Hardware Explanations
I/O Ports Overview
LED Lights Overview
USB 3.2 Gen 1 port
USB 2.0 port
DCIN port
Power switch
LAN ports 1-4
WPS button
WPS
LAN
WAN
2.5G
2.4GHz 5GHz POWER
WAN port
LED on/off button
Reset button
2.5G port
Quick
Start Guide
Specifications:
RT-AX86U Pro
DC Power adapter
DC Output: +12V with 3.0A current
DC Output: +19.5V with 2.31A current
Wireless-AX5700 Dual-band Gigabit Router
Operating Temperature
Operating Humidity
0~40oC
Storage
Storage
0~70oC
50~90%
20~90%
WE SUGGEST...
One Router Setup Steps
Prepare your Modem
01
1
Unplug the power of cable / DSL modem. If it
has a battery backup, remove the battery.
2
3
Connect your modem to WAN port at the back side of the router with the
network cable provided.
4
Check the modem LED lights to ensure the connection is active.
Power on the modem. Plug modem to the power
outlet and power on.
Unplug
If you are using DSL for internet,
you will need your username
/ password from your Internet
service provider (ISP) to properly
configure your router.
Modem back
Modem back
Modem front
Install your Router
02
1
Plug the adapter into the DCIN port, and press the Power switch.
2
The power LED will light up when the hardware is ready.
– Via app
3
[App] On your iOS or Android mobile device, go
to the app store, search for ASUS Router, and
download the app.
4
[App] On your iOS or Android mobile device, tap Settings > Wi-Fi, connect
to the default network SSID shown on the product label on the back side of
the router. Or scan the QR code on the product label to connect the default
network SSID.
5
[App] Launch ASUS Router App and follow the
instructions to complete the setup.
ꢀꢁꢂꢃꢄꢅꢁ
ꢆꢇꢈꢃꢉꢊꢋꢌꢍꢁꢎꢌꢁꢍꢊꢏꢁꢍꢇꢐ
ꢀꢁꢂꢃꢄꢅꢆꢇꢀꢈꢉꢁꢇꢊꢋꢋꢌꢍꢎꢏ
ꢐꢋꢑꢋ_ꢒꢒ
* XX refers to the last two digits
of MAC address. You can find it
on the label on the back of your
router.
ꢏꢑꢒꢓꢑ
– Or via web browser
[Wireless] Connect to the network with
default SSID shown on the product label on
the back side of your router “ASUS_XX”.
4
[Wired / Wireless] Open a web browser.
3
[Wired] Connect your PC
to LAN port at the back
side of the router using
an additional network
cable.
You will be redirected to the ASUS Setup Wizard. If not, navigate to
Follow the instructions to
complete the setup.
ꢀꢁꢂꢃꢄꢅꢁꢆꢇꢄꢆꢈꢉꢊꢋꢌꢍꢎꢏꢆꢐꢑꢄ
ꢒꢑꢁꢓꢇꢁꢆꢋꢆꢔꢁꢕꢆꢔꢁꢇꢕꢄꢑ
ꢋꢖꢗꢓꢘꢃꢁꢖꢆꢙꢁꢇꢇꢚꢘꢛꢜ
2.5G Port WAN Type Setup Steps
Prepare your Router
Login and Connect – Setting to 2.5G WAN under factory default settings
01
02
Connect the modem to the 2.5G port with a network cable.
2
[ASUS Setup Wizard] Select “2.5G Ethernet”, then follow the instructions to
1
[ASUS Setup Wizard] Select “manual setting”.
complete the setup of SSID and login information.
ꢌꢍꢃꢎꢏꢃꢉꢐꢍꢑꢒꢉꢋꢁꢉꢂꢆꢃꢉꢇꢎꢓꢍꢃꢉꢂꢊꢉꢔꢕ ꢉꢐꢊꢄꢂꢉꢖꢉꢗꢘꢏꢂꢃꢙꢉꢚꢋꢍꢍꢉꢛꢃꢂꢃꢇꢂꢉꢘꢊꢑꢄ
ꢁꢃꢂꢚꢊꢄꢈꢉꢏꢃꢂꢂꢋꢁꢒꢉꢎꢑꢂꢊꢙꢎꢂꢋꢇꢎꢍꢍꢘꢉꢖ
ꢅꢆꢇꢈꢉꢊꢁꢁꢃꢋꢂꢌꢊꢁꢈꢍꢎꢏꢃ
ꢀꢁꢂꢃꢄꢁꢃꢂ
ꢀꢁꢂꢃꢄꢁꢃꢂ
ꢅꢆꢃꢇꢈꢉꢅꢊꢁꢁꢃꢇꢂꢋꢊꢁ
ꢉꢊꢁꢁꢃꢋꢂꢌꢊꢁꢈꢂꢎꢏꢃ
ꢅꢆꢇꢈꢐꢊꢄꢂ
ꢑꢒꢓꢔꢈꢕꢂ ꢃꢄꢁꢃꢂ
ꢐꢄꢃꢖꢌꢊꢗꢘ
ꢜꢎꢁꢑꢎꢍꢉꢗꢃꢂꢂꢋꢁꢒ
ꢌꢄꢃꢝꢋꢊꢑꢏ
|