246721-YTG-C-0606
®
TECHNICAL
GUIDE
DESCRIPTION
ASHRAE 90.1 COMPLIANT
®
®
YORK Predator MagnaDry™ units are convertible single
packages with a common footprint cabinet and common roof
curb for all 7-1/2 through 12-1/2 ton models. All units have
two compressors with independent refrigeration circuits to
provide 2 stages of cooling. The units were designed for light
commercial applications and can be easily installed on a roof
curb, slab, or frame.
MagnaDRY™
SINGLE PACKAGE AIR CONDITIONERS
AND SINGLE PACKAGE GAS/ELECTRIC
UNITS
®
All Predator MagnaDry™ units are self-contained and
assembled on rigid full perimeter base rails allowing for 3-way
forklift access and overhead rigging. Every unit is completely
charged, wired, piped, and tested at the factory to provide a
quick and easy field installation.
DR090, 120 and 150
All units are convertible between side and down airflow. Inde-
pendent economizer designs are used on side and down dis-
charge applications, as well as all tonnage sizes.
®
Predator MagnaDry™ units are available in the following
configurations: cooling only, cooling with electric heat, and
cooling with gas heat. Electric heaters are available as fac-
tory-installed options or field-installed accessories.
®
The Predator MagnaDry™ provides energy-savings, effi-
cient removal of moisture through a balanced coil design.
Because the unit doesn’t increase sensible cooling, it allows
temperatures to be maintained within the comfort zone.
Unlike competitive systems, you’re not subjected to over
cooling. You save through more efficient matching of dehu-
midification and cooling needs. This makes the MagnaDry™
perfect for applications that need to remove large amounts of
moisture or maintain low humidity levels.
DR090, 120
Tested in accordance with:
DR150
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
246721-YTG-C-0606
14 ELECTRICAL DATA DR120 WITH PWRD
26 BLOWER PERFORMANCE DR150 SIDEFLOW . . . . . . . 37
CONVENIENCE OUTLET . . . . . . . . . . . . . . . . . . . . . . . . . 27
27 BLOWER PERFORMANCE DR150 SIDEFLOW
15 ELECTRICAL DATA DR150 W/O PWRD
ECONOMIZER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
CONVENIENCE OUTLET . . . . . . . . . . . . . . . . . . . . . . . . . 28
28 BLOWER PERFORMANCE DR150 DOWNFLOW . . . . . 39
16 ELECTRICAL DATA DR150 W/PWRD
29 BLOWER PERFORMANCE DR150 DOWNFLOW
CONVENIENCE OUTLET . . . . . . . . . . . . . . . . . . . . . . . . . 28
ECONOMIZER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
17 ELECTRIC HEAT MULTIPLIERS . . . . . . . . . . . . . . . . . . . 28
18 BLOWER PERFORMANCE DR090 SIDEFLOW . . . . . . . 29
30 ADDITIONAL STATIC RESISTANCE. . . . . . . . . . . . . . . . 41
31 ELECTRIC HEAT MINIMUM SUPPLY AIR CFM . . . . . . . 41
32 INDOOR BLOWER SPECIFICATIONS . . . . . . . . . . . . . . 41
33 POWER EXHAUST SPECIFICATIONS . . . . . . . . . . . . . . 41
34 4 POINT LOAD WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . 42
35 6 POINT LOAD WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . 42
36 UNIT WEIGHT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
37 UNIT CLEARANCES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
38 ECONOMIZER USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . 48
19 BLOWER PERFORMANCE DR090
SIDEFLOW ECONOMIZER. . . . . . . . . . . . . . . . . . . . . . . . 30
20 BLOWER PERFORMANCE DR090 DOWNFLOW . . . . . . 31
21 BLOWER PERFORMANCE DR090 DOWNFLOW
ECONOMIZER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
22 BLOWER PERFORMANCE DR120 SIDEFLOW . . . . . . . 33
23 BLOWER PERFORMANCE DR120 SIDEFLOW
ECONOMIZER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
24 BLOWER PERFORMANCE DR120 DOWNFLOW . . . . . . 35
25 BLOWER PERFORMANCE DR120 DOWNFLOW
ECONOMIZER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Unitary Products Group
3
246721-YTG-C-0606
Filter drier (solid core)
S implicity® control board w/
screw connector for T-stat wiring
and network connections
Disconnect location
(optional disconnect switch)
Filter access (2” throw-away)
Terminal block for
hi-voltage connection
Condenser section
Second model
nameplate
inside hinged
access panel
Slide-out motor and
blower assembly fo
easy adjustment
and service
Dual stage
cooling for
maximum
comfort
Belt-drive
blower motor
Power ventor motor
Compressor #2
access (high-
efficiency com-
pressor w/crank-
case heater)
20-gauge alumi-
nized steel tubular
heat exchanger for
long life (stainless
steel option)
Two-stage gas
heating to maintain
warm, comfortable
temperature
Base rails w/forklift
slots (three sides)
and lifting holes
Slide-out drain pan
withsteel3/4” NPT,
female connection
Roof curbs in eight- and fourteen-
inch heights. Roof curbs for transi-
tioning from York Sunline™ foot-
print to the DH Series footprints
are also available
Intelligent control
board for safe and
efficient operation
Compressor #1 access
(high-efficiency compres-
sor w/crankcase heater)
Side entry power
and control wiring
knockouts
Tool-less door latch
(field-installed accessory)
®
FIGURE 1 - PREDATOR MagnaDRY™ DR090, 120
4
Unitary Products Group
246721-YTG-C-0606
Simplicity™ Control
board w/screw
Disconnect
location (optional
disconnect switch)
Filter access
(2" throw-away)
Second model
nameplate inside
hinged access panel
connectors for T-stat
wiring and Network
Connection
Filter drier (solid core)
Condenser Section
Dual stage cooling
for maximum
comfort
Belt-drive blower
motor
Slide out motor
and blower
Compressor #2
access
assembly for easy
adjustment and
service
(high-efficiency
compressor w/
crankcase heater)
Power ventor
motor
20-gauge
aluminized steel
tubular heat
exchanger for
long life
Base rails w/
forklift slots
( three sides)
and lifting
holes
(stainless steel
option)
Roof curbs in eight-and
fourteen-inch heights.
Roof curbs for
Slide-out drain pan
with brass ¾" NPT,
female connection
Two-stage gas heating to
maintain warm,
comfortable temperature
transitioning from York Tool-less door
Sunline TM footprint to
the DM/DH/DJ Series
latch
Compressor #1 access
(high-efficiency
Side entry power
and control wiring
knockouts
Intelligent control
board for safe and
efficient operation
footprint are available
(field-installed accessory)
compressor w/crankcase
heater)
®
FIGURE 2 - PREDATOR MagnaDRY™ DR150
Both the unit control board and ignition control board utilize
flash codes to aid in diagnosis of unit malfunctions. Unique
alarm codes quickly identify the source of the unit alarm.
FEATURES
•
High Efficiency – High efficiency units reach as high as
11.2 EER. Gas/electric units have electronic spark igni-
tion and power vented combustion with steady state effi-
ciencies of 80%. These efficiencies exceed all legislated
minimum levels and provide low operating costs.
All units use the same standard filter size. This standard-
ization removes any confusion on which filter sizes are
needed for replacement.
The non-corrosive drain pan slides out of the unit to per-
mit easy cleaning. The drain pan is accessed by remov-
ing the drain pan cover plate on the rear of the unit. Once
the plate is removed, the drain pan slides out through the
rear of the unit.
®
•
Service Friendly – The Predator incorporates a num-
ber of enhancements which improve serviceability.
The motor and blower slide out of the unit as a common
assembly. This facilitates greater access to all the indoor
airflow components, thus simplifying maintenance and
adjustment.
®
All Predator units have a second model nameplate
located inside the control access door. This is to prevent
deterioration of the nameplate through weathering.
Service time is reduced through the use of hinged, tool-
less panels. Such panels provide access to frequently
inspected components and areas, including the control
box, compressors, filters, indoor motor & blower, and the
heating section. The panels are screwed in place at the
factory to prevent access by children or other unautho-
rized persons. It is recommended that the panels be
secured with screws once service is complete.
•
•
Environmentally Aware – For improved Indoor Air Quality,
foil faced insulation is used exclusively throughout the units.
®
Balanced Heating – The Predator offers “Ultimate Heat-
st
nd
ing Comfort” with a balance between 1 and 2 stage
®
gas heating. The first stage of a gas heat Predator unit
provides 60% of the heating capacity. Balanced heating
allows the unit to better maintain desired temperatures.
Service windows have been placed in both condenser
section walls. Rotation of the cover allows easy access
to the condenser coils for cleaning or inspection.
•
Convertible Airflow Design – The side duct openings
are covered when they leave the factory. If a side supply/
Unitary Products Group
5
246721-YTG-C-0606
return is desired, the installer simply removes the two
side duct covers from the outside of the unit and installs
them over the down shot openings. No panel cutting is
required. Convertible airflow design allows maximum
field flexibility and minimum inventory.
Alarms and programmed values are retained
through the loss of power.
•
•
Reliable – From the beginning – All units undergo com-
puter automated testing before they leave the factory.
Units are tested for refrigerant charge and pressure, unit
amperage, and 100% functionality. For the long term –
•
System Protection - Suction line freezestats are sup-
plied on all units to protect against loss of charge and coil
frosting when the economizer operates at low outdoor air
temperatures while the compressors are running. Every
unit has solid-core liquid line filter-driers and high and low-
pressure switches. Internal compressor protection is stan-
dard on all compressors. Crankcase heaters are standard
on reciprocating compressors. Scroll compressors do not
require crankcase heaters. Phase Monitors are standard
on units with scroll compressors. This accessory monitors
the incoming power to the unit and protects the unit from
phase loss and reversed phase rotation.
®
All Predator units are painted with a long lasting, pow-
der paint that stands up over the life of the unit. The paint
used has been proven by a 1000 hour salt spray test.
Flexible Placement – All models and configurations
share the same cabinet/footprint and thus the same roof
curb. You have the flexibility to set one curb and choose
the correct tonnage size and heating option after the
internal loads have been determined.
®
To further simplify planning and installation, Predator
cabinets are designed to fit your roof. With the optional
roof curb, the unit ductwork is designed to fit around 24”
on-center joists or between 48” on-center joists.
•
Advanced Controls - S implicity® control boards have
standardized a number of features previously available
only as options or by utilizing additional controls.
The drain pan can be rotated to drain to either the front
or the rear of the unit. Additionally, the drain pan can be
fitted to drain through the roof curb. As it is sometimes
difficult to have a level installation, the drain pan features
a generous slope to ensure proper drainage.
•
Low Ambient - An integrated low-ambient control
allows all units to operate in the cooling mode down
to 0°F outdoor ambient without additional assis-
tance. Optionally, the control board can be pro-
grammed to lockout the compressors when the
outdoor air temperature is low or when free cooling
is available.
•
•
Full Perimeter Base Rails – The permanently attached
base rails provide a solid foundation for the entire unit and
protect the unit during shipment. The rails offer forklift
access from 3 sides, and rigging holes are available so that
an overhead crane can be used to place the units on a roof.
•
Anti-Short Cycle Protection - To aid compressor
life, an anti-short cycle delay is incorporated into the
standard controls. Compressor reliability is further
ensured by programmable minimum run times. For
testing, the anti-short cycle delay can be temporarily
overridden with the push of a button.
Easy Installation – Gas and electric utility knockouts are
supplied in the unit underside as well as the side of the unit.
A clearly identified location is provided to mount a field sup-
plied electrical disconnect switch. Utility connections can be
made quickly and with a minimum amount of field labor.
•
•
Fan Delays - Fan on and fan off delays are fully pro-
grammable. Furthermore, the heating and cooling
fan delay times are independent of one another. All
units are programmed with default values based
upon their configuration of cooling and heat.
All units are shipped with 2” throw-away filters installed.
•
•
Wide Range of Indoor Airflows – All indoor fan motors
are belt-drive type providing maximum flexibility to han-
dle most airflow requirements. For high static applica-
tions, factory installed alternate indoor fan motors are
available. With the optional indoor fan motor, all units can
supply nominal airflow at a minimum of 1.5” ESP.
Safety Monitoring - The control board monitors the
high and low-pressure switches, the freezestats, the
gas valve, if applicable, and the temperature limit
switch on gas and electric heat units. The unit con-
trol board will alarm on ignition failures, compressor
lockouts and repeated limit switch trips.
Warranty - All models include a 1-year limited warranty
on the complete unit. Compressors and electric heater
elements each carry a 5-year warranty. Aluminized steel
and stainless steel tubular heat exchangers carry a 10-
year warranty.
•
•
Nuisance Trip Protection and Strikes - To prevent
nuisance trouble calls, the control board uses a
“three times, you’re out” philosophy. The high and
low-pressure switches and the freezestats must trip
three times within two hours before the unit control
board will lock out the associated compressor.
FACTORY INSTALLED OPTIONS
®
YORK offers several equipment options factory installed, for
®
the Predator line.
On Board Diagnostics - Each alarm will energize a
trouble light on the thermostat, if so equipped, and
flash an alarm code on the control board LED. Each
high and low-pressure switch alarm as well as each
freezestat alarm has its own flash code. The control
board saves the five most recent alarms in memory,
and these alarms can be reviewed at any time.
•
Optional Factory Installed Economizers - Predator
units offer a variety of optional factory installed econo-
mizers with low leak dampers. The outdoor air enthalpy
sensor enables economizer operation if the outdoor
enthalpy is less than the setpoint of the economizer logic
module. See Table 38 to determine the correct econo-
mizer for your application.
6
Unitary Products Group
246721-YTG-C-0606
•
Downflow Economizer - (With barometric relief) -
•
Alternate Indoor Blower Motor - For applications with
high static restrictions, units are offered with optional
indoor motors that provide higher static output and/or
higher airflow, depending upon the installer’s needs.
The economizer is provided with a single enthalpy
input. The economizer is 2% low leakage type, and is
shipped installed and wired. The installer needs only
to assemble and mount the outdoor air hood (Pro-
vided). The economizer has spring return, fully modu-
lating damper actuators and is capable of introducing
up to 100% outdoor air. As the outdoor air intake
dampers open, the return air dampers close. The
changeover from mechanical refrigeration to econo-
mizer operation is regulated by the standard single
enthalpy input. There is an optional input dual dry
bulb available. To meet regulated air standards, the
•
•
Aluminized Steel Gas Heat Exchanger - For applica-
tions in non-corrosive environments.
Stainless Steel Gas Heat Exchanger - For applications
in corrosive environments, this option provides a full
stainless steel heat exchanger assembly.
•
•
Stainless Steel Drain Pan - Provides years of trouble
free operation in corrosive environments.
Electric Heaters - The electric heaters range from 9kW
to 54kW and are available in all the voltage options of the
base units. All heaters are dual staged. All heaters are
intended for single point power supply.
economizer control accepts an optional CO input for
2
demand ventilation. With single enthalpy input, the
economizer control monitors outdoor air. The dual
enthalpy kit provides a second input used to monitor
the return air. With a dual input kit installed, the econ-
omizer control compares the values of the two
enthalpy or temperature inputs and positions the
dampers to provide the maximum efficiency possible.
•
•
Disconnect Switch - For gas heat units and cooling
units with electric heat, a HACR breaker sized to the unit
is provided. For cooling only units, a switch sized to the
largest electric heat available for the particular unit is
provided. Factory installed option only.
•
•
Horizontal Economizer - (Without barometric
relief) - All features of the downflow economizer
exist except you must order the duct mount baro-
metric relief separately. You must order a 1EH0408
if you are installing a power exhaust. You can
order a 1RD0411 Barometric Relief for horizontal
flow economizers only.
Convenience Outlet - (Non-Powered/Powered) - This
option locates a 120V single-phase GFCI outlet with
cover, on the corner of the unit housing adjacent to the
compressors. The “Non-powered” option requires the
installer to provide the 120V single-phase power source
and wiring. The “Powered” option is powered by a step-
down transformer in the unit. Factory installed option only.
Slab Economizer for Energy Recovery Ventila-
tors- (With barometric relief and Fresh Air Hood)
- The economizer is provided with a single enthalpy
input. The economizer is 2% low leakage type, and
is shipped installed and wired. The economizer has
spring return, fully modulating damper actuators and
is capable of introducing up to 100% outdoor air. As
the outdoor air intake dampers open, the return air
dampers close. The changeover from mechanical
refrigeration to economizer operation is regulated by
the standard single enthalpy input. There is an
optional input dual dry bulb available. To meet regu-
lated air standards, the economizer control accepts
•
Smoke Detectors - The smoke detectors stop operation
of the unit by interrupting power to the control board if
smoke is detected within the air compartment. Available
for both the supply and/or return air.
Factory installed smoke detectors in the return air,
may be subjected to freezing temperatures during
"off" times due to out side air infiltration. These
smoke detectors have an operational limit of 32 °F
to 131°F. Smoke detectors installed in areas that
could be out side those limitations will have to be
moved to prevent having false alarms.
an optional CO input for demand ventilation.With
2
single enthalpy input, the economizer control moni-
tors outdoor air. The dual enthalpy kit provides a
second input used to monitor the return air. With a
dual input kit installed, the economizer control com-
pares the values of the two enthalpy or temperature
inputs and positions the dampers to provide the
maximum efficiency possible.
•
•
Phase Monitors - Designed to prevent unit damage. The
phase monitor will shut the unit down in an out-of phase
condition. (Standard on units with Scroll Compressors.)
Coil Guard - Customers can purchase a coil guard kit to
protect the condenser coil from damage. Additionally,
this kit stops animals and foreign objects from entering
the space between the inner condenser coil and the
main cabinet. This is not a hail guard kit.
•
•
Power Exhaust (Downflow only) - This accessory
installs in the unit with a down flow economizer.
Motorized Outdoor Air Damper - The motorized out-
door air damper includes a slide-in/plug-in damper
assembly with an outdoor air hood and filters. The out-
door air dampers open to the preset position when the
indoor fan motor is energized. The damper has a range
of 0% to 100% outdoor air entry. Factory installed option
or field installed accessory.
•
Dirty Filter Switch - This kit includes a differential pres-
sure switch that energizes the fault light on the unit ther-
mostat, indicating that there is an abnormally high
pressure drop across the filters. Factory installed option
or field installed accessory.
Unitary Products Group
7
246721-YTG-C-0606
•
•
•
Technicoat Condenser Coils - The condenser coils are
coated with a phenolic coating for protection against cor-
rosion due to harsh environments.
Includes air supply sensor, return air sensor, dirty filter
indicator switch, and air proving switch.
FIELD INSTALLED ACCESSORIES
Technicoat Evaporator Coil - The evaporator coils are
coated with a phenolic coating for protection against cor-
rosion due to harsh environments.
®
YORK offers several equipment accessories for field instal-
®
lation, for the Predator line.
BAS - Building Automation System Controls
•
Downflow Economizer - (With barometric relief) - The
economizer is provided with a single enthalpy input. The
economizer is 2% low leakage type. The economizer has
spring return, fully modulating damper actuators and is
capable of introducing up to 100% outdoor air. As the out-
door air intake dampers open, the return air dampers
close. The changeover from mechanical refrigeration to
economizer operation is regulated by the standard single
enthalpy input. There is an optional input dual dry bulb
available. To meet regulated air standards, the economizer
S implicity® Intelli-Comfort™ Control - The York
S implicity® Intelli-Comfort™ control is factory installed. It
includes a supply air sensor, a return air sensor, and an
outside air sensor. There are provisions for a field
installed dirty filter indicator switch, an air-proving switch,
an Outside Air Humidity sensor, a Return Air Humidity
sensor, an Inside IAQ sensor, and an Outside Air IAQ
sensor. Construction mode operation, 365-day real time
clock with 7 day programming plus holiday scheduling is
built-in. Two different modes of demand ventilation are
control accepts an optional CO input for demand ventila-
2
achieved through the Intelli-Comfort™ using CO
2
tion. With single enthalpy input, the economizer control
monitors outdoor air. The dual enthalpy kit provides a sec-
ond input used to monitor the return air. With a dual input
kit installed, the economizer control compares the values
of the two enthalpy or temperature inputs and positions the
dampers to provide the maximum efficiency possible.
sensors. It uses an inside CO sensor to perform
2
Demand Ventilation. It can also use an Outside CO
2
sensor to perform Differential Demand Ventilation. It
uses a Patented Comfort Ventilation algorithm to provide
comfortable ventilation air temperature. The patented
economizer-loading algorithm will protect the equipment
when harsh operating conditions exist. Humidity in the
occupied space or return duct can be monitored and
controlled via humidity sensors and the on-board
connection for hot gas re-heat system. It uses the
Intelli-Start algorithm to maximize energy savings by
recovering the building from the Unoccupied Setpoints to
the Occupied Setpoints just in time for the Occupied
Time Period to begin. The S implicity® Intelli-Comfort™
balances space temperature, ventilation air temperature,
•
•
Horizontal Economizer - (Without barometric relief) -
All features of the downflow economizer exist except you
must order the duct mount barometric relief separately.
You must order a 1EH0408 if you are installing a
power exhaust. You can order a 1RD0411 Barometric
Relief for horizontal flow economizer.
Slab Economizer for Energy Recovery Ventilator-
(Without barometric relief or Fresh Air Hood) - The
economizer is provided with a single enthalpy input. The
economizer is 2% low leakage type. The economizer has
spring return, fully modulating damper actuators and is
capable of introducing up to 100% outdoor air. As the out-
door air intake dampers open, the return air dampers
close. The changeover from mechanical refrigeration to
economizer operation is regulated by the standard single
enthalpy input. There is an optional input dual dry bulb
available. To meet regulated air standards, the economizer
CO and humidity for ultimate comfort.
2
•
S implicity® Intelli-Comfort™ with ModLINC Control -
The York S implicity® Intelli-Comfort™ with ModLINC
control is factory installed. It includes all the features of
the Intelli-Comfort™ control with an additional control to
translate communications from MODBUS to the BACnet
MSTP protocol.
•
•
•
Novar® BAS Control - The Novar® ETC-3 building
automation system controller is factory installed. Incudes
supply air sensor, return air sensor, dirty filter indicator
switch, and air proving switch.
control accepts an optional CO input for demand ventila-
2
tion.With single enthalpy input, the economizer control
monitors outdoor air. The dual enthalpy kit provides a sec-
ond input used to monitor the return air. With a dual input
kit installed, the economizer control compares the values
of the two enthalpy or temperature inputs and positions the
dampers to provide the maximum efficiency possible.
Johnson Controls BAS Control - The Johnson Control
YK-UNT-1126 building automation system controller is
factory installed. Includes supply air sensor, return air
sensor, dirty filter indicator switch, and air proving switch.
You can order 1EH0409 Barometric Relief/FA Hood for
field installations without an ERV.
CPC BAS Control - The Computer Process Controls
Model 810-3060 ARTC Advanced Rooftop building auto-
mation system controller is factory installed. Includes
supply air sensor, return air sensor, dirty filter indicator
switch and air proving switch.
•
•
Dual Enthalpy Control, Accessory - This kit contains
the required components to convert a single enthalpy
economizer to dual enthalpy.
Barometric Relief Damper - Zero to 100% capacity
barometric relief dampers for use with horizontal flow, or
field installed slab economizers.
•
Honeywell BAS Control - The Honeywell W7750C
building automation system controller is factory installed.
8
Unitary Products Group
246721-YTG-C-0606
•
•
•
Power Exhaust - This accessory installs in the unit with
a down flow economizer. Power exhaust plugs into the
connector in the unit bulkhead. You must purchase
1EH0408 barometric relief when applying to a hori-
zontal flow application.
included with the heaters. All heaters are intended for
single point power supply.
•
Low Limit / Compressor Lockout Kit
1. Compressor Lockout (CLO): To prevent mechanical
(compressorized) operation of the unit during cold
outdoor conditions where there is a risk of returning
liquid refrigerant back to the compressors.
Manual Outdoor Air Damper - Like the motorized out-
door air damper, each manual outdoor air damper
includes a slide-in damper assembly with an outdoor air
hood and filters. Customers have a choice of dampers
with ranges of 0% to 100% or 0% to 35% outdoor air entry.
2. Low Limit Control (LLC): To prevent the supply air
from dropping below a specified setpoint by utilizing
the units first stage heating means when there is a
demand for cooling during cold outside conditions.
Motorized Outdoor Air Damper - The motorized out-
door air damper includes a slide-in/plug-in damper
assembly with an outdoor air hood and filters. The out-
door air dampers open to the preset position when the
indoor fan motor is energized. The damper has a range
of 0% to 100% outdoor air entry. Factory installed option
or field installed accessory.
•
Metal Frame Filter Kit - Metal frame with polyester filter
medium.
•
•
Permanent Filters - Permanent filters are available.
Roof Curbs - The roof curbs have insulated decks and
are shipped disassembled The roof curbs are available
in 8” and 14” heights. For applications with security con-
cerns, burglar bars are available for the duct openings of
the roof curbs.
•
•
•
Smoke Detectors - The smoke detectors stop operation
of the unit by interrupting power to the control board if
smoke is detected within the air compartment.
•
Roof Curb Transition - Single Piece Adapter (10” High) -
CO Sensor - Senses CO levels and automatically
2
2
Roof curbs for transitioning from Sunline™ units to Pred-
overrides the economizer when levels rise above the
preset limits.
®
ator units. Fits 7.5 to 12.5 Sunline™ roof curbs only.
Dirty Filter Switch - This kit includes a differential pres-
sure switch that energizes the fault light on the unit ther-
mostat, indicating that there is an abnormally high
pressure drop across the filters.
•
•
Burglar Bars - Mount in the supply and return openings
to prevent entry into the duct work.
Thermostat - The units are designed to operate with 24-
volt electronic and electro-mechanical thermostats. All
units (with or without an economizer) operate with two-
stage heat/two-stage cool or two-stage cooling only ther-
mostats, depending upon unit configuration.
•
•
Coil Guard - Field installed decorative wire coil guard.
Hail Guard - This kit includes a sloped hood which installs
over the outside condenser coil and prevents damage to
the coil fins from hail strikes. Field installed accessory only.
REHEAT MODE SEQUENCE OF OPERATION
•
•
Flue Exhaust Extension Kit - In locations with wind or
weather conditions which may interfere with proper
exhausting of furnace combustion products, this kit can
be installed to prevent the flue exhaust from entering
nearby fresh air intakes.
The reheat control board allows the user to select two differ-
ent modes of operation via a jumper connection on the
board. (See Figure 3.) Each mode is described below. Refer
to Figures 3 - 5 when reading this section.
-60°F Gas Heat Kit - For installations which require gas
heat units to perform in low ambient temperatures, a gas
section heating kit is available. This kit provides electric
heat in the gas heat controls section to ensure the gas
valve and controls will continue to function properly at
extremely low temperatures.
“NORMAL” MODE
When the reheat control board (RCB) detects a need for
dehumidification (24VAC) at "HUM" via the field supplied
dehumidistat connected to RHTB-1 and RHTB-2 and there is
not a call for cooling, it energizes the hot gas relay (HGR),
which energizes the 3-way valve (SOL 3), the condenser coil
valve (SOL 2), and de-energizes the reheat coil bleed valve
(SOL 1). (In the DR150, SOL 2 is only energized when the
discharge pressure in circuit #1 rises above 235 psig and de-
energizes SOL 2 after the discharge pressure falls below 175
psig. Both outdoor fans of circuit #1 in the DR150 also disen-
gage to conserve energy.) The Y1 signal is passed to the unit
control board (UCB), which engages circuit # 1, resulting in
circuit #1 reheat mode operation.
•
•
•
•
Gas Heat High Altitude Kit - This kit converts a gas heat
unit to operate at high altitudes, 2,000 to 6,000 feet. Con-
version kits are available for natural gas and propane.
Gas Heat Propane Conversion Kit - This kit converts a
gas-fired heater from natural gas to propane. It contains the
main burner orifices and gas valve replacement springs.
Gas Piping Kit - Contains pipe nipples, fittings and gas
cock required for gas supply connection with external
shut off.
When the room thermostat calls for first stage cooling, with or
without a call for dehumidification, the RCB senses a signal
through "Y1", de-energizing the HGR, which de-energizes
SOL 3 and SOL 2 and energizes SOL 1, engaging circuit #1,
resulting in circuit #1 cooling mode operation.
Electric Heaters - The electric heaters range from 9 kW
to 54kW and are available in all the voltage options of the
base units. All heaters are dual staged. Cooling units
include an adapter panel for easy installation of the elec-
tric heaters. Necessary hardware and connectors are
Unitary Products Group
9
246721-YTG-C-0606
When the room thermostat calls for second stage cooling, the
RCB senses a signal through "Y1" & "Y2" and engages circuit
#1 and circuit #2 in cooling mode.
falls below 175 psig. Both outdoor fans of circuit #1 in the
DR150 also disengage to conserve energy.) The unit then
operates with circuit #1 in reheat mode and circuit #2 in cool-
ing mode.
Indoor blower operation is initiated upon a call for first stage
cooling, second stage cooling or dehumidification.
When the room thermostat calls for first stage cooling while
there is still a call for dehumidification, no operational change
is made. The call for cooling is ignored and the unit continues
to operate with circuit #1 in reheat mode and circuit #2 in
cooling mode.
Anytime there is a call for 2 stages of cooling, the unit will not
operate in the reheat mode, even if there is a call for dehu-
midification at "HUM".
The unit will not operate in the reheat mode if there is any call
for heating.
When the room thermostat calls for second stage cooling, the
RCB senses a signal through "Y1" and "Y2" and de-ener-
gizes the HGR, which de-energizes SOL 3 and SOL 2, and
energizes SOL 1. Both circuits operate in the cooling mode.
On units with economizers, the unit will not operate in the
reheat mode if there is a call for cooling and the economizer
is operating as first stage of cooling.
Indoor blower operation is initiated upon a call for first stage
cooling, second stage cooling or dehumidification.
All safety devices function as previously described.
"ALTERNATE” MODE
Anytime there is a call for 2 stages of cooling, the unit will not
operate in the reheat mode, even if there is still a call for
dehumidification at "HUM".
When the RCB detects a need for dehumidification (24VAC)
at "HUM" via the field supplied dehumidistat connected to
RHTB-1 and RHTB-2, and there is not a call for cooling, it
energizes the HGR, which energizes the SOL 3, SOL 2, and
de-energizes SOL 1. (In the DR150, SOL 2 is only energized
when the discharge pressure in circuit #1 rises above 235
psig and de-energizes SOL 2 after the discharge pressure
The unit will not operate in the reheat mode if there is any call
for heating.
All safety devices function as previously described.
R
Y1
Y2
P4
K1
G
W1
W2
K2
OCC
K4
C
K3
COM
`
P6
P5
P3
HGRR
HGR
HUM
DEHUMIDISTAT
HARNESS
CONNECTION
MODE
SELECTION
JUMPER
FIGURE 3 - REHEAT CONTROL BOARD
10
Unitary Products Group
246721-YTG-C-0606
FIGURE 4 - DR090 & 120 REHEAT CONTROLS
Unitary Products Group
11
246721-YTG-C-0606
FIGURE 5 - DR150 REHEAT CONTROLS
12
Unitary Products Group
246721-YTG-C-0606
TABLE 1: ACCESSORIES
Part Number
Description
Weight
1RC0470
Roof Curb, 8" Height
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1RC0471
Roof Curb, 14" Height
1RC0472
Roof Curb, Transition (7.5 T through 12.5 T)
Burglar Bars, Downflow
Electric Heat 9kW 230V
Electric Heat 18kW 230V
Electric Heat 24kW 230V
Electric Heat 36kW 230V
Electric Heat 54kW 230V
Electric Heat 9kW 460V
Electric Heat 18kW 460V
Electric Heat 24kW 460V
Electric Heat 36kW 460V
Electric Heat 54kW 460V
Electric Heat 9kW 575V
Electric Heat 18kW 575V
Electric Heat 24kW 575V
Electric Heat 36kW 575V
Electric Heat 54kW 575V
1BD0408
2TP04520925
2TP04521825
2TP04522425
2TP04523625
2TP04525425
2TP04520946
2TP04521846
2TP04522446
2TP04523646
2TP04525446
2TP04520958
2TP04521858
2TP04522458
2TP04523658
2TP04525458
1FA0411
Manual Outside Air Damper 0-35%, Downflow (Incl. Hood, Damper & Filters, No Barometric Relief)
Manual Outside Air Damper 0-100%, Downflow (Incl. Hood, Damper & Filters, No Barometric Relief)
Motorized Damper, Downflow (Incl. Hood, Damper & Filter, no Barometric Relief)
Motorized Damper, Horizontal (Incl. Hood, Damper & Filter, no Barometric Relief)
Economizer, Downflow (Incl. Barometric Relief & All Hoods)
Economizer, Horizontal (Incl. Dampers & Hoods, no Barometric Relief)
Economizer, Slab, Downflow (Incl. Dampers only no Hoods or Barometric Relief)
Power Exhaust, Downflow, 230V (For Units with Economizer only)
Power Exhaust, Downflow, 460V(For Units with Economizer only)
Power Exhaust, Downflow, 580V (For Units with Economizer only)
Dual Enthalpy Control (Use with Single Enthalpy Economizer)
Hood Kit, Downflow Economizer (Included with all Downflow Economizers)
Barometric Relief Kit, Ductmount for Horizontal Application (Incl. Damper & Hood)
Barometric Relief Kit, Ductmount for Horizontal Application w/Power Exhaust (Incl. Damper & Hood)
Barometric Relief / Hood Kit, for Field Installed Slab Econ. w/o ERV (Incl. Barometric Relief & FA Hood)
CO2 Detector Unit Mount
1FA0412
2MD04702724
2MD04703324
2EE04705024
2EE04705124
2EE04705224
2PE04703225
2PE04703246
2PE04703258
2EC04700924
1EH0407
124 lbs.
97 lbs.
-
-
-
-
1RD0411
1EH0408
25 lbs.
1EH0409
-
-
-
-
2AQ04700424
2AQ04700324
2SD04700424
2MK04700624
1CG0419
CO2 Detector Space Mount
Smoke Detector, Supply or Return (Return Not Available with Horizontal Economizer)
Low Limit / Compressor Lockout Kit
Coil Guard (Electric / Electric & HP models): DR090 & 120
Coil Guard (Gas / Electric models): DR090 & 120
Coil Guard (Electric / Electric & HP models): DR150
Coil Guard (Gas / Electric models): DR150
-
-
1CG0420
1CG0424
1CG0425
1HG0411
Hail Guard Kit
-
-
-
-
-
-
-
-
-
-
-
-
1GP0404
Gas Piping Kit
1NP0441
Propane Conversion Kit
1HA0442
High Altitude Kit for Natural Gas
1HA0443
High Altitude Kit for Propane
1FE0411
Flue Exhaust Extension Kit
2BC04700106
2BC04700151
2BC04700154
1FL0402
Gas Heat Kit, -60 deg F, 230V
Gas Heat Kit, -60 deg F, 460V
Gas Heat Kit, -60 deg F, 575V
Permanent Filter Kit
2DF0401
Dirty Filter Switch
1FF0410
Filter Frame Kit, Metal
Unitary Products Group
13
246721-YTG-C-0606
NOMENCLATURE
®
7.5-12.5 Ton York Model Number Nomenclature
D R 090 N10 A 2 A AA 3 0 1 2 4 A
Product Category
Product Style
D = A/C, Single Pkg., R-22
A = Style A
B = Style B
C = Style C
Product Identifier
R = REHEAT
Configuration Options (not required for all units)
These four digits will not be assigned until a quote is requested, or an order placed.
SS Drain Pan
CPC Controller, DFS, APS
Nominal Cooling Capacity
Johnson Controller, DFS, APS
Honeywell Controller, DFS, APS
Novar Controller, DFS, APS
090 = 7.5 Ton
120 = 10.0 Ton
150 = 12.5 Ton
Simplicity IntelliComfort Controller
Simplicity IntelliComfort Controller w/ModLinc
2" Pleated filters
Heat Type and Nominal Heat Capacity
C00 = Cooling Only. No heat installed
BAS Ready Unit with Belimo Economizer
Shipping Bag
Any Combination of Additional Options that Don’t Have an Option Code Pre-assigned
Gas Heat Options
N10 = 100 MBH Output Aluminized Steel
N15 = 150 MBH Output Aluminized Steel
N20 = 200 MBH Output Aluminized Steel
S10 = 100 MBH Output Stainless Steel
S15 = 150 MBH Output Stainless Steel
S20 = 200 MBH Output Stainless Steel
Product Generation
3 = Third Generation
4 = Fourth Generation
Electric Heat Options
Additional Options
RC = Coil Guard, Shipping Bag & American Flag
TA = Technicoat Condenser Coil
E09 = 9 KW
E18 = 18 KW
E24 = 24 KW
E36 = 36 KW
E54 = 54 KW
AA = None
AB = Phase Monitor
AC = Coil Guard
AD = Dirty Filter Switch
TJ = Technicoat Evaporator Coil
TS = Technicoat Evaporator & Condenser Coils
AE = Phase Monitor & Coil Guard
AF = Phase Monitor & Dirty Filter Switch
AG = Coil Guard & Dirty Filter Switch
AH = Phase Monitor, Coil Guard & Dirty Filter Switch
Airflow
ZZ = If desired option combination is not listed above, ZZ will be assigned and configuration options will be
located in digits 15-18.
A = Std. Motor
B = Std. Motor/Econo./Barometric Relief (Downflow
Only)
C = Std. Motor/Econo./Power Exhaust (Downflow Only)
D = Std. Motor/Motorized Damper (Downflow Only)
E = Std. Motor/Horizontal Economizer (No Baro.)
F = Std. Motor/Slab Econo./Power Exhaust
(Downflow Only)
Installation Options
A = No Options Installed
B = Option 1
C = Option 2
G = Std. Motor/Slab Econo./Barometric Relief
(Downflow Only)
N = Hi Static Mtr.
D = Options 1 & 2
E = Option 3
F = Option 4
P = Hi Static Mtr./Econo./Barometric Relief
(Downflow Only)
Q = Hi Static Mtr./Econo./Power Exhaust
(Downflow Only)
G = Options 1 & 3
H = Options 1 & 4
J = Options 1, 2 & 3
K = Options 1, 2, & 4
L = Options 1,3 & 4
M = Options 1, 2, 3, & 4
N = Options 2 & 3
P = Options 2 & 4
Q = Options 2, 3, & 4
R = Options 3 & 4
S = Option 5
R = Hi Static Mtr./Motorized Damper (Downflow Only)
S = Hi Static Mtr./Horizontal Economizer (No Baro.)
T = Hi Static Mtr./Slab Econo./Power Exhaust
(Downflow Only)
U = Hi Static Mtr./Slab Econo./Barometric Relief
(Downflow only)
Voltage
T = Options 1 & 5
U = Options 1, 3, & 5
V = Options 1, 4, & 5
W = Options 1, 3, 4, & 5
X = Options 3 & 5
Y = Options 4 & 5
Z = Options 3, 4 & 5
2 = 208/230-3-60
4 = 460-3-60
5 = 575-3-60
Options
1 = Disconnect
2 = Non-Pwr'd Conv. Outlet
3 = Smoke Detector S.A.
4 = Smoke Detector R.A.
5 = Pwr'd Conv. Outlet
14
Unitary Products Group
246721-YTG-C-0606
TABLE 2: PHYSICAL DATA
Models
120
Component
90
150
Blower, Centrifugal (Dia. X Wd. In.)
Motor, Standard (HP)
Motor, Optional (HP)
Rows
15 x 15
1-1/2
15 x 15
15 x 15
Evaporator
Blower
2
3
4
3
5
4
2
3
Fins per Inch
Height (in.)
Face Area (ft.2)
Rows
Fins per Inch
15
32
10.6
2
13
28
15
40
13.2
2
13
36
15
40
13.2
2
13
36
Evaporator Coil
Reheat Coil
Height (in.)
Face Area (ft.2)
Quantity
7.8
2
10
2
10
4
Propeller Dia. (in., each)
Motor (HP, each)
CFM, Nominal (each)
Number of Coils
Rows (each)
24
1/3
3400
2
1
20
24
3/4
4400
2
2
20
24
1/3
3500
4
2
15
Condenser Fan
Condenser Coil
Fins per Inch
Height (in., each)
Face Area (ft.2 each)
System 1 (lb./oz.)
System 2 (lb./oz.)
Quantity
44
14.5
8/0
6/6
44
36
14.5
12/12
10/2
2
11.9
22/8
21/4
2
Refrigerant
Charge
2
Recip.
25 x 20 x 2
4
Compressors
Air Filters
Type
Recip.
25 x 20 x 2
4
Scroll
25 x 20 x 2
4
Size (Wd. X Ht. X Thickness in.)
Quantity
Unitary Products Group
15
246721-YTG-C-0606
TABLE 3: DR CAPACITY RATINGS
Cooling Capacity
Nominal
Electric
Heat
Gas Heat Capacity
Seasonal
1
Gas
Line
Size
ARI Ratings
Sound
Rating
Size
Model
CFM
Temp.
Rise
(°F)
2
3
Input
(MBH)
Output
(dB)
Capacity
(kW)
MBH
EER
IPLV
Efficiency
(%)
(in. OD)
(MBH)
Cooling
Only
-
-
-
-
-
-
-
-
-
-
-
Electric
Heat
9, 18, 24,
36
090
90
11.2
11.65 3000
84
90
86
Gas Heat
Gas Heat
-
-
120
180
96
80
80
15-45
30-60
3/4
3/4
144
Cooling
Only
-
-
-
-
-
-
-
-
-
-
-
Electric
Heat
18, 24, 36,
54
120
150
116
11.2
11.1
11.40 3480
Gas Heat
Gas Heat
-
-
180
240
144
192
80
80
20-50
35-65
3/4
3/4
Cooling
Only
-
-
-
-
-
-
-
-
-
-
-
Electric
Heat
18, 24, 36,
54
148
11.7
3750
Gas Heat
Gas Heat
-
-
180
240
144
192
80
80
10-40
25-55
3/4
3/4
1.
2.
3.
Rated at 95°F ambient 80°F dry bulb and 67°F wet bulb.
Rated in accordance with ARI 270 standard.
See Table 15.
TABLE 4: UNIT VOLTAGE LIMITATIONS
POWER RATING
208/230-3-60
460-3-60
MIN.
187
432
540
MAX.
252
504
575-3-60
630
16
Unitary Products Group
246721-YTG-C-0606
TABLE 5: COOLING CAPACITY DR090 UNIT
Air On
Temperature of Air on Condenser Coil 85°F
Evap. Coil
Temperature of Air on Condenser Coil 95°F
Total
Tot.
Sensible Capacity (MBH)
Return Dry Bulb (°F)
Total
Tot.
Sensible Capacity (MBH)
Return Dry Bulb (°F)
Cap.*
Input†
(kW)
Cap.*
Input†
(kW)
CFM
2250
WB (°F)
(MBH)
(MBH)
86
83
80
77
74
71
68
86
83
80
77
74
71
68
72
67
62
57
105
94
6.7
6.5
6.3
6.3
60
73
85
82
54
67
79
82
47
61
72
75
41
54
66
69
35
48
60
62
28
41
53
56
22
35
47
50
96
87
78
78
7.3
7.1
6.9
6.9
57
70
78
78
50
64
74
76
44
57
68
70
38
51
62
63
31
45
55
57
25
38
49
50
18
32
42
44
85
82
72
67
62
57
109
97
6.8
6.6
6.4
6.4
67
81
88
85
59
73
85
85
51
66
78
82
44
58
71
74
36
50
63
66
29
43
56
59
21
35
48
51
100
90
7.4
7.2
7.0
7.0
63
78
81
81
56
70
79
80
48
63
74
76
40
55
67
68
33
48
59
61
25
40
51
53
18
32
44
46
2625
3000
3375
3750
88
81
85
81
72
67
62
57
113
101
90
6.9
6.8
6.6
6.6
73
88
90
88
64
79
90
88
55
71
84
88
47
62
76
79
38
53
67
70
29
44
58
62
20
36
49
53
104
93
7.5
7.3
7.1
7.0
70
85
84
84
61
77
84
84
52
68
80
82
43
59
72
74
35
50
63
65
26
42
54
56
17
33
45
47
84
88
84
72
67
62
57
115
103
92
7.0
6.8
6.6
6.6
79
95
92
90
69
85
92
90
59
75
89
90
49
65
79
80
39
55
70
70
29
45
60
60
19
35
50
50
105
94
7.5
7.3
7.1
7.1
75
90
85
85
65
82
85
85
55
72
83
84
45
62
73
74
35
52
63
64
25
42
54
54
15
32
44
44
85
90
85
72
67
62
57
118
105
94
7.0
6.8
6.6
6.6
85
102
94
74
91
94
92
62
80
94
92
51
69
83
81
40
57
72
69
29
46
61
58
18
35
50
47
106
96
7.6
7.3
7.1
7.1
80
96
86
86
69
87
86
86
58
76
86
86
47
65
75
74
36
53
64
63
25
42
53
52
13
31
42
41
86
92
92
86
Temperature of Air on Condenser Coil 105°F
Temperature of Air on Condenser Coil 115°F
72
67
62
57
88
79
72
72
7.8
7.6
7.4
7.4
55
67
72
72
48
61
70
71
42
54
63
64
35
48
57
58
29
41
50
51
23
35
44
45
16
28
38
39
81
71
65
66
8.3
8.0
7.8
7.8
52
64
65
66
46
57
65
65
40
51
58
59
33
44
52
52
27
38
46
46
20
31
39
40
14
25
33
33
2250
2625
3000
3375
3750
72
67
62
57
91
82
74
75
7.9
7.6
7.4
7.4
61
74
74
75
53
67
73
74
46
59
69
70
38
51
61
63
31
44
54
55
23
36
46
47
15
29
39
40
83
74
68
68
8.4
8.1
7.9
7.9
58
70
68
68
51
63
67
68
43
55
64
64
36
48
56
57
28
40
49
49
21
33
41
42
13
25
34
34
72
67
62
57
95
85
77
77
8.0
7.7
7.5
7.5
67
81
77
77
58
73
77
77
50
64
75
76
41
55
66
67
32
47
57
59
23
38
49
50
15
29
40
41
86
76
70
71
8.5
8.2
8.0
8.0
65
76
70
71
56
69
70
71
47
60
69
70
38
51
61
61
30
43
52
52
21
34
43
44
12
25
34
35
72
67
62
57
95
85
78
78
8.0
7.8
7.6
7.6
72
83
78
78
62
77
78
78
52
68
76
77
42
58
67
67
32
48
57
57
22
38
47
47
12
28
37
37
86
76
70
71
8.6
8.3
8.0
8.1
69
76
70
71
59
73
70
71
49
63
70
70
39
53
60
60
29
43
50
50
19
33
40
40
9
23
30
30
72
67
62
57
96
86
78
78
8.1
7.8
7.6
7.6
77
86
78
78
66
82
78
78
55
71
78
78
44
60
67
67
33
49
56
56
21
37
45
45
10
26
33
33
86
76
70
71
8.6
8.4
8.1
8.2
74
76
70
71
63
76
70
71
52
66
70
71
40
55
59
59
29
44
47
48
18
33
36
37
7
21
25
26
Temperature of Air on Condenser Coil 125°F
72
67
62
57
73
64
59
61
8.8
8.5
8.2
8.3
50
60
59
61
44
54
59
60
37
47
54
53
31
41
47
47
25
35
41
41
18
28
34
34
12
22
28
28
2250
2625
3000
3375
3750
These capacities are gross ratings. For net capacity,
deduct air blower motor, MBh = 3.415 x kW. Refer to the
appropriate Blower Performance Table for the kW of the
supply air blower motor.
* -
† -
72
67
62
57
75
66
61
62
8.9
8.6
8.3
8.4
56
66
61
62
49
59
61
62
41
52
59
59
33
44
51
51
26
37
44
43
18
29
36
36
11
22
28
28
These ratings include the condenser fan motors (total 1
kW) and the compressor motors but not the supply air
blower motor.
72
67
62
57
77
67
62
64
9.0
8.6
8.4
8.5
62
67
62
64
53
65
62
64
45
56
62
64
36
48
55
55
27
39
46
46
18
30
38
37
10
21
29
29
-
No sensible cooling capacity.
72
67
62
57
76
67
62
64
9.1
8.7
8.5
8.6
66
67
62
64
56
67
62
64
46
59
62
63
36
49
53
53
27
39
43
43
17
29
33
33
7
19
23
23
72
67
62
57
76
66
61
63
9.2
8.9
8.6
8.7
71
66
61
63
60
66
61
63
48
61
61
63
37
50
50
52
26
39
39
41
15
28
28
30
4
17
17
18
Unitary Products Group
17
246721-YTG-C-0606
TABLE 6: COOLING CAPACITY DR090 UNIT (ALTERNATE REHEAT MODE)
Air On Evap. Coil
Temperature of Air on Condenser Coil 85°F
Temperature of Air on Condenser Coil 95°F
Tot.
Input†
Sensible Capacity (MBH)
Return Dry Bulb (°F)
Tot.
Input†
Sensible Capacity (MBH)
Return Dry Bulb (°F)
Total
Cap.*
(MBH)
Total
Cap.*
(MBH)
CFM
2250
WB (°F)
(kW)
86
83
80
77
74
71
68
(kW)
86
83
80
77
74
71
68
72
67
62
57
44
39
35
37
6.6
6.3
6.0
5.7
10
17
24
28
3
-
-
-
-
-
-
-
-
-
-
-
-
-
39
34
29
33
6.9
6.6
6.2
5.9
10
14
19
20
4
8
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
11
18
21
4
2
6
8
11
15
5
8
-
12
14
-
2
1
72
67
62
57
45
41
36
39
6.6
6.3
6.1
5.7
9
2
-
-
-
-
-
-
-
-
-
-
40
35
30
35
6.9
6.6
6.3
6.0
8
-
-
-
-
-
-
-
-
-
-
-
-
-
-
23
31
34
15
28
31
8
-
20
25
28
12
22
25
5
2625
3000
3375
3750
21
27
13
20
5
-
17
21
9
2
6
12
4
14
72
67
62
57
47
42
37
40
6.6
6.3
6.1
5.7
9
-
-
-
-
-
-
-
-
41
37
31
36
6.9
6.7
6.3
6.0
5
-
-
-
-
-
-
-
-
-
-
29
37
40
20
37
40
11
30
39
2
-
25
31
36
16
31
36
8
-
-
21
31
12
22
4
-
27
35
19
27
10
18
1
9
13
4
72
67
62
57
48
43
38
41
6.7
6.3
6.1
5.7
10
34
38
41
-
-
-
-
-
-
-
-
42
37
32
37
7.0
6.7
6.4
6.0
4
-
-
-
-
-
-
-
-
-
-
24
38
41
14
35
41
4
-
30
32
37
20
32
37
10
30
36
-
-
25
31
15
21
5
-
20
26
10
16
-
11
1
6
72
67
62
57
50
44
40
42
6.7
6.4
6.1
5.7
10
38
40
42
-
-
-
-
-
-
-
-
-
-
43
38
33
37
7.0
6.7
6.4
6.0
3
-
-
-
-
-
-
-
-
-
-
27
40
42
16
40
42
5
-
35
33
37
23
33
37
12
33
37
1
-
28
31
17
20
6
9
22
26
10
15
-
4
Temperature of Air on Condenser Coil 105°F
Temperature of Air on Condenser Coil 115°F
72
67
62
57
34
29
25
29
7.2
6.8
6.5
6.2
20
12
-
17
6
-
13
-
7
-
-
-
-
-
-
-
-
-
-
-
-
-
29
25
21
25
7.5
7.1
6.8
6.5
29
10
-
29
3
-
29
-
22
-
16
-
10
-
3
-
2250
2625
3000
3375
3750
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
72
67
62
57
35
30
26
30
7.2
6.9
6.5
6.2
11
17
13
13
5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
30
26
22
26
7.5
7.1
6.8
6.5
14
15
2
10
7
-
5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10
10
10
2
5
7
-
-
-
-
72
67
62
57
36
31
27
31
7.2
6.9
6.6
6.3
2
-
-
-
-
-
-
-
-
-
-
-
31
26
23
27
7.5
7.1
6.8
6.6
-
-
-
-
-
-
-
-
-
-
-
-
22
27
31
14
27
31
5
-
20
23
27
11
23
27
2
-
24
31
15
22
6
-
20
27
11
18
2
9
-
14
5
1
72
67
62
57
36
32
27
31
7.3
6.9
6.6
6.3
-
-
-
-
-
-
-
-
-
-
-
-
30
26
22
26
7.6
7.2
6.9
6.6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
26
27
31
17
27
31
7
-
22
22
26
13
22
26
3
-
25
31
15
21
5
-
21
26
11
16
1
6
11
1
72
67
62
57
37
32
27
32
7.3
7.0
6.7
6.4
-
-
-
-
-
-
-
-
-
-
-
-
-
-
30
25
22
26
7.6
7.3
6.9
6.7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
30
27
32
19
27
32
8
-
25
22
26
15
22
26
4
-
27
32
16
20
5
9
22
26
10
15
-
3
Temperature of Air on Condenser Coil 125°F
72
67
62
57
25
20
17
21
7.7
7.3
7.0
6.8
25
7
-
25
1
-
25
-
25
-
25
-
25
-
19
-
2250
2625
3000
3375
3750
These capacities are gross ratings. For net capacity,
deduct air blower motor, MBh = 3.415 x kW. Refer to the
appropriate Blower Performance Table for the kW of the
supply air blower motor.
-
-
-
-
-
* -
-
-
-
-
-
-
-
72
67
62
57
25
21
18
22
7.8
7.4
7.1
6.8
18
12
-
15
4
-
12
-
4
-
-
-
-
-
-
-
-
-
-
-
-
-
These ratings include the condenser fan motors (total 1
kW) and the compressor motors but not the supply air
blower motor.
-
-
† -
-
-
-
-
72
67
62
57
26
21
18
22
7.8
7.4
7.1
6.8
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
17
18
22
8
-
18
22
16
22
7
-
-
No sensible cooling capacity.
14
5
72
67
62
57
24
20
17
21
7.9
7.5
7.2
6.9
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
19
17
21
10
17
21
-
16
21
6
-
11
1
72
67
62
57
23
19
16
20
7.9
7.5
7.2
7.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
19
16
20
11
16
20
-
16
20
5
9
18
Unitary Products Group
246721-YTG-C-0606
TABLE 7: COOLING CAPACITY DR120 UNIT
Air On Evap. Coil
Temperature of Air on Condenser Coil 85°F
Temperature of Air on Condenser Coil 95°F
Total
Tot.
Sensible Capacity (MBH)
Return Dry Bulb (°F)
Total
Tot.
Sensible Capacity (MBH)
Return Dry Bulb (°F)
Cap.1
Input2
(kW)
Cap.1
Input2
(kW)
CFM
3000
WB (°F)
(MBH)
(MBH)
86
83
80
77
74
71
68
86
83
80
77
74
71
68
72
67
62
57
134
121
110
108
8.6
8.4
8.3
8.2
80
96
72
88
63
79
97
99
54
71
88
91
46
62
79
82
37
53
71
74
29
45
62
65
126
113
103
100
9.4
9.1
8.9
8.9
76
93
67
85
59
76
92
93
50
67
84
84
42
59
75
76
33
50
66
67
24
42
58
58
110
108
105
108
103
100
101
100
72
67
62
57
139
125
114
112
8.7
8.5
8.3
8.3
89
79
96
68
86
58
76
95
98
48
66
85
88
38
56
75
78
28
46
65
67
130
117
106
104
9.4
9.2
8.9
8.9
84
74
92
63
82
53
72
89
90
43
62
79
80
33
52
69
70
23
42
59
60
106
114
112
102
106
104
3500
4000
4500
5000
112
112
105
108
105
104
100
100
72
67
62
57
144
130
119
117
8.8
8.6
8.4
8.4
97
86
74
93
62
81
51
70
90
93
39
58
78
82
27
46
67
70
135
121
110
108
9.5
9.2
9.0
8.9
91
80
68
88
56
77
95
96
45
65
84
84
33
53
72
73
22
42
60
61
116
119
117
105
119
117
112
110
108
100
110
108
113
117
102
105
107
108
72
67
62
57
147
133
121
119
8.8
8.6
8.4
8.4
105
125
121
119
92
78
99
65
85
52
72
92
92
39
59
79
79
25
45
65
66
137
123
112
109
9.6
9.3
9.0
9.0
99
86
73
94
59
81
97
96
46
68
84
83
33
54
70
70
20
41
57
56
112
121
119
119
112
109
107
112
109
118
119
105
106
110
109
72
67
62
57
150
135
123
121
8.9
8.7
8.5
8.4
113
134
123
121
98
83
68
89
53
74
94
92
38
59
79
77
23
45
64
62
139
125
113
111
9.6
9.3
9.1
9.1
107
125
113
111
92
77
62
85
98
96
47
70
84
81
32
55
69
66
18
40
54
51
119
123
121
104
123
121
115
113
111
100
113
111
109
107
Temperature of Air on Condenser Coil 105°F
Temperature of Air on Condenser Coil 115°F
72
67
62
57
117
105
94
10.0
9.7
73
90
94
94
64
81
93
94
55
72
85
86
47
64
77
78
38
55
68
69
30
47
60
61
21
38
51
52
108
97
10.6
10.2
9.9
69
86
86
88
61
77
86
88
52
69
78
80
44
60
70
71
35
52
61
63
27
43
53
54
18
35
44
46
3000
3500
4000
4500
5000
9.4
86
94
9.4
88
10.0
72
67
62
57
121
109
97
10.1
9.7
80
98
97
97
70
88
97
97
60
78
92
93
50
68
82
83
40
58
72
73
30
48
62
63
19
38
52
53
111
100
88
10.7
10.3
10.0
10.1
77
94
88
90
67
85
88
90
56
74
85
86
46
64
74
76
36
54
64
66
26
44
54
56
16
34
44
46
9.5
97
9.5
90
72
67
62
57
124
112
100
100
10.1
9.8
88
76
96
64
84
53
72
87
89
41
61
76
77
29
49
64
65
18
37
52
54
114
103
91
10.8
10.4
10.1
10.1
84
103
91
72
92
91
93
61
80
91
93
49
68
79
81
37
57
67
69
26
45
56
58
14
33
44
46
107
100
100
9.5
100
100
99
9.5
100
93
93
72
67
62
57
126
114
102
102
10.2
9.9
95
82
69
90
55
76
88
88
42
63
74
75
29
50
61
62
16
37
48
48
115
104
92
10.9
10.5
10.1
10.2
91
104
92
78
98
92
94
65
85
92
94
51
72
79
81
38
59
65
67
25
45
52
54
12
32
39
41
111
102
102
103
102
102
9.6
101
102
9.6
94
94
72
67
62
57
128
115
103
103
10.3
9.9
103
115
103
103
88
73
95
58
80
88
88
43
65
73
73
28
51
58
58
13
36
44
43
117
105
93
10.9
10.5
10.2
10.3
98
105
93
84
105
93
69
91
93
95
54
76
78
80
39
61
63
65
24
46
48
50
9
110
103
103
31
33
35
9.7
103
103
9.7
95
95
95
Temperature of Air on Condenser Coil 125°F
72
67
62
57
99
89
78
82
11.2
10.8
10.4
10.6
66
82
78
82
58
74
78
82
49
65
71
74
41
57
63
65
32
48
54
57
23
40
46
48
15
31
37
40
3000
3500
4000
4500
5000
These capacities are gross ratings. For net capacity,
1-
deduct air blower motor, MBh = 3.415 x kW. Refer to the
appropriate Blower Performance Table for the kW of the
supply air blower motor.
72
67
62
57
102
91
11.3
10.9
10.5
10.6
73
90
79
83
63
81
79
83
53
70
77
80
43
60
67
69
33
50
57
59
23
40
47
49
13
30
37
39
These ratings include the condenser fan motors (total 1
kW) and the compressor motors but not the supply air
blower motor.
79
2-
83
72
67
62
57
104
94
11.4
11.0
10.6
10.7
80
94
81
85
68
87
81
85
57
76
81
85
45
64
71
74
33
52
59
62
22
41
48
50
10
29
36
39
81
-
-No sensible cooling capacity.
85
72
67
62
57
105
94
11.5
11.0
10.7
10.8
87
94
82
86
74
94
82
86
61
81
82
86
47
67
69
73
34
54
56
60
21
41
43
46
8
28
30
33
82
86
72
67
62
57
106
95
11.6
11.1
10.8
10.9
94
95
83
87
79
95
83
87
64
86
83
87
50
71
68
72
35
56
53
57
20
41
38
42
5
26
23
27
83
87
Unitary Products Group
19
246721-YTG-C-0606
TABLE 8: COOLING CAPACITY DR120 UNIT (ALTERNATE REHEAT MODE)
Air On Evap.
Temperature of Air on Condenser Coil 85°F
Temperature of Air on Condenser Coil 95°F
Coil
Total
Tot.
Sensible Capacity (MBH)
Return Dry Bulb (°F)
Total
Tot.
Sensible Capacity (MBH)
Return Dry Bulb (°F)
WB
(°F)
CFM
Cap.1
Input2
(kW)
Cap.1
Input2
(kW)
(MBH)
(MBH)
86
83
80
77
74
71
68
86
83
80
77
74
71
68
72
67
62
57
72
67
62
57
72
67
62
57
72
67
62
57
56
50
43
44
8.8
8.4
8.0
7.8
9
1
-
-
-
-
-
-
-
-
-
-
-
-
-
48
43
38
37
9.1
8.7
8.3
8.1
18
17
16
16
9
8
8
7
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
21
32
37
13
24
28
4
3000
3500
4000
4500
5000
15
20
6
-
-
11
2
-
56
50
43
44
8.8
8.4
8.0
7.8
8
-
-
-
-
-
-
-
-
-
-
-
49
44
39
38
9.1
8.7
8.3
8.1
10
23
28
28
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
27
38
40
17
33
36
7
-
13
24
23
3
24
32
14
22
4
-
16
19
6
9
12
1
56
51
43
44
8.8
8.4
8.0
7.8
6
-
-
-
-
-
-
-
-
-
-
51
45
40
39
9.1
8.7
8.3
8.1
3
-
-
-
-
-
-
-
-
-
-
-
-
-
33
43
44
21
43
44
10
34
44
-
-
30
40
39
18
40
39
6
-
22
32
10
21
-
33
39
21
28
9
9
16
58
52
45
45
8.8
8.4
8.0
7.8
1
-
-
-
-
-
-
-
-
-
-
52
47
41
41
9.2
8.7
8.3
8.2
-
-
-
-
-
-
-
-
-
-
-
41
45
45
27
45
45
14
40
45
1
-
37
41
41
24
41
41
11
38
41
-
-
27
32
14
19
-
24
27
11
14
-
6
1
72
67
62
57
60
54
46
47
8.8
8.4
8.0
7.9
-
-
-
-
-
-
-
-
-
-
-
54
48
43
42
9.2
8.8
8.4
8.2
-
-
-
-
-
-
-
-
-
-
-
-
-
48
46
47
33
46
47
18
46
47
4
-
45
43
42
30
43
42
15
43
42
-
-
31
32
17
17
2
2
28
27
13
12
Temperature of Air on Condenser Coil 105°F
Temperature of Air on Condenser Coil 115°F
72
67
62
57
72
67
62
57
72
67
62
57
72
67
62
57
41
36
31
31
9.5
9.0
8.6
8.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
33
29
24
25
9.9
9.4
9.0
8.9
-
-
-
-
-
-
-
-
-
-
-
-
-
-
12
20
21
4
-
8
-
-
-
3000
3500
4000
4500
5000
16
16
12
12
3
3
24
25
24
25
24
25
16
17
7
8
43
38
33
33
9.5
9.0
8.6
8.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
36
31
26
27
9.9
9.4
9.0
8.9
-
-
-
-
-
-
-
-
-
-
-
-
-
-
19
27
27
9
-
-
15
26
27
5
-
-
25
25
20
23
10
13
-
26
27
24
27
14
17
4
7
3
45
39
34
34
9.5
9.0
8.6
8.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
39
33
28
29
9.9
9.3
8.9
8.9
-
-
-
-
-
-
-
-
-
-
-
-
-
-
26
34
34
14
34
34
-
-
22
28
29
11
28
29
-
-
29
34
17
23
5
24
29
13
17
1
6
11
46
40
35
35
9.5
9.0
8.6
8.5
4
33
-
-
20
-
-
6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
40
34
29
30
9.9
9.4
9.0
8.9
17
29
-
11
16
-
5
2
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
72
67
62
57
47
42
36
36
9.6
9.1
8.7
8.6
11
40
3
-4
-19
-5
-34
-19
-80
-94
-
-
-
-
-
-
-
-
41
35
29
31
9.9
9.4
9.0
8.9
41
35
-
41
20
-
41
5
-
26
-
11
-
-
-
-
-
-
-
-
-
25
10
-35
-49
-42
-56
-50
-64
-65
-79
-
-
-
-
-
-
-
Temperature of Air on Condenser Coil 125°F
72
67
62
57
72
67
62
57
72
67
62
57
72
67
62
57
26
21
17
19
10.3
9.7
9.3
-
-
-
-
-
-
-
-
3
-
-
-
-
-
3000
3500
4000
4500
5000
These capacities are gross ratings. For net capacity,
1 -
17
19
17
19
17
19
17
19
17
19
11
12
2
4
deduct air blower motor, MBh = 3.415 x kW. Refer to the
appropriate Blower Performance Table for the kW of the
supply air blower motor.
9.3
29
24
19
22
10.2
9.7
9.3
-
-
-
-
-
-
-
-
-
-
-
-
11
19
22
1
-
-
These ratings include the condenser fan motors (total 1
kW) and the compressor motors but not the supply air
blower motor.
19
22
19
22
18
21
8
-
2 -
9.3
11
1
33
27
22
24
10.2
9.7
9.3
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
19
22
24
7
-
22
24
20
24
9
-
-
-No sensible cooling capacity.
9.2
12
1
33
28
22
25
10.2
9.7
9.3
9.3
29
24
-
27
11
-
25
-
12
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
72
67
62
57
34
28
23
25
10.3
9.7
9.3
34
28
34
15
-
34
1
-
34
-
34
-
-
-
-
-
-
-
-
-
-190
-
-
-
9.3
-
-
-
-
20
Unitary Products Group
246721-YTG-C-0606
TABLE 9: COOLING CAPACITY DR150 UNIT
Air On Evap. Coil
Temperature of Air on Condenser Coil 85°F
Temperature of Air on Condenser Coil 95°F
Total
Tot.
Sensible Capacity (MBH)
Return Dry Bulb (°F)
Total
Tot.
Sensible Capacity (MBH)
Return Dry Bulb (°F)
Cap.1
Input2
(kW)
Cap.1
Input2
(kW)
CFM
WB (°F)
(MBH)
(MBH)
86
83
80
77
74
71
68
86
83
80
77
74
71
68
72
67
62
57
174
160
147
143
10.9
10.7
10.5
10.7
98
87
77
66
94
55
83
45
72
94
95
34
62
84
84
168
153
141
136
11.9
11.7
11.4
11.6
97
86
75
65
90
54
80
43
69
92
88
32
58
81
78
126
147
143
115
137
138
104
127
127
122
141
136
112
134
131
101
124
120
3750
116
116
105
106
113
110
102
99
72
67
62
57
72
67
62
57
72
67
62
57
72
67
62
57
179
164
151
146
10.9
10.7
10.6
10.7
109
139
151
146
96
83
71
58
89
46
76
33
63
87
88
171
156
144
139
12.0
11.7
11.5
11.7
107
135
144
139
95
82
69
98
57
85
44
72
97
93
32
60
84
81
126
146
144
114
138
138
101
125
126
123
141
137
110
135
131
4375
5000
5625
6250
113
113
100
100
122
119
110
106
183
168
155
150
11.0
10.7
10.6
10.7
120
152
155
150
105
138
155
150
90
76
61
94
47
79
32
65
91
91
175
160
147
142
12.0
11.8
11.6
11.8
118
149
147
142
103
134
147
142
89
74
60
90
45
76
31
61
88
84
123
149
150
109
135
135
119
146
142
105
132
128
120
121
106
106
117
113
102
98
185
170
156
151
11.0
10.8
10.7
10.8
128
162
156
151
111
145
156
151
94
78
61
96
45
79
28
62
87
85
177
162
149
144
12.0
11.8
11.6
11.8
126
156
149
144
110
142
149
144
93
77
60
92
43
75
99
94
27
59
82
77
129
154
151
112
137
135
125
148
144
109
132
127
120
118
104
102
115
111
187
172
158
153
11.1
10.8
10.7
10.8
136
172
158
153
117
153
158
153
99
80
61
97
43
79
24
60
84
79
179
164
151
146
12.0
11.8
11.6
11.8
135
164
151
146
116
150
151
146
98
79
60
94
42
75
95
90
23
57
76
71
134
158
153
116
139
134
131
151
146
113
132
127
121
116
102
97
113
108
Temperature of Air on Condenser Coil 105°F
Temperature of Air on Condenser Coil 115°F
72
67
62
57
72
67
62
57
72
67
62
57
72
67
62
57
159
144
133
128
13.2
13.0
12.8
12.9
94
83
72
98
62
87
51
76
96
91
40
66
85
81
29
55
74
70
150
136
125
120
14.5
14.3
14.1
14.1
91
80
69
95
58
84
99
95
48
73
89
84
37
62
78
73
26
52
67
62
119
133
128
108
128
123
116
125
120
105
121
116
3750
4375
5000
5625
6250
117
113
106
102
110
105
162
147
136
131
13.2
13.1
12.8
12.9
104
132
136
131
91
79
66
94
54
81
41
69
90
85
28
56
77
72
152
138
128
122
14.5
14.4
14.1
14.2
101
128
128
122
88
75
63
91
50
78
95
90
38
65
82
77
25
53
70
64
119
133
128
107
128
123
116
126
120
103
120
115
115
110
102
98
108
102
165
150
139
133
13.3
13.1
12.9
13.0
114
145
139
133
100
130
139
133
85
71
56
86
42
72
94
90
27
57
80
75
155
141
130
124
14.6
14.4
14.2
14.2
111
141
130
124
96
82
67
97
53
83
38
68
86
81
23
53
72
66
116
138
133
101
124
119
126
130
124
112
130
124
109
104
116
110
101
95
167
152
140
135
13.3
13.1
12.9
13.0
123
149
140
135
106
138
140
135
90
73
57
89
40
72
90
85
23
55
74
69
157
143
132
126
14.6
14.4
14.2
14.2
120
143
132
126
103
135
132
126
87
70
53
85
99
93
37
68
82
76
20
52
65
60
122
140
135
105
123
118
118
132
126
102
115
109
107
102
72
67
62
57
169
154
142
137
13.3
13.1
12.9
13.0
132
154
142
137
113
147
142
137
94
76
57
91
39
72
86
81
20
53
68
62
159
144
133
128
14.5
14.4
14.2
14.2
128
144
133
128
110
143
133
128
91
73
54
87
96
90
35
69
78
72
17
50
59
53
128
142
137
109
123
118
125
133
128
106
115
109
105
99
Temperature of Air on Condenser Coil 125°F
72
67
62
57
72
67
62
57
72
67
62
57
72
67
62
57
141
127
118
112
15.7
15.6
15.4
15.4
88
77
66
91
55
81
93
87
45
70
82
76
34
59
71
66
23
49
61
55
113
118
112
102
114
108
3750
4375
5000
5625
6250
These capacities are gross ratings. For net capacity,
1-
103
98
deduct air blower motor, MBh = 3.415 x kW. Refer to the
appropriate Blower Performance Table for the kW of the
supply air blower motor.
143
129
120
114
15.8
15.7
15.4
15.4
97
85
72
60
87
47
74
88
81
34
62
75
69
22
49
62
56
125
120
114
112
118
112
100
113
107
These ratings include the condenser fan motors (total 1
kW) and the compressor motors but not the supply air
blower motor.
100
94
2-
145
132
122
116
15.8
15.7
15.5
15.4
107
132
122
116
93
78
64
93
49
79
93
86
34
64
79
72
20
50
64
57
123
122
116
108
122
116
108
101
-
-No sensible cooling capacity.
147
133
123
117
15.8
15.7
15.5
15.4
116
133
123
117
100
131
123
117
83
67
98
50
81
90
84
33
65
74
67
17
48
57
51
115
123
117
107
100
72
67
62
57
149
135
125
118
15.8
15.7
15.5
15.4
125
135
125
118
107
135
125
118
88
69
51
84
88
81
32
66
69
63
13
47
50
44
121
125
118
103
106
100
Unitary Products Group
21
246721-YTG-C-0606
TABLE 10: COOLING CAPACITY DR150 UNIT (ALTERNATE REHEAT MODE)
Air On Evap. Coil
Temperature of Air on Condenser Coil 85°F
Temperature of Air on Condenser Coil 95°F
Total
Tot.
Sensible Capacity (MBH)
Return Dry Bulb (°F)
Total
Tot.
Sensible Capacity (MBH)
Return Dry Bulb (°F)
Cap.1
Input2
(kW)
Cap.1
Input2
(kW)
CFM
WB (°F)
(MBH)
(MBH)
86
83
80
77
74
71
68
86
83
80
77
74
71
68
72
67
62
57
70
63
57
52
10.7
10.2
9.7
14
28
42
43
4
-
-
-
-
-
-
-
-
-
-
-
-
-
-
67
60
53
49
10.8
10.3
9.9
11
27
44
47
-
-
-
-
-
-
-
-
-
-
-
-
-
17
31
33
6
-
17
34
36
6
-
3750
21
22
10
11
23
25
12
15
1
4
9.8
10.1
72
67
62
57
72
67
62
57
72
67
62
57
72
67
62
57
74
66
60
55
10.5
10.0
9.5
11
38
52
50
-
-
-
-
-
-
-
-
-
-
70
61
54
51
10.8
10.3
10.0
10.1
7
-
-
-
-
-
-
-
-
-
-
25
47
45
13
41
44
-
-
35
50
49
23
45
44
10
39
44
-
-
4375
5000
5625
6250
29
31
16
19
4
6
27
31
14
18
1
6
9.6
77
69
62
58
10.3
9.8
9.3
9.4
8
-
-
-
-
-
-
-
72
63
56
52
10.8
10.3
10.0
10.1
4
-
-
-
-
-
-
-
-
-
48
62
58
33
62
58
19
62
66
4
-
-
43
56
52
29
56
52
14
56
62
-
-
-
48
52
33
37
19
22
4
8
41
47
27
33
12
18
78
70
63
58
10.4
9.9
9.5
9.6
8
-
-
-
-
-
-
-
-
-
73
65
57
53
10.8
10.3
10.0
10.1
-
-
-
-
-
-
-
-
-
-
-
55
63
58
39
63
58
22
63
63
5
-
-
52
57
53
36
57
53
19
57
58
2
-
46
46
30
29
13
13
41
42
24
25
7
8
79
71
64
59
10.6
10.1
9.6
8
-
-
-
-
-
-
-
-
-
-
75
66
59
54
10.8
10.3
10.0
10.2
-
-
-
-
-
-
-
-
-
-
-
62
64
59
44
64
59
25
64
59
7
-
61
59
54
42
59
54
24
59
54
5
-
45
40
27
22
8
3
40
36
21
17
3
-
9.7
Temperature of Air on Condenser Coil 105°F
Temperature of Air on Condenser Coil 115°F
72
67
62
57
72
67
62
57
72
67
62
57
72
67
62
57
64
54
50
46
11.8
11.4
11.1
11.2
35
23
5
28
12
-
17
2
-
7
-
-
-
-
-
-
-
-
-
-
-
-
-
60
49
48
43
12.7
12.6
12.3
12.4
60
19
-
56
8
-
45
-
34
-
24
-
13
-
2
-
3750
4375
5000
5625
6250
-
-
-
-
-
-
3
-
-
-
-
-
-
-
-
-
-
64
54
50
46
11.8
11.4
11.1
11.2
17
30
28
24
6
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
58
47
46
42
12.7
12.5
12.3
12.3
27
25
5
17
12
-
5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
18
22
19
5
17
19
4
6
-
-
-
-
64
54
50
46
11.8
11.4
11.1
11.2
-
-
-
-
-
-
-
-
-
-
-
55
45
44
40
12.7
12.5
12.3
12.3
-
-
-
-
-
-
-
-
-
-
-
37
50
46
23
50
46
8
-
-
31
44
40
17
44
40
2
-
-
50
56
35
41
21
27
6
44
50
30
36
15
21
-
12
6
66
56
52
48
11.8
11.4
11.1
11.2
-
-
-
-
-
-
-
-
-
-
-
59
48
48
43
12.7
12.5
12.3
12.3
-
-
-
-
-
-
-
-
-
-
-
-
-
47
52
48
30
52
48
13
52
53
-
-
41
48
43
25
48
43
8
-
-
36
37
19
20
3
3
48
48
31
31
14
15
72
67
62
57
69
59
55
50
11.8
11.4
11.1
11.3
-
-
-
-
-
-
-
-
-
-
-
-
-
64
51
51
46
12.7
12.5
12.3
12.4
-
-
-
-
-
-
-
-
-
-
-
-
-
-
56
55
50
37
55
50
19
55
50
-
-
51
51
46
32
51
46
14
51
46
-
36
32
17
13
32
27
14
9
Temperature of Air on Condenser Coil 125°F
72
67
62
57
72
67
62
57
72
67
62
57
72
67
62
57
56
43
46
41
13.7
13.7
13.5
13.5
56
15
-
56
4
-
56
-
56
-
51
-
41
-
30
-
3750
4375
5000
5625
6250
These capacities are gross ratings. For net capacity, deduct
air blower motor, MBh = 3.415 x kW. Refer to the appropriate
Blower Performance Table for the kW of the supply air blower
motor.
-
-
-
-
-
1 -
-
-
-
-
-
-
-
52
39
42
37
13.7
13.6
13.5
13.5
36
20
-
28
7
-
16
-
3
-
-
-
-
-
-
-
-
-
-
-
-
-
These ratings include the condenser fan motors (total 1 kW)
and the compressor motors but not the supply air blower
motor.
-
-
2 -
-
-
-
-
47
35
38
34
13.6
13.6
13.4
13.4
-
-
-
-
-
-
-
-
-
-
-
-
-
-
25
38
34
10
38
34
-
-
38
34
24
30
9
-
-No sensible cooling capacity.
15
53
40
43
38
13.6
13.6
13.4
13.4
-
-
-
-
-
-
-
-
-
-
-
-
-
-
36
43
38
19
43
38
2
-
43
38
26
26
9
10
72
67
62
57
58
44
47
42
13.6
13.6
13.4
13.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-
44
47
42
28
47
42
-
-
47
42
28
23
10
5
22
Unitary Products Group
246721-YTG-C-0606
DR090 Moisture Removal @ 3000 cfm
Alternate Mode @ various
indoor (dry bulb / wet bulb) conditions
70
60
50
40
30
20
10
0
65
75
85
95
105
Outdoor Temperature (°F)
75db/71wb
85db/71wb
80db/71wb
80db/67wb
75db/67wb
85db/67wb
FIGURE 6 - DR090 MOISTURE REMOVAL - ALTERNATE MODE
DR090 Moisture Removal @ 3000 cfm
Normal Mode @ various
indoor (dry bulb / wet bulb) conditions
30
25
20
15
10
5
65
75
85
95
105
Outdoor Temperature (°F)
75db/71wb
85db/71wb
80db/71wb
80db/67wb
75db/67wb
85db/67wb
FIGURE 7 - DR090 MOISTURE REMOVAL - NORMAL MODE
Unitary Products Group
23
246721-YTG-C-0606
DR120 Moisture Removal @ 4000 cfm
Alternate Mode @ various
indoor (dry bulb / wet bulb) conditions
90
80
70
60
50
40
30
20
10
0
65
75
85
95
105
Outdoor Temperature (°F)
75db/71wb
85db/71wb
80db/71wb
80db/67wb
75db/67wb
85db/67wb
FIGURE 8 - DR120 MOISTURE REMOVAL - ALTERNATE MODE
DR120 Moisture Removal @ 4000 cfm
Normal Mode @ various
indoor (dry bulb / wet bulb) conditions
40
35
30
25
20
15
10
5
65
75
85
95
105
Outdoor Temperature (°F)
75db/71wb
85db/71wb
80db/71wb
80db/67wb
75db/67wb
85db/67wb
FIGURE 9 - DR120 MOISTURE REMOVAL - NORMAL MODE
24
Unitary Products Group
246721-YTG-C-0606
DR150 Moisture Removal @ 5000cfm
Alternate Mode @ various
indoor (dry bulb / wet bulb) conditions
100
90
80
70
60
50
40
30
20
10
0
65
75
85
95
105
Outdoor Temperature
75db/71wb
85db/71wb
80db/71wb
80db/67wb
75db/67wb
85db/67wb
FIGURE 10 - DR150 MOISTURE REMOVAL - ALTERNATE MODE
DR150 Moisture Removal @ 5000cfm
Normal Mode @ various
indoor (dry bulb / wet bulb) conditions
50
40
30
20
10
0
65
75
85
95
105
Outdoor Temperature (°F)
75db/71wb
75db/67wb
85db/71wb
80db/67wb
80db/71wb
85db/67wb
FIGURE 11 - DR150 MOISTURE REMOVAL - NORMAL MODE
Unitary Products Group
25
246721-YTG-C-0606
TABLE 11: ELECTRICAL DATA DR090 W/O PWRD CONVENIENCE OUTLET
Pwr
Conv
Outlet
Min. Circuit
Ampacity
(Amps)
Max Fuse* Size
w/Power
Exhaust (Amps)
OD Fan
Motors
Supply Blower
Motor FLA
Pwr Exh
Motor
MCA w/Power Max Fuse* Size
Exhaust (Amps) (Amps)
Compressors
Electric Heater
Model No.
Actual
KW
Heater
Amps
Voltage
RLA
ea.
LRA
ea.
FLA
ea.
1.5
HP
2
1.5
HP
2
1.5
HP
2
1.5
2
HP
50
50
60
80
100
50
50
70
90
125
25
25
35
45
60
20
20
30
35
50
1.5
HP
50
50
70
80
110
50
50
70
90
125
25
25
35
45
60
20
20
30
35
50
2
HP
50
50
70
80
110
50
50
80
90
125
25
25
35
45
60
20
20
30
40
50
FLA
FLA
HP
HP
HP
HP
50
50
60
80
100
50
50
70
80
110
25
25
35
40
60
20
20
25
35
45
None
--
6.8
13.5
18.0
25.5
--
--
38.7
38.7
54.6
70.2
96.2
38.7
38.7
61.9
79.9
110.0
19.8
19.8
30.9
40
40.7
40.7
57.1
72.7
98.7
40.7
40.7
64.4
82.4
112.5
20.8
20.8
32.2
41.2
56.2
16.3
16.3
26.2
33.4
45.4
44.2
44.2
61.5
77.1
103.1
44.2
44.2
68.8
86.8
116.9
22
46.2
46.2
64.0
79.6
105.6
46.2
46.2
71.3
89.3
119.4
23
2TP04520925
2TP04521825
2TP04522425
2TP04523625
None
18.9
37.5
50.0
70.8
--
208
230
460
13.1
13.1
6.7
110.0
110.0
54.0
1.5
1.5
0.8
0.6
6.2
6.2
3.1
2.4
8.2
8.2
4.1
3.6
5.5
0.0
2TP04520925
2TP04521825
2TP04522425
2TP04523625
None
9.0
18.0
24.0
34.0
--
21.7
43.3
57.7
81.8
--
5.5
2.2
1.8
0.0
0.0
0.0
2TP04520946
2TP04521846
2TP04522446
2TP04523646
None
9
11.3
22.6
30.1
42.7
--
22
23
18
33.7
42.7
57.7
16.9
16.9
26.9
34.1
46.1
34.9
44
24
34
55
59
--
15.1
15.1
24.7
31.9
43.9
18.1
18.1
28.4
35.6
47.6
2TP04520958
2TP04521858
2TP04522458
2TP04523658
9
9.0
575
5.1
44.0
18
18.1
24.1
34.1
24
34
*
Maximum HACR breaker of the same AMP size is applicable.
TABLE 12: ELECTRICAL DATA DR090 WITH PWRD CONVENIENCE OUTLET
Pwr
Conv
Outlet
Min. Circuit
Ampacity
(Amps)
Max Fuse Size
w/Power
Exhaust (Amps)
OD Fan
Motors
Supply Blower
Motor FLA
Pwr Exh
Motor
MCA w/Power Max Fuse* Size
Exhaust (Amps) (Amps)
Compressors
Electric Heater
Model No.
Actual
KW
Heater
Amps
Voltage
RLA
ea.
LRA
ea.
FLA
ea.
1.5
HP
2
1.5
HP
2
1.5
HP
2
1.5
2
HP
60
60
70
90
125
60
60
80
100
125
30
30
40
50
70
25
25
35
40
60
1.5
HP
60
2
HP
60
FLA
FLA
HP
HP
HP
HP
60
60
70
90
110
60
60
80
100
125
30
30
40
50
70
20
20
30
40
50
None
--
6.8
13.5
18.0
25.5
--
--
48.7
48.7
67.1
82.7
108.7
48.7
48.7
74.4
92.4
122.5
24.8
24.8
37.2
46.2
61.2
19.1
19.1
29.7
36.9
48.9
50.7
50.7
69.6
85.2
111.2
50.7
50.7
76.9
94.9
125.0
25.8
25.8
38.4
47.5
62.5
20.3
20.3
31.2
38.4
50.4
54.2
54.2
74.0
89.6
115.6
54.2
54.2
81.3
99.3
129.4
27
56.2
56.2
76.5
92.1
118.1
56.2
56.7
83.8
101.8
131.9
28
2TP04520925
2TP04521825
2TP04522425
2TP04523625
None
18.9
37.5
50.0
70.8
--
60
60
208
230
460
13.1
13.1
6.7
110.0
110.0
54.0
1.5
1.5
0.8
0.6
6.2
6.2
3.1
2.4
8.2
8.2
4.1
3.6
5.5
10.0
80
80
90
100
125
60
125
60
2TP04520925
2TP04521825
2TP04522425
2TP04523625
None
9.0
18.0
24.0
34.0
--
21.7
43.3
57.7
81.8
--
60
60
5.5
2.2
1.8
10.0
90
90
100
150
30
110
150
30
2TP04520946
2TP04521846
2TP04522446
2TP04523646
None
9
11.3
22.6
30.1
42.7
--
27
28
30
30
5.0
18
39.9
49
41.2
50.2
65.2
22.1
22.6
33.4
40.6
52.6
40
45
24
50
60
34
64
70
70
--
20.9
21.1
31.9
39.1
51.1
25
25
2TP04520958
2TP04521858
2TP04522458
2TP04523658
9
9.0
25
25
575
5.1
44.0
4.0
18
18.1
24.1
34.1
35
35
24
40
45
34
60
60
*
Maximum HACR breaker of the same AMP size is applicable.
26
Unitary Products Group
246721-YTG-C-0606
TABLE 13: ELECTRICAL DATA DR120 W/O PWRD CONVENIENCE OUTLET
Pwr
Conv
Outlet
Min. Circuit
Ampacity
(Amps)
Max Fuse Size
w/Power
Exhaust (Amps)
OD Fan
Motors
Supply Blower
Motor FLA
Pwr Exh
Motor
MCA w/Power Max Fuse* Size
Exhaust (Amps) (Amps)
Compressors
Electric Heater
Model No.
Actual
KW
Heater
Amps
Voltage
RLA
ea.
LRA
ea.
FLA
ea.
2
3
2
3
2
3
2
3
2
3
FLA
FLA
HP
HP
HP
HP
HP
HP
HP
60
HP
60
HP
70
HP
70
None
--
--
51.2
57.1
72.7
98.7
151.1
53.9
60.5
76.1
102.1
154.5
56.7
64.0
79.6
105.6
158.0
59.4
67.3
83.0
109.0
161.4
2TP04521825
2TP04522425
2TP04523625
2TP04525425
13.5
18.0
25.5
40.6
37.5
50.0
70.8
112.7
60
70
70
70
16.0
16.0
8.3
137.0
137.0
69.0
3.5
3.5
1.6
1.3
8.2
8.2
4.1
3.6
10.9
10.9
5.3
5.5
0.0
208
230
460
80
80
80
90
100
175
110
175
110
175
110
175
None
--
--
51.2
64.4
53.9
67.8
56.7
71.3
59.4
74.6
60
70
60
70
70
80
70
80
2TP04521825
2TP04522425
2TP04523625
2TP04525425
18.0
24.0
34.0
54.0
43.3
57.7
81.8
129.9
5.5
2.2
1.8
0.0
0.0
0.0
82.4
85.8
89.3
92.7
90
90
90
100
125
175
112.5
140.2
115.9
143.5
119.4
147.0
122.7
150.4
125
150
125
175
125
175
None
--
--
26
27.2
33.7
42.7
57.7
71.6
28.2
34.9
44
29.4
36.4
45.5
60.5
74.3
30
35
45
60
80
35
35
45
60
80
35
35
45
60
80
35
40
50
70
80
2TP04521846
2TP04522446
2TP04523646
2TP04525446
18
24
34
54
22.6
30.1
42.7
67.8
32.2
41.2
56.2
70.1
59
72.8
None
--
--
20.6
26.2
33.4
45.4
56.5
21.1
26.8
34
22.4
28.4
35.6
47.6
58.7
22.9
29
25
30
35
50
70
25
30
35
50
70
25
30
40
50
70
25
30
40
50
70
2TP04521858
2TP04522458
2TP04523658
2TP04525458
18
24
34
54
18.1
24.1
34.1
54.2
6.4
58.0
4.1
575
36.2
48.3
59.3
46
57.1
*
Maximum HACR breaker of the same AMP size is applicable.
TABLE 14: ELECTRICAL DATA DR120 WITH PWRD CONVENIENCE OUTLET
Pwr
Conv
Outlet
Min. Circuit
Ampacity
(Amps)
Max Fuse Size
w/Power
Exhaust (Amps)
OD Fan
Motors
Supply Blower
Motor FLA
Pwr Exh
Motor
MCA w/Power Max Fuse* Size
Exhaust (Amps) (Amps)
Compressors
Electric Heater
Model No.
Actual
KW
Heater
Amps
Voltage
RLA
ea.
LRA
ea.
FLA
ea.
2
3
2
3
2
3
2
3
2
3
FLA
FLA
HP
HP
HP
HP
HP
HP
HP
70
HP
70
HP
80
HP
80
None
--
--
61.2
69.6
85.2
111.2
163.6
63.9
73.0
88.6
114.6
167.0
66.7
76.5
92.1
118.1
170.5
69.4
79.8
95.5
121.5
173.9
2TP04521825
2TP04522425
2TP04523625
2TP04525425
13.5
18.0
25.5
40.6
37.5
50.0
70.8
112.7
70
80
80
80
16.0
16.0
8.3
137.0
137.0
69.0
3.5
3.5
1.6
1.3
8.2
8.2
4.1
3.6
10.9
10.9
5.3
5.5
10.0
208
230
460
90
90
100
125
175
100
125
175
125
175
125
175
None
--
--
61.2
76.9
63.9
80.3
66.7
83.8
69.4
87.1
70
80
70
90
80
90
80
90
2TP04521825
2TP04522425
2TP04523625
2TP04525425
18.0
24.0
34.0
54.0
43.3
57.7
81.8
129.9
5.5
2.2
1.8
10.0
94.9
98.3
101.8
131.9
159.5
105.2
135.2
162.9
100
125
175
100
150
175
110
150
175
110
150
175
125.0
152.7
128.4
156.0
None
--
--
31
32.2
39.9
49
33.2
41.2
50.2
65.2
79.1
34.4
42.7
51.7
66.7
80.6
35
40
50
70
90
40
40
50
70
90
40
45
60
70
90
40
45
60
70
90
2TP04521846
2TP04522446
2TP04523646
2TP04525446
18
24
34
54
22.6
30.1
42.7
67.8
38.4
47.5
62.5
76.3
5.0
64
77.8
None
--
--
24.6
31.2
38.4
50.4
61.5
25.1
31.8
39
26.4
33.4
40.6
52.6
63.7
26.9
34
30
35
40
60
70
30
35
40
60
70
30
35
45
60
70
30
35
45
60
70
2TP04521858
2TP04522458
2TP04523658
2TP04525458
18
24
34
54
18.1
24.1
34.1
54.2
6.4
58.0
4.1
4.0
575
41.2
53.3
64.3
51
62.1
*
Maximum HACR breaker of the same AMP size is applicable.
Unitary Products Group
27
246721-YTG-C-0606
TABLE 15: ELECTRICAL DATA DR150 W/O PWRD CONVENIENCE OUTLET
Max Fuse Size
Pwr
Conv
Outlet
Min. Circuit
Ampacity
(Amps)
MCA w/Power
Exhaust
(Amps)
OD Fan
Motors
Supply Blower Pwr Exh
Max Fuse* Size
(Amps)
w/Power
Exhaust
(Amps)
Compressors
Motor FLA
Motor
Electric Heater
Model No.
Actual
KW
Heater
Amps
Voltage
RLA
ea.
LRA
ea.
FLA
ea.
3
5
3
5
3
5
3
5
3
5
FLA
FLA
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
None
--
--
61.9
61.9
67.1
67.1
67.4
67.4
72.6
73.8
80
80
80
80
80
80
90
90
2TP04521825
2TP04522425
2TP04523625
2TP04525425
13.5
18.0
25.5
40.6
37.5
50.0
70.8
112.7
20.0
20.0
8.4
146.0
146.0
73.0
1.5
1.5
0.8
0.6
10.9
10.9
5.3
16.1
16.1
8.1
5.5
5.5
2.2
1.8
0.0
208
230
460
76.1
82.6
83.0
89.5
80
90
90
90
102.1
154.5
108.6
161.0
109.0
161.4
115.5
167.9
110
175
110
175
110
175
125
175
None
--
--
61.9
67.8
67.1
74.3
67.4
74.6
72.6
81.1
80
80
80
80
80
80
90
90
2TP04521825
2TP04522425
2TP04523625
2TP04525425
18.0
24.0
34.0
54.0
43.3
57.7
81.8
129.9
0.0
0.0
0.0
85.8
92.3
92.7
99.2
90
100
125
175
100
125
175
100
150
175
115.9
143.5
122.4
150.0
122.7
150.4
129.2
156.9
125
175
None
--
--
27.4
33.7
42.7
57.7
71.6
30.2
37.2
46.2
61.2
75.1
29.6
36.4
45.5
60.5
74.3
32.4
39.9
49
35
35
45
60
80
35
40
50
70
90
35
40
50
70
80
40
40
50
70
90
2TP04521846
2TP04522446
2TP04523646
2TP04525446
18
24
34
54
22.6
30.1
42.7
67.8
64
77.8
None
--
--
22.5
26.8
34
24.4
29.2
36.4
48.4
59.5
24.3
29
26.2
31.4
38.6
50.6
61.7
25
30
35
50
70
30
30
40
50
70
30
30
40
50
70
30
35
40
60
70
2TP04521858
2TP04522458
2TP04523658
2TP04525458
18
24
34
54
18.1
24.1
34.1
54.2
7.1
60.0
4.1
6.0
575
36.2
48.3
59.3
46
57.1
*
Maximum HACR breaker of the same AMP size is applicable.
TABLE 16: ELECTRICAL DATA DR150 W/PWRD CONVENIENCE OUTLET
Max Fuse Size
w/Power
Exhaust
Pwr
Conv
Outlet
Min. Circuit
Ampacity
(Amps)
MCA w/Power
Exhaust
(Amps)
OD Fan
Motors
Supply Blower Pwr Exh
Max Fuse* Size
(Amps)
Compressors
Motor FLA
Motor
Electric Heater
Model No.
Actual
KW
Heater
Amps
Voltage
(Amps)
RLA
ea.
LRA
ea.
FLA
ea.
3
5
3
5
3
5
3
5
3
5
FLA
FLA
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
None
--
--
71.9
73.0
77.1
79.5
77.4
79.8
82.6
86.3
90
90
90
90
90
90
100
100
110
150
200
2TP04521825
2TP04522425
2TP04523625
2TP04525425
13.5
18.0
25.5
40.6
37.5
50.0
70.8
112.7
20.0
20.0
8.4
146.0
146.0
73.0
1.5
1.5
0.8
0.6
10.9
10.9
5.3
16.1
16.1
8.1
5.5
5.5
2.2
1.8
10.0
208
230
460
88.6
95.1
95.5
102.0
128.0
180.4
90
100
125
175
100
125
175
114.6
167.0
121.1
173.5
121.5
173.9
125
175
None
--
--
71.9
80.3
77.1
86.8
77.4
87.1
82.6
93.6
90
90
90
90
90
90
100
100
125
150
175
2TP04521825
2TP04522425
2TP04523625
2TP04525425
18.0
24.0
34.0
54.0
43.3
57.7
81.8
129.9
10.0
98.3
104.8
134.9
162.5
105.2
135.2
162.9
111.7
141.7
169.4
100
150
175
110
150
175
110
150
175
128.4
156.0
None
--
--
32.4
39.9
49
35.2
43.4
52.5
67.5
81.3
34.6
42.7
51.7
66.7
80.6
37.4
46.2
55.2
70.2
84.1
40
40
50
70
90
40
45
60
70
90
40
45
60
70
90
45
50
60
80
90
2TP04521846
2TP04522446
2TP04523646
2TP04525446
18
24
34
54
22.6
30.1
42.7
67.8
5.0
64
77.8
None
--
--
26.5
31.8
39
28.4
34.2
41.4
53.4
64.5
28.3
34
30.2
36.4
43.6
55.6
66.7
30
35
40
60
70
35
35
45
60
70
35
35
45
60
70
35
40
45
60
70
2TP04521858
2TP04522458
2TP04523658
2TP04525458
18
24
34
54
18.1
24.1
34.1
54.2
7.1
60.0
4.1
6.0
4.0
575
41.2
53.3
64.3
51
62.1
*
Maximum HACR breaker of the same AMP size is applicable.
NOTE: Electric heaters are rated at nominal voltage. Use
this table to determine the electric heat capacity for
heaters supplied at lower voltages.
TABLE 17: ELECTRIC HEAT MULTIPLIERS
VOLTAGE
kW Cap. Multiplier
NOMINAL
RATING
208
0.75
0.92
0.92
0.92
240
230
480
600
460
575
28
Unitary Products Group
246721-YTG-C-0606
TABLE 18: BLOWER PERFORMANCE DR090 SIDEFLOW
DR090 Standard Drive Assembly (Side Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.2 ---- ----
0.3 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- 3342 725 1038 1.11 3048 711 912 0.98
---- ---- 3609 775 1283 1.38 3350 748 1125 1.21 3085 727 984 1.06 2791 713 858 0.92
0.4 3885 848 1585 1.70 3629 809 1395 1.50 3319 776 1222 1.31 3098 750 1064 1.14 2833 729 923 0.99 2539 714 797 0.86
0.5 3647 849 1517 1.63 3391 810 1328 1.42 3081 777 1155 1.24 2846 751 997 1.07 2580 730 856 0.92 2286 715 730 0.78
0.6 3439 850 1444 1.55 3182 811 1254 1.35 2872 779 1081 1.16 2586 752 923 0.99 2320 731 782 0.84 2026 717 656 0.70
0.7 3235 852 1363 1.46 2979 813 1174 1.26 2669 780 1000 1.07 2312 753 843 0.90 2047 733 701 0.75 ---- ----
---- ----
---- ----
---- ----
---- ----
0.8 3012 853 1276 1.37 2756 815 1087 1.17 2446 782 913 0.98 2019 755 756 0.81 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
0.9 2748 856 1182 1.27 2492 817 993 1.06 ---- ----
2417 859 1081 1.16 ---- ---- ---- ---- ---- ----
0 Turns Open 1 Turn Open
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR090 Optional Drive Assembly (Side Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.3 ---- ----
0.4 ---- ----
0.5 ---- ----
0.6 ---- ----
0.7 ---- ----
0.8 ---- ----
0.9 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- 4437 866 1859 1.99 4062 825 1599 1.72
---- ---- 4572 907 2074 2.23 4209 867 1783 1.91 3834 826 1522 1.63
---- ---- 4356 909 1992 2.14 3993 869 1701 1.82 3618 827 1440 1.54
---- ---- 4149 910 1905 2.04 3786 871 1613 1.73 3411 829 1353 1.45
---- ---- 4286 951 2134 2.29 3945 913 1812 1.94 3582 873 1520 1.63 3207 831 1260 1.35
---- ---- 4123 954 2036 2.18 3740 915 1713 1.84 3377 875 1422 1.53 3002 834 1161 1.25
---- ---- 3962 957 1932 2.07 3529 918 1609 1.73 3166 878 1318 1.41 2791 837 1057 1.13
1
---- ----
---- ---- 4115 997 2176 2.33 3798 960 1822 1.96 3307 921 1500 1.61 2944 881 1208 1.30 ---- ----
---- ---- 3945 1000 2061 2.21 3629 963 1707 1.83 3070 925 1384 1.49 2706 885 1093 1.17 ---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
1.1 ---- ----
1.2 ---- ----
---- ---- 3766 1004 1940 2.08 3450 967 1587 1.70 2812 928 1264 1.36 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1.3 3822 1043 2199 2.36 3573 1007 1814 1.95 3257 970 1460 1.57 ---- ----
---- ---- ---- ----
---- ---- ---- ----
1.4 3611 1047 2067 2.22 3362 1011 1682 1.80 ---- ----
0 Turns Open 1 Turn Open
---- ---- ---- ----
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR 090 Standard Drive Assembly (Side Flow)
DR 090 Optional Drive Assembly (Side Flow)
4750
4500
4250
4000
3750
3500
3250
3000
2750
4000
0 Turns
1 Turn
3 Turns
3750
3500
3250
3000
2750
2500
2250
2000
4 Turns
2 Turns
3 Turns
4 Turns
5 Turns
2 Turns
1 Turn
5 Turns
0 Turns
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1
External Static Pressure (iwg)
External Static Pressure (iwg)
Unitary Products Group
29
246721-YTG-C-0606
TABLE 19: BLOWER PERFORMANCE DR090 SIDEFLOW ECONOMIZER
DR090 Standard Drive Assembly (Side Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.3 3886 846 1588 1.70 3655 807 1408 1.51 3388 774 1242 1.33 3252 747 1090 1.17 2979 726 952 1.02 2670 712 828 0.89
0.4 3709 847 1530 1.64 3478 808 1350 1.45 3211 775 1184 1.27 3027 748 1032 1.11 2754 727 894 0.96 2445 713 769 0.83
0.5 3517 848 1468 1.57 3286 809 1288 1.38 3019 776 1122 1.20 2782 749 970 1.04 2509 729 832 0.89 2199 714 707 0.76
0.6 3310 849 1401 1.50 3079 810 1221 1.31 2811 777 1055 1.13 2518 751 903 0.97 2245 730 765 0.82 1936 715 641 0.69
0.7 3088 851 1329 1.43 2857 812 1149 1.23 2590 779 983 1.05 2237 752 831 0.89 1964 731 693 0.74
0.8 2853 853 1250 1.34 2622 814 1070 1.15 2354 781 904 0.97 1940 754 752 0.81
0.9 2605 855 1164 1.25 2373 816 984 1.06 2106 783 818 0.88
1
2343 858 1070 1.15 2112 819 890 0.95
0 Turns Open 1 Turn Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR090 Optional Drive Assembly (Side Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.3 ---- ----
0.4 ---- ----
0.5 ---- ----
0.6 ---- ----
0.7 ---- ----
0.8 ---- ----
0.9 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- 4651 913 2124 2.28 4331 871 1846 1.98 3990 828 1595 1.71
---- ---- 4434 912 2037 2.18 4114 871 1759 1.89 3772 828 1508 1.62
---- ---- 4232 913 1948 2.09 3912 871 1670 1.79 3571 828 1419 1.52
---- ---- 4319 954 2161 2.32 4040 914 1857 1.99 3720 873 1580 1.69 3379 829 1328 1.42
---- ---- 4159 955 2068 2.22 3852 916 1764 1.89 3532 874 1486 1.59 3190 831 1235 1.32
---- ---- 3996 958 1972 2.12 3660 918 1668 1.79 3340 876 1391 1.49 2999 833 1139 1.22
---- ---- 4137 998 2202 2.36 3825 960 1873 2.01 3459 920 1569 1.68 3139 879 1291 1.39 2797 835 1040 1.12
1
---- ----
---- ---- 3949 1000 2100 2.25 3637 962 1770 1.90 3242 923 1466 1.57 2922 881 1189 1.28 ---- ----
---- ----
---- ----
---- ----
1.1 ---- ----
1.2 ---- ----
---- ---- 3738 1003 1993 2.14 3427 965 1663 1.78 3002 925 1360 1.46 ---- ----
---- ---- 3498 1005 1882 2.02 3186 967 1553 1.67 ---- ---- ---- ---- ---- ----
1 Turn Open 2 Turns Open 3 Turns Open
---- ---- ---- ----
---- ---- ---- ----
0 Turns Open
4 Turns Open
5 Turns Open
DR 090 Optional Drive Assembly (Side Flow)
(100%Return Economizer)
DR 090 Standard Drive Assembly (Side Flow)
(100%Return Economizer)
4750
4000
3 Turns
0 Turns
1 Turn
4500
4250
4000
3750
3500
3250
3000
2750
3750
3500
3250
3000
2750
2500
2250
2000
2 Turns
4 Turns
5 Turns
1 Turn
2 Turns
3 Turns
4 Turns
5 Turns
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1
1.1
External Static Pressure (iwg)
External Static Pressure (iwg)
30
Unitary Products Group
246721-YTG-C-0606
TABLE 20: BLOWER PERFORMANCE DR090 DOWNFLOW
DR090 Standard Drive Assembly (Down Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.2 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 3066 728 1044 1.12 2975 711 993 1.07
0.3 3619 853 1468 1.57 3328 814 1303 1.40 3071 781 1166 1.25 2922 752 1058 1.13 2788 729 978 1.05 2697 711 927 0.99
0.4 3385 854 1402 1.50 3094 815 1237 1.33 2837 782 1100 1.18 2681 753 992 1.06 2547 730 913 0.98 2455 712 862 0.92
0.5 3182 855 1334 1.43 2891 816 1169 1.25 2634 783 1032 1.11 2435 755 924 0.99 2301 732 845 0.91 ---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
0.6 2985 857 1261 1.35 2694 818 1096 1.18 2437 785 960 1.03 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
0.7 2764 859 1181 1.27 2473 820 1016 1.09 ---- ----
0.8 2494 861 1092 1.17 2203 822 927 0.99 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
0.9 2147 864 990 1.06 ---- ----
---- ---- ---- ----
0 Turns Open 1 Turn Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR090 Optional Drive Assembly (Down Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.3 ---- ----
0.4 ---- ----
0.5 ---- ----
0.6 ---- ----
0.7 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- 3985 863 1656 1.8 3738 831 1488 1.6
---- ---- 4230 936 1987 2.13 3986 898 1762 1.89 3737 864 1586 1.7 3490 832 1418 1.5
---- ---- 4013 937 1893 2.03 3752 900 1681 1.80 3503 865 1505 1.6 3256 833 1337 1.4
---- ---- 4086 978 2062 2.21 3803 938 1801 1.93 3532 901 1592 1.71 3283 866 1416 1.5 3035 834 1249 1.3
---- ---- 3885 979 1973 2.12 3602 940 1712 1.84 3326 903 1502 1.61 3078 868 1326 1.4 2830 836 1158 1.2
0.8 3977 1023 2189 2.35 3692 981 1886 2.02 3410 942 1625 1.74 3136 905 1415 1.52 2887 870 1239 1.3 ---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
0.9 3794 1025 2102 2.26 3509 983 1799 1.93 3226 944 1538 1.65 2962 907 1335 1.43 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1
3619 1027 2015 2.16 3335 985 1712 1.84 3052 946 1451 1.56 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1.1 3455 1029 1926 2.07 3170 987 1623 1.74 ---- ----
1.2 3300 1031 1835 1.97 ---- ---- ---- ---- ---- ----
0 Turns Open 1 Turn Open
---- ---- ---- ----
---- ---- ---- ----
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR 090 Optional Drive Assembly (Down Flow)
DR 090 Standard Drive Assembly (Down Flow)
4500
3750
0 Turns
1 Turn
2 Turns
3 Turns
3500
3250
3000
2750
2500
2250
2000
4250
4000
3750
3500
3250
3000
2750
1 Turn
0 Turns
4 Turns
5 Turns
2 Turns
4 Turns
5 Turns
3 Turns
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3
External Static Pressure (iwg)
External Static Pressure (iwg)
Unitary Products Group
31
246721-YTG-C-0606
TABLE 21: BLOWER PERFORMANCE DR090 DOWNFLOW ECONOMIZER
DR090 Optional Drive Assembly (Down Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.2 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 2755 729 970 1.04 2557 712 890 0.95
0.3 3355 854 1393 1.49 3132 815 1249 1.34 2903 781 1120 1.20 2737 753 1008 1.08 2544 730 912 0.98 2347 713 831 0.89
0.4 3154 855 1324 1.42 2924 816 1181 1.27 2692 782 1053 1.13 2494 754 940 1.01 2296 732 843 0.90 ---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
0.5 2945 857 1247 1.34 2719 818 1106 1.19 2487 784 978 1.05 2204 756 866 0.93 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
0.6 2720 859 1166 1.25 2505 820 1027 1.10 2277 786 901 0.97 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
0.7 2486 861 1089 1.17 2288 822 954 1.02 ---- ----
0.8 2284 863 1029 1.10 ---- ---- ---- ---- ---- ----
0 Turns Open 1 Turn Open
---- ---- ---- ----
---- ---- ---- ----
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR090 Optional Drive Assembly (Down Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.3 ---- ----
0.4 ---- ----
0.5 ---- ----
0.6 ---- ----
0.7 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- 4096 898 1795 1.93 3825 863 1613 1.73 3523 832 1429 1.53
---- ---- 4134 936 1945 2.09 3891 899 1731 1.86 3621 864 1548 1.66 3322 832 1361 1.46
---- ---- 4192 977 2109 2.26 3946 937 1864 2.00 3690 900 1657 1.78 3421 865 1473 1.58 3125 834 1286 1.38
---- ---- 4007 978 2028 2.18 3759 938 1782 1.91 3495 901 1577 1.69 3227 867 1392 1.49 2934 835 1205 1.29
---- ---- 3823 980 1946 2.09 3574 940 1700 1.82 3306 903 1493 1.60 3040 868 1309 1.40 2750 837 1122 1.20
0.8 3872 1025 2139 2.30 3643 982 1863 2.00 3392 942 1617 1.73 3127 905 1410 1.51 2861 870 1227 1.32 ---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
0.9 3698 1027 2055 2.20 3466 984 1778 1.91 3214 944 1532 1.64 2957 907 1333 1.43 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1
3530 1028 1967 2.11 3295 986 1691 1.81 3041 946 1445 1.55 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1.1 3368 1030 1876 2.01 3130 988 1601 1.72 ---- ----
1.2 3214 1032 1780 1.91 ---- ---- ---- ---- ---- ----
0 Turns Open 1 Turn Open
---- ---- ---- ----
---- ---- ---- ----
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR 090 Standard Drive Assembly (Down Flow)
(100% Return Economizer)
DR 090 Optional Drive Assembly (Down Flow)
(100% Return Economizer)
3500
4500
4250
4000
3750
3500
3250
3000
2750
0 Turns
1 Turn
1 Turn
2
Turns
3250
3000
2750
2500
2250
3
Turns
0 Turns
4
Turns
Turns
2 Turns
3 Turns
5
4 Turns
5 Turns
0
0.1
0.2
0.3
0.4 0.5
0.6
0.7
0.8
0.9
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3
External Static Pressure (iwg)
External Static Pressure (iwg)
32
Unitary Products Group
246721-YTG-C-0606
TABLE 22: BLOWER PERFORMANCE DR120 SIDEFLOW
DR120 Standard Drive Assembly (Side Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.3 ---- ---- ---- ---- ---- ---- ---- ---- 4396 856 1837 1.97 4093 817 1600 1.72 3828 779 1401 1.50 3601 740 1240 1.33
0.4 ---- ---- ---- ---- 4507 896 2044 2.19 4167 857 1768 1.90 3864 818 1531 1.64 3599 780 1332 1.43 3372 741 1171 1.26
0.5 ---- ---- ---- ---- 4298 897 1969 2.11 3957 858 1693 1.82 3655 819 1456 1.56 3390 781 1257 1.35 3163 742 1096 1.18
0.6 4480 937 2201 2.36 4102 898 1888 2.03 3762 859 1612 1.73 3459 820 1375 1.48 3194 782 1176 1.26 2967 744 1015 1.09
0.7 4291 938 2115 2.27 3914 899 1801 1.93 3573 860 1526 1.64 3271 822 1289 1.38 3006 783 1090 1.17 ---- ---- ---- ----
0.8 4104 940 2023 2.17 3726 901 1709 1.83 3386 862 1434 1.54 3083 823 1197 1.28 2818 785 998 1.07 ---- ---- ---- ----
0.9 3910 941 1926 2.07 3533 902 1612 1.73 3192 863 1337 1.43 2890 825 1100 1.18 ---- ---- ---- ---- ---- ---- ---- ----
1
3705 943 1824 1.96 3327 904 1510 1.62 2987 865 1235 1.32 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.1 3482 945 1717 1.84 3104 906 1404 1.51 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.2 3233 948 1607 1.72 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
0 Turns Open
1 Turns Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR120 Optional Drive Assembly (Side Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.5 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 4539 907 2170 2.33 4095 859 1825 1.96
0.6 ---- ---- ---- ---- ---- ---- ---- ---- 4976 997 2866 3.07 4747 953 2456 2.64 4299 907 2079 2.23 3856 860 1735 1.86
0.7 ---- ---- ---- ---- 5167 1041 3204 3.44 4820 998 2762 2.96 4522 954 2353 2.52 4074 908 1976 2.12 3630 860 1631 1.75
0.8 ---- ---- ---- ---- 5005 1042 3090 3.31 4658 1000 2648 2.84 4307 956 2239 2.40 3859 910 1862 2.00 3416 862 1517 1.63
0.9 ---- ---- ---- ---- 4840 1044 2969 3.18 4493 1002 2527 2.71 4100 958 2118 2.27 3652 912 1741 1.87 3209 864 1396 1.50
1
5029 1087 3317 3.56 4673 1046 2843 3.05 4325 1004 2402 2.58 3898 960 1992 2.14 3450 914 1615 1.73 3007 866 1271 1.36
1.1 4862 1089 3191 3.42 4506 1049 2717 2.91 4159 1006 2275 2.44 3697 962 1866 2.00 3249 916 1489 1.60 2805 869 1144 1.23
1.2 4697 1092 3066 3.29 4341 1051 2592 2.78 3993 1009 2151 2.31 3494 965 1741 1.87 3046 919 1364 1.46 ---- ---- ---- ----
1.3 4535 1094 2947 3.16 4179 1054 2473 2.65 3832 1011 2031 2.18 3285 967 1622 1.74 ---- ---- ---- ---- ---- ---- ---- ----
1.4 4379 1096 2835 3.04 4023 1056 2361 2.53 3676 1013 1919 2.06 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.5 4230 1098 2734 2.93 3874 1057 2260 2.42 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.6 4090 1099 2646 2.84 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
0 Turns Open
1 Turns Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR120 Standard Drive Assembly (Side Flow)
DR120 Optional Drive Assembly (Side Flow)
4750
4500
4250
4000
3750
3500
3250
3000
5250
5000
4750
4500
4250
4000
3750
3500
3250
3000
1 Turn
2 Turns
0 Turns
0 Turns
1 Turn
2 Turns
3 Turns
3 Turns
4 Turns
5 Turns
4 Turns
5 Turns
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6
External Static Pressure (iwg)
External Static Pressure (iwg)
Unitary Products Group
33
246721-YTG-C-0606
TABLE 23: BLOWER PERFORMANCE DR120 SIDEFLOW ECONOMIZER
DR120 Standard Drive Assembly (Side Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.3 ---- ---- ---- ---- ---- ---- ---- ---- 4152 858 1764 1.89 3880 820 1530 1.64 3599 783 1341 1.44 3330 746 1137 1.22
0.4 ---- ---- ---- ---- 4214 899 1948 2.09 3944 859 1693 1.82 3686 821 1460 1.57 3404 784 1271 1.36 3136 747 1067 1.14
0.5 4309 939 2099 2.25 4026 900 1875 2.01 3756 860 1620 1.74 3502 822 1388 1.49 3221 785 1198 1.29 2952 748 995 1.07
0.6 4134 940 2024 2.17 3851 901 1800 1.93 3581 861 1545 1.66 3319 823 1314 1.41 3037 786 1125 1.21 ---- ---- ---- ----
0.7 3961 941 1944 2.09 3678 902 1720 1.85 3409 863 1465 1.57 3124 824 1239 1.33 ---- ---- ---- ---- ---- ---- ---- ----
0.8 3784 942 1859 1.99 3501 904 1636 1.75 3231 864 1381 1.48 2909 825 1163 1.25 ---- ---- ---- ---- ---- ---- ---- ----
0.9 3594 944 1769 1.90 3311 905 1545 1.66 3041 866 1290 1.38 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.0 3381 946 1670 1.79 3098 907 1447 1.55 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.1 3137 948 1564 1.68 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
0 Turns Open
1 Turns Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR120 Optional Drive Assembly (Side Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.4 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 4390 904 2121 2.27 4026 856 1790 1.92
0.5 ---- ---- ---- ---- ---- ---- ---- ---- 4693 996 2736 2.94 4471 952 2320 2.49 4140 905 2012 2.16 3775 858 1681 1.80
0.6 ---- ---- ---- ---- 4863 1041 3044 3.27 4533 998 2622 2.81 4265 953 2226 2.39 3934 907 1918 2.06 3569 860 1587 1.70
0.7 ---- ---- ---- ---- 4714 1042 2939 3.15 4383 1000 2517 2.70 4090 955 2142 2.30 3758 909 1834 1.97 3394 861 1503 1.61
0.8 4876 1086 3219 3.45 4572 1044 2840 3.05 4242 1002 2419 2.59 3930 957 2062 2.21 3598 911 1754 1.88 3234 863 1423 1.53
0.9 4741 1088 3126 3.35 4437 1046 2748 2.95 4107 1004 2326 2.50 3770 959 1981 2.13 3439 913 1674 1.80 3075 865 1343 1.44
1.0 4612 1090 3037 3.26 4308 1049 2659 2.85 3978 1006 2237 2.40 3597 961 1895 2.03 3266 915 1587 1.70 2902 868 1256 1.35
1.1 4486 1092 2952 3.17 4182 1051 2574 2.76 3852 1008 2152 2.31 3396 963 1797 1.93 3065 917 1489 1.60 ---- ---- ---- ----
1.2 4363 1094 2868 3.08 4059 1053 2490 2.67 3729 1010 2068 2.22 3152 966 1682 1.80 2821 920 1375 1.47 ---- ---- ---- ----
1.3 4240 1096 2784 2.99 3936 1055 2406 2.58 3606 1012 1984 2.13 2850 968 1546 1.66 ---- ---- ---- ---- ---- ---- ---- ----
1.4 4116 1098 2700 2.90 3812 1057 2321 2.49 3482 1015 1900 2.04 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.5 3990 1101 2613 2.80 3686 1060 2234 2.40 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.6 3859 1103 2522 2.71 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
0 Turns Open
1 Turns Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR120 Optional Drive Assembly (Side Flow)
(100% Return Economizer)
DR120 Standard Drive Assembly (Side Flow)
(100% Return Economizer)
5000
4750
4500
4250
4000
3750
3500
3250
3000
2750
4500
4250
4000
3750
3500
3250
3000
2750
1 Turn
0 Turns
2 Turns
0 Turns
1 Turn
3 Turns
2 Turns
4 Turns
3 Turns
5 Turns
4 Turns
5 Turns
0.2 0.3 0.4 0.5 0.6
0.7 0.8 0.9
1
1.1
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6
External Static Pressure (iwg)
External Static Pressure (iwg)
34
Unitary Products Group
246721-YTG-C-0606
TABLE 24: BLOWER PERFORMANCE DR120 DOWNFLOW
DR120 Standard Drive Assembly (Down Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.2 4755 914 2162 2.32 4436 875 1964 2.11 4154 838 1739 1.87 3799 800 1476 1.58 3549 762 1296 1.39 3415 725 1168 1.25
0.3 4455 915 2034 2.18 4136 877 1836 1.97 3853 839 1611 1.73 3553 802 1372 1.47 3303 764 1192 1.28 3169 727 1064 1.14
0.4 4213 917 1935 2.08 3894 879 1737 1.86 3611 841 1512 1.62 3336 803 1286 1.38 3086 766 1107 1.19 2952 728 979 1.05
0.5 4006 918 1851 1.99 3687 880 1652 1.77 3405 842 1428 1.53 3123 805 1204 1.29 2872 767 1024 1.10 ---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
0.6 3811 920 1767 1.90 3492 882 1568 1.68 3209 844 1344 1.44 2885 806 1109 1.19 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
0.7 3603 922 1669 1.79 3284 884 1471 1.58 3002 846 1246 1.34 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
0.8 3359 924 1543 1.66 3040 886 1345 1.44 ---- ----
0.9 3056 926 1375 1.48 ---- ---- ---- ---- ---- ----
0 Turns Open 1 Turn Open
---- ---- ---- ----
---- ---- ---- ----
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR120 Optional Drive Assembly (Down Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.4 ---- ----
0.5 ---- ----
0.6 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- 4156 909 2226 2.39 3811 860 1669 1.79
---- ---- 4635 1003 2569 2.76 4287 957 2367 2.54 3942 910 2132 2.29 3597 861 1575 1.69
---- ---- 4773 1048 2865 3.07 4425 1004 2477 2.66 4078 959 2274 2.44 3732 911 2038 2.19 3388 862 1481 1.59
0.7 4919 1091 3182 3.41 4569 1049 2764 2.97 4221 1006 2376 2.55 3874 960 2180 2.34 3528 913 1944 2.09 3183 864 1387 1.49
0.8 4721 1092 3073 3.30 4371 1051 2655 2.85 4023 1007 2267 2.43 3676 962 2085 2.24 3330 915 1850 1.98 ---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
0.9 4530 1094 2958 3.17 4180 1052 2540 2.72 3832 1009 2152 2.31 3485 964 1990 2.14 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1
4347 1096 2839 3.05 3997 1055 2421 2.60 3649 1011 2033 2.18 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1.1 4172 1099 2717 2.91 3822 1057 2299 2.47 ---- ----
1.2 4007 1101 2595 2.78 3658 1060 2178 2.34 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1.3 3853 1104 2475 2.65 ---- ----
---- ---- ---- ----
0 Turns Open 1 Turn Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR 120 Standard Drive Assembly (Down Flow)
DR 120 Optional Drive Assembly (Down Flow)
5000
5000
4750
4500
4250
4000
3750
3500
3250
0 Turns
1 Turn
0 Turns
4750
4500
4250
4000
3750
3500
3250
3000
2750
2 Turns
1 Turn
3 Turns
4 Turns
2 Turns
3 Turns
5 Turns
4 Turns
5 Turns
3000
0.0
0.1
0.2
0.3
0.4 0.5
0.6
0.7
0.8
0.9
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3
External Static Pressure (iwg)
External Static Pressure (iwg)
Unitary Products Group
35
246721-YTG-C-0606
TABLE 25: BLOWER PERFORMANCE DR120 DOWNFLOW ECONOMIZER
DR120 Standard Drive Assembly (Down Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.2 4461 915 2037 2.19 4050 878 1801 1.93 3721 840 1557 1.67 3433 802 1324 1.42 3214 765 1157 1.24 3148 727 1056 1.13
0.3 4216 917 1936 2.08 3820 879 1707 1.83 3499 842 1466 1.57 3219 804 1241 1.33 2999 766 1073 1.15 2930 728 970 1.04
0.4 3982 919 1840 1.97 3593 881 1613 1.73 3274 844 1372 1.47 2962 806 1140 1.22 2746 768 975 1.05 ---- ----
---- ----
---- ----
---- ----
---- ----
0.5 3730 921 1730 1.86 3337 883 1496 1.61 3013 846 1251 1.34 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
0.6 3404 924 1567 1.68 2988 886 1317 1.41 ---- ----
0.7 2902 928 1288 1.38 ---- ---- ---- ---- ---- ----
0 Turns Open 1 Turn Open
---- ---- ---- ----
---- ---- ---- ----
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR120 Optional Drive Assembly (Down Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.3 ---- ----
0.4 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- 4240 958 2346 2.52 3801 911 2069 2.2 3315 863 1448 1.6
---- ---- 4437 1004 2483 2.66 4048 959 2260 2.42 3611 912 1983 2.1 3128 864 1362 1.5
0.5 4893 1091 3168 3.40 4599 1049 2780 2.98 4258 1005 2395 2.57 3870 960 2178 2.34 3435 914 1901
0.6 4726 1092 3076 3.30 4431 1050 2689 2.88 4089 1007 2305 2.47 3702 962 2098 2.25 3270 915 1821
2
2
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
0.7 4567 1094 2981 3.20 4270 1052 2596 2.78 3929 1008 2211 2.37 3543 963 2020 2.17 ---- ----
0.8 4414 1095 2883 3.09 4115 1053 2499 2.68 3774 1010 2115 2.27 3389 965 1941 2.08 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
0.9 4264 1097 2782 2.98 3963 1055 2398 2.57 3621 1012 2014 2.16 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1
4116 1099 2676 2.87 3813 1057 2293 2.46 ---- ----
1.1 3968 1102 2566 2.75 ---- ---- ---- ---- ---- ----
0 Turns Open 1 Turn Open
---- ---- ---- ----
---- ---- ---- ----
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR 120 Standard Drive Assembly (Down Flow)
(100% Return Economizer)
DR 120 Optional Drive Assembly (Down Flow)
(100% Return Economizer)
4500
5000
4750
4500
4250
4000
3750
3500
3250
3000
0 Turns
1 Turn
0 Turns
4250
4000
3750
3500
3250
3000
2750
1 Turn
2 Turns
3 Turns
4 Turns
2 Turns
3 Turns
4 Turns
5 Turns
5 Turns
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
External Static Pressure (iwg)
External Static Pressure (iwg)
36
Unitary Products Group
246721-YTG-C-0606
TABLE 26: BLOWER PERFORMANCE DR150 SIDEFLOW
DR150 Standard Drive Assembly (Side Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.5 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 4539 907 2170 2.33 4095 859 1825 1.96
0.6 ---- ---- ---- ---- ---- ---- ---- ---- 4976 997 2866 3.07 4747 953 2456 2.64 4299 907 2079 2.23 3856 860 1735 1.86
0.7 ---- ---- ---- ---- 5167 1041 3204 3.44 4820 998 2762 2.96 4522 954 2353 2.52 4074 908 1976 2.12 3630 860 1631 1.75
0.8 ---- ---- ---- ---- 5005 1042 3090 3.31 4658 1000 2648 2.84 4307 956 2239 2.40 3859 910 1862 2.00 3416 862 1517 1.63
0.9 ---- ---- ---- ---- 4840 1044 2969 3.18 4493 1002 2527 2.71 4100 958 2118 2.27 3652 912 1741 1.87 3209 864 1396 1.50
1
5029 1087 3317 3.56 4673 1046 2843 3.05 4325 1004 2402 2.58 3898 960 1992 2.14 3450 914 1615 1.73 3007 866 1271 1.36
1.1 4862 1089 3191 3.42 4506 1049 2717 2.91 4159 1006 2275 2.44 3697 962 1866 2.00 3249 916 1489 1.60 2805 869 1144 1.23
1.2 4697 1092 3066 3.29 4341 1051 2592 2.78 3993 1009 2151 2.31 3494 965 1741 1.87 3046 919 1364 1.46 ---- ---- ---- ----
1.3 4535 1094 2947 3.16 4179 1054 2473 2.65 3832 1011 2031 2.18 3285 967 1622 1.74 ---- ---- ---- ---- ---- ---- ---- ----
1.4 4379 1096 2835 3.04 4023 1056 2361 2.53 3676 1013 1919 2.06 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.5 4230 1098 2734 2.93 3874 1057 2260 2.42 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.6 4090 1099 2646 2.84 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
0 Turns Open
1 Turn Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR150 Optional Drive Assembly (Side Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.5 ---- ----
0.6 ---- ----
0.7 ---- ----
0.8 ---- ----
----
----
----
----
---- ---- ----
---- ---- ----
---- ---- ----
----
----
----
---- ---- ----
---- ---- ----
---- ---- ----
----
----
----
---- ---- ----
---- ---- ----
----
----
---- ---- ----
----
---- 5211 1066 3048 3.56
---- 5285 1111 3356 3.91 5002 1066 2948 3.44
---- 5398 1155 3698 4.31 5099 1111 3259 3.80 4816 1067 2852 3.33
---- 5812 1239 4607 5.37 5500 1198 4070 4.75 5232 1156 3604 4.20 4932 1112 3165 3.69 4649 1067 2758 3.22
0.9 5987 1279 5039 5.88 5677 1239 4512 5.26 5366 1198 3974 4.64 5081 1156 3511 4.10 4782 1112 3073 3.59 4499 1067 2666 3.11
5865 1280 4944 5.77 5555 1240 4417 5.15 5244 1199 3880 4.53 4945 1157 3420 3.99 4646 1113 2981 3.48 4363 1068 2574 3.00
1
1.1 5753 1281 4848 5.66 5443 1241 4322 5.04 5131 1200 3784 4.41 4820 1157 3327 3.88 4521 1114 2889 3.37 4238 1069 2481 2.90
1.2 5646 1281 4751 5.54 5336 1242 4225 4.93 5025 1201 3687 4.30 4703 1158 3233 3.77 4403 1115 2795 3.26 4120 1070 2388 2.79
1.3 5542 1282 4651 5.43 5232 1243 4125 4.81 4921 1202 3587 4.18 4590 1159 3137 3.66 4291 1116 2699 3.15 4008 1071 2291 2.67
1.4 5438 1284 4548 5.31 5128 1244 4021 4.69 4816 1203 3483 4.06 4481 1160 3037 3.54 4181 1117 2599 3.03 3898 1072 2192 2.56
1.5 5329 1285 4439 5.18 5019 1245 3912 4.56 4707 1204 3375 3.94 4370 1162 2933 3.42 4071 1118 2495 2.91 3788 1073 2087 2.44
1.6 5212 1286 4325 5.05 4902 1246 3798 4.43 4591 1205 3260 3.80 4256 1163 2824 3.29 3957 1119 2385 2.78 ---- ----
----
----
----
----
----
----
----
----
----
----
----
----
1.7 5085 1288 4203 4.90 4775 1248 3677 4.29 4464 1207 3139 3.66 4136 1164 2707 3.16 ---- ----
----
----
----
----
----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
1.8 4944 1289 4074 4.75 4633 1249 3548 4.14 4322 1208 3010 3.51 ---- ----
----
----
----
----
---- ---- ----
---- ---- ----
---- ---- ----
---- ---- ----
1.9 4784 1291 3937 4.59 4474 1251 3410 3.98 ---- ----
4604 1293 3789 4.42 4294 1253 3262 3.81 ---- ----
2.1 4399 1294 3630 4.24 ---- ---- ---- ---- ---- ----
1 Turn Open 2 Turns Open
----
----
----
---- ---- ----
---- ---- ----
---- ---- ----
2
3 Turns Open
4 Turns Open
5 Turns Open
6 Turns Open
DR150 Standard Drive Assembly (Side Flow)
DR150 Optional Drive Assembly (Side Flow)
5250
6250
6000
5750
5500
5250
5000
4750
4500
4250
4000
3750
1 Turn
2 Turns
0 Turns
1 Turn
5000
4750
4500
4250
4000
3750
3500
3250
3000
2 Turns
3 Turns
4 Turns
4 Turns 3 Turns
5 Turns
5 Turns
6 Turns
0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
External Static Pressure (iwg)
External Static Pressure (iwg)
Unitary Products Group
37
246721-YTG-C-0606
TABLE 27: BLOWER PERFORMANCE DR150 SIDEFLOW ECONOMIZER
DR150 Standard Drive Assembly (Side Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.4 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 4390 904 2121 2.27 4026 856 1790 1.92
0.5 ---- ---- ---- ---- ---- ---- ---- ---- 4693 996 2736 2.94 4471 952 2320 2.49 4140 905 2012 2.16 3775 858 1681 1.80
0.6 ---- ---- ---- ---- 4863 1041 3044 3.27 4533 998 2622 2.81 4265 953 2226 2.39 3934 907 1918 2.06 3569 860 1587 1.70
0.7 ---- ---- ---- ---- 4714 1042 2939 3.15 4383 1000 2517 2.70 4090 955 2142 2.30 3758 909 1834 1.97 3394 861 1503 1.61
0.8 4876 1086 3219 3.45 4572 1044 2840 3.05 4242 1002 2419 2.59 3930 957 2062 2.21 3598 911 1754 1.88 3234 863 1423 1.53
0.9 4741 1088 3126 3.35 4437 1046 2748 2.95 4107 1004 2326 2.50 3770 959 1981 2.13 3439 913 1674 1.80 3075 865 1343 1.44
1.0 4612 1090 3037 3.26 4308 1049 2659 2.85 3978 1006 2237 2.40 3597 961 1895 2.03 3266 915 1587 1.70 2902 868 1256 1.35
1.1 4486 1092 2952 3.17 4182 1051 2574 2.76 3852 1008 2152 2.31 3396 963 1797 1.93 3065 917 1489 1.60 ---- ---- ---- ----
1.2 4363 1094 2868 3.08 4059 1053 2490 2.67 3729 1010 2068 2.22 3152 966 1682 1.80 2821 920 1375 1.47 ---- ---- ---- ----
1.3 4240 1096 2784 2.99 3936 1055 2406 2.58 3606 1012 1984 2.13 2850 968 1546 1.66 ---- ---- ---- ---- ---- ---- ---- ----
1.4 4116 1098 2700 2.90 3812 1057 2321 2.49 3482 1015 1900 2.04 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.5 3990 1101 2613 2.80 3686 1060 2234 2.40 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.6 3859 1103 2522 2.71 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
0 Turns Open
1 Turns Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR150 Optional Drive Assembly (Side Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.4 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 5072 1112 3186 3.72 4790 1067 2831 3.30
0.5 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 5226 1156 3511 4.10 4933 1112 3110 3.63 4651 1067 2755 3.21
0.6 ---- ---- ---- ---- ---- ---- ---- ---- 5191 1198 3880 4.53 5093 1156 3434 4.01 4800 1112 3033 3.54 4518 1067 2677 3.12
0.7 ---- ---- ---- ---- 5471 1240 4291 5.01 5151 1199 3801 4.43 4965 1156 3355 3.91 4672 1113 2954 3.45 4390 1068 2598 3.03
0.8 5743 1280 4746 5.54 5412 1240 4211 4.91 5092 1199 3720 4.34 4842 1157 3274 3.82 4549 1113 2873 3.35 4266 1068 2517 2.94
0.9 5666 1281 4664 5.44 5335 1241 4128 4.82 5015 1200 3637 4.24 4722 1158 3191 3.72 4428 1114 2790 3.26 4146 1069 2434 2.84
1.0 5574 1282 4578 5.34 5244 1242 4042 4.72 4923 1201 3552 4.14 4604 1159 3106 3.62 4311 1115 2705 3.16 4029 1070 2349 2.74
1.1 5470 1283 4491 5.24 5139 1243 3955 4.61 4819 1202 3464 4.04 4488 1160 3018 3.52 4195 1116 2617 3.05 3913 1071 2261 2.64
1.2 5355 1284 4400 5.13 5024 1244 3864 4.51 4704 1203 3373 3.94 4372 1161 2927 3.42 4079 1117 2527 2.95 3797 1072 2171 2.53
1.3 5232 1285 4306 5.02 4901 1245 3770 4.40 4581 1204 3279 3.83 4257 1162 2834 3.31 3964 1118 2433 2.84 ---- ---- ---- ----
1.4 5103 1286 4209 4.91 4773 1247 3673 4.29 4453 1206 3182 3.71 4140 1163 2737 3.19 3847 1120 2336 2.73 ---- ---- ---- ----
1.5 4971 1287 4109 4.79 4641 1248 3573 4.17 4321 1207 3082 3.60 4021 1165 2636 3.08 ---- ---- ---- ---- ---- ---- ---- ----
1.6 4838 1289 4004 4.67 4508 1249 3468 4.05 4188 1208 2978 3.47 3899 1166 2532 2.95 ---- ---- ---- ---- ---- ---- ---- ----
1.7 4707 1290 3896 4.55 4376 1250 3360 3.92 4056 1209 2869 3.35 3774 1167 2423 2.83 ---- ---- ---- ---- ---- ---- ---- ----
1.8 4579 1291 3783 4.41 4248 1252 3247 3.79 3928 1211 2756 3.22 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.9 4456 1292 3666 4.28 4126 1253 3130 3.65 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
2.0 4342 1293 3544 4.13 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1 Turn Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
6 Turns Open
DR150 Standard Drive Assembly (Side Flow)
(100%Return Economizer)
DR150 Optional Drive Assembly (Side Flow)
(100% Return Economizer)
5000
4750
4500
4250
4000
3750
3500
3250
3000
6000
5750
5500
5250
5000
4750
4500
4250
4000
3750
1 Turn
0 Turns
0 Turns
1 Turn
2 Turns
3 Turns
4 Turns
5 Turns
3 Turns 2 Turns
4 Turns
5 Turns
0.3 0.4 0.5 0.6 0.7 0.8 0.9
1
1.1 1.2 1.3 1.4 1.5 1.6
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
External Static Pressure (iwg)
External Static Pressure (iwg)
38
Unitary Products Group
246721-YTG-C-0606
TABLE 28: BLOWER PERFORMANCE DR150 DOWNFLOW
DR150 Standard Drive Assembly (Down Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.4 ---- ----
0.5 ---- ----
0.6 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- 4156 909 2226 2.39 3811 860 1669 1.79
---- ---- 4635 1003 2569 2.76 4287 957 2367 2.54 3942 910 2132 2.29 3597 861 1575 1.69
---- ---- 4773 1048 2865 3.07 4425 1004 2477 2.66 4078 959 2274 2.44 3732 911 2038 2.19 3388 862 1481 1.59
0.7 4919 1091 3182 3.41 4569 1049 2764 2.97 4221 1006 2376 2.55 3874 960 2180 2.34 3528 913 1944 2.09 3183 864 1387 1.49
0.8 4721 1092 3073 3.30 4371 1051 2655 2.85 4023 1007 2267 2.43 3676 962 2085 2.24 3330 915 1850 1.98 ---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
0.9 4530 1094 2958 3.17 4180 1052 2540 2.72 3832 1009 2152 2.31 3485 964 1990 2.14 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1
4347 1096 2839 3.05 3997 1055 2421 2.60 3649 1011 2033 2.18 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1.1 4172 1099 2717 2.91 3822 1057 2299 2.47 ---- ----
1.2 4007 1101 2595 2.78 3658 1060 2178 2.34 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1.3 3853 1104 2475 2.65 ---- ----
---- ---- ---- ----
0 Turns Open 1 Turn Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
DR150 Optional Drive Assembly (Down Flow)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.5 ---- ----
0.6 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- 4850 1115 2991 3.49 4589 1070 2656 3.10
---- ---- 5406 1246 4041 4.71 5158 1203 3639 4.24 4906 1160 3259 3.80 4649 1116 2902 3.39 4387 1071 2567 3.00
0.7 5469 1287 4369 5.10 5226 1246 3944 4.60 4978 1204 3542 4.13 4726 1161 3162 3.69 4469 1117 2805 3.27 4207 1072 2471 2.88
0.8 5306 1288 4266 4.98 5063 1247 3841 4.48 4815 1205 3439 4.01 4562 1162 3059 3.57 4305 1117 2702 3.15 4044 1072 2368 2.76
0.9 5156 1288 4158 4.85 4912 1247 3733 4.36 4665 1205 3331 3.89 4412 1162 2952 3.44 4155 1118 2594 3.03 3894 1073 2260 2.64
1
5014 1289 4047 4.72 4771 1248 3622 4.23 4523 1206 3220 3.76 4271 1163 2840 3.31 4014 1119 2483 2.90 3752 1073 2149 2.51
1.1 4877 1290 3934 4.59 4634 1249 3509 4.09 4387 1207 3107 3.63 4134 1164 2728 3.18 3877 1119 2370 2.77 ---- ----
1.2 4741 1291 3821 4.46 4498 1250 3396 3.96 4250 1208 2994 3.49 3998 1165 2614 3.05 3741 1120 2257 2.63 ---- ----
---- ----
---- ----
---- ----
---- ----
---- ----
1.3 4601 1292 3709 4.33 4358 1251 3284 3.83 4110 1209 2882 3.36 3858 1166 2502 2.92 ---- ----
1.4 4454 1295 3600 4.20 4211 1254 3175 3.70 3963 1211 2773 3.24 3710 1168 2393 2.79 ---- ----
---- ---- ---- ----
---- ---- ---- ----
---- ---- ---- ----
1.5 4294 1297 3495 4.08 4051 1256 3070 3.58 3803 1214 2668 3.11 ---- ----
---- ---- ---- ----
1 Turn Open 2 Turns Open 3 Turns Open 4 Turns Open
5 Turns Open
6 Turns Open
DR 150 Standard Drive Assembly (Down Flow)
DR 150 Optional Drive Assembly (Down Flow)
5000
5500
5250
5000
4750
4500
4250
4000
3750
0 Turns
1 Turn
0 Turns
1 Turn
4750
4500
4250
4000
3750
3500
3250
3000
2 Turns
2 Turns
3 Turns
4 Turns
3 Turns
4 Turns
5 Turns
5 Turns
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3
0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
External Static Pressure (iwg)
External Static Pressure (iwg)
Unitary Products Group
39
246721-YTG-C-0606
TABLE 29: BLOWER PERFORMANCE DR150 DOWNFLOW ECONOMIZER
DR150 Standard Drive Assembly (Down Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.3 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 4240 958 2346 2.52 3801 911 2069 2.22 3315 863 1448 1.55
0.4 ---- ---- ---- ---- ---- ---- ---- ---- 4437 1004 2483 2.66 4048 959 2260 2.42 3611 912 1983 2.13 3128 864 1362 1.46
0.5 4893 1091 3168 3.40 4599 1049 2780 2.98 4258 1005 2395 2.57 3870 960 2178 2.34 3435 914 1901 2.04 ---- ---- ---- ----
0.6 4726 1092 3076 3.30 4431 1050 2689 2.88 4089 1007 2305 2.47 3702 962 2098 2.25 3270 915 1821 1.95 ---- ---- ---- ----
0.7 4567 1094 2981 3.20 4270 1052 2596 2.78 3929 1008 2211 2.37 3543 963 2020 2.17 ---- ---- ---- ---- ---- ---- ---- ----
0.8 4414 1095 2883 3.09 4115 1053 2499 2.68 3774 1010 2115 2.27 3389 965 1941 2.08 ---- ---- ---- ---- ---- ---- ---- ----
0.9 4264 1097 2782 2.98 3963 1055 2398 2.57 3621 1012 2014 2.16 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1
4116 1099 2676 2.87 3813 1057 2293 2.46 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1.1 3968 1102 2566 2.75 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
0 Turns Open 1 Turn Open 2 Turns Open 3 Turns Open 4 Turns Open 5 Turns Open
DR150 Optional Drive Assembly (Down Flow) (100% Return Economizer)
ESP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP CFM RPM WATT BHP
0.4 5344 1288 4291 5.01 5247 1246 3957 4.62 5128 1204 3624 4.23 4982 1160 3295 3.84 4803 1115 2972 3.47 4589 1070 2656 3.1
0.5 5121 1289 4132 4.82 5007 1247 3803 4.44 4871 1205 3476 4.06 4710 1161 3153 3.68 4520 1117 2834 3.31 4297 1071 2521 2.94
0.6 4944 1289 3989 4.65 4823 1248 3664 4.27 4677 1205 3341 3.90 4507 1162 3021 3.52 4309 1117 2705 3.16 4083 1072 2393 2.79
0.7 4797 1290 3866 4.51 4673 1249 3542 4.13 4523 1206 3220 3.76 4348 1162 2902 3.39 4146 1118 2588 3.02 3917 1073 2277 2.66
0.8 4667 1292 3761 4.39 4545 1249 3435 4.01 4395 1207 3114 3.63 4218 1163 2797 3.26 4014 1119 2483 2.9 3783 1073 2173 2.54
0.9 4549 1293 3669 4.28 4432 1251 3342 3.90 4283 1207 3021 3.52 4105 1164 2704 3.15 3901 1119 2390 2.79 ---- ---- ---- ----
1
4438 1295 3588 4.19 4326 1252 3260 3.80 4180 1208 2937 3.43 4004 1165 2619 3.06 3800 1120 2306 2.69 ---- ---- ---- ----
1.1 4327 1297 3515 4.10 4223 1253 3183 3.71 4081 1210 2859 3.34 3907 1166 2541 2.96 3704 1121 2227 2.6 ---- ---- ---- ----
1.2 4211 1299 3446 4.02 4115 1255 3111 3.63 3979 1211 2785 3.25 3809 1167 2465 2.88 ---- ---- ---- ---- ---- ---- ---- ----
1.3 4082 1302 3377 3.94 3998 1257 3038 3.54 3869 1213 2710 3.16 3703 1168 2388 2.79 ---- ---- ---- ---- ---- ---- ---- ----
1.4 3932 1306 3308 3.86 3862 1260 2964 3.46 3742 1216 2632 3.07 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ----
1 Turn Open
2 Turns Open
3 Turns Open
4 Turns Open
5 Turns Open
6 Turns Open
DR 150 Standard Drive Assembly (Down Flow)
(100% Return Economizer)
DR 150 Optional Drive Assembly (Down Flow)
(100% Return Economizer)
5000
5500
5250
5000
4750
4500
4250
4000
3750
0 Turns
1 Turn
1 Turn
2 Turns
4750
4500
4250
4000
3750
3500
3250
3000
3 Turns
4 Turns
2 Turns
3 Turns
5 Turns
6 Turns
4 Turns
5 Turns
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1
1.1 1.2
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1
1.1 1.2 1.3 1.4 1.5
External Static Pressure (iwg)
External Static Pressure (iwg)
40
Unitary Products Group
246721-YTG-C-0606
TABLE 30: ADDITIONAL STATIC RESISTANCE
Electric Heat KW
24
CFM
Gas Heat
9
18
36
54
2300
2500
2700
2900
3100
3300
3500
3700
3900
4100
4300
4500
4700
4900
5100
5300
5500
5700
5900
6100
6300
0.08
0.09
0.11
0.12
0.14
0.16
0.18
0.20
0.23
0.25
0.28
0.30
0.33
0.36
0.39
0.42
0.45
0.48
0.52
0.56
0.60
0.07
0.08
0.09
0.10
0.12
0.13
0.15
0.17
0.19
0.21
0.23
0.25
0.28
0.30
0.33
0.35
0.38
0.41
0.44
0.47
0.50
0.08
0.09
0.10
0.11
0.13
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.29
0.31
0.34
0.37
0.40
0.43
0.46
0.49
0.53
0.09
0.10
0.12
0.13
0.15
0.17
0.19
0.21
0.23
0.25
0.28
0.30
0.33
0.35
0.38
0.41
0.44
0.47
0.50
0.53
0.56
0.10
0.11
0.13
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.29
0.31
0.34
0.37
0.40
0.43
0.46
0.49
0.53
0.56
0.59
0.13
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.31
0.34
0.37
0.40
0.43
0.46
0.49
0.53
0.56
0.59
0.62
0.65
TABLE 31: ELECTRIC HEAT MINIMUM SUPPLY AIR CFM
UNIT MODEL SIZE, NOMINAL TONS
HEATER
090
120
MINIMUM SUPPLY AIR CFM
N/A
150
VOLTAGE
kW
2250
2250
2250
2250
N/A
N/A
3750
3750
3750
4000
N/A
9
3000
3000
3000
3500
N/A
18
24
36
54
9
208/230
2250
2250
2250
2250
N/A
3000
3000
3000
3000
N/A
3750
3750
3750
3750
N/A
18
24
36
54
9
480
600
2250
2250
2250
2250
N/A
3000
3000
3000
3500
3750
3750
3750
3750
18
24
36
54
TABLE 32: INDOOR BLOWER SPECIFICATIONS
MOTOR
RPM Eff.
1-1/2 1725 80% 1.15
MOTOR SHEAVE
BLOWER SHEAVE
MODEL
DR090
DR120
DR150
BELT
HP
SF Frame Datum Dia. (in.) Bore (in.) Model Datum Dia. (in.) Bore (in.) Model
56
56
3.4 - 4.4
3.4 - 4.4
3.4 - 4.4
3.4 - 4.4
3.4 - 4.4
4.3 - 5.3
7/8
7/8
1VM50
1VM50
1VM50
1VM50
1VM50
1VP56
9.0
7.5
8.5
7.0
7.0
6.7
1
1
1
1
1
1
AK94
AK79
AK89
AK74
AK74
BK77
A57
A55
A56
A54
A54
BX55
2
2
3
3
5
1725 80% 1.15
1725 80% 1.15
1725 80% 1.15
1725 80% 1.15
1725 87% 1.15
56
7/8
56
7/8
56
7/8
184T
1 1/8
TABLE 33: POWER EXHAUST SPECIFICATIONS
MOTOR
ELECTRICAL
FLA
POWER EXHAUST
MODEL
FUSE
SIZE
CFM @
0.1 ESP
VOLT
PHASE
RPM1
1075
1050
HP
QTY
LRA
MCA
2PE0473125
2PE0473146
2PE0473158
208/230
460
575
1
1
1
24.9
5.0
2.2
1.5
6.3
2.8
1.9
10
5
4
0.75
1
3,800
N/A
1.
Motors are multi-tapped and factory-wired for high speed.
Unitary Products Group
41
246721-YTG-C-0606
FRONT
LEFT
FRONT
B
C
C
LEFT
B
A
A
D
D
FIGURE 15 - DR150 UNIT 4 POINT LOAD
FIGURE 12 - DR090, 120 UNITS 4 POINT LOAD
FRONT
FRONT
LEFT
D
C
D
LEFT
C
B
A
E
A
E
B
F
F
FIGURE 13 - DR090, 120 UNITS 6 POINT LOAD
TABLE 34: 4 POINT LOAD WEIGHT
FIGURE 16 - DR150 UNIT 6 POINT LOAD
TABLE 35: 6 POINT LOAD WEIGHT
Location (lbs.)
Model
Locations (lbs.)
Model
A
B
C
D
A
B
C
D
E
F
DR090
DR120
DR150
250
276
293
215
237
370
309
341
479
374
408
393
DR090
DR120
DR150
171
188
191
154
170
217
139
154
253
201
220
329
225
248
286
258
282
260
(090) 23"
25-1/2"
(090) 38"
47-1/2"
25-½"
60"
FRONT
FRONT
LEFT
LEFT
FIGURE 14 - UNIT CENTER OF GRAVITY DR090, 120
FIGURE 17 - UNIT CENTER OF GRAVITY DR150
42
Unitary Products Group
246721-YTG-C-0606
TABLE 36: UNIT WEIGHT
Shipping
Weight (lbs.)
Operating
Weight (lbs.)
Model
DR090
DR120
DR150
W/ECON.
W/PE
1163
1277
1560
85
1148
1262
1545
84
150
49
148
49
1
W/ELECT. HEAT
2
110
110
W/GAS HEAT
1.
54 KW Heater
2.
8 Tube Heat Exchanger
30-11/32
See Detail
A
50-3/4
Control
Entry
Ø 7/8
Power
Entry
Ø 2-1/2
Power
Entry
4-1/4
Ø 2-1/2
11-1/2
Convenience
Power
Outlet
Entry
For Baserail
Dimensions
See Detail B
Ø 7/8
FRONT
17-3/16
For Drain
Dimensions
See Detail C
30-3/16
24-3/16
6-3/16
59
LEFT
89
27
FIGURE 18 - DR090/120 UNIT DIMENSIONS
Unitary Products Group
43
246721-YTG-C-0606
119-7/16
For Gas Pipe Entry
see DETAIL A
Convenience
Outlet
Power
Entry
2-1/2
30-11/32
Convenience
Outlet Power
Entry 7/8
4-1/4
Control
Entry
7/8
11-1/2
50-3/4
FRONT
For Baserail
Dimensions
see
30-3/16
17-3/16
24-3/16
DETAIL B
59
6-3/16
89
27
LEFT
For Drain Dimensions
see DETAIL C
FIGURE 19 - DR150 UNIT DIMENSIONS
G
a
s
P
i
p
e
I
n
l
e
t
DETAIL A
2-3/8
DETAIL B
5
-
1
/
4
B
P
a
a
s
n
e
1
7
-
1
3
/
1
6
3-3/4
V
i
e
w
o
f
W
a
l
l
A
c
r
o
s
s
f
r
o
m
C
o
i
l
TABLE 37: UNIT CLEARANCES
3-9/16
Top1
72”
36”
36”
Right
Left
12”
36”
0”
Front
Rear2
Bottom3
DETAIL C
1.
Units must be installed outdoors. Overhanging structure or
shrubs should not obstruct condenser air discharge outlet.
2.
To remove the slide-out drain pan, a rear clearance of 60” is
required. If space is unavailable, the drain pan can be
removed through the front by separating the corner wall.
5
-
3
/
8
3.
Units may be installed on combustible floors made from
wood or class A, B or C roof covering materials.
44
Unitary Products Group
246721-YTG-C-0606
R
I
G
H
T
8
0
-
5
/
8
I
N
S
U
L
A
T
E
D
D
E
C
K
U
N
D
E
R
C
O
N
D
E
N
S
E
R
S
E
C
T
I
O
N
2
0
S
U
P
P
L
Y
2
0
6
R
E
T
U
R
N
2
T
Y
P
.
3
0
I
N
S
O
U
L
A
T
E
D
D
E
C
K
U
N
D
E
R
5
0
-
1
/
2
C
M
P
R
E
S
S
O
R
S
E
C
T
I
O
N
F
R
O
N
T
8
o
r
1
4
FIGURE 20 - PREDATOR® ROOF CURB DIMENSIONS
2
T
Y
P
2
3
4
3
0
-
1
/
2
5
0
-
1
/
2
8
0
-
5
/
8
2
6
R
E
T
U
R
N
S
U
P
P
L
Y
1
0
7
6
-
5
/
8
5
9
-
1
/
4
9
4
F
R
O
N
T
R
I
G
H
T
6
4
-
1
/
4
FIGURE 21 - SUNLINE™ TO PREDATOR® TRANSITION ROOF CURBS
Unitary Products Group
45
246721-YTG-C-0606
32-11/16
6-13/16
Supply
Air
6-13/16
6-13/16
Return
Air
24
LEFT
27-1/2
21
18
21-3/16
19-3/16
17-3/16
12-5/16
7-1/8
FRONT
14-23/32
16-3/8
Bottom
Condensate
Drain
Bottom
Bottom
Gas Supply Entry
18-1/16
19-5/8
Power, Control and
Convenience Outlet
Wiring Entries
63-1/2
FIGURE 22 - BOTTOM DUCT OPENINGS (FROM ABOVE)
FIGURE 23 - DR090, 120 REAR DUCT DIMENSIONS
46
Unitary Products Group
246721-YTG-C-0606
Dot
Plugs
18-1/4
Return
Air
28-1/4
Supply
Air
18-1/4
18-1/16
2-31/32
31-11/16
28-1/4
5-5/32
FIGURE 24 - DR150 REAR DUCT DIMENSIONS
58 1/4
88 1/4
39 1/2
or
47 1/2
Outside Air
Intake Hood
35 3/4
Relief Hood for
Power Exhaust or
Barometric Relief
26
25 3/4
26
30 1/4
FIGURE 25 - DOWNFLOW ECONOMIZER HOOD DETAIL
Unitary Products Group
47
246721-YTG-C-0606
FIGURE 26 - DOWNFLOW ECONOMIZER HOOD DETAIL
TABLE 38: ECONOMIZER USAGE
Application
Bottom Return
Side Return
Cabinet Height
Description
Model
All
All
Downflow economizer with barometric relief
Horizontal economizer without barometric relief
2EE04705424
1
2EE04705524
2
42"
50"
Slab Economizer, 42” tall cabinet
Slab Economizer, 50” tall cabinet
2EE04705624
ERV or End Return
2
2EE04705224
1.
Barometric relief must be ordered seperately and installed in duct work.
Barometric relief or fresh air hood not included. Must be ordered seperately.
2.
48
Unitary Products Group
246721-YTG-C-0606
2EE04705424
Fresh Air Hood Fresh Air Damper Return Air Damper
Barometric Relief Damper
2EE04705424
2EE04705424
2EE04705424
2EE04705424
Barometric Relief Hood
FIGURE 27 - FACTORY INSTALLED DOWNFLOW ECONOMIZER
2EE04705424
Fresh Air Hood
2EE04705424 2EE04705424
Fresh Air Damper Return Air Damper
2PE047032XX
Power Exhaust
2EE04705424
Barometric Relief Damper
2EE04705424
Barometric Relief Hood
FIGURE 28 - FIELD INSTALLED DOWNFLOW ECONOMIZER W/POWER EXHAUST
Unitary Products Group
49
246721-YTG-C-0606
2EE04705524
Return Air Damper
Field Installed
Duct Work
2EE04705524
Fresh Air Damper
2PE047032XX
Power Exhaust
1EH0408
Barometric
Relief Damper
1EH0408
Barometric
Relief Hood
2EE04705524
Fresh Air Hood
FIGURE 29 - FIELD INSTALLED HORIZONTAL ECONOMIZER W/POWER EXHAUST
1EH0409
Fresh Air Hood
2EE04705X24
Slab Economizer
2PE047032XX
Power Exhaust
1EH0409 Barometric
Relief Damper
1EH0409 Barometric
Relief Hood
FIGURE 30 - SLAB ECONOMIZER DOWNFLOW W/POWER EXHAUST
50
Unitary Products Group
246721-YTG-C-0606
1EH0409
Fresh Air Hood
Field Installed
Duct Work
2EE04705X24
Slab Economizer
1EH0409
Barometric Relief Hood
2PE047032XX
Power Exhaust
1EH0409
Barometric Relief Damper
FIGURE 31 - SLAB ECONOMIZER END RETURN W/POWER EXHAUST
Unitary Products Group
51
246721-YTG-C-0606
THERMOSTAT 1
TERMINALS
( RCB )
REHEAT
CONTROL BOARD
RC
RH
Y1
R
Y1
Y2
W1
W2
G
Y2
W1
W2
G
C
C
OCC
X1
X3
X4
A1
A2
T
TERMINAL BLOCK
RH
2
HUM
HUM
1
2
3
4
DEHUMIDISTAT3
T
TO REMOTE SENSOR
2ET04701324 IF USED
1 Electronic programmable Thermostat 2ET0770010024
( includes subbase).
2 Terminals A1 and A2 provide a relay output to close the
outdoor economizer dampers when the thermostat
switches to the set-back position.
3 Dehumidistat closes on rise in humidity.
TYPICAL
THERMOSTAT
RC
R
Y1
Y2
G
RH
Y1
Y2
G
( RCB )
REHEAT
CONTROL
BOARD
W1
W1
W2
C
W2
TERMINAL
BLOCK
RH
OCC
C
1
2
DEHUMIDISTAT1
3
4
HUM
1Dehumidistat closes on rise in humidity.
FIGURE 32 - TYPICAL LOW VOLTAGE FIELD WIRING
52
Unitary Products Group
246721-YTG-C-0606
TERMINAL BLOCK TB1
FACTORY OR FIELD
SUPPLIED DISCONNECT
GROUND
LUG
THREE
PHASE
POWER
SUPPLY
FIGURE 33 - FIELD WIRING DISCONNECT-COOLING UNIT WITH/WITHOUT ELECTRIC HEAT
CONTACTOR 1M
T1
T2
L2
T3
L3
L1
FACTORY OR FIELD
SUPPLIED DISCONNECT
GROUND
LUG
THREE
PHASE
POWER
SUPPLY
FIGURE 34 - FIELD WIRING DISCONNECT-COOLING UNIT WITH GAS HEAT
Unitary Products Group
53
246721-YTG-C-0606
FIGURE 35 - DR090, 120 COOLING UNIT WITH GAS HEAT WIRING 230 VOLT DIAGRAM
54
Unitary Products Group
246721-YTG-C-0606
FIGURE 36 - DR150 COOLING UNIT WITH GAS HEAT WIRING 230 VOLT DIAGRAM
Unitary Products Group
55
246721-YTG-C-0606
FIGURE 37 - DR090, 120 COOLING UNIT WITH/WITHOUT ELECTRIC HEAT WIRING DIAGRAM
56
Unitary Products Group
246721-YTG-C-0606
FIGURE 38 - DR150 COOLING UNIT WITH/WITHOUT ELECTRIC HEAT WIRING DIAGRAM
Unitary Products Group
57
246721-YTG-C-0606
FIGURE 39 - DR090, 120 COOLING UNIT WITH GAS HEAT WIRING 460, 575 VOLT 50 HZ DIAGRAM
58
Unitary Products Group
246721-YTG-C-0606
FIGURE 40 - DR150 COOLING UNIT WITH GAS HEAT WIRING 460, 575 & 50 HZ DIAGRAM
Unitary Products Group
59
246721-YTG-C-0606
FIGURE 41 - DR090 AND 120 REHEAT WIRING DIAGRAM
60
Unitary Products Group
246721-YTG-C-0606
FIGURE 42 - DR150 REHEAT WIRING DIAGRAM
Unitary Products Group
61
246721-YTG-C-0606
GUIDE SPECIFICATIONS
PREDATOR® MagnaDRY™
DR 090, 120 & 150
the cabinet to allow accurate air measurements of evaporator
fan performance without removing panels or creating bypass
of the coils. Condensate pan shall be slide out design, con-
structed of a non corrosive material, internally sloped and
conforming to ASHRAE 62-B9 standards. Condensate con-
nection shall be a minimum of ¾” I.D. female and be rigid
mount connection.
GENERAL
Units shall be manufactured by York International Unitary
Products Group in an ISO 9001 certified facility. YORK®
®
Predator MagnaDRY™ units are convertible single pack-
ages with a common footprint cabinet and common roof curb
for all 7-1/2 through 12-1/2 ton models. All units have two
compressors with independent refrigeration circuits to pro-
vide 2 stages of cooling. The units were designed for light
commercial applications and can be easily installed on a roof
INDOOR (EVAPORATOR) FAN ASSEMBLY
®
curb, slab, or frame. All Predator MagnaDRY™ units are
Fan shall be a belt drive assembly and include an adjustable
pitch motor pulley. Job site selected brake horsepower shall
not exceed the motors nameplate horsepower rating plus the
service factor. Units shall be designed to operate within the
service factor. Fan wheel shall be double inlet type with for-
ward curve blades, dynamically balanced to operate
smoothly throughout the entire range of operation. Airflow
design shall be constant volume. Bearings shall be sealed
and permanently lubricated for longer life and no mainte-
nance. Entire blower assembly and motor shall be slide out
design.
self-contained and assembled on rigid full perimeter base
rails allowing for 3-way forklift access and overhead rigging.
Every unit is completely charged, wired, piped, and tested at
the factory to provide a quick and easy field installation. All
units are convertible between side and down airflow. Inde-
pendent economizer designs are used on side and down dis-
®
charge applications, as well as all tonnage sizes. Predator
MagnaDRY™ units are available in the following configura-
tions: cooling only, cooling with electric heat, and cooling with
gas heat. Electric heaters are available as factory-installed
options or field-installed accessories.
OUTDOOR (CONDENSER) FAN ASSEMBLY
DESCRIPTION
The outdoor fans shall be of the direct drive type, discharge
air vertically, have aluminum blades riveted to corrosion
resistant steel spider brackets and shall be dynamically bal-
anced for smooth operation. The outdoor fan motors shall
have permanently lubricated bearings internally protected
against overload conditions and staged independently. A
cleaning window shall be provided on two sides of the units
for coil cleaning.
Units shall be factory assembled, single package, (Elec/Elec,
Gas/Elec), designed for outdoor installation. Units shall have
a minimum EER of 9.0. They shall have built in field convert-
ible duct connections for down discharge supply/return or
horizontal discharge supply/return and be available with fac-
tory installed options or field installed accessories. The units
shall be factory wired, piped and charged with R-22 refriger-
ant and factory tested prior to shipment. All unit wiring shall
be both numbered and color coded. The cooling performance
shall be rated in accordance with DOE and ARI test proce-
dures. Units shall be CSA certified to ANSI Z21.47 and UL
1995/CAN/CSA No. 236-M90 standards.
REFRIGERANT COMPONENTS
Compressors:
A. Shall be fully hermetic type, direct drive, internally pro-
tected with internal high-pressure relief and over temper-
ature protection. The hermetic motor shall be suction gas
cooled and have a voltage range of + or – 10% of the
unit nameplate voltage.
UNIT CABINET
Unit cabinet shall be constructed of G90 galvanized steel with
exterior surfaces coated with a non-chalking, powder paint
finish, certified at 1000 hours salt spray test per ASTM-B117
standards. Indoor blower sections shall be insulated with up
to 1/2” thick insulation coated on the airside. Aluminum foil
faced insulation shall be used in the unit’s compartments and
be fastened to prevent insulation from entering the air
stream. Cabinet doors shall be hinged with tool-less access
for easy servicing and maintenance. Full perimeter base rails
shall be provided to assure reliable transit of equipment,
overhead rigging, fork truck access and proper sealing on
roof curb applications. Disposable 2” filters shall be furnished
and be accessible through hinged access door. Fan perfor-
mance measuring ports shall be provided on the outside of
B. Shall have internal spring isolation and sound muffling to
minimize vibration and noise, and be externally isolated
on a dedicated, independent mounting.
Coils:
A. Evaporator and condenser coils shall have aluminum
plate fins mechanically bonded to seamless internally
enhanced copper tubes with all joints brazed. Special
Phenolic coating shall be available as a factory option.
B. Evaporator and condenser coils shall be of the direct
expansion, draw-thru design.
62
Unitary Products Group
246721-YTG-C-0606
Refrigerant Circuit and Refrigerant Safety Components shall
include:
air entering temperature of 40 ºF. Burners shall be of the in-
shot type, constructed of aluminum-coated steel. All gas pip-
ing shall enter the unit cabinet at a single location, through
either the side or bottom, without any field modifications. An
integrated control board shall provide timed control of evapo-
rator fan functioning and burner ignition. Heating section shall
be provided with the following minimum protection:
A. Independent fixed-orifice or thermally operated expan-
sion devices.
B. Solid core filter drier/strainer to eliminate any moisture or
foreign matter.
A. Primary and auxiliary high-temperature limit switches.
B. Induced draft pressure sensor.
C. Accessible service gage connections on both suction
and discharge lines to charge, evacuate, and measure
refrigerant pressure during any necessary servicing or
troubleshooting, without losing charge.
C. Flame roll out switch (manual reset).
D. The unit shall have two independent refrigerant circuits,
equally split in 50% capacity increments.
D. Flame proving controls. Unit shall have two independent
st
nd
stages of capacity (60% 1 stage, 100% 2 stage).
Unit Controls:
ELECTRIC HEATING SECTION (IF EQUIPPED)
A. Unit shall be complete with self-contained low-voltage
control circuit protected by a resettable circuit breaker on
the 24-volt transformer side.
An electric heating section, with nickel chromium elements,
shall be provided in a range of 9 thru 54 KW, offering two
states of capacity all sizes. The heating section shall have a
primary limit control(s) (automatic reset) to prevent the heat-
ing element system from operating at an excessive tempera-
ture. The Heating Section assembly shall slide out of the unit
for easy maintenance and service. Units with Electric Heating
Sections shall be wired for a single point power supply with
branch circuit fusing (where required).
B. Unit shall incorporate a lockout circuit which provides
reset capability at the space thermostat or base unit
should any of the following standard safety devices trip
and shut off compressor:
C. Loss-of-charge/Low-pressure switch.
(1) High-pressure switch.
UNIT OPERATING CHARACTERISTICS
Unit shall be capable of starting and running at 125 ºF out-
door temperature, exceeding maximum load criteria of ARI
Standard 340/360. The compressor, with standard controls,
shall be capable of operation down to 0 ºF outdoor tempera-
ture. Unit shall be provided with fan time delay to prevent cold
air delivery before heat exchanger warms up. (Gas heat only)
(2) Freeze-protection thermostat, evaporator coil. If any
of the above safety devices trip, an LED (light-emitting
diode) indicator shall flash a diagnostic code that indi-
cates which safety switch has tripped.
D. Unit shall incorporate “AUTO RESET” compressor over
temperature, over current protection.
ELECTRICAL REQUIREMENTS - All unit power wiring shall
enter unit cabinet at a single factory provided location and be
capable of side or bottom entry to minimize roof penetrations
and avoid unit field modifications. Separate side and bottom
openings shall be provided for the control wiring.
E. Unit shall operate with conventional thermostat designs
and have a low voltage terminal strip for easy hook-up.
F. Unit control board shall have on-board diagnostics and
fault code display.
STANDARD LIMITED WARRANTIES - Compressor – 5
Years, Heat Exchanger – 10 Years, Elect. Heat Elem. – 5
Years, Parts – 1 Year
G. Standard controls shall include anti-short cycle and low
voltage protection, and permit cooling operation down to
0 ºF.
FACTORY INSTALLED OPTIONAL OUTDOOR AIR (Shall
be made available by either/or):
H. Control board shall monitor each refrigerant safety
switch independently.
1. ELECTRONIC ENTHALPY AUTOMATIC ECONO-
MIZER – Outdoor and return air dampers that are inter-
locked and positioned by a fully-modulating, spring-
return damper actuator. The maximum leakage rate for
the outdoor air intake dampers shall not exceed 2%
when dampers are fully closed and operating against a
pressure differential of 0.5 IWG. A unit-mounted potenti-
ometer shall be provided to adjust the outdoor and return
air damper assembly to take in outdoor air to meet the
minimum ventilation requirement of the conditioned
space during normal operation. During economizer oper-
ation, a mixed-air temperature control shall modulate the
I. Control board shall retain last 5 fault codes in non-vola-
tile memory, which will not be lost in the event of a power
loss.
GAS HEATING SECTION (IF EQUIPPED)
Heat exchanger and exhaust system shall be constructed of
aluminized steel and shall be designed with induced draft
combustion with post purge logic, energy saving direct spark
ignition, and redundant main gas valve. The heat exchanger
shall be of the tubular type, constructed of T1-40 aluminized
steel for corrosion resistance and allowing minimum mixed
Unitary Products Group
63
outdoor and return air damper assembly to prevent the
supply air temperature from dropping below 55 ºF.
Changeover from compressor to economizer operation
shall be provided by an integral electronic enthalpy con-
trol that feeds input into the basic module. The outdoor
intake opening shall be covered with a rain hood that
matches the exterior of the unit. Water eliminator/filters
shall be provided. Simultaneous economizer/compressor
operation is also possible. Dampers shall fully close on
power loss. Available with barometric relief or power
exhaust.
•
•
•
COIL GUARD - Designed to prevent condenser coil
damage.
BAS CONTROLS - Include supply air sensor, return air
sensor, dirty filter indicator and air proving switch.
DIRTY FILTER SWITCH – This kit includes a differential
pressure switch that energizes the fault light on the unit
thermostat, indicating that there is an abnormally high-
pressure drop across the filters.
•
•
BREAKER – An HACR breaker can be factory installed
on gas heat units or cooling units with electric heat.
2. MOTORIZED OUTDOOR AIR DAMPERS – Outdoor
and return air dampers that are interlocked and posi-
tioned by a 2-position, spring-return damper actuator.
The maximum leakage rate for the outdoor air intake
dampers shall not exceed 2% when dampers are fully
closed and operating against a pressure differential of
0.5 IWG. A unit-mounted potentiometer shall be provided
to adjust the outdoor and return air damper assembly to
take in the design CFM of outdoor air to meet the ventila-
tion requirements of the conditioned space during normal
operation. Whenever the indoor fan motor is energized,
the dampers open up to one of two pre-selected posi-
tions – regardless of the outdoor air enthalpy. Dampers
return to the fully closed position when the indoor fan
motor is de-energized. Dampers shall fully close on
power loss.
DISCONNECT SWITCH - A disconnect can be factory
installed on a cooling only units sized for the largest elec-
tric heat available.
•
STAINLESS STEEL HEAT EXCHANGER – For applica-
tions in a corrosive environment, this option provides a
full stainless steel heat exchanger assembly.
•
•
STAINLESS STEEL DRAIN PAN - Provides years of
trouble free operation in corrosive environments.
SMOKE DETECTOR – A smoke detector can be factory
mounted and wired in the supply and/or return air com-
partments.
OTHER PRE-ENGINEERED ACCESSORIES AVAILABLE
•
ROOF CURB - 14” and 8” high, full perimeter knockdown
curb, with hinged design for quick assembly.
ADDITIONAL FACTORY INSTALLED OPTIONS
•
BAROMETRIC RELIEF DAMPER – (Unit mounted –
Downflow, Duct Mounted – Horizontal) – Contains a rain
hood, air inlet screen, exhaust damper and mounting
hardware. Used to relieve internal air pressure through
the unit during economizer operation.
•
ALTERNATE INDOOR BLOWER MOTOR – For appli-
cations with high restrictions, units are available with
optional indoor blower motors that provide higher static
output and/or higher airflow.
•
CONVENIENCE OUTLET (POWERED/NON-POW-
ERED) – Unit can be provided with an optional 120VAC
GFCI outlet with cover on the corner of the unit housing
the compressors.
•
•
PROPANE CONVERSION KIT – Contains new orifices
and gas valve springs to convert from natural to L.P. gas.
60 ºF GAS HEAT KIT – Provides an electric heat kit for
the gas compartment for use in extreme low ambient
conditions.
•
•
ELECTRIC HEAT - Electric Heaters range from 9 kW to
54 kW and are available in all the voltage options of the
base unit.
•
•
ECONOMIZER (Downflow and Horizontal flow)
POWER EXHAUST – (Unit mount – Downflow, Duct
mount – Horizontal flow)
PHASE MONITOR - Designed to prevent damage in out-
of-phase condition.
•
DUAL ENTHALPY KIT - Provides a second input to
economizer to monitor return air.
Subject to change without notice. Printed in U.S.A.
246721-YTG-C-0606
Copyright © 2006 by Unitary Products Group . All rights reserved. Supersedes: 246721-YTG-B-0305/036-21551-001-B-0305
Unitary
Products
Group
5005
York
Drive
Norman
OK
73069
|
Lexmark X 954dhe User Manual
Master Lock Br150ce User Manual
Samsung As12aa B Mcf User Manual
Sanyo Stb0810c1 User Manual
Sharp Ar C260 User Manual
Sharp Ux A1000 User Manual
Sony Np F330 User Manual
Tecumseh Automobile Parts Oh318ea User Manual
The Speaker Company Tsc Barcode Reader Tdp 225 User Manual
White Rodgers Acb2000 User Manual