Samsung Sh24tp6 User Manual

OWNERS INSTRUCTIONS  
MANUAL DE INSTRUCCIONES  
MANUEL DUTILISATION  
ISTRUZIONI PER LUSO  
MANUAL DE INSTRUÇÕES  
GEBRAUCHSANWEISUNG  
O¢H°IE™  
Indoor unit  
Outdoor unit  
AQ07P8GE  
AQ07PBGE  
SH07ZPG  
UQ07P8GE  
UQ07PBGE  
SH07ZPGX  
SH07ZPGAX  
UQ09P8GE  
UQ09PBGE  
SH09ZPGX  
SH09ZPGAX  
UQ12PBGE  
UQ12PGGB  
UQ12PGGE  
SH12ZPGX  
SH12ZPGAX  
UQ18P0GB  
UQ18P0GE  
SH18ZP0X  
SH18ZP0AX  
UQ24P6GB  
UQT24P6GE  
SH24TP6X  
SH24TP6AX  
SH07ZPGA  
AQ09P8GE  
AQ09PBGE  
SH09ZPG  
SH09ZPGA  
AQ12PBGE  
AQ12PGGB  
AQ12PGGE  
SH12ZPG  
SH12ZPGA  
AQ18P0GB  
AQ18P0GE  
SH18ZP0  
SH18ZP0A  
AQ24P6GB  
AQT24P6GE  
SH24TP6  
SH24TP6A  
Split-type Room Air Conditioner (Cool and Heat)  
Aire acondicionado doméstico sistema Split (Refrigeración y Calefacción)  
Climatiseur de type Séparé (Refroidissement et Chauffage)  
Condizionatore daria per ambienti ad unità Separate (Raffreddamento e Riscaldamento)  
Aparelho de ar condicionado tipo Split (Refrigeração e Aquecimento)  
Geteilte raumklimaanlage (Kühlen und Wärmen)  
¢IAIPOYMENO K§IMATI™TIKO ¢øMATIOY(æ‡Í˘ Î·È £¤ÚÌ·ÓÛ˘)  
E S F I P D G DB98-08672A(6)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . .  
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . .  
2
4
6
7
8
OPERATING YOUR AIR CONDITIONER  
Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . . . .  
9
Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Heating Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Changing the Room Temperature Quickly . . . . . . . . . . . . . . . . . . 12  
Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Selecting Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Generating Anion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . . . . . 17  
Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . . . . 17  
PROGRAMMING YOUR AIR CONDITIONER  
Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
RECOMMENDATIONS FOR USE  
Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . . 22  
Operating Your Air Conditioner Without the Remote Control . . . . . 22  
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Cleaning Deodorizing and Bio-Green filters (option) . . . . . . . . . . . 24  
TECHNICAL SPECIFICATIONS  
E-3  
View of the Unit  
The design and shape are subject to change according to the model.  
Indoor Unit  
Room temperature sensor  
Air Inlet  
Auto grille  
On/Off switch  
Air filter  
(under the grille)  
Remote Control Sensor  
Air flow blades  
(outlet)  
Operation indicator  
Set temperature &  
room temperature  
Timer indicator  
Sleep Timer indicator  
Anion indicator  
Fan speed setting  
No t e  
If you want to turn on/off the Display during operation,  
press the button on the remote control.  
The room temperature sensor senses air temperature  
around the sensor, and shows the temperature on the  
display.  
E-4  
Outdoor Unit  
UQ07P8GE  
Air Outlet  
UQ09P8GE  
Air Inlet(Rear)  
SH30ZC1(C2)X  
Connection Valve  
(inside)  
Outdoor Unit  
UQ07PBGE UQ09PBGE UQ12PBGE  
Air Inlet(Rear)  
Air Outlet  
Connection Valve  
Outdoor Unit  
SH07ZPGX  
SH07ZPGAX SH09ZPGX SH09ZPGAX  
UQ12PGGB UQ12PGGE SH12ZPGX SH12ZPGAX  
Air Inlet(Rear)  
Air Outlet  
Connection Valve  
(inside)  
Outdoor Unit  
UQ18P0GB  
UQ24P6GB  
UQ18P0GE  
UQT24P6GE SH24TP6X  
SH18ZP0X  
SH18ZP0AX  
SH24TP6AX  
Air Inlet(Rear)  
Air Outlet  
Connection Valve  
E-5  
Remote Control - Buttons and Display  
Operating mode  
Remote control  
transmission indicator  
(
AUTO,  
COOL,  
DRY,  
FAN,  
HEAT)  
Battery discharge indicator  
Fan speed  
Turbo mode  
Temperature setting  
Air flow direction  
Anion indicator  
Sleep mode  
Off Timer setting  
Energy saving  
On Timer setting  
On/Off button  
Digital i On/Off button  
Temperature adjustment  
buttons  
Mode selection button  
(AUTO, COOL, DRY, FAN, HEAT)  
Swing button  
Fan speed adjustment  
button  
Energy saving button  
Turbo button  
Anion button  
Sleep button  
On Timer button  
Off Timer button  
Timer Set/Cancel button  
E-6  
Getting Started  
You have just purchased a split type air conditioner and it has been  
installed by your installation specialist.  
Your Owners Instructions contains valuable information on using your  
air conditioner. Please take the time to read it as it will help you take full  
advantage of the units features.  
The booklet is organized as follow s.  
The follow ing figures are show n on pages from 4 to 6 :  
-
-
Indoor and outdoor units  
Rem ote control(buttons and display)  
They w ill help you find the buttons and understand the sym bols displayed.  
In the manual, you will find a series of step-by-step procedures for each  
function available.  
The illustrations in the step-by-step procedures use three different sym bols:  
PRESS  
PUSH  
HOLD DOWN  
E-7  
Inserting the Remote Control Batteries  
You m ust insert or replace the rem ote control batteries w hen :  
You purchase the air conditioner  
The rem ote control does not w ork correctly  
No t e  
Use two AAA, LR03 1.5V batteries.  
Do not use old batteries or different kinds of batteries together.  
Batteries may be completely discharged after 12 months, even  
if they have not actually been used.  
1
2
Push the battery cover on the rear of the remote control with your thumb  
in the direction of the arrow and remove it.  
Insert the two batteries, taking care to respect the polarities :  
+ on the battery with + on the remote control.  
- on the battery with - on the remote control.  
3
Close the cover by sliding it back until it clicks into place.  
E-8  
Selecting the Automatic Operating Mode  
You can start the air conditioner in Autom atic m ode from your rem ote  
control. In the Autom atic m ode, the optim um tem perature and the fan  
speed is selected autom atically.  
1
If necessary, press the  
(On/Off) button.  
Result:  
The operation indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected  
when the unit was last used.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
If the  
is not displayed at the top of the remote control,  
press the  
appears.  
button on the remote control one or more times until it  
Result:  
The indoor unit beeps each time you press the  
button.  
The air conditioner runs in AUTO mode.  
No t e  
You can change modes at any time.  
E-9  
Cooling Your Room  
You m ust select the Cool m ode if you w ish to adjust the:  
Cooling tem perature  
Fan speed w hen cooling  
1
If necessary, press the  
(On/Off) button.  
Result: The operation indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected  
when the unit was last used.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
If the  
is not displayed at the top of the remote control,  
press the  
appears.  
button on the remote control one or more times until it  
Result:  
The indoor unit beeps each time you press the  
The air conditioner runs in COOL mode.  
button.  
No t e  
You can change modes at any time.  
3
To adjust the temperature, press the  
the required temperature is displayed.  
button one or more times until  
Possible temperatures are between 18°C and 30°C inclusive.  
Result: Each time you press the button:  
- The temperature is adjusted by 1°C  
- The indoor unit beeps  
The air conditioner starts cooling, provided that the room  
temperature is higher than the selected temperature.  
If the room temperature reaches the set temperature, the air  
conditioner stops cooling, but the fan is still operating.  
4
Select the fan speed by pressing the  
until the required setting is displayed:  
button one or more times  
Automatic (rotated :  
)
Low  
Medium  
High  
Result:  
Each time you press the  
beeps.  
button, the indoor unit  
5
To control the direction of the air flow, refer to page 17.  
E-10  
Heating Your Room  
You m ust select the Heat m ode if you w ish to adjust the:  
Heating tem perature  
Fan speed w hen heating  
1
If necessary, press the  
(On/Off) button.  
Result: The operation indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
The air conditioner is fitted with a protection mechanism  
to prevent the unit from being damaged when it is started  
immediately after being:  
IMPORTANT  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
If the  
is not displayed at the top of the remote control, press the  
button on the remote control one or more times until it appears.  
Result:  
The indoor unit beeps each time you press the  
The air conditioner runs in HEAT mode.  
button.  
No t e  
You can change modes at any time.  
3
To adjust the temperature, press the  
button one or more times  
until the required temperature is displayed.  
Possible temperatures are between 16°C and 30°C inclusive.  
Result: Each time you press the button:  
- The temperature is adjusted by 1°C  
- The indoor unit beeps  
The air conditioner starts heating, provided that the room  
temperature is lower than the desired temperature  
(selected temperature+3°C).  
If the room temperature reaches the set temperature, the air  
conditioner stops heating, but the fan is still operating.  
4
Select the fan speed by pressing the  
until the required setting is displayed:  
button one or more times  
)
Automatic (rotated :  
Low  
Medium  
High  
Result:  
Each time you press the  
button, the indoor unit beeps.  
For the first three to five minutes, the fan operates very  
slowly until the air has been sufficiently warmed. Once the  
correct temperature has been reached, the fan is automatically  
set to the required speed.  
5
To control the direction of the air flow, refer to page 17.  
E-11  
Changing the Room Temperature Quickly  
The Turbo cooling/ heating function is used to cool or heat your room as  
quickly as possible.  
Exa m p le : You have just com e hom e and find that the room is very  
hot. You w ish to cool it dow n as quickly as possible.  
The Turbo function operates for 30 minutes with the maximum settings before  
returning automatically to the mode and temperature previously selected.  
1
If necessary, press the  
(On/Off) button.  
Result:  
The operation indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected when the unit  
was last used.  
The indoor unit beeps.  
2
Press the  
Result:  
button.  
The temperature and fan settings are adjusted automatically.  
The air conditioner cools or heats the room as quickly as possible.  
After 30 minutes, the air conditioner is reset automatically to the  
previous mode, temperature and fan settings.  
But, if you press the  
button in DRY or FAN mode,  
it will change to AUTO mode automatically.  
3
4
If you wish to stop the Turbo function before the end of the 30-minute period,  
press the  
button again.  
Result:  
The air conditioner is reset automatically to the previous mode,  
temperature and fan settings.  
To control the direction of the air flow, refer to page 17.  
E-12  
Removing Excess Humidity  
If the atm osphere in your room is very hum id or dam p, you can  
rem ove excess hum idity w ithout low ering the room tem perature too  
m uch.  
1
If necessary, press the  
(On/Off) button.  
Result: The operation indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism  
to prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
It will start up normally after three minutes.  
2
If the  
is not displayed at the top of the remote control, press the  
button on the remote control one or more times until it appears.  
Result:  
The indoor unit beeps each time you press the  
The air conditioner runs in DRY mode.  
button.  
No t e  
You can change modes at any time.  
3
To adjust the temperature, press the  
button one or more times  
until the required temperature is displayed.  
Possible temperatures are between 18°C and 30°C inclusive.  
Result: Each time you press the button:  
- The temperature is adjusted by 1°C  
- The indoor unit beeps  
The air conditioner starts removing the excess humidity;  
the quantity of air is adjusted automatically.  
4
To control the direction of the air flow, refer to page 17.  
E-13  
Airing Your Room  
If the atm osphere in your room is stale, you can air the room using  
the Fan feature.  
1
If necessary, press the  
(On/Off) button.  
Result:  
The operation indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
2
If the  
is not displayed at the top of the remote control,  
press the  
appears.  
button on the remote control one or more times until it  
Result:  
The indoor unit beeps each time you press the  
The air conditioner runs in FAN mode.  
The temperature is set automatically.  
button.  
No t e  
You can change modes at any time.  
3
Select the fan speed by pressing the  
until the required setting is displayed:  
button one or more times  
Low  
Medium  
High  
Result: Each time you press the  
button, the indoor unit beeps.  
4
To control the direction of the air flow, refer to page 17.  
E-14  
Selecting Energy Saving Mode  
If you w ish to save energy w hen using your air conditioner, select the  
Energy saving m ode w ith the Energy saving button.  
1
If necessary, press the  
(On/Off) button.  
Result:  
The operation indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected  
when the unit was last used.  
The indoor unit beeps.  
IMPORTANT  
The air conditioner is fitted with a protection mechanism to  
prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
Stopped  
lt will start up normally after three minutes.  
2
Select COOL mode by pressing the  
button.  
No t e  
You can select the Energy saving mode only in COOL mode.  
3
4
Press the  
Result:  
button.  
The indoor unit beeps.  
The air conditioner runs in the Energy saving mode.  
The outer air flow blade moves up and down.  
To stop the Energy saving mode, press the  
button again.  
To adjust the temperature, press the  
button one or more times  
until the required temperature is displayed. Possible temperatures are  
between 26°C and 30°C inclusive.  
No t e  
If you want to adjust temperature under 26°C, cancel the  
Energy saving mode before adjusting the temperature.  
5
6
To select the fan speed, press the  
the required setting is displayed.  
button one or more times until  
To control the direction of the air flow, refer to page 17.  
E-15  
Generating anion  
The air conditioner can generate anion w ith an ionizer in the indoor  
unit. Since it is an additional function, you can select it any m ode,  
even w hen the air conditioner is turned off.  
1
Press the  
Result:  
button.  
The air conditioner generates anion.  
The indoor unit beeps.  
No t e  
If you press the  
button during off, the air conditioner will  
turn on automatically and generate anion in the Fan mode  
with Low fan speed.  
2
3
If you wish to stop the Anion function, press the  
button again.  
Result: The air conditioner is reset automatically to the previous mode,  
temperature and fan settings.  
To control the direction of the air flow, refer to page 17.  
E-16  
Adjusting the Air Flow Direction Vertically  
Depending on the position of the indoor unit on the w all of your room ,  
you can adjust the position of the outer air flow blade on the bottom  
of the unit, thus increasing the efficiency of the air conditioner.  
1
Press the  
button one or more times as required.  
Result: The outer blade is adjusted vertically.  
RECOMMENDATION  
When...  
Adjust the blade to face...  
Cooling  
Heating  
Upwards.  
Downwards.  
2
If you want the blade to move up and down automatically when the air  
conditioner is operating, press the button.  
Result: The blade move up and down, around the base position set.  
3
To stop the blade moving up and down, press the  
button again.  
No t e  
If you switch the air conditioner... Then the blade is...  
Off  
Closed completely.  
Set to the initial position powered.  
On again  
Adjusting the Air Flow Direction Horizontally  
There are tw o sets of inner air flow blades. J ust as the outer air flow  
blade can be adjusted vertically, the inner blades can be adjusted  
horizontally.  
1
Adjust each set of inner blades to the required position, by pushing or  
pulling them sideways.  
E-17  
Setting the On Timer  
The On Timer enables you to sw itch on the air conditioner automatically  
after a given period of time. You can set the period of time from  
30 minutes to 24 hours.  
1
To set the operating time, press the  
button one or more times until the  
required time is displayed. Possible time is between 0.5 hour and 24 hour  
inclusive.  
2
Press the  
(Set/Cancel) button to complete the setting.  
Result: The remaining time is displayed.  
Blinking of the timer indicator stops.  
The selected mode and the temperature on the display  
disappear after 10 seconds.  
The air conditioner will switch on automatically when the  
counter displayed on the remote control reaches the set time  
and disappears the On timer setting.  
3
To select an operating mode in advance, press the  
button until the  
desired mode is displayed at the top of the remote control.  
Result: The air conditioner will run in the selected mode when it is  
turned on.  
To Cancel the On Timer  
Press the  
(Set/Cancel) button.  
No t e  
If you press the  
button when the Off Timer is set,  
the Off Timer is also cancelled.  
E-18  
Setting the Off Timer  
The Off Timer enables you to switch off the air conditioner automatically  
after a given period of time. You can set the period of time from  
30 minutes to 24 hours.  
1
To set the operating time, press the  
button one or more times until the  
required time is displayed. Possible time is between 0.5 hour and 24 hour  
inclusive.  
2
Press the  
(Set/Cancel) button to complete the setting.  
Result: The remaining time is displayed.  
Blinking of the timer indicator stops.  
The air conditioner will switch off automatically when the  
counter displayed on the remote control reaches the set time  
and disappears the Off timer setting.  
Exam ple If you would like to turn the air conditioner on after 2 hours  
and to operate it for 2 hours:  
1. Press the  
2. Press the  
3. Press the  
4. Press the  
button until ‘2.0 Hr’ is displayed.  
(Set/Cancel) button.  
button until ‘4.0 Hr’ is displayed.  
(Set/Cancel) button.  
No t e  
You can see or change the setting mode and/or the temperature  
by pressing the  
Off timer.  
button or the  
button after setting the  
To Cancel the Off Timer  
Press the  
(Set/Cancel) button.  
No t e  
If you press the  
button when the On Timer is set,  
the On Timer is also cancelled.  
E-19  
Setting the Sleep Timer  
The Sleep Tim er can be used w hen you are cooling or heating your  
room to sw itch the air conditioner off autom atically after a period of  
six hours.  
No t e  
If you w ish to sw itch the unit off at a specific tim e, refer to  
page 19.  
1
2
Make sure that you have selected either COOL or HEAT mode.  
Press the button.  
Result: The indoor unit beeps.  
The air conditioner will be controlled as indicated in the  
illustrations below.  
Cooling The desired temperature is  
increased by 1°C every hour.  
When it has been increased  
by 2°C (after two hours), the  
temperature is maintained for  
four hours.  
Heating The desired temperature is  
decreased by 1°C every hour.  
When it has been decreased  
by 2°C (after two hours), the  
temperature is maintained for  
four hours.  
To Cancel the Sleep Timer  
If you no longer w ish to use the Sleep Tim er that you have set, you  
can cancel it at any tim e.  
Press the  
Result:  
button.  
The indoor unit beeps.  
The  
is no longer displayed.  
The air conditioner operates normally.  
E-20  
Operating Recommendations  
Here are a few recom m endations that you should follow w hen using  
your air conditioner.  
Topic  
Recommendation  
Heating performances  
The heat pump inside the air conditioner  
absorbs heat from outside air and brings it  
indoors. If the temperature of the outside air  
drops, the air conditioner will heat less. If you  
find that the room is not warm enough, use an  
additional heating appliance.  
Warm air circulation  
The air conditioner circulates warm air to heat  
your room; as a result, some time will be  
required after starting the air conditioner to  
warm the entire room. If necessary, set the air  
conditioner on before you wish to use the  
room.  
Frost  
When outside temperatures are low and  
humidity is high, frost may form in the outdoor  
unit when heating is selected.  
If this happens:  
The heating operation is stopped.  
The Deice mode is triggered automatically  
for about seven minutes.  
No intervention is required from you; after  
about seven minutes, the air conditioner starts  
operating again normally.  
High indoor and outdoor If both the indoor and outdoor temperatures  
temperatures  
are high and you select the Heat mode, the  
outdoor unit’s fan and compressor may stop at  
times. This is normal; simply wait until the air  
conditioner switches on again.  
Power failure  
If a power failure occurs when the air conditioner  
is operating, the unit is switched off.  
When the power returns, the air conditioner starts  
up again automatically.  
E-21  
Temperature and Humidity Ranges  
The following table indicates the temperature and humidity ranges within which the air conditioner can be used.  
If the air conditioner is used at...  
Then...  
High temperatures  
The automatic protection feature may be triggered and the air conditioner stopped.  
Low temperatures  
A water leak or some other malfunction may occur if the heat exchanger freezes.  
Water may condense on and drip from the surface of the indoor unit if it is used for long periods.  
High humidity levels  
Mode  
Outdoor Temperature  
Indoor Temperature  
Indoor Humidity  
Heating  
Cooling  
Drying  
0°C to 24°C approx.  
21°C to 43°C approx.  
18°C to 43°C approx.  
27°C or less  
18°C to 32°C approx.  
18°C to 32°C approx.  
-
80% or less  
-
◆◆ If the heating operation is used at below 0°C(outdoor temperature) then, it does not heat at its full capacity.  
If the cooling operation is used at over 33°C(indoor temperature) then, it does not cool at its full capacity.  
Operating Your Air Conditioner Without the Remote Control  
Your air conditioner can be operated directly from the indoor unit if  
the rem ote control is lost or broken.  
1
2
Slide the lower front grille down.  
To switch the air conditioner on, press the ON/OFF switch on the right  
side of the indoor unit.  
Result: The OPERATION indicator on the indoor unit comes on.  
The indoor unit beeps.  
The air conditioner starts up in the most suitable mode for  
the room temperature:  
Room Temperature  
Less than 21°C  
21°C or above  
Operating Mode Temperature Setting  
Heat  
Cool  
22°C approx.  
24°C approx.  
3
To switch the air conditioner off, press the ON/OFF switch again.  
No t e  
Even if the air conditioner has been switched on via the  
ON/OFF switch, operations can still be controlled using the  
remote control as usual.  
E-22  
Solving Common Problems  
Before contacting the after-sales service, perform the follow ing sim ple checks.  
They m ay save you the tim e and expense of an unnecessary call.  
Problem  
Explanation/Solution  
The air conditioner does not  
operate at all  
Check that the breaker used for the air conditioner is switched on.  
Check that the operation indicator on the indoor unit is on;  
if necessary press the  
(On/Off) button on the remote control.  
Check whether the TIMER indicator on the indoor unit is switched on.  
If so:  
- Wait until the switch-on time is reached and the air conditioner starts  
up automatically  
- Cancel the timer (see pages 18 and 19 for further details)  
The air conditioner does not  
operate with the remote control  
Check that there are no obstacles between you and the indoor unit.  
Check the remote control batteries.  
Check that you are close enough to the indoor unit (seven meters/  
yards or less).  
No beep is heard when you press  
Check that you are pointing the remote control at the remote control  
sensor in the right of the indoor unit.  
the  
(On/Off) on the remote  
control  
Replace the remote control batteries if necessary.  
The air conditioner does not cool  
or heat  
Check that the correct operating mode has been selected (AUTO,  
COOL, HEAT).  
The room temperature may be too low or too high.  
Dust may be blocking the air filter guard; refer to page 24 for cleaning  
instructions.  
Check that there is no obstacle in front of the outdoor unit.  
When heating, the required room  
temperature is never reached and  
the air conditioner frequently stops  
Check that the required temperature has been set correctly.  
Increase the fan speed.  
If the air flow is directed upwards, use the remote control to direct it  
downwards.  
The fan speed does not change  
Check that the operating mode is set to COOL, HEAT or FAN ; in the  
AUTO mode, the fan speed changes automatically and in the  
DRY mode, it is set to AUTO.  
when you press the  
button  
The air flow direction does  
not change when you press the  
button  
Check that the air conditioner has been switched on; if necessary,  
press the  
(On/Off) button on the remote control.  
The timer is not correctly triggered  
Check that the timer has been programmed correctly; see pages 18  
and 19.  
Odours are permeated in the room Air the room.  
during air conditioning  
E-23  
Cleaning Your Air Conditioner  
To get the best possible use out of your air conditioner, you m ust  
clean it regularly to rem ove the dust that accum ulates on the air filter.  
Before cleaning your air conditioner, ensure that you  
have sw itched off the breaker used for the unit.  
IMPORTANT  
1
2
Slide the lower front grille down.  
Slide the upper front grille up slightly, then open the grille by pulling right  
and left sides of the grille.  
Grille support  
3
4
Disassemble the upper front grille by opening the grille completely.  
Lift out the bottom edge of the air filters and pull down to release them.  
5
6
Remove all dust on the air filters with a vacuum cleaner or brush.  
When you have finished, insert the top part of the filters into their slot  
and push down on the bottom edge until they click into place.  
7
8
Clean the front grille with a damp cloth and mild detergent (do NOT use  
benzene, solvents or other chemicals).  
Fix the left side of grille support, then insert the right side of grille support.  
Body groove  
Lower  
front  
grille  
Not e If you have not used the air conditioner for a long period of time, set the fan  
Hook  
going for three to four hours to dry the inside of the air conditioner thoroughly.  
To close the upper front grille completely after cleaning filters, turn on and turn off  
the air conditioner.  
Cleaning Deodorizing and Bio-Green filters (Option)  
◆◆07/09◆  
To rem ove m inute dust particles and odors, deodorizing and Bio-Green  
filters are installed in the air conditioner. You should clean the filters  
every 3 m onths.  
Deodorizing filter  
1
Open the upper front grille by pulling right and left sides of the grille.  
2
Pull out the deodorizing and Bio-green filters.  
Bio-Green Filter  
◆◆12/18/24◆  
3
4
Wash the filters with clean water, then dry them in the shade.  
Insert the filters into the original position.  
Bio-Green Filter  
No t e  
You can change the position of filters with each other.  
5
Close the front grille.  
Deodorizing filter  
E-24  
Technical Specifications  
Model Indoor unit  
Power Supply  
AQ07P8GE  
AQ07PBGE  
SH07ZPG  
SH07ZPGA  
AQ09P8GE  
AQ09PBGE  
SH09ZPG  
SH09ZPGA  
AQ12PBGE  
AQ12PGGE  
SH12ZPG  
220-240V~, 50Hz  
SH12ZPGA  
AQ18P0GE  
SH18ZP0  
SH18ZP0A  
AQT24P6GE  
SH24TP6  
SH24TP6A  
AQ12PGGB  
AQ18P0GB  
AQ24P6GB  
220V~, 60Hz  
E-25  
THIS AIR CONDITIONER IS MANUFACTURED BY:  
ESTE AIRE ACONDICIONADO HA SIDO FABRICADO POR:  
CE CLIMATISEUR EST FABRIQUE PAR:  
QUESTO CONDIZIONATORE D’ARIA È PRODOTTO DA:  
ESTE APARELHO DE AR CONDICIONADO É FABRICADO POR:  
DIESE KLIMAANLAGE IST FABRIZIERT VON:  
AYTH H ™Y™KEYH KATA™KEYA™THKE A¶O:  
ELECTRONICS  

Mitsubishi Electronics Peh 6eksb User Manual
Mitsubishi Motors Automobile Parts R4a3 User Manual
Omega Fma 1500 User Manual
Panasonic Cw Xc124hu User Manual
Samsung Avmbh020ea B 0 User Manual
Sanyo Eco G Sgp Ew240m2g2w User Manual
Savin 3300dnp User Manual
Savin 7700w User Manual
Toshiba Ras 13ukv E2 User Manual
Vector Power City Dk080706 User Manual