Sanyo Lithium Polymer
Rechargeable Batteries
SEB-014
Lith iu m Po ly m e r
Charge Characteristics
Discharge Rate Characteristics
●●
●●
Charge : CC-CV 500mA-4.2V (It/20 cut off)
Charge : CC-CV 500mA-4.2V (It/20 cut off) Temp.:20oC
Discharge : CC 500mA (x0.2, x1, x2) (2.75V cut off) Temp.:20oC
4.5
1000
800
600
400
200
UPF 323456L
Cell Voltage
UPF 323456L
4.0
3.5
3.0
2.5
800
600
400
200
4.0
0.2It
3.5
3.0
2.5
2.0
Capacity
1
It
2
It
Current
0
0
30
60
90
120
150
0
100
200
300
400
500
600
Charge Time / min
Discharge Capacity / mAh
Cycle Characteristics
Discharge Temperature Characteristics
●●
●●
Charge : CC-CV 500mA-4.2V (It/20 cut off)
Discharge : CC 500mA (2.75V cut off)
Charge : CC-CV 500mA-4.2V (It/20 cut off)
Discharge : CC 500mA (2.75V cut off) Temp.:20oC
600
500
400
300
200
100
0
UPF 323456L
UPF 323456L
4.0
3.5
60℃
25℃
0℃
3.0
-10℃
-20℃
2.5
0
100
200
300
400
500
600
0
100
200
300
400
500
Discharge Capacity / mAh
Cycle Number / -
Ratings
●●
Volumetric Energy Density
Wh / I
Gravimetric Energy Density
Wh / kg
Model
Number
Nominal
Nominal
Size*2(H×W×L) / mm
Weight / g
Energy /
Wh
Voltage / V Capacity*1/ mAh
1: Discharge:0.2ItA(E.V.=2.75V)/Min.
*
2: The maximum thickness of the standard shipment charging condition.
*
Applications
●●
●Cellular phone ●PHS ●PDA ●Notebook computer ●Personal transceivers ●Handy terminal ●Camcorder
●Digital camera ●Head set stereo ●CD player ●Mini Disc player etc.
L Type Cell (PCB*-less type)
●●
The batteries attached “L” at their suffix are high safety models which are used our original
super-efficient Manganese in the positive electrode. As they can prevent the unsafe situation at
the over-charging, these cells can be attached to equipments without PCB.
However, they are recommended to assemble protection devices or to install measures in order
to protect from the over-current and the over-discharge mode when they are used without PCB.
*: Protection Circuit Board
Lithium Polymer Battery Handling Precautions
Danger
1 Do not disassemble or modify the battery pack. The battery pack is equipped with
built-in safety/protection features. Should these features be disabled, the battery
pack can damage, overheat, emit smoke, burst and/or ignite.
When subjected to large voltage, overcurrent can flow on the battery pack,
possibly leading to damage, overheating, smoke emission, bursting and/or ignition.
15 Do not use the battery pack for a purpose other than those specified. Otherwise, its
guaranteed performance will be lost and/or its service life will be shortened.
Depending on the equipment in which the battery pack is used, excessively high
current can flow through battery pack, possibly damaging it and leading to
damage, overheating, smoke emission, bursting and/or ignition.
2 Do not connect the positive (+) and negative (– ) terminals with a metal object such
as wire. Do not transport or store the battery pack together with metal objects such
as necklaces, hair pins, etc. Otherwise, short-circuiting will occur, overcurrent will
flow, causing the battery pack to damage, overheat, emit smoke, burst and/or
ignite, or the metal object such as wire, necklace or hair pin can generate heat.
16 If the battery pack damages, and the electrolyte gets into the eyes, do not rub
them, instead, rinse eyes with clean running water and immediately seek medical
attention. Otherwise, eye injury may result.
3 Do not discard the battery pack into fire or heat it. Otherwise, its insulation can
melt down, safety features will be damaged and/or its electrolyte can ignite,
possibly leading to damage, overheating, smoke emission, bursting and/or ignition
on it.
Warning
4 Do not use or leave the battery pack near a heat source such as fire or heater
(80°C or higher). If the resin separator should be damaged owing to overheating,
internal short-circuiting may occur to the battery pack, possibly leading to damage,
overheating, smoke emission, bursting and/or ignition of the battery pack.
1 Do not use the battery pack in combination with primary battery packs (such as
dry-cell battery packs) or battery packs of different capacities or brands.
Otherwise, the battery pack can be overdischarged during use or overcharged
during recharging, abnormal chemical reactions may occur, possibly leading to
damage, overheating, smoke emission, bursting and/or ignition.
5 Do not immerse the battery pack in water or seawater, and do not allow it to get
wet. Otherwise, the protective features in it can be damaged, it can be charged
with extremely high current and voltage, abnormal chemical reactions may occur in
it, possibly leading to damage, overheating, smoke emission, bursting and/or
ignition.
2 If recharging operation fails to complete even when a specified recharging time
has elapsed, immediately stop further recharging. Otherwise, damage,
overheating, smoke emission, bursting and/or ignition can occur.
3 Do not put the battery pack into a microwave oven or pressurized container. Rapid
heating or disrupted sealing can lead to damage, overheating, smoke emission,
bursting and/or ignition.
6 Do not recharge the battery pack near fire or in extremely hot weather. Otherwise,
hot temperatures can trigger its built-in protective features, inhibiting recharging, or
can damage the built-in protective features, causing it to be charged with an
extremely high current and voltage, and, as a result, abnormal chemical reactions
can occur in it, possibly leading to damage, overheating, smoke emission, bursting
and/or ignition.
4 If the battery pack damages or gives off a bad odor, remove it from any exposed
flame. Otherwise, the electrolyte may catch fire, and the battery pack may emit
smoke, burst or ignite.
5 If the battery pack gives off an odor, generates heat, becomes discolored or
deformed, or in any way appears abnormal during use, recharging or storage,
immediately remove it from the equipment or battery pack charger and stop using
it. Otherwise, the problematic battery pack can develop damage, overheating,
smoke emission, bursting and/or ignition.
7 To recharge the battery pack, use the battery charger specifically designed for the
purpose and observe the recharging conditions specified by SANYO. A recharging
operation under non-conforming recharging conditions (higher temperature and
larger voltage/current than specified, modified battery charger, etc.) can cause the
battery pack to be overcharged, or charged with extremely high current, abnormal
chemical reaction can occur in it, possibly leading to damage, overheating, smoke
emission, bursting and/or ignition.
8 Do not pierce the battery pack with a nail or other sharp objects, strike it with a
hammer, or step on it. Otherwise, the battery pack will become damaged and
deformed, internal short-circuiting can occur, possibly leading to damage,
overheating, smoke emission, bursting and/or ignition.
Caution
1 Do not use or subject the battery pack to intense sunlight or hot temperatures such
as in a car in hot weather. Otherwise, damage, overheating and/or smoke
emission can occur. Also, its guaranteed performance will be lost and/or its service
life will be shortened.
9 Do not strike or throw the battery pack. The impact might cause damage,
overheating, smoke emission, bursting and /or ignition.And also if the protective
feature in it may become damaged, it will be charged with extremely high current
and voltage, abnormal chemical reactions can occur, possibly leading to damage,
overheating, smoke emission, bursting and /or ignition.
2 The battery pack incorporates built-in safety devices. Do not use it in a location
where static electricity (greater than the manufacturer’ s guarantee) may be
present. Otherwise, the safety devices can be damaged, possibly leading to
damage, overheating, smoke emission, bursting and/or ignition.
10 Do not use an apparently damaged or deformed battery pack. Otherwise, damage,
overheating, smoke emission, bursting and/or ignition of the battery pack may
occur.
3 The guaranteed recharging temperature range is 0 ~ 40°C. A recharging operation
outside this temperature range can lead to damage and/or overheating of the
battery pack, and may cause damage to it.
11 Do not directly solder the battery pack. Otherwise, heat can melt down its
insulation, damage its gas release vent or safety features possibly leading to
damage, overheating, smoke emission, bursting and/or ignition.
4 If electrolyte from the battery pack contacts your skin or clothing, immediately
wash it away with running water. Otherwise, skin inflammation can occur.
12 Do not reverse the positive (+) and negative (– ) terminals. Otherwise, during
recharging, the battery pack will be reverse-charged, abnormal chemical reactions
then may occur, or excessively high current can flow during discharging possibly
leading to damage, overheating, smoke emission, bursting and/or ignition.
5 Store the battery pack in a location where children cannot reach it. Also, make
sure that a child does not take out the battery pack from the battery pack charger
or equipment.
6 Before use, carefully study the Operation Manual and Precautions. For further
information, contact a nearest SANYO distributor or representative. Safekeep the
manual for future reference.
13 The positive (+) and negative (– ) terminals are arranged in a particular orientation.
Do not force the connection if you cannot easily connect the battery pack terminals
to the battery pack charger or other equipment. Confirm that the terminals are
correctly oriented. Reversing the terminals will result in reverse-charging, possibly
leading to damage, overheating, smoke emission, bursting and/or ignition of the
battery pack.
7 For recharging procedures, refer to the Operation Manual of your battery pack
charger.
8 If you find rust, a bad odor, overheating and/or other irregularities when using the
battery pack for the first time, return it to your supplier or vendor.
14 Do not connect the battery pack to an electrical outlet, vehicle cigarette lighter, etc.
USA
CANADA
ASIA
SANYO Energy (USA) Corporation
SANYO Canada Inc.
TEL : (+1) 416-421-8344
FAX : (+1) 416-421-8827
SANYO Energy (HK) Company Ltd.
TEL : (+852) 2301-2213
•
•
•
•
•
•
•
•
•
•
TEL : (+1) 619-661-6620
FAX : (+1) 619-661-6743
New Jersey Office
TEL : (+1) 201-843-7200
FAX : (+1) 201-843-3870
Chicago Office
TEL : (+1) 630-285-0333
FAX : (+1) 630-285-1133
Florida Office
TEL : (+1) 352-376-6711
FAX : (+1) 352-376-6772
Atlanta Office
TEL : (+1) 770-476-4558
FAX : (+1) 770-476-7558
Dallas Office
TEL : (+1) 972-398-0307
FAX : (+1) 972-398-8477
FAX : (+852) 2301-2191
SANYO Energy (Taiwan) Co., Ltd.
TEL : (+886) 2-2522-1311
FAX : (+886) 2-2543-4659
SANYO Energy (Singapore)
Corporation Pte., Ltd.
EUROPE
SANYO Energy (Europe) Corporate
GmbH
TEL : (+49) 89-4600950
FAX : (+49) 89-460095190
Scandinavia Representative Office
TEL : (+45) 33-27-09-10
FAX : (+45) 33-27-04-44
Italy Representative Office
TEL : (+39) 2-55180490
FAX : (+39) 2-55180502
•
SANYO Electric Co., Ltd.
<Soft Energy Company>
<Factory. Sales>
Sumoto-city, Hyogo, Japan
TEL : (+81)799-24-4111
FAX : (+81)799-24-4123
TEL : (+65) 6736-3100
FAX : (+65) 6736-1230
•
AUSTRALIA
SANYO Australia Pty., Ltd.
TEL : (+61) 2-8825-2822
FAX : (+61) 2-9678-9381
•
•
France Representative Office
TEL : (+33) 1-4131-8484
FAX : (+33) 1-4131-8485
•
SANYO Energy (UK) Company Ltd.
TEL : (+44) 1442-213121
FAX : (+44) 1442-212021
•
For more detailed information, contact the above:
•
This brochure was printed on recycle paper.
Printed in Japan 2002.10.10,000
|