BLAUPUNKT TEXAS 600 User Manual

CAR MULTIMEDIA  
TEXAS 600  
AV  
Enjoy it.  
Operating and installation instruction  
Controls - Remote control  
ConRtreoml oPtaenCelontrol  
11. Return to the home menu  
12. Eject the disc  
11  
12  
13  
14  
15  
16  
17  
18  
25  
26  
27  
28  
29  
30  
31  
32  
13. Access to tuner source  
14. Access to disc source  
15. - Search an available radio station by  
decreasing tuning frequency  
- Select the previous chapter/track for playback  
16. Select radio band  
17. - Zoom in (Picture menu of CD/USB/SD)  
- Access to music list (Audio menu of music  
playing)  
18. Adjust screen settings  
19. Open EQ menu  
33  
19  
34  
20  
21  
22  
35  
36  
20. Menu cursor  
21. Enter  
22. - Open route menu (DVD)  
- Turns on/off PBC (VCD)  
23. Digit area  
37  
38  
24. Repeat playback  
23  
24  
25. Change to next source  
26. Power on/off  
27. Access to Bluetooth source  
28. Access to USB source  
39  
40  
41  
29. Pause playback/Start playback  
30. - Search an available radio station by  
increasing tuning frequency  
- Select the next chapter/track for playback  
31. - Playback disc in different angle for a  
scene (DVD)  
- Rotate (photo playing)  
- Access to video list  
32. - Language selection for subtitle (DVD)  
- Access to photo list  
33. Change the sound channel for disc playback  
34. Increase/Decrease volume  
35. Access to settings source  
36. Mute On/Off Audio Output  
37. Activate direct access mode  
38. Dial/Receive a call  
39. Hang up  
40. Play all chapter/tracks in random order  
41. - Press to clear the number one by one  
- Hold to clear all the numbers  
3
Controls  
Placing the device in operation................... 5  
Turn on/off the power ........................................... 5  
Mute............................................................................. 5  
Adjust the Volume................................................... 5  
Playing Source Selection ...................................... 5  
Main Menu................................................................. 5  
Setting the reception area ................................... 5  
Radio mode................................................... 6  
Start radio mode...................................................... 6  
Select One Radio Band.......................................... 6  
Tune.............................................................................. 6  
Storing stations manually ................................... 7  
Storing stations automatically (Travelstore).. 7  
Scanning stations ................................................... 7  
Adjusting the seek tuning sensitivity............... 7  
DVD/CD/USB media playback ..................... 7  
Sound settings............................................ 13  
Select Preset Equalizer ........................................13  
Adjust FAD BAL ...................................................13  
AUX Operations .......................................... 13  
Basic Settings.............................................. 14  
General......................................................................14  
Video..........................................................................14  
Sound ........................................................................14  
Time............................................................................14  
Language .................................................................14  
Bluetooth .................................................................14  
Volume ......................................................................14  
Notes of connection ................................... 15  
Scope of delivery ....................................... 15  
Connection diagram................................... 16  
Troubleshooting ......................................... 17  
Supported formats ..................................... 18  
Insert a Disc............................................................... 7  
Eject the Disc............................................................. 7  
Connect a USB Device ........................................... 7  
Remove a USB Device............................................ 7  
Insert/Remove a SD Card...................................... 7  
Touch Screen Controls........................................... 7  
DVD movie playback.............................................. 8  
Audio playback from DVD/CD, USB or  
microSDHC.................................................................... 8  
Video playback from DVD/CD, USB or  
microSDHC.................................................................... 9  
Image playback from DVD/CD, USB or  
audioSDHC..................................................................10  
Bluetooth mode......................................... 10  
Pair the Bluetooth-enabled Devices...............10  
Disconnect Bluetooth Device...........................11  
Make a Call...............................................................11  
Answer an Incoming Call....................................11  
Adjust Bluetooth Settings..................................11  
Music Mode.............................................................12  
PhoneLink ................................................... 12  
Overview of PhoneLink.......................................12  
Connect with Android phone...........................12  
Connect with iPhone ...........................................13  
4
Startup  
Main Menu  
In the main menu, you press the buttons on the  
touch-screen to call up the different sources and  
operating modes.  
Placing the device in operation  
Caution!  
Transport securing screws  
Ensure that the transport securing screws at the  
top side of the device are removed before the  
startup of the device.  
Press the [  
menu.  
] button to enter main source  
Turn on/off the power  
Press and release [  
unit on.  
] button to turn the  
Press and hold the [  
unit off.  
] button to turn the  
Note:  
The unit will power on in the same state it was  
in when powered off.  
1
3
4
2
1. Enter setting mode.  
2. Function icons  
3. Clock  
Mute  
Press the [ ] button to mute the sound.  
Note:  
Pressing the [  
volume will unmute.  
4. Touch to access Equalizer level settings menu.  
] button again or adjusting  
Setting the reception area  
This car sound system is designed for operation in  
different regions with different frequency ranges  
and station technologies. The factory default  
of the reception area is "ASIA (FM/AM)". If you  
operate the car sound system outside of Asia, you  
may first have to set a suitable reception area in  
the menu:  
Adjust the Volume  
Press the [  
] or [  
] button to increase or  
decrease the volume level.  
The adjustable range of volume is 0 to 50.  
Playing Source Selection  
In the main menu, press the [  
The Settings menu is displayed.  
In the bottom area of the Settings menu,  
press the [ General ] button.  
The current setting is displayed behind  
“Radio region.  
] button.  
Press the [  
] button on the panel to show  
main source menu.  
Touch desired icon on the the screen to  
enter corresponding working mode, such as  
Disc, Radio, etc.  
Drag left/right to scroll.  
Tap twice (double-click) on the [ Radio  
region ] button to display the list of available  
reception areas.  
Select the desired reception area by double-  
clicking.The list is hidden, the selected  
reception area is set.  
Note:  
When some devices are not ready, they  
cannot be selected.  
You should stop switching when the playing  
source you desired has been selected and  
wait for some seconds, the unit will auto enter  
the playing source mode you have selected.  
Press the [ ] button. The main menu is  
displayed again.  
5
Radio mode  
Select One Radio Band  
Touch the [ ] icon on the user interface to select  
one radio band among FM1, FM2, FM3, AM1 and  
AM2.  
Radio mode  
Start radio mode  
In the main menu, press the [ Radio ] button.  
The radio playback menu is displayed.  
Tune  
Auto Tuning  
Hold [ ] / [ ] icon on the user interface  
more than 2 second to seek a higher / lower  
station.  
12  
To stop searching, repeat the operation above or  
press other buttons having radio functions.  
Note:  
When a station is received, searching stops and  
the station is played.  
1. Return to home menu  
2. Current radio band  
3. Current preset radio station  
4. Current frequency  
Manual Tuning  
Method 1:  
During manual tuning, the frequency will be  
changed in steps.  
5. Clock  
6. Broadcaster information stored at the preset  
7. Band switch  
8. Tune backward  
Touch the [  
interface to tune in a higher / lower station.  
] / [  
] icon on the user  
Auto tune backward. (long press)  
9. Search stations automatically  
10. Tune forward  
Method 2:  
Press the [  
] button to display additional  
operating options.  
Auto tune forward. (long press)  
11. Touch to view more on-screen buttons  
12. LO/DX Seeking  
Press the [ ] button.  
A numeric keypad is displayed for the  
frequency input.  
13  
14  
15  
13. Touch for quick access to Equalizer level  
settings  
14. Enter frequency directly  
15. Storing stations automatically  
Enter the frequency of the desired station  
with the numeric keypad.  
Press the [ OK ] button.  
The radio playback menu is displayed, the  
station of the frequency entered is played  
back.  
6
Radio mode DVD/CD/USB media playback  
Storing stations manually  
Insert a Disc  
Insert a disc into the slot, and the unit will change  
to disc mode automatically.  
Select the desired memory bank with the  
[
] button.  
Set the desired station.  
Press one of the memory buttons [ P1 ] -  
[ P6 ] for approx. 2 seconds to store the  
current station at the button.  
The station is stored.  
Notes:  
Please confirm whether there is a disc in the unit  
before you insert another one.  
The unit will exit current playing source and  
enter DVD mode when one disc is inserted.  
The following disc formats are supported: CD-R,  
CD-RW, DVD-R, DVD+R, DVD-RW, DVD + RW .  
Storing stations automatically  
(Travelstore)  
With Travelstore, you can automatically search for  
and store the 6 FM stations off ering the strongest  
reception in the region in the current memory  
bank. Any previously stored stations in this  
memory bank are deleted in the process.  
Select a memory bank.  
Eject the Disc  
Press [ ] on the panel to eject the disc.  
Notes:  
After ejecting the disc, the unit reverts to  
another source automatically.  
If the disc is not removed from the unit within  
10 seconds, the disc will be reloaded to prevent  
accidental damage.  
Press the [  
] button to display additional  
operating options.  
Press the [ TS ] button.  
The tuner starts the automatic station seek tuning.  
After the storing is completed, the radio plays the  
station at memory location 1 of the previously  
selected memory bank.  
Connect a USB Device  
Open the USB door.  
Insert the USB device into the USB slot.  
Play starts automatically.  
Scanning stations  
You can use the scan function to play all the  
receivable stations of the current waveband for a  
few seconds.  
Remove a USB Device  
Select another source in the main menu.  
Remove the USB device.  
Press the [  
] button.The seek tuning  
searches for stations in the current waveband.  
Each receivable station is played for a few  
seconds in the process.  
Insert/Remove a SD Card  
Insert  
Insert the SD card into the SD card slot, the  
unit will read the files automatically.  
Pressing the [  
] button again selects the  
currently scanned station and plays it back.  
Remove  
Adjusting the seek tuning sensitivity  
The seek tuning sensitivity decides whether the  
automatic station seek tuning fi nds only strong  
stations or also weaker stations that may be noisy.  
Press the [ LO ] or [ DX ] button to adjust the  
sensitiv-ity of station seek tuning.  
Select another source in the main menu.  
Press the card until you hear a click sound.  
Remove the SD card.  
Touch Screen Controls  
The touch areas for video/picture playback are  
outlined below:  
If LO is displayed, only stations with a strong  
signal are found during seek tuning.  
If DX is displayed, stations with a strong and  
weak signal are found during seek tuning.  
A
B
C
A: Return to the main menu  
B: Play the video and display playback  
7
DVD/CD/USB media playback  
Audio playback from DVD/CD, USB  
or microSDHC  
The principles of audio playback (MP3/WMA)  
from data carriers are identical for all sources.  
Select the desired source via the main menu.  
The device changes to the desired source  
and the playback starts.  
information  
C: Display onscreen control menu  
D: Time display  
DVD movie playback  
The car sound system can play video DVDs and  
VCDs. After inserting the DVD, the playback starts  
automatically. The DVD menu is displayed.  
Touch the touchscreen once to display the  
playback menu again.  
If the playback does not start with the audio  
playback,  
Press the [ ] button to change to the folder/  
file list.  
The playback menu is shown.  
Press the [  
] button to display all the  
1
folders and files of the data carrier.  
- Or -  
Press the [  
] button to display all the  
audio files of the data carrier.  
2
3
4
5
6
7
1. Return to home menu  
2. Pause playback, call up DVD menu.  
3. Select previous chapter.  
4. Interrupt playback and continue playback.  
5. Select next chapter.  
6. Call up keypad for direct selection of titles,  
chapters.  
[
]
S c r o l l t h r o u g h t h e l i s t p a g e b y  
page.  
Scroll through the list page by page.  
Open selected folder or start titles.  
- Or -  
[
[
]
]
Briefly tap twice (double-click) on the name of  
the folder/track. The folder is opened/the track is  
started.  
7. Show additional operating options.  
Tap on [  
] to display additional operating  
[
]
Exit the folder/file list.  
options of the playback menu.  
After starting a title, the playback menu is  
displayed.  
1
1
8
9
10  
11  
12  
13  
8. Display equalizer.  
9. Define range for repeat function.  
10. Select playback language  
11. Show subtitles  
12. Repeat play  
13. Adjust image.  
2
3
4
5
6
1. Return to home menu  
2. Display the folder/file list.  
3. Short press: Title selection.  
Long press: Fast searching.  
4. Interrupt playback and continue playback.  
5. Short press: Title selection.  
8
DVD/CD/USB media playback  
video files of the data carrier.  
Long press: Fast searching.  
6. Show additional operating options.  
1
If you selected a movie, the playback is started.  
During the movie playback, the playback menu is  
hidden.  
7
8
9
10  
Briefly touch the touchscreen once to display  
the playback menu again.  
The playback menu is shown.  
1
7. Display keypad to directly enter the number of  
the desired title.  
8. Start and end REPEAT function.  
The REPEAT mode changes each time the  
[
] button is pressed.  
Display REPEAT mode  
Repeat current track  
Repeat current folder  
Repeat all tracks of data carrier  
9. Start MIX random track play and end it again.  
If the MIX function is switched on, the  
symbol is displayed in white.  
The MIX mode depends on the selected  
REPEAT function.  
2
3
4
5
6
7
1. Return to home menu.  
2. Display the folder/file list.  
3. Select previous movie.  
REPEAT MIX mode  
mode  
display  
4. Interrupt playback and continue playback.  
5. Select next movie.  
6. Call up keypad for direct selection of movie.  
7. Show additional operating options.  
No random track play  
Mixing tracks of the current  
folder  
Tap on [  
] to display additional operating  
options of the playback menu.  
1
Mixing tracks of the data  
carrier  
10. Display equalizer.  
V i d e o p l a y b a c k f r o m U S B o r  
microSDHC  
Select the desired source via the main menu.  
The device changes to the desired source  
and the playback starts.  
If the playback does not start with the video  
playback,  
8
9
10  
11  
12  
Press the [ ] button to change to the folder/  
file list.  
8. Display equalizer.  
9. Repeat play  
10. Adjust image.  
11. Select audio mode.  
Press the [  
] button to display all the  
folders and files of the data carrier.  
- Or -  
12. Select subtitles language.  
Press the [  
] button to display all the  
9
DVD/CD/USB media playback Bluetooth mode  
Image playback  
Bluetooth mode  
You can make or receive phone calls with  
Bluetooth-enabled phones through the unit. You  
can also listen to music from a Bluetooth-enabled  
device.  
Select the desired source via the main menu.  
The device changes to the desired source  
and the playback starts.  
If the playback does not start with the image  
playback,  
Press the [  
folder/file list.  
Press the [  
folders and files of the data carrier.  
- Or -  
] button to change to the  
Pair the Bluetooth-enabled Devices  
To connect your Bluetooth device to the unit, you  
need to pair the device to the unit. Pairing needs  
only to be done once. You can pair up to five  
devices. You also can search for Bluetooth devices  
by mobile phone.  
] button to display all the  
Press the [  
images of the data carrier.  
] button to display all the  
Turn on the Bluetooth function on the  
device.  
Touch [  
] to search for Bluetooth device  
with the device.  
Select the Bluetooth device ID in the pairing  
list.  
Touch [ Connect ].  
Enter default password “1234.  
Notes:  
The operational range between this unit and a  
Bluetooth device is approximately 5 meters .  
Before you connect a Bluetooth device to this  
unit, familiarize yourself with the Bluetooth  
capabilities of the device.  
Compatibility with all Bluetooth devices is not  
guaranteed.  
Any obstacle between this unit and a  
Bluetooth device can reduce the operational  
range.  
Keep this unit away from any other electronic  
device that may cause interference.  
10  
Bluetooth mode  
Disconnect Bluetooth Device  
To disconnect one device, touch [  
].  
2. You may touch the screen to select  
[ Hang up ] or [ Answer ].  
Speak into the Bluetooth microphone.  
Notes:  
The device will also be disconnected when  
the device is moved beyond the operational  
range.  
If you want to reconnect the device to the  
unit, place it within the operational range.  
If you do not want to reconnect the device to  
the unit automatically, touch [  
Auto Connect ] to [ Off ].  
For details, see the “Adjust Bluetooth  
Settingssection.  
], then set [  
[
]: Touch to mute the microphone audio  
from the unit.  
Touch the icon again to restore the  
microphone audio from the unit.  
Make a Call  
[
]: Touch to transfer a call back to the  
mobile phone.  
]: Touch to access the direct dial screen.  
Select Bluetooth function in the home  
menu.  
[
Pair the phone with the unit.  
Search for phone number from the  
following list:  
]: Phone Book  
]: Call Log  
]: [Missed calls]  
]: [Received calls]  
]: [Dialed calls]  
Adjust Bluetooth Settings  
In Bluetooth menu,touch [  
The option menu is displayed.  
].  
[
[
[
[
[
Touch on the selected option to change the  
setting.  
[Bluetooth]: To turn on or off “Bluetooth”  
function.  
[Auto Connect]: If “Auto Connect” is activated,  
the device automatically connects with  
known Bluetooth devices as soon as they are  
in range.  
[Auto Answer]: If “Auto Answer” is activated,  
incom-ing phone calls are automatically  
answered.  
[Microphone]: Select the microphone  
to be used for the hands-free system via  
Bluetooth®.  
Or touch the number pad directly.  
Answer an Incoming Call  
By default, all incoming calls are received  
automaticaly.  
1. If there is an incoming call, “Incoming” will  
appear on the screen.  
11  
Bluetooth mode PhoneLink  
[Pair Password]: Many Bluetooth® devices  
request the pairing code before establishing  
the connection. You can define it here.  
[Phone Book sync]: To be able to access the  
phone book of a connected telephone, you  
must first synchronise it via this menu entry.  
Phonebook sync may take several minutes to  
load on initial setup.  
Overview of PhoneLink  
The system of the car device is WinCE version,  
which supports the connection between the car  
device and Smart phone.  
And you can also control your phone by the  
car device, such as receiving calls, dialing calls,  
listening to the music and watching movies or  
pictures from your phone.  
Note:  
You can't control your iPhone by the unit.  
(iPhone mirrors display on screen)  
Music Mode  
A2DP  
A2DP is short for Advanced Audio Distribution  
Profile. The mobile phones supporting this  
function can transmit stereo audio, whereas the  
ones not supporting this function can transmit  
mono audio only.  
Connect with Android phone  
Select “PhoneLink” in the main menu and  
select “Androidon the screen.  
Start Android phone [USB debugging].  
The operations of Android phone’s entering  
[Setting] are as follows (since the Android  
phone versions are not the same, it roughly  
has two conditions):  
1) Existence of [Developer options]: Click  
[Additional settings]-Click [Developer  
options]-click to open [Start developer  
options]-click to open [USB debugging]-  
determine to allow.  
2) Inexistence of [Developer options]: Click  
system version number (interior version  
number) for 8 times, then back to setting  
and click [Developer options]-click to open  
“Start developer options”-click to open [USB  
debugging]-determine to allow.  
AVRCP  
AVRCP is short for Audio/Video Remote Control  
Profile. The mobile phones supporting this  
function can control the playback of a Bluetooth  
audio player.  
To make a call in music playing mode, press  
the number keys on the mobile phone and the  
music player will stop. “Calling” will be displayed  
on the TFT and once the call is received the  
caller audio will be transferred to the unit. When  
the call ends, the screen will display the music  
playing menu.  
If there is an incoming phone call, the music  
player will stop and the screen will display  
“Incoming Call. When the call ends, the screen  
display the music playing menu.  
Bluetooth connection.  
Scan for Bluetooth devices and select this  
system for connection.  
Correctly connect USB wire.  
Finish connection.  
(If it is not connected successfully, please replace  
USB cable or vehicle USB interface, or re-insert  
USB wire or restart Android phone and re-try).  
After connection, operate according to the  
screen software.  
12  
PhoneLink Sound settings AUX  
Tip:  
Sound settings  
For your driving safety, please do not use the  
function during driving.  
Equalizer  
For normal use, Android 4.0 to Android  
6.0 version is recommended. Since Android  
2.3X and below version system lacks relevant  
support, when using the version system to  
connect the product, some functions (such  
as: mobile video play, etc.) may not display  
normally.  
You can adjust the equalizer for all sources.  
In the main menu, press the [  
Select EQ mode  
Touch the desired EQ selection: [ Optimal ] / [  
Classic ] / [ Rock ] / [ Jazz ] / [ Techno ] / [ Pop ],  
and the EQ mode will change.  
] button.  
According to the different mobile phone”  
Media library” and “Video” program support  
formats, it is not all the video files copied to  
mobile phone can be identified and played.  
According to the different equipment  
function, not all video files of all formats can  
be played in vehicle terminal smoothly.  
Since the mobile phone data cable  
performance difference in the market, it is  
strongly recommended using the original  
USB data line to connect so as to guarantee  
the connection stability.  
Adjust FAD BAL  
You can adjust the volume distribution in the  
vehicle for all sources.  
In the main menu, press the [  
- Or -  
] button.  
Due to the difference of mobile phone  
performance, when using different mobile  
phones to connect, the performance may be  
different.  
On the control bar of the current audio  
source, press the [ ] button.  
The equalizer menu is displayed.  
Press the [ ] button.  
The menu for fader and balance is displayed.  
Connect with iPhone  
Select “PhoneLink” in the main menu and  
select “iPhone on the screen.  
Open the Personal Hotspot on the settings  
menu of your iPhone.  
Connect your iPhone to the USB port of the  
unit.  
Open the control center of your iPhone and  
touch [AirPlay].  
Select [EC-Mirror], and turn on the  
“Mirroring” function.  
After connecting successfully, the desktop  
of you iPhone will display on the screen of  
the unit.  
Adjust fader and balance with [ ] / [ ] or  
] / [ ].  
Next, press [  
The setting is stored, the current source is  
displayed again.  
[
].  
(If it is not connected successfully, please restart  
the WiFi of your iPhone, and refresh the hotspot  
list on the unit.  
AUX Operations  
Select [ [AV-IN1]/[AV-IN2] on the main menu to  
visit auxiliary device.  
13  
Basic settings  
Sound  
Basic Settings  
In the settings menu, you can adjust the basic  
settings for the different functions of the device to  
your requirements.  
The following settings are possible:  
Subwoofer - Switch subwoofer on/off  
Subwoofer filter - Make the setting according to  
the subwoofer used (settings: 80/120/160 Hz).  
In the main menu, press the [ Settings ]  
button.  
dynamic bass  
Dynamic sound - Switch  
on/off.  
The settings menu is displayed, the General  
submenu is activated.  
Time  
The following settings are possible:  
Date - Set the date.  
Clock mode - Selection between 12 and 24-h  
mode.  
Time - Set the time.  
Auto clock - Switch automatic clock setting on or  
off with the time data transmitted via RDS.  
Call up the submenus with the buttons in the  
lower area of the settings menu.  
Language  
The following settings are possible:  
OSD - Language for the user interface of the  
device.  
General  
The following setting are possible:  
Radio region - Select the reception region for the  
radio reception.  
DVD audio - The audio playback of DVDs is  
started in the language defi ned here.  
DVD subtitle - The subtitles of DVDs are shown in  
the language defi ned here.  
DVD menu - The DVD menu is displayed in the  
language defi ned here.  
Blackout - Choose screen blackout off, 10s or 20s.  
Dimmer mode - Touch the [Dimmer mode], there  
4 mode to select: Night/Dark/Normal/Bright.  
OFF timer - Setting the switch-off time. To protect  
the vehicle battery, the device is automatically  
switched off after the set time period if the  
vehicle ignition is switched off.  
Beep - Switch confirmation beep on/off.  
Key color - select the backlight color of the keys.  
SWC - The buttons of a connected steering wheel  
control can be configured here.  
Bluetooth  
The following settings are possible:  
Bluetooth - Bluetooth® can be switched on or off .  
Auto connect - If “Auto Connect” is activated,  
the device automatically connects with known  
Bluetooth® devices as soon as they are in range.  
Auto answer - Phone calls from connected  
telephones are automatically answered if this  
option is enabled.  
Pairing code - Many Bluetooth® devices request  
the pairing code before establishing the  
connection. You can define it here.  
Software version - Display of the current software  
version.  
Load factory settings - Resets all personalised  
settings.  
Video  
Microphone - Select the microphone to be used  
for the hands-free system via Bluetooth®.  
The following settings are possible:  
Set password - Define a password if you want to  
use the parental controls.  
Volume  
Rating level - The rating of DVDs can be defi ned  
here. If set to “Adult, all movies can be played  
back. If a password was configured, the rating  
level can be changed only with the password.  
Video out - Switch video out on/off  
You can adjust the volume ratio for all audio  
sources in the volume menu.  
Aspect ratio - Full/Normal mode  
Parking - If “Parking” is activated, video/pictures  
will notbe displayed during driving. Please set  
according to local laws.  
14  
Notes of connection Scope of delivery  
Sound setting  
Notes of connection  
This unit is designed to be used in a vehicle with a 12-volt battery and negative grounding. Before  
installing this unit to a recreational vehicle, a bus, or a truck, make sure the battery voltage is  
appropriate for this unit to be used, otherwise, install a transformer by professional to convert the  
output voltage to 12V.  
To avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected  
before installation.  
To prevent short circuit in the wiring and damaging to this unit, secure all wirings with cable clamp  
or adhesive tape. Route the wirings in a secured, out of heating place without touching any moving  
parts such as gear shift, handbrake, and seat rails to prevent the wiring insulation being melted / wore  
off.  
Never pass the yellow power cord through the installation hole into the engine compartment and  
connect to the car battery. Otherwise, a high possibility of serious short circuit to the electrical system  
may be occurred.  
Replacing a new fuse with 15A rating when the old one is broken, using no fuse or fuse with improper  
rating may cause damage to this unit or even fires. If a proper fuse is installed and electrical problems  
still occur, please contact with any professional car shops for inquiry.  
Do not connect other equipments with the car battery to avoid battery overheating.  
Please make sure all the wiring connections & the cables of the speakers are well-insulated. Otherwise,  
this unit may be damaged by short circuit.  
If there is no ACC available, Please connect ACC lead to the power supply with a switch.  
If an external power amplifier is connected, please don’t connect P.CONT lead to the power lead of the  
external power amplifier, otherwise, electric spark or other damage may be resulted.  
Never ground the speaker output to prevent the damage to the built-in power amplifier.  
The minimum rating of the speakers connected to this unit is 35W with 4 to 8Ω impedance.  
Scope of delivery  
The scope of delivery includes:  
1 car sound system  
1 operating / installation instructions  
1 external Bluetooth microphone  
1 remote control (incl. battery)  
6 connecting cable  
1 EVA MAT  
15  
Connection diagram  
Device Connections  
M I C  
U S B  
S T E M V A S Y  
16  
Troubleshooting  
What appears to be a problem is not always serious. Please check the following points before calling a  
service center.  
Problem  
Cause  
General  
Corrective action  
Unit fuse blown.  
Install new fuse with correct rating.  
Install new fuse with correct rating.  
Reset the unit.  
Car battery fuse blown.  
Illegal operation  
Unit can not power on  
Improper audio output connection.  
Volume set too low.  
Check wiring and correct.  
Increase volume level.  
Speakers damaged.  
Replace speakers.  
No/low audio output  
Adjust the channel balance to center  
position.  
Heavily biased volume balance.  
Speaker wiring is in contact with metal part  
of car.  
Insulate all speaker wiring connections.  
Pirated disc is in use.  
Use original disc.  
Speaker power rating does not match unit.  
Wrong connections.  
Replace speakers.  
Poor sound quality or  
distortion  
Check wiring and correct.  
Check wiring and correct.  
Check the ‘MUTEwiring and correct.  
Speaker is shorted.  
Tel-Mute malfunction  
MUTE wire is grounded.  
Unit resets itself when  
engine is off  
Incorrect connection between ACC and BATT. Check wiring and correct.  
TFT monitor  
Warning information is  
Parking break wiring is not correct.  
Check wiring and correct.  
shown at all times  
The color system of DVD disc does not match Adjust the color system of the DVD disc  
the monitor.  
playing back or the monitor in use.  
Use original disc.  
Flashing image or  
interference appears on  
screen  
Pirated disc is in use.  
Video cable damaged.  
Improper video signal connections.  
Disc playback  
Replace cables.  
Check wiring and correct.  
Cannot insert disc  
A disc is already inside the unit.  
Disc is warped or scratched.  
Disc is dirty or wet.  
Eject current disc and insert new one.  
Use disc in good condition.  
Clean disc with soft cloth.  
Use compatible disc.  
Disc does not play back  
Incompatible disc is used.  
Disc is inserted upside down.  
Insert disc with label side up.  
Disc region code is not compatible with unit. Use disc with proper region code.  
PBC cannot be used during  
VCD playback  
PBC is not available on the disc.  
Use disc with PBC available.  
Repeat or search function  
is invalid during VCD  
playback  
PBC is on.  
Turn PBC off.  
Error messages  
Disc is dirty.  
Clean disc with soft cloth.  
Insert disc with label side up.  
Insert disc.  
No disc  
Disc is upside down.  
No disc inside.  
Disc is dirty.  
Clean disc with soft cloth.  
Insert disc with label side up.  
Use disc with compatible format.  
Bad disc  
Disc is upside down.  
Disc format is not compatible with this unit.  
Unknown disc  
Region Error  
DVD region code is not compatible with this  
unit.  
Use disc with compatible region code.  
17  
Supported formats  
Video  
File  
Format  
Supported  
Profile  
Supported  
file extension  
Video  
bitrate  
Video Codec  
Audio Codec  
Audio SampleRate  
MPEG-2:  
Simle,  
Main,  
*.mpg  
*.mpeg  
*.dat  
MPEG  
AC3  
PCM  
MP3  
MPEG-1  
MPEG-2  
MPEG  
High  
*.vob  
MPEG2:  
Simple,  
Main,  
MPEG  
MP3  
AC3  
Avi  
AVI  
*.avi, *.xvid  
PCM  
AAC  
(MPEG2,MPEG4)  
High  
FLAC  
MPEG4:  
COOK  
AAC  
MP3  
RM  
FLV  
RV8/9/10  
N/A  
".rm", ".rmvb"  
*.flv  
8KHz/16KHz/1/32KHz  
11KHz/22K/44KHz  
12KHz/24K/48KHz  
H.264:  
Baseline,  
Main,  
PCM  
MP3  
AAC  
H264, SH.263  
Dolby AC3  
EAC3  
High  
MP3,  
PCM,  
32KHz/44.1KHz/48KHz  
MPEG4:  
MPEG4,  
MPEG-1/2,  
H264,  
Advanced Simple,  
Simple MPEG2:  
AC3,  
ASF/  
WMV  
Cook  
*.asf  
AAC,  
Bitrate:  
40Mbps  
Resolution:  
1080p  
44.1KHz  
Simple, Main,  
High  
H263  
mpeg,  
aac_pure  
APE  
8 ~ 96KHz  
AAC,  
MP2,  
FrameRate:  
30fps  
MPEG4,  
H.264,  
MPEG4:  
Advanced Simple,  
Simple H.264:  
Main,  
FLA  
MP3,  
C8~192KHz  
MP4  
MKV  
OGM  
*.mp4, *.mov  
AC3,  
SH. 263,  
MPEG1/2  
PCM,  
AAC(HE-AAC)  
8 ~ 96KHz  
AAC_PURE,  
MPEG  
MP2,  
MP3,  
MPEG-1 layer1/2  
MPEG1/2,  
MPEG4,  
H264,  
32KHz/44.1KHz/48KHz  
MPEG2:  
Simpe,  
AC3,  
AAC,  
MPEG-2 layer1/2  
Main,  
*.mkv  
RV8/9/10,  
SH.263,  
H.263  
PCM,  
32KHz/44.1KHz/48KHz  
High MPEG4:  
Advanced  
mpeg,  
aac_pure,  
flac  
mp3  
AC3  
MPEG2:  
Main,High  
MPEG-2;  
MPEG-4;  
H.264;  
RV8/9/10;  
H.263  
PCM  
MPEG4:  
*.ogm  
MPEG  
AAC,  
Advanced Simple,  
Simple H.263:  
Baseline  
RA_COOK,  
VOBIS  
18  
Supported formats  
Audio  
Supported file Supported  
File Format  
Sample rate  
extension  
audio  
supported  
*.mp1  
*.mp2  
*.mp3  
MP3  
MP1/MP2/MP3  
8KHz/16KHz/1/32KHz  
11KHz/22KHz/44KHz  
supported  
8 ~ 96KHz  
AAC  
*.aac  
*.flac  
AAC  
supported  
8~192KHz  
FLAC  
FLAC  
supported  
8 ~ 96KHz  
APE  
*.ape  
APE  
Picture  
Supported file  
extension  
File Format  
Limitation  
baseline:  
width* height <4096*4096  
*.jpg  
JPEG  
*.jpeg  
PNG  
GIF  
*.png  
*.gif  
width * height <4096*4096  
width * height <4096*4096  
19  
Supported formats  
DVD file  
Video  
File  
Supported  
Supported  
Profile  
Supported Supported  
extension audio codec  
Video  
bitrate limit  
Audio bitrate  
limit  
Format video codec  
.mpg  
mpeg,  
.mpeg  
AC3,  
MPEG-1 Video  
MPEG  
main  
high  
MPEG2 Video: 10Mbps  
MPEG4 Video: 10Mbps  
MPEG-2 Video  
.dat  
PCM  
.vob  
MPEG2: Main, High  
upto 720*576  
MP2,MP3,  
MPEG2 Video: 10Mbps  
MPEG4 Video: 10Mbps  
AVI  
Avi(MPEG2,MPEG4,)  
*.avi, *.xvid  
AC3,PCM  
MPEG4: Advanced  
Simple, Simple  
800*600  
WMA  
MPEG4: Advanced  
Simple, Simple  
800*600  
MP3, PCM,  
AC3  
audio (wma)  
bitrate(32k~192k)  
ASF  
MPEG-4 video  
MPEG 4 Video  
*.asf,  
MPEG4:  
Advanced Simple,  
Simple800*600.  
AAC,MP2,  
MP3,AC3  
MP4  
.mp4, .mov  
MPEG4 Video: 10Mbps  
FLV  
H.263  
H.263 main  
.flv,.f4v  
.dat  
mpeg  
3Mbps  
3Mbps  
DAT  
MPEG1  
MPEG1 main  
mpeg,pcm,ac3  
MPEG2: Main, High  
upto 720*576  
VOB  
MPEG2  
.vob  
mpeg,pcm,ac3  
10Mbps  
mp3  
AC3  
MPEG2: Main, High  
MPEG2,  
MPEG4  
MPEG2 Video: 10Mbps  
MPEG4 Video: 10Mbps  
OGM  
*.ogm  
MPEG4: Advanced  
Simple, Simple  
LPCM  
MPEG  
Audio  
Supported  
audio codec  
File Format Supported file  
Audio bitrate limit  
MP3  
.mp3 .mp2  
MP1/MP2/MP3/pcm  
8kbps~320kbps  
M4A  
AAC  
.m4a  
.aac  
aac  
aac  
32Kbps~320Kbps  
32Kbps~320Kbps  
Picture  
Supported  
file  
File Format  
Limitation  
baseline jpeg, Decoding source picture size up to 8784x5856  
progressive jpeg Re-sample to 720x480 and 720x576  
JPEG  
20  
面板操作  
电源开关:按面板上 [  
] 电源键开机。  
5
7
6
1
2
3
4
AV  
8
9
10  
1.  
2.  
退出键  
6. 碟槽  
将光碟有标识的一面向上插入碟槽。  
按此键退出光碟 ( 当有碟片插入时 )  
7.  
8.  
卡插槽  
microSD  
此插槽支持  
电源键  
短按:开机  
在操作时短按:进入静音状态  
长按:关机  
.  
SD  
插槽  
插槽,只播放多媒体文件。插入一个  
,主机将会自动开始阅读和回放  
USB  
USB  
USB  
USB  
3.  
按键  
短按:切换当前播放源与主桌面  
长按:直接进入蓝牙模式  
内文件 .  
9. 复位孔  
恢复出厂设置  
4. 音量键  
/
按此键增加/减少音量。  
10.  
输入  
AV  
5. 麦克风  
21  
遥控器操作  
ConRtreoml oPtaenCelontrol  
11. 转到主菜单  
12. 出碟  
11  
12  
13  
14  
15  
16  
17  
18  
25  
26  
27  
28  
29  
30  
31  
32  
13. 转到收音  
14. 转到碟片  
15. 向上搜台  
回到上一章节  
16. 选择收音波段  
17. 放大 (  
DVD/VCD  
视频菜单 )  
音乐菜单 ( 音频菜单 )  
18. 调整屏幕设置  
19. 打开音效菜单  
20. 菜单搜索  
33  
19  
34  
20  
21  
22  
21. 确认  
22. 打开路径菜单  
35  
36  
(DVD)  
PBC (VCD)  
/ 关  
23. 数字键  
37  
38  
24. 重复播放  
25. 转到下一个播放源  
26. 开关键  
23  
24  
27. 转到蓝牙功能键  
28. 转到 USB 功能键  
29. 暂停 / 开始  
39  
40  
41  
30. 向下搜台  
回到下一章节  
角度选择  
31.  
32.  
DVD  
图片旋转  
转到视频清单  
字幕语言选择  
DVD  
图片清单  
33. 改变音频语言  
34. 音量调节  
(DVD)  
35. 进入设置菜单  
36. 音频输出静音开关  
37. 直接跳转曲目模式  
38. 拨号 / 接听电话  
39. 挂机  
40. 随机播放  
41. 短按逐个清除数字  
长按清除所有数字  
22  
目录  
基本操作 ...................................................24  
开机和关机............................................24  
静音.......................................................24  
调节音量 ...............................................24  
模式选择 ...............................................24  
主界...................................................24  
设置收音区域 ........................................24  
通用设置 ...............................................33  
视频设定 ...............................................33  
声音设定 ...............................................33  
时间设定 ...............................................33  
语言设定 ...............................................33  
蓝牙设定 ...............................................33  
音量设定 ...............................................33  
收音 ..........................................................25  
进入收音机播放.....................................25  
选择波段 ...............................................25  
手动调台 ...............................................25  
自动搜台 ...............................................25  
手动输入电台频.................................25  
手动存储电台 ........................................26  
自动搜存电台 ........................................26  
扫瞄预设电台 ........................................26  
远程/本地选择 .......................................26  
附件清单 ...................................................33  
电气连接 ...................................................34  
故障排除 ...................................................36  
支持格式 ...................................................37  
媒体播放 ...................................................26  
插入碟片 ...............................................26  
弹出碟片 ...............................................26  
视屏播放触摸按键分布..........................26  
SD/前置USB..................................26  
DVD电影播放........................................27  
DVD/CDUSBmicroSDHC音频播放27  
USBmicroSDHC视频播放 .................28  
USB SDHC图片播放 .........................28  
蓝牙 ..........................................................29  
蓝牙配对 ...............................................29  
断开蓝牙连接 ........................................29  
拨打电话 ...............................................29  
接听电话 ...............................................30  
调整蓝牙设定 ........................................30  
手机音乐 ...............................................30  
双机互动 ...................................................31  
连接安卓手机步.................................31  
连接iPhone步骤 ....................................31  
音效 ..........................................................32  
调整音效 ...............................................32  
调整扬声器平衡.....................................32  
辅助设备 ...................................................32  
基本设置 ...................................................33  
23  
基本操作  
提示:  
主界面  
在主界面,按屏幕上的按钮,可以进入不同的  
播放源和操作模式。  
在开始装置前,请先移除机器顶部的机芯固定  
镙丝。(此螺丝仅在运输途中起固定机芯的作  
用)  
[  
] 按钮进入主界面,如下显示:  
开机和关机  
开机:按[  
]按键启动主机。  
关机:在工作模式下,长按[  
机。  
]按键即可关  
静音  
播放时,短按 [  
] 按键进入静音模式。  
注意:  
1
3
4
2
再次短按 [  
态。  
] 键或者调节音量将退出静音状  
1 进入设置菜单功能  
2. 功能图标  
3. 日期时间显示  
调节音量  
[  
4. 快速进入 设定  
EQ  
] [  
] 键增加或减小音量。  
音量调节的范围从050。  
设置收音区域  
本机因收音区域不同而对应不同的收音频率范  
模式选择  
围。工厂出厂收音区域为“亚洲( )”,  
FM/AM  
如果你在亚洲范围之外,需去设置相应的收音  
区域:  
开机状态下,按 [  
] 键显示主菜单。  
在屏幕的工具栏里点击相应的功能图标,  
进入选择的模式,如碟片、收音等。  
在程序栏内按住屏幕并左右拖动以显示更  
多内容。  
在主界面,按[  
单。  
] 按钮 ,进入到设置菜  
在设置菜单底部,按[通用]按钮,就会显示  
收音区域的选项。  
点击二次[收音区域]即可显示有效的收音区  
域。  
在收音区域清单中,双击你所需的区域。  
[  
] 按钮,主界面再次显示。  
24  
收音  
收音模式  
选择波段  
轻触 [ ] ,在FMAM中切换选择波段:  
·FM波段选项: FM1FM2FM3  
·AM波段选项: AM1AM2  
进入收音机播放  
进入主桌面,轻触的 [ 收音机 ] 图标,进  
入收音机模式。  
手动调台  
手动调台时,频率一步步变化。  
点击 [  
] [  
] 选择上一/下一频率。  
自动搜台  
长按 [  
台。  
] [  
] 自动搜索上一/下一有效电  
如果要停止搜索,重复以上操作或进行其它收  
音操作。  
手动输入电台频率  
1. 返回主菜单  
2. 当前收音波段  
3. 当前预置电台  
4. 当前频率  
轻触[  
] , 进入数字键盘输入界面。  
轻触数字以输入有效频率。  
轻触 [ OK ] 确认。  
5. 时间  
轻触 [  
] 清除输入的数字。  
6. 预置电台储存  
7. 波段转换  
8. 上一频率  
9. 自动搜索  
10. 下一频率  
11. 显示其余控制键  
12. 远程/本地选择  
13  
14  
15  
13. 进入 设定界面  
EQ  
14. 直接输入频率点  
15. 自动搜存电台  
25  
收音 媒体播放  
手动存储电台  
插入碟片  
将碟片有标识的一面朝上插入碟槽,本机会自  
动吸入光碟开始读取。  
[ ]调到所需的波段。  
选择所需的频率。  
长按预设电台列表  
储存。  
P1 P6  
,将当前电台  
注意:  
1. 入碟前请确认碟槽内是否已经有碟。  
2. 入碟後,将退出当前模式,自动进入光碟播  
放模式。  
自动搜存电台  
在当前波段,你能自动搜索存储6个超强信号的  
电台,进行此操作将覆盖之前存储的电台。  
选择一个波段。  
3. 刻录方式不同,部分  
可能无  
C D - R C D - R W  
DVD-R DVD+R DVD-RW DVD+RW  
法播放。  
[  
] 显示其它控制键。  
[ TS ],系统将自动搜索到有效电台并自  
动保存。  
弹出碟片  
按面板 [  
] 键弹出光碟。  
扫瞄预设电台  
点击屏幕下方 [  
注意:  
] 键,自动扫瞄当前波段  
1. 出碟後,自动转换到其他可播放模式。  
2. 请在出碟後10秒内取走光碟,否则光碟会再  
次吸入以免意外损坏。  
的预设电台, 每个电台浏览播放 5 秒,自  
动扫瞄完毕后系统自动退出扫瞄界面。  
远程/本地选择  
视屏播放触摸按键分布  
当播放图片或视屏时,在屏幕上的功能区域分  
布如下图所示:  
轻触 [ 远程 / 本地 ] 图标, 远程 / 本地切换功能。  
[ 远程 ] : 可以接收较弱信号电台 ;  
[ 本地 ] : 只接收信号较强电台。  
A
B
C
区 : 返回主桌面  
区 : 显示播放资讯  
区 : 屏幕控制按键  
区 : 时间显示  
A
B
C
D
/前置  
SD  
连接  
装置  
USB  
装置插入  
前置  
接口,将自  
USB  
SD/USB  
动开始播放。  
SD/  
移除  
切换至另一个音源。  
移除外部 装置。  
USB/SD  
26  
媒体播放  
[  
件。  
],显示存储设备中所有的音频文  
电影播放  
DVD  
本机支持  
视频,插入碟片后,自动  
DVD VCD  
进入光碟播放。  
再按屏幕,播放界面如下图所示:  
1
[
[
[
]
]
向上翻页  
向下翻页  
] 打开所选择的文件 / 曲目  
- 或者 -  
双击文件名称,相应的文件被打开  
2
3
4
5
6
7
[
]
退出文件夹 / 文件列表  
1. 返回主菜单  
2. 显示 目录  
3. 上一章节  
DVD  
打开曲目后,显示如下播放界面:  
1
4. 暂停 / 播放  
5. 下一章节  
6. 进入搜索界面  
7. 显示更多控制按键  
点击 [  
] 显示更多控制按键。  
1
2
3
4
5
6
1. 返回主菜单  
2. 显示文件列表  
3. 上一曲  
快退 (长按)  
4. 暂停/播放  
5. 下一曲  
8
9
10  
11  
12  
13  
快进 (长按)  
6. 显示其余控制键  
8. 进入 界面  
EQ  
9. 重复 片段  
A-B  
10.  
音频语言选择  
DVD  
1
11. 选择字幕语言  
12. 重复播放  
13. 画质调整  
音频播  
DVD/CD USB microSDHC  
在主界面,选择一个所需的播放源,播放  
开始。  
如果音频没有开始播放,  
[ ],进入到文件列表。  
7
8
9
10  
[  
],显示存储设备中所有的文件夹和  
7. 进入曲目搜索界面  
文件  
- 或者-  
8. 重复播放  
播放时,您可以选择不同的循环播放模式,  
反复轻触 [ ]图标,根据播放文件格式不同,  
27  
媒体播放  
重复功能的选择也不同,执行重复时所呈现的  
文字解释如下:  
1. 返回主菜单  
2. 显示文件列表  
3. 上一曲目  
快退 (长按)  
4. 暂停/播放  
5. 下一曲目  
快进 (长按)  
6. 进入曲目搜索界面  
7. 显示其余控制键  
9. 播放音频时,可以随机顺序播放所有曲目,  
如果随机打开, 显示为白色。  
随机功能模式是依赖重复播放功能而进行。  
点击 [  
] 显示更多控制按键。  
1
10. 进入  
界面  
EQ  
视频播放  
USB microSDHC  
8
9
10  
11  
12  
从主界面选择所需的播放源。  
如果视频播放没有开始,  
[ ],进入到文件列表。  
进入  
界面  
EQ  
8.  
9. 重复播放  
10. 画质调整  
[  
文件  
- 或者-  
],显示存储设备中所有的文件夹和  
11. 音频语言选择  
12. 选择字幕语言  
[  
件。  
],显示存储设备中所有的视频文  
USB SDHC 图片播放  
从主界面选择所需的播放源。  
如果图片播放没有开始,  
[ ],进入到文件列表。  
[  
],显示存储设备中所有的文件夹和  
文件  
- 或者-  
[  
],显示存储设备中所有的图片文  
件。  
在播放视频文件时,播放控制按钮是隐藏的。  
轻触屏幕,可以显示出播放控制按钮,显  
示如下播放界面:  
1
2
3
4
5
6
7
28  
蓝牙  
提示  
断开蓝牙连接  
要断开手机蓝牙连接, 请轻触 [  
关闭手机的蓝牙功能。  
] 图标或  
为了您的安全,避免在开车时通电话。  
本机具备蓝牙无线传输功能,可连接市场上主  
流的、具有蓝牙功能的手机等设备。蓝牙配对  
成功后,可通过本机拨号/接听等功能,还可  
以播放手机中的音乐。  
蓝牙配对  
要将手机连接至本机,您需要将该手机与本机  
配对。  
打开手机的蓝牙功能(本机蓝牙功能默认  
是开启)。  
提示 :  
当装置移至操作范围之外时, 蓝牙连接也  
会断开。  
用手机搜索到本机蓝牙,本机蓝牙装置名  
会显示在您的手机蓝牙配对列表上;  
也可用本机蓝牙搜索手机,搜索到的手机  
名会显示到本机蓝牙配对列表上。  
搜索成功后,轻触本机蓝牙名,按手机的  
提示输入蓝牙配对密码“1234”,即可  
与本机蓝牙配对。  
如果您想将手机重新连接至本装置, 将其  
置於操作范围之内即可。  
如果您不想让手机自动重新连接至本装置 ,  
请轻触蓝牙设定 [  
然后选择 [ 。 有关详细信息, 请参阅  
Off]  
“调整蓝牙设定” 部分。  
] 图标 >[ 自动连接 ],  
配对成功后,本机屏幕上即显示被配对的  
蓝牙型号名,操作显示界面如下。  
拨打电话  
在拨打电话的界面,轻触[ ],进入蓝牙  
电话本,根据您的所需,查找联系人的  
电话号码,然后轻触[拨号],进入通话界  
面。  
[
[
[
[
[
]: 电话本  
]: 通话记录  
]: 未接电话  
]: 已接电话  
]: 已拨电话  
提示  
本机与手机之间的操作范围 : 小於 5 米。  
在将手机连接至本机之前, 您需要熟悉设  
备的蓝牙功能, 本机不保证兼容所有的手  
机。  
本机与手机之间的任何障碍物都会使操作  
范围缩小。  
或直接通过数字键区域输入电话号码。  
29  
蓝牙  
选中号码后, 轻触电话号码, 即可进入通话  
界面。  
[ 电话薄同步 ] : 打开 “同步” 功能, 可把  
手机中的 “电话薄” 同步到  
本机。 轻触 “同步” 即可  
同步手机上的电话号码到本机  
( 同步过程大约需几分钟时  
), 同步完毕后, 本机即  
可显示手机电话本上的相关资  
讯。  
手机音乐  
·
如果所连接的手机支持高级音频传送功能  
), 则您可通过本机来播放存储在手  
机中的音乐。  
(
A2DP  
[
[
]: 打开或关闭麦克风。  
]: 通话声音将由本装置的扬声器转换至  
将手机与本装置配对。  
轻触 [ 蓝牙 ],将显示蓝牙菜单。  
手机播放音乐,音乐就从本机喇叭播出。  
手机。  
[
]: 进入数字键盘界面。  
接听电话  
如有来电,屏幕上的 [ 来电 ...], 按 [  
图标即可接听电话。  
·
如果您的设备支持播放控制功能 (  
AVRCP  
)
]
轻触本机蓝牙界面上的 [  
蓝牙音乐操作界面 。  
] 图标,进入  
轻触 [  
] 可终止通话。  
可以通过本机蓝牙界面功能图标控制手机  
的音乐播放。  
[
[
]/[  
]: 上一曲 / 下一曲  
]: 暂停 / 播放  
调整蓝牙设定  
在本机蓝牙菜单中, 轻触蓝牙设定 [  
标, 将显示蓝牙设定的选项菜单。  
] 图  
您可更改以下本机蓝牙设定 :  
[ 蓝牙 ] : 开启或关闭 “蓝牙” 功能。  
[ 自动连接 ] : 开启或关闭 “自动连接” 功  
[ 自动回应 ] : 开启或关闭 “自动应答” 功  
[ 麦克风 ] : 可以选择内置 / 外置蓝牙麦克风  
[ 配对码 ] : 输入初始密码 1234”, 您可  
以进入重新设定配对码。 重新设  
定配对码完毕后, 自动退出设定。  
30  
双机互动  
双机互动  
提示 :  
双机互动功能是车载设备与手机进行信息交互  
的功能应用, 对于手机本身的功能存在一定  
的依赖性。 此功能可使您在汽车行驶过程中,  
不用看着手机屏幕、 触摸手机屏幕或操作手机  
按键, 只需要用车机上的物理按键或车机的触  
摸屏就可以控制和操作手机, 包括接听、 拨  
打电话、 听手机音乐等功能。  
为了您的行车驾驶安全, 在开车时请勿使  
用该功能。  
为了正常使用, 本机推荐安卓系统 4.0 至  
6.0 版本, 由于  
以下版本系  
Android2.3.X  
统缺少相关支持, 因此在使用这部分版本  
系统手机连接本产品时, 部分功能 (如:  
手机视频播放等) 可能无法正常显示。  
根据手机 “媒体库” 及车机 “视频”  
程序支持格式的不同, 不是所有被拷贝到  
手机中的视频文件都能够被识别和播放。  
根据设备的功能不同, 并不是所有格式的  
视频文件都能流畅在车载终端内播放。  
由于市场上的手机数据线性能差异悬殊,  
本机系统为  
Android  
连接方式为标准  
版, 支持车载终端与  
WIN CE  
手机互控、 与  
镜像的功能。  
iPhone  
接口连接。  
USB  
强烈推荐您使用手机自带的原厂  
数据  
USB  
线进行连接, 以保证连接的稳定性。  
由于手机性能的差异, 使用不同的手机连  
接时, 性能可能存在差异。  
连接  
步骤  
iPhone  
USB  
从手机屏幕底部向上轻扫进入控制中心并  
设定界面打开个人热点。  
线
iPhone  
正确连接  
连接安卓手机步骤  
开启手机 [  
手机进入“设置 -- 关于设备”操作如下(由  
于手机版本不尽相同致有两种情况):  
1) 存在 “开发者选项” : 点击 “开发者选  
项” — 点击打开 “开启开发者选项” —  
调试 ]  
USB  
点击  
按钮。  
[Airplay]  
选择  
连接成功后,手机桌面将会显示在车机  
,打开 [ 镜像输出 ] 功能。  
[EC-Mirror]  
上。  
点击打开 “  
调试” —确定允许。  
USB  
2) 不存在 “开发者选项” : 点击系统版本  
号 (内部版本号) 8 次, 再回到设置中,  
点击 “开发者选项” —点击打开 “开启  
开发者选项” —点击打开 “  
确定允许。  
调试” —  
USB  
蓝牙连接  
需要建立手机与车载终端的蓝牙连接, 才  
能将手机音频传输到车载终端, 通过汽车  
扬声器播放手机中的音频内容, 可以使用  
户在使用本软件的同时, 方便的接听和拨  
打手机电话、 听取音乐、 视频等功能。  
正确连接  
线。  
USB  
完成连接。  
若未能连接成功, 请更换  
线缆或车机  
USB  
线或重启手机,  
USB  
接口,或重新拔插  
USB  
再次尝试。)  
完成连接后按屏幕软件进行需求操作。  
注 : 第二次连接只需直接连接 线即可。  
USB  
31  
音效 辅助设备  
调整音效  
辅助设备  
在主菜单选择 [AV- 输入 1] 访问前置辅助设备;  
选择 [AV- 输入 2] 访问後置辅助设备。  
轻触主桌面下方的 [  
音效设置,详见以下操作:  
轻触 [ ], 将显示以下选项:  
] 图标,快捷进入  
1)选择预设音效  
[ 舒适 ]/[ 古典 ]/[ 摇滚 ]/[ 爵士 ]/ [ 轻快 ]/[ 流行 ]  
以上是系统已预设完成的音效,根据您的需  
要进行选择。  
2)手动设置均衡器  
轻触均衡器上下两边可以调节各个频段的参  
数。  
3)轻触 [ 重置 ] 恢复为默认设置。  
调整扬声器平衡  
您可以调整前置和后置扬声器平衡、 左右扬声  
器平衡以及低音扬声器设置。  
轻触主桌面下方的 [  
音效设置。  
] 图标,快捷进入  
- 或者 -  
在任一音频界面的控制按键区,按 [  
图标。  
]
轻触 [  
],将显示以下选项:  
点击汽车模型的 [ ] [  
] 图标调整左  
右平衡,点击汽车模型的 [ ] [ ] 图标  
调整前后衰减。  
然后,按 [  
效设置界面。  
]. 当前设置被保存,退出音  
32  
基本设置 附件清单  
基本设置  
在主菜单选择 [  
(显示如下图):  
时间设定  
日期:设定年月日。  
时钟模进行 12 小时制24 小时制切换。  
时间:设定小时、分钟。  
] 进入系统设置界面。  
:开启 / 关闭 RDS 时间同步。  
Auto clock  
语言设定  
原文:选择操作界面语言。  
声音:选择  
字幕:选择  
音频语言。  
界面语言。  
DVD  
DVD  
DVD  
DVD  
碟片菜单:选择碟片菜单界面语言  
蓝牙设定  
蓝牙:开启或关闭“蓝牙”功能。  
通用设置  
显示如下设置:  
自动连接 : 开启或关闭 “自动连接” 功能。  
自动回应 : 开启或关闭 “自动应答” 功能。  
配对码 : 您可以进入重新设定配对码。 重新  
设定配对码完毕后, 自动退出设定。  
收音区域 : 选择收音区域。  
黑屏模式:选择屏幕保护状态 ( 关闭 /10 /20  
)。  
调光模式:轻触本键,可以选择四种不同光线  
麦克风 : 可以选择内置 / 外置蓝牙麦克风。  
模式:夜晚 / 黄昏 / 正常 / 明亮。  
:设置关机时间。  
OFF timer  
音量设定  
您可针对不同的音源设定不同的音量增益, 以  
蜂鸣器 : 开启 / 关闭按键音效。  
按键背光:可进入按键背光颜色选择。  
: 轻触本键,可进入方向盘控制界面。  
软体版本:显示当前机器的软件版本号。  
使各个音源的音量输出差 符合您的习惯。  
SWC  
恢复出厂设置:复位,选择是否执行。  
附件清单  
本机包含如下附件 :  
视频设定  
显示如下设置:  
设置密码:设定视频密码。  
级别等级 : 设置童锁等级。  
视频输出:视频输出开关  
高宽比:调整视频播放时,屏幕的高宽比例。  
行车时视频:开启 / 关闭行驶时视频。当行车时  
视频开启时,进入视频观看时会出现“警告”  
界面。  
1 主机  
1 说明书  
1 外置蓝牙麦克风  
1 遥控器 (包含电池)  
6 整机配线  
1 回力胶垫  
声音设定  
显示如下设置:  
重低音喇叭输出:开启关闭重低音。  
重低音喇叭过滤:选择重低音扬声器滤波器标  
准。 ( 设置 : 80/120/160  
)
Hz  
动态范围压缩:开启关闭动态音。  
33  
电气连接  
Sound setting  
注意事项  
本机用於  
电池和负极接地的车辆,若将本机安装在  
电池系统的车辆,请安装降压装置。  
24V  
12V  
为了避免电气系统短路, 安装前应断开电池的负极端的连接。  
请将连 安置在可固定的地方, 使其无法接触任何移动部件, 如手刹、 变速捍、 座椅固定导  
轨等 ; 不要将连 安置在热源区, 如暖气排放口附近等, 否则热源会引起接  
缘层熔化或  
磨损, 进而引起连接 与车身短路。  
请勿将电源正极连接 穿过安装孔引入引擎室再接电池, 否则可能损坏电源 , 进而引起电源  
与车身短路。  
更换保险丝时, 请使用指定规格 (  
15A  
正常工作, 甚至损坏本机或引发火�。  
) 的保险丝, 使用规格不匹配的保险丝可能导致无法  
请勿将其他设备与本机共用一个电源, 否则可能因过载导致故障。  
请用绝缘胶布包裹连接 裸露处, 以免发生短路现象。  
捆扎好所有连接 , 避免任何连 端子与机身或车身金属部分接触而导致短路。  
線 線  
当打开本机电源时, 外接功放控制信号通过连接  
不要将  
输出, 若本机连接了外接功放, 请  
P.CONT  
连接至功放的电源端, 否则会引发故障。  
P.CONT  
本机的扬声器输出端子严禁接地,否则将会烧坏功放。 请勿使用共接地 3 型扬声器系统,  
不可将扬声器连接 接在车体上。  
连接本机的扬声器的最大输出功率为  
, 阻抗值为  
35W  
4Ω  
34  
电气连接  
M I C  
U S B  
车 载 功 放  
35  
故障排除  
问题  
原因  
方法  
一般问题  
本机保险丝已烧熔。  
安装合适规格的新保险丝。  
安装合适规格的新保险丝。  
无法打开本机电源  
无法打开本机电源  
汽车电池保险丝已烧熔。  
关闭电源, 用一根细棒按复位孔。  
按下按钮时无任何反应。 违规操作。  
显示内容不正确。  
* 按下复位按钮时, 硬件复位后存的电台及  
相关移动设备均有记忆。  
音频输出连接不正确。  
检查连 并改正。  
音量过低。  
调高音量。  
/ 低音频输出  
扬声器损坏。  
更换扬声器。  
声音音量严重不平衡。  
将声道平衡调到中间位置。  
扬声器接 接触到汽车的金属部件。 将所有扬声器接 连接绝缘。  
線 線  
使用了非标准光碟。  
扬声器功率与本机不匹配。  
连接错误。  
使用标准光碟。  
更换扬声器。  
音质差或失真  
检查连 并改正。  
扬声器短路。  
检查连 并改正。  
发动机关闭时, 本机会复  
与电池之间的连接错误。  
检查连 并改正。  
ACC  
屏幕  
TFT  
显示警告信息  
刹车 连接不正确。  
检查接  
碟片的色彩模式与屏幕不匹配。  
使用非正版碟片。  
调整  
或屏幕的色彩。  
DVD  
请使用正版碟片。  
屏幕闪烁或有干扰。  
错误的视频信号。  
检查相关 束是否正确连接。  
播放机  
CD/VCD/DVD  
已装入其它光碟。  
碟片槽中有 物。  
退出光碟, 再装入新光碟。  
无法装入光碟。  
务必取出 物。  
光碟 污。  
用软布清洁光碟。  
声音跳跃或嘈杂。  
光碟严重刮伤或变形。  
用无刮伤的光碟更。  
当汽车停泊在潮湿场所时, 内部透  
镜上会凝结水珠。  
刚打开电源时, 音质很差。  
打开电源, 等待 1 小时让其晾乾。  
随身碟  
设备  
/SD  
反转随身碟  
试。  
设备的连接方向, 然后重  
/SD  
随身碟  
设备的插入方向错误。  
/SD  
无法插入随身碟 / 设备。  
SD  
随身碟  
随身碟  
接头破损。  
设备损坏。  
换台新的随身碟  
设备。  
/SD  
/SD  
/SD  
断开随身碟  
设备的连接, 然后重新连  
/SD  
接。 如果仍无法识别设备, 换一个随身碟 /  
设备。  
无法识别随身碟 / 设备。  
SD  
接头松脱。  
SD  
播放文件不识别 / 播放质量 文件类别或编码信息与机器系统不兼 建议使用同本机兼容的视频格式转换软  
差。  
容。  
行有效格式的转。  
36  
支持格式  
Video  
文件  
支持的  
文件  
视频编码  
音频编码  
视频码率  
音频采样率  
格式  
Profile  
扩展名  
MPEG-2:  
Simle,  
Main,  
*.mpg  
*.mpeg  
*.dat  
MPEG  
AC3  
PCM  
MP3  
MPEG-1  
MPEG-2  
MPEG  
High  
*.vob  
MPEG2:  
Simple,  
Main,  
MPEG  
MP3  
AC3  
Avi  
AVI  
*.avi, *.xvid  
PCM  
AAC  
(MPEG2,MPEG4)  
High  
FLAC  
MPEG4:  
".rm",  
COOK  
AAC  
MP3  
RM  
FLV  
RV8/9/10  
N/A  
".rmvb"  
8KHz/16KHz/1/32KHz  
11KHz/22K/44KHz  
12KHz/24K/48KHz  
H.264:  
Baseline,  
Main,  
PCM  
MP3  
AAC  
H264, SH.263  
*.flv  
Dolby AC3  
EAC3  
High  
MP3,  
PCM,  
32KHz/44.1KHz/48KHz  
MPEG4:  
MPEG4,  
MPEG-1/2,  
H264,  
Advanced Simple,  
Simple MPEG2:  
AC3,  
ASF/  
WMV  
Cook  
*.asf  
AAC,  
Bitrate:  
40Mbps  
Resolution:  
1080p  
44.1KHz  
Simple, Main,  
High  
H263  
mpeg,  
aac_pure  
APE  
8 ~ 96KHz  
AAC,  
MP2,  
FrameRate:  
30fps  
MPEG4,  
H.264,  
MPEG4:  
Advanced Simple,  
Simple H.264:  
Main,  
FLA  
MP3,  
*.mp4,  
*.mov  
C8~192KHz  
MP4  
MKV  
OGM  
AC3,  
SH. 263,  
MPEG1/2  
PCM,  
AAC(HE-AAC)  
8 ~ 96KHz  
AAC_PURE,  
MPEG  
MP2,  
MP3,  
MPEG-1 layer1/2  
MPEG1/2,  
MPEG4,  
H264,  
32KHz/44.1KHz/48KHz  
MPEG2:  
Simpe,  
AC3,  
AAC,  
MPEG-2 layer1/2  
Main,  
*.mkv  
RV8/9/10,  
SH.263,  
H.263  
PCM,  
32KHz/44.1KHz/48KHz  
High MPEG4:  
Advanced  
mpeg,  
aac_pure,  
flac  
mp3  
AC3  
MPEG2:  
Main,High  
MPEG-2;  
MPEG-4;  
H.264;  
RV8/9/10;  
H.263  
PCM  
MPEG4:  
*.ogm  
MPEG  
AAC,  
Advanced Simple,  
Simple H.263:  
Baseline  
RA_COOK,  
VOBIS  
37  
支持格式  
Audio  
文件  
格式  
文件  
支持的音频  
编码  
音频采样率  
支持  
扩展名  
*.mp1  
*.mp2  
*.mp3  
MP3  
MP1/MP2/MP3  
8KHz/16KHz/1/32KHz  
11KHz/22KHz/44KHz  
支持  
AAC  
*.aac  
*.flac  
AAC  
8 ~ 96KHz  
支持  
FLAC  
FLAC  
8~192KHz  
支持  
APE  
*.ape  
APE  
8 ~ 96KHz  
Picture  
文件  
格式  
文件  
限制  
扩展名  
baseline:  
width* height <4096*4096  
*.jpg  
JPEG  
*.jpeg  
PNG  
GIF  
*.png  
*.gif  
width * height <4096*4096  
width * height <4096*4096  
38  
支持格式  
DVD file  
Video  
文件  
格式  
文件  
扩展名  
视频编码  
支持的 Profile  
音频编码  
视频码率  
音频码率  
.mpg  
.mpeg  
.dat  
mpeg,  
AC3,  
MPEG-1 Video  
MPEG-2 Video  
main  
high  
MPEG2 Video: 10Mbps  
MPEG4 Video: 10Mbps  
MPEG  
PCM  
.vob  
MPEG2: Main, High  
upto 720*576  
MP2,MP3,  
AC3,PCM  
WMA  
MPEG2 Video: 10Mbps  
MPEG4 Video: 10Mbps  
AVI  
Avi(MPEG2,MPEG4,)  
*.avi, *.xvid  
MPEG4: Advanced  
Simple, Simple  
800*600  
MPEG4: Advanced  
Simple, Simple  
800*600  
MP3, PCM,  
AC3  
audio (wma)  
bitrate(32k~192k)  
ASF  
MPEG-4 video  
MPEG 4 Video  
*.asf,  
MPEG4:  
Advanced Simple,  
Simple800*600.  
AAC,MP2,  
MP3,AC3  
MP4  
.mp4, .mov  
MPEG4 Video: 10Mbps  
FLV  
H.263  
H.263 main  
.flv,.f4v  
.dat  
mpeg  
3Mbps  
3Mbps  
DAT  
MPEG1  
MPEG1 main  
mpeg,pcm,ac3  
MPEG2: Main, High  
upto 720*576  
VOB  
MPEG2  
.vob  
mpeg,pcm,ac3  
10Mbps  
mp3  
AC3  
MPEG2: Main, High  
MPEG2,  
MPEG4  
MPEG2 Video: 10Mbps  
MPEG4 Video: 10Mbps  
OGM  
*.ogm  
MPEG4: Advanced  
Simple, Simple  
LPCM  
MPEG  
Audio  
文件  
格式  
支持的音频  
编码  
支持的文件  
音频码率  
MP3  
.mp3 .mp2  
MP1/MP2/MP3/pcm  
8kbps~320kbps  
M4A  
AAC  
.m4a  
.aac  
aac  
aac  
32Kbps~320Kbps  
32Kbps~320Kbps  
Picture  
文件  
格式  
支持的文件  
限制  
baseline jpeg, Decoding source picture size up to 8784x5856  
progressive jpeg Re-sample to 720x480 and 720x576  
JPEG  
39  
Designed and enginereed by Blaupunkt  

Viper Vr 6000 User Manual
Shure Battery Charger Sbc210 User Manual
Sears 20071232 User Manual
MAKITA HM1511 User Manual
LG CMS4360F User Manual
D LINK DES 3326S User Manual
Dek Generator User Manual
DACOR IF42NBOL 02 User Manual
ASUS U305C User Manual
ACER CHROMEBOOK 511 C741 User Manual