Spt Wa 1310h User Manual

05-03-457 A029-OK.PDF  
Instruction Manual  
P O R T A B L E  
Air Conditioner  
Sales: 800-934-9194  
Model No. WA-1300E Model No. WA-1310E  
Model No. WA-1300H Model No. WA-1310H  
It is important that you read these  
instructions before using your new  
purchase and we strongly  
[
recommend that you keep them in a  
safe place for future reference.  
05-03-457 A029-OK.PDF  
THANK YOU  
Thank you for choosing the portable air conditioner from SPTUSA, a leading  
brand in indoor air treatment. We would like you to enjoy the many benefits  
this unit offers, so please take the time to read this manual carefully and take  
full advantage of the many advanced features that your SPTUSA Air  
Conditioner offers you.  
SPTUSA specialize in complete indoor environment control, manufacturing  
world-class air conditioners, dehumidifiers and air purifiers with innovative  
technology.  
In designing these advanced products, we have listened carefully to our  
customers and have passed their views onto our research and development  
laboratories.  
We wish you many years of enjoyable use.  
After reading this manual, please keep it in a safe place for future reference.  
Energy Saving Tips  
Please use the unit in the recommended room size. (Refer to PAGE 3).  
Do not locate the air conditioner where furniture or other objects can  
obstruct the airflow.  
Keep blinds/curtains closed during the sunniest part of the day.  
Close fireplace damper and floor or wall grills so that cool air does not  
escape through the chimney or ductwork.  
Keep filters clean.  
Set the unit to maximum cooling and high-speed fan initially, then adjust the  
unit to a comfortable setting.  
NOTE: It is recommended to turn on the air conditioner when the room  
temperature is around 75˚F. Do not wait until the room is excessively hot.  
2
05-03-457 A029-OK.PDF  
SPECIFICATION  
WA-1300E  
WA-1310E  
WA-1300H  
WA-1310H  
Model no.  
Cooling capacity  
Heating capacity  
13000 BTU/hr  
13000 BTU/hr  
13000 BTU/hr  
-
Power/Ampere  
consumption for cooling*  
1071W/ 9.4A  
1071W/ 9.4A  
Power/Ampere  
-
1071W/ 9.4A  
consumption for heating*  
Air volume (max. speed)  
Humidity removal capacity  
Recommended room size  
Power supply  
580m3/h  
98 Pts/day  
420sq.ft.  
580m3/h  
98 Pts/day  
420sq.ft.  
115V/60Hz/1phase  
Compressor  
Refrigerant  
Rotary  
R-22  
Refrigerant load*  
Fan speed  
15.2 oz  
3
Timer  
1~ 24 hours  
Cooling: 64.4o F~ 110o F  
Heating: 41o F~ 80.6o F  
62 o F ~ 90 o F  
5 in x 59 in  
Working temperature  
Thermostat  
Exhaust pipe  
Net Weight  
Dimension  
86 lbs.  
14 x 21 x 30 in (WxDxH)  
REMARK:  
1. The data marked with '*' may vary for technical reasons.  
2. Measuring condition for above is: Cooling – RT80.6 oF, RH60%  
Heating – RT68 oF, RH60%  
*RT means room temperature  
*RH means room humidity.  
Un-insulated rooms such as sunrooms, garages, or attics should be less  
than 420sq.ft.  
The following may effect the unit in reaching your set tempearature:  
Outside Temperature, Room Size, Ceiling Height, Room Insulation,  
Number of people in the room, Direct Sunlight and Source of Heat.  
3
05-03-457 A029-OK.PDF  
BEFORE USE  
Important!  
Transport the unit in an upright position only or leave in upright position  
for at least 2 hours before use. Keep at least 20 inches away from the  
wall. (Figure 1 & 4)  
Always place the unit on an even surface.  
Make sure the unit is connected to a correctly grounded power supply  
(refer to the rating label located at the back of the unit).  
FIG. 1  
An opening in a window or wall is required to accommodate the  
exhaust hose (kit supplied) to expel the warm air.  
Do not cover or obstruct the appliance inlet or outlet grilles (Figure2).  
To avoid the risk of shock, the product should never be used in  
bathrooms, shower rooms or in any other steamy/wet areas (Figure 3).  
The unit will cool when the room temperature is between 64°F and  
110°F depending on the thermostat setting.  
FIG. 2  
Do not sit or place objects on the unit.  
Do not touch the unit with wet/damp hands or when standing barefoot.  
Avoid all contact with chemical based materials.  
The filter must be used with the product at all times. When removing for  
cleaning, always disconnect the power first.  
Turn off the appliance when not in use.  
For storage, drain all water and clean the unit / filters before storage.  
FIG. 3  
Drainage of the water container is required before moving the unit or  
putting it into storage.  
If the electric socket is different from the plug provided, have a qualified  
electrician replace the plug with a suitable one. Avoid the use of  
adaptors, multiple sockets and/or extension cords; if their use is  
necessary, ensure that they conform to the current safety regulations.  
Do not pull the power cord or place it near a source of heat; always  
unroll it completely to avoid the possibility of dangerous overheating.  
If the power cord is damaged, it must be replaced by a service agent or  
20"  
a similarly qualified person.  
THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE  
ABOVE INSTRUCTIONS ARE NOT FOLLOWED.  
20"  
FIG. 4  
4
05-03-457 A029-OK.PDF  
PARTS  
Front  
Back  
FIG. 5  
FIG.6  
1. Control Panel  
2. Air outlet  
5. Air filter  
6. Air inlet  
3. Carrying handle  
4. Caster  
7. Exhaust air outlet  
8. Water stopper / drainage point  
9. Cord storage  
Accessories  
10. Inward adaptor - for insertion over hose  
and connect to back of the air conditioner.  
11. Round connector - for insertion over hose  
and into foam strip (or into hole in the  
wall/window).  
ꢀꢅ  
ꢀꢀ  
ꢀꢆ  
12. Exhaust hose:  
ꢀꢂ  
ꢀꢃ  
Length: 14”-60”  
ꢀꢁ  
Diameter: 4.75”  
13. Round cap for to cover round connector  
when unit not in use.  
14. Foam strip - for filling the open window  
space, with opening for inserting the hose  
& round connector. 7” x 24” x .75”  
15. Foam strip - for filling the open window  
space: 7” x 24” x .75”  
ꢀꢈ  
ꢀꢇ  
ꢀꢉ  
16. Drain tube for continuous drainage  
17. Active carbon filter  
18. Remote control  
19. Water tray  
FIG. 7  
19  
5
05-03-457 A029-OK.PDF  
INSTALLATION  
EXHAUST PIPE INSTALLATION  
The unit is a portable air conditioner that may be moved from room to room.  
1. Using the foam strips / Window installation  
Used to cover the window gap and can be cut to size if necessary.  
Foam strips  
FIG.8  
Attach hose to unit and insert other end through the foam strip.  
Attach Round Connector (part 11) by turning clock-wise.  
Insert strip into window gap as shown and slide window across so that foam is held  
securely. This technique may also be used for sash windows. Note: Take care to  
maintain protection against intruders.  
The best distance between the machine and window or wall is 31~39 inches.  
2. Using the adaptor / Wall installation  
FIG.9  
Wall or Window  
Round connector  
FIG.10  
Cut a 5” diameter hole in the wall or window.  
Attach hose to unit and insert other end through the wall (or window).  
Attach Round Connector (part 11) from the outside.  
You may secure the Round connector to the wall by using small screws (not included)  
through the holes.  
When not in use, cover the opening with the cover provided.  
6
05-03-457 A029-OK.PDF  
Mounting of the exhaust pipe  
Use only the hose provided. Attach  
hose to back of unit by connecting  
the adaptor.  
Avoid kinks and sharp bends in the  
exhaust hose as this will cause  
expelled moist air to build up and  
the unit will overheat and shut  
down. Fig 11 & 12 shows correct  
position  
FIG.11  
The hose may be extended from 12  
inches to 59 inches but for  
maximum efficiency use the  
shortest length possible.  
FIG.12  
FIG.13  
WARNING!  
The length of the exhaust pipe is specially  
designed according to the specification of  
this product. Do not replace or prolong it  
with your own private hose as this could  
cause the unit to mal-function.  
FIG. 14  
7
05-03-457 A029-OK.PDF  
Installing the Carbon Filter  
1. Remove the filter frame from the  
unit.  
2. Unclip and remove one side of the  
frame.  
3. Remove the active carbon filter  
from its plastic bag.  
4. Insert the active carbon filter into  
the filter frame.  
5. Replace the other half of the  
frame.  
6. Re-insert the filter frame inside the  
unit.  
7. It is recommended to replace the  
carbon filter every 3 to 6 months.  
Replacement Filter:  
FIG. 15  
To purchase Replacement  
Filters for this unit, contact  
SPTusa at 1-800-330-0388 and  
request model number WA-  
1300F.  
FIG. 16  
8
05-03-457 A029-OK.PDF  
OPERATION  
Control panel  
ꢀꢊ  
ꢀꢃ  
ꢀꢉ  
ꢄꢋ  
ꢀꢈ  
ꢄꢀ  
ꢀꢇ  
ꢄꢄ  
ꢀꢆ  
$872  
21ꢁ2))  
&22/  
)$1  
/R  
+,  
'2:1  
7,0(5  
83  
0,  
57  
ꢃ7  
+($7  
6/((3  
:ꢂ)ꢂ  
89 ,21  
ꢀꢅ  
ꢀꢄ  
ꢀꢀ  
ꢀꢋ  
FIG.17  
1. Automatic mode indicator  
2. Cooling mode indicator  
3. Fan mode indicator  
14. UV-Tio2/Ionizer switch (only for models  
with UV-Tio2 or Ionizer function)  
15. Sleep function button  
4. Heating mode indicator (for cool & heat  
models only).  
16. “Temperature up” button  
17. “Temperature down” button  
18. LCD display  
19. ON/OFF (power) button  
20. Timer  
21. Speed (ventilation) button  
22. Mode (function) option button  
23. Receiver for remote control (see below)  
5. Low ventilation indicator  
6. Medium ventilation indicator  
7. High ventilation indicator  
8. Timer operation indicator  
9. “Room temperature” indicator  
10. “Water Full” indicator  
11. “Set temperature” indicator  
12. Sleep function indicator  
13. Indicator for UV-Tio2 or Ionizer function (only  
for models with UV-Tio2 / Ionizer function)  
23  
Turning ON/OFF  
1.  
Press ON/OFF button, the unit will start in AUTO mode (only when the unit is plugged in  
first time). If the ambient temperature is  
higher than 75oF, the unit will work in cooling mode.  
higher than 68oF but below or equal to 75oF, the unit will work in ventilation mode.  
below 68oF, the unit will work in heating mode (this is for cooling & heating models only).  
** To by-pass this default setting, press mode to select COOL or HEAT mode.  
Indicators of the functions in progress come on at the same time, e.g. Cool and Lo=Cooling  
mode with Low fan speed. *NOTE! The display window shows the ambient room  
temperature from 32oF to 122oF.  
2.  
3.  
4.  
To turn the unit off, press ON/OFF button again.  
When turning the unit back on, the unit will return to your last setting.  
Setting mode/function  
Press MODE button to select required working mode: automatic, cooling, fan or heating, (Heating  
is only available for heating & cooling models.)  
The indicator of your selected mode comes on.  
9
05-03-457 A029-OK.PDF  
Auto Mode  
When this mode is selected, the unit is preset to the following temperature settings and unit will  
only start to:  
Cool when room temperature is higher than 75°F  
Heat when room temperature is lower than 68°F  
(WA-1300H &WA-1310H models only)  
If room temperature is between 68°F and 75°F, unit will stay in Fan mode. Again, when in Auto  
Mode, the temperature settings cannot be changed.  
Setting temperature  
The pre-setting temperature of this machine is: 75oF for cooling, 68oF for heating.  
Setting the Temperature in Cooling or Heating Mode  
The display window’s default is to display the ambient room temperature and green indicator  
light under RT is on. (RT = Room Temperature)  
To set your desired temperature, press the Temperature up or down button (ranging from  
62°F to 90°F). Each press will increase or decrease your set temperature by 1°F. When  
pressing the temperature up or down button, the window will change to display your set  
temperature. At this time, the green indicator will light under ST (Set Temperature). Once the  
temperature up or down button is released, the window will return to displaying the ambient  
temperature after a second.  
Note: When unit is in the following modes: Cool, or Heat - the compressor will cool/heat the  
room to reach the set temperature. Once the ambient temperature has reached the set  
temperature, the compressor will stop and unit will run in Fan mode. In Cooling or Heating mode,  
it will wait for a 2°F as an allowance to conserve energy. For example:  
In Cooling Mode with a set temperature of 70°F  
When compressor first stops after reaching 68°F, unit will auto-switch to Fan.  
Compressor will start cooling again when ambient temperature increases to 72°F or above.  
In Heating Mode with a set temperature of 72°F  
When compressor first stops after reaching 74°F, unit will auto-switch to Fan. Compressor will  
start heating again when ambient temperature drops to 70°F or below.  
10  
05-03-457 A029-OK.PDF  
Setting ventilation speed  
1.  
Press SPEED button to choose the desired ventilation speed: High, Medium or Low. The  
indicator respective speed will light on at the same time.  
2.  
If the unit is in AUTO mode, it will choose the ventilation speed automatically according to  
the ambient temperature (the related indicators will light on), at this time, this button is  
invalid.  
Setting timer  
1.  
Pressing the TIMER button while unit is operating will set desired operating hours (1 to 24  
hours, the timer indicator will light on). When the set time has been reached, the machine  
will turn off automatically. The display window will show the hour(s) you set as you press the  
TIMER button. If the timer button is not pressed, unit will work continuously.  
2.  
Pressing the TIMER button while unit is off will PRE-SET the time for the machine to start  
working. For example, if you press the timer to '2', the unit will start operating automatically  
after 2 hours.  
Sleep function  
1.  
By selecting the SLEEP button in cooling mode, the set temperature will increase 2oF  
automatically after the 1st hour, and another 2oF after the 2nd hour, then keeps at that  
temperature.  
2.  
By selecting the SLEEP button in heating model, the set temperature will decrease 2oF  
automatically after the 1st hour, and another 2oF after the 2nd hour, then keeps at that  
temperature.  
3.  
4.  
5.  
Re-press the SLEEP button, the setting temperature will return to your set temperature.  
The unit will shut down automatically after running in SLEEP mode for 12 hours.  
Auto mode will not work in this function.  
UV-TiO2 / Ionizer function  
(This is only for model with UV or Ionizer function)  
1.  
2.  
To start the UV or Ionizer button, press UV/Ionizer button.  
Unit will start to clean the air and improve air quality.  
UV-TiO2: Oxidization and decompose viruses, organic materials, odor and bacteria.  
Ionizer: Negative Ionizer creates negative ions, and neutralize with the positive ions in the air.  
Memory IC function  
This unit is incorporated with a Memory IC. If the power is cut and then resumes, unit will  
automatically restart in your previous setting. Please allow 3~5 minutes for the compressor to  
regain function.  
All the above functions can also be performed with the supplied remote  
control (see fig.18).  
This remote control requires 2pcs AAA batteries to operate  
FIG. 18  
11  
05-03-457 A029-OK.PDF  
Regulating air flow direction  
Adjust louver on the air vent horizontally to  
control air flow direction.  
FIG. 19  
NOTICE !  
The compressor will start approximately 3 minutes after the compressor is turned off (this  
will help prolong the life of the compressor). After switching the unit off, please wait at  
least 3 minutes before turning the unit back on.  
The cooling system will switch off if the room temperature is 1ºF lower than set. The fan,  
however, keeps working at the set level. If the ambient temperature rises above the chosen  
level +2ºF, cooling will resume.  
In heating mode, the compressor will switch off if the room temperature is 1ºF HIGHER than  
the one set. As the room temperature drops below the chosen temperature –2ºF, heating will  
resume.  
This machine is equipped with an ANTI-FROST function. While using the heating function during  
low temperatures, sometimes the heating will stop for a while to melt the internal frost. When this  
occurs, just wait for heating to resume.  
12  
05-03-457 A029-OK.PDF  
.DRAINAGE  
During the process of cooling or heating, some water will be extracted from the air. Most of this  
water is used to cool the cooling coils and make the unit run more efficiently. This is a feature not  
found in most other portable air conditioners. If the unit is operated in a VERY HUMID  
environment, water will start to collect in the built-in water reservoir. When the water tank  
becomes full, the compressor and fan will stop. The water full indicator (W.F.) will lit to inform you  
to empty the water tank. To resume cooling or heating, please empty water by one of the  
following methods:  
Draining into a Container  
(Use the water tray supplied in the package)  
1. Turn off the unit.  
2. Position the water tray under the drain spout.  
3. Remove the drain knob & rubber plug from the drain  
spout. Water will flow out automatically.  
4. When the container is almost full, replace the  
rubber plug into the drain spout to stop the water.  
Empty the container.  
5. Repeat steps 2, 3 & 4 until water is emptied.  
6. Replace the rubber plug into the drain spout firmly.  
The Full Water indicator should be off now.  
7. Replace the drain knob.  
Water hole  
NOTE  
Do not allow water to drip continuously into the supplied  
tray or other containers while operating, as it may easily  
overflow.  
Rubber plug  
Drain knob  
FIG.20  
If you wish to operate the unit without the need to empty the water tank, please:  
Continuous Drainage  
1. Remove the drain knob and rubber plug  
Rubber plug  
and keep them for future use.  
2. Use Teflon tape to cover threading on spout,  
Drain knob  
making a flat surface for the hose. This will  
prevent leakage.  
3. Connect supplied water tube (or one with  
FIG.21  
3/4” internal diameter) to the spout.  
Condensed water will now flow out this tube  
automatically.  
4. To extend the supplied tube, please connect  
to a tube with a ¾” outside diameter.  
Drain tube  
FIG. 22  
13  
05-03-457 A029-OK.PDF  
Original drain  
Extended  
NOTE  
The drain tube must be at or below the  
outlet level.  
drain tube  
(OD: 3/4in)  
Water Full (full water) indicator will not  
function in this mode of drainage.  
If you wish to extend the water tube, please  
connect with another tube (outside  
diameter 3/4").  
FIG.23  
Special caution for heating function!  
While using the heating function, please note:  
1. Install the exhaust hose to exhaust cool air  
outdoors. (Please refer to page 6 for  
instructions on installing the hose.)  
2. It is recommended to attach drain tube for  
continuous drainage, as water will collect  
much faster in Heating mode.  
3. Working range for heating function is 41ºF to  
80.6ºF (for cooling function, it is 64.4º to  
110ºF). For temperature outside this range,  
the unit may not work properly.  
Drain tube  
FIG.24  
14  
05-03-457 A029-OK.PDF  
.MAINTENANCE  
Always unplug the unit before cleaning and maintenance.  
Cleaning the Housing  
Use a soft, damp cloth to wipe the body clean.  
Never use strong chemicals, oil-based products, detergents, chemically treated cloths  
or other cleaning solutions. These could possibly damage the cabinet.  
Cleaning the Filter  
First remove the black active carbon filter from the frame, tap lightly to remove loose dust  
and dirt. Use a vacuum cleaner or tap the white filter lightly to remove loose dust and dirt.  
Then rinse the white filter thoroughly under running water (no hotter than 104°F). Let dry  
under sun thoroughly before replacing.  
Do not wet the active carbon filter! Remove from frame before washing.  
Notice! Never operate the unit without the filters.  
End of season storage  
Unplug the unit and drain the condensed  
water COMPLETELY (please refer to page  
13). Clean or change the filter.  
On a warm day, turn the unit to fan mode for a  
couple of hours so that the inside can dry out  
completely.  
It is recommended that the unit be put back  
into its original carton for storage.  
Do not stack heavy objects on top of the unit.  
Cord  
Storing The Power Cord  
When the unit is not in use, please store the  
power cord away as shown in Figure 25.  
FIG.25  
15  
05-03-457 A029-OK.PDF  
.TROUBLE SHOOTING  
Is the machine plugged in?  
Is the main power supply on?  
Is room temperature within working  
temp range?  
Is unit set in Auto mode? Select Cool or  
Heat mode and set to proper  
temperature.  
The unit doesn’t run or only runs in fan  
mode  
Is there direct sunlight? Please draw  
curtains and blinds.  
Are there too many windows or doors  
open?  
The unit seems to do little  
Are there too many people in the room?  
Is there something in the room that  
produces a lot of heat?  
Is the dust filter dirty?  
Is the air intake or outlet dirty or  
The unit seems to do nothing  
blocked?  
Is the room temperature below the set  
temperature?  
The room being cooled should have  
proper insulation. If the unit is being  
used in UN-INSULATED rooms such as  
sunrooms, garages, attics or the like,  
ideal cooling may not be attained.  
Is the unit positioned unevenly so as to  
create vibration?  
The room is not cold enough  
Too noisy  
Is the unit placed on stable and even  
ground?  
The overheat protection feature on the  
compressor may be on. If this occurs,  
wait for the temperature of the unit to  
drop.  
Is the water tank full? Does it need  
draining?  
The compressor doesn’t run  
Setting was changed. Please allow 3  
minutes for compressor to resume.  
/ Never try to repair or dismantle the unit yourself  
16  
05-03-457 A029-OK.PDF  
.DEFECTIVE NOTICE  
If this product is defective or not working properly  
Please DO NOT return to your retail store  
Please contact us directly with any Service or Technical Assistance  
Sales: 800-934-9194  
17  
05-03-457 A029-OK.PDF  
Portable Air Conditioner / Heater  
Your Guarantee  
If this product is found to be faulty as a result of faulty materials or  
workmanship within one year from date of purchase, it will be repaired or  
replaced free of charge. This guarantee is subject to the following terms:  
SPTUSA, must be notified of the fault.  
Proof of purchase must be presented to SPTUSA’s nominated representative.  
The warranty will be void if the product is modified, misused or repaired  
by an unauthorized person.  
The guarantee after repair or replacement will not be extended beyond the  
original one year period.  
All replacement parts or units will be new or reconditioned.  
Parts or units, which are replaced, become the property of SPTUSA.  
The warranty applies to the use of this product in the United States.  
Freight charge is not included in the warranty.  
This GUARANTEE is in addition to your Statutory Rights.  
Dear Customer: Please keep this warranty for your record. DO NOT return it.  
18  
05-03-457 A029-OK.PDF  
SAFETY POWER SUPPLY CORD:  
This Portable Air Conditioner is provided with a Leakage Current Detection and  
Interruption circuit (LCDI) built into the plug of the power supply cord.  
This device provides protection to reduce the risk of fire due to arcing faults in the  
power-supply cord. Each time before using the Portable Air Conditioner, follow the  
“plug Testing Instructions” given below to ensure that the LCDI circuit is functioning  
properly.  
PLUG TESTING INSTRUCTIONS:  
1.  
2.  
PRESS TEST BUTTON. UNIT SHOULD TRIP.  
PRESS RESET BUTTON FOR USE.  
Note: Please do not use this item if above test fails.  
The conductors inside this power supply cord are surrounded by shields, which  
monitor the leakage current. These shields are not grounded. Periodically examine  
the cord for any damage. If the shield gets exposed, immediately unplug the power  
supply cord and do not use the Portable Air Conditioner. Do not repair a damaged  
cord. Replace the damaged cord with a new replacement power supply cord or  
obtain a new replacement power supply cord by calling Sunpentown Int’l Inc. at  
1-800-330-0388.  
In the event the LCDI Plug of the power supply cord trips by itself, first examine the  
cord for any damage. If there is no damage to the cord then press the RESET  
button. If the LCDI Plug trips again, then immediately unplug the power supply  
cord. Replace the damaged cord with a new replacement power supply cord or  
obtain a new replacement power supply cord by calling Sunpentown Int’l Inc. at  
1-800-330-0388.  
Do not use the TEST and RESET buttons as an ON/OFF switch. They are only  
meant to periodically check the LCDI plug.  
Sales: 800-934-9194  
19  

Philips Lr03ep2a User Manual
Ricoh Aficio 8080 User Manual
Samsung As18f User Manual
Samsung Uq18a9 0 Rcf User Manual
Schumacher 1015 User Manual
Studer Innotec Top Cover C Ip23 User Manual
Toshiba Ras B13ekvp E User Manual
Trion Air Boss Dc 8 User Manual
York Affinity Bhp024 User Manual
York Yphbc User Manual