User
information
Ceramic glass
hob
ZVH 66 F
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
1 Safety instructions
Please comply with these instructions. If you do
not, any damage resulting is not covered by the
warranty.
General safety
• The appliance may only be installed and
connected by trained, registered service en-
gineers.
• Built-in appliances may only be used after
they have built in to suitable built-in units and
work surfaces that meet standards.
• In the event of faults with the appliance or
damage to the glass ceramic (cracks,
scratches or splits), the appliance must be
switched off and disconnected from the elec-
trical supply, to prevent the possibility of an
electric shock.
Correct use
• This appliance is not intended for use by chil-
dren or other persons whose physical, sen-
sory or mental capabilities or lack of
experience and knowledge prevents them
from using the appliance safely without su-
pervision or instruction by a responsible per-
son to ensure that they can use the
appliance safely.
• Do not leave the appliance unattended dur-
ing operation.
• This appliance should be used only for nor-
mal domestic cooking and frying of food.
• The appliance must not be used as a work
surface or as a storage surface.
• Additions or modifications to the appliance
are not permitted.
• Do not place or store flammable liquids, high-
ly inflammable materials or fusible objects
(e.g. plastic film, plastic, aluminium) on or
near the appliance.
• Repairs to the appliance must only be carried
out by trained registered service engineers.
Safety during use
• Overheated fats and oils can ignite very
quickly. Warning! Fire hazard!
• There is the risk of burns from the appliance
if used carelessly.
• Remove stickers and film from the glass ce-
ramic.
• Cables from electrical appliances must not
touch the hot surface of the appliance or hot
cookware.
Children’s safety
• Small children must be kept away from the
appliance.
• Only let bigger children work on the appli-
ance under supervision.
• To avoid small children and pets unintention-
ally switching the appliance on, we recom-
mend activation of the child safety device.
• Switch the cooking zones off after each use.
Safety when cleaning
• For cleaning, the appliance must be switched
off and cooled down.
• For safety reasons, the cleaning of the appli-
ance with steam jet or high-pressure clean-
ing equipment is not permitted.
Download from Www.Somanuals.com. All Manuals Search And Download.
• Objects that melt and things that boil over
can burn onto the glass ceramic and should
be removed straightaway.
• To avoid damaging cookware and glass ce-
ramics, do not allow saucepans or frying
pans to boil dry.
How to avoid damage to the appli-
ance
• The glass ceramic can be damaged by ob-
jects falling onto it.
• The edge of the glass ceramic can be dam-
aged by being knocked by the cookware.
• Cookware made of cast iron, cast aluminium
or with damaged bottoms can scratch the
glass ceramic if pushed across the surface.
• Do not use the cooking zones with empty
cookware or without cookware.
Description of the Appliance
Cooking surface layout
Single cooking zone 1000 W
Double ring cooking zone 700/1700 W
Double ring cooking zone 600/1700 W
Control panel
Single cooking zone 1000 W
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel layout
Cooking zone indicators
Timer function
Heat setting selection
Lock
with pilot light
Display
Timer display
Double ring cooking zone switch
with pilot light
Double ring
cooking zone
switch with pilot
Timer
On/Off
with power indicator
Touch Control sensor fields
The appliance is operated using Touch Control
sensor fields. Functions are controlled by
touching sensor fields and confirmed by dis-
plays and acoustic signals.
Touch the sensor fields from above, without
covering other sensor fields.
Sensor field
On / Off
Function
To switch the appliance on and off
Increasing heat setting/time
Decreasing heat setting/time
Timer selection
Increase settings
Decrease settings
Timer
Lock
Locking/unlocking the control panel
Double ring switch
Switches outside ring
on and off
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays
Display
Description
Cooking zone is switched off
Keep warm setting is set
Keep warm setting
Heat settings
-
Heat setting is set
Automatic warm up function
Fault
Automatic warm-up function is activated
Malfunction has occurred
Cooking zone is still hot
Residual heat
Child safety device
Automatic switch off
Lock/child safety device is engaged
Switch off is active.
Residual heat indicator
1 Warning! Risk of burns from residual
heat. After being switched off, the cooking
zones need some time to cool down. Look
at the residual heat indicator
.
3 Residual heat can be used for melting and
keeping food warm.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the appliance
Switching the appliance on and
off
Control panel
Display
Pilot light
lights up
Switch on
Switch off
Touch
Touch
for 2 seconds
for 1 second
/
/ none
goes out
3 After switching on, within approx.
10 seconds a heat setting or a function
must be set, otherwise the appliance auto-
matically switches itself off.
Setting the heat setting
Control panel
Indicator
To increase
To decrease
To switch off
Touch
Touch
Touch
to
to
and
at the same time
3 The keep warm setting
lies between
and . It is used to keep food warm.
Switching the outside ring on
and off
By switching the outside rings on or off, the ef-
fective heating surface can be matched to the
size of the cookware.
3 Before an outside ring can be switched on,
the inside ring must be switched on.
Double ring cooking
Sensor field
Pilot light
zones
To switch on outside ring
To switch off outside ring
Touch
Touch
for 1-2 seconds
for 1-2 seconds
is lit
goes out
Download from Www.Somanuals.com. All Manuals Search And Download.
Locking/unlocking the control
panel
The control panel, with the exception of the
“On/Off” sensor field, can be locked at any time
in order to prevent the settings being changed
e.g. by wiping over the panel with a cloth.
Control panel
Display
(for 5 seconds)
previously set heat setting
Switch on
Switch off
Touch
Touch
3 When you switch the appliance off, the
locking function is automatically switched
off.
Download from Www.Somanuals.com. All Manuals Search And Download.
setting using , when starting from , the
cooking zone switches to full power for a cer-
tain amount of time and then automatically
switches back to the heat setting set.
Using the automatic warm-up
function
All cooking zones are equpped with an auto-
matic warm up function When setting a heat
Control
panel
possible heat Display
settings
Switch on
Touch
to
(after 5 seconds)
(only when starting at
)
Switch off
Not used
Touch
Touch
to
to
/
to
to
3 If during the automatic warm up a high-
er heat setting is selected, e.g. from
, the automatic warm up is adjusted.
to
3 If there is still residual heat on the cooking
zone (display ), the automatic warm up
is not performed.
3 If the power of a cooking zone is reduced
by the Power Management, the automatic
warm up for this cooking zone is ended.
The length of time that the automatic warm up
function operates depends on the heat setting
selected.
Heat setting
Length of the automatic warm up [min:sec]
v
1
2
3
4
5
6
7
8
9
0:30
1:00
1:40
4:50
6:30
10:10
2:00
3:30
4:30
---
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the child safety device
The child safety device prevents unintentional
use of the appliance.
Switching on the child safety device
Step
Control panel
Display/Signal
1.
2.
Switch on appliance. (Do not set
a heat setting.)
Touch
for 4 seconds
The child safety device is switched on.
Switching off the child safety device
Step
Control panel
Display/Signal
1.
Switch on appliance. (Do not set
a heat setting.)
2.
3.
Touch
for 4 seconds
lights up
Switch appliance off.
The child safety device is switched off.
Overriding the child safety device
The child safety device can be switched off in
this way for a single cooking session; it remains
activated afterwards.
Step
Control panel
Switch appliance on
Touch for 4 seconds
Display/Signal
1.
2.
lights up
Until the appliance is next switched off, it can used as normal. After switching off the appliance,
the child safety device is active again.
3 After overriding the child safety device, a
heat setting or a function must be set with-
in approx. 10 seconds, otherwise the ap-
pliance automatically switches itself off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Management
The appliance has a maximum power output. If
this maximum power is exceeded, the Power
Management automatically reduces the power
of the last cooking zone to be switched on.
This can happen by:
• switching on another cooking zone
• switching on an outer ring, when other cook-
ing zones are already switched on at high
settings
• increasing the heat setting on a cooking
zone, when other cooking zones are already
switched on at high settings
The display for the last cooking zone to be
switched on alternates for 1 minute between
the heat setting set and the maximum possible
heat setting. During this period it is not possible
to increase the heat setting. Thereafter the ac-
tual heat setting is displayed.
Example: heat setting 9 is selected on a cook-
ing zone. Heat setting 9 is also set for another
cooking zone. If this exceeds the maximum out-
put, the Power Management reduces the power
of the last cooking zone to be switched from 9
to 7, for example, and the display for this cook-
ing zone alternates between 9 and 7 and then
remains on the current maximum of 7. (Wheth-
er the display alternates between 9 and 7 or 9
and 6 or other values, depends on the appli-
ance type and the size of the cooking zone.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timer
Function
Condition
Outcome after the
time has elapsed
Automatic cut-out
Countdown timer
a heat setting is set
acoustic signal
00flashes
Cooking zone switches off
cooking zones not in use
acoustic signal
00flashes
3 If a heat setting is set on this cooking zone
in addition to a countdown timer, the cook-
ing zone is switched off after the time set
has elapsed.
3 If a cooking zone is switched off, the timer
function set is also switched off.
Selecting a cooking zone
Step
Control panel
Display
1.
2.
3.
4.
Touch
Touch
Touch
Touch
once
Pilot light of the first cooking zone
flashes
once
once
once
Pilot light of the second cooking
zone flashes
Pilot light of the third cooking zone
flashes
Pilot light of the fourth cooking zone
flashes
3 If the pilot light is flashing more slowly, the
heat setting can be set or modified.
3 If other timer functions are set, after a few
seconds the shortest remaining time of all
the timer functions is displayed and the
corresponding pilot light flashes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the time
Step
1.
Control panel
Indicator
Select
Touch
cooking zone
or
Pilot light for the cooking zone selected flashes
00to 99 minutes
2.
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
Step
1.
Control panel
Indicator
Select
cooking zone
Pilot light of cooking zone selected flashes faster
Time remaining is displayed
2.
Touch
The time remaining counts backwards to 00.
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Changing the time
Step
1.
Control panel
Indicator
Select
cooking zone
Pilot light of the selected cooking zone flashes fast-
er
Time remaining is displayed
2.
Touch
or
01to 99 minutes
After a few seconds, the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a
cooking zone
Step
1.
Control panel field
Display
Select cooking zone
Pilot light of the cooking zone selected flashes fast-
er
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching off the acoustic signal
Step
1.
Control panel field
Acoustic signal
Touch
Acoustic signal to acknowledge.
Acoustic signal stops.
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a
heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking sur-
face automatically switches itself off.
• If one or more sensor fields are covered by
objects (a pan, cloths, etc.) for longer than
approx. 10 seconds, a signal sounds and the
cooking surface switches off automatically.
• If all cooking zones are switched off, the
cooking surface automatically switches itself
off after approx. 10 seconds.
Cooking zones
• If one of the cooking zones is not switched off
after a certain time, or if the heat setting is
not modified, the relevant cooking zone
switches off automatically. is displayed.
Before being used again, the cooking zone
must be set to .
Heat setting
Switches off after
v, 1- 2
3- 4
5
6 hours
5 hours
4 hours
6- 9
1.5 hours
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips on Cooking and Frying
3 Information on acrylamides
According to the latest scientific knowl-
edge, intensive browning of food, especial-
ly in products containing starch, can
constitute a health risk due to acrylamides.
Therefore we recommend cooking at the
lowest possible temperatures and not
browning foods too much.
Cookware
• You can recognise good cookware from the
bottoms of the pans. The bottom should be
as thick and flat as possible.
• Cookware made of enamelled steel or with
aluminium or copper bottoms can leave dis-
colorations on the glass ceramic surface
which are difficult or impossible to remove.
Energy saving
2 Switch cooking zones off before the end of
the cooking time, to take advantage of re-
sidual heat.
2 Always place cookware on the cooking
zone before it is switched on.
2 Bottom of pans and cooking zones should
2 If possible, always place lids on the pans.
be the same size.
Download from Www.Somanuals.com. All Manuals Search And Download.
Examples of cooking applica-
tions
The information given in the following table is
for guidance only.
Heat
setting
Cooking-
process
suitable for
Cooking time
Tips/Hints
0
Residual heat, Off position
Keeping cooked foods warm
Keeping
food warm
V
as required
Cover
Hollandaise sauce,
melting butter, chocolate, gelatine
Melting
5-25 mins.
Stir occasionally
Cook with lid on
1-2
Solidifying
Fluffy omelettes, baked eggs
10-40 mins.
Simmer-
ing on low
heat
Simmering rice and milk-based
dishes
Heating up ready-cooked meals
Add at least twice as much liq-
uid as rice, stir milk dishes part
way through cooking
2-3
3-4
25-50 mins.
20-45 mins.
20-60 mins.
Steaming
Braising
Steaming vegetables, fish
braising meat
With vegetables add only a lit-
tle liquid (a few tablespoons)
Use only a little liquid, e. g.:
max. ¼ l water for
750 g potatoes
Steaming potatoes
4-5
Boiling
Cooking larger quantities of food,
stews and soups
60-150 mins. Up to 3 l liquid plus ingredients
Steady frying Turn halfway through cooking
Frying escalopes, veal cordon
bleu, cutlets, rissoles, sausages,
liver, roux, eggs, pancakes,
doughnuts
Gentle
Frying
6-7
7-8
9
Hash browns, loin steaks, steaks,
Flädle (pancakes for garnishing
soup)
Heavy
Frying
5-15 mins.
Turn halfway through cooking
per pan
Boiling
Searing
Deep
Boiling large quantities of water, cooking pasta, searing meat (goulash, pot roast),
deep frying chips
frying
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
Cleaning the appliance after each
use
1.Wipe the appliance with a damp cloth and a
little washing up liquid.
1 Take care! Risk of burns from residual
heat.
1 Warning! Sharp objects and abrasive
cleaning materials will damage the appli-
ance. Clean with water and washing up liq-
uid.
2.Rub the appliance dry using a clean cloth.
1 Warning! Residues from cleaning
agents will damage the appliance. Re-
move residues with water and washing up
liquid.
Removing deposits
1.Place a scraper on the glass ceramic surface
at an angle.
2.Remove residues by sliding the blade over
the surface.
3.Wipe the appliance with a damp cloth and a
little washing up liquid.
4.Rub the appliance dry using a clean cloth.
Remove
immedi- when the appliance has
Type of dirt
using
ately
cooled down
sugar, food containing sugar
plastics, tin foil
yes
yes
---
---
a scraper*
---
limescale and water rings
fat splashes
yes
cleaner for glass ceramic
---
yes
or stainless steel*
shiny metallic discolouration
---
yes
*Scrapers and cleaners for glass ceramic and stainless
steel can be purchased in specialized shops
3 Remove stubborn residues with a cleaner
for glass ceramic or stainless steel.
3 Scratches or dark stains on the glass ce-
ramic that cannot be removed do not how-
ever affect the functioning of the appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do if …
Problem
Possible cause
Remedy
The cooking zones will not switch on More than 10 seconds have passed Switch the appliance on again.
or are not functioning
since the appliance was switched on
The child safety device is switched Deactivate the child safety device
on
(See the section “Child safety de-
vice”)
Several sensor fields were touched Only touch one sensor field
at the same time
Automatic switch off has been trig- Remove any objects (pan, cloths,
gered
etc.) that are lying on the control
panel. Switch the appliance on
again
The lock is switched on
Switch off the lock (See the section
“Locking/unlocking the control pan-
el”)
Acoustic signal sounds when appli- The control panel is wholly or partly Remove objects.
ance is switched off
covered by objects.
The residual heat indicator is not
displaying anything
The cooking zone was only on for a If the cooking zone is supposed to
short time and is therefore not hot
be hot, call the Customer Service
Department.
The automatic warm up function is There is still residual heat on the
Let the cooking zone cool down
not switching itself on
cooking zone
The highest heat setting is set
The highest heat setting has the
same power as the automatic warm
up function
The heat setting was set using the 1. Switching off the cooking zone
sensor field
1. Set the cooking zone using the
sensor field
Acoustic signal sounds and appli-
ance switches itself on and then off covered up, e.g. by a cloth
The On/Off sensor field has been
Do not place any objects on the con-
trol panel
again; after 5 seconds another
acoustic signal sounds
is lit
Overheating protection for the cook- Switch off the cooking zone. Switch
ing zone has been triggered the cooking zone on again
Automatic switch off has been trig- Switch off the cooking zone. Switch
gered the cooking zone on again
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible cause
Electronics fault
Remedy
and number are displayed
Disconnect the appliance from the
electrical supply for a few minutes
(Take the fuse out of the house’s
wiring system)
If after switching on again,
played again, call the customer
service department
is dis-
If you are unable to remedy the
problem by following the above
suggestions, please contact your
local Service Force Centre.
3 If the appliance has been operated incor-
rectly, the engineer's visit will be chargea-
ble, even during the warranty period.
1 Warning! Repairs to the appliance are
only to be carried out by qualified service
engineers. Considerable danger to the
user may result from improper repairs.
Disposal
2 Packaging material
2 Old appliance
The packaging materials are environmen-
tally friendly and can be recycled. The
plastic components are identified by mark-
ings, e.g. >PE<, >PS<, etc. Please dis-
pose of the packaging materials in the
appropriate container at the community
waste disposal facilities.
The symbol
W
on the product or on its
packaging indicates that this product may
not be treated as household waste. In-
stead it shall be handed over to the appli-
cable collection point for the recycling of
electrical and electronic equipment. By en-
suring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and hu-
man health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please con-
tact your local city office, your household
waste disposal service or the shop where
you purchased the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Instructions
1 Safety instructions
z Risk of injury from electrical cur-
rent.
Warning! This must be read!
• Loose and inappropriate plug and socket
connections can make the terminal overheat.
• Have the clamping connections correctly in-
stalled by a qualified electrician.
The laws, ordinances, directives and standards
in force in the country of use are to be followed
(safety regulations, proper recycling in accord-
ance with the regulations, etc.)
Installation may only be carried out by a quali-
fied electrician.
The minimum distances to other appliances
and units are to be observed.
Anti-shock protection must be provided by the
installation, for example drawers may only be
installed with a protective floor directly under-
neath the appliance.
The cut surfaces of the worktop are to be pro-
tected against moisture using a suitable seal-
ant.
The sealant seals the appliance to the work top
with no gap.
Avoid installing the appliance next to doors and
under windows. Otherwise hot cookware may
be knocked off the rings when doors and win-
dows are opened.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase
connection, the appropriate mains cable of
type H05BB-F Tmax 90°C(or higher) or an
equivalent type must be used.
• If this appliance’s mains cable is damaged, it
must be replaced by a special cable (type
H05BB-F Tmax 90°C; or higher) or an equiv-
alent type. The latter is available from the
Customer Care Department.
A device must be provided in the electrical in-
stallation which allows the appliance to be dis-
connected from the mains at all poles with a
contact opening width of at least 3 mm.
Suitable isolation devices include line protect-
ing cut-outs, fuses (screw type fuses are to be
removed from the holder), earth leakage trips
and contactors.
z Risk of injury from electrical cur-
rent.
• The electrical mains terminal is live.
• Make electrical mains terminal free of volt-
age.
• Follow connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection by installing
correctly.
Sticking on the seal
• Clean the worktop around the cut-out area.
• Stick the single-sided adhesive sealing tape
provided on the underside of the hob around
the outside edge ensuring that it is not
stretched. The two ends of the tape should
join in the middle of one side. After trimming
the tape (allow it to overlap by 2-3 mm),
press the two ends together.
• The appliance must be connected to the
electrical supply by a qualified electrician.
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rating Plate
ZVH 66 F
55HAD64AO
949 593 078
2,4 kW
230 V
50 Hz
ZANUSSI
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
In the event of technical faults, please first
check whether you can remedy the problem
yourself with the help of the operating instruc-
tions (section “What to do if…”).
If you were not able to remedy the problem
yourself, please contact the Customer Care
Department or one of our service partners.
In order to be able to assist you quickly, we re-
quire the following information:
– Model description
– Product number (PNC)
– Serial number (S No.)
(for numbers see rating plate)
– Type of fault
– Any error messages displayed by the appli-
ance
– three digit letter-number combination for
glass ceramic
So that you have the necessary reference num-
bers from your appliance at hand, we recom-
mend that you write them in here:
Model description:
PNC:
.....................................
.....................................
.....................................
S No:
Download from Www.Somanuals.com. All Manuals Search And Download.
867 202 414-A-040808-01
Subject to change without notice
Download from Www.Somanuals.com. All Manuals Search And Download.
|