DISHWASHER
DE 6544
UK
INSTRUCTION BOOK
152977 29/1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is left with the appliance in order that the new
owner can get to know the functioning of the appliance and the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before
installing or using the appliance.
G When finishing loading or unloading close the
Installation
door, as an open door can be a hazard.
G This appliance is heavy. Care should be taken
G Do not sit or stand on the open door.
when moving it.
G Isolate the appliance from the power supply and
G It is dangerous to alter the specifications or
turn off the water supply after use.
attempt to modify this product in any way.
G Care should be taken when cleaning the bottom
G Care must be taken to ensure that the appliance
door seal and hinge area as any exposed metal
does not stand on the electrical supply cable.
edges may cut if care is not taken.
G Any electrical work required to install this
G This product should be serviced by an authorised
appliance should be carried out by a qualified
Service engineer, and only genuine spare parts
electrician or competent person.
should be used.
G Any plumbing work required to install this
G Under no circumstances should you attempt to
appliance should be carried out by a qualified
repair the machine yourself. Repairs carried out
plumber or competent person.
by inexperienced persons may cause injury or
serious malfunctioning. Contact your local Service
Force Centre. Always insist on genuine spare
Child Safety
parts.
G This appliance is designed to be operated by
adults.
Conservation
Children should not be allowed to tamper with the
controls or play with the product.
In the interest of the environment:
G Keep all packaging well away from children.
G Materials marked with the symbol
are
G Keep all detergents in a safe place out of
recyclable.
children's reach.
G Check with your local Council or Environmental
Health Office to see if there are facilities in your
area for re-cycling this appliance.
During Use
G When the appliance is to be scrapped, cut off the
power supply cable and make the door closing
device unusable to prevent young children from
being trapped inside.
G Items that are contaminated by petrol, paint, steel
or iron debris, corrosive, acidic or alkaline
chemicals must not be washed in this dishwasher.
G Under no circumstances should you open the
door whilst the appliance is in operation. Always
turn off the appliance before opening the door.
G Help to keep your country tidy - use authorised
disposal sites for your old appliance.
G Only use detergent specifically designed for use in
dishwashers.
G Long bladed knives stored in an upright position
are a potential hazard.
G Long and/or sharp items of cutlery such as
carving knives must be positioned horizontally in
the upper basket.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
14
1
2
13
12
11
10
9
3
4
5
8
7
6
IN78
1. Levelling spacers
2. Upper basket stop
3. Salt container
4. Large filter
10. Lower spray arm
11. Upper spray arm
12. "SID" detergent dispenser
(Super Intensity Dispenser)
13. Upper basket
14. Worktop
5. Detergent dispenser
6. Control panel
7. Rating plate
8. Rinse aid dispenser
9. Central filter
4
Download from Www.Somanuals.com. All Manuals Search And Download.
The control panel
1. ON-OFF indicator light
2. ON-OFF push button
3. Door handle
5. Indicator lights
Phase indicator lights
Washing phase
illuminates when the washing phase is
running
Drying phase
illuminates when the drying phase is
running
End of programme
illuminates when the washing programme
has ended
4. Programme selection push
buttons
Salt and rinse aid indicator lights
SALT refilling indicator light
illuminates when the salt has run out and
the salt container requires refilling.
RINSE AID refilling indicator light
illuminates when the rinse aid has run
out and the rinse aid container requires
refilling.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before use
Before using your dishwasher for the
first time:
1. Ensure that the electrical and water connections
comply with the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and
then fill with salt
5. Fill the rinse aid dispenser
Setting the water softener
The dishwasher is equipped with a water softener
designed to remove minerals and salts from the
water supply, which would have a detrimental or
adverse effect on the operation of the appliance.
Water hardness
French
The higher the content of these salts, the harder
your water is.
PPM
(Parts per
Million)
Use of
salt
Clarke
Level
degrees
degrees
(°TH)
Water hardness is measured in equivalent scales,
Clarke degrees, French degrees and PPM (parts per
Million).
< 80
< 6
< 8
NO
1
2
3
4
5
81 - 300
301 - 500
501 - 700
701 - 900
6 - 21
8 - 30
YES
YES
YES
YES
22 - 35
36 - 49
50 - 63
31 - 50
51 - 70
71 - 90
The softener should be adjusted according to the
hardness of the water in your area. Your local Water
Authority can advise you on the hardness of the
water in your area.
The dishwasher is factory set at level 3.
If this level is not suitable for your area the softener
should be adjusted.
To select a different level be sure that
the dishwasher is off and then proceed
as follows:
1. Press INTENSIVE SID 80 and NORMAL
programme push buttons simultaneously.
2. While keeping the programme push buttons
INTENSIVE SID 80 and NORMAL pressed,
switch on the dishwasher by pressing the
ON-OFF push button.
SO363
The ON-OFF indicator light comes on.
At the same time, also the indicator light of the
INTENSIVE SID 80 comes on and remains fixed
for about 5 seconds, after this it starts flashing
indicating the current level of the water softener.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
The current level is indicated by the number of
flashes made by the INTENSIVE SID 80 indicator
light, that alternates 5 seconds off with a number of
flashes, this for about 60 seconds.
Example:
1 flash
= level 1
2 flashes = level 2
3 flashes = level 3
4 flashes = level 4
5 flashes = level 5
3. To change the level, press the INTENSIVE SID 80
programme push button. Each time the push
button is pressed the level changes.
Example:
if the current level is 3, by pressing the INTENSIVE
SID 80 programme push button once, level 4 is
selected.
The INTENSIVE SID 80 indicator light remains off
for about 5 seconds after which it starts flashing
indicating the new level selected.
4. To memorise the new level, switch off the
dishwasher by pressing the ON-OFF push button.
If your water is level 1 it is already soft
and therefore there is no need to use salt.
With the setting of the water softener at
level 1 the salt indicator light on the
control panel will always remain off.
Use salt from level 2 upwards.
From level 2 upwards, if salt refilling is
necessary, the salt indicator light will
illuminate only in setting mode and at the
end of the washing programme.
During the run of the programme it will
remain off.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Filling with salt
Only use salt specifically designed for use
in dishwashers.
All other types of salt not specifically
designed for use in a dishwasher,
especially table salt, will damage the water
softener.
Only fill with salt just before starting one
of the complete washing programmes.
This will prevent any grains of salt or salty
water, which may have been spilled,
remaining on the bottom of the machine
for any period of time, which may cause
corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt
container.
2. Pour 1 litre of water inside the container (this
is necessary only before filling with salt for
the first time).
SALET
SAL
SALZ
SEL
3. Using the funnel provided, pour in the salt until
the container is full.
Do not worry if water over flows from the unit
when filling with salt, this is quite normal.
4. Replace the cap making sure that there is no
trace of salt on the screw thread or on the gasket.
5. Screw on the cap tightly.
SR06
The salt container will require topping up
periodically.
You are reminded of this by the salt indicator light on
the control panel which comes on when the salt has
finished.
The salt indicator light on the control
panel can remain illuminated for 2-6 hours
after the salt has been replenished,
assuming the dishwasher remains
switched on. If you are using salts that
take longer to dissolve then this can take
longer. The function of the machine is not
affected.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid
Rinse aid is automatically added during the last
rinse, ensuring thorough rinsing, and spot and
streak free drying. The dispenser, which is
positioned inside the door, holds about 110 ml of
rinse aid, which is sufficient for 16 - 40 dishwashing
programmes, depending upon the dosage setting.
Filling with rinse aid
1. Open the container by turning the lid (A)
A
anticlockwise.
BR01
2. Add the rinse aid until the container is completely
full. The indicator (B) will be completely dark.
3. Top up the rinse aid when the rinse aid indicator
light on the control panel illuminates.
B
If rinse aid refilling is necessary, the rinse
aid indicator light will illuminate only in
setting mode and at the end of the
washing programme.
5
4
6
1
During the run of the programme it will
remain off.
BR03
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid
compartment. Clean up any rinse aid spilt during
filling with an absorbent cloth to avoid excess
foaming during the next wash.
Adjusting the dose
According to the finish and drying results obtained,
adjust the dose of rinse aid by means of the 6
position selector (C) (position 1 minimum dosage,
position 6 maximum dosage).
C
m
1
Increase the dose if there are drops of water or lime
spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the
dishes.
BR02
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any
scraps of food, to avoid clogging the filters and
consequently reducing the performance.
Do not load very small items which can fall
through the baskets.
UI48
Open the door and slide out the baskets to load the
dishes.
The lower basket
The lower basket is designed to take saucepans,
lids, plates, salad bowls, cutlery etc.
Serving dishes and large lids should be arranged
around the edge of the basket, ensuring that the
upper spray arm can turn freely.
UI21
The two rear rows of prongs on the lower basket can
be easily lowered to allow you to load pots, pans
and bowls.
To lower the prongs:
- Slightly pull them upward and let them drop down
(see picture).
- To bring them back to the standing position, just
pull them up again.
UI85
UI18
10
Download from Www.Somanuals.com. All Manuals Search And Download.
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard.
These items should only be placed in the
removable knife basket.
Take care when loading or unloading
sharp items such as knives.
Removable knife basket
Long and/or sharp items of cutlery such as carving
knives must be placed horizontally in the
removable knife basket provided, to be positioned
at the rear of the upper basket.
UI53
Cutlery should be placed in the removable cutlery
basket with the handles facing downwards. If the
handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery
with the handles facing upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
The cutlery basket is in two parts which can be
separated to give greater loading flexibility. To
separate the two parts, slide them horizontally in
opposite directions and pull them apart. To
reassemble, reverse the procedure.
UI62
For best results we recommend you to use the
cutlery grids provided (if the size and dimensions of
the cutlery allow it).
UI63
The upper basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates of up to 25 cm in
diameter), salad bowls, cups and glasses.
Arrange items on and underneath the cup racks so
that water can reach all surfaces.
Glasses with long stems can be placed upside down
in the raised cup racks.
Light items (plastic bowls etc.) should be loaded in
the upper basket and arranged so they do not move.
US47
Before closing the door, ensure that the
spray arms can rotate freely.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
In case that plates are loaded in the
upper basket:
load them starting from the rear positions of the
basket; tilting them slightly forwards and
avoiding the front positions near the door.
US71
Adjusting the height of the upper
basket
If washing very large plates (over 27 cm and up to 32
cm in diameter) you can load them in the lower basket
after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards until the
mechanism is engaged and the basket is stable.
RC04
When the top basket is in the higher
position it will only take plates up to 20 cm
in diameter and you will not be able to use
the raised cup racks.
To lower the basket to the original position
proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and the allow the
mechanism to drop back slowly, keeping hold of it.
Never lift or lower the basket on one side
only.
After loading your machine always close
the door, as an open door can be a hazard.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Use of detergent
Only use detergents specifically designed
for use in dishwashers.
We recommend the use of Finish detergents which
are available in the following options:
Finish Double Action Tablets. Each tablet has the
exact amount of detergent required, simply place in
the dispenser.
Finish Powder recommended for every day use.
Finish Liquid Gel ideal for every day use. As the
gel is extra gentle it is recommended for fine bone
china.
Min = 15 g
Max = 30 g
If using powder detergents proceed as follows:
D
1. Open the dispenser lid by pulling the catch (D).
2. Add the detergent according to the instructions
given in the Washing programmes chart.
X
I N
A
M
M
As all detergents are not the same, you should
also consult the instructions on the packet.
3. Always close the lid.
DE17
4. If the programme has a prewash add the
required detergent in the SID detergent
dispenser, located in the centre of the upper
basket.
If using detergent in tablets proceed as follows:
1. For all programmes; place 1 tablet inside the
detergent dispenser.
2. Always close the lid.
DE14
3. For all programmes with prewash; place a portion
of a further tablet on the lid of the detergent
dispenser.
Insufficient quantities of detergent will
produce poor washing results, whereas an
excessive amount of detergent will not
improve washing results and is also
wasteful.
Using no more than the correct amount
also contributes to reducing pollution.
Compact detergents with enzymes
In these compact powders the environmentally unfriendly components have been replaced by natural enzymes
and other more biodegradable substances.
The enzymes deploy their full dirt dissolving power at a temperature as low as 50°C.
By choosing the ECONOMY programmes you can therefore achieve the same cleaning results that would
otherwise be achievable only with 65°C programmes and conventional detergents.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints and tips
To save energy
Items not suitable for dishwashers
Place dishes in the machine immediately after every
meal and wait until the dishwasher is full before
washing.
The following items should not be washed in the
dishwasher (unless they are sold as dishwasher
proof):
Do not prewash dishes under running water.
- Cutlery with wooden or horn handles or
glued parts
Select the QUICK A 30 programme when dishes are
not very soiled, following the instructions given in the
"Washing programmes" chart.
- bronze cutlery
- saucepans with wooden handles
- aluminium ware
- crystal ware
- leaded glass
- plastic items
For best washing results
- antique or fine decorated china
Before loading, remove all scraps of food and soak
very heavily soiled pots and pans.
Certain types of decoration can discolour when
washed in a dishwasher.
Arrange saucepans, cups and glasses etc. upside-
down.
Crystal-ware and plastic objects, if not guaranteed
dishwasher proof should be washed by hand.
Tilt items with convex or concave surfaces so that
the water drains off easily.
Certain types of glass can also become opaque
after being washed several times in a dishwasher.
Avoid contact between the dishes as far as possible.
A chemical reaction can occur between silver cutlery
and stainless steel cutlery. As a precaution, do not
wash together.
Iron and cast iron objects can rust and stain other
items.
Aluminium tends to go black, copper, pewter and
brass tend to stain.
If in doubt check with manufacturer of the
item.
When buying new dishes, ensure that they
are dishwasher proof.
For best results we recommend the use of Finish detergents, rinse aid and salt.
P OURING
PACK
W
E
L
N
OUB
ION
T
C
E
A
D
L
I
Q
U
I
D
G
E
L
P
O
W
D
E
R
R
I
N
S
E
CONCENTRATED DISHWASHER DETERGENT
DE15
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes
Degree of soil
Type of load
Required
Recommended
Cycle
quantity of detergent
push buttons
description
wash
prewash
Hot prewash
Main wash up to 70°C
1 cold rinse
1 hot rinse
Active dry
*
ON-OFF
Heavy soil.
Crockery, cutlery,
pots and pans
70°
+
20 g
10 g
INTENSIVE SID 80
INTENSIVE SID 80
Cold prewash
Main wash up to 65°C
1 cold rinse
1 hot rinse
Active dry
ON-OFF
+
NORMAL
Normal soil.
Crockery and
cutlery
65°
NORMAL
25 g
5 g
ON-OFF
+
QUICK A 30
**
Fresh soil.
Crockery and
cutlery
Main wash up to 60°C
1 hot rinse
60°
30 g
25 g
/
QUICK A 30
Cold prewash
Main wash up to 50°C
1 cold rinse
1 hot rinse
Active dry
ON-OFF
+
ECONOMY
Normal soil.
Crockery and
cutlery
***
5 g
50°
ECONOMY
Ideal for washing a complete load of 12 place settings with normal soil.
Characterised by a duration of about 80 minutes and a washing temperature of 70°C.
*
The time value is approximate and depends on the pressure and the temperature of the water and also by the variations
of the power supply.
This is the daily programme for excellence.
Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil).
**
Characterised by a duration of about 30 minutes and a washing temperature of 60°C.
The time value is approximate and depends on the pressure and the temperature of the water and also by the variations
of the power supply.
This is a programme made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner
crockery and cutlery.
Testing programme for EN 50242 (see "Hints for Test Centres).
***
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating sequence
1. Check the filters
8. Setting and starting the
programme
Ensure they are clean and properly positioned
(see "Maintenance and cleaning").
Press the push button corresponding to the
required programme: the indicator light
corresponding to the programme illuminates
and the phase indicator lights for that
programme start flashing.
2. Press the ON-OFF push
button
The start of the programme will occur after
about 6 seconds from the last pressure of a
push button, in this time it is possible to
change the programme simply pressing the
push button of another programme.
The ON-OFF indicator light will come on.
3. Check that there is rinse aid
and salt
Once the programme has started the phase
indicator lights will turn off except for the
phase under way.
The corresponding indicator lights will
illuminate if refilling is necessary.
It is possible to interrupt the programme
by:
4. Load the dishes
G opening the door
Remove any scraps of food.
G pressing the ON-OFF (in this case all the
indicator lights turn off)
Pull the lower basket out and arrange the
saucepans, plates and cutlery in it.
Close the door again o press the ON-OFF, the
programme will start from the point in which it
was interrupted.
Pull the upper basket out and arrange the
plates, saucers, glasses and cups etc. in it.
Slide the baskets back into the machine.
9. To cancel a programme in
progress
5. Ensure that the spray arms
can rotate freely.
A programme in progress can be cancelled at
any time.
Press for about 3 seconds the push button of
the running programme until all indicator lights
are off.
6. Measure out detergent
Add the required amount of detergent into the
dispenser according to the recommended
quantity given in the Washing programmes
chart.
Only the ON-OFF indicator light will remain on
once the programme has been cancelled.
It is now possible to select a new washing
programme.
Close the detergent dispenser lid.
7. Close the dishwasher door
10. At the end of the washing
programme
The dishwasher will automatically stop and
the phase indicator light end of programme
will come on.
The indicator light of the programme just
ended will remain on.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
The dishwasher has finished the
programme only when the end of
programme indicator light is illuminated.
If you do not wait for the end of the
programme it will not be possible to start a
new programme if first you do not cancel
the previous.
(For instructions on how to cancel a
programme see point 9)
Switch off the dishwasher by pressing the ON-
OFF push button.
Wait 15/20 minutes before opening the
dishwasher’s door; in this way you will
avoid burning yourself when removing the
dishes and avoid also the damage of the
nearby furniture caused by the escape of
steam.
Empty the lower basket first and then the
upper one; this will avoid water dripping from
the upper basket onto the dishes in the lower
one.
Important!
In general it is not advisable to open the
door while the machine is working; if the
door is opened however, a safety device
ensures that the machine stops.
Care must be taken if the door is opened
during the hot phase or immediately after
a programme has finished, as steam may
escape.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the water
tap turned off.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and cleaning
Internal cleaning
Ensure that the seals around the door, the detergent
and rinse aid dispensers are cleaned regularly with
a damp cloth.
We recommend the use of Finish Dishwasher
Cleaner every 3 months or run a 65°C wash without
dishes using detergent. Regular use of Finish
Dishwasher Cleaner cleans inaccessible parts,
eliminates unpleasant food odours and helps
prevent the build-up of limescale.
Cleaning the central filter
(After each wash)
Scraps of food may accumulate in the drain filter (A)
and should be removed by rinsing the filter under
running water.
To remove the drain filter
- simply pull it out by the handle.
A
Once cleaned, refit the filter by pushing it back to its
original position until it engages.
MA04
MA19
Cleaning the large filter
(Every week)
If necessary clean the large filter (B) on both sides
under running water, using a brush.
90°
To remove the large filter
B
1. Remove the spray arm by pulling it upwards on
C
one side.
MA20
MA05
2. Turn the column (C) anticlockwise by 90° and
then slide out the filter.
3. Once cleaned refit it following the above
instructions in reverse order.
4. Ensure the filter is in its original position, the
handle of the drain filter should be pointing
towards the front of the appliance.
MA21
MA18
The dishwasher must not be used without
filters.
Incorrect repositioning and fitting of the
filters will produce poor washing results.
Cleaning the filters is vital to ensure
correct operation of the machine.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Check that the SID is not clogged with detergent
residue. If necessary rinse it under running water
after having removed it from the basket by twisting it
anticlockwise and pulling it upwards.
Fasten it back onto the support by turning it
clockwise.
Never use your dishwasher without the
SID dispenser.
Since SID also ensures correct distribution
of the water to the upper spray arm,
running the dishwasher without it will
impair the washing results.
MA12
External cleaning
Clean the external surfaces of the machine and
control panel with a damp soft cloth. If necessary
use only neutral detergents. Never use abrasive
products, scouring pads or solvent (acetone,
trichloroethylene etc....).
Prolonged periods of non-
operation
If you are not using the machine for any period
of time you are advised to:
1. Unplug the appliance and then turn off the water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of
any unpleasant smells.
4. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the
temperature is below 0°C. If this is unavoidable,
empty the machine, close the appliance door,
disconnect the water inlet pipe and empty it.
Moving the machine
If you have to move the machine (moving house
etc....):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out
an engineer.
The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any
problems.
The dishwasher will not start or stops during operation. All push buttons are inoperative except for the ON-OFF push
button. The indicator light of the programme under and one or more of the phase indicator lights (WASH, DRY, END
OF PROGRAMME) are flashing.
Press the ON-OFF push button to switch off the dishwasher and carry out the following suggested corrective actions
listed below.
Once the checks have been carried out switch on the dishwasher and start a washing programme, if the fault code
reappears in the digital display, contact your local Service Force Centre.
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or
installation a charge will be made, even if the appliance is in guarantee.
Symptom
Fault code
Solution
The machine will not start
G The door has not been properly closed.
G The plug is not properly inserted in the power socket.
G There is a power failure.
The machine does not fill
with water
Washing phase
indicator
G Ensure the water tap is open.
G Ensure the mains water supply has not been cut off.
G The inlet hose may be squashed or bent. Reposition the hose.
G The inlet hose may be blocked. Switch off the water supply and
clean the filter.
light flashing
The dishwasher will not drain
Drying phase
indicator light
flashes
G The drain hose may be squashed or bent. Reposition the hose.
G The sink may be blocked. Clear any blockages.
G The drain hose extension is not correct. Follow the instructions for
connecting to the waste.
G There is no vent in the end of the drain hose.
Protection against flooding
is active
Washing and drying
phase indicator lights
are flashing
G Close the water tap and contact the Service Force Centre.
General
One or more phase
indicator lights are
flashing
G Switch off the dishwasher. Switch it back on and start the
programme.
If the alarm reappears, call the local Service Force Centre.
The machine is noisy
G Dishes are rattling against each other, refer to “Loading your
machine”.
G The spray arms are knocking against the dishes. Refer to "Loading
your machine".
The door is difficult to close
G The dishwasher is not level, or not properly built-in.
Visible lime deposits or
white film on the dishes
G Check that there is salt and that the salt cap is tight.
G Check that the right level of the water softener is set.
The dishes are not quite dry
G The rinse aid has run out or too little is being used.
The dishes are not clean
(poor wash)
G The baskets are too full.
G The dishes have not been arranged properly.
G The spray arms do not rotate
G The spray arms are clogged.
G The filters are clogged.
G The filters are not in the correct position.
G Not enough detergent has been used or it is unsuitable.
G The detergent is old or has gone hard.
G The salt container cap is not properly closed.
G The washing programme selected is too gentle.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
If after all these checks, the problem persists,
contact your local Service Force Centre, quoting the
model and serial number.
This information can be found on the rating plate
located on the right hand side of the dishwasher
door (see picture).
Prod.No. ........ Ser. No. .........
Protection against flooding
Mod. ........
RA01
The machine is fitted with a device in the bottom of
the machine to protect against flooding.
The device will operate if there are any water leaks
in the machine, however it will only operate if the
machine is on.
In case of malfunction, the washing and drying
phase indicator lights start flashing.
To repair the dishwasher, turn off the water tap and
call the Service Force Centre.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Hints for test centres
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse
aid dispenser.
Test standard
EN 50242
Reference programme:
Load:
ECONOMY 50°
12 standard place settings
position 5
Rinse aid selector:
Detergent dosage :
30 g in the dispenser
Arrangement upper basket
Arrangement lower basket
Arrangement cutlery basket
Technical specifications
DIMENSIONS
Width
Height with worktop
60 cm
85 cm
Height without worktop
Max depth
Max depth with open door
82 cm
63,5 cm
115.2 cm
ELECTRICAL CONNECTION
MOTOR RATING DURING WASH
POWER OF HEATING ELEMENT
OVERALL POWER
Voltage
220/240 V - 50 Hz
200 W
2100 W
2300 W
WATER SUPPLY PRESSURE
Minimum
Maximum
50 kPa (0.5 bar)
800 kPa (8 bar)
CAPACITY
12 place settings
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Any electrical work required to install
this appliance should be carried out by a
qualified electrician or competent
person.
Any plumbing work required to install
this appliance should be carried out by a
qualified plumber or competent person.
Remove all packaging before positioning the
machine.
If possible, position the machine next to a water tap
and a drain.
Water supply connections
This dishwasher must be plumbed into a cold water
supply.
The water pressure must be within the limits given in
the technical specifications.
Your local Water Authority will advise you on the
average mains pressure in your area.
The dishwasher features fill and drain hoses which
can be turned either to the left or the right to suit the
installation.
Do not use, for the connection, old hoses which
have been used in another appliance.
The locknut must be correctly fitted to avoid
water leaks.
Avoid bends or kinks in the hose which could
prevent or slow down the water supply.
If the machine is connected to new pipes or pipes
which have not been used for a long time, you
should run the water for a few minutes before
connecting the inlet hose. This will prevent deposits
of sand or rust clogging the inlet hose filter.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Water outlet hose connection
The end of the drain hose can be connected in the
following ways:
1. To the sink outlet spigot, securing it if necessary
1
2
with a clip.
2. To a stand pipe provided with vent-hole, minimum
internal diameter 4 cm.
The waste connection must be at a height of between
30 cm (minimum) and 100 cm (maximum) from the
bottom of the dishwasher.
The drain hose can face either to the right or left of the
dishwasher
CS13
Ensure the hose is not bent or squashed as this could
prevent or slow down the discharge of water.
The sink plug must not be in place when the
machine is draining as this could cause the water
to siphon back into the machine.
If you use a drain hose extension it must be no longer
than 2 metres and its internal diameter must be no
smaller than the diameter of the hose provided.
Likewise the internal diameter of the couplings used
for connections to the waste outlet must be no smaller
than the diameter of the hose provided.
+ 2 m max
CS14
Attention!
Our appliances are supplied with a
security device to protect against the
return of dirty water back into the
machine.
If the spigot of your sink has a "no return
valve" incorporated this can prevent the
correct draining of your dishwasher.
We advise you therefore to remove it.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
This appliance must be earthed.
The manufacturer declines any
responsibility should this safety measure
not be observed.
If the plug that is fitted to your appliance is not
suitable for the socket, it must be cut off and the
appropriate plug fitted.
Important
The wires on the mains lead are coloured in
accordance with the following code:
Green
Blue
Brown
and
Yellow-Earth
-Neutral
-Live
If you fit your own plug, the colours of the wires in
the mains lead of your appliance may not
correspond with the markings identifying the
terminals in your plug.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the
letter "E" or the earth symbol
green and yellow.
or coloured
2. Connect the Blue (neutral) wire to the terminal in
the plug which is marked with the letter "N" or
coloured black.
3. Connect the Brown (live) wire to the terminal in
the plug which is marked with the letter "L" or
coloured red.
CE03
The plug moulded onto the lead incorporates a
13amp BSI362 fuse. Only ASTA or BSI fuses should
be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured
insert at the base of the product.
A replacement cover/carrier must be obtained from
your local Service Force Centre.
This appliance complies with the following E.E.C. Directives:
- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can install it
under a close fitting sink unit or a pre-existing top,
providing the dimensions of the recess correspond to
those shown in the picture.
Proceed as follows:
-
Remove the machine’s worktop by unscrewing the
two rear retaining screws, pull from the front and
slide out the rear slots, lifting the worktop.
600
IN05
Insert the machine after adjusting height and levelling
with the adjustable feet. When inserting the machine,
ensure that the water inlet and drain hoses are not
kinked or squashed.
Levelling
Good levelling is essential for correct closure and
sealing of the door.
When the appliance is correctly levelled, the door will
not catch on the levelling spacers on either side of the
cabinet.
If the door does not close correctly, loosen or tighten
the adjustable feet until the machine is perfectly level.
IN06
IN07
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and spare parts
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi
Service Centre by telephoning:
08705 929 929
Your telephone call will be automatically routed to the Service Force centre covering your post code area. The
addresses are listed on the following pages. Before calling out an engineer, please ensure you have read the details
under the heading "Something Not Working".
When you contact the Service Force Centre you will need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of the fault
4. The model and serial number (found on the rating plate)
5. The purchase date
Customer Care Department
For general enquiries concerning your Zanussi appliance or for further information on Zanussi products please contact
Customer Care Department
Zanussi
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: 08705 727727 (*)
calls to this number may be recorded for training purposes
*
Download from Www.Somanuals.com. All Manuals Search And Download.
To contact your local Service Force Centre telephone 08705 929 929
ISLE OF LEWIS
ND Macleod
16 James Street
Stornoway
CHANNEL ISLANDS
NORTH EAST
GUERNSEY
JERSEY
Guernsey Electricity
PO Box 4
Isle of Lewis PA87 2QW
GATESHEAD
GRIMSBY
HULL
Unit 356a
Dukesway Court
Dukesway
Gateshead NE11 0BH
Vale, Guernsey
Channel Islands GY1 3AD
KELSO
2, 6 & 8 Woodmarket
Kelso
Borders
Jersey Electricity Company
Haut De L’orme
Rue De Haut De L’orme
Trinity
TD5 7AX
15 Hainton Avenue
Grimsby
N. E. Lincs
DN32 9AS
Jersey
ORKNEY
PERTH
7 King Street
Kirkwall
Orkney
Channel Islands JE3 5FG
Unit 1
KW15 1JF
Boulevard Industrial Estate
Hull
SCOTLAND
Scottish Hydro Electric
HU3 4AY
Central Warehouse
Inveralmond
Perth PH1 3AF
ABERDEEN
54 Claremont Street
Aberdeen AB10 6RA
LEEDS
64-66 Cross Gates Road
Cross Gates
Leeds
(OWN SALES)
SHETLAND
AUCHTERMUCHTY 33a Burnside
Auchtermuchty
3-4 Carlton Place
Lerwick
Shetland
ZE1 0PW
LS15 7YS
Fife KY14 7AJ
NEWTON AYCLIFFE Unit 23
Northfield Way
(OWN SALES)
SHETLAND
BLANTYRE
Unit 5
Block 2
Auchenraith Ind. Estate
Rosendale Way
Blantyre G72 0NJ
Aycliffe Industrial Park
Newton Aycliffe
DL5 6EJ
Bolts Shetland
26 North Road
Lerwick
(OWN SALES)
WHALSAY
Shetland ZE1 0PE
SHEFFIELD
Pennine House
Roman Ridge Road
Sheffield
DUMFRIES
DUNOON
93 Irish Street
Dumfries
DG1 2 PQ
Leask Electrical
Harisdale
Symbister, Whalsay
Shetland ZE2 9AA
S9 1GB
(OWN SALES)
7 Hill Street
Dunoon
Argyll
NORTH WEST
PA23 7AL
BIRKENHEAD
CARLISLE
1 Kelvin Park
NORTHERN IRELAND
Dock Road
Birkenhead
CH41 1LT
EDINBURGH
Unit 12
BELFAST
Owenmore House
Kilwee Business Park
Dunmurry
Dumbryden Ind. Estate
2 Dumbryden Road
Edinburgh
Unit 7
Belfast
EH14 2AB
James Street Workshops
James Street
BT17 0HD
Carlisle
Cumbria
GLASGOW
Unit 4
Wellington Road
Bishopriggs
CA2 5AH
WALES
ISLE OF MAN
BOLTON
South Quay Ind. Estate
CARDIFF
CLYWD
DYFED
Unit 4
Glasgow G64 2SA
Douglas
Isle of Man
IM1 5AT
Guardian Industrial Estate
Clydesmuir Road
Cardiff
INVERNESS
Unit 3BI
Smithton Ind. Estate
Smithton
CF2 2QS
Unit B
Inverness IV2 7WL
Central Industrial Estate
St Marks Street
Bolton
Unit 6-7 Coed Parc
Abergele Road
Rhuddlan
Clwyd
ISLE OF ARRAN
ISLE OF BARRA
ISLES OF BUTE
R Haggerty
Bruach
Blackwaterfoot
Isle of Arran
BL3 6NR
LL18 5UG
PRESTON
Unit 250
Dawson Place
Bamber Bridge
Preston
Unit 9
J Zerfah
244 Bruernish
Isle of Barra
Western Islands HS9 5QY
St. Clears Business Park
Tenby Road
St. Clears
Carmarthen
SA33 4JW
Lancashire PR5 8AL
STOCKPORT
Unit 20 Haigh Park
Haigh Avenue
Stockport
Walker Engineering
Glenmhor
Upper Serpentine Road
Rothesay
Isle of Bute PA20 9EH
SK4 1QR
OSWESTRY
Plas Ffynnon Warehouse
Middleton Road
Oswestry
SY11 2PP
Download from Www.Somanuals.com. All Manuals Search And Download.
To contact your local Service Force Centre telephone 08705 929 929
MIDLANDS
LONDON & EAST ANGLIA
SOUTH EAST
BIRMINGHAM
66 Birch Road East
BECKENHAM
11a Gardner Ind. Estate
Wyrley Trading Estate
Witton
Birmingham
B6 7DB
Kent House Lane
Beckenham
Kent BR3 1QZ
ASHFORD
FLEET
Unit 2
Bridge Road Business Centre
Bridge Road
Ashford
CHELMSFORD
COLINDALE
Hanbury Road
Widford Ind. Estate
Chelmsford
Essex
Kent TN23 1BB
BOURNE
Pinfold Road
Bourne
PE10 9HT
Unit 1
Redfields Ind. Estate
Church Crookham
Fleet
CM12 3AE
BRIDGNORTH
68 St. Mary’s Street
Bridgnorth
Shropshire
Unit 14
Capitol Park
Capitol Way
Colindale
London NW9 0EQ
Hampshire GU13 0RD
WV16 4DR
HAYWARDS
HEATH
21-25 Bridge Road
Haywards Heath
Sussex RH16 1UA
GLOUCESTER
HEREFORD
101 Rycroft Street
Gloucester
GL1 4NB
ELTHAM
194 Court Road
Mottingham
Units 3 & 4
Eltham
TONBRIDGE
Unit 30
Bank Buildings
Cattle market
Hereford
London SE9 4EW
Deacon Trading Estate
Morley Road
Tonbridge
ENFIELD
284 Alma Road
Enfield
HE4 9HX
TN9 1RA
London
EN3 7BB
HIGHAM FERRERS 30 High Street
Higham Ferrers
Northants
NN10 8PL
GRAVESEND
Unit B4
Imperial Business Estate
West Mill
Gravesend
Kent
SOUTH WEST
BARNSTAPLE
Main Road
Fremington
Barnstaple
North Devon EX31 2NT
ILKESTON
Unit 2
Furnace Road
Ilkeston DE7 5EP
DA11 0DL
LEICESTER
Unit 7
IPSWICH
Unit 6C
Oaks Industrial Estate
Coventry Road
Narborough
Leicestershire
LE9 5GF
Elton Park Business Centre
Hadleigh Road
Ipswich
BOURNEMOUTH 63-65 Curzon Road
Bournemouth
Dorset
BH1 4PW
IP2 0DD
LETCHWORTH
LONDON
16-17 Woodside Ind. Park
BRIDGEWATER
BRISTOL
6 Herswell Business Park
Salmon Parade
Bridgwater
LINCOLN
Unit 8
Works Road
Letchworth
Herts
Clifton Street
Stone Field Park
Lincoln
Somerset TA6 5PY
SG6 1LA
LN5 8LQ
11 Eldon Way
2 - 4 Royal Lane
Yiewsley
West Drayton
Middlesex
Eldonwall Trading Estate
Bristol
BS4 3QQ
NEWCASTLE
UNDER LYME
18-21 Croft Road
Brampton Ind. Estate
Newcastle under Lyme
Staffordshire
ST5 0TW
UB7 8DL
EMSWORTH
ISLE OF WIGHT
266 Main Road
Southbourne
Emsworth
MAIDENHEAD
MOLESEY
Reform Road
Maidenhead
Berkshire
SL6 8BY
PO10 8JL
REDDITCH
TAMWORTH
13 Thornhill Road
North Moons Moat
Redditch
Worcestershire
B98 9ND
Unit 8
Enterprise Court
Ryde Business Park
Ryde
10 Island Farm Avenue
West Molesey
Surrey
Isle of Wight PO33 1DB
Unit 3
KT8 2UZ
Sterling Park
Claymore
Tamworth
B77 5DQ
NEWTON ABBOT Unit 2
Zealley Ind. Estate
NEWBURY
9 Pipers Court
Berkshire Drive
Thatcham
Berkshire
RG19 4ER
Kingsteignton
Newton Abbot
TQ12 3TD
WORCESTER
Units 1 & 2
Northbrooks Close
Gregorys Mill Ind. Estate
Worcester
REDRUTH
Unit 7D
Pool Ind. Estate
Druids Road
Redruth
Cornwall TR15 3RH
NORWICH
SUNBURY
2b Trafalgar Street
Norwich
NR1 3HN
WR3 8BP
Unit 1a
The Summit
Hanworth Road
Sunbury on Thames
TW16 5DB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee conditions
Standard guarantee conditions
We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to
be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF
CHARGE for labour, materials or carriage on condition that:
● The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
● The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s instructions.
● The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not authorised by us.
● All service work under this guarantee must be undertaken by a Zanussi Service Force Centre.
● Any appliance or defective part replaced shall become the Company’s property.
● This guarantee is in addition to your statutory and other legal rights.
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these hours in which
case a premium will be charged.
Exclusions
This guarantee does not cover:
● Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts
of glass or plastic.
● Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United
Kingdom.
● Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
● Products of Zanussi manufacture which are not marketed by Zanussi.
European Guarantee
If you should move to another country within Europe then your guarantee moves with you to your new home subject to the
following qualifications:
● The guarantee starts from the date you first purchased your product.
● The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this
brand or range of products.
● This guarantee relates to you and cannot be transferred to another user.
● Your new home is within the European Community (EC) or European free Trade Area.
● The product is installed and used in accordance with our instructions and is only used domestically, i.e. a normal household.
● The product is installed taking into account regulations in your new country.
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They
will then ensure that the local service Organisation is aware of your move and able to look after you and your appliances.
France
Germany
Italy
Senlis
+33 (0)3 44 62 28 28
+49 (0)911 323 2600
+39 (0)1678 47053
+46 (0)20 78 77 50
+44 (0)1753 219897
+353 (0) 14090753
Nurnberg
Pordenone
Stockholm
Slough
Sweden
UK
Ireland
Dublin
152979 72/0
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
From the Electrolux Group. The world’s No.1 choice.
The Electrolux Group is the world’s largest producer of powered appliances for kitchen,
cleaning and outdoor use. More than 55 million Electrolux Group products (such as
refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year
to a value of approx. 14 billion USD in more than 150 countries around the world.
©
Electrolux Household Appliances Limited 2001
Download from Www.Somanuals.com. All Manuals Search And Download.
|