Jump-Start System
OWNER’S MANUAL
& WARRANTY INFORMATION
1. 12 volt DC charger/output socket,
with overload protection
2. Safety on/off power switch (no key required)
3. Charge status button
4. Heavy-duty #4awg welding quality jumper cables
5. Heavy-duty, nickel plated copper clamps
6. Exclusive, quick-release, spring-loaded
clamp holsters
7. 120 volt AC/DC charging adapter cord
8. 12 volt DC/DC charging adapter cord
9. Built-in emergency worklight
10. Light on/off switch
Fixed Clamp
Cover
Clamp Holster
Shoulder
SLIDE DOWN AND ROTATE CLAMP
OUTWARD FROM BACK OF
UNIT TO REMOVE
12 volt DC
Charging Cord
120 volt AC
Adapter/Charger
|