WASHING MACHINE
FJD 1266 W
FJD 1466 W
FJD 1466 S
FJD 1666 W
DELAY
START
F
J
D
1
2
6
6
W
COTTONS
SYNTHETICS
DELICATES
90°C
60°C
50°C
40°C
30°C
1200
900
700
500
PREWASH
EXTRA
IRON DRY
RINSE
WOOL
/
FF
SKIP
HAND
RINSE
QUICK
STORE DRY
HOLD
WASH
WASH
T
S
T
R
E
SET
E
AR
T
/PAU
S
E
S
D
Y
D
R
E
E
P
O
P
E
U
R
N
P
E
T
I
O
N
S
R
I
C
S
R
AT
S
GB
INSTRUCTION BOOKLET
132994630
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Something Not Working
Service and Spare Parts
Zanussi Guarantee Conditions
19-20
20
For the User
Important Safety Information
2
4
21
Your New Washing Machine
Description of the Appliance
Door locked light
Detergent dispenser drawer
Child safety feature
5
5
5
5
For the Installer
Installation Instructions
Technical Specifications
22
22
The Control Panel
6-9
6
Unpacking
Positioning
Water inlet
Water drainage
Levelling
Special conditions
In the interest of the environment
Electrical connection
23
23
24
Turning the acoustic signal off
Operating sequence
Load the laundry
Measure out the detergent
Measure out the fabric softener
Switch the machine on
10-12
10
24-25
25
10
10
10
10
25
25
26
Select the required programme/fabric
Select the temperature
11
Select the spin speed or the NIGHT WASH option 11
Select the desired options
Select the SUPER RINSE or AA40° option
Select the DELAY START
11
11
11
11
12
12
Start the programme
How to change a programme during its cycle
How to cancel a programme during its cycle
How to open the door during the cycle of
a programme
12
12
End of programme
Washing Hints
Which detergent?....
And in which form?
13-14
14
14
Wash Care Symbols
Washing Programmes
15
16
Maintenance and Cleaning
17-18
17
Descaling
After each wash
17
Maintenance Wash
17
External cleaning
17
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the filter
17
17
17-18
18
The dangers of freezing
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Your New Washing Machine
Your new washing machine, fitted with the Zanussi “JET SYSTEM”, meets all modern
requirements for effective treatment of laundry with low water, energy and detergent
consumption.
Even small loads are washed “economically” because the amount of water used is regulated
automatically according to the load and type of fabric.
●
Automatic cooling of the wash water to 60°C
In the interest of the
before draining, with the 90°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.
environment
●
Materials marked with the symbol
recyclable.
are
●
●
The special wool programme with its new delicate
wash system treats your woollens with extreme care.
●
●
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
The anti-unbalance device ensures that the washing
machine remains stable when spinning.
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
Ecological hints
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
●
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
●
Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).
How do we help to protect the environment?
We use recycled paper!
●
The machine works more economically if it is fully
loaded.
●
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
●
Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed “Something
Not Working”.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the Appliance
2
1
1 Detergent dispenser drawer
2 Control panel
D
S
E
TA
L
A
R
Y
T
FJD 1266
W
90°C
60°C
50°C
40°C
30°C
1200
900
700
500
COTTONS
SYNTHETICS
DELICATES
WOOL
OUTDOOR
SPORTS
PREWASH
AA40°
N
/
O
F
O
3 Door locked light
4 Door opening handle
5 Filter
SKIP
HAND
NIGHT
WASH
WASH
T
S
T
E
A
U
S
R
ES
E
T
A
R
E
I
T
/
P
R
S
N
S
D
O
O
E
H
H
C
R
I
C
E
A
T
U
S
E
P
B
R
6 Adjustable feet
3
4
5
Door locked light
It stays on during the whole programme indicating that
the door is locked.
6
When the light goes out, the door can be opened (see
page 12).
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
C0063
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.
P1131
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The Control Panel
DELAY
START
FJD 1266 W
1200
900
700
500
90°C
60°C
50°C
40°C
30°C
COTTONS
SYNTHETICS
ASH
PREW
OUTDOOR
SPORTS
PREWASH
AA40°
DELICATES
WOOL
N
F
F
O
NIGHT
HAND
ICK
QU
WASH
WASH
T
T
S
E
S
W
E
S
E
R
E
T
A
C
I
O
E
R
U
A
T/
P
R
D
S
S
O
E
N
S
U
E
H
C
P
H
I
T
A
P
S
C
E
R
R
B
1
2
3
4
5
6
7
8
9
10 11 12
1 ON/OFF button
Press this button to switch the washing machine on.
The display (8) will show three blinking dashes or a
blinking zero. You will find more detailed explanations
on pages 7-8 (see “DISPLAY”).
Press the ON/OFF button again to switch the machine
off.
IMPORTANT!
By pressing the TEMPERATURE and SPIN
SPEED buttons simultaneously, the acoustic signal
is deactivated at the end of the cycle, when selecting
the programmes and in case of an incorrect option
selection .
By pressing these 2 buttons again the acoustic signal
is reactivated.
2 MAINS-ON light
This light is connected to the ON/OFF button. It lights
up when you press the button, and goes out when you
press it again.
5 SPIN SPEED button
Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washing machine. The
relevant light will light up.
3 FABRIC button
Press this button repeatedly to select the programme on
the basis of the type of laundry to be washed. The light
relevant to the selected programme will light up. The
washing machine will propose a temperature and
automatically select the maximum spin value provided
for the programme you have chosen. You can change
these values by operating buttons 4 and 5.
Maximum speeds are:
• for cotton: 1,600, 1,400 or 1,200 rpm depending on
the model;
• for synthetic fabrics, wool and fabrics to be hand-
washed: 900 rpm;
• for delicate fabrics: 700 rpm.
NIGHT WASH position : when you choose this
option, the machine will not drain the water of the last
rinse, so as not to wrinkle the laundry.
Hand wash
When you select this programme, you obtain a
particularly delicate washing, suitable for articles of
clothing whose label indicates that they must be hand-
As all spinning phases are suppressed, this washing
cycle is very quiet and it can be useful at night or in
times with a more economical power rate.
washed
.
On cotton and synthetic programmes the rinses will be
performed with more water.
4 TEMPERATURE button
At the end of the cycle, the light corresponding to the
option NIGHT WASH is on and the START/PAUSE
button light will flash, to indicate that the water must be
drained. A static zero will appear on the display.
To complete the cycle, choose one of the following
options:
Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
washing machine. The relevant light will light up.
Maximum temperatures are 90°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed (HAND WASH programme).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
• Draining and spin:
7 OPTIONS button
- Press the START/PAUSE button. The machine will
drain the water, then spin the laundry at the
maximum speed provided for the selected
programme.
- Select spin speed by means of button 5, and press
the START/PAUSE button.
Press this button to select the following options:
• SUPER RINSE: this option can be selected with all
programmes except the wool programme and hand
wash. The machine performs 4 rinses instead of 3.
This option is recommended for people who are
allergic to detergents, and in areas where the water is
very soft.
• Drain only
- Press the SKIP/RESET button once, so as to cause
the DRAIN light to light up, then press the
START/PAUSE button.
If the water is not emptied out, the machine
automatically empties itself after 18 hours.
• AA 40°: this option can be selected for cottons and
synthetics lightly or normally soiled with a
temperature of 40°C or higher.
If you select 40°C together with option AA 40°, the
machine will prolong the time at 40°C in the washing
phase. On cotton programme this will allow an A class
in energy efficiency and washing performance to be
achieved.
Important! If you accidentally press the SKIP/RESET
button more than once, the display will show three
blinking dashes. To cause the washing machine to
drain the water, select any washing programme by
means of the FABRIC button, then press SKIP/RESET
three times in order to select the DRAIN position (only
the DRAIN light will remain lit).
If you select 90°C and press the AA 40° button, the
washing temperature will be reduced from 90°C to
60°C.
If you select 60°C or 50°C and press the AA 40°
button, the washing temperature will be reduced to
40°C. In both cases the washing time will be
prolonged.
6 WASH CHOICE button
Press this button to select the following options:
• PREWASH: select this option if you wish your
laundry to be prewashed before the main wash (not
available for wool and hand-wash cycle).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
The SUPER RINSE and the AA 40°options can be
selected together by means of the relevant button.
8 Display
The following pieces of information are shown on the
display:
• Three blinking dashes, when a programme is
cancelled by means of the SKIP/RESET button.
• OUTDOOR SPORTS: select this option if you wish
to perform a soak of about 30 minutes at 30°C to your
laundry. By pressing the DELAY START button the
soak time can be prolonged up to 24 hours max. After
this time the wash cycle will automatically start.
The three blinking dashes will also appear when you
press the ON/OFF button to switch the machine on, if
the previously selected cycle has been erased.
This fonction is not available for wool and hand-wash
cycle.
The soak ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
---
• QUICK: select this option for laundry that is only
slightly soiled (not for WOOL and HAND WASH
programme).
•
The washing time will be reduced according to the
Duration of washing programme in hours and
type of fabric and the selected temperature.
minutes, after you have selected a programme.
The PREWASH, the OUTDOOR SPORTS and the
QUICK options cannot be selected together.
While the programme is running (after you have
pressed the START/PAUSE button), the displayed time
value decreases by one unit every minute.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
• The washing machine has stopped with water in the
tub, at the end of a programme with the NIGHT
WASH option: this is indicated by a static zero.
• The washing machine has completed the
programme: this is indicated by a blinking zero. At
the same time, the door locked light goes out. The
zero will reappear when you switch the washing
machine on, unless the previous programme has been
erased by means of the SKIP RESET button.
E20
9 START/PAUSE button
Important!
This button has three functions:
The first time you use the washing machine, when
you switch it on, it may display a blinking zero and give
an audible warning signal. This is due to the fact that the
washing machine has performed a washing cycle during
the manufacturer’s inspection tests, and this cycle has
not been erased after its completion.
• Start: after you have selected the desired programme
and options, press this button to start the washing
machine. The light above the button will stop flashing
and remain lit.
If you have selected a delay time by means of button
11, the countdown will begin and will be shown on the
display.
• Delay start, a time value indicated in hours and
selected by means of the relevant button.
• Pause: when you press this button again, the
programme in progress is interrupted. The light above
the button will start flashing. To restart the programme,
press the button again.
When you PAUSE the cycle, the DOOR LOCKED
light goes out, and it becomes possible to open the
door, provided
• the washing machine is not in the heating phase;
• the level of the water is not high;
• the drum is not turning.
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the START/PAUSE button, the
countdown begins, and the delay time value decreases
by one unit every hour.
Important! You must set the washing machine to
PAUSE before you make any change in the programme
in progress.
You can delay the start of the selected programme by
up to 24 hours in one hour intervals.
• Draining of water and spinning after the completion
of programmes with the NIGHT WASH option.
• An incorrect option selection has been made: this is
indicated by the message Err when a function
incompatible with the current programme is selected.
10 SKIP/RESET button
This button performs two functions:
- Clears the memory
- Selects special programmes
At the end of every programme the RESET button must
be pressed once or repeatedly to clear the programme
memory. This will be confirmed by three dashes,
flashing in the display.
If the previous programme is not cleared, the display
will show a “0” flashing and an audible signal will
sound, when you switch the machine on.
The incorrect selection is also indicated by an audible
warning signal.
Selecting a special programme:
A wash programme must be selected in the normal way.
(START button not pressed)
• An alarm code indicates a fault in the machine
operation (see the relevant chapter on page 19).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PREWASH
WASH
RINSES
SPIN
S
E
S
T
A
U
R
A
/
P
T
DRAIN
The SKIP button is then used to cancel or advance the
programme to the required phase.
The SKIP button can only operate when the programme
is in pause.
A normal wash cycle consists of the following phases,
Wash - Rinses - Spin and is confirmed by the
illumination of the corresponding LED,s.
11 DELAY button
This button makes it possible to delay the starting of the
programme by up to 24 hours. The delay you have
selected is shown on the display for about 3 seconds;
afterwards, the duration of the programme reappears.
If the button OUTDOOR SPORTS has been pressed the
selected delay will correspond to the soak time. If no
delay time is selected the soak programme will last
about 30 minutes.
PREWASH
WASH
You must select this option after you have set the
programme and before you press the START/PAUSE
button.
The time value shown on the display will decrease by
one unit every hour.
RINSES
SPIN
DRAIN
You can change the delay time at any moment, before
you press the START/PAUSE button.
If you have already pressed the START/PAUSE button,
and you wish to change or cancel the delay time,
proceed as follows:
To select rinses & spin, the programme must be
paused, now press the SKIP button once, the wash LED
goes out.
• set the washing machine to PAUSE by pressing the
START/PAUSE button;
PREWASH
WASH
• press the DELAY button until the display shows the
desired delay time or
RINSES
SPIN
• press the DELAY button once, to erase the delay time.
The display will indicate “0h”.
DRAIN
• press the START/PAUSE button again.
Important!
To select spin only, the programme must be paused,
now press the SKIP button twice.
The wash & rinsess LED,s go out.
The door will be locked throughout the delay time
(DOOR LOCKED light lit).
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the door,
press the START/PAUSE button again.
PREWASH
WASH
RINSES
SPIN
12 Programme phase indicator
lights
DRAIN
When you select a programme, the lights relevant to the
phases that form the programme light up.
To select Drain the programme must be paused, now
press the SKIP button three times, the wash - rinses -
spin LED,s go out.
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Sequence
Before the first wash, we recommend that you run a
4. Switch the machine on
Press the ON/OFF button to switch the machine on. The
display will show three blinking dashes or a blinking
zero. The light above the button will light up.
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
/
F
0
1.Load the laundry
Open the door.
---
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
5. Select the desired programme/
fabric
Press the FABRIC button repeatedly, in order to select
the desired programme/fabric. The relevant light will
light up.
P0004
The lights relevant to the phases that form the
programme will light up.
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The START/PAUSE button
light will start flashing.
main wash compartment
.
If you wish to carry out the prewash or a soak
programme (OUTDOOR SPORTS), pour detergent into
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the cycle.
the appropriate compartment marked
.
3.Measure out the fabric
softener
COTTONS
SYNTHETICS
PREWASH
DELICATES
WOOL
WASH
RINSES
SPIN
If required, pour fabric softener into the compartment
HAND
marked , without exceeding the «MAX» mark.
WASH
DRAIN
F
A
C
I
R
C0064
C0065
Close the drawer gently.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select the temperature
Press the TEMPERATURE button if you wish to select
a temperature value different from the one proposed by
the washing machine.
9. Select the SUPER RINSE or
AA40 option
If you wish the laundry to undergo an extra rinse, select
the SUPER RINSE option.
°
The relevant light will light up.
If your laundry is lightly or normally soiled and it is
necessary to prolong the washing time, select the
AA40° option.
90°C
60°C
50°C
40°C
30°C
The relevant light illuminates.
ER
SUP
T
E
U R
T
RIN
SE
E
A
R
AA40°
S
P
N
T
I
O
7. Select the spin speed or the
NIGHT WASH option
Press the SPIN SPEED button repeatedly, in order to
select the desired spin speed or the NIGHT WASH
option. The relevant light will light up.
If you select the NIGHT WASH option, the machine
will stop at the end of the programme with the water still
in the tub.
10. Select the DELAY START
Before you start the programme, if you wish the
starting to be delayed, press the DELAY START button
repeatedly, or keep it pressed, to select the desired delay.
The selected delay time value (up to 24 hours) will
appear on the display for 3 seconds, then the duration of
the programme will appear again.
1400
1200
900
If the OUTDOOR SPORTS option has been choosen,
the selected delay will correspond to the soak time. In
this case the display will show after 3 seconds the entire
programme duration (including the soak phase).
700
NIGHT
WASH
S
D
P
E
I
E
P
S
DELAY
START
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the PREWASH option.
If you wish the laundry to undergo a soak, select the
OUTDOOR SPORTS option.
If your laundry is only slightly soiled, select the QUICK
option.
11. Start the programme
PREWASH
Press the START/PAUSE button. The relevant light will
stop flashing, the DOOR LOCKED light will light up,
and only the light relevant to the phase that is in
progress will remain lit.
OUTDOOR
SPORTS
QUICK
If you have chosen a delayed start, the washing machine
will begin the countdown.
C
I
O
H
H
C
The display will show the duration of the programme or
the selected delay.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
After approximately 3 minutes, you can open the door.
12. How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
Pay attention to the level and temperature of the
water in the washing machine!
When you close the door and press the ON/OFF button
again, the washing machine will resume the programme
from the point where it had been interrupted.
It is possible to change any phase before the programme
carries it out.
15. End of programme
At the end of the programme, the washing machine
stops automatically, gives an audible signal, and
displays a blinking zero.
If you had selected the NIGHT WASH option, the
START/PAUSE button light flashes to indicate that the
water must be drained. The display shows a steadily lit
zero.
Changing the type of fabric or temperature is possible,
obviously, only during the washing phase. When you
make a change in these two parameters, the washing
machine will resume the cycle from the beginning.
If it is necessary to drain the water in order to change the
programme in progress, proceed as follows:
• PAUSE the machine by pressing the START/PAUSE
button;
When the programme has been completed, a blinking
zero appears on the display and the audible signal is
given.
• press the SKIP/RESET button repeatedly, until only
the DRAIN light remains lit;
• press the START/PAUSE button again.
The DOOR LOCKED light goes out at once.
When the water has been drained, the display shows a
blinking zero. You may now select a new programme
and press the START/PAUSE button to start it.
Press the SKIP/RESET button repeatedly to erase
the programme that has just been carried out. If you
omit to do this, the next time you switch the washing
machine on, the blinking zero will appear on the
display and you will hear the audible signal.
13. How to cancel a programme
during its cycle
To cancel a programme that is being carried out, first
pause the washing machine by pressing the
START/PAUSE button, then press the SKIP/RESET
button repeatedly, until the display shows three blinking
dashes.
Note: when you switch the machine on, if you must
erase the previously performed programme, it is also
sufficient to press the FABRIC button and select a new
programme.
Press the ON/OFF button to switch the machine off.
The relevant light will go out.
Remove the laundry from the washing machine.
14. How to open the door during
the cycle of a programme
You can open the door, after having set the washing
machine to PAUSE, provided the following conditions
exist:
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get damaged
in a subsequent wash (e.g. by shrinking) or bleed colour
into another load of laundry.
• the washing machine is not in the heating phase
beyond 55°C;
We advise you to close the water supply tap and
disconnect the plug from the socket.
• the level of the water is not high;
• the drum is not turning.
Leave the door ajar in order to air the washing machine.
If these requirements are met, when you pause the
washing machine, the DOOR LOCKED light goes out
and the door can be opened.
Should it not be possible to open the door, and should it
be absolutely necessary to do so, switch the machine off
by pressing the ON/OFF button.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Hints
●
●
Do NOT overload the machine. Weigh the laundry the
Use the correct quantities of detergent.
first few times you use the appliance.
For wool, use gentle detergent only in small
quantities.
The average weights of the most common items are
listed below as a guide:
●
●
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
1000g = 1 kg
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special pre-
soak product or biological detergent.
Sheet
700-1000 g
100-200 g
400-500 g
50-100 g
Pillow case
Tablecloth
Serviette
●
●
Only wool marked “Pure New Wool - washable,
preshrunk” can be washed in the machine using the
wool programme; other types of wool should be
washed by hand or dry cleaned.
Tea towel
70-120 g
Linen hand towel
Towelling hand towel
Towelling bath towel
Bath robe
100-150 g
150-250 g
700-1000 g
1000-1500 g
200-300 g
150-200 g
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
Man’s shirt
Apron
●
Once you have finished using the machine, you are
advised to unplug it and turn off the water tap.
●
Load the laundry loosely alternating large items with
small ones.
«JETSYSTEM» wash
●
●
●
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
As the Jetsystem is flexible and adjusts water intake
according to wash load size it is not possible to give you
exact recommandations as to the amount of detergent
that should be used for any one wash.
Avoid washing unhemmed or torn items as they may
unravel.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
Therefore we recommend that you use approximately
1/3 less than the detergent manufacturer recommends on
the packet or bottle, making the appropriate allowances
for soft or hard water, and light or heavy soilage of
clothes. If you have judged the amount correctly you
should expect to see a soft sudsy liquid during the wash.
It is not necessary to have a head of lather on the water.
●
●
●
When washing curtains, remove the hooks.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
●
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
●
●
●
White items should not be washed with coloured
items.
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Use a good quality detergent suitable for automatic
washing machines.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
And in which form?
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is
your own personal choice.
Which detergent?....
To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents recommended
for use in automatic machines.
To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol
the machine immediately upon placing the
detergent in the dispenser drawer.
WHITES
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
, start
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
NON BIOLOGICAL
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the detergent
into the specially designed dosing device* which
should be placed on top of the laundry, and at the back
of the machine drum.
COLOUREDS
For coloured items you should use a
detergent which is designed to clean
while maintaining the original colour.
Ariel Color does not contain bleach
and therefore helps to preserve
colours.
* If you use a dosing device in a washer dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
DELICATE ITEMS
FABRIC CONDITIONERS
These are ideal for improving ‘softness’, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
When washing delicates such as
woollens, you should use a product
which is specially designed to care for
fine fabrics.
Dreft Automatic is suitable for
woollens and other delicates.
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
LAUNDRY BLEACH
For additional stain removal you may
wish to use a product such as Ace
Gentle Bleach which is used in addition
to your chosen detergent. Ace is
suitable for all washable fabrics
including silks, woollens and coloureds.
marked with the symbol
.
Follow the manufacturer’s dosage
instructions and never exceed the
MAX level.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
Normal (Maximum)
Normal (Maximum)
FABRIC
White Cotton or Linen
without Special Finishes
95
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
60
50
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.
Reduced (Medium)
Normal (Maximum)
Reduced (Medium)
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
40
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
Wool, wool mixtures, Silks
Do not machine wash
40
Much Reduced (Minimum)
Hand wash only
BLEACHING
Chlorine bleach may be used
IRONING
Cotton, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Hot iron
Warm iron
Cool iron
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
TUMBLE DRYING
with high heat setting
with low heat setting
May be tumble dried
A cross through any symbol means «DO NOT»
X
Important Notes
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
Once the dispenser has been filled, close it by pushing it
in gently. This is particularly important if you are using
fabric conditioner to avoid the conditioner entering the
machine prematurely.
When using liquid detergent and a prewash programme,
place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Type of
Consumption*
laundry and
symbols on
labels
Programme/ Description of
Load
Available options
Energy
kWh
Water
litres
Time
h/min.
temperature
programme
60
95
SPIN SPEED
NIGHT WASH
PREWASH
6 kg
Cottons
60°-90°C
Main wash at
60°-90°C
3 rinses
2.39
2.0
55
White cotton:
e.g. sheets,
tablecloths,
household
linen
OUTDOOR SPORTS
QUICK
Long spin
SUPER RINSE
AA40°
60
40
30
Main wash at
60°-50°-40°-
30°C
3 rinses
Long spin
2.16
6 kg
3 kg
3 kg
SPIN SPEED
NIGHT WASH
PREWASH
1.14
52
Cottons
60°-50°-40°-
30°C
Coloured
cotton: e.g.
shirts, blouses,
underwear,
towels, house-
hold linen
OUTDOOR SPORTS
QUICK
SUPER RINSE
AA40°
50
60
40
30
1.0
55
60
Main wash at
60°-50°-40°-
30°C
3 rinses
Short spin
Synthetics
60°-50°-40°-
30°C
1.36
1.07
SPIN SPEED
NIGHT WASH
PREWASH
Synthetic
fabrics and
blends: e.g.
shirts, blouses,
underwear
OUTDOOR SPORTS
QUICK
SUPER RINSE
AA40°
40
30
Main wash at
40°-30°C
3 rinses
SPIN SPEED***
NIGHT WASH
PREWASH
OUTDOOR SPORTS
QUICK
Delicates
40°-30°C
0.55
Delicate fab-
rics: e.g.
acrylic fabrics,
viscose, poly-
ester, synthetic
blends
Short spin
SUPER RINSE
40
30
2 kg
2 kg
SPIN SPEED
NIGHT WASH
63
63
Main wash at
40°-30°C
3 rinses
Wool
40°-30°C
0.40
0.40
55
58
Wool
Short spin
Main wash at
40°-30°C
3 rinses
SPIN SPEED
NIGHT WASH
Hand wash
40°-30°C
Short spin
The “coloured cotton programme” at 60°C is the reference programme for the data entered in the energy label, in
compliance with EEC 92/75 standards.
* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of
laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature
provided for each programme.
*** Only for the model FJD1266W
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the electricity
supply.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
C0067
C0066
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
C0068
P1086
preserve the door seal.
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
Maintenance Wash
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
To run a maintenance wash:
●
The drum should be empty of laundry.
●
Select the hottest cotton wash programme.
●
Use a normal measure of detergent, must be a
powder (such as Ariel Futur).
P0038
External cleaning
Clean the exterior cabinet of the appliance with soap and
water only, and then dry thoroughly.
Cleaning the filter
The water drain filter
A clean filter is important for the correct operating of the
machine, and should therefore be cleaned after every
washing programme.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.
Open the filter door by pulling it towards the right.
Place a container under the filter to catch any spillage.
To aid cleaning, the top part of the additive compartment
should be removed.
P0861
17
Download from Www.Somanuals.com. All Manuals Search And Download.
If the filter is blocked and the machine is unable to drain
you will need to drain the water manually from the
machine at this stage. To do this, unhook the drain hose
from the standpipe or sink and hold the end of the hose
over a bowl on the floor. The water should drain by
gravity into the bowl. When the bowl is full, hook the
hose back up and empty the bowl. Repeat the procedure
until water stops flowing out.
Clean the filter using a hard bristle brush.
Tighten up the inlet hose.
Unscrew and remove the filter.
P1090
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
●
Turn off the water tap.
P0860
P0859
●
Unscrew the inlet hose.
Clean carefully under a fast running tap.
●
Unhook the drain hose from the rear support and
position the end of this hose and that of the inlet
hoses in a bowl. Run the draining programme.
To do this:
●
Switch the machine on
●
Select a washing programme
●
Press the SKIP/RESET button three times
P0040
●
Press START/PAUSE button
●
Disconnect the appliance.
Put the cap back on the emergency emptying hose,
place the latter back in its seat. Close the filter door.
●
Screw the inlet hose and reposition the drain hose.
●
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
Warning
When the appliance is in use and depending on the
programme selected there can be hot water in the filter.
Never remove the filter during a wash cycle, always
wait until the appliance has finished the cycle, and is
empty. When replacing the filter, ensure it is securely
retightened so as to stop leaks and young children being
able to remove it.
The water inlet filter
If your water is very hard or contains traces of lime
deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
Turn off the water tap. Unscrew the water inlet hose.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed
below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
During machine operation it is possible that one of the following alarm codes appears on the display:
- E10 : problem with the water supply
- E20 : problem with water draining
- E40 : door open
Once the problem has been eliminated, press the START/PAUSE button
to restart the programme. If after all
checks, the problem persists, contact your local Service Force Centre.
Symptom
Possible causes
●
The machine does not start
The door has not been closed. (E40)
●
●
●
●
●
The plug is not properly inserted in the power socket.
There is no supply at the socket.
The main fuse or the fuse in the plug has blown.
The START/PAUSE button has not been depressed.
The DELAY START option has been selected.
●
●
●
●
The water tap is closed. (E10)
The machine does not fill
The filter in the inlet hose is blocked. (E10)
The inlet hose may be squashed or kinked. (E10)
The door has not been closed. (E40)
●
●
●
The machine fills then empties
immediately
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
●
●
●
●
The machine does not empty and/or
does not spin
The drain hose may be squashed or kinked. (E20)
The NIGHT WASH option has been selected.
The drain filter may be blocked. (E20)
The drain hose extension, if fitted, is not correct. Follow the
instructions for connecting to the waste.
The drainage system pipes are blocked.
The wash load is unbalanced: redistribute the clothes inside the drum to
allow the machine to spin.
●
●
●
●
There is water on the floor
Too much detergent or unsuitable detergent has been used (creates too
much foam).
Check whether there are any leaks from the inlet hose fittings. It is not
always easy to see this as the water runs down the hose; check to see if
it is damp.
●
●
●
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
●
Unsatisfactory washing results
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
●
●
●
Stubborn stains have not been treated prior to washing
The correct wash programme/temperature has not been selected.
Too much laundry has been placed in the drum.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible causes
●
The machine vibrates when spinning
The internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not level and stable (check diagonally).
The washing load is badly distributed in the drum.
●
●
●
●
Maybe there is very little laundry in the drum.
●
The door will not open
The water level is above the bottom edge of the door.
The machine is heating the water.
The drum is turning.
●
●
The door can only be opened when the relevant light has gone out.
●
The electronic unbalance detection device has cut in because the
Spinning starts late or the machine
does not spin
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 15 minutes, the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case, redistribute the load
manually and select the spin programme.
●
The machine makes an unusual
noise
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
●
No water is visible in the drum
Machines based on modern technology operate very economically
using very little water without affecting performance.
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Zanussi Service Force Centre by telephoning:
P
r
M
o
d
o
d
.
N
.
.
.
o
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
S
.
.
e
.
.
r
.
.
N
o
.
.
.
.
.
.
.
.
.
.
0870 5 929929
Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042 BD
For the address of your local Service Force Centre and
further information about Service Force, please visit the
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
Customer Care
For general enquiries concerning your Zanussi appliance
or for further information on Zanussi products, please
contact our Customer Care Department by letter or
telephone as follows:
Customer Care Department
Zanussi
55-77 High Street
Slough
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture).
Berkshire
5. The purchase date
SL1 1DZ
Tel 08705 727727*
* calls to this number may be recorded for training
purposes.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Zanussi Guarantee Conditions
Standard guarantee conditions
Exclusions
We, Zanussi undertake that if, within 12 months of the
date of the purchase, this Zanussi appliance or any part
thereof is proved to be defective by reason only of
faulty workmanship or materials, we will, at our option,
repair or replace the same FREE OF ANY CHARGE
for labour, materials or carriage on condition that:
This guarantee does not cover:
●
Damage or calls resulting from transportation,
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
●
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
●
The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
●
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
●
The appliance has been used for normal domestic
purposes only, and in accordance with the
manufacturer’s instructions.
●
Products of Zanussi manufacture which are NOT
marketed by Zanussi.
●
The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.
European guarantee
All service work under this guarantee must be
undertaken by a Zanussi Service Force Centre.
If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:
Any appliance or defective part replaced shall become
the Company’s property.
The guarantee starts from the date you first
●
This guarantee is in addition to your statutory and other
legal rights.
purchased your product.
The guarantee is for the same period and to the same
●
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
extent for labour and parts as exists in the new
country of use for this brand or range of products.
The guarantee relates to you and cannot be
●
transferred to another user.
Your new home is within the European Community
●
(EC) or European Free Trade Area.
The product is installed and used in accordance with
●
our instructions and is only used domestically, i.e. a
normal household.
The product is installed taking into account
●
regulations in your new country.
Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look
after you and your appliances.
France
Germany
Italy
Senlis
+33 (0)344 62 29 29
+49 (0)800 234 7378
+39 (0)434 39 4700
+46 (0)8 672 53 90
+44 (0)1753 219897
Nurnberg
Pordenone
Stockholm
Slough
Sweden
UK
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Technical Specifications
DIMENSIONS
Height
Width
Depth
85 cm
60 cm
57 cm
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
230-240 V/50 Hz
2050 W (10A)
WATER PRESSURE
Minimum
Maximum
50 kPa (0.5 bar)
800 kPa (8 bar)
MAXIMUM RECOMMENDED LOAD
Cotton, linen
Synthetics
Delicate fabrics
Wool/Hand wash
6 kg
3 kg
3 kg
2 kg
SPIN SPEED
Maximum
1200 rpm (FJD 1266W)
1400 rpm (FJD 1466W)
1400 rpm (FJD 1466 S)
1600 rpm (FJD 1666W)
CONSUMPTION DATA FOR WASHING
6 KG NORMALLY SOILED COTTON
ITEMS AT 60°C
Energy
Water
1.14 kWh
52 litres
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Fill all the holes with the plastic plugs supplied with the
instruction booklet.
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
Using a spanner unscrew and remove the two rear
bottom screws. Slide out the two plastic pins.
P1128
P0002
Lay the machine gently on its back, making sure that the
hoses are not squashed.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not
impeded by carpets, rugs etc. Check that the machine
does not touch the wall or other kitchen units.
Never place cardboard, wood or similar materials under
the machine to compensate for any unevenness in the
floor.
P0001
P1129
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to a suitable existing tap with the
drain hose discharging into a sink.
Remove the polystyrene block from the bottom of the
machine and release the two plastic bags.
Very carefully slide out the left polythene bag, removing
it towards the right and then downwards.
The appliance has an inlet hose, with female 3/4” BSP
thread connector. If this connection is not compatible
with the plumbing of the existing installation, a variety
of connectors are available from good hardware stores
and plumbers merchants to suit most domestic
plumbing. Any alteration to your existing plumbing
must be carried out by a competent person, or qualified
plumber.
1
2
3
P1124
P1126
Repeat the operation for the right polythene bag,
removing it towards the left and then upwards.
Installation on a Suspended Floor
Suspended wooden floors are particularly susceptible to
vibration. To help prevent vibration we recommend you
place a waterproof wood panel, at least 15 mm thick
under the appliance, secured to at least 2 floor beams
with screws. If possible install the appliance in one of
the corners of the room, where the floor is more stable.
P1127
Remove the polystyrene base.
Set the machine upright and unscrew the remaining rear
screw. Slide out the relevant pin.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Water inlet
Connect the hose to a tap with a 3/4” thread.
Do not use already employed hoses.
Water drainage
This appliance is designed to be permanently plumbed
into your home's water supply and drainage system.
The appliance drain hose should hook into a standpipe,
the hook in the drain hose is formed using the plastic
“U-Piece” supplied.
P1088
Installation should comply with local water authority
and building regulations’ requirements.
P1074
The appliance must be connected to a cold water
supply.
The standpipe should have an internal diameter of
approximately 38mm (see diagram) thus ensuring there
is an air break between the drain hose and standpipe.
A minimum water pressure of 50 kPa (0.5 bar) is
required for safe operation of the appliance.
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
1
38 mm.(1/2") diameter
standpipe
There should be a minimum distance of 5.02m
(16.5 ft) between the appliance’s inlet and the bottom of
the water storage tank.
Set the hose correctly by loosening the ring nut. After
positioning the inlet hose, be sure to tighten the ring nut
again to prevent leaks.
P1040
When discharging into a standpipe ensure that the top of
the curve in the hose end is no more than 90cm (35.4'')
and no less than 60cm (23.6'') above floor level. The
upright standpipe should have a minimum length of
30cm (12'') from the bottom of the elbow to the top of
the pipe (see diagram).
P0021
3 pin
P1039
Make sure that it is designed in such a way, that the end
of the drain hose cannot be covered with water. The
drain hose may be extended to a maximum of 4 metres.
An additional drain hose and joining piece
is available from your local Service Force Centre.
The joining piece must have an internal diameter of 18mm.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
If you intend the drain hose to empty into a sink, make
sure that the sink is empty and the plug hole is not
blocked. Use the plastic “U-Piece” supplied.
Special conditions
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
Warning
The machine should NOT be placed on deep pile
carpeting.
P0022
Note
Important
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
Before connecting up the machine to new pipework or
to pipework that has not been used for some time, run
off a reasonable amount of water to flush out any debris
that may have collected in the pipes.
In the interest of the
environment
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
Levelling
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level and
stable (check diagonally).
If you require any further advice please contact your
local water authority.
P1051
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
Some vibration is inevitable, especially if mounted on a
wooden floor.
SHOWER
SINK TOILET
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
BATH
BIDET
WASHING
MACHINE
DISHWASHER
RAINWATER
'RUN-OFF'
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
FOUL SEWERS
SEWAGE
TREATMENT
WORKS
UNTREATED
DISCHARGE
TREATED
DISCHARGE
RIVER
RIVER
P0987
25
Download from Www.Somanuals.com. All Manuals Search And Download.
The wire coloured blue must be connected to the
terminal marked «N» or coloured black.
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability should
this safety measure not be observed.
WARNING:
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
The power supply cable must be easily accessible
after installing the appliance.
P
r
M
Permanent connection
o
d
o
d
.
N
.
.
.
o
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
S
.
.
e
.
.
r
.
.
N
o
.
.
.
.
.
.
.
.
.
.
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042 BD
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1362/A) fuse
must be used.
The switch must not break the yellow and green earth
cable at any point.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
- Earth
- Neutral
- Live
Brown
GREEN & YELLOW
E
L
N
BROWN
BLUE
CORD CLAMP
P1041
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
earth symbol
or coloured green and yellow.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners,
chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries
around the world.
© Electrolux plc 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
|