Zanussi Washer WD 1250 W User Manual

WASHER-DRYER  
WD 1250 W  
AQUACYCLE 1200  
DELAY  
W
D
1
2
5
0
W
COTTONS  
EXTRA DRY  
COTTONS  
SYNTHETICS  
90°C  
60°C  
50°C  
40°C  
30°C  
1200  
900  
700  
500  
PREWASH  
STORE DRY  
IRON DRY  
SUPER  
RINSE  
DELICATES  
WOOL  
COTTONS  
SYNTHETICS  
STORE DRY  
N/OF  
SYNTHETICS  
SKIP  
HAND  
RINSE  
HOLD  
EXTRA  
QUICK  
WASH  
XTACAPAIT
D
R
T
A
S
T
E
S
E
T
E
E
A
R
U
T/PA S  
E
R
S
D
M
E
P
RY  
T
I
P
E
R
P
E
E
T
I
O
N
S
S
R
A
T
U
S
R
I
C
GB  
INSTRUCTION BOOKLET  
132992420  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Maintenance and Cleaning  
Descaling  
20-21  
20  
For the User  
After each wash  
Maintenance wash  
External cleaning  
20  
20  
20  
Important Safety Information  
Your New Washer-Dryer  
2
4
Cleaning the dispenser drawer  
Cleaning the drawer recess  
Cleaning the pump  
Cleaning the water inlet filter  
The dangers of freezing  
Emergency emptying out  
20  
20  
20-21  
21  
Description of the Appliance  
5
5
5
5
Door locked light  
Detergent dispenser drawer  
Child safety feature  
21  
21  
The Control Panel  
Operating sequence  
Washing  
Load the laundry  
Measure out the detergent  
Measure out the fabric softener  
Switch the machine on  
Select the required programme/fabric  
Select the temperature  
Select the spin speed or the RINSE HOLD option  
Select the desired options  
Select the DELAY TIME  
6-10  
11-14  
Something Not Working  
Service and Spare Parts  
Guarantee Conditions  
22-23  
23  
11  
11  
11  
11  
11  
11  
12  
12  
12  
12  
12  
13  
13  
24  
For the Installer  
Installation Instructions  
Technical Specifications  
Unpacking  
Positioning  
Water inlet  
Water drainage  
Levelling  
Special conditions  
In the interest of the environment  
Electrical connection  
25  
25  
26  
26  
27  
Start the programme  
How to change a programme during its cycle  
How to cancel a programme during its cycle  
How to open the door during the cycle of  
a programme  
27-28  
28  
13  
13  
28  
28  
29  
End of programme  
Drying 2.5 kg of cotton  
Autodrying 2 kg of synthetics  
14  
14  
Washing and Drying Hints  
Which detergent to use?....  
And in which form?  
15  
16  
16  
Wash Care Symbols  
Washing Programmes  
Drying Programmes  
17  
18  
19  
Guide to use the Instruction Book  
The following symbols will be found in the text to guide you throughout the instructions:  
Safety instructions  
Hints and tips  
Environmental information  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your New Washer-Dryer  
This new machine meets all modern requirements for effective treatment of laundry with low  
water, energy and detergent consumption.  
The special wool programme with its new delicate  
In the interest  
wash system treats your woollens with extreme care.  
of the environment  
The anti-unbalance device ensures that the  
machine remains stable when spinning.  
Materials marked with the symbol  
recyclable.  
are  
Automatic cooling of the wash water to 60°C  
before draining, with the 90°C programme. This  
reduces thermal shock to fabrics, helping to prevent  
creasing.  
Check with your local Council or Environmental  
Health Office to see if there are facilities in your area  
for re-cycling this appliance.  
The ECO valve allows total use of detergent and  
reduces water consumption so saving energy.  
When the appliance is to be scrapped, cut off the  
power supply cable and make the door lock device  
unusable to prevent young children from being  
trapped inside.  
The two drying programmes will give your wash  
that soft, relaxed feel whatever the weather.  
Help to keep your country tidy - use authorised  
disposal sites for your old appliance.  
Ecological hints  
To save water and energy and help protect the  
environment, we recommend that you follow these  
hints:  
How do we help to protect the environment?  
We use recycled paper!  
Adjust the quantity of detergent according to the  
hardness of your water supply, the amount of  
laundry and the degree of soiling.  
Select a “Quick programme for lightly soiled  
laundry.  
A programme without prewash is sufficient for  
normally soiled laundry.  
Try to load the maximum drying capacity of the  
machine as small loads are uneconomical.  
Always load well spun laundry. The higher the spin  
speed, the lower the electricity consumption and the  
shorter the drying times.  
Important  
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.  
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly  
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the  
wash load manually and select a spin programme. For more detailed information see the section headed "Something  
Not Working".  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the Appliance  
1 Detergent dispenser drawer  
2
1
2 Control Panel  
3 Door locked light  
4 Door opening handle  
5 Drain pump  
AQUACYCLE 1200  
DELAY  
WD 1250  
W
COTTONS  
EXTRA DRY  
PREWASH  
COTTONS  
SYNTHETICS  
90°C  
60°C  
50°C  
40°C  
30°C  
1200  
900  
700  
500  
STORE DRY  
IRON DRY  
SUPER  
RINSE  
DELICATES  
WOOL  
COTTONS  
SYNTHETICS  
STORE DRY  
N/OFF  
SYNTHETICS  
SKIP  
EXTRA  
QUICK  
RINSE  
HOLD  
HAND  
WASH  
XTRACAPACITY  
D
R
T
S
T
SE  
A
T
A
R
E
E
R
E
U
S
E
T
/
PA  
S
D
I
T
M
E
P
T
I
R
N
E
E
S
R
Y
P
S
E
R
A
T
U
S
P
O
N
R
I
C
6 Adjustable feet  
3
4
Door locked light  
5
It stays on during the whole programme indicating that  
the door is locked.  
6
When the light goes out, the door can be opened (see  
page 13).  
Detergent dispenser drawer  
Prewash  
Main wash  
Fabric softener  
C0063  
Child safety feature  
This machine incorporates a special child safety feature  
to prevent small children from being trapped inside the  
machine.  
To activate this device, rotate the button (without  
pressing it) inside the door clockwise until the groove is  
horizontal. If necessary use a coin.  
To disable this device and restore the possibility of  
closing the door, rotate the button anti-clockwise until  
the groove is vertical.  
P1131  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Control Panel  
DELAY  
START  
WD 1250 W  
COTTONS  
EXTRA DRY  
PREWASH  
COTTONS  
SYNTHETICS  
1200  
900  
700  
500  
90°C  
60°C  
50°C  
40°C  
30°C  
STORE DRY  
IRON DRY  
SUPER  
RINSE  
DELICATES  
WOOL  
COTTONS  
SYNTHETICS  
STORE DRY  
SKIP  
O
SYNTHETICS  
EXTRA  
QUICK  
RINSE  
HOLD  
HAND  
WASH  
D
T
S
T
R
E
S
T
A
E
R
E
E
E
S
R
T
/P  
U
A
S
M
M
Y
I
E
D
T
R
P
D
E
R
F
T
I
S
E
P
O
N
A
S
E
R
U
S
C
T
A
I
1
2
3
4
5
6
7
8
9 10  
111213  
1 ON/OFF button  
Important!  
Press this button to switch the machine on. The display  
(9) will show three blinking dashes or a blinking zero.  
You will find more detailed explanations on page 7 e 8  
(see “DISPLAY”).  
Press the ON/OFF button again to switch the machine  
off.  
By pressing the TEMPERATURE and SPIN SPEED  
buttons simultaneously for 3 seconds, the acoustic  
signal is deactivated at the end of the cycle, when  
selecting the programmes and in case of an incorrect  
option selection.  
By pressing these 2 buttons again the acoustic signal is  
reactivated.  
2 MAINS-ON light  
This light is connected to the ON/OFF button. It lights  
up when you press the button, and goes out when you  
press it again.  
5 SPIN SPEED button  
Press this button repeatedly to change the spin speed, if  
you want your laundry to be spun at a speed different  
from the one proposed by the machine. The relevant  
light will light up.  
3 FABRICS button  
Maximum speeds are:  
• for cotton: 1,200 rpm;  
• for synthetic fabrics, wool, and fabrics to be hand-  
washed: 900 rpm;  
• for delicate fabrics: 700 rpm.  
Press this button repeatedly to select the programme on  
the basis of the type of laundry to be washed. The light  
relevant to the selected programme will light up. The  
machine will propose a temperature and automatically  
select the maximum spin value provided for the  
programme you have chosen. You can change these  
values by operating buttons 4 and 5.  
RINSE HOLD position : when you choose this  
option, the machine will not drain the water of the last  
rinse, so as not to wrinkle the laundry.  
Hand wash  
At the end of the cycle, the START/PAUSE button light  
will flash, to indicate that the water must be drained and  
a static zero will appear on the display.  
To complete the cycle, choose one of the following  
options:  
When you select this programme, you obtain a  
particularly delicate washing, suitable for articles of  
clothing whose label indicates that they must be hand-  
washed  
.
Draining and spin:  
4 TEMPERATURE button  
- Press the START/PAUSE button. The machine  
will drain the water, then spin the laundry at the  
maximum speed provided for the selected  
programme.  
- Select spin speed by means of button 5, and press  
the START/PAUSE button.  
Press this button repeatedly to increase or decrease the  
temperature, if you want your laundry to be washed at a  
temperature different from the one proposed by the  
machine. The relevant light will light up.  
Maximum temperatures are 90°C for cotton, 60°C for  
synthetic fabrics, 40°C for delicate fabrics, wool and  
fabrics to be hand-washed (HAND WASH programme).  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Drain only  
7 AUTO DRY button  
This button allows you to choose the required degree of  
drying for cottons and synthetics:  
- Press the SKIP/RESET button once, so as to cause  
the DRAIN light  
START/PAUSE button.  
to light up, then press the  
- Extra dry (only for cottons)  
- Store dry (cottons and synthetics)  
- Iron dry (only for cottons)  
Important! If you accidentally press the SKIP/RESET  
button more than once, the display will show three  
blinking dashes. To cause the washing machine to  
drain the water, select any washing programme by  
means of the FABRIC button, then press  
The drying time is automatically adjusted by the  
machine: the laundry will be dried to the selected degree  
of dryness.  
SKIP/RESET three times in order to select the  
DRAIN position (only the DRAIN light will remain  
lit).  
The RINSE HOLD option cannot be selected for the  
automatic WASHING & DRYING programme.  
8 DRYING TIME button  
By depressing this button you can select a timed  
programme for cotton or synthetics, the relevant light  
illuminates. To select “cottons” you have to push the  
button for about 2 seconds. To select the drying time  
push the button until the time you want appears in the  
display according to the fabrics (cotton or synthetics)  
you have to dry.  
6 OPTIONS button  
Press this button to select the following options:  
PREWASH: select this option if you wish your  
laundry to be prewashed before the main wash (not  
available for wool and hand-wash cycle).  
The prewash ends with a short spin at 650 rpm in  
programmes for cotton and synthetic fabrics, whereas  
in the programme for delicate fabrics the water is only  
drained.  
- For COTTON you can select a drying time from 10  
minutes to 130 minutes (2 .10).  
- For SYNTHETICS you can select a drying time from  
10 minutes to 100 minutes (1.40).  
Every time you press the button the time increases by  
5 mins.  
SUPER RINSE: this option can be selected with all  
programmes except the wool and handwash  
programme. The machine performs 4 rinses instead  
of 3. This option is recommended for people who are  
allergic to detergents, and in areas where the water is  
very soft.  
9 Display  
The following pieces of information are shown on the  
display:  
Three blinking dashes, when a programme is  
cancelled by means of the SKIP/RESET button.  
EXTRA QUICK: select this option for laundry that is  
only slightly soiled (not for wool and HAND WASH  
programme).  
The washing time will be reduced according to the  
type of fabric and the selected temperature.  
The three blinking dashes will also appear when you  
press the ON/OFF button to switch the machine on, if  
the previously selected cycle has been erased.  
The PREWASH and EXTRA QUICK options cannot  
be selected together.  
---  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important!  
Duration of washing programme in hours  
and minutes, after you have selected a programme.  
The first time you use the machine, when you switch  
it on, it may display a blinking zero and give an audible  
warning signal. This is due to the fact that the machine  
has performed a washing cycle during the  
manufacturer’s inspection tests, and this cycle has not  
been erased after its completion.  
2.05  
Delay start, a time value indicated in hours and  
selected by means of the relevant button.  
While the programme is running (after you have  
pressed the START/PAUSE button), the displayed  
time value decreases by one unit every minute.  
Selected drying time in minutes or hours and  
minutes.  
The delay time is displayed for 3 seconds, then the  
duration of the selected programme reappears.  
After you have pressed the START/PAUSE button, the  
countdown begins, and the delay time value decreases  
by one unit every hour.  
1.25  
You can delay the start of the selected programme by  
up to 24 hours in one hour intervals.  
After the programme has started the time remaining is  
updated every minute.  
An incorrect option selection has been made: this is  
indicated by the message Err when a function  
incompatible with the current programme is selected.  
The washing machine has stopped with water in  
the tub, at the end of a programme with the RINSE  
HOLD option: this is indicated by a static zero.  
The washing machine has completed the  
programme: this is indicated by a blinking zero. At  
the same time, the door locked light goes out. The  
zero will reappear when you switch the washing  
machine on, unless the previous programme has been  
erased by means of the SKIP RESET button.  
The incorrect selection is also indicated by an audible  
warning signal.  
An alarm code indicates a fault in the machine  
operation (see the relevant chapter on page 22-23).  
0
E20  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 START/PAUSE button  
This button has three functions:  
PREWASH  
WASH  
RINSES  
SPIN  
Start: after you have selected the desired programme  
and options, press this button to start the machine. The  
light above the button will stop flashing and remain lit.  
DRAIN  
If you have selected a delay time by means of button  
12, the countdown will begin and will be shown on  
the display.  
DRYING  
To select rinse & spin, press the SKIP button once, the  
wash LED goes out.  
Pause: when you press this button again, the  
programme in progress is interrupted. The light above  
the button will start flashing. To restart the  
programme, press the button again.  
Important! You must set the washing machine to  
PAUSE before you make any change in the programme  
in progress.  
Draining of water and spinning after the execution  
of programmes with the RINSE HOLD option.  
To select spin only, press the SKIP button twice.  
The wash & rinse LED,s go out.  
11 SKIP/RESET button  
This button performs two functions:  
- Clears the memory  
- Selects special programmes  
At the end of every programme the RESET button must  
be pressed once or repeatedly to clear the programme  
memory. This will be confirmed by three dashes,  
flashing in the display.  
If the previous programme is not cleared, the display  
will show a “0” flashing and an audible signal will  
sound, when you switch the machine on.  
To select Drain press the SKIP button three times, the  
wash - rinse - spin LED,s go out.  
Selecting a special programme:  
A wash programme must be selected in the normal way.  
(START button not pressed)  
S
E
S
T
A
U
R
A
/
P
T
If you wish to cancel or advance the running  
programme to the required phase, PAUSE the cycle and  
then press the SKIP button as previously described.  
A normal wash cycle consists of the following phases,  
Wash - Rinses - Spin and is confirmed by the  
illumination of the corresponding LED,s.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 DELAY START button  
13 Programme phase indicator  
lights  
When you select a programme, the lights relevant to the  
phases that form the programme light up.  
This button makes it possible to delay the starting of the  
programme by up to 24 hours. The delay you have  
selected is shown on the display for about 3 seconds;  
afterwards, the duration of the programme reappears.  
You must select this option after you have set the  
programme and before you press the START/PAUSE  
button.  
The time value shown on the display will decrease by  
one unit every hour.  
You can change the delay time at any moment,  
before you press the START/PAUSE button.  
If you have already pressed the START/PAUSE button,  
and you wish to change or cancel the delay time,  
proceed as follows:  
After you have started the programme, only the light  
relevant to the phase that is currently being carried out  
will remain lit.  
• set the machine to PAUSE by pressing the  
START/PAUSE button;  
• press the DELAY START button until the display  
shows the desired delay time or  
• press the DELAY START button once, to erase the  
delay time. The display will indicate “0 h”.  
• press the START/PAUSE button again.  
Important!  
The door will be locked throughout the delay time  
(DOOR LOCKED light lit).  
If you need to open the door, you must first set the  
machine to PAUSE by pressing the START/PAUSE  
button. After you have closed the door, press the  
START/PAUSE button again.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Sequence  
WASHING  
4. Switch the machine on  
Press the ON/OFF button to switch the machine on. The  
display will show three blinking dashes or a blinking  
zero. The light above the button will light up.  
Before the first wash we recommend that you pour 2  
litres of water into the main wash compartment  
the detergent drawer in order to activate the  
ECO valve. Then run a cotton cycle at 60°C, with the  
machine empty, in order to remove any manufacturing  
residue from the drum and tub.  
of  
/
F
0
Pour half a measure of detergent into the main wash  
compartment and start up the machine.  
---  
1.Load the laundry  
Open the door.  
Place the laundry in the drum, one item at a time,  
shaking them out as much as possible.  
5. Select the desired programme/  
fabric  
Press the FABRICS button repeatedly, in order to select  
the desired programme/fabric. The relevant light will  
light up.  
Close the door.  
The lights relevant to the phases that form the  
programme will light up.  
The display will show the duration of the selected  
programme, calculated on the basis of the maximum  
load for each type of fabric. The START/PAUSE button  
light will start flashing.  
P0004•N  
If the load of laundry to be washed is small, at the  
beginning of the cycle the display will still indicate the  
duration relevant to the maximum load. The duration  
value will be gradually adjusted during the execution of  
the cycle.  
2.Measure out the detergent  
Pull out the dispenser drawer until it stops. Measure out  
the amount of detergent required and pour it into the  
main wash compartment  
If you wish to carry out the prewash, pour detergent into  
the appropriate compartment marked  
.
.
COTTONS  
SYNTHETICS  
DELICATES  
WOOL  
3.Measure out the fabric  
softener  
If required, pour fabric softener into the compartment  
marked , without exceeding the «MAX» mark.  
HAND  
WASH  
F
S
A
C
I
R
C0064  
C0065  
Close the drawer gently.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Select the temperature  
Press the TEMPERATURE button if you wish to select  
a temperature value different from the one proposed by  
the machine.  
9. Select the DELAY START  
Before you start the programme, if you wish the  
starting to be delayed, press the DELAY START button  
repeatedly, or keep it pressed, to select the desired delay.  
The selected delay time value (up to 24 hours) will  
appear on the display for 3 seconds, then the duration of  
the programme will appear again.  
The relevant light will light up.  
90°C  
60°C  
50°C  
40°C  
30°C  
DELAY  
START  
T
E
U R  
T
E
A
R
7. Select the spin speed or the  
RINSE HOLD option  
Press the SPIN SPEED button repeatedly, in order to  
select the desired spin speed or the RINSE HOLD  
option. The relevant light will light up.  
If you select the RINSE HOLD option, the machine will  
stop at the end of the programme with the water still in  
the tub.  
10. Start the programme  
Press the START/PAUSE button. The relevant light will  
stop flashing, the DOOR LOCKED light will light up,  
and only the light relevant to the phase that is in  
progress will remain lit.  
If you have chosen a delayed start, the washing machine  
will begin the countdown.  
The display will show the duration of the programme or  
the selected delay.  
1200  
900  
700  
500  
RINSE  
HOLD  
S
D
P
E
I
E
P
S
S
E
S
T
A
U
R
A
/
P
T
8. Select the desired options  
If your laundry is very dirty, it may be advisable to  
select the PREWASH option.  
If you wish the laundry to undergo an extra rinse , select  
the SUPER RINSE option.  
If your laundry is only slightly soiled, select the EXTRA  
QUICK option.  
The relevant light illuminates.  
ASH  
PREW  
SUPER  
RINSE  
EXTRA  
QUICK  
S
P
N
T
I
O
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After approximately 3 minutes, you can open the door.  
11. How to change a programme  
during its cycle  
Before you make any change, you must pause the  
machine by pressing the START/PAUSE button.  
It is possible to change any phase before the programme  
carries it out.  
Pay attention to the level and temperature of the  
water in the machine!  
When you close the door and press the ON/OFF button  
again, the machine will resume the programme from the  
point where it had been interrupted.  
Changing the type of fabric or temperature is possible,  
obviously, only during the washing phase. When you  
make a change in these two parameters, the machine  
will resume the cycle from the beginning.  
14. End of programme  
At the end of the programme, the machine stops  
automatically, gives an audible signal, and displays a  
blinking zero.  
If it is necessary to drain the water in order to change the  
programme in progress, proceed as follows:  
If you had selected the RINSE HOLD option, the  
START/PAUSE button light flashes to indicate that the  
water must be drained. The display shows a steadily lit  
zero.  
When the programme has been completed, a blinking  
zero appears on the display and the audible signal is  
given.  
PAUSE the machine by pressing the START/PAUSE  
button;  
• press the SKIP/RESET button repeatedly, until only  
the DRAIN light  
remains lit;  
• press the START/PAUSE button again.  
When the water has been drained, the display shows a  
blinking zero. You may now select a new programme  
and press the START/PAUSE button to start it.  
The DOOR LOCKED light goes out at once.  
Press the SKIP/RESET button repeatedly to erase  
the programme that has just been carried out. If you  
omit to do this, the next time you switch the machine  
on, the blinking zero will appear on the display and  
you will hear the audible signal.  
12. How to cancel a programme  
during its cycle  
Note: when you switch the machine on, if you must  
erase the previously performed programme, it is also  
sufficient to press the FABRICS button and select a new  
programme.  
To cancel a programme that is being carried out, first  
pause the machine by pressing the START/PAUSE  
button, then press the SKIP/RESET button repeatedly,  
until the display shows three blinking dashes.  
Press the ON/OFF button to switch the machine off. The  
relevant light will go out.  
13. How to open the door during  
the cycle of a programme  
You can open the door, after having set the machine to  
PAUSE, provided the following conditions exist:  
Remove the laundry from the machine.  
Check whether the drum is completely empty, by  
rotating it with your hand. The purpose of this is to  
prevent any items of laundry from remaining  
accidentally in the drum, where they might get damaged  
in a subsequent wash (e.g. by shrinking) or bleed colour  
into another load of laundry.  
• the washing machine is not in the heating phase  
beyond 55°C;  
• the level of the water is not high;  
• the drum is not turning.  
We advise you to close the water supply tap and  
disconnect the plug from the socket.  
If these requirements are met, when you pause the  
machine, the DOOR LOCKED light goes out and the  
door can be opened.  
Leave the door ajar in order to air the machine.  
Should it not be possible to open the door, and should it  
be absolutely necessary to do so, switch the machine off  
by pressing the ON/OFF button.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. At the end of the programme press SKIP/RESET  
button to clear the memory and switch the machine  
off by depressing ON/OFF button.  
DRYING 2.5 KG OF COTTON  
You have for example just machine-washed and spun at  
1200 rpm 5 kg (11 lb) of laundry.  
They are cotton fabrics of medium weight which you  
want to iron as soon as they are dry.  
6. Remove the laundry.  
Note:  
Press the SKIP/RESET button repeatedly to erase the  
programme that has just been carried out,  
will show in the display and switch the  
The programme time will automatically increase by up  
to 1 minute, this is quite normal.  
---  
machine off by depressing ON/OFF button.  
Then remove the laundry from the appliance and divide  
the items to obtain two loads of approx. 2.5 kg (5.5 lb)  
each.  
AUTODRYING 2 KG OF SYNTHETICS  
You intend to wash and dry automatically 2 kg (4.4 lb)  
of synthetics which do not need ironing.  
The water tap must be open and the drain hose must be  
positioned in the sink or connected to the drain pipe.  
Do not use a dosing device/ball when carrying out a  
washing & drying programme.  
1. Load the laundry.  
2. Depress the ON/OFF button to switch the machine  
1. Load the laundry.  
on, --- will show in the display.  
2. Add detergent and fabric softener.  
3. If you wish to carry out the electronic drying,  
depress AUTO DRY button until the light IRON  
DRY illuminates.  
3. Switch the machine on by depressing the ON/OFF  
button  
.
4. Select the wash programme/fabric and temperature.  
5. Select the drying time or degree of drying.  
COTTONS  
EXTRA DRY  
STORE DRY  
6. Select the required options by means of the relevant  
buttons. If possible, do not select a spin speed lower  
than that proposed by the appliance to avoid a too  
long drying time so saving energy.  
IRON DRY  
SYNTHETICS  
STORE DRY  
A
In any case the reduction of the spin speed is only  
possible after selecting drying. The lowest values  
you can select are the following:  
- 900 r.p.m. for cottons & synthetics with electronic  
drying  
U
Y
R
If you want a timed drying, depress the DRYING  
TIME button until the light COTTONS lights up, then  
depress the same button until the time you want appears  
on the display.  
- 900 r.p.m. for cottons and 700 r.p.m. for synthetics  
with timed drying  
7. Start the programme by depressing the  
START/PAUSE button.  
55  
8. At the end of the programme press the  
COTTONS  
SKIP/RESET button to clear the memory and press  
SYNTHETICS  
the ON/OFF button again to switch the machine off.  
9. Remove the laundry.  
D
R
E
M
I
T
4. Press the START/PAUSE button to start the  
programme.  
S
E
S
T
A
U
R
A
/
P
T
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing and Drying Hints  
Do NOT overload the machine. Weigh the laundry the  
Some stains such as fruit, wine, grass, rust etc. are  
first few times you use the appliance.  
difficult to remove and should be treated before  
washing with specific products, which can be found  
in most household shops. In some cases it may help  
to soak the stain before washing with a special pre-  
soak product or biological detergent.  
The average weights of the most common items are  
listed below as a guide:  
1000g = 1 kg  
If you have used the machine to wash, rinse or spin  
only non-colour fast garments, there may be dye left  
in the sump. To ensure any subsequent wash is not  
contaminated with the dye, select and carry out a  
rinse and spin programme, without any garments, to  
ensure that any dye is removed from the sump.  
Sheet  
700-1000 g  
100-200 g  
400-500 g  
50-100 g  
Pillow case  
Tablecloth  
Serviette  
Do not leave the damp laundry load in a heap too  
long before drying.  
Tea towel  
70-120 g  
Linen hand towel  
Towelling hand towel  
Towelling bath towel  
Bath robe  
100-150 g  
150-250 g  
700-1000 g  
1000-1500 g  
200-300 g  
150-200 g  
Avoid drying dark clothes with light coloured fluffy  
items such as towels as these can attract the fluff.  
If you overdry the laundry, besides wasting energy,  
any subsequent ironing may become more difficult  
because the fabric could be heavily crumpled.  
Man’s shirt  
Apron  
Remove the laundry when the appliance has finished  
drying.  
To avoid a static charge when drying is completed,  
use either a fabric softener when you are washing the  
laundry or a fabric conditioner specifically for  
tumble dryers.  
Load the laundry loosely alternating large items with  
small ones.  
Particularly delicate items such as synthetic curtains,  
woollen and silk, garments with metal inserts, nylon  
stockings, bulky garments such as anoraks,  
bedcovers, quilts, sleeping bags and duvets must not  
be machine dried.  
Sort the laundry according to the type of fabric,  
colour-fastness and how dirty it is.  
Avoid washing unhemmed or torn items as they may  
unravel.  
Before washing, empty all pockets of small objects  
which may have been left inside (coins, keys, screws  
etc). as these could damage the drain pump.  
Garments padded with foam-rubber or materials  
similar to foam-rubber must not be machine dried;  
they represent a fire hazard.  
When washing curtains, remove the hooks.  
Also, fabrics containing residues of setting lotions or  
hair sprays, nail solvents or similar solutions must  
not be machine dried in order to avoid the formation  
of harmful vapours.  
Close poppers and zips and fasten loose buttons.  
It is essential to wash new coloured items separately  
when washing for the first time.  
For drying, follow the indications given on the  
manufacturer’s labels.  
When washing fabrics requiring different wash  
temperatures together, always select the lowest  
temperature.  
May be tumble dried  
White items should not be washed with coloured  
items.  
Drying at high temperature  
Drying at reduced temperature  
Do not tumble dry  
Very small items (handkerchiefs, ribbons, socks etc)  
should be washed in a washing bag or a pillow case.  
Use a good quality detergent suitable for automatic  
washing machines.  
Important:  
As a dryer, the machine works on the condensation  
principle.  
Use the correct quantities of detergent.  
For wool, use gentle detergent only in small  
quantities.  
Therefore, the water tap must be open and the  
drain hose must drain water into a sink or into  
the drain pipe, even during the drying cycle.  
Bleach is very corrosive; it should be used with care  
and kept out of reach of children.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
And in which form?  
Not only are there different types of detergent, but they  
are also available in different forms. Whether you chose  
a powder or liquid in traditional or compact form is  
your own personal choice.  
Which detergent?....  
To ensure you obtain the best wash results from your  
appliance, it is important to use the right detergent in  
your everyday wash, and only detergents recommended  
for use in automatic machines.  
To maintain the appearance of your clothes and  
household textiles and to make them last longer you  
should use different types of detergent for different  
washes, whether for whites, colours or delicates.  
TRADITIONAL POWDERS  
Pour the powder directly into the dispenser drawer. Do  
not sprinkle powder onto clothes in the machine drum.  
TRADITIONAL LIQUIDS  
Liquid can be placed in the main wash compartment of  
the detergent drawer marked with the symbol  
the machine immediately upon placing the  
detergent in the dispenser drawer.  
WHITES  
We recommend the Ariel product  
range which is biological and  
designed to provide excellent  
cleaning and stain removal even  
at low temperatures.  
, start  
Alternatively the detergent is measured into the  
specially designed dosing device* which should be  
placed on top of the laundry, and at the back of the  
machine drum.  
NON BIOLOGICAL  
If you prefer to use a non  
biological detergent, which does  
not contain enzymes we  
recommend Fairy. Fairy provides  
good cleaning and stain removal.  
COMPACT POWDERS AND LIQUIDS  
Compact detergents (or concentrates as they are also  
known) are available in liquid or powder form, and  
generally require a smaller dosage. Follow the  
manufacturer’s instructions to ensure the most  
economical usage. Pour the detergent directly into the  
dispenser drawer, or alternatively measure the detergent  
into the specially designed dosing device* which  
should be placed on top of the laundry, and at the back  
of the machine drum.  
COLOUREDS  
For coloured items you should use a  
detergent which is designed to clean  
while maintaining the original colour.  
Ariel Color does not contain bleach  
and therefore helps to preserve  
colours.  
* If you use a dosing device in a washer dryer,  
please ensure the dosing device/ball is removed  
before carrying out a drying programme.  
DELICATE ITEMS  
FABRIC CONDITIONERS  
These are ideal for improving ‘softness’, and also  
reduce static cling on synthetics and make ironing  
easier. They are available in two types:  
When washing delicates such as  
woollens, you should use a product  
which is specially designed to care for  
fine fabrics.  
Dreft Automatic is suitable for  
woollens and other delicates.  
For example Lenor liquid fabric  
softener, for use in the washing  
machine/washer dryer. The  
liquid fabric softener should be  
poured into the compartment  
LAUNDRY BLEACH  
For additional stain removal you may  
wish to use a product such as Ace  
Gentle Bleach which is used in addition  
to your chosen detergent. Ace is  
suitable for all washable fabrics  
including silks, woollens and coloureds.  
marked with the symbol  
.
Follow the manufacturer’s dosage  
instructions and never exceed the  
MAX level.  
Bounce conditioning sheets for use  
in a tumble dryer. We recommend  
the conditioning sheets are pinned  
(using a safety pin) to an article  
of laundry and placed in the  
tumble dryer.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wash Care Symbols  
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling  
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct  
programme on your washing machine.  
WASHING SYMBOL  
WASH ACTION  
FABRIC  
White Cotton or Linen  
without Special Finishes  
Normal (Maximum)  
95  
Cotton, Linen or Viscose  
without Special Finishes  
Colourfast at 60°C.  
Normal (Maximum)  
60  
50  
Nylon, Polyester/Cotton, Viscose  
with Special Finishes,  
Cotton/Acrylic Mix.  
Reduced (Medium)  
Normal (Maximum)  
Cotton, Linen or Viscose  
Colourfast at 40°C but not 60°C.  
40  
40  
40  
Acrylics, Acetate, Triacetate, Wool  
mixes, Polyester/wool blends.  
Reduced (Medium)  
Much Reduced (Minimum)  
Hand wash only  
Wool, wool mixtures, Silks  
Do not machine wash  
BLEACHING  
Chlorine bleach may be used  
IRONING  
Cotton, Linen, Viscose  
Polyester mixtures, Wool  
Acrylic, Nylon, Polyester  
Hot iron  
Warm iron  
Cool iron  
DRY CLEANING  
May be dry cleaned. Other letters and/or a bar beneath the circle will  
indicate the required process to the dry cleaner.  
TUMBLE DRYING  
with high heat setting  
with low heat setting  
May be tumble dried  
A cross through any symbol means «DO NOT»  
X
Important Notes  
For best results, always use the dispenser drawer for  
dispensing detergents and liquid additives.  
fabric conditioner to avoid the conditioner entering the  
machine prematurely.  
When using liquid detergent and a prewash programme,  
place the detergent into the correct compartment in the  
dispenser drawer, after the prewash has finished.  
Once the dispenser has been filled, close it by pushing it  
in gently. This is particularly important if you are using  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing programmes  
Type of  
Consumption*  
laundry and  
symbols on  
labels  
Programme/ Description of  
Load  
Available options  
Energy  
kWh  
Water  
litres  
Time  
h/min.  
temperature  
programme  
60  
95  
5 kg  
Cottons  
60°-90°C  
Main wash at  
60°-90°C  
3 rinses  
SPIN SPEED  
RINSE HOLD  
PREWASH  
SUPER RINSE  
QUICK WASH  
1.9  
52  
2.19  
White cotton:  
e.g. sheets,  
tablecloths,  
household  
linen  
Long spin  
60  
40  
30  
5 kg  
SPIN SPEED  
RINSE HOLD  
PREWASH  
SUPER RINSE  
QUICK WASH  
Cottons  
Main wash at  
60°-50°-40°- 60°-50°-40°-  
0.95  
49  
2.14  
Coloured  
cotton: e.g.  
shirts, blouses,  
underwear,  
towels, house-  
hold linen  
30°C  
30°C  
3 rinses  
Long spin  
50  
60  
40  
30  
0.90  
0.40  
47  
45  
1.33  
1.06  
2.5 kg  
2.5 kg  
SPIN SPEED  
RINSE HOLD  
PREWASH  
SUPER RINSE  
QUICK WASH  
Main wash at  
60°-50°-40°-  
30°C  
3 rinses  
Short spin  
Synthetics  
60°-50°-40°-  
30°C  
Synthetic  
fabrics and  
blends: e.g.  
shirts, blouses,  
underwear  
40  
30  
SPIN SPEED  
RINSE HOLD  
PREWASH  
Main wash at  
40°-30°C  
3 rinses  
Delicates  
40°-30°C  
Delicate fab-  
rics: e.g.  
acrylic fabrics,  
viscose, poly-  
ester, synthetic  
blends  
SUPER RINSE  
QUICK WASH  
Short spin  
40  
30  
SPIN SPEED  
RINSE HOLD  
0.40  
0.40  
46  
46  
54  
57  
2 kg  
2 kg  
Main wash at  
40°-30°C  
3 rinses  
Wool  
40°-30°C  
Wool  
Short spin  
Hand wash  
40°-30°C  
SPIN SPEED  
RINSE HOLD  
Main wash at  
40°-30°C  
3 rinses  
Short spin  
The “coloured cotton programme” at 60°C is the reference programme for the data entered in the energy label, in  
compliance with EEC 92/75 standards.  
* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of  
laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature  
provided for each programme.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Drying Programmes  
Timed drying  
Degree of drying  
Type of fabric  
Max. load  
Spin speed  
Drying time mins  
80-90  
75-85  
70-80  
60-70  
1200  
1300  
1400  
1200  
2.5 kg  
1.5 kg  
2.5 kg  
1.5 kg  
Extra dry  
Ideal for  
towelling  
materials  
Cotton and linen  
(bathrobes, bath  
towels, etc.)  
1300  
1400  
55-65  
50-60  
1200  
1300  
1400  
1200  
70-80  
65-75  
60-70  
50-60  
Cotton and linen  
(towels, T-shirts,  
bathrobes)  
Store dry (*)  
Suitable for items  
to put away  
1300  
1400  
45-55  
40-50  
without ironing  
Synthetics and mixed  
fabrics (jumpers,  
blouses, underwear,  
household linen)  
2 kg  
1 kg  
900  
70-80  
900  
35-45  
55-65  
1200  
2.5 kg  
1.5 kg  
1300  
1400  
1200  
1300  
1400  
50-60  
45-55  
45-55  
40-50  
35-45  
Iron dry  
Suitable for  
ironing  
Cotton and linen  
(sheets, tablecloths,  
shirts, etc.)  
(*) The STORE DRY drying programme for cotton is the reference programme for the Energy Label data, in  
compliance with EC directive 92/75.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Cleaning  
Before any maintenance or cleaning is carried out you  
must DISCONNECT the appliance from the electricity  
supply.  
Descaling  
The water we use normally contains lime. It is a good  
idea to periodically use a water softening powder in the  
machine. Do this separately from any laundry washing,  
C0068  
P1086  
and according to the softening powder manufacturer's  
instructions. This will help to prevent the formation of  
lime deposits.  
Cleaning the drawer recess  
Having removed the drawer, use a small brush to clean  
the recess, ensuring that all washing powder residue is  
removed from the upper and lower part of the recess.  
Replace the drawer and run the rinse programme  
without any clothes in the drum.  
After each wash  
Leave the door open for a while. This helps to prevent  
mould and stagnant smells forming inside the appliance.  
Keeping the door open after a wash will also help to  
preserve the door seal.  
Maintenance Wash  
With the use of low temperature washes it is possible to  
get a build up of residues inside the drum.  
We recommend that a maintenance wash be performed  
on a regular basis.  
P0038  
To run a maintenance wash:  
Cleaning the pump  
The drum should be empty of laundry.  
The pump should be inspected if  
Select the hottest cotton wash programme.  
• the machine does not empty and/or spin  
• the machine makes an unusual noise during draining  
due to objects such as safety pins, coins etc. blocking  
the pump.  
Use a normal measure of detergent, must be a  
powder (such as Ariel Futur).  
External cleaning  
Clean the exterior cabinet of the appliance with soap and  
water only, and then dry thoroughly.  
Proceed as follows:  
• Disconnect the appliance.  
• If necessary wait until the water has cooled down.  
• Open the pump door.  
Cleaning the dispenser drawer  
The washing powder and additive dispenser drawer  
should be cleaned regularly.  
Remove the drawer by pressing the catch downwards  
and by pulling it out. Flush it out under a tap, to remove  
any traces of accumulated powder.  
To aid cleaning, the top part of the additive compartment  
should be removed.  
P1095  
• Place a container close to the pump to collect any  
spillage.  
• Pull out the emergency emptying hose, place it in the  
container and remove its cap.  
C0067  
C0066  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clean the filter using a hard bristle brush.  
Tighten up the inlet hose.  
• When no more water comes out, unscrew the pump  
cover and remove it. Always keep a rag nearby to dry  
up spillage of water when removing the cover.  
P1090  
P1096  
The dangers of freezing  
Remove any objects from the pump impeller by  
rotating it.  
If the machine is exposed to temperatures below 0°C,  
certain precautions should be taken.  
Turn off the water tap.  
Unscrew the inlet hose.  
Place the end of the emergency emptying hose and  
that of the inlet hose in a bowl placed on the floor  
and let water drain out.  
Screw the water inlet hose back on and reposition  
P1097  
the emergency emptying hose after having put the  
cap on again.  
• Put the cap back on the emergency emptying hose and  
place the latter back in its seat.  
When you intend to start the machine up again,  
make sure that the room temperature is above 0°C.  
Important!  
Every time you drain the water through the emergency  
emptying hose you must pour 2 litres of water into the  
main wash compartment of the detergent drawer and  
then run the drain programme. This will activate the  
ECO valve avoiding that part of the detergent remains  
unused at next washing.  
P1098  
• Screw the pump cover fully in.  
• Close the pump door.  
Emergency emptying out  
If the water is not discharged, proceed as follows to  
empty out the machine:  
Warning  
• pull out the plug from the power socket;  
• close the water tap;  
When the appliance is in use and depending on the  
programme selected there can be hot water in the pump.  
Never remove the pump cover during a wash cycle,  
always wait until the appliance has finished the cycle,  
and is empty. When replacing the cover, ensure it is  
securely retightened so as to stop leaks and young  
children being able to remove it.  
• if necessary, wait until the water has cooled down;  
• open the pump door;  
• place a bowl on the floor and place the end of the  
emergency emptying hose into the bowl. Remove its  
cap. The water should drain by gravity into the bowl.  
When the bowl is full, put the cap back on the hose.  
Empty the bowl. Repeat the procedure until water  
stops flowing out;  
Cleaning the water inlet filter  
If your water is very hard or contains traces of lime  
deposit, the water inlet filter may become clogged.  
• clean the pump if necessary as previously described;  
It is therefore a good idea to clean it from time to time.  
Turn off the water tap. Unscrew the water inlet hose.  
• replace the emergency emptying hose in its seat after  
having plugged it;  
• screw the pump cover again and close the door.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Something Not Working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without  
calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed  
below.  
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or  
installation, a charge will be made even if the appliance is under guarantee.  
During machine operation it is possible that one of the following alarm codes appears on the display:  
- E10 : problem with the water supply  
- E20 : problem with water draining  
- E40 : door open  
Once the problem has been eliminated, press the START/PAUSE button  
to restart the programme. If after all  
checks, the problem persists, contact your local Service Force Centre.  
Symptom  
Possible causes  
The machine does not start  
The door has not been closed. (E40)  
The plug is not properly inserted in the power socket.  
There is no supply at the socket.  
The main fuse or the fuse in the plug has blown.  
The START/PAUSE button has not been depressed.  
The DELAY START option has been selected.  
The water tap is closed. (E10)  
The machine does not fill  
The filter in the inlet hose is blocked. (E10)  
The inlet hose may be squashed or kinked. (E10)  
The door has not been closed. (E40)  
The machine fills then empties  
immediately  
The end of the drain hose is too low.  
The end of the drain hose is submerged in water.  
There is no vent in the end of the drain hose.  
The machine does not empty and/or  
does not spin  
The drain hose may be squashed or kinked. (E20)  
The RINSE HOLD option has been selected.  
The drain pump may be blocked. (E20)  
The drain hose extension, if fitted, is not correct. Follow the  
instructions for connecting to the waste.  
The drainage system pipes are blocked.  
The wash load is unbalanced: redistribute the clothes inside the drum to  
allow the machine to spin.  
There is water on the floor  
Too much detergent or unsuitable detergent has been used (creates too  
much foam).  
Check whether there are any leaks from the inlet hose fittings. It is not  
always easy to see this as the water runs down the hose; check to see if  
it is damp.  
The drain hose may be damaged or not securely positioned.  
The detergent dispenser drawer or recess is clogged.  
The drainage system pipes are blocked.  
The cap on the emergency emptying hose has not been replaced after  
cleaning the pump.  
Unsatisfactory washing results  
Too little detergent or unsuitable detergent has been used. An  
insufficient amount of detergent leaves the laundry looking grey and  
causes lime scale to form.  
Stubborn stains have not been treated prior to washing  
The correct wash programme/temperature has not been selected.  
Too much laundry has been placed in the drum.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Possible causes  
The machine vibrates when spinning  
The internal packing has not been removed.  
The machine is in contact with the wall or furniture.  
The machine is not level and stable (check diagonally).  
The washing load is badly distributed in the drum.  
Maybe there is very little laundry in the drum.  
The door will not open  
The water level is above the bottom edge of the door.  
The machine is heating the water or drying the clothes.  
The drum is turning.  
The door can only be opened when the relevant light has gone out.  
The electronic unbalance detection device has cut in because the  
Spinning starts late or the machine  
does not spin  
laundry is not evenly distributed in the drum. The laundry is  
redistributed by reverse rotation of the drum. This may happen several  
times before the unbalance disappears and normal spinning can resume.  
If, after few minutes, the laundry is still not evenly distributed in the  
drum, the machine will spin at a lower spin or will not spin. In this  
case, redistribute the load manually and select the spin programme.  
The machine makes an unusual  
noise  
The machine is fitted with a type of motor which makes an unusual  
noise compared with other traditional motors. This new motor ensures  
a softer start and more even distribution of the laundry in the drum  
when spinning, as well as increased stability of the machine.  
No water is visible in the drum  
Machines based on modern technology operate very economically  
using very little water without affecting performance.  
The machine does not dry or does  
not dry properly  
The drying time or degree of drying has not been selected  
The water tap is not turned on (E10)  
The drain pump is clogged (E20)  
The machine is overloaded  
The selected drying time or degree of dryness was not suitable for the  
laundry  
Before calling out an engineer, please ensure you have  
read the details under the heading “Something Not  
Working”.  
Service & Spare Parts  
In the event of your appliance requiring service, or if  
you wish to purchase spare parts, please contact your  
local Service Force Centre by telephoning:  
When you contact the Service Force Centre you will  
need to give the following details:  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of fault  
4. The model and serial number of the appliance (found  
on the rating plate - see picture)  
0870 5 929929  
Your telephone call will be automatically routed to the  
Service Force Centre covering your post code area.  
For the address of your local Service Force Centre and  
further information about Service Force, please visit the  
For Customer Service in Ireland please contact us at the  
address below:  
5. The purchase date.  
Please note that a valid purchase receipt or  
guarantee documentation is required for in-  
guarantee service calls.  
Zanussi Electrolux  
Electrolux Group (Irl) Ltd  
Long Mile Road  
Dublin 12  
P
r
M
o
d
o
d
.
N
.
.
.
o
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
S
.
.
e
.
.
r
.
.
N
o
.
.
.
.
.
.
.
.
.
.
Republic of Ireland  
Tel: +353 (0)1 4090751  
Mod. ..........  
Prod. No. ...........  
Ser. No. .........  
P0042 BD  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customer Care Department  
Zanussi Electrolux  
55-77 High Street  
Slough  
Berkshire  
SL1 1DZ  
Customer Care Department  
For general enquiries concerning your Zanussi  
Electrolux appliance or for further information on  
Zanussi Electrolux products, please contact our  
Customer Care Department by letter or telephone at the  
Tel 08705 727727*  
* calls to this number may be recorded for training  
purposes.  
Guarantee Conditions  
Appliances found to be in use within a commercial  
environment, plus those which are subject to rental  
agreements.  
Standard guarantee conditions  
We, Zanussi Electrolux, undertake that if, within 12  
months of the date of the purchase, this ZANUSSI  
ELECTROLUX appliance or any part thereof is proved  
to be defective by reason only of faulty workmanship or  
materials, we will, at our option repair or replace the  
same FREE OF ANY CHARGE for labour, materials or  
carriage on condition that:  
Products of Zanussi Electrolux manufacture which  
are NOT marketed by Zanussi Electrolux.  
European guarantee  
If you should move to another country within Europe  
then your guarantee moves with you to your new home  
subject to the following qualifications:  
The appliance has been correctly installed and used  
only on the electricity supply stated on the rating  
plate.  
The guarantee starts from the date you first  
purchased your product.  
The appliance has been used for normal domestic  
purposes only, and in accordance with the  
manufacturer’s instructions.  
The guarantee is for the same period and to the same  
extent for labour and parts as exists in the new  
country of use for this brand or range of products.  
The appliance has not been serviced, maintained,  
repaired, taken apart or tampered with, by any  
person not authorised by us.  
The guarantee relates to you and cannot be  
transferred to another user.  
All service work under this guarantee must be  
Your new home is within the European Community  
(EC) or European Free Trade Area.  
undertaken by a Service Force Centre.  
Any appliance or defective part replaced shall  
The product is installed and used in accordance with  
our instructions and is only used domestically, i.e. a  
normal household.  
become the Company’s property.  
This guarantee is in addition to your statutory and  
other legal rights.  
The product is installed taking into account  
regulations in your new country.  
Home visits are made between 8.30am and 5.30pm  
Monday to Friday. Visits may be available outside these  
hours in which case a premium will be charged.  
Before you move please contact your nearest Customer  
Care Centre, listed below, to give them details of your  
new home. They will then ensure that the local Service  
Organisation is aware of your move and able to look  
after you and your appliances.  
Exclusions  
This guarantee does not cover:  
France  
Germany  
Italy  
Senlis  
+33 (0) 344 62 29 29  
+49 (0) 800 234 7378  
+39 0434 39 4700  
Damage or calls resulting from transportation,  
Nurnberg  
Pordenone  
Stockholm  
Slough  
improper use or neglect, the replacement of any light  
bulbs or removable parts of glass or plastic.  
Sweden  
UK  
+46 (0) 8 672 53 90  
+44 (0) 1753 219897  
+353 (0)1 4090751  
Costs incurred for calls to put right an appliance  
which is improperly installed or calls to appliances  
outside the United Kingdom.  
Ireland  
Dublin  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
Care must be taken to ensure that the appliance  
does not stand on the electrical supply cable.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Any plumbing work required to install this  
appliance should be carried out by a qualified  
plumber or competent person.  
Should the appliance power supply cable need to  
be replaced, this should be carried out by our  
Service Force Centre.  
Technical Specifications  
DIMENSIONS  
Height  
Width  
Depth  
85 cm  
60 cm  
57 cm  
POWER SUPPLY VOLTAGE  
TOTAL POWER ABSORBED  
230-240 V/50 Hz  
2050 W (10A)  
Minimum  
Maximum  
50 kPa  
800 kPa  
WATER PRESSURE  
Washing  
MAX LOAD CAPACITY  
Cotton, linen  
Synthetics  
Delicate fabrics  
Wool and Hand Wash  
Drying  
5 kg  
2.5 kg  
2.5 kg  
2 kg  
Cotton, linen  
Synthetics  
2.5 kg  
2 kg  
SPIN SPEED  
Maximum  
1200 rpm  
CONSUMPTION DATA FOR WASHING Energy  
0.95 kWh  
49 litres  
5 KG NORMALLY SOILED COTTON  
ITEMS AT 60°C  
Water  
This appliance complies with the following E.E.C. Directives:  
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;  
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fill all the holes with the plastic plugs supplied with the  
instruction booklet.  
Unpacking  
All transit bolts and packing must be removed  
before using the appliance.  
You are advised to keep all the packaging for re-use in  
case the machine is to be transported again.  
Using a spanner unscrew and remove the two rear  
bottom screws. Slide out the two plastic pins.  
P1128  
P0002  
Lay the machine gently on its back, making sure that the  
hoses are not squashed.  
Important !  
You are advised to keep all the packaging for re-use in  
case the machine is to be transported again.  
In case of moving out the same precautions as per  
paragraphe “The dangers of freezing” must be taken  
i.e. the residual water in the hoses must be pumped out.  
P0001  
Positioning  
P1129  
Install the machine on a flat hard floor.  
Remove the polystyrene block from the bottom of the  
machine and release the two plastic bags.  
Very carefully slide out the left polythene bag, removing  
it towards the right and then downwards.  
Make sure that air circulation around the machine is not  
impeded by carpets, rugs etc. Check that the machine  
does not touch the wall or other kitchen units.  
Never place cardboard, wood or similar materials under  
the machine to compensate for any unevenness in the  
floor.  
1
Your new washing machine has been designed to be  
permanently plumbed in to your home’s water supply  
and drainage system. However, if this is not possible, it  
may be connected to a suitable existing tap with the  
drain hose discharging into a sink.  
2
3
P1124  
P1126  
The appliance has an inlet hose, with female 3/4” BSP  
thread connector. If this connection is not compatible  
with the plumbing of the existing installation, a variety  
of connectors are available from good hardware stores  
and plumbers merchants to suit most domestic  
plumbing. Any alteration to your existing plumbing  
must be carried out by a competent person, or qualified  
plumber.  
Repeat the operation for the right polythene bag,  
removing it towards the left and then upwards.  
Installation on a Suspended Floor  
P1127  
Suspended wooden floors are particularly susceptible to  
vibration. To help prevent vibration we recommend you  
place a waterproof wood panel, at least 15 mm thick  
under the appliance, secured to at least 2 floor beams  
with screws. If possible install the appliance in one of  
the corners of the room, where the floor is more stable.  
Remove the polystyrene base.  
Set the machine upright and unscrew the remaining rear  
screw. Slide out the relevant pin.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water inlet  
Connect the hose supplied with the machine to a tap  
with a 3/4” thread.  
Do not use already employed hoses.  
P1074  
The standpipe should have an internal diameter of  
approximately 38mm (see diagram) thus ensuring there  
is an air break between the drain hose and standpipe.  
P1088  
1
Installation should comply with local water authority  
and building regulations’ requirements.  
38 mm.(1/2") diameter  
standpipe  
The appliance must be connected to a cold water  
supply.  
A minimum water pressure of 50 kPa (0.5 bar) is  
required for safe operation of the appliance.  
P1040  
If you cannot make the cold water connection direct  
from the rising mains, you may be able to operate the  
appliance from your cold water storage system.  
When discharging into a standpipe ensure that the top of  
the curve in the hose end is no more than 90cm (35.4'')  
and no less than 60cm (23.6'') above floor level. The  
upright standpipe should have a minimum length of  
30cm (12'') from the bottom of the elbow to the top of  
the pipe (see diagram).  
There should be a minimum distance of 5.02m  
(161/2 ft) between the appliance’s inlet and the bottom  
of the water storage tank.  
Set the hose correctly by loosening the ring nut. After  
positioning the inlet hose, be sure to tighten the ring nut  
again to prevent leaks.  
3 pin  
P1130  
P0021  
Make sure that it is designed in such a way, that the end  
of the drain hose cannot be covered with water. The  
drain hose may be extended to a maximum of 4 metres.  
An additional drain hose and joining piece  
is available from your local Service Force Centre.  
The joining piece must have an internal diameter of  
18mm.  
Water drainage  
This appliance is designed to be permanently plumbed  
into your home's water supply and drainage system.  
The appliance drain hose should hook into a standpipe,  
the hook in the drain hose is formed using the plastic  
“U-Piece” supplied.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you intend the drain hose to empty into a sink, make  
sure that the sink is empty and the plug hole is not  
blocked. Use the plastic “U-Piece” supplied.  
Warning  
The machine should NOT be placed on deep pile  
carpeting.  
Note  
Please ensure that when the appliance is installed it is  
easily accessible for the engineer in the event of a  
breakdown.  
In the interest of the  
environment  
Washing machines and dishwashers should be  
connected to the FOUL drainage system, the water will  
then be taken to a sewage works for treatment before  
being discharged safely into a river.  
It is essential that these appliances are not connected to  
the surface water drainage system as this water is  
discharged directly into a river or stream and may cause  
pollution.  
If you require any further advice please contact your  
local water authority.  
P0022  
Important  
Before connecting up the machine to new pipework or  
to pipework that has not been used for some time, run  
off a reasonable amount of water to flush out any debris  
that may have collected in the pipes.  
Levelling  
Level the washing machine by raising or lowering the  
feet. The feet may be tight to adjust as they incorporate  
a self locking nut, but the machine MUST be level and  
stable (check diagonally).  
SHOWER  
P1051  
SINKTOILET  
BATH  
BIDET  
Any necessary adjustment can be made with a spanner.  
Accurate levelling prevents vibration, noise and  
displacement of the machine during operation.  
WASHING  
MACHINE  
DISHWASHER  
Some vibration is inevitable, especially if mounted on a  
wooden floor.  
RAINWATER  
'RUN-OFF'  
Sprung wooden floors are particularly susceptible to  
vibration. For advice, consult a builder. If possible,  
always place the machine on a solid floor.  
FOUL DRAIN  
SURFACE WATER  
FOUL SEWERS  
DRAINS & SEWERS  
SEWAGE  
TREATMENT  
WORKS  
UNTREATED  
DISCHARGE  
TREATED  
DISCHARGE  
Special conditions  
RIVER  
RIVER  
If the floor is carpeted or covered with crumbly or soft  
material, insert a rigid support base under the feet to  
prevent noise, vibration or displacement. The base  
should protrude a few centimetres beyond the edges of  
the machine.  
P0987  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The wire coloured brown must be connected to the  
terminal marked «L» or coloured red.  
Upon completion there must be no cut, or stray strands  
of wire present and the cord clamp must be secure over  
the outer sheath.  
Electrical connection  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
WARNING: THIS APPLIANCE MUST BE  
EARTHED.  
WARNING:  
A cut off plug inserted into a 13 amp socket is  
a serious safety (shock) hazard.  
Ensure that the cut off plug is disposed of  
safely.  
The manufacturer declines any liability should  
this safety measure not be observed.  
Before switching on, make sure the electricity supply  
voltage is the same as that indicated on the appliance’s  
rating plate. The rating plate is located at the top of the  
rim of the open door.  
Should the appliance power supply cable need to be  
replaced, this should be carried out by our Service  
Force Centre.  
Note  
When the appliance is installed the power supply cable  
must be accessible.  
P
r
M
o
d
o
d
.
N
.
.
.
o
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
S
.
.
e
.
.
r
.
.
N
o
.
.
.
.
.
.
.
.
.
.
Permanent connection  
Mod. ..........  
Prod. No. ...........  
In the case of permanent connection it is necessary that  
you install a double pole switch between the appliance  
and the electricity supply (mains), with a minimum gap  
of 3mm between the switch contacts and of a type  
suitable for the required load in compliance with the  
current electrical regulations.  
Ser. No. .........  
P0042 BD  
The appliance is supplied with a 13amp plug fitted.  
In the event of having to change the fuse in the plug  
supplied, a 13amp ASTA approved (BS1363/A) fuse  
must be used.  
The switch must not break the yellow and green earth  
cable at any point.  
Should the plug need to be replaced for any reason,  
proceed as described below.  
The wires in the mains lead are coloured in accordance  
with the following code:  
Green and Yellow  
Blue  
- Earth  
- Neutral  
- Live  
Brown  
GREEN & YELLOW  
E
L
N
BROWN  
BLUE  
CORD CLAMP  
P1041  
The wire coloured green and yellow must be connected  
to the terminal marked with the letter «E» or by the  
earth symbol  
or coloured green and yellow.  
The wire coloured blue must be connected to the  
terminal marked «N» or coloured black.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
From the Electrolux Group. The world’s No. 1 choice.  
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.  
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners,  
chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries  
around the world.  
© Electrolux plc 2003  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Weider Home Gym 831157150 User Manual
Whirlpool Air Conditioner CA10WXP0 User Manual
Whirlpool Garbage Disposal GC1000PE1 User Manual
White Outdoor Tiller 217 310 190 User Manual
White Rodgers Air Conditioner 57T01 843 User Manual
White Rodgers Thermostat 1F95 80 User Manual
Wolf Convection Oven WKGHD2 User Manual
Wybron Power Supply DPS850 User Manual
Xantrex Technology Battery Charger TC20+ User Manual
Zanussi Range ZEL 63 User Manual