VP249 Series
LCD Monitor
User Guide
Table of contents
Notices......................................................................................................... iv
Safety Information ...................................................................................... vi
Care & Cleaning........................................................................................ viii
Takeback Services...................................................................................... ix
1.1
1.2
1.3
1.4
Welcome! ...................................................................................... 1-1
Package contents......................................................................... 1-1
Assembling the monitor base..................................................... 1-2
Connect cables............................................................................. 1-3
1.4.1
Rear of the LCD monitor................................................. 1-3
1.5
Monitor introduction.................................................................... 1-4
1.5.1
1.5.2
Using the Controls button ............................................... 1-4
QuickFit Function............................................................ 1-6
2.1
2.2
3.1
Detaching the base (for VESA wall mount) ............................... 2-1
Adjusting the monitor.................................................................. 2-2
OSD (On-Screen Display) menu ................................................. 3-1
3.1.1
How to reconfigure.......................................................... 3-1
3.1.2
OSD Function Introduction.............................................. 3-2
3.2
3.3
3.4
Specifications............................................................................. 3-14
Troubleshooting (FAQ).............................................................. 3-15
Supported Timing List............................................................... 3-16
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This product implements power management functionality. In case of no
signal input after 10 seconds, the product automatically goes to sleep/
standby mode.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for
energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
AEEE Yönetmeliine Uygundur
iv
TCO Information
Congratulations!
This product is TCO Certified — for Sustainable IT
TCO Certified is an international third party
sustainability certification for IT products. TCO Certified
ensures that the manufacture, use and recycling of IT
products reflect environmental, social and economic
responsibility. Every TCO Certified product model is
verified by an accredited independent test laboratory.
This product has been verified to meet all the criteria in TCO Certified, including:
•
•
•
•
Corporate Social Responsibility: Socially responsible production -
working conditions and labor law in manufacturing country.
Energy Efficiency: Energy efficiency of product and power supply.
Energy Star compliant, where applicable.
Environmental Management System: Manufacturer must be certified
according to either ISO 14001 or EMAS.
Minimization of Hazardous Substances: Limits on cadmium,
mercury, lead & hexavalent chromium including requirements for
mercury-free products, halogenated substances and hazardous flame
retardants.
•
•
Design for Recycling: Coding of plastics for easy recycling. Limit on
the number of different plastics used.
Product Lifetime, Product Take Back: Minimum one-year product
warranty. Minimum three-year availability of spare parts. Product
takeback.
•
•
Packaging: Limits on hazardous substances in product packaging.
Packaging prepared for recycling.
Ergonomic, User-centered design: Visual ergonomics in products
with a display. Adjustability for user comfort (displays, headsets)
Acoustic performance protection against sound spikes (headsets) and
fan noise (projectors, computers) Ergonomically designed keyboard
(notebooks).
•
Electrical Safety, minimal electro-magnetic Emissions Third
Party Testing: All certified product models have been tested in an
independent, accredited laboratory.
where you can also find a searchable database of all TCO Certified IT products.
v
TCO Development, the organization behind TCO Certified, has been
an international driver in the field of Sustainable IT for 20 years. Criteria
in TCO Certified are developed in collaboration with scientists, experts,
users and manufacturers. Organizations around the world rely on TCO
Certified as a tool to help them reach their sustainable IT goals. We are
owned by TCO, a non-profit organization representing office workers.
TCO Development is headquartered in Stockholm, Sweden, with regional
presence in North America and Asia.
For more information, please visit www.tcodevelopment.com.
Safety Information
•
•
•
•
•
Before setting up the monitor, carefully read all the documentation that
came with the package.
To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
•
•
Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
vi
•
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100-240V AC.
•
•
•
The socket-outlet shall be installed near the equipment and shall be
easily accessible.
If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
This product may contain chemicals known to the State of California
to cause cancer, and birth defects or other reproductive harm. Wash
hands after handling.
•
This product complies with the “India E-Waste (Management) Rules,
2016” and prohibits use of lead, mercury, hexavalent chromium,
polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers
(PBDEs) in concentrations exceeding 0.1 % by weight in homogenous
materials and 0.01 % by weight in homogenous materials for cadmium,
except for the exemptions listed in Schedule II of the Rule.
vii
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
•
•
You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying
to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
viii
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for our customers to be able to responsibly recycle our products,
batteries and other components as well as the packaging materials.
information in different region.
ix
1.1
Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
Monitor Base
Quick Start Guide
Warranty Card
1x Power Cord
1x DVI cable (optional)
1x VGA cable
1x HDMI cable (optional)
1x DP cable (optional)
1x Audio cable (optional)
•
If any of the above items is damaged or missing, contact your retailer
immediately.
CAUTION
ASUS LCD Monitor VP249 Series
1-1
1.3
Assembling the monitor base
1. Have the front of the monitor face down on a table.
2. Attach the base to the arm.
3. Turn the screw clockwise to secure the base. Then adjust the monitor
to the angle that is most comfortable for you.
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Chapter 1: Product Introduction
1-2
1.4
Connect cables
1.4.1
Rear of the LCD monitor
D
V
I
V
G
A
HDMI
V
G
A
1
2
3
2
4
1
3
4
VGA
DVI
VGA
HDMI
5
7
8
6
7
VP249N
VP249H
HDMI
V
G
A
1
2
3
2
4
HDMI
VGA
5
9
7
8
VP249Q
1. Controls button
2. Speakers
6. DVI port
7. VGA port
3. AC-IN port
8. Audio-IN port
9. DisplayPort
4. Kensington Lock
5. HDMI port
ASUS LCD Monitor VP249 Series
1-3
1.5
Monitor introduction
1.5.1
Using the Controls button
Use the controls button on the back of the monitor to adjust the image
settings. Touch key 1-6 to activate the key list page.
Menu
Close
Menu
Close
Auto AutoAdjust
QuickFit
Input Select
QuickFit
Brightness
Brightness
Blue Light Filter
Blue Light Filter
1
2
3
3
4
5
6
1
2
3
3
4
5
6
1
2
4
5
6
7
1
2
4
5
6
7
VP249N
VP249H & VP249Q
1.
2.
3.
Shortcut Key2:
•
•
This is a Shortcut key. The default setting is Blue Light Filter.
Shortcut Key1:
This is a Shortcut key. The default setting is Brightness.
QuickFit Button:
•
•
This is a hotkey to activate the QuickFit function designed for
alignment.
The QuickFit function contains several pages of common grid
details.
4.
Auto Adjust Button (for VP249N model only): Automatically
perform Auto Adjust (only available for VGA input).
Chapter 1: Product Introduction
1-4
Input Button (for VP249H / VP249Q models only): Switch the input
source.
5.
6.
Close Button:
•
•
Exit the OSD menu.
Menu Button:
Enter the OSD menu.
7.
Power Button/Power Indicator:
•
•
Press this button to turn the monitor on/off.
The color definition of the power indicator is as the table below.
Status
White
Amber
OFF
Description
ON
Standby mode
OFF
ASUS LCD Monitor VP249 Series
1-5
1.5.2
QuickFit Function
The QuickFit function contains three patterns: (1) Grid (2) Paper size (3)
Photo size.
QuickFit has three patterns:
1. Grid pattern: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment Grid
2. Paper size: Provides users to view their documents in real size on the
screen.
B5
Letter
B5
Letter
EXIT
3. Photo size: Provides photographers and other users to accurately
view and edit their photos in real size on the screen.
2x2
8x10
4x6
3x5
5x7
Chapter 1: Product Introduction
1-6
2.1 Detaching the base (for VESA wall mount)
To detach the base, perform the following:
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Turn the screw counter-clockwise to loosen the screw located at the
bottom of the base.
3. Remove the base from the stand.
4. Remove the stand cover. Then remove the 4 rubber tabs from the
wall mount screw holes.
5. Align and install the wall mount bracket on the rear of the monitor.
Screw holes for VESA wall mount
(100 x 100 mm)
•
•
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Hold the base while removing the screw.
•
•
The VESA wall mount kit (100 x 100 mm) is purchased separately.
Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm).
Chapter 2: Setup
2-1
2.2
Adjusting the monitor
•
For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
•
•
Hold the stand to prevent the monitor from falling while changing its
angle.
You can adjust the monitor’s angle from -5˚ to 22˚.
-5˚ to +22˚
•
It is normal that the monitor slightly shakes while you adjust the viewing
angle.
ASUS LCD Monitor VP249 Series
2-2
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Splendid
Scenery mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB Mode
Reading Mode
Darkroom Mode
1. Press the MENU button to activate the OSD menu.
2. Press the and buttons to toggle between options in the
Menu. As you move from one icon to another, the option name is
highlighted.
3. To select the highlighted item on the menu, press the
button.
buttons to select the desired parameter.
button to enter the slide bar and then use the
4. Press the
5. Press the
and
and
buttons, according to the indicators on the menu, to make your
changes.
6. Select
to return to previous menu or
to accept and return to
previous menu.
Chapter 3: General Instruction
3-1
3.1.2
1. Splendid
This function contains eight sub-functions that you can select for
OSD Function Introduction
your preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Splendid
Scenery mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB Mode
Reading Mode
Darkroom Mode
•
•
•
•
•
Scenery mode: This is the best choice for scenery photo
displaying with SPLENDID™ Video Intelligence Technology.
Standard Mode: This is the best choice for document editing
with SPLENDID™ Video Intelligence Technology.
Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence Technology.
Game Mode: This is the best choice for game playing with
SPLENDID™ Video Intelligence Technology.
Night View Mode: This is the best choice for playing dark-scene
game or watching dark-scene movie with SPLENDID™ Video
Intelligence Technology.
•
•
•
sRGB Mode: This is the best choice for viewing photos and
graphics from PCs.
Reading Mode: This is the best choice for book reading with
SPLENDID™ Video Intelligence Technology.
Darkroom Mode: This is the best choice for a weak ambient
light environmen with SPLENDID™ Video Intelligence
Technology.
ASUS LCD Monitor VP249 Series
3-2
•
•
•
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and ASCR
functions are not user-configurable.
In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness,
Brightness, Contrast, and ASCR functions are not user-configurable.
In the Reading Mode, the Saturation, SkinTone, ASCR, Contrast, and Color
Temp. functions are not user-configurable.
2.
Blue Light Filter
In this function, you can adjust the blue light filter level.
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Blue Light Filter
Level 0
Level 1
Level 2
Level 3
Level 4
•
•
Level 0: No change.
Level 1~4: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated, the default settings of Racing
Mode will be automatically imported. Between Level 1 to Level 3,
the Brightness function is user-configurable. Level 4 is optimized
setting. It is compliance with TUV Low Blue Light Certification.
The Brightness function is not user-configurable.
•
Users should take some time away from the display if working for long
hours: It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
•
•
To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
Eye exercises can help to reduce eye strain. Repeat these exercises often.
If eye strain continues, please contact a physician. Eye exercoses: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
•
High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Use Blue Light Filter to reduce 70% (max.) harmful
blue light to avoiding CVS (Computer Vision Syndrome).
Chapter 3: General Instruction
3-3
3. Color
Select the image color you like from this function.
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Color
Brightness
Contrast
Saturation
Color Temp.
Skin Tone
•
•
•
•
Brightness: Adjust the brightness level. The adjusting range is
from 0 to 100.
Contrast: Adjust the contrast level. The adjusting range is from
0 to 100.
Saturation: Adjust the saturation level. The adjusting range is
from 0 to 100.
Color Temp.: Select the desired color temperature. Available
options: Cool, Normal, Warm, and User Mode.
•
In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0 ~ 100.
•
Skin Tone: Select the desired skin color. Available options:
Reddish, Natural, and Yellowish.
ASUS LCD Monitor VP249 Series
3-4
4. Image
You can adjust the image Sharpness, Aspect Control, VividPixel,
ASCR, Position, Focus, and Auto Adjust from this main function.
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Image
Sharpness
Trace Free
Aspect Control
VividPixel
ASCR
Position
Focus
Auto Adjust
•
•
•
Sharpness: Adjust the picture sharpness. The adjusting range
is from 0 to 100.
Trace Free: Speeds up the response time by Over Drive
technology. The adjusting range is from lower 0 to faster 100.
Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or "
OverScan".
•
•
4:3 is only available when input source is in 4:3 format.
OverScan is only available for HDMI input.
•
VividPixel: ASUS Exclusive Technol ogy that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjusting range is from 0~100.
•
•
ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
Position: Adjust the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
•
•
Focus: Reduce the Horizonal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100.
Auto Adjust: Automatically perform Auto Adjust (only available
for VGA input).
Chapter 3: General Instruction
3-5
5. Input Select
Select the input source.
VP249N
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Input Select
VGA
DVI
VP249H
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Input Select
VGA
HDMI
ASUS LCD Monitor VP249 Series
3-6
VP249Q
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Input Select
VGA
HDMI
DisplayPort
Chapter 3: General Instruction
3-7
6. System Setup
Adjust the system configuration.
VP249N
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
System Setup
Splendid Demo Mode
GamePlus
ECO Mode
OSD Setup
Language
Key Lock
Information
More
(Page 1/2)
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
System Setup
Back
Power Indicator
Power Key Lock
All Reset
(Page 2/2)
ASUS LCD Monitor VP249 Series
3-8
VP249H / VP249Q
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
System Setup
Splendid Demo Mode
Volume
GamePlus
ECO Mode
OSD Setup
Language
Key Lock
More
(Page 1/2)
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
System Setup
Back
Information
Power Indicator
Power Key Lock
All Reset
(Page 2/2)
•
•
•
Splendid Demo Mode: Activate the demo mode for the
Splendid function.
Volume (for VP249H / VP249Q models only): Adjust the volume
level.
GamePlus: The GamePlus Function provides a toolkit and
creates a better gaming environment for users when playing
different types of games. Particularly, Crosshair function is
specially designed for new gamers or beginners interested in
First Person Shooter (FPS) games.
Chapter 3: General Instruction
3-9
•
•
ECO Mode: Activate the ecology mode for power saving.
OSD Setup: Adjust the OSD Timeout, DDC/CI, and
Transparency of the OSD screen.
•
•
Language: Select OSD language.
Key Lock: Pressing the second button on the right for more than
five seconds to activate the key lock function.
•
•
•
•
•
•
Information: Display the monitor information.
More: Return the next page of System Setting.
Back: Return the previous page of System Setting.
Power Indicator: Turn the power LED indicator on/off.
Power Key Lock: Disable/Enable the power key.
All Reset: Select YES to revert all settings to the factory default
mode.
7. Shortcut
Assign the specific function to the two shortcut keys.
VP249N
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Shortcut
Shortcut 1
Shortcut 2
Blue Light Filter
Splendid
Brightness
Auto Adjust
Contrast
Color Temp.
GamePlus
(Shortcut 1)
ASUS LCD Monitor VP249 Series
3-10
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Shortcut
Shortcut 1
Shortcut 2
Blue Light Filter
Splendid
Brightness
Auto Adjust
Contrast
Color Temp.
GamePlus
(Shortcut 2)
VP249H / VP249Q
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Shortcut
Shortcut 1
Shortcut 2
Blue Light Filter
Splendid
Brightness
Auto Adjust
Contrast
Color Temp.
Volume
GamePlus
(Shortcut 1)
Chapter 3: General Instruction
3-11
VP249
Standard Mode VGA 1920 x 1080 @ 60Hz
Shortcut
Shortcut 1
Shortcut 2
Blue Light Filter
Splendid
Brightness
Auto Adjust
Contrast
Color Temp.
Volume
GamePlus
(Shortcut 2)
•
•
Shortcut 1: Assign a function to the Shortcut Key1.
Available options: Blue Light Filter, Splendid, Brightness,
Auto Adjust, Contrast, Color Temp., Volume (for VP249H /
VP249Q models only), and GamePlus. The default setting is
Brightness
.
Shortcut 2: Assign a function to the Shortcut Key2.
Available options: Blue Light Filter, Splendid, Brightness,
Auto Adjust, Contrast, Color Temp., Volume (for VP249H /
VP249Q models only), and GamePlus. The default setting is
Blue Light Filter.
ASUS LCD Monitor VP249 Series
3-12
3.1.2.1 GamePlus Function
The GamePlus Function provides a toolkit and creates a better gaming
environment for users when playing different types of games. The
Crosshair overlay with four different crosshair options lets you choose the
one that best suits the game you’re playing. The onscreen Timer can be
positioned on the left of the display to keep track of the elapsed gaming
time.
To activate GamePlus:
1. Press the Menu button to activate the OSD menu.
2. Press the
or
button to enter the Shortcut menu.
button to select Shortcut. Then press the
3. Press the
or
button to select Shortcut 1 or Shortcut 2.
4. Press the
5. Press the
button to enter the Shortcut 1 or Shortcut 2 submenu.
or button to select GamePlus. Then press the
button to confirm the GamePlus submenu.
6. Press the
the
or
button to confirm the selection.
button to select Crosshair or Timer. Then press
7. Press the
button repeatedly to exit the OSD menu.
8. Press the assigned Shortcut Key1 or Shortcut Key2 to activate the
GamePlus main menu.
GamePlus Main Menu
GamePlus - Crosshair
GamePlus
Crosshair
Timer
(Practice Mode)
GamePlus - Timer
GamePlus - Timer - Position
Position
Chapter 3: General Instruction
3-13
3.2
Specifications
Model
VP249N
VP249H
VP249Q
23.8 inches (60.5 cm) diagonal
(Active Display Area: 527.04 (H) x 296.46 (V) mm)
Panel Size
Max. Resolution
1920 x 1080
250 cd/m2
1000:1
Brightness (Typ.)
Contrast Ratio (Typ.)
Viewing Angle
(CR≤10)
178°(V); 178°(H)
Display Colors
16.7M colors (6 bits + FRC)
Response Time (Typ.) 5ms (GTG )
Inputs:
1 VGA, 1 DVI
1 VGA, 1 HDMI
1 VGA, 1 DP, 1 HDMI
Terminals
Audio
input:
N/A
Yes
Speaker
output:
Audio
Speaker
N/A
1.5W x 2
Power consumption
≤ 20W
Standby power
consumption
< 0.5W at AC110V~ AC220V
< 0.5W at AC110V~ AC220V
393.0 x 541.1 x 215.0 mm
465±5 x 603±5 x 126±5 mm
Power off power
consumption
Phys. Dimension (incl.
base) (HxWxD)
Box Dimension
(HxWxD)
Net Weight (incl. stand) 3.58 ±1.0 kg
Gross Weight (Esti.)
VESA Wall Mounting
Voltage Rating
5.13 ±1.0 kg
100 x 100 mm
AC 100 - 240V
Operating temperature: 0~40˚C
Temperature
Accessories
Storage temperature: -30 ~ 65˚C
Power cable, Quick Start Guide, Warranty card,
DVI cable (optional), VGA cable (optional), HDMI cable (optional),
DP cable (optional), Audio cable (optional)
CE, CB, FCC, CCC, CU, RCM, UL/cUL, UKrSEPRO, BSMI,
MSIP(KCC), KC(EK), E-Standby, PSE, VCCI, Energy Star 7.0, HDMI
Regulation approvals (VP249H/Q only), Windows 7 & 8.1 & 10 WHQL, GEMS, TCO7.0,
China Energy Label, RoHS, WEEE, EuP( Energy Saving Only),
DP(VP249Q only), J-MOSS, EPEAT
*Specifications subject to change without notice.
ASUS LCD Monitor VP249 Series
3-14
3.3
Troubleshooting (FAQ)
Problem
Possible Solution
button to check if the monitor is in the
Power LED is not ON
•
•
•
Press the
ON mode.
Check if the power cord is properly connected to the
monitor and the power outlet.
Check Power Indicator function in main menu OSD.
Select “ON“ to turn on power LED.
The power LED lights amber and
there is no screen image
•
•
Check if the monitor and the computer are in the
ON mode.
Make sure the signal cable is properly connected
the monitor and the computer.
•
•
Inspect the signal cable and make sure none of the
pins are bent.
Connect the computer with another available
monitor to check if the computer is properly working.
Screen image is too light or dark
•
Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
•
•
Make sure the signal cable is properly connected to
the monitor and the computer.
Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
•
Inspect the signal cable and make sure that none of
the pins are bent.
•
•
Perform Reset via OSD.
Select the appropriate Color Temperature via OSD.
No sound or sound is low
•
•
Adjust the volume settings of both your monitor and
computer.
Make sure the computer sound card driver is
properly installed and activated.
Chapter 3: General Instruction
3-15
3.4 Supported Timing List
VESA / IBM Modes Support Timing
Horizontal
Frequency
(KHz)
Vertical
Frequency
(Hz)
Resolution
(active dot)
Resolution
(total dot)
Nominal Pixel
Color (MHz)
Mode
DOS
720x400@70Hz
640x480@60Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1152x864@75Hz
1280x1024@60Hz
1280x1024@75Hz
1280x960@60Hz
1280x800@60Hz
1280x720@60Hz
1280x768@60Hz
1360x768@60Hz
1366x768@60Hz
1440x900@60Hz
1600x1200@60Hz
900 x 449
800 x 525
31.469
31.469
37.861
37.500
35.156
37.879
48.077
46.875
48.363
56.476
60.023
67.5
70.087
59.940
72.809
75.000
56.250
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
60.000
59.870
60.015
59.790
59.887
60.000
59.954
60.000
66.66
28.322
25.175
31.500
31.500
36.000
40.000
50.000
49.500
65.000
75.000
78.750
108.00
108.000
135.00
108.00
83.500
74.25
VGA
832 x 520
840 x 500
1024 x 625
1056 x 628
1040 x 666
1056 x 625
1344 x 806
1328 x 806
1312 x 800
1600 x 900
1688 x 1066
1688 x 1066
1800 x 1000
1680 x 831
1650 x 750
1664 x 798
1792 x 795
1792 x 798
1904 x 934
2160 x 1250
2240 x 1089
2200 x 1125
864 x 525
SVGA
XGA
VESA
SXGA
63.981
79.976
60.000
49.702
45.00
WXGA
47.776
47.712
47.712
55.935
75.000
65.290
67.500
35
79.5
85.500
85.500
106.500
162.000
146.250
148.500
30.24
WXGA+
UXGA
WSXGA+ 1680x1050@60Hz
WUXGA 1920x1080@60Hz
MAC
832x624@75Hz
SVGA
1152 x 667
49.714
74.533
57.27
* Modes not listed in the table may not be supported. For optimal resolution, we recommend that
you choose a mode listed in the table above.
ASUS LCD Monitor VP249 Series
3-16
|