Zanussi Washer 132985450 User Manual

132985450.qxd 18/07/2005 17:47 Pagina 1

WASHING MACHINE

ZJ 1218

1200

SPECIAL

COTTON

95º

900

700

500

60ºE

60º

40ºE

40º

SPIN

SPEED PREWASH DAIL

QUICK

WASH

SUPER

RINSE

EASY

IRON

DELA

START

AUSE

ON/OFF

30º

WOOL

30º

60º

40º

60ºE

30º

40º

30º

40º

DELICATES

SYNTHETICS

Quick Installation Guide:

visit our WEB SITE to view an install video

www.video.uk.electrolux.com

INSTRUCTION BOOKLET

132985450

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 3

Contents

Maintenance and Cleaning

Descaling

18-19

For the User

Important Safety Information

Your New Washing Machine

After each wash

Maintenance Wash

External cleaning

Cleaning the dispenser drawer

Cleaning the drawer recess

Cleaning the filter

The dangers of freezing

Emergency emptying out

Description of the Appliance

Detergent dispenser drawer

Child safety feature

18-19

The Control Panel

6-9

Programme information

Something Not Working

Service and Spare Parts

Guarantee conditions

20-21

21-22

Operating sequence

11-12

Load the laundry

Measure out the detergent and the fabric softener

Switch the machine on

Select the required programme

Select the Spin speed or the RINSE HOLD option 11

For the Installer

Select the required options

Select the DELAY START

Start the programme

Installation Instructions

Technical Specifications

At the end of the programme

Unpacking

24-25

25-26

Positioning

Water inlet

Washing Hints

Which detergent?....

And in which form?

13-14

Water drainage

Levelling

Special conditions

In the interest of the environment

Electrical connection

Building-in

Wash Care Symbols

Washing Programmes

16-17

28-29

Guide to use the Instruction Book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions

Hints and tips

Environmental information

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 4

Your New Washing Machine

Your new washing machine fitted with the Zanussi “JET SYSTEM”, meets all modern

requirements for effective treatment of laundry with low water, energy and detergent

consumption.

Even small loads are washed “economically” because the amount of water used is regulated

automatically according to the load and type of fabric.

●

Automatic cooling of the wash water to 60°C

In the interest of the

before draining, with the 95°C programme. This

reduces thermal shock to fabrics, helping to prevent

creasing.

environment

●

Materials marked with the symbol

recyclable.

are

●

The special wool programme with its new delicate

wash system treats your woollens with extreme care.

●

Check with your local Council or Environmental

Health Office to see if there are facilities in your area

for re-cycling this appliance.

The balance control device ensures that the

washing machine remains stable when spinning.

When the appliance is to be scrapped, cut off the

power supply cable and make the door lock device

unusable to prevent young children from being

trapped inside.

Ecological hints

To save water and energy and help protect the

environment, we recommend that you follow these

hints:

●

Help to keep your country tidy - use authorised

disposal sites for your old appliance.

●

Adjust the quantity of detergent according to the

hardness of your water supply, the amount of

laundry and the degree of soiling.

The symbol

on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over to

the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help

prevent potential negative consequences for the

environment and human health, which could

otherwise be caused by inappropriate waste handling

of this product. For more detailed information about

recycling of this product, please contact your local

city office, your household waste disposal service or

the shop where you purchased the product.

●

Select an “economy” programme for lightly soiled

laundry.

●

A programme without prewash is sufficient for

normally soiled laundry.

●

The machine works more economically if it is fully

loaded.

●

With adequate pre-treatment, stains and limited

soiling can be removed; the laundry can then be

washed at a lower temperature.

How do we help to protect the environment?

We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.

If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly

distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the

wash load manually and select a spin programme. For more detailed information see the section headed "Something

Not Working".

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 5

Description of the Appliance

1 Detergent dispenser drawer

2 Programme guide

1200

SPECIAL

COTTON

95º

900

700

500

3 Control panel

4 Door opening handle

5 Filter

60ºE

60º

40ºE

40º

SPIN

SPEED PREWASH DAIL

QUICK

WASH

SUPER

RINSE

EASY

IRON

DELAY

START

PAUSE

ON/OFF

30º

WOOL

30º

60º

40º

60ºE

30º

40º

30º

40º

DELICATES

SYNTHETICS

6 Adjustable feet

Detergent dispenser drawer

Prewash

Main wash

Fabric softener

Programme chart

P0239S

Child safety feature

This machine incorporates a special child safety feature

to prevent small children from being trapped inside the

machine.

To activate this device, rotate the button (without

pressing it) inside the door clockwise until the groove is

horizontal. If necessary use a coin.

P1131

To disable this device and restore the possibility of

closing the door, rotate the button anti-clockwise until

the groove is vertical.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 6

The Control Panel

1200

900

700

500

SPECIAL

COTTON

95º

60ºE

60º

40ºE

40º

QUICK

WASH

SUPER

RINSE

EASY

IRON

DELAY

START

PAUSE

SPIN

SPEED PREWASH DAILY

ON/OFF

30º

WOOL

30º

60º

60ºE

40º

30º

40º

30º

40º

DELICATES

SYNTHETICS

5 6 7 8 91011

1 Detergent dispenser drawer

2 Mains-on light

This light comes on when the ON/OFF button is

pressed, and goes out when it is pressed again.

Rinse Hold

When RINSE HOLD option is selected, the last rinse

water is not emptied out, to prevent the fabrics from

creasing. When the programme has finished, the light

of the START PAUSE button and the pilot light

(DOOR) go out, the light

and the pilot light

(END) are alight to

indicate that the water must be emptied out.

3 ON/OFF button

Press this button to switch the machine on. Press it

again to switch the machine off.

To empty out water there are 2 possibilities:

• Select programme

without spinning.

(draining):

The water is emptied out

Programme Option buttons

Depending on the programme, different functions can

• Select programme

reduce eventually

(spin) or

(delicate spin),

be combined. These must be selected after choosing the

desired programme and before depressing the START

PAUSE button.

When these buttons are pressed, the corresponding pilot

lights come on. When they are pressed again, the pilot

lights go out.

the spin speed by means of the relevant button and

then depress the START/PAUSE button.

The water is emptied out and the laundry is spun at

the selected spin speed.

Attention! Before selecting programmes

(Drain),

If an incorrect option is selected, the corresponding

pilot light flashes for about 2 seconds and the message

Err is displayed.

(Spin) or

(delicate spin), the selector dial has to

be positioned on X (cancelling).

5 PREWASH button

4 SPIN SPEED button

Press this button to reduce the maximum speed of the

final speed proposed by the machine for the selected

The machine performs a prewash cycle at 30°C max.

The prewash cycle ends with a short spin at 650 r.p.m.

in programmes for Cotton and Synthetics, and with

emptying of the water for Delicates.

programme or to select position

(RINSE HOLD) .

The light corresponding to the selected option

illuminates.

This option is not available with the WOOL/(handwash)

programme

and miniprogram

For use when washing heavily soiled laundry.

The following speeds are available for the different

fabrics:

• COTTON, linen: 500/700/900 max 1200 r.p.m.

6 DAILY button

This option can be used used for lightly soiled cotton

or synthetic items items in order to obtain a good

washing performance in a short time.

• SYNTHETICS and WOOL/(handwash)

500/700 max 900 r.p.m.

• DELICATES and MINIPROGRAMME

500 max 700 r.p.m.

This option cannot be used with the Economy

programmes 60°E and E°40 and Miniprogram

and

also not in combination with QUICK WASH option.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 7

Cancelling the delayed start

7 QUICK WASH button

This option can be used for lightly soiled cotton,

synthetic or delicate items hat have been used or worn

for a short time.

● Depress START PAUSE button.

● Depress DELAY START button until «0’» is

displayed.

● Depress START PAUSE button again, if you wish to

This option is not available with the WOOL/

restart the machine immediately.

(handwash)

programme, the Energy saving

programmes (60°E and 40°E) and Miniprogram

It cannot be used also in combination with DAILY

option.

11 START/PAUSE button

This button has two functions: Start - Pause

Start

8 SUPER RINSE button

After having selected the required programme, press this

button to start the machine; the corresponding pilot light

stops flashing.

This option can be selected with all programmes, except

and Miniprogram . The

the WOOL/ HANDWASH

If you have selected the delayed start, the machine

begins its countdown. The duration of the programme or

the delay appears on the display.

machine will add 2 rinses for cotton and 1 rinse for

synthetics and delicates.

This option is recommended for people who are allergic

to detergents and in areas where the water is very soft.

Pause

To interrupt a programme which is running, depress the

START PAUSE button: the corresponding pilot light

starts to flash.

9 EASY IRON button

Selecting this button the laundry is gently washed and

spun to avoid any creasing. In this way ironing is easier.

Furthermore the machine will perform 6 rinses instead

of 3 for cotton and 4 rinses instead of 3 for synthetics.

This function can be used only for cotton and synthetic

fabrics.

To restart the programme from the point at which it was

interrupted, press the START PAUSE button again.

12 DISPLAY

The display shows the following information:

If this option is selected for cotton programmes, the spin

speed automaticaly will reduce to 900 rpm.

Reset/Cancelling - Duration of the programme -

Delayed start - Incorrect option selection - Alarm

code - End of programme.

If this option is selected for synthetic programmes with

a temperature of 60°C or 50°C, the machine will perform

a washing cycle at max 40°C.

Reset/cancellation of the programme

If the programme selector dial is turned to X position,

three blinking dashes are displayed.

Now you can select a new programme.

10 DELAY START button

The wash programme can be delayed from 30 min - 60

min - 90 min, 2 hours and then by 1 hour up to a

maximum of 23 hours by means of this button.

(If the programme selector dial has not turned to X

position , when you press the ON/OFF button to switch

the machine on, the display will show a blinking zero.)

Selecting the delayed start

● Select the programme and the required options.

● Select the delay start.

● Depress START PAUSE button: the machine starts

its hourly countdown.

---

The programme will start after the selected delay has

expired. The DELAY START cannot be used with

(DRAIN),

(SPIN) or

(DELICATE SPIN)

programmes.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 8

Duration of the selected programme

After selecting a programme, the duration is displayed

in hours and minutes ( for example 2 .05 ).

Alarm codes

In the event of operating problems, some alarm codes

can be displayed, for example E 2 0 (see paragraph

“Something not working”).

2.05

E20

The duration is calculated automatically on the basis of

the maximum recommended load for each type of

fabric.

End of programme

When the programme has finished a flashing zero is

displayed. The door can be opened when the

(DOOR) pilot light has gone out and if the

HOLD) option has not been selected.

After the programme has started, the time remaining is

updated every minute.

(RINSE

Delayed start

The selected delay (23 hours max) set by means of the

relevant button appears on the display for 3 seconds,

then the duration of the previously selected programme

is displayed.

The countdown is updated every hour and, when remain

the last 2 hours, each 30 min.

DELAY

START

13 Programme progress display

By selecting the wash programme, the pilot lights

corresponding to the various phases making up the

programme come on.

After the machine has started, the

(DOOR) pilot

Incorrect option selection

light and only the running phase light illuminate and

stay on.

If an option which is not compatible with the set wash

programme is selected, the message Err is displayed for

2 seconds.

When the programme has finished, the

(END) pilot

light comes on and the the

pilot light goes off.

(DOOR)

DOOR

PREWASH

WASH

RINSES

DRAIN

SPIN

CLOGGED

FILTER

END

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 9

Functions

End of programme

The

(DOOR) pilot light indicates if during the

washing cycle the door can be opened:

When the

(END) pilot light on the programme

• Light on: the door can be opened

(when the washing machine is set to PAUSE, the

(DOOR) pilot light will go off).

progress display illuminates, if the

light has gone out, the the door can be opened (if the

(RINSE HOLD) option has not been selected).

(DOOR) pilot

Turn the programme selector dial to X.

Switch the machine off by depressing the ON/OFF

button before removing the laundry.

• Light off: the door cannot be opened

(when the washing machine is set to PAUSE, the

(DOOR) pilot light will start to flash)

The

(END) pilot light flashes in the event of

Altering an option or a running programme

It is possible to change any option before the

programme carries it out.

Before you make any change, you must pause the

washing machine by pressing the START PAUSE

button.

operating problems and the corresponding alarm code

appears on the display.

E 10

= the machine does not fill

= the machine does not empty

= the door has not been closed

E 2 0

E 40

Changing a running programme is possible only by

resetting it. Turn the programme selector dial to "X" and

then to the new programme position. The washing water

in the tub will not emptied out .

To eliminate the problem, see paragraph “Something not

working”.

If the

(FILTER CLOGGED) pilot light flashes at the

end of the programme this means that the drain filter

must be cleaned.

Start the new programme by depressing the START

PAUSE button.

Interrupting a programme

Depress the START PAUSE button to interrupt a

programme which is running: the corresponding light

starts to flash.

14 Programme selector dial

The selector is divided into 5 sections:

• COTTON,

Depress the same button to restart the programme.

• SYNTHETICS

• DELICATES

Opening the door after the programme has

started

You can open the door, after having set the washing

machine to PAUSE, provided the following conditions

exist:

• WOOL

(hand washing)

• Special programmes

• Reset programme X

SPECIAL

COTTON

• the washing machine has not heated beyond 55°C;

• the level of the water is not high;

• the drum is not turning.

95º

60ºE

60º

40ºE

40º

30º

If these requirements are met, the

will be on and, when you pause the washing machine, it

will goes out: the door can be opened.

(DOOR) pilot light

WOOL

30º

60º

60ºE

40º

30º

40º

30º

40º

DELICATES

SYNTHETICS

Should it not be possible to open the door, and should it

be absolutely necessary to do so, switch the machine off

by pressing the ON/OFF button.

The selector dial can be turned either clockwise or

anticlockwise.

Position E corresponds to the ENERGY SAVING

After approximately 3 minutes, you can open the door.

Pay attention to the level and temperatures of the

water in the washing machine!

programmes and position

to “cold wash”.

At the end of the programme the selector dial must

be turned to position X (reset).

When you close the door and press the ON/OFF button

again, the washing machine will resume the programme

from the point where it had been interrupted.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 10

Programme information

WOOL (HANDWASH

)

= Drain

For emptying out the water of the last rinse in

Washing programme for machine washable wool as

well as for hand washable woollens and delicate fabrics

with the “hand washing” care symbol.

programmes with the

RINSE HOLD option.

Turn first the programme selector dial to X, then select

programme

and depress the START PAUSE button.

= Delicate Spin

= Spin

Separate short spin at 700 rpm for hand washed

synthetics, delicate and wollen garments. You can

reduce the speed by means of SPIN SPEED button to

adapt it to the fabrics to be spun.

Separate long xspin at the maximum speed for hand

washed cotton garments. You can reduce the speed by

means of SPIN SPEED button to adapt it to the fabrics

to be spun.

= Rinses

= Miniprogramme

With this programme it is possible to rinse and spin

cotton garments which have been washed by hand.

The machine performs 3 rinses, followed by a final spin

at 1200 r.p.m.

This is a complete programme that can be combined

with the following options: SPIN SPEED, RINSE

HOLD

and delayed start .

The spin speed can be reduced by depressing SPIN

SPEED button.

To be used for laundry which is lightly soiled or which

needs freshening up.

Max load 3 kg.

= Softeners

Washing temperature 30°C

Programme duration 30 minutes

Final spin speed 700 r.p.m.

Hand washed cotton garments can be softened with this

programme.

The machine performs 1 rinse, followed by a final spin

at the max. speed, which can be reduced by depressing

SPIN SPEED button.

X = Cancelling

To reset a programme turn the selector dial to X. Now

can a new programme be selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 11

Operating Sequence

Before the first wash, we recommend that you run a

3. Switch the machine on

To switch the machine on, press the ON/OFF button: the

mains-on light comes on. The display will show three

flashing dashes or ablinking zero.

cotton cycle at 95°C, without any laundry in the

machine, to remove any manufacturing residue from the

drum and tub.

Pour 1/2 a measure of detergent into the main wash

compartment

machine.

of the dispenser drawer and start the

---

1. Load the laundry

Open the door by pulling the door handle outwards.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

ON/OFF

4. Select the required programme

Turn the programme selector dial to the desired

position: the display will show the duration of the

selected programme.

SPECIAL

COTTON

95º

P0004

60ºE

60º

40ºE

40º

2. Measure out the detergent

and the fabric softener

30º

2.05

WOOL

30º

60º

60ºE

40º

Pull out the dispenser drawer until it stops.

30º

40º

30º

40º

DELICATES

SYNTHETICS

Measure out the amount of detergent required and pour

it into the main wash compartment

If you have selected the PREWASH option, pour detergent

into the compartment marked

If required, pour fabric softener into the compartment

marked (the amount used must not exceed the

The lights corresponding to the different phases making

up the selected programme light on.

“MAX” mark in the drawer). Close the drawer gently.

5. Select the SPIN speed or RINSE

HOLD option

Depress the spin speed button to choose the required

speed or RINSE HOLD option

light comes on.

: the corresponding

1200

900

700

500

P0005

P0006

SPIN

SPEED

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 12

The machine starts operating. If a delayed start has been

selected, the countdown will start.

6. Select the required options

The light corresponding to the depressed button

illuminates.

START

PAUSE

QUICK

WASH

SUPER

RINSE

EASY

IRON

PREWASH DAILY

8. At the end of the programme

The machine stops automatically. The display shows a

blinking zero.

7. Select the DELAY START

To delay starting of the programme, press the DELAY

START button. The figures corresponding to the

selected delay will be displayed for about 3 seconds,

after which the duration of the selected programme will

appear on the display.

If the RINSE HOLD

door will be locked, the light of the START PAUSE

button and the (DOOR) pilot lights go out , the only

option has been selected, the

light remains lit to indicate that the water must be

drained before opening the door. The display shows a

flashing zero.

To empty out the water you can, after turning the

programme selector dial to X position:

DELAY

START

● select programme

(DRAIN), the water is emptied

out without spinning

● select programme

(SPIN) or

(DELICATE

SPIN). Select the spin speed by means of the relevant

button and then depress the START PAUSE button.

The water is emptied out and the laundry is spun at

the selected spin speed.

During this period it is possible to load other laundry:

● depress START PAUSE button;

● load the laundry;

At the end of the cycle, the light of the START/PAUSE

● close the door and depress START PAUSE button

again.

button and the

(DOOR) pilot light go out, and the

(END) light illuminates. The door can be opened.

Turn the programme selector dial to Reset X.

8. Start the programme

To start the selected programme, press the

Switch the machine off by pressing the ON/OFF button.

Remove the laundry from the drum and carefully check

that the drum is empty so as to avoid any forgotten

items being damaged in a subsequent wash (e.g.

shrinking) or their colour running into a load of whites.

START/PAUSE button; the corresponding light stops

flashing and the

(DOOR) pilot light illuminates.

The pilot light corresponding to the wash phase which is

running is on.

If you do not intend to carry out another wash, close the

water tap.

Leave the door open to prevent the formation of mildew

and unpleasant smells.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 13

Washing Hints

●

Do NOT overload the machine. Weigh the laundry the

Use a good quality detergent suitable for automatic

washing machines.

first few times you use the appliance.

●

Use the correct quantities of detergent.

The average weights of the most common items are

listed below as a guide:

For wool, use gentle detergent only in small

quantities.

1000g = 1 kg

●

Bleach is very corrosive; it should be used with care

and kept out of reach of children.

Sheet

700-1000 g

100-200 g

400-500 g

50-100 g

Some stains such as fruit, wine, grass, rust etc. are

difficult to remove and should be treated before

washing with specific products, which can be found

in most household shops. In some cases it may help

to soak the stain before washing with a special pre-

soak product or biological detergent.

Pillow case

Tablecloth

Serviette

Tea towel

70-120 g

Linen hand towel

Towelling hand towel

Towelling bath towel

Bath robe

100-150 g

150-250 g

700-1000 g

1000-1500 g

200-300 g

150-200 g

●

Only wool marked “Pure New Wool - washable,

preshrunk” can be washed in the machine using the

wool programme; other types of wool should be

washed by hand or dry cleaned.

The wool wash cycle of this machine has been

approved by Woolmark for the washing of machine

washable Woolmark products provided that the

garments are washed according to the instructions on

the garment label and those issued by the

Man’s shirt

Apron

manufacturer of this washing machine. M9605.

●

Load the laundry loosely alternating large items with

small ones.

●

If you have used the machine to wash, rinse or spin

only non-colour fast garments, there may be dye left

in the sump. To ensure any subsequent wash is not

contaminated with the dye, select and carry out a

rinse and spin programme, without any garments, to

ensure that any dye is removed from the sump.

●

Sort the laundry according to the type of fabric,

colour-fastness and how dirty it is.

Avoid washing unhemmed or torn items as they may

unravel.

●

Once you have finished using the machine, you are

advised to unplug it and turn off the water taps.

Before washing, empty all pockets of small objects

which may have been left inside (coins, keys, screws

etc). as these could damage the drain pump.

●

When washing curtains, remove the hooks.

«JETSYSTEM» wash

Close poppers and zips and fasten loose buttons.

As the Jetsystem is flexible and adjusts water intake

according to wash load size it is not possible to give you

exact recommandations as to the amount of detergent

that should be used for any one wash.

It is essential to wash new coloured items separately

when washing for the first time.

●

When washing fabrics requiring different wash

temperatures together, always select the lowest

temperature.

Therefore we recommend that you use approximately

1/3 less than the detergent manufacturer recommends on

the packet or bottle, making the appropriate allowances

for soft or hard water, and light or heavy soilage of

clothes. If you have judged the amount correctly you

should expect to see a soft sudsy liquid during the wash.

It is not necessary to have a head of lather on the water.

●

White items should not be washed with coloured

items.

Very small items (handkerchiefs, ribbons, socks etc)

should be washed in a washing bag or a pillow case.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 14

Which detergent?....

To ensure you obtain the best wash results from your

appliance, it is important to use the right detergent in

your everyday wash, and only detergents recommended

for use in automatic machines.

And in which form?

Not only are there different types of detergent, but they

are also available in different forms. Whether you chose

a powder or liquid in traditional or compact form is

your own personal choice.

To maintain the appearance of your clothes and

household textiles and to make them last longer you

should use different types of detergent for different

washes, whether for whites, colours or delicates.

TRADITIONAL POWDERS

Pour the powder directly into the dispenser drawer. Do

not sprinkle powder onto clothes in the machine drum.

TRADITIONAL LIQUIDS

Liquid can be placed in the main wash compartment of

the detergent drawer marked with the symbol

the machine immediately upon placing the

detergent in the dispenser drawer.

WHITES

We recommend the Ariel product

range which is biological and

designed to provide excellent

cleaning and stain removal even

at low temperatures.

, start

Alternatively the detergent is measured into the

specially designed dosing device* which should be

placed on top of the laundry, and at the back of the

machine drum.

NON BIOLOGICAL

If you prefer to use a non

biological detergent, which does

not contain enzymes we

recommend Fairy. Fairy provides

good cleaning and stain removal.

COMPACT POWDERS AND LIQUIDS

Compact detergents (or concentrates as they are also

known) are available in liquid or powder form, and

generally require a smaller dosage. Follow the

manufacturer’s instructions to ensure the most

economical usage. Pour the detergent directly into the

dispenser drawer, or alternatively measure the detergent

into the specially designed dosing device* which

should be placed on top of the laundry, and at the back

of the machine drum.

COLOUREDS

For coloured items you should use a detergent which is

designed to clean while maintaining the original colour.

Ariel Color does not contain bleach

and therefore helps to preserve

* If you use a dosing device in a washer dryer,

please ensure the dosing device/ball is removed

before carrying out a drying programme.

colours.

DELICATE ITEMS

When washing delicates such as

woollens, you should use a product which is specially

designed to care for fine fabrics.

Dreft Automatic is suitable for

woollens and other delicates.

FABRIC CONDITIONERS

These are ideal for improving ‘softness’, and also

reduce static cling on synthetics and make ironing

easier. They are available in two types:

For example Lenor liquid fabric

softener, for use in the washing

machine/washer dryer. The

liquid fabric softener should be

poured into the compartment

LAUNDRY BLEACH

For additional stain removal you may wish to use a

product such as Ace Gentle Bleach which is used in

addition to your chosen detergent. Ace is suitable for all

washable fabrics including silks,

marked with the symbol

Follow the

woollens and coloureds.

manufacturer’s dosage

instructions and never exceed the

MAX level.

Bounce conditioning sheets for use

in a tumble dryer. We recommend

the conditioning sheets are pinned

(using a safety pin) to an article

of laundry and placed in the

tumble dryer.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 15

Wash Care Symbols

Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling

code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct

programme on your washing machine.

WASHING SYMBOL

WASH ACTION

Normal (Maximum)

FABRIC

White Cotton or Linen

without Special Finishes

Cotton, Linen or Viscose

without Special Finishes

Colourfast at 60°C.

Nylon, Polyester/Cotton, Viscose

with Special Finishes, Cotton/

Acrylic Mix.

Reduced (Medium)

Normal (Maximum)

Reduced (Medium)

Cotton, Linen or Viscose

Colourfast at 40°C but not 60°C.

Acrylics, Acetate, Triacetate, Wool

mixes, Polyester/wool blends.

Wool, wool mixtures, Silks

Do not machine wash

Much Reduced (Minimum)

Hand wash only

BLEACHING

Chlorine bleach may be used

IRONING

Cotten, Linen, Viscose

Polyester mixtures, Wool

Acrylic, Nylon, Polyester

Hot iron

Warm iron

Cool iron

DRY CLEANING

May be dry cleaned. Other letters and/or a bar beneath the circle will

indicate the required process to the dry cleaner.

TUMBLE DRYING

with high heat setting

with low heat setting

May be tumble dried

A cross through any symbol means «DO NOT»

Important Notes

For best results, always use the dispenser drawer for

dispensing detergents and liquid additives.

Once the dispenser has been filled, close it by pushing it

in gently. This is particularly important if you are using

fabric conditioner to avoid the conditioner entering the

machine prematurely.

When using liquid detergent and a prewash programme,

place the detergent into the correct compartment in the

dispenser drawer, after the prewash has finished.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 16

Washing Programmes

Consumption*

Type of

fabric

Programme

description

Additional

functions

Max.

load

Section

Temp.

95°

Energy

Water

Time

min

kWh

SPIN SPEED/ R. HOLD 5 kg

PREWASH, DAILY

QUICK, SUPER RINSE

EASY IRON

1.9

140

COTTON

Whites

Wash at 95°C

3 rinses

Normal spin

Wash at 60°C

3 rinses

*COTTON

60°E

60°

SPIN SPEED/ R. HOLD

PREWASH,

Whites

5 kg

0.85

1.2

134

119

Economy

SUPER RINSE,

EASY IRON

Normal spin

Wash at 60°C

3 rinses

Normal spin

Whites and

Fast

coloureds

SPIN SPEED/ R. HOLD

PREWASH, DAILY

QUICK, SUPER RINSE

EASY IRON

COTTON

Wash at 40°C

3 rinses

5 kg

0.95

0.7

139

116

Coloureds

Economy

SPIN SPEED/ R. HOLD

PREWASH,

COTTON

40°E

SUPER RINSE,

EASY IRON

Normal spin

Non-fast

coloureds

Wash at 30°-40°

or cold wash

3 rinses

SPIN SPEED/ R. HOLD

PREWASH, DAILY

QUICK, SUPER RINSE

EASY IRON

30°-40°

(Cold)

Normal spin

Synthetics

SYNTHETICS

SPIN SPEED/ R. HOLD 2 kg

PREWASH, DAILY

QUICK, SUPER RINSE

EASY IRON

0.85

60°

Wash at 60°C

3 rinses

Delicate spin

Synthetics

SPIN SPEED/ R. HOLD

SYNTHETICS

2 kg

0.5

60°E

Wash at 40°C

3 rinses

PREWASH, SUPER R.

EASY IRON

Economy

Delicate spin

Synthetics

2 kg

0.45

Wash at 30°-40°C

or cold wash

3 rinses

SPIN SPEED/ R. HOLD

30°-40°

PREWASH, DAILY

QUICK, SUPER RINSE

EASY IRON

(Cold)

Delicate spin

SPIN SPEED/ R. HOLD

Wash at 30°-40°C

3 rinses

DELICATES

WOOL

30°- 40° Delicates

2 kg

0.55

0.40

PREWASH

QUICK, SUPER RINSE

Delicate spin

30°- 40° Wool

SPIN SPEED/ R. HOLD 1 k g

Wash at 30°-40°C

or cold wash

3 rinses

(Handwash)

(Cold)

Delicate spin

* The “Cotton Whites Economy” programme at 60°E C is the reference programme for the data entered in the

energy label, in compliance with EC 92/75 standards.

This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of

laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature

for each programme.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 17

Special Programmes

Consumption*

Selector

dial

position

Additional

functions

Max.

load

Programme Programme description

Time

min

Energy

kWh

Water

SPIN SPEED

Delicate Spin Separate spin at 700 rpm for

hand washed synthetics,

delicate and wollen

5 kg

garments

Rinses

SPIN SPEED/

RINSE HOLD

SUPER RINSE

EASY IRON

5 kg

0.1

3 rinses with liquid additive

if required

Long spin

Softeners

Drain

SPIN SPEED/

RINSE HOLD

1 rinse with softener

Long spin

5 kg

2 kg

Spin

SPIN SPEED

Mini

programme

0.3

Wash at 30°C

2 rinses

SPIN SPEED/

RINSE HOLD

Short spin at 700 r.p.m.

Reset

For cancelling the wash

programme which is

running

This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of

laundry, the temperature of the water supply and the ambient temperature.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 18

Maintenance and Cleaning

Before any maintenance or cleaning is carried out you

must DISCONNECT the appliance from the electricity

supply.

Descaling

The water we use normally contains lime. It is a good

idea to periodically use a water softening powder in the

machine. Do this separately from any laundry washing,

P0009

P0010

and according to the softening powder manufacturer's

instructions. This will help to prevent the formation of

lime deposits.

After each wash

Leave the door open for a while. This helps to prevent

mould and stagnant smells forming inside the appliance.

Keeping the door open after a wash will also help to

P1086

preserve the door seal.

Cleaning the drawer recess

Maintenance Wash

Having removed the drawer, use a small brush to clean

the recess, ensuring that all washing powder residue is

removed from the upper and lower part of the recess.

Replace the drawer and run the rinse programme

without any clothes in the drum.

With the use of low temperature washes it is possible to

get a build up of residues inside the drum.

We recommend that a maintenance wash be performed

on a regular basis.

To run a maintenance wash:

●

The drum should be empty of laundry.

●

Select the hottest cotton wash programme.

●

Use a normal measure of detergent, must be a

powder (such as Ariel Futur).

External cleaning

P0038

Clean the exterior cabinet of the appliance with soap

and water only, and then dry thoroughly.

Cleaning the filter

The water drain filter

Cleaning the dispenser drawer

The washing powder and additive dispenser drawer

should be cleaned regularly.

Remove the drawer by pressing the catch downwards

and by pulling it out. Flush it out under a tap, to remove

any traces of accumulated powder.

To aid cleaning, the top part of the additive

compartment should be removed.

A clean filter is important for the correct functioning of

the machine, and should therefore be cleaned after every

washing programme.

Place a container under the filter to catch any spillage. If

the filter is blocked and the machine is unable to drain

you will need to drain the water manually from the

machine at this stage. To do this, unhook the drain hose

from the standpipe or sink and hold the end of the hose

over a bowl on the floor. The water should drain by

gravity into the bowl. When the bowl is full, hook the

hose back up and empty the bowl. Repeat the procedure

until water stops flowing out.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 19

Unscrew and remove the filter.

The dangers of freezing

If the machine is exposed to temperatures below 0°C,

certain precautions should be taken.

●

Turn off the water tap.

●

Unscrew the inlet hose.

●

Unhook the drain hose from the rear support and

position the end of this hose and that of the inlet

hose in a bowl. Run the draining programme.

P0037

P0039

●

Disconnect the appliance.

●

Screw the inlet hose and reposition the drain hose.

Clean carefully under a fast running tap.

●

When you intend to start the machine up again,

make sure that the room temperature is above 0°C.

Emergency emptying out

If the water is not discharged, proceed as follows to

empty out the machine:

●

pull out the plug from the power socket;

P0040

●

close the water tap;

●

if necessary, wait until the water has cooled down;

●

Unscrew and remove the filter;

Warning

●

place a bowl on the floor. The water should drain by

When the appliance is in use and depending on the

programme selected there can be hot water in the filter.

Never remove the filter during a wash cycle, always

wait until the appliance has finished the cycle, and is

empty. When replacing the filter, ensure it is securely

retightened so as to stop leaks and young children being

able to remove it.

gravity into the bowl. When the bowl is full, empty

the bowl. Repeat the procedure until water stops

flowing out;

●

clean the filter if necessary as previously described;

●

screw the filter again.

The water inlet filter

If your water is very hard or contains traces of lime

deposit, the water inlet filter may become clogged.

It is therefore a good idea to clean it from time to time.

Turn off the water tap. Unscrew the water inlet hose.

Clean the filter using a hard bristle brush.

Tighten up the inlet hose.

P1090

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 20

Something Not Working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an

engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.

IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or

installation, a charge will be made even if the appliance is under guarantee.

During machine operation it is possible that one of the following alarm codes appears on the display and the

(END) starts to flash:

E 10

E 2 0

E 40

: problem with the water supply

: problem with water draining

: door open

Once the problem has been eliminated, press the START PAUSE button to restart the programme. If after all checks, the

problem persists, contact your local Service Force Centre.

Symptom

Possible causes

●

E 40

)

The machine does not start

The door has not been closed. (

●

The plug is not properly inserted in the power socket.

There is no current at the socket

The main fuse or the fuse in the plug has blown.

The selector dial is not correctly positioned.

The START PAUSE button has not been depressed.

The DELAY START has been selected

●

E 10

The machine does not fill

Ensure the water tap is open. (

The filter in the inlet hose is blocked. (

The inlet hose may be squashed or kinked. (

)

E 10

)

E 10

)

E 40

The door has not been closed. (

)

●

The machine fills then empties

immediately

The end of the drain hose is too low.

The end of the drain hose is submerged in water.

There is no vent in the end of the drain hose.

●

E 2 0

The drain hose may be squashed or kinked. (

)

The machine does not empty and/or

does not spin

The RINSE HOLD option has been selected.

E 2 0

The drain filter may be blocked. (

)

The drain hose extension is not correct. Follow the instructions for

connecting to the waste.

●

The drainage system pipes are blocked.

The wash load is unbalanced: redistribute the clothes inside the drum to

allow the machine to spin.

●

There is water on the floor

Too much detergent or unsuitable detergent has been used (creates too

much foam).

Check whether there are any leaks from one of the inlet hose fittings. It

is not always easy to see this as the water runs down the hose; check to

see if it is damp.

●

The drain hose may be damaged or not securely positioned.

The detergent dispenser drawer or recess is clogged.

The drainage system pipes are blocked.

●

Too little detergent or unsuitable detergent has been used. An

insufficient amount of detergent leaves the laundry looking grey and

causes lime scale to form.

Unsatisfactory washing results

●

Stubborn stains have not been treated prior to washing

The correct wash programme has not been selected.

Too much laundry has been placed in the drum.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 21

Symptom

Possible causes

●

The machine vibrates when spinning

The internal packing has not been removed.

The machine is in contact with the wall or furniture.

The machine is not level.

The washing load is badly distributed in the drum.

●

Maybe there is very little laundry in the drum.

●

The door will not open

The water level is above the bottom edge of the door.

The machine is heating the water.

The drum is turning.

●

Spinning starts late or the machine

does not spin

The electronic unbalance detection device has cut in because the

laundry is not evenly distributed in the drum. The laundry is

redistributed by reverse rotation of the drum. This may happen several

times before the unbalance disappears and normal spinning can resume.

If, after 10 minutes, the laundry is still not evenly distributed in the

drum, the machine will not spin. In this case, redistribute the load

manually and select the spin programme.

●

The machine makes an unusual

noise

The machine is fitted with a type of motor which makes an unusual

noise compared with other traditional motors. This new motor ensures

a softer start and more even distribution of the laundry in the drum

when spinning, as well as increased stability of the machine.

●

No water is visible in the drum

Machines based on modern technology operate very economically

using very little water without affecting performance.

Before calling out an engineer, please ensure you have

read the details under the heading “Something Not

Service & Spare Parts

Working”.

In the event of your appliance requiring service, or if

you wish to purchase spare parts, please contact your

local Service Force Centre by telephoning:

When you contact the Service Force Centre you will

need to give the following details:

1. Your name, address and post code

2. Your telephone number

0870 5 929929

For the address of your local Service Force Centre and

further information about Service Force, please visit the

website at www.serviceforce.co.uk.

3. Clear and concise details of fault

4. The model and serial number of the appliance (found

on the rating plate - see picture)

For Customer Service in Ireland please contact us at the

address below:

5. The purchase date.

Zanussi

Electrolux Group (Irl) Ltd

Long Mile Road

Dublin 12

r o

. . . . . . . . . .

N o

. . . . . . . . . . .

e r

. . . . . . . . .

Republic of Ireland

Mod. ..........

Prod. No. ...........

Tel: +353 (0)1 4090751

Ser. No. .........

P0042 BD

Email: [email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 22

Customer Care Department

For general enquiries concerning your Zanussi appliance

or for further information on Zanussi products, please

contact our Customer Care Department by letter or

telephone at the address below or visit our website at

www.zanussi.co.uk

Tel 08705 727 727*

* calls to this number may be recorded for training

purposes.

Please note that a valid purchase receipt or

guarantee documentation is required for in-

guarantee service calls.

Customer Care Department - Zanussi

Major Appliances

Addington Way, Luton

Bedfordshire

LU4 9QQ

Guarantee Conditions

Standard guarantee conditions

●

Appliances found to be in use within a commercial

environment, plus those which are subject to rental

agreements.

Products of Zanussi manufacture which are NOT

marketed by Zanussi.

We, Zanussi, undertake that if, within 24 months of the

date of the purchase, this Zanussi appliance or any part

thereof is proved to be defective by reason only of

faulty workmanship or materials, we will, at our option,

repair or replace the same FREE OF ANY CHARGE

for labour, materials or carriage on condition that:

●

European guarantee

If you should move to another country within Europe

then your guarantee moves with you to your new home

subject to the following qualifications:

●

The appliance has been correctly installed and used

only on the electricity supply stated on the rating

plate.

●

The appliance has been used for normal domestic

●

The guarantee starts from the date you first

purchased your product.

The guarantee is for the same period and to the same

extent for labour and parts as exists in the new

country of use for this brand or range of products.

The guarantee relates to you and cannot be

transferred to another user.

Your new home is within the European Community

(EC) or European Free Trade Area.

The product is installed and used in accordance with

our instructions and is only used domestically, i.e. a

normal household.

The product is installed taking into account

regulations in your new country.

purposes only, and in accordance with the

manufacturer’s instructions.

●

The appliance has not been serviced, maintained,

repaired, taken apart or tampered with, by any

person not authorised by us.

All service work under this guarantee must be

undertaken by an Zanussi Service Force Centre.

Any appliance or defective part replaced shall become

the Company’s property.

This guarantee is in addition to your statutory and other

legal rights.

Home visits are made between 8.30am and 5.30pm

Monday to Friday. Visits may be available outside these

hours in which case a premium will be charged.

●

Before you move please contact your nearest Customer

Care Centre, listed below, to give them details of your

new home. They will then ensure that the local Service

Organisation is aware of your move and able to look

after you and your appliances.

Exclusions

This guarantee does not cover:

●

Damage or calls resulting from transportation,

France

Germany

Italy

Senlis

+33 (0) 344 62 29 29

+49 (0) 800 234 7378

+39 0434 39 4700

+46 (0) 8 672 53 90

08705 727 727

improper use or neglect, the replacement of any light

bulbs or removable parts of glass or plastic.

Nurnberg

Pordenone

Stockholm

Luton

●

Costs incurred for calls to put right an appliance

which is improperly installed or calls to appliances

outside the United Kingdom.

Sweden

Ireland

Dublin

+353 (0) 1 4090751

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 23

Installation Instructions

It is dangerous to alter the specifications or

attempt to modify this product in any way.

Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Any electrical work required to install this

appliance should be carried out by a qualified

electrician or competent person.

Any plumbing work required to install this

appliance should be carried out by a qualified

plumber or competent person.

Technical Specifications

DIMENSIONS

Height

Width

Depth

82 cm

60 cm

54 cm

POWER SUPPLY VOLTAGE

TOTAL POWER ABSORBED

230-240 V/50 Hz

2050 W (10A)

WATER PRESSURE

Minimum

Maximum

0.05 MPa

0.80 MPa

MAXIMUM RECOMMENDED LOAD

Cotton, linen

Synthetics

Delicate fabrics

Wool (Handwash

5.0 kg

2.5 kg

2.0 kg

)

SPIN SPEED

Maximum

1200 rpm

CONSUMPTION DATA FOR WASHING

5 KG of NORMALLY SOILED COTTON

ITEMS WITH THE ECONOMY

PROGRAMME 60°E

Energy

Water

Time

0.85 kWh

49 litres

145 mins

This appliance complies with the following E.E.C. Directives:

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 24

Set the machine upright and remove the two remaining

bolts from the back.

Unpacking

Pull out the three plastic spacers from the holes into

which the bolts were fitted.

Plug the open holes with the plugs supplied with the

instruction booklet.

All transit bolts and packing must be removed

before using the appliance.

You are advised to keep all the packaging for re-use in

case the machine is to be transported again.

Using a spanner unscrew and remove the rear right bolt.

Lay the machine gently on its back, making sure that the

hoses are not squashed.

P0020

P0256

Positioning

Install the machine on a flat hard floor.

P0255

Make sure that air circulation around the machine is not

impeded by carpets, rugs etc. Check that the machine

does not touch the wall or other kitchen units.

Never place cardboard, wood or similar materials under

the machine to compensate for any unevenness in the

floor.

Remove the polystyrene base and take off the bottom

panel by unscrewing the central screw. Carefully slide

out the right polythene bag.

Your new washing machine has been designed to be

permanently plumbed in to your home’s water supply

and drainage system. However, if this is not possible, it

may be connected to a suitable existing tap with the

drain hose discharging into a sink.

The appliance has an inlet hose, with female 3/4” BSP

thread connector. If this connection is not compatible

with the plumbing of the existing installation, a variety

of connectors are available from good hardware stores

and plumbers merchants to suit most domestic

plumbing. Any alteration to your existing plumbing

must be carried out by a competent person, or qualified

plumber.

P0457

P0015

Repeat the operation for the left and central polythene

bags.

Re-fit the bottom panel using the 4 screws supplied with

the door hinges (in the plastic bag) and the previously

removed screw.

Water inlet

Connect the hose to a tap with a 3/4’’ thread.

Do not use previously employed hoses.

Installation should comply with local water authority

and building regulations’ requirements.

P0453

P0016

The appliance must be connected to a cold water

supply.

A minimum water pressure of 0.05 MPa (0.5 bar) is

required for safe operation of the appliance.

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 25

If you cannot make the cold water connection direct

from the rising mains, you may be able to operate the

appliance from your cold water storage system.

When discharging into a standpipe ensure that the top of

the standpipe is no more than 90cm (35.4'') and no less

than 60cm (23.6'') above floor level.

3 pin

There should be a minimum distance of 5.02m

(16.5 ft) between the appliance’s inlet and the bottom of

the water storage tank.

Set the hoses correctly by loosening the ring nuts. After

positioning the inlet hoses, be sure to tighten the ring

nuts again to prevent leaks.

P1039

The drain hose may be extended to a maximum of 4

metres. An additional drain hose and joining piece is

available from your local Service Force Centre.

The joining piece must have an internal diameter of

18mm.

P1088

P0021

If your drain hose looks like this (see below) you do not

require the “U” piece”. Just push the hose firmly into

the standpipe.

Water drainage

This appliance is designed to be permanently plumbed

into your home's drainage system using one of the

following methods.

1. Into a drainage standpipe.

Firstly form a hook in the end of the drain hose using

the “U” piece” supplied.

P1212

2. Onto a sink outlet spigot.

If the outlet spigot has not been used before, remove

any blanking plug that may be in place.

“U” piece

supplied

P1199

Place the drain hose into your standpipe, which should

have an internal diameter of approximately 38mm thus

ensuring there is an air break between the drain hose

and standpipe.

P1197

38 mm (11.2”)

standpipe

diameter

P1074

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 26

Push the drain hose onto the spigot and secure with a

clip if required, ensure a loop is formed in the drain

hose (see diagram) to prevent waste from the sink

entering the washing machine.

Special conditions

If the floor is carpeted or covered with crumbly or soft

material, insert a rigid support base under the feet to

prevent noise, vibration or displacement. The base

should protrude a few centimetres beyond the edges of

the machine.

Warning

The machine should NOT be placed on deep pile

carpeting.

Loop

P1198

Note

The drain hose may be extended to a maximum of 4

metres. An additional drain hose and joining piece is

available from your local Service Force Centre.

Please ensure that when the appliance is installed it is

easily accessible for the engineer in the event of a

breakdown.

The joining piece must have an internal diameter of 18mm.

Important

In the interest of the environment

Before connecting up the machine to new pipework or

to pipework that has not been used for some time, run

off a reasonable amount of water to flush out any debris

that may have collected in the pipes.

Washing machines and dishwashers should be

connected to the FOUL drainage system, the water will

then be taken to a sewage works for treatment before

being discharged safely into a river.

It is essential that these appliances are not connected to

the surface water drainage system as this water is

discharged directly into a river or stream and may cause

pollution.

If you require any further advice please contact your

local water authority.

Levelling

Level the washing machine by raising or lowering the

feet. The feet may be tight to adjust as they incorporate

a self locking nut, but the machine MUST be level and

stable (check diagonally).

SHOWER

P1051

SINK TOILET

BATH

BIDET

Any necessary adjustment can be made with a spanner.

Accurate levelling prevents vibration, noise and

displacement of the machine during operation.

WASHING

MACHINE

DISHWASHER

RAINWATER

'RUN-OFF'

FOUL DRAIN

Some vibration is inevitable, especially if mounted on a

wooden floor.

SURFACE WATER

FOUL SEWERS

DRAINS & SEWERS

SEWAGE

TREATMENT

WORKS

UNTREATED

DISCHARGE

Sprung wooden floors are particularly susceptible to

vibration. For advice, consult a builder. If possible,

always place the machine on a solid floor.

TREATED

DISCHARGE

RIVER

P0987

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 27

The wire coloured green and yellow must be connected

to the terminal marked with the letter «E» or by the

Electrical connection

Any electrical work required to install this appliance

should be carried out by a qualified electrician or

competent person.

earth symbol

or coloured green and yellow.

The wire coloured blue must be connected to the

terminal «N» or coloured black.

WARNING: THIS APPLIANCE MUST BE

EARTHED.

The wire coloured brown must be connected to the

terminal marked «L» or coloured red.

Upon completion there must be no cut, or stray strands

of wire present and the cord clamp must be secure over

the outer sheath.

The manufacturer declines any liability should

this safety measure not be observed.

Before switching on, make sure the electricity supply

voltage is the same as that indicated on the appliance’s

rating plate. The rating plate is located at the top of the

rim of the open door.

WARNING:

A cut off plug inserted into a 13 amp socket is

a serious safety (shock) hazard.

Ensure that the cut off plug is disposed of

safely.

Should the appliance power supply cable neeed to be

replaced, this must be carried out by our Service

Force Centre.

r o

. . . . . . . . . .

. . . . . . . . . . .

S e

. . . . . .

Mod. ..........

Note

Prod. No. ...........

Ser. No. .........

P0042 BD

When the appliance is installed the power supply cable

must be accessible.

The appliance is supplied with a 13amp plug fitted.

In the event of having to change the fuse in the plug

supplied, a 13amp ASTA approved (BS1363/A) fuse

must be used.

Should the plug need to be replaced for any reason,

proceed as described below.

Permanent connection

In the case of permanent connection it is necessary that

you install a double pole switch between the appliance

and the electricity supply (mains), with a minimum gap

of 3mm between the switch contacts and of a type

suitable for the required load in compliance with the

current electrical regulations.

The wires in the mains lead are coloured in accordance

with the following code:

Green and Yellow

Blue

- Earth

- Neutral

- Live

The switch must not break the yellow and green earth

cable at any point.

Brown

GREEN & YELLOW

BROWN

BLUE

CORD CLAMP

P1041

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 28

The height (C-Fig. C) depends on the height of the

adjacent furniture's base.

Building-in

This appliance has been designed to be built into the

35 Ø 12.5-14 depth

kitchen furniture.

The recess should have the dimensions shown in picture

600

22+1,5

min.

596

570

515

595-598

P0422S

541

b) Hinges

490

P0965

To mount the hinges it is necessary to drill two holes

(dia. 35 mm, depth 12.5-14 mm depending on the depth

of door furniture) on the inner side of the door. The

distance between the holes hobs fixing centres must be

416 mm.

The distance (B) from upper edge of the door to the

centre of the hole depends on the adjacent furniture's

dimensions.

When installing the appliance into the kitchen furniture

ensure, if possible, the hoses are placed in either of the

two recesses on the back of the appliance. This will help

to prevent the hoses from becoming kinked or trapped.

Picture AB.

The required dimensions are given in the picture C.

The hinges will be fixed to the door by means of screws

for wood (2-Fig. B) supplied with the appliance.

c) Mounting the door

Fix the hinges (1) to the machine by means of the M5x8

screws (3-Fig. B). The hinges can be adjusted to

compensate for possible uneven thickness of the door.

To align the door perfectly it is necessary to loosen the

screw (3-Fig. B), adjust the door and tighten the screw

again.

Preparation and assembly of the door

The machine is originally pre-arranged for the assembly

of a door opening from right to left.

In this case it is sufficient to screw in the hinges (1) and

the counter-magnet (6) provided with the appliance, at

the right level (Fig. B).

d) Counter-magnet (6)

The appliance is pre-arranged for a magnetic closure of

the door. To enable a correct operation of this device, it

is necessary to screw the counter-magnet (6) (steel disk

+ rubber ring) into the inner side of the door.

Its position must correspond to the magnet (4) on the

appliance (see picture D).

P0982

a) Door

The dimensions of the door should be:

- width 595-598 mm

- thickness 16-22 mm

P0984

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 29

If the door has to be opened from left to right, invert the

position of the plates (7), the magnet (4) and the plate

(5) (Fig. B and E). Mount the countermagnet (6) and the

hinges (1) as previously described.

Position the base into the recess with its front edge as

far forward as the adjoining plinth line will allow.

The reason for placing the base in this position is to

allow a small strip of beading to be fitted in front of

the appliance feet.

Fix the base firmly to the floor using four appropriate

countersunk screws (see Fig. H).

P0983

Hardwood strip

5 X 25 X 605

5 mm x 25 mm

490

600-605

Recommendations regarding the

construction and fitting of a base

when the installation requires an

integrated appliance to be raised

With the appliance installed adjust all four feet ensuring

the machine is stable, and a clearance of approximately

5 mm is left between the top of the machine and the

underside of the worktop.

Where the appliance has been raised by mounting onto

a wooden base provided by the installer. The material

used to construct the base should have a non slip

surface, be water repellent and if possible be one solid

piece.

A final check for stability should be carried out with the

machine on spin with a load, this will identify the need

for any further fine adjustment to the feet.

A strip of beading approximately 605 mm W, x 5 mm

H, x 25 mm D must be screwed down into the base

directly in front of the machine’s feet, this will provide

additional security.

If it is not possible to use one solid piece, due to the

additional height required, ensure that any additional

strips of timber are glued and screwed to the underside

of the base (see Fig. F).

If required an additional door magnet, part number

1242394-00/3 and disc, part number 1242393-00/5 are

available from spare parts.

5 mm Hardwood strip

Additional pieces of

timber should run

40 mm

from front to back

100 mm

600-605 mm

Front view

Drill four fixing holes see Fig. G

600-605 mm

490 mm

95 mm

Front edge

50 mm

Top view

Download from Www.Somanuals.com. All Manuals Search And Download.

132985450.qxd 18/07/2005 17:47 Pagina 30

From the Electrolux Group. The world’s No. 1 choice.

The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.

More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum

cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150

countries around the world.

Download from Www.Somanuals.com. All Manuals Search And Download.

Weslo Home Gym WLEX08210 User Manual
Western Digital Computer Drive WD1600BJKT User Manual
Whirlpool Double Oven GGG390LX User Manual
Winegard TV Antenna HD7084P User Manual
Wolfgang Puck Mixer BIBC1010 User Manual
X10 Wireless Technology Stereo Receiver VR31A User Manual
Xerox All in One Printer 5101 User Manual
Zanussi Refrigerator ZC2450R User Manual
Zanussi Washer ZWP 581 User Manual
Zebra Technologies Barcode Reader ZM400 User Manual