Portable Battery Charger - 2400
Quick Installation Guide
Introducing the Portable Battery Charger
ThePortableBatteryCharger-2400easilychargeselectronic
deviceswhileonthego, includingiPhone®/iPod®, mobile
phones, PDAs, portable video games, MP3 players and
more
KeyFeaturesandBenefits
•
High-quality rechargeable Lithium-ion battery
recharges easily via computer systems USB port
(with included USB charging cable)
•
•
Extends talk time up to 6 hours, up to 12 hours of
video, or up to 60 hours of music
IncludesadaptertipsforusewithvariousMotorola,
Samsung, LG, Blackberry®, Palm, Nokia, and more
•
CompatiblewithanyUSB-poweredportabledevice
SystemRequirements
•
Desktop or notebook computer with an available
USB port
AdditionalAdapterTips
Additional adapter tips are available for purchase at
04-0597A
1
LED Indicator
•
•
•
Red: Battery low
Green: Full charge
Orange: Charging
AdapterTips
Motorola/Blackberry/MicroUSB
Motorola/Blackberry/MiniUSB
Nokia
Samsung
LG
Figure 3
Note:Forupdatedlistofcompatiblephonemodels
or to purchase additional adapter tips, visit
3
Operating Instructions
Charging the Battery Using a Computer
1.
ConnecttheMiniUSBportofthesuppliedUSBcable
tothe INPUT(MiniUSBport)ofthePortableBattery
Charger-2400, see Figure 2 below.
2.
Connect the USB type A plug of the supplied USB
charging cable to an available USB port of your
desktop or notebook computer (make sure the
system is turned on). Orange LED will turn on and
thechargingprocesshasbegun, see Figure4 below.
3.
When the orange LED goes off and the green LED
displays, the Portable Battery Charger-2400 is now
fully charged.
Figure 4
4
RechargingYourPortableDevices
When your portable device is out of battery, you can
recharge with the Portable Battery Charger-2400 easily. Just
makesurethePortableBatteryCharger-2400isfullycharged
before proceeding.
1.
Connect the USB type A plug of the supplied USB
chargingcabletotheUSBportOUTPUT(USBport)
of the Portable Battery Charger-2400.
2.
Find the proper adapter tip (included or buy
separately) and connect to the Mini USB port of the
supplied USB charging cable. Then plug it to your
device. See Figure 5 below.
3.
4.
During charging, all LEDs will not display to save
power.
During the charging process if the red LED of the
Portable Battery Charger-2400 starts flashing, this
signals that the battery power runs low. When this
happens, stop charging your device and recharge
the Portable Battery Charger-2400 until it is fully
charged. Then repeat the above steps to complete
the device charging process.
Figure 5
5
Recharging your iPod and iPhone
When your iPod and iPhone is out of battery, you can
recharge it with the Portable Battery Charger-2400 easily.
Just make sure the Portable Battery Charger-2400 is fully
charged before proceeding.
1.
ConnecttheAppleUSB2.0chargingcable(supplied
with iPhone/iPod) to your iPod or iPhone
2.
Connect the USB type A plug of the Apple USB 2.0
charging cable to the OUTPUT (USB port) of the
Portable Battery Charger-2400. See Figure 6 below.
3.
4.
During charging, all LEDs will not display to save
power.
During the charging process if the red LED of the
Portable Battery Charger-2400 starts flashing, this
signals that the battery power runs low. When this
happens, stop charging your iPod or iPhone and
recharge the Portable Battery Charger-2400 until it is
fully charged. Then repeat the above steps to
complete the device charging process.
Figure 6
6
Technical Support and Warranty
QUESTIONS? SIIG’sOnlineSupporthasanswers! Simplyvisitourwebsiteat
with new drivers and solutions. Answers to your questions could be just a few
clicks away. You can also submit questions online and a technical support
analysts will promptly respond.
SIIGoffersa2-yearmanufacturerwarrantywiththisproduct. Pleaseseeourweb
siteformorewarrantydetails. Ifyouencounteranyproblemswiththisproduct,
pleasefollowtheproceduresbelow.
Ifitiswithinthestore'sreturnpolicyperiod,pleasereturntheproducttothestore
whereyoupurchasedfrom. Ifyourpurchasehaspassedthestore'sreturnpolicy
period, pleasefollowthesestepstohavetheproductrepairedorreplaced.
Step 1: Submit your RMA request.
a
request to SIIG RMA. If the product is determined to be
defective, an RMAnumber willbeissued.
Step 2: After obtaining an RMA number, ship the product.
•
Properlypacktheproductforshipping. Allaccessories thatcamewith
theoriginalpackagemustbeincluded.
•
ClearlywriteyourRMAnumberonthetopofthereturnedpackage. SIIG
will refuse to accept any shipping package, and will not be responsible
foraproductreturnedwithoutanRMAnumberpostedontheoutsideof
theshippingcarton.
•
•
You are responsible for the cost of shipping. Ship the product to the
followingaddress:
SIIG,Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA#:
SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
no cost to the customer.
7
About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturerofI/O
connectivityproducts,includingPCI&ISAserialandparallelports,USB,Serial
ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards,
andotheraccessories. SIIGisthepremierone-stopsourceofupgrades.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,
and are backed by an extensive manufacturer warranty. High-quality control
standards are evident by the overall ease of installation and compatibility of
ourproducts, aswellasoneofthelowestdefectivereturnratesintheindustry.
SIIG products can be found in computer retail stores, mail order catalogs,
throughmajordistributors, systemintegrators, andVARsintheAmericasand
theUK,andthroughe-commercesites.
PRODUCT NAME
Portable Battery Charger-2400
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
Portable Battery Charger-2400 is a trademark of SIIG, Inc. SIIG and the SIIG logo are
registeredtrademarksofSIIG,Inc. Othernamesusedinthispublicationareforidentification
only and may be trademarks of their respective companies.
October, 2009
Copyright © 2009 by SIIG, Inc. All rights reserved.
|