not limited to damages for loss of
goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages
or losses), even if such Contributor has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof,
You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other
liability obligations and/or rights consistent with this License. However, in accepting such obligations,
You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other
Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any
liability incurred by, or claims asserted against, such Contributor by reason of your accepting any
such warranty or additional liability.
END OF TERMS AND CONDITIONS
---- Part 1: CMU/UCD copyright notice: (BSD like) -----
Copyright 1989, 1991, 1992 by Carnegie Mellon University
Derivative Work - 1996, 1998-2000
Copyright 1996, 1998-2000 The Regents of the University of California
All Rights Reserved
Permission to use, copy, modify and distribute this software and its documentation for any purpose and
without fee is hereby granted, provided that the above copyright notice appears in all copies and that both
that copyright notice and this permission notice appear in supporting documentation, and that the name of
CMU and The Regents of the University of California not be used in advertising or publicity pertaining to
distribution of the software without specific written permission.
CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU OR THE REGENTS OF THE
UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
---- Part 2: Networks Associates Technology, Inc copyright notice (BSD) -----
Copyright (c) 2001-2003, Networks Associates Technology, Inc
All rights reserved.
8
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may be
used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) -----
Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) -----
Copyright c 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All
rights reserved.
9
Use is subject to license terms below.
This distribution may include materials developed by third parties.
Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---- Part 5: Sparta, Inc copyright notice (BSD) -----
Copyright (c) 2003-2012, Sparta, Inc
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
10
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---- Part 6: Cisco/BUPTNIC copyright notice (BSD) -----
Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and
Telecommunications.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of Cisco, Inc, Beijing University of Posts and Telecommunications, nor the names of
their contributors may be used to endorse or promote products derived from this software without specific
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---- Part 7: Fabasoft R&D Software GmbH & Co KG copyright notice (BSD) -----
Copyright (c) Fabasoft R&D Software GmbH & Co KG, 2003 oss@fabasoft.com
Author: Bernhard Penz <bernhard.penz@fabasoft.com>
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* The name of Fabasoft R&D Software GmbH & Co KG or any of its subsidiaries, brand or product names
may not be used to endorse or promote products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
11
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
---- Part 8: Apple Inc. copyright notice (BSD) -----
Copyright (c) 2007 Apple Inc. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of Apple Inc. ("Apple") nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS "AS IS" AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
---- Part 9: ScienceLogic, LLC copyright notice (BSD) -----
Copyright (c) 2009, ScienceLogic, LLC
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of ScienceLogic, LLC nor the names of its contributors may be used to endorse or
promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE
12
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
LEADTOOLS
Copyright (C) 1991-2009 LEAD Technologies, Inc.
CMap Resources
-----------------------------------------------------------
Copyright 1990-2009 Adobe Systems Incorporated.
All rights reserved.
Copyright 1990-2010 Adobe Systems Incorporated.
All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
Neither the name of Adobe Systems Incorporated nor the names
of its contributors may be used to endorse or promote
products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-----------------------------------------------------------
13
MIT License
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
associated documentation files (the "Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial
portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Written by Joel Sherrill <joel@OARcorp.com>.
COPYRIGHT (c) 1989-2000.
On-Line Applications Research Corporation (OAR).
Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby
granted, provided that this entire notice is included in all copies of any software which is or includes a
copy or modification of this software.
THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY.
IN PARTICULAR, THE AUTHOR MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND
CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE.
(1) Red Hat Incorporated
Copyright (c) 1994-2009 Red Hat, Inc. All rights reserved.
This copyrighted material is made available to anyone wishing to use, modify, copy, or redistribute it
subject to the terms and conditions of the BSD License. This program is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY expressed or implied, including the implied warranties of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. A copy of this license is available at
documentation are not subject to the BSD License and may only be used or replicated with the express
permission of Red Hat, Inc.
(2) University of California, Berkeley
Copyright (c) 1981-2000 The Regents of the University of California.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
14
* Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
* Neither the name of the University nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The following applies only to products supporting Wi-Fi.
(c) 2009-2013 by Jeff Mott. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list of conditions, and the
following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the
following disclaimer in the documentation or other materials provided with the distribution.
* Neither the name CryptoJS nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS,"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
15
What Is My Image Garden?
17
My Image Garden Features
My Image Garden is an application for utilizing photos taken with digital cameras and other images saved on
your computer.
Features at Glance
Note
• File formats available in My Image Garden vary by function. For details, see File Formats.
Getting Layout Suggestions from My Image Garden
My Image Garden employs a technology called "Image Assorting Technology" that provides the following
functions.
• An image analysis function to group images by person by detecting faces in photos, and to register
images and videos to a calendar automatically based on the shooting date and time.
• An item recommendation function that automatically recommends layouts for analyzed images.
This technology makes it easy to create and print various items such as collages and cards.
Utilizing the Item Recommendation Function
Automatically Organize Photos
Images analyzed in My Image Garden appear in the Unregistered People view or grouped by person in
the People view. They also appear in the Calendar view based on the shooting date and time. Register
people's profiles or event information to organize a large number of images or to search quickly for the
images you want.
18
Registering People
Registering Events
Print Photos and Documents
Preview your favorite photos easily before you print. Documents saved as PDF files can also be printed.
Print Personalized Items
Combine your favorite photos with preset templates to create and print personalized items such as
collages and cards.
19
Print Disc Labels (CD/DVD/BD)
Create and print personalized disc labels (CD/DVD/BD) from your favorite photos.
Capture and Print Still Images from Videos
Select your favorite scenes from videos and print them as still images.
Capturing and Printing Still Images from Videos
20
Scan Photos and Documents
Scan photos and documents easily by automatically detecting the item type.
Correct/Enhance Photos
Correct red eye or adjust the brightness and contrast of images.
Note
• In My Image Garden, there are many methods for selecting images, PDF files, and videos. For
21
Selecting Images, PDF Files, and Videos
In My Image Garden, there are many screens for selecting images, PDF files, and videos. You can select
images, PDF files, or videos by clicking the thumbnails displayed in the screens. White frames appear
around the selected files.
Important
• For PDF files, only those created in My Image Garden or IJ Scan Utility are supported. PDF files
created or edited in other applications are not supported.
• You cannot print images and PDF files at the same time. Print images and PDF files separately.
• To select multiple files in the same folder at the same time, click the thumbnails of images, PDF files, or
videos while pressing the Ctrl key or Shift key. You cannot select images in different folders or views at
the same time.
Note
• You can also select still images by capturing them from videos.
Capturing and Printing Still Images from Videos
• You can also select images downloaded from photo sharing sites on the Internet.
Downloading Images from Photo Sharing Sites
• For videos, only MOV or MP4 format videos recorded with Canon digital cameras or digital camcorders
appear.
Calendar View (Images, PDF Files, and Videos)
In Month View:
When you click Calendar, the view switches to Calendar set to Month View and a thumbnail of one of
the images or PDF files registered to the date appears for each date. When you click a thumbnail, all
images, PDF files, and videos contained in the date will be selected.
22
Note
• Click a date and select Select All from the Edit menu to select all dates of the month.
In Day View:
When you click Day View in the Calendar view set to Month View, the view switches to Calendar set to
Day View, and images, PDF files, and videos appear as thumbnails by date.
23
Note
• Click a thumbnail of an image or PDF file and select Select All from the Edit menu to select all
images, PDF files, and videos of the date.
Event View (Images, PDF Files, and Videos)
When you click Event, the view switches to Event and the registered events with their representative
images appear as thumbnails. When you click a thumbnail, all images contained in the event will be
selected.
Note
• Select Select All from the Edit menu to select all events.
In Expanded display:
When you click an event name displayed below Event, or double-click an event in the Event view,
images, PDF files, and videos contained in the event appear as thumbnails.
24
Note
• Double-clicking an event label in the Month View calendar also displays images, PDF files, and
videos contained in the event as thumbnails.
• Select Select All from the Edit menu to select all images, PDF files, and videos.
People View (Images)
When you click People, the view switches to People and the images of registered people appear as
thumbnails. When you click a thumbnail, all images contained in the person will be selected.
25
Note
• Select Select All from the Edit menu to select all people.
In Expanded display:
When you click a name displayed below People, or double-click a person in the People view, the view
switches to the expanded display of People and the images registered to the person appear as
thumbnails.
Note
• Select Select All from the Edit menu to select all images.
Unregistered People View (Images)
When you click Unregistered People, the view switches to Unregistered People and images detected
as a result of image analysis appear as thumbnails.
26
Note
• Click a smaller thumbnail to select all images that are automatically organized as those of the same
person.
• Click a thumbnail of an image and select Select All from the Edit menu to select all images that are
automatically organized as those of the same person.
• Identifying people appears at Unregistered People in Global Menu on the left side of the screen
during image analysis.
Folder View (Images, PDF Files, and Videos)
When you select a folder in the folder tree, images, PDF files, and videos in the folder appear as
thumbnails.
27
Starting My Image Garden
My Image Garden can be started in the following ways.
• Click
(Start My Image Garden) on Quick Menu
• Double-click
Canon My Image Garden on the desktop
• Start from the Programs folder
Windows 10:
From Start menu, select All apps > Canon Utilities > My Image Garden.
Windows 8.1/Windows 8:
Select My Image Garden on the Start screen to start My Image Garden.
If My Image Garden is not displayed on the Start screen, select the Search charm, and then search for
"My Image Garden."
Windows 7/Windows Vista:
From Start menu, select All Programs > Canon Utilities > My Image Garden > My Image Garden.
Note
• My Image Garden analyzes the images in the registered folders and displays them in the Calendar
view, Unregistered People view, or People view, or uses them in recommended layouts that appear in
Image Display.
Folders can be registered in the screen that appears when starting My Image Garden for the first time
or in the Preferences dialog box. The Pictures folder is selected by default.
• To change the folders that are subject to image analysis, see Image Analysis Settings Tab.
29
• If you are using ImageBrowser EX Ver.1.2.1 or later, My Image Garden can be started from
ImageBrowser EX.
30
Printing Photos and Documents
Print your favorite photos easily.
Documents (PDF files) created in My Image Garden can also be printed.
1. Make sure printer is turned on.
3. From Guide Menu screen, click Photo Print.
5. Click Print.
32
The Print Settings dialog box appears.
Note
• An example of printing from the folder view.
• When printing a password-protected PDF file, you need to enter the password.
Opening/Editing Password-protected PDF Files
6. Specify number of copies to print, printer and paper to use, and other settings.
33
Note
• For details on the Print Settings dialog box, see Print Settings Dialog Box.
7. Load paper.
8. Click Print.
Important
• If you print a large number of high resolution images at one time, printing may pause halfway
through.
• If you print in a bordered layout, the margins on the left and right or the top and bottom may
become wider than the other.
Note
• Images can be corrected or enhanced before printing as needed.
Enhancing Photos Using Special Filters
• Colors may fade with time if the printed paper is left for a long period of time.
After printing, dry the paper sufficiently, and then store or display indoors at room temperature and
normal humidity, avoiding high temperatures, high humidity, and direct sunlight.
To avoid direct exposure to air, we recommend that you store the paper in an album, plastic folder,
photo frame, or other container.
34
Printing Disc Labels (CD/DVD/BD)
Create and print personalized disc labels (CD/DVD/BD) from your favorite photos.
Note
• This function is available on supported models only.
Important
• Do not set the disc tray until a message prompting you to load a printable disc appears. Loading a
printable disc while the printer is in operation may damage the printer.
• To set or remove the disc tray, click Home to return to the top page of the Online Manual for your model
and search for "Placing a Printable Disc."
2. From Guide Menu screen, click Disc Label.
The Set Design and Paper dialog box appears.
35
3. Specify settings such as design and Paper Size, and then click OK.
The disc label (CD/DVD/BD) appears in the Item edit screen.
Note
• The layout may not be as expected depending on the photo information or analysis results of the
selected images.
4. From Add Image, select image(s) you want to use for disc label (CD/DVD/BD).
The image(s) appear in the Materials area.
5. Drag image from Materials area, and drop it to desired layout frame.
When you move an image to a layout frame, an arrow icon appears on the image.
36
6. Edit item according to preference.
Note
• The print area can be set in the Advanced Settings dialog box displayed by clicking Advanced...
at the bottom of the screen. If Advanced... is not displayed, click (Right Scroll).
• In cases such as when Identifying people appears at Unregistered People in Global Menu on
the left side of the screen, the result may not be as expected since automatic placement does not
apply to images for which analysis has not been completed.
• To swap automatically placed images, see Inserting Images.
37
7. Click Print at bottom right of screen.
The Print Settings dialog box appears.
8. Specify number of copies to print, printer and paper to use, and other settings.
Note
• For details on the Print Settings dialog box, see Print Settings Dialog Box.
9. Click Print.
When a message appears, set the disc tray.
38
Note
• The displayed screen varies depending on your model.
Related Topic
Item Edit Screen
39
Creating and Printing Items
You can easily create personalized items using your favorite photos and print them.
Select an image or images in the Calendar view, Event view, People view, Unregistered People view, or
folder view, then click New Art at the bottom of the screen to select the item you want to create.
Note
• You can also insert images by selecting the type and design of your item from the Create or Open
Items view.
You can create and print items such as the following.
You can print your favorite photos with dates or in a variety of layouts.
Printing Collages
You can create collages using your favorite photos and print them.
Printing Cards
You can create cards for anniversaries and annual events using your favorite photos and print them.
40
Printing Calendars
You can create personalized calendars using your memorable photos and print them.
Printing Stickers
You can create personalized stickers by printing your favorite photos on sticker sheets.
Printing in a Cinematic Layout
You can print your favorite photos in a layout that resembles a film or theater.
41
Printing Paper Crafts
You can print downloaded PREMIUM Contents (paper crafts) and create three-dimensional art.
42
Printing Photos in a Variety of Layouts
You can print your favorite photos with dates or in a variety of layouts.
2. Click Photo Layout from the Guide Menu screen.
The Set Design and Paper dialog box appears.
3. Specify settings such as design and Paper Size, and then click OK.
43
The selected design appears in the Item edit screen.
Note
• The layout may not be as expected depending on the photo information or analysis results of the
selected images.
4. Select the image(s) you want to print from Add Image.
The image(s) appear in the Materials area.
5. Drag image in Materials area, and then drop it to layout frame of item.
When you move an image to a layout frame, an arrow icon appears on the image.
44
6. Edit item according to preference.
Note
• In cases such as when Identifying people appears at Unregistered People in Global Menu on
the left side of the screen, the result may not be as expected since automatic placement does not
apply to images for which analysis has not been completed.
• To swap automatically placed images, see Inserting Images.
7. Add the date according to your preference.
Select the image to which you want to add the date to display the image editing tool. Click Add date to
place a checkmark; the date is added to the image.
Note
• In the Advanced Settings dialog box displayed by clicking Advanced... at the bottom of the
screen, you can make advanced settings to the text of the date to be printed or set to print dates
on all images. When using an ID photo design, you can also add the same image to all frames
within the page or apply the angle and size set to an image to all copies of the same image within
the page. If Advanced... is not displayed, click (Right Scroll).
8. Click Print at bottom right of screen.
The Print Settings dialog box appears.
9. Specify number of copies to print, printer and paper to use, and other settings.
45
Note
• For details on the Print Settings dialog box, see Print Settings Dialog Box.
10. Click Print.
Related Topic
Item Edit Screen
46
Using Various Functions
Editing Items
Setting the Design and Main People
Inserting Images
47
Scanning Photos and Documents
Use My Image Garden to scan photos, documents, and other items easily.
Cropping Scanned Images
Note
• Use the Stitch function from the Scan view to scan the left and right halves of an item larger than the
platen and combine the scanned images back into one image. For more details, click Home to return to
the top page of the Online Manual for your model and search for "Scanning Items Larger than the
Platen (Image Stitch)."
• Click Driver in the Scan view to start ScanGear (scanner driver) and scan by specifying the output size,
image corrections, and other settings. For more details, click Home to return to the top page of the
Online Manual for your model and search for "Scanning Using Application Software (ScanGear)."
48
Easy Scanning with Auto Scan
You can scan easily by automatically detecting the item type.
1. Make sure that your scanner or printer is turned on.
2. Place the item on the platen or ADF (Auto Document Feeder) of your scanner or printer.
Note
• For how to place items, click Home to return to the top page of the Online Manual for your model
and search for "Placing Items (When Scanning from a Computer)."
4. Click Scan from the Guide Menu screen.
The view switches to Scan.
Note
• Clicking Scan from the Global Menu in the Main Screen also switches the view to Scan.
5. Click Auto.
49
Scanning starts.
Note
• To specify the scan settings, click Home to return to the top page of the Online Manual for your
model and search for "Settings (Auto Scan) Dialog Box."
• Click Cancel to cancel the scan.
When scanning is completed, the image appears as a thumbnail.
Note
• You can rotate the selected image 90 degrees clockwise each time you click Rotate.
50
• You can crop images.
Cropping Scanned Images
• Click Save to save rotated or cropped scanned images.
Save Dialog Box (Scan View)
• You can set the save location for scanned images on the Advanced Settings tab of the
Preferences dialog box displayed by selecting Preferences... from the Tools menu. Refer to
"Advanced Settings Tab" for details on the setting procedure.
Note
• You can also print scanned images. Right-click a thumbnail and select Print... from the displayed menu
to display the Print Settings dialog box. Select the printer and paper to use, then click Print.
Related Topic
Scan View
51
Scanning Photos
You can scan with settings suitable for photos.
Note
• You can even scan two or more photos (small items) at one time. For more details, click Home to return
to the top page of the Online Manual for your model and search for "Scanning Multiple Items at One
Time."
1. Place the item on the platen.
Note
• For how to place items, click Home to return to the top page of the Online Manual for your model
and search for "Placing Items (When Scanning from a Computer)."
3. Click Scan from the Guide Menu screen.
The view switches to Scan.
Note
• Clicking Scan from the Global Menu in the Main Screen also switches the view to Scan.
4. Click Photo.
52
Scanning starts.
Note
• Click Cancel to cancel the scan.
When scanning is completed, the image appears as a thumbnail.
Note
• You can rotate the selected image 90 degrees clockwise each time you click Rotate.
• You can crop images.
Cropping Scanned Images
53
• Click Save to save rotated or cropped scanned images.
Save Dialog Box (Scan View)
• You can set the save location for scanned images on the Advanced Settings tab of the
Preferences dialog box displayed by selecting Preferences... from the Tools menu. Refer to
"Advanced Settings Tab" for details on the setting procedure.
Note
• You can also print scanned images. Right-click a thumbnail and select Print... from the displayed menu
to display the Print Settings dialog box. Select the printer and paper to use, then click Print.
Related Topic
Scan View
54
Scanning Documents
You can scan with settings suitable for documents.
Note
• You can even scan two or more small items at one time. For more details, click Home to return to the
top page of the Online Manual for your model and search for "Scanning Multiple Items at One Time."
1. Place the item on the platen or ADF (Auto Document Feeder).
Note
• For how to place items, click Home to return to the top page of the Online Manual for your model
and search for "Placing Items (When Scanning from a Computer)."
3. Click Scan from the Guide Menu screen.
The view switches to Scan.
Note
• Clicking Scan from the Global Menu in the Main Screen also switches the view to Scan.
4. Click Document.
55
Scanning starts.
Note
• Click Cancel to cancel the scan.
When scanning is completed, the image appears as a thumbnail.
Note
• Click Save to save scanned images.
Save Dialog Box (Scan View)
56
• You can set the save location for scanned images on the Advanced Settings tab of the
Preferences dialog box displayed by selecting Preferences... from the Tools menu. Refer to
"Advanced Settings Tab" for details on the setting procedure.
Note
• You can also print scanned images. Right-click a thumbnail and select Print... from the displayed menu
to display the Print Settings dialog box. Select the printer and paper to use, then click Print.
Related Topic
Scan View
57
Scanning with Favorite Settings
You can scan with your favorite, frequently used settings by saving them beforehand.
Note
• You can save your favorite settings in the dialog box displayed by clicking Settings. For more details,
click Home to return to the top page of the Online Manual for your model and search for "Settings
(Custom Scan) Dialog Box."
1. Place the item on the platen or ADF (Auto Document Feeder).
3. Click Scan from the Guide Menu screen.
The view switches to Scan.
Note
• Clicking Scan from the Global Menu in the Main Screen also switches the view to Scan.
4. Click Custom.
58
Scanning starts.
Note
• Click Cancel to cancel the scan.
When scanning is completed, the image appears as a thumbnail.
Note
• You can rotate the selected image 90 degrees clockwise each time you click Rotate.
• You can crop images.
Cropping Scanned Images
59
• Click Save to save rotated or cropped scanned images.
Save Dialog Box (Scan View)
• You can set the save location for scanned images on the Advanced Settings tab of the
Preferences dialog box displayed by selecting Preferences... from the Tools menu. Refer to
"Advanced Settings Tab" for details on the setting procedure.
Note
• You can also print scanned images. Right-click a thumbnail and select Print... from the displayed menu
to display the Print Settings dialog box. Select the printer and paper to use, then click Print.
Related Topic
Scan View
60
Correcting/Enhancing Photos
You can correct red eyes or adjust the brightness and contrast of images.
Select an image or images in the Edit area of the Item edit screen, the Calendar view set to Day View, the
expanded display of the Event view, the expanded display of the People view, the Unregistered People
view, or folder view, then click Correct/Enhance at the bottom of the screen to display the Correct/
Enhance Images window. You can make the following corrections and enhancements in the Correct/
Enhance Images window.
Important
• This function is not available when a PDF file is selected.
• Correction/enhancement may not be possible due to insufficient memory depending on the size of the
selected image.
Auto Photo Fix
You can automatically apply corrections suitable for photos based on the analysis of the shot scene.
Using Auto Photo Fix
Red-Eye Correction
You can reduce red eye caused by a camera flash.
Using Red-Eye Correction
Face Brightener
You can brighten dark faces caused by bright background.
Using Face Brightener
61
Face Sharpener
You can sharpen out-of-focus faces.
Using Face Sharpener
Digital Face Smoothing
You can enhance skin beautifully by reducing blemishes and wrinkles.
Using Digital Face Smoothing
Blemish Remover
You can reduce moles.
Using Blemish Remover
Image Adjustment
You can adjust brightness and contrast, sharpen the entire image, etc.
62
You can also blur the outline of the subjects or remove the base color.
Adjusting Images
Crop
You can select the area you want to keep in an image and discard the rest.
Related Topic
Correct/Enhance Images Window
63
Cropping Photos
Cropping is the act of selecting the area you want to keep in an image and discarding the rest.
Important
• This function may not be available when PREMIUM Contents are used.
• Images cannot be cropped while editing items.
2. Click Correct/Enhance at the bottom of the screen.
The Correct/Enhance Images window appears.
3. Click
(Crop).
The Crop window appears.
4. Drag the white squares on the image to specify the area to be cropped, then click OK.
64
Note
• Click Reset Selected Image in the Correct/Enhance Images window to undo all enhancements.
Related Topic
Crop Window
65
Creating/Editing PDF Files
You can create PDF files from images saved on a computer. You can also add pages to or delete pages
from the created PDF files and rearrange pages.
Important
• You can create or edit up to 99 pages of a PDF file at one time.
• For PDF files, only those created in My Image Garden or IJ Scan Utility are supported. PDF files
created or edited in other applications are not supported.
Note
• File formats that can be selected are PDF, JPEG, TIFF, and PNG.
• When a password-protected PDF file is selected, you need to enter the password.
Opening/Editing Password-protected PDF Files
Important
• You cannot use images whose number of pixels in the vertical or horizontal direction is 10501 or
more.
2. Click Create/Edit PDF File at the bottom of the screen.
The view switches to Create/Edit PDF File.
3. Add or delete pages as required.
66
When adding existing images or PDF files:
Click Add Page at the bottom of the screen. After the Open dialog box appears, select the image(s) or
PDF file(s) you want to add, then click Open.
When deleting pages:
Select the image(s), then click Delete Page at the bottom of the screen.
4. Change the page order as required.
You can change the page order by clicking a page then using Move to First, Move Up, Move Down, or
Move to Last at the bottom left of the screen.
You can also change the page order by dragging and dropping a page to the target location.
5. Click Save or Save All.
When saving only the selected page(s):
Click Save to display the Save dialog box.
When saving all pages:
Click Save All to display the Save dialog box.
6. Specify the save settings.
Save Dialog Box (Create/Edit PDF File View)
Important
• If a password-protected PDF file is edited, the passwords will be deleted. Reset the passwords in
the Save dialog box.
Setting Passwords for PDF Files
7. Click Save.
The PDF file(s) is (are) saved, and the Create/Edit PDF File view reappears.
8. Click Close.
The Create/Edit PDF File view closes.
The
(PDF) mark appears on the upper left of the thumbnails of saved PDF files.
Related Topic
Create/Edit PDF File View
67
Extracting Text from Images (OCR Function)
Scan text in images and display it in Notepad (included with Windows).
Important
• PDF files cannot be converted to text.
• Text conversion may not be possible depending on the size of the selected image.
2. Right-click the image you want to convert into text, then click OCR from the displayed
menu.
Notepad (included with Windows) starts and editable text appears.
Note
• Only text written in languages that can be selected in the Advanced Settings tab of the
Preferences dialog box can be extracted to Notepad (included with Windows). Click Settings...
on the Advanced Settings tab and specify the language according to the language of the
document to be scanned.
When scanning multiple documents, you can collect the extracted text into one file.
• Text displayed in Notepad (included with Windows) is for guidance only. Text in the image of the
following types of documents may not be detected correctly.
• Documents containing text with font size outside the range of 8 points to 40 points (at 300 dpi)
• Slanted documents
• Documents placed upside down or documents with text in the wrong orientation (rotated
characters)
• Documents containing special fonts, effects, italics, or hand-written text
• Documents with narrow line spacing
68
• Documents with colors in the background of text
• Documents containing multiple languages
69
Troubleshooting
How Can I Change the Settings of My Image Garden?
You can change the settings of My Image Garden in the Preferences dialog box.
Images Do Not Appear
Image analysis is performed immediately after installation. Therefore, images may not appear in the
Calendar view or Unregistered People view until the image analysis is completed.
Note
• Identifying people appears at Unregistered People in Global Menu on the left side of the screen
during image analysis.
To display images in the Calendar view, Unregistered People view or People view, or to use the item
recommendation function, the folders in which the images are saved need to be subject to image analysis.
Make sure that the folders in which the images are saved are subject to image analysis on the Image
Analysis Settings tab of the Preferences dialog box.
Image Analysis (Face Identification) Fails
Adjust the face identification rate and other settings on the Image Analysis Settings tab of the
Preferences dialog box.
Cannot Scan Properly
For more details, click Home to return to the top page of the Online Manual for your model and search for
"Problems with Scanning."
Cannot Use PREMIUM Contents
Refer to "Cannot Use PREMIUM Contents" for details.
70
|
