™
GP
Silent Air Purifier
Germicidal Protection
SI871 Instructions
INCLUDES IMPORTANT
SAFETY INFORMATION.
READ ALL INSTRUCTIONS
BEFORE USING THIS APPLIANCE.
SAVE THESE INSTRUCTIONS.
Dear Sharper Image Customer,
Thank you for your purchase of a Sharper Image product. We appreciate
your business very much.
Our goal is that you will be completely satisfied with this product’s
quality and performance. We offer generous return privileges and
excellent warranties on all our products.
Since 1977, The Sharper Image has shared the fun of discovering
innovative products that make life better and more enjoyable. We’ve
been in business a long time because we are an exciting place to shop
and — just as importantly — we strive to deliver outstanding customer
service that exceeds your expectations.
Enjoy your purchase!
Call 1-800-344-4444 for ordering and customer service, or visit
, our award-winning Website.
Table of Contents
Warnings ...................................................................................6
Caution .....................................................................................8
Frequently Asked Questions...................................................9
Frequently Asked Questions About OzoneGuard™...............10
General Instructions.................................................................11
Setup and Operation............................................................11
Cleaning the Collection Grid................................................13
Thorough Cleaning...............................................................14
Additional Information.........................................................15
Germicidal Lamp Replacement ............................................16
Statement of FCC Compliance .............................................18
If candles or oil lamps are burned, the collection grid must be
cleaned immediately or the collected soot may be released
back into the room. In any area where this product will be
subjected to heavy pollution it will be necessary to clean the
collection grid more frequently.
Warnings
Warning: To reduce the risk of fire, electric shock or injury when
using any electrical appliance, basic precautions should always be
observed, including the following:
•This appliance operates at 110V AC and 50Hz or 60Hz only.
•Connect to a polarized outlet only.
•Plug is polarized with one blade wider than the other. The plug
is only designed to fit in polarized outlet. Do not attempt to
defeat this safety feature.
•Use indoors only.
•Unplug from outlet when not in use and before servicing.
•Do not allow the appliance to be used as a toy. Close attention
is necessary when the appliance is operated near children.
•Use only as described in this user manual.
•Do not use if cord or plug appears to be damaged. If the
appliance is not working properly, or has been dropped,
damaged, left outdoors or dropped into water, return it to
a service center or to the original place of purchase.
•Do not pull, lift or carry by the power cord. Do not use the cord
as a handle, close a door on the cord, or pull the cord around
6
Warnings
or against sharp edges or corners.
•Keep the cord away from heated surfaces.
•A damaged power cord must be replaced by qualified service
personnel only. There are no user-serviceable parts inside the
unit. Any attempt to open the unit will void the warranty and
could lead to serious damage to the unit and/or personal injury
to the user.
•Before unplugging the unit from the outlet, turn off all
the controls.
•Do not unplug by pulling the cord. Grasp the plug itself, not the
cord, when unplugging from an outlet.
•Do not handle the plug or appliance with wet hands.
•Do not put any object into openings. Do not continue to use
with any opening blocked. Keep all openings free of dust, lint,
hair or anything that may reduce airflow.
•Keep hair, loose clothing, fingers and all parts of the body away
from openings.
•Do not operate the unit in areas where flammable or combus-
tible products or vapors may be present.
READ AND SAVE THESE INSTRUCTIONS
Caution
This product generates invisible ultraviolet light. To avoid overex-
posure when the lamp is on, persons must stay at least one foot
away from the unit if the total duration of exposure to the unit
will be more than 30 minutes per day. Shorter duration of expo-
sure at close proximity is safe. If the enclosure is damaged, do not
use the product.
Never stare at the UV-C lamp or place your face directly against
the front or rear grill during operation.
Failure to follow these warnings can result in direct exposure to
germicidal light, which can cause temporary or chronic damage
to your eyesight, or may even result in blindness.
The collection grid has many edges and areas that can trap water.
If running water is used to clean the grid, allow the collection grid
to dry completely.
8
Frequently Asked Questions
How often is cleaning required?
At least every two weeks, anytime The Sharper Image® GP™
Silent Air Purifier makes an audible sound or the Cleaning
Overdue indicator illuminates.
How should it be cleaned?
Wipe the removable collection grid with a damp cloth, paper
towel or sponge. It is very important that the collection grid is
completely dry before returning it to the main housing.
What is the clean fresh scent I smell?
The scent is ozone, (O3), a combination of three oxygen atoms.
(The U.S. government has set safe standards for ozone and
Sharper Image® Silent Air Purifiers comply with those standards.)
Which power setting should I use?
If the odor of ozone is strong (for instance in a smaller room),
you may prefer to have the power setting on medium or low.
Please read this product instruction manual for impor-
tant safety information and operating instructions.
9
Frequently Asked Questions About OzoneGuard™
What does OzoneGuard™ do?
With the OzoneGuard in place, a significant portion of ground-
level ozone inside the air purifier — including any trace levels of
ozone by-product — is converted into oxygen before the cleaned
air circulates back into the room.
Why is the OzoneGuard™ smaller than the grill itself?
The majority of the air output is directed toward the center of the
grill and therefore a larger OzoneGuard isn’t necessary.
Please read this product instruction manual for impor-
tant safety information and operating instructions.
10
General Instructions
Setup and Operation
Place The Sharper Image GP at
least twelve inches from the wall
and in a location where children
cannot stare directly into the unit
at a close range.
Blue Glow
coming from
within the
unit indicates
that the
germicidal
lamp is
12"
Plug into a polarized 110V outlet.
(Read Warnings for details.)
operating.
Switch the POWER CONTROL to
the desired setting:
Power
ON: The unit will clean and circulate
the air but the germicidal lamp is not
activated.
Control
ON/GP: Air is also passed through the
UV-C light produced by a germicidal lamp.
11
Setup and Operation
Switch the MODE CONTROL to the
desired setting:
LOW: For small rooms or rooms
where the door is usually closed.
Mode
Control
MEDIUM: For average-sized rooms.
HIGH: For large rooms and higher
traffic areas.
To override the MODE CONTROL
setting and to run the unit at maximum
power for five minutes, press BOOST.
Boost
Your previously selected power level
resumes after the five minutes.
12
Cleaning the Collection Grid
This model features 3 highly charged collection blades separated
by 2 oppositely charged “driver” blades. This improves the
particle capture rate.
Clean the grid every one or two weeks. As a reminder, the
Cleaning Overdue indicator turns amber after two weeks. If the
Cleaning Overdue indicator turns red, the unit has shut down
because of excessive dirt or circuitry problems. In most cases,
a thorough cleaning returns the unit to normal operation.
1. Before cleaning,
unplug the unit.
2. Remove the collection grid
by releasing the latch and
pulling the grid from the top
of the unit.
Collection Grid
Release-Latch
13
Cleaning the Collection Grid
3. Use a dry or slightly damp
towel or sponge to quickly
wipe the dust from each of
the three collection bars.
4. Before replacing the grid,
invert the entire unit two
or three times.
Note: The grid may also be
washed with warm soapy water, then rinsed.
If this method is used, allow 24 hours for the
grid to completely dry before reinserting it into
the main housing.
Thorough Cleaning
If the unit makes noise during operation, a thorough cleaning of
the grid, back grill and OzoneGuard front grill may be required.
1. Before cleaning, unplug the unit.
2. Release the grills by lifting the blue RELEASE-TABS on the
bottom of the grills. Slide up to remove.
14
Thorough Cleaning
3. Use a hair dryer to blow dust
from the interior or a vacuum
to remove dust.
Note: The OzoneGuard cannot
be detached from the front grill.
The OzoneGuard has sharp edges;
use caution when cleaning.
CAUTION: Do not use the product if
the ionizing wires are broken or either
grill appears damaged.
Release-Tab
Additional Information
The exterior of the unit can be cleaned using a cloth or sponge
and a solution of one part household bleach to five parts water
or any bleach-based spray cleaner.
Before plugging the unit back into an outlet, allow the surface to
dry completely.
The unit will not function while the collection grid is removed or
either of the grills are removed.
15
Additional Information
The majority of collected particles will gather on the removable
stainless steel grid. Over time, debris will accumulate inside the
unit. To access the inside, remove the front and rear grills.
(See section titled “Thorough Cleaning.”)
Sharper Image® Silent Air Purifiers comply with current U.S.
safety requirements for low ozone emissions for consumer
products. We recommend that individuals with a history of
respiratory disease consult with their doctor about possible
heightened sensitivity to very low ozone.
Germicidal Lamp Replacement
To order replacement lamps directly from The Sharper Image,
call 1-800-344-5555 and order item number SI922.
Lamps are effective for about 12 months of continuous use. To
maintain maximum performance, the lamp should be wiped free
of particles every three months.
16
Germicidal Lamp Replacement
Oil from fingers will reduce the germicidal performance of the
UV-C lamp. If possible, use gloves or handle only by the metal
area of the lamp. Otherwise, clean the lamp after installing to
remove fingerprints and oils.
To clean: Wipe the lamp, using a paper towel lightly dampened
with rubbing alcohol or an ammonia-based cleaner (such as
Windex brand).
1. Remove the cover by lifting up on
the RELEASE-TAB at the bottom of
the cover and sliding the cover up.
2. Turn the lamp 1/4 turn (two “clicks”)
and slide it from its fixture. Replace
with a new one of the same type.
3. Dispose of used fluorescent lamps in
accordance with local regulations.
Release-Tab
17
Statement of FCC Compliance — Model SI871
WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
18
Statement of FCC Compliance — Model SI871
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician
for assistance.
19
One-Year Warranty
What Is Covered
This warranty covers any defects in materials or workmanship, with the exceptions stated below.
How Long Coverage Lasts
This warranty runs for one year from the date of original purchase.
What Is Not Covered
This warranty does not cover damage caused by misuse or use other than as intended and described
in the product instruction manual, or loss or damage to batteries or removable parts.
What The Sharper Image Will Do
The Sharper Image warrants this product against defects in materials and workmanship. When repair
is not practical, The Sharper Image will have the option to replace the defective product with a fully
warranted, factory-reconditioned product that is the same or has similar functionality.
How to Obtain Service
Return the product and receipt, along with a brief explanation of the problem, to:
T.S.I. - Returns Department
2901-A West 60th Street
Little Rock, AR 72209
If you have questions please feel free to contact our customer service representatives at 1-800-344-5555
or by email at [email protected].
This warranty gives you specific legal rights, and you may have other legal rights that vary from state to state.
© 2004, 2005, 2006 Sharper Image Corporation
Sharper Image Corporation
350 The Embarcadero, Sixth Floor
San Francisco, CA 94105-1218
Shop online:
Actual product may differ slightly from the product described herein.
V2 11/06
|