WASHING MACHINE
FJ 1094 G
1
0
0
0
RINSE
HOLD
QUICK
WASH
ON-OFF
124983292
INSTRUCTION BOOKLET
Download from Www.Somanuals.com. All Manuals Search And Download.
Im portant Safety Inform ation
It is m ost im portant that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you m ove
house and leave the appliance, always ensure that the book is supplied with the appliance in
order that the new owner can get to know the functioning of the appliance and the relevant
warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully
before installing or using the appliance.
Inst allat io n
Use
■
■
This appliance is heavy. Care should be taken when
Always unplug the appliance and turn off the water
moving it.
supply after use.
■
■
■
It is dangerous to alter the specifications or attempt
to modify this product in any way.
Do not overload the appliance. See relevant section
in the instruction book.
■
All packing and transit bolts must be removed before
Only wash fabrics which are designed to be machine
washed. If in doubt, consult the care label on the
clothes.
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in instructions.
■
Before washing, ensure that all pockets are empty
and buttons and zips are fastened. Avoid washing
frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras
must NOT be machine washed.
■
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
■
Any electrical work required to install this appliance
■
■
should be carried out by a qualified electrician or
competent person.
Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause
extensive damage and must not be placed into the
machine.
■
Care must be taken to ensure that the appliance does
not stand on the electrical supply cable.
Garments which have been in contact with volatile
petroleum products should not be machine washed.
If volatile cleaning fluids are used, care should be
taken to ensure that the fluid is removed from the
garment before placing in the machine.
■
If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely.
Child Safet y
■
■
■
Wash small items such as socks, laces, washable
belts etc in a washing bag or pillow case as it is
possible for such items to slip down between the tub
and the inner drum.
■
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
■
Pets and children have been known to climb into
washing machines. Please check your drum before
use.
Only use the advised quantities of fabric softener.
Damage to the fabric can ensue if you over-fill.
Refer to the manufacturer’s recommendations of
quantities.
■
The glass door becomes very hot during the washing
cycle. Keep children away from the vicinity of the
appliance whilst it is in operation.
As some duvets and eiderdowns should be washed in
large commercial machines because of their bulk,
please check with the manufacturer of the item
before washing in a domestic machine.
Keep all packaging well away for children.
■
Keep all detergents in a safe place out of children’s
■
reach.
■
■
Leave the porthole door slightly ajar between washes
to preserve the door seal.
Under no circumstances should you attempt to repair
the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Zanussi Service
Force Centre. Always insist on genuine Zanussi
spare parts.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Con t en t s
Fo r t he User
Fo r t he Inst aller
Your New Washing Machine
Im portant Safety Inform ation
2
3
Installation Instructions
Technical Specifications
21
21
Description of the Appliance
Door locked light
Detergent dispenser drawer
5
5
5
Unpacking
Positioning
Water inlet
Water drainage
Levelling
Special conditions
In the interest of the environment
Electrical connection
22
22
23
23
24
24
24
25
The Control Panel
6
Operating sequence
Washing 4.5 kg of withe cotton at 95°C
Load the laundry
Measure out the detergent
Measure out the fabric softener
Select the required option
Select the required programme
Start the machine
7-10
7
7
7
7
7
8
8
At the end of the programme
8
Washing 2 kg of synthetic fabrics at 40°C
Load the laundry
Measure out the detergent
Measure out the fabric softener
Select the required option
Select the required programme
Start the machine
9
9
9
9
9
10
10
10
At the end of the programme
Washing Hints
Which detergent to use?....
And in which form?
11-12
12
12
Use of detergent and additives
12
Wash Care Sym bols
13
Washing Program m es
14-15
Maintenance and Cleaning
Descaling
After each wash
16-17
16
16
External cleaning
16
16
16
17
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the filter
The dangers of freezing
17
Som ething Not Working
18-19
19
Service and Spare Parts
Peace of Mind for Twelve Months
20
Gu id e t o u se t he Inst r u ct io n Bo o k
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
i
Hints and tips
Environm ental inform ation
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Descript ion of t h e Applian ce
1 Detergent dispenser drawer
1
3 4
5 6
2 Programme guide
3 “Options” buttons
4 “ON/OFF” button
5 “Mains-on” light
6 Programme selector dial
7 Door locked light
8 Door opening handle
9 Filter
1
0
0
0
2
10 Adjustable feet
7
8
9
10
Do o r lo cked light
The door stays locked throughout the wash cycle, which
is indicated by a light located next to the door handle.
The door cannot be opened until the light has gone out.
Det ergent d isp enser d rawer
Prewash
Wash
Fabric softener
P0260
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The Control Panel
1 0 0 0
RINSE
HOLD
QUICK
WASH
ON-OFF
1
2 3 4
5
6
1 Program m e gu id e
4 ON /OFF b u t t o n
By depressing this button the machine starts operating.
When depressing it again, the machine stops.
2 RIN SE HOLD b u t t o n
Press this button to make the machine stop with water in
the drum after the synthetic or delicate wash cycles.
This prevents any creasing which may take place if the
clothes are left damp in the drum. When it is convenient
for you to empty the machine, simply press this button
again so that the machine can proceed to drain and short
spin, or turn the dial to the drain programme "P".
If this button is not activated, the washing programmes
will end with a short spin.
5 Mains-o n light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
6 Program m e select o r d ial
With the programme selector dial you choose the
desired washing programme. Press this dial to pop it out
and then turn it clockwise.
Do not press this button for woollens: wool items should
be gently spun.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button.
3 QUICK WASH b u t t o n
By depressing this button on programmes A, B, C and F
the wash time will be reduced by approx. 20 mins.
This is suitable only for garments which are lightly
soiled.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 4.5 KG OF WHITE COTTON AT 95°C
Suppose you have 4.5 kg of normally dirty laundry to
wash. It is white cotton and is suitable for high
temperature washing.
1. Lo ad t he lau nd r y
Open the door by pulling the catch outward.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
P0004
2. Measu re o u t t he d et ergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
.
If you wish to carry out the extra prewash, pour
detergent into the appropriate compartment marked
.
P0223
3. Measu re o u t t he fab r ic
so ft ener
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
P0226
4. Select t he req u ired o p t io n
Depress QUICK WASH button, depending on the
selected programme and the degree of soil.
RINSE
HOLD
QUICK
WASH
ON-OFF
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select t he req u ired p rogram m e
Turn the programme selector dial clockwise to the
required programme.
A
P0451
6. St ar t t he m achine
Before starting up the machine check that:
■
the appliance is plugged in
■
the water supply taps are turned on
■
the drain hose is correctly and securely positioned
■
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light and
door locked light will illuminate and the machine starts
operating.
P0471
7. At t he end o f t he p rogram m e
The machine stops automatically.
The door is controlled by a safety device which releases
2 minutes after the end of the programme. The door
locked light will go out.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light will go out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
WASHING 2 KG OF SYNTHETIC FABRICS AT
40°C
Suppose you have 2 kg of synthetic fabric laundry to
wash. They are rather delicate fabrics and should not be
washed at a high temperature.
1. Lo ad t he lau nd r y
Open the door by pulling the catch outward.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
P0004
2. Measu re o u t t he d et ergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment
.
P0223
3. Measu re o u t t he fab r ic
so ft ener
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the “MAX”
mark in the drawer).
Close the drawer gently.
P0226
4. Select t he req u ired o p t io n
Depress the RINSE HOLD button if required.
RINSE
HOLD
QUICK
WASH
ON-OFF
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select t he req u ired p rogram m e
Turn the programme selector dial clockwise to the
required programme.
H
P0527
6. St ar t t he m achine
Before starting up the machine check that:
■
the appliance is plugged in
■
the water supply taps are turned on
■
the drain hose is correctly and securely positioned
■
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light and
door locked light will illuminate and the machine starts
operating.
P0471
7. At t he end o f t he p rogram m e
The machine stops automatically.
If you have depressed the rinse hold button, the
machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water
release the same button (the clothes will be gently spun)
or select programme P.
The door is controlled by a safety device which releases
2 minutes after the end of the programme. The door
locked light will go out.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light will go out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Hints
i
■
Do NOT overload the machine. Weigh the laundry the
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special pre-
soak product or biological detergent.
first few times you use the appliance.
The average weights of the most common items are
listed below as a guide:
1000g = 1 kg
■
■
Only wool marked “Pure New Wool - washable,
preshrunk” can be washed in the machine using the
wool programme; other types of wool should be
washed by hand or dry cleaned.
Sheet
700-1000 g
100-200 g
400-500 g
50-100 g
Pillow case
Tablecloth
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
Serviette
Tea towel
70-120 g
Linen hand towel
Towelling hand towel
Towelling bath towel
Bath robe
100-150 g
150-250 g
700-1000 g
1000-1500 g
200-300 g
150-200 g
■
Once you have finished using the machine, you are
advised to unplug it and turn off the water taps.
Man’s shirt
Apron
« JETSYSTEM» wash
This appliance is equipped with a wash system called
«JETSYSTEM».
The laundry is always kept damp with water and
detergent, using a very efficient pump. In this way water
consumption is greatly reduced.
Further savings can be made by washing small loads of
laundry, since the water and electricity consumption is
proportional to the quantity of laundry being washed.
■
Load the laundry loosely alternating large items with
small ones.
■
■
■
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
Avoid washing unhemmed or torn items as they may
unravel.
As the Jetsystem is flexible and adjusts water intake
according to wash load size it is not possible to give you
exact recommandations as to the amount of detergent
that should be used for any one wash.
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys, screws
etc). as these could damage the drain pump.
■
■
■
When washing curtains, remove the hooks.
Therefore we recommend that you use approximately
1/3 less than the detergent manufacturer recommends on
the packet or bottle, making the appropriate allowances
for soft or hard water, and light or heavy soilage of
clothes. If you have judged the amount correctly you
should expect to see a soft sudsy liquid during the wash.
It is not necessary to have a head of lather on the water.
Close poppers and zips and fasten loose buttons.
It is essential to wash new coloured items separately
when washing for the first time.
■
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
■
■
■
White items should not be washed with coloured
items.
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow case.
Use a good quality detergent suitable for automatic
washing machines.
■
■
Use the correct quantities of detergent.
For wool, use gentle detergent only in small
quantities.
■
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
And in w hich fo r m ?
Which d et ergent ?....
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is to
own personal choice.
To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents recommended
for use in automatic machines.
To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol
the machine immediately upon placing the detergent in
the dispenser drawer.
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
WHITES
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
, start
NON BIOLOGICAL
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
COMPACT POWDERS AND LIQUIDS
Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the detergent
into the specially designed dosing device* which should
be placed on top of the laundry, and at the back of the
machine drum.
COLOUREDS
For coloured items you should use a
detergent which is designed to clean
while maintaining the original colour.
Ariel Color does not contain bleach
and therefore helps to preserve
colours.
* If you use a dosing device in a washer dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
DELICATE ITEMS
FABRIC CONDITIONERS
When washing delicates such as
woollens, you should use a product
which is specially designed to care for
fine fabrics.
These are ideal for improving ‘softness’, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
Dreft Automatic is suitable for
woollens and other delicates.
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
LAUNDRY BLEACH
For additional stain removal you may
wish to use a product such as Ace
Gentle Bleach which is used in addition
to your chosen detergent. Ace is
suitable for all washable fabrics
including silks, woollens and coloureds.
marked with the symbol
.
Follow the manufacturer’s dosage
instructions and never exceed the
MAX level.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash Care Sym bols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
FABRIC
White Cotton or Linen
without Special Finishes
Normal (Maximum)
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
Normal (Maximum)
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.
Reduced (Medium)
Normal (Maximum)
Reduced (Medium)
50
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
Much Reduced (Minimum)
Hand wash only
Wool, wool mixtures, Silks
Do not machine wash
BLEACHING
Chlorine bleach may be used
IRONING
Cotten, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Hot iron
Warm iron
Cool iron
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
P
TUMBLE DRYING
May be tumble dried
with high heat setting
with low heat setting
A cross through any symbol means «DO NOT»
X
Im p o r t ant N o t es
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
fabric conditioner to avoid the conditioner entering the
machine prematurely.
Once the dispenser has been filled, close it by pushing it
in gently. This is particularly important if you are using
When using liquid detergent and a prewash programme,
place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Program m es
Programmes for cotton and linen
Degree of soil
and type of laundry
Programme dial
position
Possible Max.
Wash programme
Description
option
load
Heavily soiled items
except wool
Prewash at 40 °C
Short spin at 650 rpm
PREWASH ONLY
4.5 kg
Q
A
White cotton, for
Wash at 95 °C
4 rinses
Long spin at 1000 rpm
example normally soiled
work garments, sheets,
household linen,
4.5 kg
4.5 kg
BOILWASH
underwear, towels.
Fast coloured cotton or
linen fabrics, shirts,
underwear, towels.
Wash at 60 °C
4 rinses
Long spin at 1000 rpm
FAST
COLOUREDS
B(*)
Non fast coloured
cotton or linen fabrics,
shirts, blouses,
Wash at 40 °C
4 rinses
Long spin at 1000 rpm
NON- FAST
COLOUREDS
4.5 kg
4.5 kg
C
D
underwear.
Separate spin for
cotton and linen items
SPIN 1000
Long spin at 1000 rpm
(*) This 60°C programme is the reference programme for the Energy label according to EEC Directive 92/75:
Water 60 litres
Energy 1.2 kWh
Time 125 mins
Water filling: 30°-40° programmes: cold water filling
50°-60°-95° programmes: hot and cold fillingWater filling
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Program m es
Programmes for synthetics, delicates and wool
Degree of soil
and type of laundry
Programme dial
position
Possible
option
Max.
load
Wash programme
Description
Synthetic or mixed
fabrics, underwear,
coloured garments,
non-shrink shirts,
blouses.
Wash at 50 °C
3 rinses
Short spin at
650 rpm
MIXED
FABRICS
2 kg
F
Synthetic or mixed
fabrics, underwear,
coloured garments,
non-shrink shirts,
blouses.
Wash at 40 °C
3 rinses
Short spin at
650 rpm
MIXED
FABRICS
2 kg
2 kg
G
H
Wash at 40 °C
3 rinses
Short spin at
650 rpm
Delicate fabrics, for
example curtains
DELICATES/
SYNTHETICS
Specially tested
programme for wool
garments bearing the
“Pure new wool, non-
shrink, machine
Wash at 40 °C
3 rinses
Short spin at
650 rpm
WOOL
1 kg
J
washable” label.
Wash at 30 °C
3 rinses
Short spin at
650 rpm
Lightly soiled synthetic
or delicate items
WORN ONCE
2 kg
2 kg
2 kg
2 kg
-
K
L
30
3 rinses, with fabric
softener, if required
Short spin at
This programme can be
used for rinsing hand
washed garments.
HAND RINSES
FRESHEN UP
650 rpm
1 rinse, with fabric
softener, if required
Short spin at
For softening hand
washed garments
M
N
P
650 rpm
Draining of water
and short spin at
650 rpm
Separate spin for
synthetics and delicates
SPIN 650
For emptying out the
last rinse water in
programmes with the
Rinse Hold option.
DRAIN
Draining of water
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the electricity
supply.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
Aft er each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Ex t er nal cleaning
Clean the exterior cabinet of the appliance with soap
and water only, and then dry thoroughly.
Cleaning t he d isp enser d rawer
From time to time the washing powder and additive
dispenser drawer should be cleaned.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.
Cleaning t he d rawer recess
Having removed the drawer, use a small brush to clean
P0224
P0225
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme for a
few minutes without any clothes in the drum.
P0038
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning t he filt er
The water drain filter
A clean filter is important for the correct functioning of
the machine, and should therefore be cleaned after every
washing programme.
Open the filter door and place a container underneath to
catch any spillage. If the filter is blocked and the
machine is unable to drain you will need to drain the
water manually from the machine at this stage. To do
this, unhook the drain hose from the standpipe or sink
and hold the end of the hose over a bowl on the floor.
The water should drain by gravity into the bowl. When
the bowl is full, hook the hose back up and empty the
bowl. Repeat the procedure until water stops flowing
out.
P0132
P0011
Unscrew and remove the filter.
Clean carefully under a fast running tap.
Warning
When the appliance is in use and depending on the
programme selected there can be hot water in the filter.
Never remove the filter during a wash cycle, always
wait until the appliance has finished the cycle, and is
empty. When replacing the filter, ensure it is securely
retightened so as to stop leaks and young children being
able to remove it.
P0133
P0040
The water inlet filters
If your water is very hard or contains traces of lime
deposit, the water inlet filters may become clogged.
It is therefore a good idea to clean them from time to
time.
Turn off the water taps. Unscrew the water inlet hoses.
Remove and clean the filters using a hard bristle brush.
Replace the filters and tighten up the inlet hoses.
P0041
The d anger s o f freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
■
Turn off the water taps.
■
Unscrew the inlet hoses.
■
Unhook the drain hose from the rear support and
position the end of this hose and that of the inlet
hoses in a bowl. Run the draining programme.
■
Disconnect the appliance.
■
Screw the inlet hoses and reposition the drain hose.
■
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Som ething Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out
an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
Sym ptom
Possible causes
■
The machine does not start
The door has not been closed.
The plug is not properly inserted in the power socket.
There is no current at the socket
The main fuse has blown.
The selector dial is not correctly positioned.
The ON/OFF button has not been depressed.
■
■
■
■
■
■
The machine does not fill
Ensure the water taps are open.
The filters in the inlet hoses are blocked.
The inlet hoses may be squashed or kinked.
The door has not been closed.
■
■
■
■
The machine fills then empties
immediately
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
■
■
■
The machine does not empty and/or
does not spin
The drain hose may be squashed or kinked.
The RINSE HOLD option has been selected.
The drain filter may be blocked.
The drain hose extension is not correct. Follow the instructions for
■
■
■
connecting to the waste.
The drainage system pipes are blocked.
The wash load is unbalanced: redistribute the clothes inside the drum to
■
■
allow the machine to spin.
■
There is water on the floor
Too much detergent or unsuitable detergent has been used (creates too
much foam).
■
Check whether there are any leaks from one of the inlet hose(s) fittings.
It is not always easy to see this as the water runs down the hose; check
to see if it is damp.
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
■
■
■
■
Unsatisfactory washing results
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
Stubborn stains have not been treated prior to washing
The correct wash programme has not been selected.
Too much laundry has been placed in the drum.
■
■
■
■
The machine vibrates when spinning
The internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not level.
The washing load is badly distributed in the drum.
■
■
■
■
Maybe there is very little laundry in the drum.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Sym ptom
Possible causes
■
The door will not open
The programme is still running.
The door lock has not yet released (door pilot light on).
Water in the tub: the door cannot be opened if water is present in the
■
■
tub.
■
The electronic unbalance detection device has cut in because the
Spinning starts late or the machine
does not spin
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 10 minutes, the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case, redistribute the load
manually and reselect the spin programme.
■
The machine makes an unusual
noise
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures a
softer start and more even distribution of the laundry in the drum when
spinning, as well as increased stability of the machine.
■
No water is visible in the drum
Machines based on modern technology operate very economically
using very little water without affecting performance.
If after the above checks, there is still a fault, call your
local Zanussi Service Force Centre.
CUSTOMER CARE
For general enquiries concerning your Zanussi appliance
or for further information on Zanussi products, please
contact our Customer Care Department by letter or
telephone as follows:
In-guarantee customers should ensure that the
above checks have been made as the engineer will
make a charge if the fault is not a mechanical or
electrical breakdown. Please note that proof of
purchase is required for any in-guarantee service
calls.
Customer Care Department
Zanussi
SERVICE & SPARE PARTS
Zanussi House
If you require an engineer or wish to purchase spare
parts contact your local Zanussi Service Force Centre
by telephoning:
Hambridge Road - Newbury - Berkshire - RG14 5EP
Tel 01635 521313
08705 929929
Your telephone call will be routed to the Service Centre
covering your post code area.
Further information can be found in the accompanying
customer care booklet and also in your telephone
directory under “Z”.
When you call the Service Force Centre please make
sure you give the model and serial number of the
appliance.
This information can be found on the rating plate (see
picture) or on the guarantee card.
Mod.
..........
Ser.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Peace of Mind for Twelve Months
St and ard gu arant ee co nd it io ns
Ex clu sio ns
We, Zanussi Limited undertake that if, within 12 months
of the date of the purchase, this Zanussi appliance or
any part thereof is proved to be defective by reason only
of faulty workmanship or materials, we will, at our
option, repair or replace the same FREE OF ANY
CHARGE for labour, materials or carriage on condition
that:
This guarantee does not cover:
■
Damage or calls resulting from transportation,
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.
■
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
■
The appliance has been correctly installed and used
■
Appliances found to be in use within a commercial
only on the electricity supply stated on the rating
plate.
environment, plus those which are subject to rental
agreements.
■
The appliance has been used for normal domestic
■
Products of Zanussi manufacture which are NOT
purposes only, and in accordance with the
manufacturer’s instructions.
marketed by Zanussi Ltd.
■
The appliance has not been serviced, maintained,
Eu ro p ean gu arant ee
If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:
repaired, taken apart or tampered with, by any
person not authorised by us.
All service work under this guarantee must be
undertaken by a Zanussi Service Force Centre.
Any appliance or defective part replaced shall become
the Company’s property.
The guarantee starts from the date you first
purchased your product.
■
This guarantee is in addition to your statutory and other
legal rights.
The guarantee is for the same period and to the same
extent for labour and parts as exists in the new
country of use for this brand or range of products.
■
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
The guarantee relates to you and cannot be
transferred to another user.
■
Your new home is within the European Community
■
(EC) or European Free Trade Area.
The product is installed and used in accordance with
■
our instructions and is only used domestically, i.e. a
normal household.
The product is installed taking into account
■
regulations in your new country.
Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look
after you and your appliances.
France
Germany
Italy
Senlis
+33 (0)344 62 29 99
+49 (0)911 323 2600
+39 (0)1678 47053
+46 (0)8 738 79 50
+44 (0)1635 521313
Nurnberg
Pordenone
Stockholm
Newbury
Sweden
UK
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Technical Specifications
DIMENSIONS
Height
Width
Depth
85 cm (33.5”)
60 cm (23.6”)
57 cm (22.4”)
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
220-240 V/50 Hz
2550 W (13A)
Minimum (hot)
Minimum
Maximum
0.35 bar (3.5 N/cm2)
0.48 bar (4.8 N/cm2)
07.6 bar (76 N/cm2)
WATER PRESSURE
MAXIMUM RECOMMENDED LOAD
Cotton, linen
Synthetics
Delicate fabrics
Wool
4,5 kg (10 lbs)
2 kg (4.5 lbs)
2 kg (4.5 lbs)
1 kg (2.2 lbs)
SPIN SPEED
Maximum
1000 rpm
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Unp ack ing
Before starting the machine up, the packing must be
removed as follows.
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
Using a spanner unscrew and remove the rear right bolt.
Lay the machine gently on its back, making sure that the
hoses are not squashed.
P0255
Remove the polystyrene block from the bottom of the
machine.
Carefully slide out the right polythene bag (1).
Repeat the operation for the left polythene bag (2).
2
1
P0233
P0234
Remove the polystyrene base.
Set the machine upright and remove the two remaining
bolts from the back.
Pull out the three plastic spacers from the holes into
which the bolts were fitted.
Plug the open holes with the plugs which you can find
at the back of the appliance.
P0256
P0020
Po sit io ning
Your new washing machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to suitable existing taps with the drain
hose discharging into a sink.
The appliance has two inlet hoses, hot and cold, with
female 3/4” BSP thread connectors. If this connection is
not compatible with the plumbing of the existing
installation, a variety of connectors are available from
good hardware stores and plumbers merchants to suit
most domestic plumbing. Any alteration to your existing
plumbing must be carried out by a competent person, or
qualified plumber.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Wat er inlet
The inlets on the back of the appliance are colour coded,
blue for cold and red for hot.
Before connecting the hoses be sure to fit the mesh
filters «A» supplied as per diagram.
A
If only a cold water supply is available, connect the two
hoses to a cold water outlet by means of a «Y»
connection piece.
P0003
P0021
Installation should comply with local water authority
and building regulations’ requirements.
The appliance must be given a separate cold water
supply and not be connected to a mixer tap, a single
outlet water heater or a booster pump. A minimum
water pressure of 0.48 bar is required for safe operation
of the appliance.
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
There should be a minimum distance of 5.02m
(161/2 ft) between the appliance’s inlet and the bottom
of the water storage tank.
There will be sufficient pressure for the hot water
supply, providing there is a minimun height of 2.74
metres (9 ft) between the bottom of the cold water
storage tank and the bottom of the hot water cylinder.
Set the hoses correctly by loosening the ring nuts. After
positioning the inlet hoses, be sure to tighten the ring
nuts again to prevent leaks.
Wat er d rainage
This appliance is designed to be permanently plumbed
into your home's water supply and drainage system.
3 pin
The appliance drain hose should hook into a standpipe
with an internal diameter of approximately 38mm
(see diagram) thus ensuring there is an air break
between the drain hose and standpipe.
When discharging into a standpipe ensure that the top of
the curve in the hose end is no more than 90cm (35.4'')
and no less than 60cm (23.6'') above floor level. The
upright standpipe should have a minimum length of
30cm (12'') from the bottom of the elbow to the top of
the pipe (see diagram).
P1039
1
38 mm.(1/2") diameter
standpipe
Make sure that it is designed in such a way, that the end
of the drain hose cannot be covered with water.
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece
is available from your local Service Force Centre.
The joining piece must have an internal diameter of 18mm.
P1040
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Im portant
Before connecting up the machine to new pipework or
to pipework that has not been used for some time, run
off a reasonable amount of water to flush out any debris
that may have collected in the pipes.
Levelling
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level.
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the machine during operation.
Some vibration is inevitable, especially if mounted on a
wooden floor.
P0850
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
Sp ecial co nd it io ns
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
Warning
The machine should NOT be placed on deep pile
carpeting.
Note
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
In t he int erest o f t he
enviro nm ent
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
SHOWER
SINK TOILET
BATH
BIDET
WASHING
MACHINE
DISHWASHER
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
If you require any further advice please contact your
local authority drainage department.
RAINWATER
'RUN-OFF'
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
FOUL SEWERS
SEWAGE
TREATMENT
WORKS
UNTREATED
DISCHARGE
TREATED
DISCHARGE
RIVER
RIVER
P0987
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Elect r ical co nnect io n
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability should
this safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
Mod.
..........
Ser.
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1362) fuse must
be used.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
- Earth
- Neutral
- Live
GREEN & YELLOW
E
Brown
L
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
N
earth symbol
or coloured green and yellow.
BROWN
The wire coloured blue must be connected to the
terminal «N» or coloured black.
BLUE
CORD CLAMP
P1041
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure over
the outer sheath.
WARNING:
A cut off plug inserted into a 13 amp socket is
a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of safely.
Per m anent co nnect io n
In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.
The switch must not break the yellow and green earth
cable at any point.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Z
Download from Www.Somanuals.com. All Manuals Search And Download.
|