Oki C 7300 User Manual

C7100/7300/C7500  
Duplexer  
Installation Instructions  
Duplexer Part Number: 70040401  
5. Close the front cover.  
b. Scroll down to Installable  
Phase 1 - Install  
Options and click Duplex.  
If you will be using the duplex  
c. Under Change ‘Duplex’ Set-  
unit to print complicated files  
!
ting, click Installed.  
with graphics, you need to pur-  
chase and install 64 MB additional  
printer memory (OKI # 70041001).  
WINDOWS ME, 98 AND 95:  
a. Click the Device Options tab.  
1. Unpack the duplex unit and remove  
any shipping materials.  
b. Click Duplex.  
c. Under Change setting for:  
6. Turn on the printer.  
2. Turn off the printer, then open the  
front cover.  
Duplex, click Installed.  
Phase 2 - Activate the Duplex  
Unit in the Driver  
4. Click OK, then close the Printers  
dialog box.  
MACINTOSH® DRIVER (OSX)  
WINDOWS® PCL DRIVER  
1. As of OS 10.1.5, Apple has not  
enabled Printer Options  
1. Click Start — Settings —  
Printers. The Printers dialog box  
opens.  
adjustment. Therefore, this  
selection is unavailable.  
2. Right-click the OKI C7100, C7300  
or C7500 PCL printer icon, then  
click Printing Preferences  
(Windows 2000), Properties  
(Windows XP, Me, 98, 95) or  
Document Defaults (Windows  
NT 4.0).  
MACINTOSH® DRIVER (CLASSIC)  
3. Locate the slides inside the printer.  
1. Activate Chooser from the Apple  
menu.  
2. Select LaserWriter 8.  
3. Click Printer — Setup.  
4. Click Configure.  
3. On the Paper tab, click Device  
options. Or, with Windows XP,  
select the Device Option tab.  
5. Change the Duplex setting to  
Installed.  
4. Click Duplex option unit to select  
6. Click OK twice.  
it, then click OK.  
7. Close Chooser.  
5. Click OK, then close the Printers  
dialog box.  
4. Place the duplex unit guide rails on  
the slides, then push the duplex unit  
all the way into the printer.  
WINDOWS POSTSCRIPT® DRIVER  
1. Click Start — Settings —  
Printers. The Printers dialog box  
opens.  
2. Right-click the OKI C7100, C7300  
or C7500 PostScript printer icon,  
then click Properties.  
3. Change the setting:  
WINDOWS XP, 2000 AND NT 4.0:  
a. Click the Device Settings tab.  
58364601  

Lexmark X360 Series User Manual
Mitsubishi G 50a User Manual
Oki Btx 208 User Manual
Panasonic Cw Xc123vu User Manual
Philips Sbc Sc469 User Manual
Sanyo N 270aa User Manual
Sharp Af S120dx User Manual
Toshiba Air Conditioner Mmy Map1004ht8zg E User Manual
Whisperkool 081310 User Manual
York Ycal0041 User Manual