WASHING MACHINE
ZWF 1111 W
ZWF 1311 W
Off
Cottons
ZWF 1111
W
Mini 30°
Spin
Drain
95°
1100
900
700
500
Prewash
Washing
Door
60°
Quick
End cycle
Rinses
Time
Extra rinse
40°
30°
30°
Wool
Night
Cycle
1/2
Delay
Time
Start/
Pause
Spin
Load
Option
40°
60°
40°
30°
30°
Delicates
40°
Synthetics
Quick Installation Guide:
visit our WEB SITE to view an install video
GB
INSTRUCTION BOOKLET
132 981 530
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Maintenance and Cleaning
Descaling
17-19
16
For the User
Important Safety Information
Your New Washing Machine
2
4
After each wash
16
Maintenance Wash
16
External cleaning
16
Description of the Appliance
Detergent dispenser drawer
Child safety feature
5
5
5
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the pump
16
16
16-17
18
The Control Panel
6-9
Cleaning the water inlet filter
The dangers of freezing
Emergency emptying out
Operating Sequence
Load the laundry
10-11
10
18
19
Measure out the detergent
Measure out the fabric softener
10
Something Not Working
Service and Spare Parts
Guarantee Conditions
20-21
21-22
22
10
Switch the machine on and select the desired
programme/fabric
10
10
10
11
11
11
Select the spin speed or the Rinse Hold option
Select the desired options
For the Installer
Start the programme
Installation Instructions
23-27
How to change a programme during its cycle
How to cancel a programme during its cycle
Technical Specifications
Unpacking
23
24
How to open the door during the cycle of
a programme
11
11
Positioning
24
End of programme
Installation on a suspended floor
Water inlet
24
Washing Hints
Which detergent?....
And in which form?
12
13
13
25
Water drainage
25-26
26
Levelling
Special conditions
In the interest of the environment
Electrical connection
Permanent connection
26
Wash Care Symbols
Washing Programmes
14
26-27
27
15-16
27
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Your New Washing Machine
Your new washing machine meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption.
Even small loads are washed “economically” because the amount of water used is regulated
automatically according to the load and type of fabric.
●
Automatic cooling of the wash water to 60°C
In the interest of the
before draining, with the 95°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.
environment
●
Materials marked with the symbol
recyclable.
are
●
●
The special wool programme with its new delicate
wash system treats your woollens with extreme care.
●
●
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
The balance control device ensures that the
washing machine remains stable when spinning.
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
Ecological hints
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
●
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
●
Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. For more detailed information about
recycling of this product, please contact your local
city office, your household waste disposal service or
the shop where you purchased the product.
●
The machine works more economically if it is fully
loaded.
●
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
●
Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
How do we help to protect the environment?
We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed “Something
Not Working”.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the Appliance
This new machine meets all modern requirements for effective treatment of laundry with low water, energy and
detergent consumption.
• The possibility of selecting the programme/temperature and all the options offered by this washing machine gives
you truly “customised” washing.
• The automatic cooling of the washing water from 95° to 60°C before draining reduces thermal shock to fabrics,
helping to prevent creasing.
• The ECO valve allows total use of detergent and reduces water consumption so saving energy.
• The balance control device prevents vibration during spinning.
2
1
1 Detergent dispenser drawer
2 Control panel
Off
Cottons
ZWF 1111
W
Mini 30°
Spin
Drain
95°
1100
900
700
500
Prewash
Washing
Door
60°
Quick
End cycle
Rinses
Time
Extra rinse
40°
30°
30°
Wool
Night
Cycle
1/2
Load
Delay
Time
Start/
Pause
Spin
Option
40°
60°
40°
30°
30°
Delicates
40°
Synthetics
3 Door opening handle
4 Drain pump
3
5 Adjustable feet
4
5
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
C0063
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
P1131
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The Control Panel
Off
ZWF 1111 W
Cottons
Mini 30°
Spin
Drain
95°
Washing
Door
1100
900
700
500
Prewash
60°
End cycle
Quick
Rinses
Time
Extra rinse
40°
30°
30°
Wool
Night
Cycle
1/2
Load
Delay
Time
Start/
Pause
Spin
Option
40°
60°
40°
30°
30°
Delicates
Synthetics
40°
1
2
3 4
5 6 7 8 9 10
1 Detergent dispenser drawer
IMPORTANT!
By pressing the Half Load and Start Pause buttons
simultaneously for about 3 secondes, the acoustic
signal is deactivated at the end of the cycle, when
selecting the programmes and in case of an incorrect
option selection .
2 Programme selector dial
The selector dial is divided into the following sections:
• Cottons (blue colour),
By pressing these 2 buttons again the acoustic signal
is reactivated.
• Synthetics (green colour)
• Delicates (gray colour)
• Wool (Handwash) (gray colour)
• Rinses, Drain, Spin and Mini 30° (green colour)
• “O” Off = Reset/Switching the machine off
3 “Spin” button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washing machine or to
Off
Cottons
Mini 30°
Spin
Drain
95°
choose the
“Rinse Hold” option. The relevant light
60°
Rinses
will light up.
40°
30°
60°
40°
30°
Wool
Maximum speeds for the different models are:
• for cottons: 1100 rpm for ZWF 1111 W and 1300
rpm for ZWF 1311 W
40°
30°
30°
Delicates
Synthetics
40°
• for synthetics fabrics and Wool: 900 rpm;for
• for delicate fabrics and Mini 30°: 700 rpm.
The selector dial can be turned either clockwise or
anticlockwise.
E- position corresponds to the ENERGY SAVING
programme for cotton and synthetics and position “O”
Off to Reset programme/Switching off of the machine.
corresponds to a cold wash
“Rinse Hold” position: when you choose this option,
the machine will not drain the water of the last rinse, so
as not to crease the laundry.
At the end of the cycle, the light of the “Start/Pause”
button goes out, the “End cycle” light illuminates and
the “Door” light stays on (the door is locked) to
indicate that the water must be drained. A flashing zero
appears on the display.
At the end of the programme the selector dial must be
always turned to position “O” Off , to switch the
machine off .
To complete the cycle, there are 2 possibilities for
emptying out water:
Attention!
If you turn the programme selector dial to another
programme when the machine is working, the warning
«Err» message appears for 3 seconds on the display
while the buzzer sounds 3 times .
• Select programme “Drain”: the water is emptied out
without spinning.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
• Select programme “Spin”. Select the spin speed by
The prewash ends with a short spin in programmes
for cotton and synthetic fabrics, whereas in the
programme for delicate fabrics the water is only
drained.
means of the relevant button and then depress the
Start/Pause button. The water is emptied out and
the laundry is spun at the selected spin speed.
Attention! Before selecting the “Drain” or the “Spin”
programmes, the selector dial must to be turned to the
“O” Off position.
● Quick: select this option for laundry that is only
slightly soiled (not available for Wool, Mini 30°
and E-programmes).
The washing time will be reduced according to the
type of fabric and the selected temperature.
4 “Night Cycle” button
● Extra rinse: This option can be selected with all
programmes, except the wool programmes and Mini
30°. The machine will add 2 rinses to the selected
programme.
This option is recommended for people who are
allergic to detergents, and areas where the water is
very soft.
When you choose this option, the machine will not
drain the water of the last rinse, so as not to crease the
laundry. As all spinning phases are suppressed, this
washing cycle is very quiet and it can be useful at night
or in times with a more economical power rate.
On cotton and synthetic programmes the rinses will be
performed with more water.
The Prewash, the Quick and the Extra rinse options
cannot be selected together by means of the relevant
button.
At the end of the cycle, the door is locked, the light of
the “Start/Pause” button goes out, the “End cycle”
light illuminates, the light of “Night Cycle”
button
and the “Door” light remain lit to indicate that the water
must be drained and a flashing zero will appear on the
display.
7 Display
The following pieces of information are shown on the
display:
To complete the cycle, there are 2 possibilities for
emptying out water:
•
Duration of washing programme in hours and
minutes, after you have selected a programme.
• Select programme “Drain”: the water is emptied out
without spinning.
• Select programme “Spin”. Select the spin speed by
means of the relevant button and then depress the
Start/Pause button. The water is emptied out and
the laundry is spun at the selected spin speed.
2.05
Attention! Before selecting the “Drain” or the “Spin”
programmes, the selector dial must to be turned to the
“O” Off position.
While the programme is running (after you have
pressed the “Start/Pause” button), the displayed time
value decreases by one unit every minute.
5 “1/2 Load” button
Select this option to reduce water consumption on the
rinse cycle when washing ONLY a smaller load of
cottons or linens (maximum load size = 2,5 kg). The
machine perform 2 rinses instead of 3.
• The washing machine has stopped with water in
the tub, at the end of a programme with the
“Rinse Hold” or “Night Cycle”
option: this is indicated by a flashing zero. The
“Door” light will be lit and the door will be locked.
• The washing machine has completed the
programme: this is indicated by a flashing zero. The
zero will reappear when you switch the washing
machine on, unless the previous programme has been
erased by turning the programme selector dial to the
“O” Off position. The “Door” light will be off and
the door can be opened.
6 “Option” button
Press this button to select the following options:
● Prewash: select this option if you wish your laundry
to be prewashed before the main wash (not available
for Wool and Mini 30° programmes).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
The incorrect selection is also indicated by an audible
warning signal.
• An alarm code indicates a fault in the machine
operation (see the relevant chapter on page 20).
0
E20
Important!
The first time you use the washing machine, when
you switch it on, it may display a flashing zero and give
an audible warning signal. This is due to the fact that the
washing machine has performed a washing cycle during
the manufacturer’s inspection tests, and this cycle has
not been erased after its completion.
8 “Delay Time” button
This button makes it possible to delay the starting of the
programme selected from 30 min - 60 min - 90 min, 2
hours and then by 1 hour up to a maximum of 23 hours.
The delay you have selected is shown on the display for
about 3 seconds; afterwards, the duration of the
programme reappears.
• Delay start, a time value indicated in hours and
selected by means of the relevant button (max 23
hours).
You must select this option after you have set the
programme and before you press the “Start/Pause”
button.
The time value shown on the display will decrease by
one unit every hour.
You can change the delay time at any moment,
before you press the Start/Pause button.
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the “Start/Pause” button, the
countdown begins, and the delay time value decreases
by one unit every hour and then, when 2 hours remain,
the time decreases in 30 minute intervals.
If you have already pressed the Start/Pause button, and
you wish to cancel the delay time, proceed as follows:
• set the washing machine to Pause by pressing the
“Start/Pause” button;
• press the “Delay Time” button until the display shows
0’
the symbol « ».
You can delay the start of the selected programme by
up to 23 hours in one hour intervals.
• press the “Start/Pause” button again.
• An incorrect option selection has been made: this is
indicated by the message Err when a function
incompatible with the current programme is selected.
Important!
The door will be locked throughout the delay time (the
“Door” light will be on).
If you need to open the door, you must first set the
washing machine to Pause by pressing the
“Start/Pause” button. The “Door” light goes off and
the door can be opened.
After you have closed the door, press the “Start/Pause”
button again.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
8 “Start/Pause” button
This button has two functions:
• Start: after you have selected the desired programme
and options, press this button to start the washing
machine. The light above the button will stop flashing
and remain lit.
• Pause: when you press this button again, the
programme in progress is interrupted. The light above
the button will start flashing. To restart the
programme, press the button again.
Important! You must set the washing machine to
Pause before you make any change in the programme
in progress.
10 Programme phase indicator
lights
When you select a programme, all the pilot lights are
off.
Washing
Door
End cycle
After you have started the programme, the “Washing”
and the “Door” lights illuminate and will remain lit.
At the end of the programme, the “Washing” light goes
off, the “End cycle” light illuminates and the “Door”
light goes off. It will be possible to open the door.
When the “Door” light is on, the door is locked and is
not possible to open it.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Sequence
Before the first wash we recommend that you pour 2
4. Switch the machine on and
select the desired programme
litres of water into the main wash compartment
of
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 95°C, with the machine
empty, in order to remove any manufacturing residue
from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
Turn the selector dial to the desired programme to
switch the appliance on. The display will show the
duration of the selected programme.
To switch the appliance off turn it to “O” Off position.
The “Start/Pause” button light will start flashing.
Off
1.Load the laundry
Open the door.
Cottons
Mini 30°
Spin
Drain
95°
60°
Rinses
40°
30°
60°
40°
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
2.05
30°
Wool
40°
30°
30°
Delicates
Synthetics
40°
Close the door.
5. Select the spin speed or the
RINSE HOLD option
Press the “Spin” button repeatedly, in order to select the
desired spin speed or the
relevant light will light up.
“Rinse Hold” option. The
P0004
If you select the
will stop at the end of the programme with the water still
in the tub.
“Rinse Hold” option, the machine
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
ZWF 1111 W
ZWF 1311 W
main wash compartment
If you wish to carry out the prewash, pour detergent into
the appropriate compartment marked
.
1100
900
700
500
1300
1100
900
.
700
3.Measure out the fabric
softener
Spin
Spin
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
6. Select the desired options
Depress the relevant buttons to select the required
options. The corresponding light illuminates.
Prewash
C0064
Quick
C0065
Extra rinse
Night
Cycle
1/2
Load
Close the drawer gently.
Option
10
Download from Www.Somanuals.com. All Manuals Search And Download.
• the level of the water is not high;
If you select the “Night Cycle”
option, the machine
will stop at the end of the programme with the water
still in the tub.
If these requirements are met, when you pause the
washing machine, the “Door” pilot light goes off and
the door can be opened.
Should it not be possible to open the door (“Door” pilot
light on), and should it be absolutely necessary to do
so,switch the machine off by turning the selector dial on
Off position.
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperature of the
water in the washing machine!
7. Start the programme
Press the “Start/Pause” button. The relevant light will
stop flashing and the “Washing” and “Door” pilot
lights illuminate and will remain lit.
START/
PAUSE
After closing the door, select the programme again and
depress the Start/Pause button.
11. End of programme
At the end of the programme, the washing machine
stops automatically and gives an audible signal.
The light of the “Start/Pause” button, the “Door” and
“Washing” pilot lights go off and the light “End cycle”
illuminates. The display will show a flashing zero.
8. How to change an option or a
programme during its cycle
If the programme has already started, before you make
any change, you must pause the washing machine by
pressing the Start/Pause button.
If you had selected the
“Rinse Hold”or the “Night
Cycle” option, the corresponding button lights will
be on, the display will show a flashing zero but the
“Door” pilot light will stay on to indicate that the door
is locked and the water must be drained.
It is possible to change any option before the
programme carries it out.
Changing a running programme is possible only by
cancelling it and selecting a new programme. Turn the
programme selector dial to “O” Off position and then to
the new programme position. Start the new programme
by depressing the Start/Pause button. The washing
water remains in the tub.
To complete the cycle, there are 2 possibilities for
emptying out water:
• turn the selector dial to the “O” Off position and
then select programme “Drain”: the water is
emptied out without spinning.
or
Note: To drain the water before starting the new cycle
you have to cancel the programme and select the Drain
programme.
• turn the selector dial to the “O” Off position and
then select programme “Spin”. Select the spin speed
by means of the relevant button and then depress the
Start/Pause button. The water is emptied out and
the laundry is spun at the selected spin speed.
9. How to cancel a programme
during its cycle
Turn the selector dial to “O” Off position to cancel a
programme which is running. Now you can select a new
programme.
When the programme has been completed the audible
signal is given. Turn the selector dial on Off position to
switch the machine off. Remove the laundry from the
washing machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get damaged
in a subsequent wash (e.g. by shrinking) or bleed colour
into another load of laundry.
10. How to open the door during
the cycle of a programme
You can open the door, after having set the washing
machine to PAUSE, provided the following conditions
exist:
We advise you to close the water supply tap and
disconnect the plug from the socket. Leave the door ajar
in order to air the washing machine.
• the washing machine is not in the heating phase
beyond 55°C;
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Hints
●
●
Do NOT overload the machine. Weigh the laundry the
Use the correct quantities of detergent.
first few times you use the appliance.
For wool, use gentle detergent only in small
quantities.
The average weights of the most common items are
listed below as a guide:
●
●
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
1000g = 1 kg
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special pre-
soak product or biological detergent.
Sheet
700-1000 g
100-200 g
400-500 g
50-100 g
Pillow case
Tablecloth
Serviette
●
●
Only wool marked “Pure New Wool - washable,
preshrunk” can be washed in the the wool
programme; other types of wool should be washed
by hands.
Tea towel
70-120 g
Linen hand towel
Towelling hand towel
Towelling bath towel
Bath robe
100-150 g
150-250 g
700-1000 g
1000-1500 g
200-300 g
150-200 g
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
Man’s shirt
Apron
●
Once you have finished using the machine, you are
advised to unplug it and turn off the water tap.
●
Load the laundry loosely alternating large items with
small ones.
●
●
●
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Avoid washing unhemmed or torn items as they may
unravel.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
●
●
●
When washing curtains, remove the hooks.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
●
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
●
●
●
White items should not be washed with coloured
items.
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Use a good quality detergent suitable for automatic
washing machines.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
And in which form?
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is
your own personal choice.
Which detergent?....
To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents recommended
for use in automatic machines.
To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol
the machine immediately upon placing the detergent in
the dispenser drawer.
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
WHITES
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
, start
NON BIOLOGICAL
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the detergent
into the specially designed dosing device* which
should be placed on top of the laundry, and at the back
of the machine drum.
COLOURS
For coloured items you should use a
detergent which is designed to clean
while maintaining the original colour.
Ariel Color does not contain bleach
and therefore helps to preserve
colours.
* If you use a dosing device in a washer dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
DELICATE ITEMS
FABRIC CONDITIONERS
These are ideal for improving ‘softness’, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
When washing delicates such as
woollens, you should use a product
which is specially designed to care for
fine fabrics.
Dreft Automatic is suitable for
woollens and other delicates.
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
LAUNDRY BLEACH
For additional stain removal you may
wish to use a product such as Ace
Gentle Bleach which is used in addition
to your chosen detergent. Ace is
suitable for all washable fabrics
including silks, woollens and colours.
marked with the symbol
.
Follow the manufacturer’s dosage
instructions and never exceed the
MAX level.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
Normal (Maximum)
Normal (Maximum)
FABRIC
White Cotton or Linen
without Special Finishes
95
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
60
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.
50
Reduced (Medium)
Normal (Maximum)
Reduced (Medium)
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
40
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
Wool, wool mixtures, Silks
Do not machine wash
40
Much Reduced (Minimum)
Hand wash only
BLEACHING
Chlorine bleach may be used
IRONING
Cotton, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Hot iron
Warm iron
Cool iron
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
TUMBLE DRYING
with high heat setting
with low heat setting
May be tumble dried
A cross through any symbol means «DO NOT»
X
Important Notes
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
Once the dispenser has been filled, close it by pushing it
in gently. This is particularly important if you are using
fabric conditioner to avoid the conditioner entering the
machine prematurely.
When using liquid detergent and a prewash programme,
place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Consumptions*
Programme/
Load
Fabrics
Available options
Type of laundry
Water
temperature
Energy kWh
litres
Spin reduction/
Night Cycle
1/2 Load, Prewash,
Quick, Extra rinse
Sheets, household
linen, towels,
tablecloths
95°
White
cotton
5 Kg
2.1
57
Cottons
Spin reduction/
Night Cycle
1/2 Load, Prewash,
Extra rinse
White
cotton or
fast
Sheets, household
linen, towels,
tablecloths
E60° Cottons
Economy
49
57
0.95
1.2
5 Kg
5 Kg
colours
Fast coloured and
non-fast items, for
example hand towels,
sheets, underwear,
tablecloths, shirts
Spin reduction/
Night Cycle
1/2 Load, Prewash,
Quick, Extra rinse
60° - 40°-
30°
White and
coloured
cotton
Cottons
Spin reduction/
Night Cycle
1/2 Load, Prewash,
Extra rinse
Coloured items, for
example underwear,
shirts, blouses
E40° Cottons
Economy
Coloured
cotton
5Kg
1.14
0.8
49
42
Spin reduction/
Night Cycle
Prewash, Quick,
Extra rinse
60° - 40°-
30°
Shirts, blouses,
underwear, mixed
fabrics
Synthetics
Synthetics
Delicates
Wool
2,5 Kg
Synthetics
Spin reduction/
Night Cycle
Prewash, Quick,
Extra rinse
Easy Iron
30°
Synthetics
Shirts, blouses,
underwear, mixed
fabrics
2,5 Kg
2,5 Kg
0.5
52
57
Spin reduction**/
Night Cycle
Prewash, Quick,
Extra rinse
Acrylic, viscose,
polyester items,
curtains
40° - 30° -
Delicates
0.55
Garments bearing the
“ Pure new wool,
non-shrink, machine
washable” or “Hand
wash” label
Spin reduction/
Night Cycle
40° - 30° -
Wool
55
2 kg
0.35
The “E60° Cottons ” is the reference programme for the data entered in the energy label, in compliance with EEC
92/75 standards.
* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type
of laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest
temperature provided for each programme.
**The spin reduction is available only in the model ZWF 1111 W.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Consumptions*
Programme
description
Load
Programme
Available options
Water
Energy kWh
litres
Spin reduction/
Night Cycle
Extra rinse
3 rinses
Long spin at max.
speed
Rinses
5 Kg
0.06
59
Drain
For emptying out the last
rinse of the programmes
with “Rinse hold” /
or “Night Cycle”
option
Water draining
5 Kg
-
-
-
Drain and long spin at
max. speed*
Spin
Spin reduction
-
40
-
5 Kg
-
Spin
reduction**/
Mini 30°
Wash at 30°C
2 rinses
Short spin
2.5 Kg
0.3
Short cycle for lightly
soiled fabrics
Night Cycle
For cancelling the
programme which is
running or to switch
the machine off
-
-
“ ” Off / Reset
O
* You can reduce the spin speed by means of the relevant button to adapt it to the fabrics to be spun.
** The spin reduction is available only in the model ZWF 1111 W.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you must
To aid cleaning, the top part of the additive compartment
DISCONNECT the appliance from the electricity supply.
should be removed.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
C0067
C0066
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Maintenance Wash
C0068
P1086
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
To run a maintenance wash:
●
The drum should be empty of laundry.
●
Select the hottest cotton wash programme.
●
Use a normal measure of detergent, must be a
powder (such as Ariel Futur).
External cleaning
Clean the exterior cabinet of the appliance with soap and
water only, and then dry thoroughly.
Cleaning the dispenser drawer
P0038
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.
Cleaning the pump
The pump should be inspected if
• the machine does not empty and/or spin
• the machine makes an unusual noise during draining
due to objects such as safety pins, coins etc. blocking
the pump.
Proceed as follows:
• Disconnect the appliance.
• If necessary wait until the water has cooled down.
• Open the pump door.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
• Screw the pump cover fully in.
• Close the pump door.
Warning
When the appliance is in use and depending on the
programme selected there can be hot water in the pump.
Never remove the pump cover during a wash cycle,
always wait until the appliance has finished the cycle,
and is empty. When replacing the cover, ensure it is
securely retightened so as to stop leaks and young
children being able to remove it.
P1114
• Place a container close to the pump to collect any
spillage.
• Pull out the emergency emptying hose, place it in the
container and remove its cap.
Cleaning the water inlet filter
• When no more water comes out, unscrew the pump
cover and remove it. Always keep a rag nearby to dry
up spillage of water when removing the cover.
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
Turn off the water tap. Unscrew the water inlet hose.
Clean the filter using a hard bristle brush.
Tighten up the inlet hose.
P1115
• Remove any objects from the pump impeller by
rotating it.
P1090
The dangers of freezing
If the machine is installed in a place where the
temperature could drop below 0°C, proceed as follows:
• Remove the plug from the socket.
• Close the water tap and unscrew the water inlet hose
from the tap.
• Place the end of the emergency emptying hose and
that of the inlet hose in a bowl placed on the floor and
let water drain out.
• Put the cap back on the emergency emptying hose and
place the latter back in its seat.
• Screw the water inlet hose back on and reposition the
emergency emptying hose after having put the cap on
again.
By doing this, any water remaining in the machine is
removed, avoiding the formation of ice and,
consequently, breakage of the affected parts.
When you use the machine again, make sure that the
ambient temperature is above 0°C.
P1117
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
Every time you drain the water through the emergency
emptying hose you must pour 2 litres of water into the
main wash compartment of the detergent drawer and then
run the Drain programme. This will activate the ECO
valve and avoid the detergent remains being wasted.
Emergency emptying out
If the water is not discharged, proceed as follows to
empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the pump door;
• place a bowl on the floor and place the end of the
emergency emptying hose into the bowl. Remove its
cap. The water should drain by gravity into the bowl.
When the bowl is full, put the cap back on the hose.
Empty the bowl. Repeat the procedure until water
stops flowing out;
• clean the pump if necessary as previously described;
• replace the emergency emptying hose in its seat after
having plugged it;
• screw the pump cover again and close the door.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed
below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
During machine operation it is possible that one of the following alarm codes appears on the display and at the same
time the buzzer sounds:
E 10
E 2 0
E 40
-
-
-
: problem with the water supply
: problem with water draining
: door open
Once the problem has been eliminated, press the “Start/Pause “button to restart the programme. If after all checks, the
problem persists, contact your local Service Force Centre.
Symptom
Possible causes
●
E 40
)
The machine does not start
The door has not been closed. (
●
The plug is not properly inserted in the power socket.
There is no supply at the socket.
The main fuse or the fuse in the plug has blown.
The “Start/Pause” button has not been depressed.
A delayed start has been selected.
●
●
●
●
●
●
●
●
E 10
The water tap is closed. (
The filter in the inlet hose is blocked.(
The inlet hose may be squashed or kinked. (
)
The machine does not fill
E 10
)
E 10
)
E 40
The door has not been closed. (
)
●
●
●
The machine fills then empties
immediately
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
●
●
●
●
E 2 0
)
The machine does not empty and/or
does not spin
The drain hose may be squashed or kinked. (
The “Rinse Hold” or “Night Cycle” option has been selected.
E 2 0
The drain pump may be blocked. (
)
The drain hose extension, if fitted, is not correct. Follow the
instructions for connecting to the waste.
●
●
The drainage system pipes are blocked.
The wash load is unbalanced: redistribute the clothes inside the drum to
allow the machine to spin.
●
●
There is water on the floor
Too much detergent or unsuitable detergent has been used (creates too
much foam).
Check whether there are any leaks from the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if
it is damp.
●
●
●
●
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
The cap on the emergency emptying hose has not been replaced after
cleaning the pump.
●
Unsatisfactory washing results
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
●
●
●
Stubborn stains have not been treated prior to washing
The correct wash programme/temperature has not been selected.
Too much laundry has been placed in the drum.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible causes
●
The machine vibrates when spinning
The machine is in contact with the wall or furniture.
The machine is not level and stable (check diagonally).
The washing load is badly distributed in the drum.
Maybe there is very little laundry in the drum.
●
●
●
●
●
●
The door will not open
The water level is above the bottom edge of the door.
The machine is heating the water.
The drum is turning.
In any case, the door can be opened only when the “Door” pilot light
has gone off.
●
The electronic unbalance detection device has cut in because the
Spinning starts late or the machine
does not spin
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 10 minutes, the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case, redistribute the load
manually and select the spin programme.
●
The machine makes an unusual
noise
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
●
No water is visible in the drum
Machines based on modern technology operate very economically
using very little water without affecting performance.
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture)
0870 5 929929
Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.
For the address of your local Service Force Centre and
further information about Service Force, please visit the
5. The purchase date.
Please note that a valid purchase receipt or guarantee
documentation is required for in-guarantee service
calls.
For Customer Service in Ireland please contact us at the
address below:
Zanussi Electrolux - Electrolux Group (Irl) Ltd
Long Mile Road - Dublin 12
Republic of Ireland
Tel: +353 (0)1 4090751
P
r o
M
d
o
.
N
d
.
.
.
o
. . . . . . . .
. . . . . . . . . .
.
S
e r
.
N o
.
Email: [email protected]
.
. . . . . . . . .
Mod. ..........
Prod. No. ...........
To buy accessories, consumables and spare parts at
electrolux.co.uk
Ser. No. .........
P0042 BD
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Care Department - Zanussi Electrolux
Customer Care Department
Major Appliances - Addington Way
Luton - Bedfordshire
LU4 9QQ
For general enquiries concerning your Zanussi
Electrolux appliance or for further information on
Zanussi Electrolux products, please contact our
Customer Care Department by letter or telephone at the
Tel 08705 727727*
* calls to this number may be recorded for training
purposes.
Guarantee Conditions
●
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
Standard guarantee conditions
We, Zanussi Electrolux, undertake that if, within 12
months of the date of the purchase, this ZANUSSI
ELECTROLUX appliance or any part thereof is proved
to be defective by reason only of faulty workmanship or
materials, we will, at our option repair or replace the
same FREE OF ANY CHARGE for labour, materials or
carriage on condition that:
●
Products of Zanussi Electrolux manufacture which
are NOT marketed by Zanussi Electrolux.
European guarantee
If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:
●
The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
The guarantee starts from the date you first
purchased your product.
●
●
The appliance has been used for normal domestic
purposes only, and in accordance with the
manufacturer’s instructions.
The guarantee is for the same period and to the same
extent for labour and parts as exists in the new
country of use for this brand or range of products.
●
●
The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.
The guarantee relates to you and cannot be
transferred to another user.
●
●
All service work under this guarantee must be
Your new home is within the European Community
(EC) or European Free Trade Area.
●
undertaken by a Service Force Centre.
●
Any appliance or defective part replaced shall
The product is installed and used in accordance with
our instructions and is only used domestically, i.e. a
normal household.
●
become the Company’s property.
●
This guarantee is in addition to your statutory and
other legal rights.
The product is installed taking into account
regulations in your new country.
●
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look
after you and your appliances.
Exclusions
This guarantee does not cover:
France
Germany
Italy
Senlis
+33 (0) 344 62 29 29
+49 (0) 800 234 7378
+39 0434 39 4700
●
Damage or calls resulting from transportation,
Nurnberg
Pordenone
Stockholm
Luton
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
Sweden
UK
+46 (0) 8 672 53 90
+44(0) 8705 727 727
+44 (0)1 4090751
●
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
Ireland
Dublin
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Technical Specifications
DIMENSIONS
Height
Width
Depth
85.cm
60.cm
63 cm
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
230-240 V/50 Hz
2050 W (10A)
WATER PRESSURE
Minimum
Maximum
0.05 MPa (0.5 bar)
0.80 MPa (8.0 bar)
MAXIMUM RECOMMENDED LOAD
Cotton, linen
Synthetics
Delicate fabrics
Wool
5.0 kg
2.5 kg
2.5 kg
2.0 kg
SPIN SPEED
MaximumZ 16 S
1100 rpm ZWF 1111 W
1300 rpm ZWF 1311 W
CONSUMPTION DATA FOR WASHING
5 KG OF COTTONS with “E60°” PROGRAMME
Energy
Water
0.95 kWh
49 litres
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
●
Fill the smaller upper hole and the two large ones with
the corresponding plastic plug caps supplied in the
bag containing the instruction booklet.
The transport safeguard must be removed before
putting the appliance into operation.
Important !
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
●
After removing all the packaging, with assistance
carefully lay machine on it’s back to remove the
polystyrene base from the bottom.
●
Remove the power supply cable and the draining hose
HEC0005
from the hose holders on the rear of the appliance.
HEC0009
Important!
All the different plug caps are supplied with the
appliance in the plastic bag containing the instruction
booklet.
●
Connect the water inlet hose as described under the
paragraph “Water inlet”.
HEC0001
HEC0008
●
●
With a suitable spanner unscrew and remove the
central rear bolt A. Slide out the relevant plastic
spacer.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not
impeded by carpets, rugs etc. Check that the machine does
not touch the wall or other kitchen units.
Unscrew and remove the two large rear bolts B and
the six smaller bolts C.
Never place cardboard, wood or similar materials under the
machine to compensate for any unevenness in the floor.
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to a suitable existing tap with the
drain hose discharging into a sink.
The appliance has an inlet hose, with female 3/4” BSP
thread connector. If this connection is not compatible with
the plumbing of the existing installation, a variety of
connectors are available from good hardware stores and
plumbers merchants to suit most domestic plumbing. Any
alteration to your existing plumbing must be carried out by
a competent person, or qualified plumber.
A
C
B
D
C
B
HEC0002
HEC0003
●
●
Remove the bracket D and tighten up the six smaller
bolts C.
Open the porthole and remove the polystyrene block
fitted with the adhesive tape on the door seal.
Installation on a Suspended Floor
Suspended wooden floors are particularly susceptible to
vibration. To help prevent vibration we recommend you
place a waterproof wood panel, at least 15 mm thick
under the appliance, secured to at least 2 floor beams
with screws. If possible install the appliance in one of
the corners of the room, where the floor is more stable.
HEC0010
HEC0011
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Water inlet
Water drainage
This appliance is designed to be permanently plumbed
into your home's drainage system using one of the
following methods.
An inlet hose is supplied and can been found inside the
machine drum.
Do not use the hose from your previous machine to
connect to the water supply.
1. Into a drainage standpipe.
1. Open the porthole and extract the inlet hose .
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
2. Connect the hose with the angled connection to the
machine.
Important!
Do not place the inlet hose downwards. Angle the
hose to the left or right depending on the position of
your water tap.
U piece
supplied
P1199
Place the drain hose into your standpipe, which should
have an internal diameter of approximately 38mm thus
ensuring there is an air break between the drain hose
and standpipe.
HEC0006
3. Set the hose correctly by loosening the ring nut. After
positioning the inlet hose, be sure to tighten the ring
nut again to prevent leaks.
38 mm (11.2)
standpipe
diameter
4. Connect the hose to a tap with a 3/4” thread. Always
use the hose supplied with the appliance.
HEC0013
When discharging into a standpipe ensure that the top of
the standpipe is no more than 90cm (35.4'') and no less
than 60cm (23.6'') above floor level.
P1088
3 pin
Installation should comply with local water authority
and building regulations’ requirements.
The appliance must be connected to a cold water
supply.
A minimum water pressure of 0.05 MPa (0.5 bar) is
required for safe operation of the appliance.
HEC0012
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
There should be a minimum distance of 5.02m
(16.5 ft) between the appliance’s inlet and the bottom of
the water storage tank.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
If your drain hose looks like this (see below) you do not
If necessary, check the setting with a spirit level.
require the “U” piece”. Just push the hose firmly into
the standpipe.
HEC007
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
P1212
2. Onto a sink outlet spigot.
Some vibration is inevitable, especially if mounted on a
wooden floor.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
Special conditions
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
P1197
Push the drain hose onto the spigot and secure with a
clip if required, ensure a loop is formed in the drain
hose (see diagram) to prevent waste from the sink
entering the washing machine.
Warning
The machine should NOT be placed on deep pile
carpeting.
Note
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
Loop
P1198
In the interest of the environment
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
Important
●
Before connecting the machine to new pipework or
to pipework that has not been used for some time,
run off a reasonable amount of water to flush out any
debris that may have collected in the pipes.
Levelling
If you require any further advice please contact your
local water authority.
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level and
stable.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
- Earth
- Neutral
- Live
Brown
SHOWER
SINK TOILET
BATH
BIDET
GREEN & YELLOW
E
WASHING
MACHINE
DISHWASHER
L
N
RAINWATER
'RUN-OFF'
BROWN
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
FOUL SEWERS
BLUE
CORD CLAMP
P1041
SEWAGE
TREATMENT
WORKS
UNTREATED
DISCHARGE
TREATED
DISCHARGE
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
RIVER
RIVER
P0987
earth symbol
or coloured green and yellow.
The wire coloured blue must be connected to the
terminal marked «N» or coloured black.
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING:
WARNING: THIS APPLIANCE MUST BE
EARTHED.
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely. Should the appliance power supply
cable need to be replaced, this must be carried
out by our Service Force Centre.
The manufacturer declines any liability should
this safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate.
The power supply cable must be easily accessible
after installing the appliance.
The rating plate is located at the top of the rim of the
open door.
Permanent connection
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
P
r o
M
d
N
o d
.
.
. . . . . . . . . .
o
.
. . . . . . . . . . .
S
e
r
.
N
o
. . . . . . . . .
.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042 BD
The switch must not break the yellow and green earth
cable at any point.
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363/A) fuse
must be used.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum
cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150
countries around the world.
© Electrolux plc 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
|