DISHWASHER
ZT 6810
en
INSTRUCTION BOOKLET
152988 48/2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
It is most important that this instruction book should be retained with the appliance
for future reference. Should the appliance be sold or transferred to another owner, or
should you move house and leave the appliance, always ensure that the book is left with
the appliance in order that the new owner can get to know the functioning of the
appliance and the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it
carefully before installing or using the appliance.
■ When finishing loading or unloading close the
Installation
door, as an open door can be a hazard.
■ This appliance is heavy. Care should be taken when
■ Do not sit or stand on the open door.
moving it.
■ Isolate the appliance from the power supply and
■ It is dangerous to alter the specifications or attempt
turn off the water supply after use.
to modify this product in any way.
■ Care should be taken when cleaning the bottom
door seal and hinge area as any exposed metal
edges may cut if care is not taken.
■ Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
■ Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
■ This product should be serviced by an authorised
Service engineer, and only genuine spare parts
should be used.
■ Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
■ Under no circumstances should you attempt to
repair the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Force
Centre. Always insist on genuine spare parts.
Child Safety
■ This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
Conservation
In the interest of the environment:
■ Keep all packaging well away from children.
■ Materials marked with the symbol
are
■ Keep all detergents in a safe place out of children's
recyclable.
reach.
■ Check with your local Council or Environmental
Health Office to see if there are facilities in your
area for re-cycling this appliance.
During Use
■ Items that are contaminated by petrol, paint, steel
or iron debris, corrosive, acidic or alkaline
■ When the appliance is to be scrapped, cut off the
power supply cable and make the door closing
device unusable to prevent young children from
being trapped inside.
chemicals must not be washed in this dishwasher.
■ Help to keep your country tidy - use authorised
■ Under no circumstances should you open the door
whilst the appliance is in operation. Always turn off
the appliance before opening the door.
disposal sites for your old appliance.
■ Only use detergent specifically designed for use in
dishwashers.
■ Long blades knives stored in an upright position are
a potential hazard.
■ Long and/or sharp items of cutlery such as carving
knives must be positioned horizontally in the upper
basket.
PSI01UK
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
1
2
13
12
3
11
10
4
5
6
9
8
7
IN84
1
Levelling spacers
9. Rinse aid dispenser
10. Central filter
2. Upper basket stop
3. Upper spray arm
4. Salt container
5. Large filter
11. Lower spray arm
12. Upper basket
13. SID (Super Intensity Dispenser)
6. Detergent dispenser
7. Control panel
8. Rating plate
PDA07/1UK
4
Download from Www.Somanuals.com. All Manuals Search And Download.
The control panel
1
2 3 4 5 6 7 8 9 10
In this fully integrated appliance the controls are
located on the top of the door. When selecting a
programme, the door needs to be partially opened.
Press both "Programme selector" and "Economy dry"
buttons together for about 3 seconds (until you hear
an intermittent audible signal lasting about 3
seconds).
Audible signals have been introduced to help indicate
which operations the dishwasher is performing.
After this operation the audible signals are
deactivated.
Short signal - "Instruction accepted"
When any of the buttons are pressed, a short audible
signal informs you that the machine has accepted the
instruction given; if no signal is heard when a button
is pressed, this means that a programme is already
running or that the programme selected does not
include this function.
SO256
Long signal - "Programme run"
A continuous audible signal lasting about half second,
heard only when you close the dishwasher door,
informs you that the washing programme is starting.
To reactivate the audible signals
Press both buttons together again for about 3 seconds
until an intermittent audible signal informs you that
the audible signals are now reactivated.
Intermittent signal - "End of programme"
A short intermittent audible signal informs you that
the wash programme has ended.
1. On/Off pushbutton
Press this button to preset the dishwasher to accept
settings (selection of a wash programme, economy
drying, etc.).
Intermittent signal - "Alarm"
The machine is fitted with a number of alarm systems
to help you to determine the cause of any problems
(see "Something not working").
The number corresponding to the last programme
selected appears in the digital display; if salt or rinse
aid need refilling the corresponding indicator light
will illuminate.
An intermittent audible signal lasting about 15
seconds informs you that an alarm is activated.
When the washing programme has finished, the
machine stops automatically (a short intermittent
audible signal informs you of this) and three flashing
horizontal lines (---) will appear in the digital display
to indicate the end of the cycle.
To deactivate these audible signals (except the alarm
signal).
Both operations (to deactivate or reactivate the
audible signals) must be carried out before
selecting/starting a washing programme).
To switch off the dishwasher at the end of the
programme, press this button again.
PCP20UK
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Rinse aid refill indicator
light
8. "Economy drying"
pushbutton
This light illuminates when the rinse aid has run out,
and requires refilling.
By pressing this button you can opt to shorten (ECO
DRY) or completely omit the drying cycle (NO DRY).
The indicator light corresponding to the option
selected will illuminate.
3. Salt refill indicator light
With programme 1 (rinse and hold) and programme 10
(Plate warmer) this pushbutton is automatically
deactivated.
This light illuminates when the salt has run out, to
remind you to refill the salt container.
If both pilot lights are out, the full drying cycle will
be carried out (default setting).
4. "SID" indicator light
This light illuminates when you select a programme
with prewash.
9. "Delay start" pushbutton
Allows the start of the programme to be delayed by a
minimum of 1 hour, up to 12 hours.
5. Digital display
How to set the "Delay start":
Displays the programme number, the programme time
or the time delay.
- When the button is pressed, in the display appears
"h 00".
- Press the button again to select the number of hours
which you wish to delay the programme start, up to
a maximum of 12 hours.
6. "Programme selector"
button
The delay start will not affect the programme settings.
To select the required programme, press this button
until the number corresponding to the required
programme (e.g. P1 for Rinse and Hold) appears in the
digital display (see "Washing programmes" chart).
10. "Cancel" pushbutton
If you press this button for at least 3 seconds after the
start of a programme (with open door) the selected
programme will be cancelled. A short intermittent
audible signal will be heard, and (---) will appear in
the digital display for 2 seconds, indicating that the
wash programme has been cancelled.
7. "Half load" pushbutton
By pressing this button, washing can be concentrated
to a single basket instead of both; the indicator light
corresponding to the basket selected comes on.
In the digital display will appear the programme
previously selected with relative options.
This is very useful and economical when only a few
dishes need washing.
If this pushbutton is pressed for about 3 seconds
during the countdown of the delay start; the
countdown will be anulled but the other options are
still active and in the digital display will appear the
number of the programme selected.
Remember to load all the dishes into the basket
selected.
If both indicator lights are out, washing will be
carried out in both baskets (default setting).
At this point, the options can be changed and the
washing programme start or a new delay start can be
selected.
PCP21UK
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before use
Before using your dishwasher for the first time:
1. ensure that the electrical and water
connections comply with the installation
instructions
2. remove all packaging from inside the appliance
3. set the water softener
4. fill the salt container
5. fill the rinse aid dispenser
6. run a rinse and hold programme after installation
before carrying out a wash programme for the first
time.
Setting the water softener
The dishwasher is equipped with a water softener
designed to remove minerals and salts from the water
supply, which would have a detrimental or adverse
effect on the operation of the appliance.
Water hardness
French
The higher the content of these salts, the harder your
water is.
German
degrees
PPM
Level
(Parts per Million)
degrees
Water hardness is measured in equivalent scales,
German, French degrees and PPM (parts per Million).
0
1
2
3
4
5
6
7
8
9
0 - 4
5 - 8
9 - 11
12 - 17
18 - 22
23 - 28
29 - 33
34 - 39
40 - 45
46 - 67
0 - 8
9 - 14
0 - 80
81 - 140
The softener should be adjusted according to the
hardness of the water in your area. Your local Water
Authority can advise you on the hardness of the water in
your area.
15 - 20
21 - 30
31 - 40
41 - 50
51 - 60
61 - 70
71 - 80
141 - 200
201 - 300
301 - 400
401 - 500
501 - 600
601 - 700
701 - 800
The dishwasher is factory set at level 4.
If this level is not suitable for your area the softener
should be adjusted.
81 - 120 801 - 1200
To select a different level proceed as
follows:
- Press the On/Off pushbutton on.
- Press the "Half load" and "Economy drying" buttons
simultaneously for about 5 seconds. The indication
"L4" corresponding to the current level appears in
the display and the indicator of "ECO DRY" will
flash.
- Press the "Economy drying" button as many times as
necessary to make the required level appear in the
display. The level increases by 1 each time the button
is pressed.
- 5 seconds after this button has last been pressed, the
dishwasher memorises the level selected and returns
to the programme setting mode.
SO257
PBU07UK
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Filling with salt
If your water is "level 0" it is already soft and therefore
there is no need to use salt.
Salt must be used from "level 1" upward.
Only use salt specifically designed for
use in dishwashers.
All other types of salt not specifically
designed for use in dishwasher,
especially table salt, will damage the
water softener.
Only fill with salt just before starting one of the
complete washing programmes (not the Rinse and Hold
programme). This will prevent any grains of salt or salty
water, which may have been spilled, remaining on the
bottom of the machine for any period of time, which
may cause corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt
container.
2. Pour about 1 litre of water inside the container,
or until it is full (this is necessary only before
filling with salt for the first time).
T
SAL
3. Then using the funnel provided, pour in the salt
until the container is full (approx. 2 kg).
Do not worry if water over flows from the unit
when filling with salt, this is quite normal.
4. Replace the cap making sure that there is no
trace of salt on the screw thread or on the
gasket.
SR07
5. Screw on the cap tightly.
The salt container will require topping up periodically.
You are reminded of this by the "Salt refill indicator
light" on the control panel which comes on when the salt
has finished (if level 0 has been selected, the indicator
light will always be on).
The "Salt refill indicator light" on the
control panel can remain illuminated
for 2-6 hours after the salt has been
replenished, assuming the dishwasher
remains switched on. If you are using
salts that take longer to dissolve then
this can take longer. The function of
the machine is not affected.
PFS08UK
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid
Rinse aid is automatically added during the last rinse,
ensuring thorough rinsing, spot and streak free drying.
The dispenser, which is positioned inside the door, holds
about 110 ml of rinse aid, which is sufficient for 16 - 40
dishwashing programmes, depending upon the dosage
setting.
Filling with rinse aid:
1. Open the container by turning the lid (A)
anticlockwise.
A
2. Add the rinse aid until the container is
completely full (approx. 110 ml). The indicator
(B) will be completely dark.
BR01
3. Top up the rinse aid when the rinse aid indicator
light on the control panel illuminates.
Ensure that the lid is closed after every
refill.
B
5
4
Do not put liquid detergent in the rinse aid department.
Clean up any rinse aid spilt during filling with an
absorbent cloth to avoid excess foaming during the next
wash.
BR03
Adjusting the dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6 position
selector (C) (position 1 minimum dosage, position 6
maximum dosage). (Start from position 3). Gradually
increase the dose if there are drops of water or lime
spots on the dishes after washing. Reduce it if there are
sticky whitish streaks on the dishes.
C
5
BR02
PFR02UK
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Use of detergent
Only use detergents specifically
designed for use in dishwashers.
We recommend the use of Finish detergents which are
available in the following options:
Finish Double Action Tablets. Each tablet has the exact
amount of detergent required, simply place in the
dispenser.
Finish Powder recommended for every day use.
Finish Liquid Gel ideal for every day use. As the gel is
extra gentle is it recommended for fine bone china.
To fill the dishwasher with detergent
proceed as follows:
1. Open the dispenser lid by pulling the catch (D).
D
2. Add the detergent according to the
recommendations in the programme chart. As
all detergents are not the same, you should
also consult the instructions on the packet.
To help correctly dose the right amount of
detergent, inside the container there are two
reference marks:
M A X
M I N
DE07
- MIN
= 15 ml
= 30 ml
- MAX
3. Always close the lid.
4. If the programme has a prewash add the
required detergent in the "SID" located in the centre
of the upper basket.
Follow the recommended quantity of detergent
given in the "Washing programme" chart.
DE14
Insufficient quantities of detergent will produce poor
washing results, whereas an excessive amount of
detergent will not improve washing results and is also
wasteful.
Using no more than the correct amount also contributes
to reducing pollution.
PUD04UK
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact detergents with
enzymes
In these compact powders the environmently unfriendly
components have been replaced by natural enzymes and
other more biodegradable substances.
The enzymes deploy their full dirt dissolving power at a
temperature as low as 50°C.
By choosing the "Bio" programmes you can therefore
achieve the same cleaning results that would otherwise
be achievable only with 65°C programmes and
conventional detergents.
For best results we recommend the use of Finish detergents, rinse aid and salt.
POURING
PACK
W
NE
OUB
ION
T
C
E
L
A
D
L I Q U I D G E L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT
DE15
PUD03UK
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any scraps
of food, to avoid clogging the filters and consequently
reducing the performance.
Do not load very small items which
can fall through the baskets.
Open the door and slide out the baskets to load the
dishes.
The lower basket
The lower basket is designed to take saucepans, lids,
plates (up to 27 cm in diameter), salad bowls, cutlery
etc.
Serving dishes and large lids should be arranged around
the edge of the basket, ensuring that the upper spray arm
can turn freely.
UI48
The two rear rows of prongs on the lower basket can be
easily lowered to allow you to load pots, pans and
bowls.
To lower the prongs:
- Slightly pull them upward and let them drop down
(see picture)
- To bring them back to the standing position, just pull
them up again.
UI21
UI18
PBA10/1UK
12
Download from Www.Somanuals.com. All Manuals Search And Download.
The cutlery basket
Long bladed knives stored in an
upright position are a potential
hazard.
Long and/or sharp items of cutlery
such as carving knives must be
positioned horizontally in the upper
basket.
Take care when loading or unloading
sharp items such as knives.
Cutlery should be placed in the removable cutlery basket
with the handles facing downwards. If the handles
protrude from the bottom of the basket, obstructing the
lower spray arm, load the cutlery with the handles facing
upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
Silver cutlery tends to go black if mixed with steel
cutlery. Place it in the cutlery basket separate from the
others.
The cutlery basket is in two parts which can be
separated to give greater loading flexibility. To separate
the two parts, slide them horizontally in opposite
directions and pull them apart. To reassemble, reverse
the procedure.
UI62
PBA11/1UK
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The upper basket
The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 24 cm in diameter), salad
bowls, cups and glasses; Glasses with long stems can be
placed upside down in the raised cup racks.
Light items (plastic bowls etc.) should be loaded in the
upper basket and arranged so they do not move.
US58
Before closing the door, ensure that
the spray arms can rotate freely.
After loading or unloading your
machine always close the door, as an
open door can be a hazard.
US32
Adjusting the height of the
upper basket
If washing very large plates (over 27 cm and up to 31
cm in diameter) you can load them in the lower basket
after moving the upper basket to the higher position.
To move to the higher position proceed as
follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards until the
mechanism is engaged and the basket is stable.
When the top basket is in the higher position it
will only take plates up to 20 cm in diameter and
you will not be able to use the raised cup racks.
RC04
To lower the basket to the original
position:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and then allow the
mechanism to drop back down slowly, keeping hold
of it.
Never lift or lower the basket on one side
only.
PBA17/1UK
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints and tips
To save energy
Items not suitable for
dishwashers:
Place dishes in the machine immediately after every
meal and wait until the dishwasher is full before
washing.
The following items should not be
washed in the dishwasher (unless they
are sold as dishwasher proof):
If necessary run the Rinse and Hold programme (see
"Washing Programmes" chart on the following page),
so that any food scraps do not become caked on the
dishes while you are waiting to run the complete wash
programme.
- Cutlery with wooden or horn handles or
glued parts
- bronze cutlery
- saucepans with wooden handles
- aluminium ware
Do not prewash dishes under running water.
Select an economic programme when dishes are not
very soiled, following the instructions given in the
"Washing programmes" chart.
- crystal ware
- leaded glass
- plastic items
Select the "economy dry" or the "no dry" options.
- antique or fine decorated china
Certain types of decoration can discolour when
washed in a dishwasher.
Crystal-ware and plastic objects, if not guaranteed
dishwasher proof should be washed by hand.
For best washing results:
Before loading remove all scraps of food and soak
very heavily soiled pots and pans.
Certain types of glass can also become opaque
after being washed several times in a dishwasher.
Arrange saucepans, cups and glasses etc. upside-
down.
A chemical reaction can occur between silver cutlery
and stainless steel cutlery. As a precaution, do not
wash together.
Tilt items with convex or concave surfaces so that the
water drains off easily.
Iron and cast iron objects can rust and stain other
items.
Avoid contact between the dishes as far as possible.
Aluminium tends to go black, copper, pewter
and brass tend to stain.
You will improve drying results by leaving the
dishwasher door ajar for at least 15-30 minutes as
soon as the programme finishes.
If in doubt check with manufacturer
of the item.
Wait a few minutes before removing the dishes; in this
way they will be cooler and the drying will be
improved.
When buying new dishes, ensure
that they are dishwasher proof.
Empty the lower basket first and then the upper one;
this will avoid water dripping from the upper basket
onto the dishes in the lower one.
PHT02UK
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Recommended quantity
of detergent
Required
pushbuttons
Type of load
Cycle
description
Degree of soil
in the
SID
in the
dispenser
Any.
Partial load (to be
completed later in the day).
1
1 cold rinse
(to avoid food scraps from
sticking together).
PROGRAMMES
SELECTION
/
/
RINSE AND
HOLD
On
Off
Hot prewash
Main wash up to 70°C
4 cold rinses
1 hot rinse
2
Heavy soil.
Crockery, cutlery,
pots and pans
PROGRAMMES
SELECTION
INTENSIVE
70°C
25 g
25 g
10 g
5 g
On
Off
Turbo dry
Warm prewash
Main wash up to 65°C
4 cold rinses
1 hot rinse
Turbo dry
3
Heavy soil.
Crockery, cutlery,
pots and pans
PROGRAMMES
SELECTION
NORMAL PLUS
WITH PREWASH
65°C
On
Off
4
Cold prewash
Main wash up to 65°C
3 cold rinses
1 hot rinse
PROGRAMMES
SELECTION
NORMAL WITH
PREWASH
65°C
On
Off
Normal soil.
Crockery and cutlery
25 g
25 g
25 g
5 g
Turbo dry
Main wash up to 65°C
3 cold rinses
1 hot rinse
5
PROGRAMMES
SELECTION
Light soil.
Crockery and cutlery
/
On
Off
NORMAL NO
PREWASH 65°C
Turbo dry
Cold prewash
Main wash up to 50°C
3 cold rinses
1 hot rinse
6
PROGRAMMES
SELECTION
*
5 g
Normal soil.
Crockery and cutlery
On
Off
BIO WITH
PREWASH
50°C
Turbo dry
7
Main wash up to 50°C
3 cold rinses
1 hot rinse
PROGRAMMES
SELECTION
25 g
/
Light soil.
Crockery and cutlery
BIO NO
PREWASH
50°C
On
Off
Turbo dry
Main wash up to 55°C
1 cold rinse
1 hot rinse
8
**
PROGRAMMES
SELECTION
Light soil.
Crockery and cutlery
On
Off
QUICK
WASH 55°C
25 g
20 g
/
Turbo dry
Cold prewash
Main wash up to 45°C
2 cold rinses
1 hot rinse
9
Normal soil.
Delicate china
and glassware
PROGRAMMES
SELECTION
DELICATE
WITH PREWASH
45°C
5 g
On
Off
Turbo dry
This is a programme
designed both to heat
plates before serving or
remove dust from dishes
which have not been
used for a long time.
PROGRAMMES
SELECTION
10
PLATE
WARMER
1 hot rinse
Turbo dry
/
/
On
Off
Testing programme according to EN 50242
*
-
-
Programme 6 (BIO WITH PREWASH 50°C) with detergent type B.
Standard place settings: 12.
-
Rinse aid selector on position 6.
-
Recommended quantity of detergent: 25 g in the dispenser
5 g in the SID.
This is a special programme for quick washing a full load of lightly soiled crockery (except pots) so that you may re-use them
promptly.
**
PWP16/1UK
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating sequence
1. Check the filters
7. Close the detergent
dispenser lid
Ensure they are clean and properly positioned
(see cleaning instructions).
2. Press the On/Off
pushbutton
8. Set the programme
Press the programme selector button until the
number corresponding to the required
programme appears in the display.
In the digital display will appear the number of
the last programme selected
If a programme with prewash has been selected
the SID indicator light will come on.
The following options may also be selected:
3. Check that there is rinse
aid and salt
"Half load" by pressing the corresponding
button.
The indicator light of the selected basket will
come on.
Remember to load the dishes in the selected
basket.
The indicator lights will illuminate if refilling is
necessary.
"Economy drying / no drying" by pressing
the corresponding button. The indicator light of
the option selected will come on.
4. Load the dishes
Remove any scraps of food.
"Delay start".
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Pull the upper basket out and arrange the plates,
saucers, glasses and cups etc. in it.
9. Start the programme
Slide the basket back into the machine.
Close the dishwasher door. The programme
starts. An audible signal will inform you of this.
If a delay start has been selected, the
countdown starts when the door is closed.
The number of hours to go before the
programme starts will be indicated in the digital
display.
5. Ensure that the spray
arms can rotate freely
Once the delay set has elapsed, the programme
starts automatically.
6. Measure out detergent
Add the required amount of detergent into the
dispenser according to the "Washing
programmes" chart.
POS11UK
17
Download from Www.Somanuals.com. All Manuals Search And Download.
10. At the end of the
washing programme
The dishwasher will automatically stop, and an
intermittent audible signal informs you that the
programme has finished (if the delay start has
been selected this audible signal will be
automatically excluded).
In the digital display will appear 3 horizontal
lines (---).
Switch off the dishwasher by pressing the
On/Off pushbutton.
When the wash programme has
finished, it is recommended that the
dishwasher is unplugged and the
water tap turned off.
In general it is not advisable to open
the door while the machine is
working, especially during the hot
phase of the washing programme;
this could cause hot water to
escape.
However, the dishwasher has a
safety device that ensures, if the
door is opened that the machine
stops immediately.
Care must be taken if the door is
opened immediately after a
programme has finished, as steam
may escape.
POS12UK
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and cleaning
Internal cleaning
Ensure that the seals around the door, the detergent and
rinse aid dispensers are cleaned regularly with a damp
cloth.
We recommend the use of Finish Dishwasher Cleaner
every 3 months or run a 65°C wash without dishes using
detergent. Regular use of Finish Dishwasher Cleaner
cleans inaccessible parts, eliminates unpleasant food
odours and helps prevent the build-up of limescale.
Cleaning the central filter
(After each wash)
Scraps of food may accumulate in the drain filter (A)
and should be removed by rinsing the filter under
running water.
To remove the drain filter:
- simply pull it out by the handle.
A
Once cleaned, refit the filter by pushing it back to its
original position until it engages.
MA04
Cleaning the large filter
(Every month)
If necessary clean the large filter (B) on both sides under
running water, using a brush.
To remove the large filter
1.
2.
3.
Remove the spray arm by pulling it upwards on
one side.
Turn the column (C) anticlockwise by 90° and
then slide out the filter.
90°
Once cleaned refit it following the above
instructions in reverse order.
B
C
4.
Ensure the filter is in its original position, the
handle of the drain filter should be pointing
towards the front of the appliance.
MA05
The dishwasher must not be used
without filters.
Incorrect repositioning and fitting of
the filters will produce poor washing
results.
Cleaning the filters is vital to ensure
correct operation of the machine.
PMC04UK
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Check that the SID is not clogged with detergent
residue. If necessary, rinse it under running water after
having removed it from the basket by twisting it
anticlockwise and pulling it upwards.
Fasten it back onto the support by turning it clockwise.
Never use your dishwasher without
the SID dispenser.
Since SID also ensures correct
distribution of the water to the upper
spray arm, running the dishwasher
without it will impair the washing
result.
MA12
External cleaning
Clean the external surfaces of the machine and control
panel with a damp soft cloth. If necessary use only
neutral detergents. Never use abrasive products,
scouring pads or solvent (acetone, trichloroethylene
etc....).
Prolonged periods of non-
operation
If you are not using the machine for any
period of time you are advised to:
1. Unplug the appliance and then turn off the
water;
2. Fill the rinse aid dispenser;
3. Leave the door ajar to prevent the formation of
any unpleasant smells;
4. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the
temperature is below 0°C. If this is unavoidable, empty
the machine, close the appliance door, disconnect the
water inlet pipe and empty it.
Moving the machine
If you have to move the machine (moving
house etc....):
1. Unplug it;
2. Turn the water tap off;
3. Remove the water inlet and discharge hoses;
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transport.
PMC05UK
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling
out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
The dishwasher is fitted with a fault indication system, an alarm will sound and the following codes may be
displayed (A1, A2, A3, A4, A5, A6, A7, A8) which can help you to determine the cause of any problems.
The machine fails to start or stops during operation, all buttons are inoperative except for the On/Off button and a
fault code appears in the display.
- open the door, press the On/Off pushbutton to switch off the dishwasher and reset the alarm, carry out the
following suggested corrective actions.
Once made the corrective actions; select and start a wash programme, if the fault code reappears contact your local
Service Force Centre.
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or
installation a charge will be made even if the appliance is in guarantee.
Symptom
Fault code
Solution
The machine will not start
■ The On/Off button has not been pressed.
■ The door has not been properly closed,
■ The plug is not properly inserted in the power
socket.
■ Check the plug fuse.
■ There is no current at the socket.
The dishwasher does not
fill with water
Alarm A5
■ Ensure the water tap is open.
■ Ensure the mains water supply has not been cut off.
■ The inlet hose may be squashed or bent.
Reposition the hose.
■ The inlet hose may be blocked.
Switch off the water supply, and clean the filter.
The filters are blocked
■ Clean the filters (refer to “Maintenance and
cleaning”).
The dishwasher will not drain
Alarm A6
■ The drain hose may be squashed or bent.
Reposition the hose.
■ The sink may be blocked. Clear any blockages.
■ The drain hose extension is not correct. Follow the
instructions for connecting to the waste.
■ There is no vent in the end of the drain hose.
Alarms A1, A2, A3
A4, A7, A8
■ Switch off the dishwasher. Switch it back on and
start the programme. If the alarm reappears, call
the local Service Force Centre.
The machine is noisy
■ Dishes are rattling against each other, refer to
"Loading your machine".
■ The spray arms are knocking against the dishes.
Refer to "Loading your machine".
The door is difficult to close
■ The dishwasher is not level, or not properly built-in.
PSN13UK
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Solution
The dishes are not clean (poor wash)
■ The baskets are too full.
■ The dishes have not been arranged properly.
■ The spray arms do not rotate.
■ The spray arms are clogged.
■ The filters are clogged.
■ The filters are not in position.
■ Not enough detergent has been used or it is unsuitable.
■ The detergent is old or has gone hard.
■ The salt container cap is not properly closed.
■ The washing programme selected is too gentle.
Visible lime deposits or white film on
the dishes
■ Check that there is salt and that the salt cap is tight.
■ Ensure the water softener has been adjusted to suit the water
hardness in your area.
The dishes are not quite dry
■ The rinse aid has run out or too little is being used.
Protection against flooding
The machine is fitted with a device to protect against flooding
- the device will operate if there are any water leaks in the
machine, however it will only operate if the machine is on.
To repair the machine call the Service Force Centre.
PSN14UK
22
Download from Www.Somanuals.com. All Manuals Search And Download.
If after all these checks, the problem persists, contact
your local Service Force Centre, quoting the model and
serial number. This information can be found on the
rating plate located on the right hand side of the
dishwasher door (see picture).
Prod.No. ........ Ser. No. .........
Service and spare parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts please contact your
local Zanussi Service Force Centre by telephoning:
Mod. ........
RA01
08705 929929
Your telephone call will be automatically routed to the
Service Centre covering your post code area. Service
Centre addresses can be found in the accompanying
Customer Care book.
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working” and have the model number and purchase date
to hand.
In-guarantee customers should ensure that the
checks under the heading “Something Not Working”
have been made as the engineer will make a charge if
the fault is not a mechanical or electrical breakdown.
Please note that it will be necessary to provide proof
of purchase for any in-guarantee service calls.
Customer Care Department
For general enquiries concerning your Zanussi appliance
or for further information on Zanussi products please
contact our Customer Care Department by letter or
telephone as follows:
Customer Care Department
Zanussi
Zanussi House
Hambridge Road
Newbury
Berkshire
RG145EP
Tel: 01635 521313
PSN12UK
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee Conditions
Standard guarantee conditions
We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof
is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace
the same FREE OF CHARGE for labour, materials or carriage on condition that:
• The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s
instructions.
• The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not
authoried by us.
• All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.
• Any appliance or defective part replaced shall become the Company’s property.
• This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
Exclusions
This guarantee does not cover:
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or
removable parts of glass or plastic.
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the
United Kingdom.
• Appliances found to be in use within a commercial environment, plus those which are subject to rental
agreements.
• Products of Zanussi manufacture which are not marketed by Zanussi.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home
subject to the following qualifications:
• The guarantee starts from the date you first purchased your product.
• The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of
use for this brand or range of products.
• This guarantee relates to you and cannot be transferred to another user.
• Your new home is within European Community (EC) or European Free Trade Area.
• The product is installed and used in accordance with our instructions and is only used domestically, i.e. a
normal household.
• The product is installed taking in account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new
home. They will then ensure that the local Service Organisation is aware of your move and able to look after you
and your appliance.
France
Germany
Italy
Sweden
UK
Senlis
+33 (0) 44 62 29 99
Nurenberg +49 (0) 911 323 2600
Pordenone +39 (0) 1678 47053
Stockholm +46 (0) 8 738 79 50
Newbury +44 (0) 1635 521313
PSN15UK
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Any electrical work required to install
this appliance should be carried out
by a qualified electrician or
competent person.
Any plumbing work required to install
this appliance should be carried out
by a qualified plumber or competent
person.
Ensure the machine is easily accessible for
servicing when installed
Technical specifications
DIMENSIONS
Width
Height
Max depth
59.6 cm
81.8 - 87.8 cm
55 cm
Max depth with open door
111.4 cm
ELECTRICAL CONNECTION
MOTOR RATING DURING WASH
POWER OF HEATING ELEMENT
OVERALL POWER
Voltage
220/240 V - 50 Hz
200 W
2100 W
2300 W
WATER SUPPLY PRESSURE
Minimum
Maximum
50 kPa (0.5 bar)
800 kPa (8 bar)
CAPACITY (STANDARD IEC)
PLACE SETTINGS
12
CONSUMPTION (programme 6)
Water
17 l
Electricity
1.2 kW/h
PTS15/1UK
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove all packaging before positioning
the machine.
If possible, position the machine next to a water tap and
a drain.
Water supply connections
This dishwasher must be plumbed into a cold water
supply.
The water pressure must be within the limits given in the
technical specifications.
Your local Water Authority will advise you on the
average mains pressure in your area.
The dishwasher features fill and drain hoses which can
be turned either to the left or the right to suit the
installation.
The locknut must be correctly fitted to
avoid water leaks.
Avoid bends or kinks in the hose which could prevent or
slow down the water supply.
If the machine is connected to new pipes or pipes which
have not been used for a long time, you should run the
water for a few minutes before connecting the inlet hose.
This will prevent deposits of sand or rust clogging the
inlet hose filter.
PWA01UK
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Water outlet hose
connection
The end of the drain hose can be connected in the
following ways:
A- To the sink outlet siphon, securing it if necessary
with a clip.
B- To a wall outlet provided with a vent-hole, minimum
internal diameter 4 cm.
The waste connection must be at a height of between 30
cm (minimum) and 100 cm (maximum) from the floor.
It makes no difference which way the drain hose faces,
either to the right or left of the dishwasher.
A
C
B
Ensure the hose is not bent or squashed as this could
prevent or slow down the discharge of water.
C-If you use a drain hose extension it must be no longer
than 2 metres and its internal diameter must be no
smaller than the diameter of the hose provided.
+ 2 m max
CS11
Likewise the internal diameter of the couplings used for
connections to the waste outlet must be no smaller than
the diameter of the hose provided.
The sink plug must not be in place when
the machine is draining as this could cause
the water to siphon back into the machine.
PWA04UK
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
This appliance must be earthed.
The manufacturer declines any
responsibility should this safety measures
not be observed.
If the plug that is fitted to your appliance is not suitable
for the socket, it must be cut off and the appropriate plug
fitted.
Important
The wires on the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
-Earth
-Neutral
-Live
CE03
Brown
If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter
"E" or the earth symbol or coloured green and
yellow.
2. Connect the Blue (neutral) wire to the terminal in the
plug which is marked with the letter "N" or coloured
black.
3. Connect the Brown (live) wire to the terminal in the
plug which is marked with the letter "L" or coloured
red.
The plug moulded onto the lead incorporates a 13amp
BSI362 fuse. Only ASTA or BSI fuses should be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured insert
at the base of the product.
A replacement cover/carrier must be obtained from your
local Service Force Centre.
This appliance complies with the following
E.E.C. Directives:
- 73/23 or 19.2.73 (Low Voltage Directive)
and subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
PWA02UK
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in
This dishwasher is designed to be fitted under a kitchen
counter or worksurface.
It is essential that the recess dimensions indicated in the
diagram are followed.
No further openings for venting of the dishwasher are
required, but only to let the water fill and drain hose and
power supply cable pass through.
The recess height may be anywhere between 820 and
880 mm from the floor as the dishwasher incorporates
adjustable feet (max 60 mm).
A distance of 2 mm should be allowed between the top
of the dishwasher and the counter top.
596
600
550
max
Adjusting the height of the
appliance
-
To adjust the height proceed as follows:
+
II64
1. Loosen or tighten the two front feet.
2. The rear foot is adjusted by turning the screw in
the middle of the front kick plate to the left or
right.
A pad is supplied for the rear foot to make sliding the
appliance in and out of the recess easier.
To fit the pad, press it onto the rear foot.
If required, the dimensions of this pads can be reduced
by breaking it where marked.
II52
Good levelling is essential for correct closure and
sealing of the door. When the appliance is correctly
levelled, the door will not catch on the levelling spacers,
either side of the cabinet.
If the door does not close correctly, loosen or tighten the
adjustable feet until the machine is perfectly level.
IN11
IN12
PFI20UK
29
Download from Www.Somanuals.com. All Manuals Search And Download.
The furniture door
The door on this appliance is designed for the overlay of
a panel having the following dimensions:
596 max
Width:
Height:
596 mm
664 - 724 mm max
Thickness: 20 mm max
Weight: 2 - 7.5 kg max
525
=
=
The panel height should be no more than indicated,
otherwise complete opening of the door will no
longer be possible as the panel hits against the
dishwasher plinth.
II92
Mounting the furniture door
onto the door
The height of the panel depends on the height of
adjacent kitchen units (see kitchen plinth adjustment).
The panel must be fitted with a handle, as the
dishwasher handle will be hidden by the panel. Drill the
panel with a Ø 2 x 14 bit according to the dimensions
indicated in the figure.
II79
Screw the two fastening pivots in the holes indicated in
the figure.
Mount the decor panel by inserting the two fastening
pivots into the slotted holes of the door. Lift the decor
panel until perfect alignment with the fascia panel is
obtained.
Once the correct position has been found, open the door
and fasten the decor panel by means of the six 4 x 40
screws provided, using the holes through the inner door.
II80
Securing to the adjacent units
To prevent the dishwasher tilting, it must be secured to
either the worktop or adjacent kitchen cabinet/wall using
the brackets supplied.
Insert the two fixing brackets into the slots provided in
the top front part of the dishwasher as shown in the
figure.
Secure the brackets to the adjacent units with the 3.5 x
16 screws using the upper or the side holes.
The appliance must be secured to the
underside of the underside of the
worktop using the brackets provided.
Failure to do this could cause damage
or injury.
II54
PFI16/2UK
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise protection
Adhesive noise protection ensures excellent noise
insulation. This should be fitted when the dishwasher
has been mounted in the recess and the height adjusted.
Apply the protection as shown in the drawing, making
sure that the non-adhesive section reaches right down to
the floor.
II61
Kitchen plinth adjustment
To allow correct opening of the door it is sometimes
necessary to cut the kitchen plinth. Refer to the cutting
table.
According to dimensions (a) and (b) as shown on the
figure, you will find on the following table the depth (x)
of the cut to be made on the plinth.
II59
The dimensions (a) and (b) of the table are those most
frequently used in the kitchen furnitures.
a
b
II15
Height (a)*
170 160 150 140 130 120 110 100
136 131 125 118 110 100 93 85
135 131 125 118 110 102 92 85
137 132 125 118 110 102 94 85
138 134 128 120 110 104 95 85
90
75
75
75
75
78
80
85
40
50
60
70
X
80
/
/
/
139 130 124 115 105 98 88
90
/
/
138 129 120 110 100 90
100
/
135 125 115 105 95
600 mm
minimum
(*) dimensions in mm
X
Dimensions of the
cut on the plinth
PFI17UK
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|