User’s Manual
CNPS7700 Series
Intel Socket 1155/1156/775 CPUs
Core i7
Core i5
Core i3
Core 2 Quad
Core 2 Duo
Pentium Dual Core
Pentium D
Pentium 4
Celeron D
AMD Socket 754/939/940 CPUs
Athlon 64
Athlon 64 X2
Athlon 64 FX
Opteron
Dual-Core Opteron
Sempron
To ensure safe and easy installation,
please read the following precautions.
Download from Www.Somanuals.com. All Manuals Search And Download.
V 2.1
3. Components
1) Common Components
Cooler
Thermal Grease
User’s Manual
Fan Mate 2
Fan Mate 2 Cable
Double-Sided Tape
2) Intel Components
Socket 1155 / 1156 / 775
S-Type Grips
Nuts
Clip Support Fixing Bolts
Washers
Clip Support
3) AMD Components
Socket 754 / 939 / 940
L-Type Grips
AMD Backplate
Backplate Fixing Bolts
Washer Plate
Download from Ww.wC.SomOanMuals.com. All Manuals Search And Download.
2
4. Installation Requirements
1) Space Requirements
The cooler’s installation requires unobstructed space with dimensions of
136㎜(width), 136㎜(height), 70㎜(depth), and the CPU as a central
reference point. Please check if components such as ODDs and PSU protrude
into the required space.
136㎜
70㎜
136㎜
2) Compatible CPUs
① Intel Socket 1155 / 1156 / 775 CPUs
Core i7 / i5 / i3
all clock speeds
Core 2 Quad
Core 2 Duo
all clock speeds
Celeron D
all clock speeds
Pentium 4
Prescott
Cedar Mill
up to 650
up to 540
all clock speeds
② AMD Socket 754 / 939 / 940 CPUs
Athlon 64 FX
up to 53
Athlon 64 X2
Athlon 64
Sempron
up to 5600+ all clock speeds all clock speeds
Download from Ww.wC.SomOanMuals.com. All Manuals Search And Download.
3
5. Installation
1) Intel Socket 1155 / 1156 / 775 Installation
① Install the Clip Support to the motherboard according to the socket-type.
Bolt(silver)
Clip Support
Socket 1155 / 1156
Socket 775
B
/
Washer
Nut
M
Caution
Lever
Slot
▶ Please make note of the Lever Slot’s direction when
installing the Clip Support.
② Clear off any particles or residue from the CPU’s surface then spread
a thorough layer of Thermal Grease on the CPU and the base of the
cooler.
Download from Ww.wC.SomOanMuals.com. All Manuals Search And Download.
4
③ Install the S-Type Grips to both sides of the Clip and fasten Bolts through
the holes of the Grips onto the Clip Support.
2) AMD Sockets 754 / 939 / 940 Installation
① Install the AMD Backplate to the motherboard using Washers and
Backplate Fixing Bolts.
Backplate Fixing Bolt
Washer
B
/
M
AMD Backplate
② Clear off any particles or residue from the CPU’s surface then spread
a thorough layer of Thermal Grease on the CPU and the base of the
cooler.
Download from Ww.wC.SomOanMuals.com. All Manuals Search And Download.
5
③ Install the L-Type Grip to both sides of the Clip and fasten Bolts through
the holes of the Grips onto the Clip Support.
6. Fan Mate 2 Installation and Usage
1) Fan Mate 2 Installation
② Fan Mate 2 can be installed to the
side of the case using Double-Sided
Tape.
① Connect Fan Mate 2 between the
Fan Cable and the motherboard
as shown in the diagram below.
Double-Sided Tape
Fan Connector (Cooler)
B
/
M
2) Fan Mate 2 Operation
Fan Speed Control Knob
Adjust the Fan Speed Control
Knob for RPM control.
BIOS Booting Error
In the case that you get a BIOS error beep:
① Rotate the Fan Speed Control Knob clockwise to the maximum setting.
② Disable CPU Fan Detected in BIOS setting or set the system monitoring
program’s CPU Fan RPM to the lowest setting.
※ Certain motherboards will not boot if the CPU fan’s RPM is not detected. In this
case inquire to the motherboard’s manufacturer for additional details.
Download from Ww.wC.SomOanMuals.com. All Manuals Search And Download.
6
GS1000 / GS1000SE
• E-ATX / Standard ATX / microATX Compatible
* Supports Intel Dual Xeon server motherboards
• UP to 6 Hot Swap HDD Bays
* GS1000(3 Standard / 3 Optional)
* GS1000 SE(Optional)
• Tool-Free HDD Installation
• Airflow Optimized Design
• Vibration Absorbing HDD Dampers and Feet
• The World’s First Roller Rails for Smooth
& Easy PSU Installation
• Cable Compartment Behind the Motherboard
for Cable Management
• Dedicated Fan Compartment for Fanless PSU Users
• Up to a Total of 8 HDD Bays
* 2 Adaptors & Bezels included for use of two 5.25” bays as 3.5” Internal(HDD)/
External(FDD) Bays
GT1000
• High-End Gaming Enclosure Built with Sturdy
All Aluminum Panels
• Three Tool-Free Hinged Magnetic Panels
(2 Left, 1 Right) for Easy Installation and
Access to Components
• Tool-Free Installation of Disk Drives,
Fan Controlles, Audio Interfaces etc.
• Accommodates up to 6 Hard Drives
• Luxurious and Cool Aesthetics.
• Color Option: Black (Red LED Fans),
Titanium (Blue LED Panel).
For more information, please visit our website.
Download from Ww.wC.SomOanMuals.com. All Manuals Search And Download.
7
|