B
DSP-AZ1
AV Amplifier
VOLUME
INPUT SELECTOR
INPUT MODE
STANDBY
/ON
6CH
SPEAKERS
A
B
SET MENU
TREBLE
NEXT
INPUT STEREO
PROGRAM
BALANCE
EFFECT
REC OUT/ZONE
SOURCE/REMOTE
2
BASS
D–TV/LD
DVD
CABLE
MD/TAPE
PROCESSOR BASS
DIRECT EXTENSION
SAT
CD–R
VCR
1
TUNER
VCR
VCR 3/DVR
VIDEO AUX
2
CD
ON
OFF
PHONO
L
R
SILENT
PHONES
VIDEO AUX
S
VIDEO
VIDEO
L
AUDIO
R
OPTICAL
OWNER’S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
INTRODUCTION
3
Features ......................................................................................................................... 4
Controls and functions .................................................................................................. 6
PREPARATIONS
13
Speaker system configurations ................................................................................... 14
Speaker placement ...................................................................................................... 16
Connections ................................................................................................................ 18
On-screen displays (OSD) .......................................................................................... 33
Speaker mode settings ................................................................................................ 34
Speaker output levels .................................................................................................. 38
BASIC OPERATIONS
41
Basic playback ............................................................................................................ 42
Basic recording ........................................................................................................... 50
ADVANCED OPERATION
51
Set menu items ............................................................................................................ 52
Remote control features .............................................................................................. 64
Adjusting the levels of the effect speakers .................................................................. 81
Sleep timer .................................................................................................................. 82
Zone 2 ......................................................................................................................... 83
SOUND FIELD PROGRAMS
85
Digital sound field processing (DSP) ......................................................................... 86
Hi-Fi DSP-sound field program .................................................................................. 88
CINEMA-DSP sound field program ........................................................................... 90
Sound field program parameter editing ...................................................................... 95
Digital sound field parameter descriptions ................................................................. 96
APPENDIX
101
Troubleshooting ........................................................................................................ 102
CINEMA EQ frequency characteristics.................................................................... 105
Reference chart for the input and output jacks ......................................................... 106
Specifications ............................................................................................................ 107
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECKING THE PACKAGE CONTENTS
Check your package to make sure it has the following items.
Remote control
MACRO
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
SYSTEM
POWER
STANDBY
V–AUX
TUNER
CD–R
PHONO
CD
CABLE
SAT
MD/TAPE
D–TV/LD
VCR
1
VCR
2
VCR3/DVR
DVD
Power cord
(except for U.K. model)
6CH INPUT
TITLE
Batteries (3) (LR6)
ENTER
PAUSE
SOURCE
DISPLAY
MENU
SOUND
SELECT
SEARCH
CHAPTER
POWER
REC
STOP
PLAY
10KEY DSP
HALL
1
1
HALL
2
2
CHURCH JAZZ CLUB
3
4
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO
1
VIDEO
2
5
6
7
8
TV
MOVIE
MOVIE
/DTS
SUR.
EX/ES
THEATER THEATER
1
THEATER
2
9
10
0
11
12
CHP/INDEX
+10
+100
A/B/C/D/E PRESET
TV INPUT
CH
MUTE
TV VOL
VOLUME
TV MUTE
STEREO
EFFECT
DISC
PARAMETER
SET MENU
ON SCREEN LEVEL
SLEEP
TEST
PUSH
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
This section describes the features of the DSP-AZ1, and its controls and functions.
FEATURES ........................................................................................................... 4
CONTROLS AND FUNCTIONS............................................................................ 6
Front panel .................................................................................................................... 6
Remote control .............................................................................................................. 8
Front panel display...................................................................................................... 11
Rear panel ................................................................................................................... 12
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
I Built-in 8-channel power amplifier
• Main:
• Center:
• Rear:
130 W + 130 W (8Ω) RMS Output Power, 0.015% THD, 20 – 20,000 Hz
130 W (8Ω) RMS Output Power, 0.015% THD, 20 – 20,000 Hz
130 W + 130 W (8Ω) RMS Output Power, 0.015% THD, 20 – 20,000 Hz
45 W + 45 W (8Ω) RMS Output Power, 0.05% THD, 1 kHz
• Front:
• Rear center: 130 W (8Ω) RMS Output Power, 0.015% THD, 20 – 20,000 Hz
I Digital Sound Fields (DSP)
Technological advances in sound reproduction over the last 30 years have enhanced the listening experience with improved clarity, precision,
and power. However, something has been missing: the atmosphere and acoustic ambience of the public venue. Our Yamaha engineers have
extensively researched the nature of sound acoustics and the way sound reflects inside a room. We sent these engineers to famous theaters
and concert halls around the world to measure the acoustics of those venues with sophisticated microphones. The data they collected is used
to recreate these environments in digital sound fields. Some of these digital sound fields have been created using data measured at the
original venue; others have been created from combinations of data to form unique environments for specific purposes. Some have been
designed especially for music, and others especially for movies. Of course, this only solves half of the problem. Because these engineers have
no way of knowing the acoustics of your entertainment room, we have made it possible for you to adjust the various parameters of this data
to tailor each virtual venue to your taste. You can use these sound fields to enhance any source and in combination with any of the following
surround sound technologies.
I CINEMA-DSP: Dolby Digital + DSP and DTS + DSP
The Dolby Digital system and DTS system show their full capability in large movie theaters, because feature film soundtracks are designed
to be reproduced in such environments. It is difficult to recreate a sound environment similar to a movie theater in your entertainment room
because of the room size, wall materials, and the number of speakers in your entertainment system. Yamaha DSP technology makes it
possible for you to enjoy nearly the same sound experience as that of a large movie theater in your entertainment room by compensating for
lack of presence and dynamics in your entertainment room with Yamaha's original digital sound fields combined with Dolby Digital or DTS
soundtracks.
I Virtual CINEMA DSP and SILENT CINEMA DSP
Yamaha developed the Virtual CINEMA DSP algorithm which allows you to experience the virtual sound fields without surround speakers.
This makes it possible for the DSP-AZ1 to produce a full surround sound catering to the number of speakers you have. The DSP-AZ1 also
has a SILENT CINEMA DSP algorithm which is achieved by the crosstalk processing applying the precise Head Related Transfer Function.
You can therefore enjoy listening to the CINEMA DSP soundfields on headphones.
I Various decoders to support the newest sound effect technology
This unit is equipped with the following signal format decoders.
• Dolby Digital and Dolby Digital EX
The Matrix decoder enables 6.1-channel playback of the 5.1-channel sources by extracting the rear center channel signals from the rear L/R
channel signals.
• DOLBY PRO LOGIC
• DOLBY PRO LOGIC
DOLBY PRO LOGIC is the improved technique to decode vast numbers of existing Dolby Surround programs. This new technology
enables a discrete 5-channel playback with two left and right main channels, a center channel, and two left and right rear channels compared
with one limited rear channel for the conventional Pro Logic technology. Also the music mode is available for 2-channel sources in addition
to the movie mode.
• DTS and DTS ES
The DSP-AZ1 is also equipped with a DTS decoder, which uses a 5.1-channel system to create a full surround sound environment. It was
developed as a way to replace the analog soundtracks of movies with six channels of digital sound. In comparison with Dolby Digital, DTS
uses less compression to store the sound information. The newly presented DTS ES system reproduces digital sound similar to Dolby Digital
EX. The use of the rear center speaker along with the existing 5.1-channel speakers provides a fully immersive cinematic audio experience.
• DTS Neo: 6
Neo: 6 decodes the conventional 2-channel sources for 6-channel playback by the specific decoder. It enables playback with the full-range
channels with higher separation just like digital discrete signal playback. Two modes are available; “Music mode” for playing music sources
and “Cinema mode” for movies.
• DTS 96/24
DTS 96/24 achieves the high quality playback with all 5.1 channels at the sampling frequency 96 kHz/24 bit.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
I Various input and output jacks
The DSP-AZ1 has various output jacks for audio and video signals as well as a digital recording output jack. Many input jacks are also
available for connection to multiple audio-video sources. All the video inputs and outputs have S-video jacks in addition to standard
composite video jacks for improved video picture quality. Component video input and output jacks are also available to deliver the excellent
video signals from DVD players and other high quality video sources. The coaxial and optical digital signal jacks (provided for direct
transmission of digital signals) automatically detect Dolby Digital, DTS, and PCM signals. A demodulator circuit is built into the Dolby
Digital RF input so you can connect it directly to the Dolby Digital RF signal output on your LD player. Additionally, there are six audio
inputs for discrete multichannel reproduction from an external decoder.
The DSP-AZ1 also comes with a monaural subwoofer jack and split subwoofer jacks which can reproduce delicate but powerful low
frequency effects.
I Multi-function remote control
The remote control can operate other audio-video components once you program the remote control using the manufacturer code and Learn
feature.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
“DTS”, “DTS-ES Extended Surround” and “Neo: 6” are trademarks of Digital Theater System, Inc.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FUNCTIONS
Front panel
1
23
45
6
78 9 0 q w e r
t
VOLUME
INPUT SELECTOR
INPUT MODE
STANDBY
/ON
6CH
SPEAKERS
SET MENU
TREBLE
NEXT
INPUT STEREO
PROGRAM
BALANCE
A
B
REC OUT/ZONE 2
SOURCE/REMOTE
EFFECT
BASS
D–TV/LD
DVD
CABLE
MD/TAPE
PROCESSOR BASS
DIRECT EXTENSION
SAT
CD–R
TUNER
CD
VCR
1
VCR
VCR 3/DVR
VIDEO AUX
2
ON
OFF
PHONO
L
R
SILENT
VIDEO AUX
OPTICAL
PHONES
S
VIDEO
VIDEO
L
AUDIO
R
y
u
i
o
p
1 STANDBY/ON
7 SET MENU +/–
Turns this unit on (On mode) and off (Standby mode). When you
turn on this unit, you will hear a click and there will be a 4 to
5-second delay before this unit can reproduce sound.
In Standby mode, this unit consumes a small amount of power so it
can respond to the remote control.
Adjusts the settings and parameter values of SET MENU items.
8 PROCESSOR DIRECT ON/OFF
When pushed in (ON), BASS, TREBLE, BALANCE, and BASS
EXTENSION are bypassed, eliminating any alteration of the
original signal.
2 INPUT MODE
Selects the mode of input for sources that output two or more types
9 NEXT
Displays SET MENU items. This button works like on the remote
control when using the SET MENU (see page 53).
of signals to this unit (see page 44).
Caution
0 6CH INPUT
• You cannot control the input mode when you select 6CH INPUT
Switches between 6CH INPUT mode and normal input modes. 6CH
INPUT mode takes priority over the source selected with INPUT
SELECTOR.
You cannot use DSP sound field programs while using an external
decoder.
as the input source.
3 INPUT SELECTOR
Selects the input source (D-TV/LD, CABLE, SAT, VCR 1, VCR 2,
VCR3/DVR, V-AUX, DVD, MD/TAPE, CD-R, TUNER, CD,
PHONO) you want to listen to or watch (see page 42).
q STEREO/EFFECT
Switches the effect speakers (center, front effect, rear and rear
center) on and off. If you turn off the output of these speakers using
STEREO/EFFECT, all DTS and Dolby Digital audio signals are
directed to the main left and right channels except for the LFE
channel.
4 Remote control sensor
Receives signals from the remote control.
5 SPEAKERS A/B
When pushed in (ON), these buttons turn on the set of main
speakers connected to the A and/or B terminals on the rear panel.
Cautions
6 Front panel display
Shows information about the operational status of this unit (see
page 11).
• When DTS or Dolby Digital signals are mixed, the left and right
main channel signal levels may not match.
• If “1B MAIN SP” on the SET MENU is set to “SMALL” and “1E
LFE/BASS OUT” is set to “SW”, or “1E LFE/BASS OUT” is set
to “BOTH”, the LFE signals will be output from the subwoofer.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FUNCTIONS
w BASS EXTENSION ON/OFF
I Opening and closing the front panel door
When you are not operating the controls behind the front panel
door, close the door.
When pushed in (ON), this feature boosts the bass frequency of the
left and right main channels by +6 dB (60 Hz) while maintaining
overall tonal balance. This boost is useful if you do not use a
subwoofer.
However, this boost may not be noticeable if the main speakers are
set to “SMALL” and the bass output mode is set to “SW.”
e PROGRAM q/w
Selects the sound field program (see page 46).
Selecting a sound field program turns on the effect.
N
A
T
U
R
A
L
S
O
U
N
D
A
V
A
M
P
L
IF
IE
R
D
S
P
–
A
Z
1
r BALANCE
Controls the balance of the sound levels coming from the left and
right main speaker(s). Setting this control to the center position is
appropriate for most situations.
t VOLUME
Controls the output level of all audio channels.
This does not affect the REC OUT level.
y BASS
Adjusts the low frequency response for the left and right main
speaker channels.
Turn the control to the right to increase the low frequency response
and turn the control to the left to decrease the low frequency
response.
Caution
• If you increase or decrease the low frequency sound to an extreme
level, the tonal quality from the center, front effect, rear center,
and rear speakers may not match that of the left and right main
speakers.
u PHONES
Outputs audio signals for private listening using headphones.
Cautions
• When you connect headphones, no signals are output to the
PREOUT jacks or the speakers.
• When the signal input into the 6CH INPUT jack is being played
back, only the left and right channel signals are output through the
headphones.
i TREBLE
Adjusts the high frequency response for the left and right main
channels.
Turn the control to the right to increase the high frequency response
and turn the control to the left to decrease the high frequency
response.
Caution
• If you increase or decrease the high frequency sound to an extreme
level, the tonal quality from the center, front effect, rear center,
and rear speakers may not match that of the left and right main
speakers.
o VIDEO AUX
Inputs audio and video signals from a portable external source such
as a video camera.
p REC OUT/ZONE 2
Selects the source you want to direct to the audio/video recorder and
ZONE 2 outputs independent of the source you are listening to in
the main room. When set to the SOURCE/REMOTE position, the
input source is directed to all outputs.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FUNCTIONS
Remote control
1 Infrared window
Outputs infrared control signals. Aim this window at the component
you want to operate.
1
2
MACRO
OFF ON
2 TRANSMIT
Flashes while the remote control is sending signals.
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
t
SYSTEM
POWER
3
4
STANDBY
V–AUX
TUNER
PHONO
CD
3 STANDBY
Sets this unit in the standby mode.
CABLE
SAT
MD/TAPE
CD–R
y
u
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
4 SYSTEM POWER
Turns on the power of this unit.
6CH INPUT
5 Display window
Shows the source component that you select to control.
TITLE
ENTER
MENU
5
SOURCE
6 SOURCE SELECT
Selects the source component without switching the input.
/
6
7
DISPLAY
SOUND
SELECT
SEARCH
CHAPTER
7 LIGHT
POWER
REC
STOP
PAUSE
PLAY
Turns the light on or off.
When you press this button once, the light turns on for about 10
seconds. Press again to turn off the light.
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
3
4
9
0
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
8 Operation section
Provides functions such as play, stop, skip, etc. for operating your
other components.
5
6
7
8
i
TV
MOVIE
MOVIE
/DTS
SUR.
8
EX/ES
THEATER THEATER 1 THEATER 2
9
10
0
11
12
CHP/INDEX
+10
+100
Caution
PRESET
A/B/C/D/E
o
p
a
• You can operate the other components that are not Yamaha with
this remote control after programming their remote control
functions (Learn) or setting the manufacturer code.
TV INPUT
TV MUTE
MUTE
TV VOL
CH
VOLUME
STEREO
EFFECT
DISC
9 10KEY/DSP
q
w
PARAMETER
SET MENU
Selects the numeric button (10KEY) mode or DSP mode. You can
use the 13 buttons to select numbers or DSP programs directly
according to the position of this switch.
ON SCREEN LEVEL
s
d
SLEEP
TEST
e
r
0 EX/ES
PUSH
Turns on or off the Dolby Digital EX or DTS ES decoder with
10KEY/DSP set to the DSP position.
q LEVEL
f
Selects the effect speaker channels (center, front, rear and
subwoofer) so you can adjust their level independently. Press this
button repeatedly to select the effect speaker channel you want to
adjust, then use + or – to adjust the level.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FUNCTIONS
w ON SCREEN
Selects the On-Screen Display mode for your video monitor (see
page 33).
e SLEEP
Sets the sleep timer.
r TEST
Selects the test mode.
t Remote control programming function buttons/
MACRO switch
Programs new remote control functions, sets manufacturer codes,
renames the input source names, or uses the Macro feature.
y Input section
Selects the input source.
Press an input selector button repeatedly to select the input mode.
u 6CH INPUT
Switches to the 6CH INPUT mode when using an external decoder
(see page 42).
i DSP program group/numeric buttons
Select DSP programs or numbers according to the position of
10KEY/DSP. (Press a button repeatedly to select a DSP program
within that group.)
o MUTE
Mutes the sound. While the mute function is on, “MUTE ON”
appears on the front panel display.
p VOLUME +/–
Increases or decreases the volume level.
a STEREO/EFFECT
Switches the effect speakers (center, front, rear, and rear center) on
and off. If the output of these speakers is switched off, all DTS and
Dolby Digital audio signals are directed to the main left and right
channels except for the LFE channel.
s PARAMETER/SET MENU
Selects the PARAMETER mode or SET MENU mode.
You can use
/
/+/– to adjust DSP program parameter values or
SET MENU items according to the position of this switch.
d
/ /+/–
Selects and adjusts DSP program parameters and SET MENU items
according to the position of PARAMETER/SET MENU.
f Cover
Slides down to show the setup buttons.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FUNCTIONS
I Installing batteries in the remote control
I About changing batteries
As the batteries wear out, the operating range of the remote control
decreases and the TRANSMIT indicator does not flash or its light
becomes dim. When you notice any of these conditions, change all
of the batteries. After you insert new batteries, be sure to push
RESET in the battery compartment using a ball point pen or similar
object before using the remote control. (This does not clear the
contents of the memory.)
Open the battery compartment cover.
1
Caution
• If the remote control is without batteries for more than 3 minutes,
or if exhausted batteries remain in the remote control, the contents
of the memory may be cleared. When the memory is cleared,
insert new batteries, set up the manufacturer code and program
any acquired functions that may have been cleared.
Insert three supplied batteries (LR6) in the correct
2
direction by aligning the + and – marks on the
batteries with the polarity markings (+ and –) on the
inside of the battery compartment.
I Using the remote control
The remote control transmits a directional infrared beam. Be sure to
aim the remote control directly at the remote control sensor on the
main unit during operation.
VOLUME
INPUT SELECTOR
INPUT MODE
STANDBY
/ON
Replace the cover as pressing until it snaps into
place.
3
NAAL SOUND AV AMPLIFIER DSP–AZ1
Approximately 6 m (20 feet)
30°
30°
Remote control
RESET
Cautions
• When the sensor is covered or there is a large object between the
remote control and the main unit, the sensor cannot receive
signals.
Cautions
• Insert the batteries in the correct direction by aligning the + and –
marks on the batteries with the polarity illustrations (+ and –)
inside the battery compartment.
• The sensor may not be able to receive signals properly when it is
exposed to direct sunlight or a strong artificial light (such as a
fluorescent or strobe light). In this case, change the direction of
the light or reposition the main unit to avoid direct lighting.
• Change the batteries periodically.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline and
manganese batteries) together. Read the packaging carefully as
these different types of batteries may have the same shape and
color.
• Handle the remote control with care.
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following types of
conditions:
1 high humidity or temperature such as near a heater, stove or
bath
2 dusty places
3 in places subject to extremely low temperatures
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FUNCTIONS
Front panel display
1
2
3
4
5
6
VOLUME
D–TV/LD
CABLE
SAT
VCR 1
VCR 2
VCR3/DVR
V–AUX
DVD
MATRIX
DISCRETE
DIGITAL
MD/TAPE
CD–R
TUNER
CD
LFE
L
C
R
DSP
RL RC RR
PHONO
SLEEP
PCM
SP
SILENT
VIRTUAL
A B
7
8
9
0
q w er
1 Input source indicator
8 VIRTUAL indicator
Shows the current input source with the arrow-shaped cursor.
Lights up when using Virtual CINEMA DSP (see page 49).
DSP
PCM
2
indicator
9
indicator
Lights up when you select a digital sound field program.
Lights up when this unit is reproducing PCM (Pulse Code Modula-
tion) digital audio signals.
/
96kHz 24bit
3
indicator
Lights up when the DTS 96/24 signal is input to this unit.
0 Headphones indicator
Lights up when headphones are connected.
4 Processor indicators
When any function of DTS, MATRIX, DISCRETE, g,
q SPEAKERS A/B indicator
Lights up according to which set of main speakers are selected.
/
PRO LOGIC
and
is activated, its indicator lights up.
Both indicators light up when both sets of speakers are selected.
5 Multi-information display
Shows the current DSP program and other information when
w SILENT indicator
adjusting or changing settings.
Lights up when headphones are connected with the sound effect
(see “SILENT CINEMA DSP” on page 49).
6 VOLUME level indicator
Indicates the volume level.
e Input channel indicator
Indicates the channel components of input signals being received.
7 SLEEP indicator
Lights up while the sleep timer is on.
LFE
r
indicator
Lights up when the input signal contains the LFE signal.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND FUNCTIONS
Rear panel
1
2
3
4
5
6
SPEAKERS
FRONT
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
COMPONENT VIDEO
B/CB
GND
R
L
R
L
Y
P
P
R/CR
DVD
VIDEO
S
R
L
LD
RF
(AC–3)
1
LD
DVD
MAINS
A
B
C
2
1
D–TV
D–TV
IMPEDANCE SELECTOR
SET BEFORE POWER ON
CD
CD
/LD
/LD
3
FRONT
:
:
:
:
:
:
6ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
FRONT
:
:
:
:
:
:
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
2
DVD
CABLE
SAT
SAT
REAR
REAR
COAXIAL
IN
TUNER
REAR CENTER
CENTER
REAR CENTER
CENTER
MAIN
A
OR
B
B
MAIN
A
OR
B
B
REAR
R
L
MONITOR
OUT
A
+
A
+
16ΩMIN./SPEAKER
4
3
CABLE
IN
(PLAY)
AC OUTLETS
SWITCHED
CD–R
PREOUT/MAIN IN
5
4
CD–R
IN
FRONT
IN
L
OUT
(REC)
OPTICAL
OUT
R
VCR
1
CONTROL
6
3
MD/
TAPE
(SURROUND)
OUT
FRONT
OUT
IN
(PLAY)
MD/TAPE
7
4
CD
REAR
IN
IN
OUT
(
SURROUND
)
(REC)
VOLTAGE SELECTOR
REMOTE
REMOTE
1
VCR
2
8
SUB
WOOFER
SPLIT
OUT
CD–R
MAIN
OUT
2
MONO
9
CENTER
R
REAR CENTER
L
IN
DVD
SURROUND
CENTER
IN
IN
R
L
VCR
3
OPTICAL
IN
B
A
MAIN
REAR CTR
/DVR
RS–
232C
0
D–TV
SUB
WOOFER
OUT
CENTER
OUT
/LD
6CH INPUT
CENTER
L
q
MAIN
IN
SAT
1
VIDEO
R
MONITOR
OUT
w
VCR
3
MAIN
OUT
CTRL
OUT
2
/DVR
10mA
MAX.
R
L
CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
+12V
DIGITAL
ZONE
2
OUT
7
8
9 0
q
w
e
(General and China models)
1 DIGITAL OPTICAL/COAXIAL jacks
7 6CH INPUT jacks
See page 19 for detailed information.
See page 32 for connection information.
2 Audio component jacks
8 ZONE 2 OUT jacks
See pages 19 and 20 for connection information.
See page 83 for connection information.
3 Video component jacks
9 REMOTE 1 IN/OUT/REMOTE 2 IN jacks
See pages 21 to 28 for connection information.
See page 83 for connection information.
4 Speaker terminals
See pages 29 and 30 for connection information.
0 RS-232C/CTRL OUT +12V terminals
These are control expansion terminals for commercial use. Consult
your dealer for details.
5 MAINS
Use this inlet to plug in the supplied power cord.
q PREOUT/MAIN IN jacks
See page 31 for connection information.
6 IMPEDANCE SELECTOR
Use this switch to match the amplifier output to your speaker
w AC OUTLET(S)
impedance. Turn off the power before you change the setting of this
switch (see page 30).
Use these outlets to supply power to your other audio/video
component.
e VOLTAGE SELECTOR (General and China models)
See page 32.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
This section explains how to make preparations (speaker selection and placement, subwoofer
usage, connection with other components, speaker mode setting, and speaker level adjustment) to
fully use the DSP-AZ1.
SPEAKER SYSTEM CONFIGURATIONS .......................................................... 14
SPEAKER PLACEMENT .................................................................................... 16
CONNECTIONS .................................................................................................. 18
Before connecting components ................................................................................... 18
Connecting digital jacks.............................................................................................. 19
Connecting audio components .................................................................................... 19
Connecting video components .................................................................................... 21
Connecting speakers ................................................................................................... 29
Connecting other components .................................................................................... 31
Connecting the power supply cords ............................................................................ 32
ON-SCREEN DISPLAYS (OSD) ......................................................................... 33
OSD modes ................................................................................................................. 33
Selecting the OSD mode ............................................................................................. 33
SPEAKER MODE SETTINGS ............................................................................ 34
SPEAKER OUTPUT LEVELS ............................................................................ 38
TEST DOLBY SUR. .................................................................................................. 39
TEST DSP................................................................................................................... 40
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SYSTEM CONFIGURATIONS
The most complete speaker configuration consists of eight speakers: the left and right main speakers, a center speaker, the left and right rear
speakers, the left and right front effect speakers, and a rear center speaker. If you do not use eight speakers, you can direct the signals for
speakers that are not in your system to other speakers in your configuration. A subwoofer can be used with any of these configurations to
produce a fuller sound.
Front effect speaker (FR)
Front effect speaker (FL)
TV (monitor)
Main speaker (R)
Rear effect speaker (RR)
1.5 – 1.8 m
(5 – 6 feet)
Center speaker (C)
Main speaker (L)
Rear center speaker (RC)
Rear effect speaker (RL)
I 8-speaker configuration –full CINEMA-DSP–
When you reproduce feature film software, this configuration fully expresses the powerful and realistic sound qualities of 70 mm multitrack
audio. The dialogue is positioned as if it were coming from directly on the screen, the sound effect is positioned slightly behind the screen,
and the soundtrack music is positioned even further behind the screen to express the width and depth of the overall presentation. This
configuration makes the most of this unit's capability.
Speakers to be used
FR
FL
• Main L/R
• Center
L
R
C
• Rear L/R
• Front effect L/R
• Rear center
RL
RC
RR
I 6-speaker configuration –Hi-Fi DSP–
This configuration is used the most for audio playback with Hi-Fi DSP. It does not position the dialogue sound as well as a 7- or 8-speaker
configuration. However, it creates a dynamic DSP (Digital Sound Field Processor) sound field which adds depth to the sound.
For this speaker configuration, change SET MENU item “1A CENTER SP” to “NONE” and “1D REAR CT SP” to “NONE”.
Speakers to be used
• Main L/R
FR
FL
L
R
(L+C)
(R+C)
• Rear L/R
• Front effect L/R
RL
RR
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SYSTEM CONFIGURATIONS
I 5-speaker configuration –standard 5.1 channel–
This configuration does not express the height of the sound field as well as the 7- or 8-speaker configuration. However, it positions the
dialogue sound as coming directly from the screen.
For this speaker configuration, change SET MENU item “1F FRONT EFCT SP” to “NONE” and “1D REAR CT SP” to “NONE”.
Speakers to be used
L
R
• Main L/R
• Center
C
(L+FL)
(R+FR)
• Rear L/R
RL
RR
I 4-speaker configuration –minimum requirement–
In this configuration, the center speaker signals and front effect speaker signals are directed to the left and right main speakers.
For this speaker configuration, change SET MENU item “1A CENTER SP” to “NONE”, item “1F FRONT EFCT SP” to “NONE”, and item
“1D REAR CT SP” to “NONE”.
Speakers to be used
L
R
• Main L/R
• Rear L/R
(L+C+FL) (R+C+FR)
RL
RR
I Speaker configurations and speaker mode
Select the appropriate speaker mode depending on the speaker configuration. See “SPEAKER MODE SETTINGS” on page 34 for details.
8 speakers
LRG/SML
7 speakers
LRG/SML
6 speakers
NONE
5 speakers
LRG/SML
4 speakers
NONE
1A CENTER SP
(Center)
1B MAIN SP
(Main L/R)
LARGE/SMALL
LRG/SML
LARGE/SMALL
LRG/SML
NONE
LARGE/SMALL
LRG/SML
NONE
LARGE/SMALL
LRG/SML
NONE
LARGE/SMALL
LRG/SML
NONE
1C REAR L/R SP
(Rear L/R)
1D REAR CT SP
(Rear center)
LRG/SML
1F FRONT EFCT SP YES
(Front effect L/R)
YES
YES
NONE
NONE
Note
• As a guideline, select “LARGE” for the larger speaker diameter than 16 cm, and “SMALL” for the smaller speaker diameter than 15 cm.
Change the speaker mode setting as listening to the actual playback sound if it does not meet your expectation.
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER PLACEMENT
Refer to the following diagram when you place the speakers.
Caution
• Use magnetically shielded speakers. If this type of speakers still creates the interference with a monitor, place the speakers away from the
monitor.
I Placing the main speakers
Place the left and right main speakers an equal distance from the main listening position.
If you have a TV or video monitor in your system, the distance of each speaker from each
side of the TV or video monitor should be the same.
TV or video
monitor
Main
Main
speaker
speaker
I Placing the center speaker
If you have a TV or video monitor in your system, align the front face of the center
speaker with the front face of the monitor. Place the speaker as close to the monitor as
possible, such as directly over or under the monitor. If you place the speaker under the
monitor, the front effect speakers can adjust the height of the sound to correspond with the
action on the screen (depending on the listener’s position). If you have a projection screen
in your system, place the center speaker under the screen. Be sure to align the speaker
with the center of the screen.
TV or video
monitor
Center speaker
I Placing the front effect, rear and rear center speakers
These speakers should be placed about 0.5 – 1 m (1 – 3 feet) outside the main speakers
1m 0.5 - 1m 1.5 - 3m 0.5 - 1m 1m
and in the front of the room. They should be turned toward the main listening position.
Place the rear speakers in the back of the room so they face the main listening position.
The rear speakers can be placed farther apart than the front effect speakers. Place these
speakers at the height of 1.5 m when listening as sitting on the floor or 1.8 m when
listening as sitting on the chair.
(3ft) (1 - 3ft) (5 - 15ft) (1 - 3ft) (3ft)
FR
FL
L
R
C
Once you begin listening to programs, continue to adjust the speaker placement until you
obtain a balanced sound from the main speakers and the front effect and rear speakers.
RL
RR
RC
This distance can be farther than the front
effect speakers’.
I When you use a projection screen
Place the speakers as shown in the illustration.
The main speakers should be placed about one-quarter of the way up from the bottom of
the screen.
Screen
Place the center speaker in the center and directly under the screen. The center speaker
provides precise dialogue localization.
When you use a projection screen with your system, the front effect speakers provide
better effect quality. The CINEMA-DSP sound field programs (see pages 90 to 94) raise
the sound from the center speaker upward and provide natural sound corresponding with
the video images.
1
L
R
1/4
C
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER PLACEMENT
I Placing the subwoofers
Place the front subwoofer near the main speakers. Turn it slightly toward the center of the room to reduce wall reflections.
If you use a rear subwoofer, place it behind the main listening position. The placement of the rear subwoofer is not critical because of the
ultra low frequencies of the sound being reproduced.
By adding a high quality subwoofer to the speaker configurations shown on page 14, you can enjoy more powerful and realistic movie
effects, even if your main speakers are large.
Front subwoofer
Rear subwoofer
Note
• If you use different brands of speakers (with different tonal qualities) in your configuration, the tone of a moving human voice and other
types of sound may not shift smoothly. We recommend that you use speakers from the same manufacturer or speakers with the same tonal
quality.
You can also adjust the output levels and equalization of your effect speakers using the SET MENU (see pages 56 and 57).
If you are using small speakers, the addition of a subwoofer will reinforce the sound effects of movies.
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Before connecting components
CAUTION
Never connect this unit and other components to mains power until all connections between components have been completed.
• Some components require different connection methods and have different jack names. Refer to the operation instructions for each
component also.
• Input and output jacks for the pin jacks are color-coded depending on the signal type.
• When connecting input and output jacks, use commercially available cables (pin-plug cable, fiber-optic cable, coaxial cable and S-Video
cable).
• When this unit interferes with the other components (such as a TV and tuner), replace this unit apart from those components. To prevent the
interference with a TV or tuner, it is recommended that an external antenna is placed and coaxial cables are used for connections.
Connecting digital jacks
Connecting audio
Connecting video
Connecting the power
^ P.19
components ^ P.19
components ^ P.21
supply cords ^ P.32
SPEAKERS
FRONT
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
COMPONENT VIDEO
B/CB
GND
R
L
R
L
Y
P
P
R/CR
DVD
VIDEO
DVD
S
R
L
LD
RF
(AC–3)
1
LD
MAINS
A
B
C
2
1
D–TV
/LD
D–TV
/LD
IMPEDANCE SELECTOR
SET BEFORE POWER ON
CD
CD
3
FRONT
:
:
:
:
:
:
6ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
FRONT
:
:
:
:
:
:
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
16ΩMIN./SPEAKER
2
DVD
CABLE
SAT
SAT
REAR
REAR
COAXIAL
IN
TUNER
REAR CENTER
CENTER
REAR CENTER
CENTER
MAIN
A
OR
B
B
MAIN
A
OR
B
B
REAR
R
L
MONITOR
OUT
A
+
A
+
4
3
CABLE
IN
(PLAY)
AC OUTLETS
SWITCHED
CD–R
PREOUT/MAIN IN
5
4
CD–R
IN
FRONT
IN
L
OUT
(REC)
OPTICAL
OUT
R
VCR 1
OUT
CONTROL
6
3
MD/
TAPE
(SURROUND)
FRONT
OUT
IN
(PLAY)
MD/TAPE
7
4
CD
REAR
IN
IN
OUT
(
SURROUND
)
(REC)
VOLTAGE SELECTOR
REMOTE
REMOTE
1
VCR 2
OUT
8
SUB
WOOFER
SPLIT
OUT
CD–R
MAIN
2
MONO
9
CENTER
R
REAR CENTER
L
IN
DVD
SURROUND
CENTER
IN
IN
R
L
VCR 3
/DVR
OPTICAL
IN
B
A
MAIN
REAR CTR
RS–
232C
0
D–TV
/LD
SUB
WOOFER
OUT
CENTER
OUT
6CH INPUT
CENTER
L
q
MAIN
IN
SAT
1
VIDEO
R
MONITOR
OUT
w
VCR
3
MAIN
OUT
CTRL
OUT
2
/DVR
10mA
MAX.
R
L
CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
+12V
DIGITAL
ZONE 2 OU
Connecting other
Connecting speakers
components ^ P.31
^ P.29
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connecting digital jacks
This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables.
Notes
• DIGITAL OUTPUT jacks and analog OUT (REC) jacks are independent. Only digital signals are output from DIGITAL OUTPUT jacks
and analog signals from OUT (REC) jacks.
• You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams.
• When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack.
• The OPTICAL jacks on this unit conform to the EIA standard. If you use a fiber optic cable that does not conform to this standard, this unit
may not function properly.
• You can designate the input for each digital jacks according to your component by using “8 I/O ASSIGNMENT” on the SET MENU (see
page 58 for details).
Digital input jacks of this unit support the following sampling frequency.
• 32 kHz
• 44.1 kHz: CD, CD-R and MD
• 48 kHz: DVD (48 kHz mode)
• 96 kHz: DVD (96 kHz mode)
• 192 kHz (coaxial input only): DVD audio (2-channel)
Connecting audio components
Before you connect any components, disconnect the power supply to all the components you plan to connect including this unit and deter-
mine which jacks are for the left and right channels and for input and output.
When you connect otherYAMAHA audio component (such as a CD player or changer, MD deck, or tape deck), connect to terminals with the
same number labels. Yamaha applies this labelling system to all its products.
I Connecting an FM/AM tuner
I Connecting a CD recorder
ANALOG AUDIO IN
OPTICAL OUT
FM/AM tuner
CD recorder
OPTICAL IN
ANALOG AUDIO
OUT
AUDIO OUT
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
GND
GND
R
L
R
L
R
L
R
L
VIDEO
DVD
S
VIDEO
DVD
S
LD
RF
(AC–3)
LD
RF
(AC–3)
1
1
LD
LD
2
2
1
1
CD
D–TV
D–TV
CD
CD
CD
/LD
/LD
3
3
2
2
DVD
CABLE
SAT
DVD
CABLE
SAT
COAXIAL
IN
COAXIAL
IN
TUNER
TUNER
4
4
3
3
CAB
E
CABLE
IN
(PLAY)
CD–R
5
4
CD–R
IN
OUT
(REC)
OPTICAL
OUT
VCR 1
OUT
6
3
MD/
TAPE
IN
(PLAY)
MD/TAPE
7
4
CD
IN
OUT
(REC)
VCR 2
OUT
8
CD–R
MAIN
9
DVD
SURROUND
IN
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
I Connecting a CD player
I Connecting a turntable
The COAXIAL CD and OPTICAL CD jacks are available for a CD
player which has coaxial or optical digital outputs.
These jacks are for connecting a turntable with an MM or high
output MC cartridge. If you have a turntable with a low output MC
cartridge, use an inline boosting transformer or MC-head amplifier
when connecting to these jacks.
OPTICAL OUT
CD Player
COAXIAL OUT
ANALOG AUDIO OUT
Turntable
AUDIO OUT
Ground
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
S VIDEO
GND
R
L
R
L
VIDEO
DVD
LD
RF
(AC–3)
1
LD
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
S VIDEO
2
1
D–TV
GND
R
L
R
L
VIDEO
DVD
CD
CD
/LD
LD
RF
(AC–3)
1
LD
3
2
DVD
CABLE
SAT
COAXIAL
IN
TUNER
2
1
D–TV
CD
CD
/LD
4
3
CABLE
IN
3
2
(PLAY)
DVD
CABLE
SAT
COAXIAL
IN
TUNER
CD–R
5
4
CD–R
IN
OUT
4
3
N
(REC)
CABLE
OPTICAL
OUT
VCR 1
OUT
6
3
MD/
TAPE
IN
(PLAY)
MD/TAPE
7
Caution
4
CD
IN
OUT
(REC)
VCR 2
OUT
• The GND terminal does not electrically ground the turntable. It
simply reduces noise in the signal. In some cases, you may hear
less noise if you do not connect to the GND terminal.
8
CD–R
MAIN
I Connecting an MD recorder/tape deck
OPTICAL IN
MD recorder/tape deck
ANALOG AUDIO
OUT
ANALOG AUDIO
IN
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
S VIDEO
GND
R
L
R
L
VIDEO
DVD
LD
RF
(AC–3)
1
LD
2
1
D–TV
CD
CD
/LD
3
2
DVD
CABLE
SAT
COAXIAL
IN
TUNER
4
3
CABLE
IN
(PLAY)
CD–R
5
4
CD–R
IN
OUT
(REC)
OPTICAL
OUT
VCR 1
OUT
6
3
MD/
TAPE
IN
(PLAY)
MD/TAPE
7
4
CD
IN
OUT
(REC)
VCR 2
OUT
8
CD–R
MAIN
Note
• To connect the OPTICAL (COAXIAL) output jack for an MD
recorder with this unit, you can use any of the OPTICAL
(COAXIAL) IN jacks by changing the setting for “8 I/O ASSIGN-
MENT” on the SET MENU.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connecting video components
Before you connect any components, disconnect the power supply to all the components you plan to connect including this unit and deter-
mine which jacks are for the left and right channels and for input and output. After you finish all connections, check them again to make sure
they are correct.
I About the video jacks
There are three types of video jacks.
1
2
3
SPEAKERS
FRONT
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
COMPONENT VIDEO
B/CB
GND
R
L
R
L
Y
P
P
R/CR
DVD
VIDEO
S
R
L
LD
RF
(AC–3)
1
LD
DVD
MAINS
A
B
C
2
1
D–TV
D–TV
IMPEDANCE SELECTOR
SET BEFORE POWER ON
CD
CD
/LD
/LD
3
FRONT
:
:
:
:
:
:
6ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
FRONT
:
:
:
:
:
:
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
16ΩMIN./SPEAKER
2
DVD
CABLE
SAT
SAT
REAR
REAR
COAXIAL
IN
TUNER
REAR CENTER
CENTER
REAR CENTER
CENTER
MAIN
A
OR
B
B
MAIN
A
OR
B
B
REAR
R
L
MONITOR
OUT
A
+
A
+
4
3
CABLE
IN
(PLAY)
AC OUTLETS
SWITCHED
CD–R
PREOUT/MAIN IN
5
4
CD–R
IN
FRONT
IN
L
OUT
(REC)
OPTICAL
OUT
R
VCR
1
CONTROL
6
3
MD/
TAPE
(SURROUND)
OUT
FRONT
OUT
IN
(PLAY)
MD/TAPE
7
4
CD
REAR
IN
IN
OUT
(
SURROUND
)
(REC)
VOLTAGE SELECTOR
VCR
2
REMOTE
REMOTE
1
8
SUB
WOOFER
SPLIT
OUT
CD–R
MAIN
OUT
2
MONO
9
CENTER
R
REAR CENTER
L
IN
DVD
SURROUND
CENTER
IN
IN
R
L
VCR
3
OPTICAL
IN
B
A
MAIN
REAR CTR
/DVR
RS–
232C
0
D–TV
SUB
WOOFER
OUT
CENTER
OUT
/LD
6CH INPUT
CENTER
L
q
MAIN
IN
SAT
1
VIDEO
R
MONITOR
OUT
w
VCR
3
MAIN
OUT
CTRL
OUT
2
/DVR
10mA
MAX.
R
L
CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
+12V
DIGITAL
ZONE
2
OUT
1 Composite VIDEO jack
Video signals input through the VIDEO jacks are the conventional
Cautions
• Use a commercially available S-video cable when connecting to
the S VIDEO jacks, and commercially available video cables
when connecting to the COMPONENT VIDEO jacks.
• Each type of video jack works independently. Signals input
through the composite video, S-video, and component jacks are
output through the corresponding composite video, S-video, and
component jacks respectively.
composite video signals.
2 S VIDEO jack
Video signals input through the S VIDEO jacks are separated into
luminance (Y) and color (C) video signals. The S-video signals
achieve high quality color reproduction. When you are using the S
VIDEO jacks, check the details in the owner’s manual that came
with the component being connected.
• If your video monitor is connected only to the COMPONENT
VIDEO jacks of this unit, the OSD is not shown.
3 COMPONENT VIDEO jacks
Video signals input through the COMPONENT VIDEO jacks are
separated into luminance (Y) and color difference (PB/CB, PR/CR)
Note
• You can designate the input for the COMPONENT VIDEO A, B
and C jacks according to your component by using “8 I/O
ASSIGNMENT” on the SET MENU (see page 58 for details).
video signals. The jacks are also separated into three for each signal.
The labels of the component video jacks may be different depend-
ing on the component (e.g. Y, CB, CR / Y, PB, PR / Y, B-Y, R-Y/ etc.).
Component video signals provide the best quality in picture
reproduction. When you are using the COMPONENT VIDEO
jacks, check the details in the owner’s manual that came with the
component being connected.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
I Connecting a DVD player
• Connect the left and right analog signal output jacks on your DVD player to the DVD L and R jacks. Connect the composite video signal
output jack on your DVD player to the DVD VIDEO jack.
• If your DVD player has an S-video output or component video output, you can connect it to this unit. Connect the S-video signal output
jack on your DVD player to the DVD S VIDEO jack or connect the component video signal output jacks on your DVD player to the DVD
COMPONENT VIDEO jacks.
• Connect the optical digital signal output jack on your DVD player to the OPTICAL DVD jack.
• Connect the coaxial digital signal output jack on your DVD player to the COAXIAL DVD jack.
OPTICAL OUT
DVD player
COMPONENT VIDEO OUT
COAXIAL OUT
ANALOG AUDIO
OUT
VIDEO S VIDEO
OUT
OUT
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
COMPONENT VIDEO
B/CB
GND
R
L
R
L
Y
P
P
R/CR
DVD
VIDEO
S
LD
RF
(AC–3)
1
LD
DVD
A
B
C
2
1
D–TV
D–TV
CD
CD
/LD
/LD
3
2
DVD
CABLE
SAT
SAT
COAXIAL
IN
TUNER
MONITOR
OUT
4
3
CABLE
IN
(PLAY)
CD–R
PREOUT/MAIN IN
5
4
CD–R
IN
FRONT
IN
L
OUT
(REC)
OPTICAL
OUT
R
VCR 1
OUT
CONTROL
6
3
MD/
TAPE
FRONT
OUT
IN
(PLAY)
MD/TAPE
7
4
CD
REAR
IN
IN
OUT
(
SURROUND
)
(REC)
REMOTE
REMOTE
1
VCR 2
OUT
8
SUB
WOOFER
SPLIT
OUT
CD–R
MAIN
2
MONO
9
IN
DVD
SURROUND
CENTER
IN
IN
VCR 3
/DVR
OPTICAL
IN
REAR CTR
RS–
232C
0
D–TV
SUB
WOOFER
OUT
CENTER
OUT
/LD
6CH INPUT
CENTER
L
q
MAIN
IN
SAT
1
VIDEO
R
MONITOR
OUT
w
VCR
3
MAIN
OUT
CTRL
OUT
2
/DVR
10mA
MAX.
R
L
+12V
DIGITAL
ZONE 2 OUT
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
I Connecting a digital TV/TV
• Connect the left and right analog signal output jacks on your digital TV/TV to the D-TV/LD L and R jacks. Connect the composite video
signal output jack on your digital TV/TV to the D-TV/LD VIDEO jack.
• If your digital TV/TV has an S-video output or component video output, you can connect it to this unit. Connect the S-video signal output
jack on your digital TV/TV to the D-TV/LD S VIDEO jack or connect the component video signal output jacks on your digital TV/TV to
the D-TV/LD COMPONENT VIDEO jacks.
• Connect the optical digital signal output jack on your digital TV/TV to the OPTICAL D-TV/LD jack.
DigitalTV/TV
OPTICAL OUT
COMPONENT VIDEO OUT
ANALOG AUDIO
OUT
VIDEO S VIDEO
OUT
OUT
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
COMPONENT VIDEO
B/CB
GND
R
L
R
L
Y
P
P
R/CR
DVD
VIDEO
S
LD
RF
(AC–3)
1
LD
DVD
A
B
C
2
1
D–TV
D–TV
CD
CD
/LD
/LD
3
2
DVD
CABLE
SAT
SAT
COAXIAL
IN
TUNER
MONITOR
OUT
4
3
CABLE
IN
(PLAY)
CD–R
PREOUT/MAIN IN
5
4
CD–R
IN
FRONT
IN
L
OUT
(REC)
OPTICAL
OUT
R
VCR 1
OUT
CONTROL
6
3
MD/
TAPE
FRONT
OUT
IN
(PLAY)
MD/TAPE
7
4
CD
REAR
IN
IN
OUT
(
SURROUND
)
(REC)
REMOTE
REMOTE
1
VCR 2
OUT
8
SUB
WOOFER
SPLIT
OUT
CD–R
MAIN
2
MONO
9
IN
DVD
SURROUND
CENTER
IN
IN
VCR 3
/DVR
OPTICAL
IN
REAR CTR
RS–
232C
0
D–TV
SUB
WOOFER
OUT
CENTER
OUT
/LD
6CH INPUT
CENTER
L
q
MAIN
IN
SAT
1
VIDEO
R
MONITOR
OUT
w
VCR
3
MAIN
OUT
CTRL
OUT
2
/DVR
10mA
MAX.
R
L
+12V
DIGITAL
ZONE 2 OUT
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
I Connecting a cable TV tuner
• Connect the left and right analog signal output jacks on your cable TV tuner to the CABLE L and R jacks. Connect the composite video
signal output jack on your cable TV tuner to the CABLE VIDEO jack.
• If your cable TV tuner has an S-video output or component video output, you can connect it to this unit. Connect the S-video signal output
jack on your cable TV tuner to the CABLE S VIDEO jack or connect the component video signal output jacks on your cable TV tuner to
the SAT COMPONENT VIDEO jacks.
• Connect the optical digital signal output jack on your cable TV tuner to the OPTICAL SAT jack.
• Connect the coaxial digital signal output jack on your cable TV tuner to the COAXIAL CABLE jack.
OPTICAL OUT
Cable TV tuner
COMPONENT VIDEO OUT
COAXIAL OUT
ANALOG AUDIO
OUT
VIDEO S VIDEO
OUT
OUT
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
COMPONENT VIDEO
B/CB
GND
R
L
R
L
Y
P
P
R/CR
DVD
VIDEO
S
LD
RF
(AC–3)
1
LD
DVD
A
B
C
2
1
D–TV
D–TV
CD
CD
/LD
/LD
3
2
DVD
CABLE
SAT
SAT
COAXIAL
IN
TUNER
MONITOR
OUT
4
3
CABLE
IN
(PLAY)
CD–R
PREOUT/MAIN IN
5
4
CD–R
IN
FRONT
IN
L
OUT
(REC)
OPTICAL
OUT
R
VCR 1
OUT
CONTROL
6
3
MD/
TAPE
FRONT
OUT
IN
(PLAY)
MD/TAPE
7
4
CD
REAR
IN
IN
OUT
(
SURROUND
)
(REC)
REMOTE
REMOTE
1
VCR 2
OUT
8
SUB
WOOFER
SPLIT
OUT
CD–R
MAIN
2
MONO
9
IN
DVD
SURROUND
CENTER
IN
IN
VCR 3
/DVR
OPTICAL
IN
REAR CTR
RS–
232C
0
D–TV
SUB
WOOFER
OUT
CENTER
OUT
/LD
6CH INPUT
CENTER
L
q
MAIN
IN
SAT
1
VIDEO
R
MONITOR
OUT
w
VCR
3
MAIN
OUT
CTRL
OUT
2
/DVR
10mA
MAX.
R
L
+12V
DIGITAL
ZONE 2 OUT
Cautions
• When connecting the optical digital signal output jack on your cable TV tuner, it is necessary to change the setting for the OPTICAL SAT
jack of “8 I/O ASSIGNMENT” on the SET MENU in order to connect the digital audio signals to the SAT jack and the video signals to
CABLE jack. (See page 58.)
• When connecting the component video signal output jacks on your cable TV tuner, it is necessary to change the setting for SAT COMPO-
NENT VIDEO jacks of “8 I/O ASSIGNMENT” on the SET MENU in order to connect the audio signals to the CABLE jack and the
component video signal to the SAT jack. (See page 58.)
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
I Connecting a satellite tuner
• Connect the left and right analog signal output jacks on your satellite tuner to the SAT L and R jacks. Connect the composite video signal
output jack on your satellite tuner to the SAT VIDEO jack.
• If your satellite tuner has an S-video output or component video output, you can connect it to this unit. Connect the S-video signal output
jack on your satellite tuner to the SAT S VIDEO jack or connect the component video signal output jacks on your satellite tuner to the SAT
COMPONENT VIDEO jacks.
• Connect the optical digital signal output jack on your satellite tuner to the OPTICAL SAT jack.
• Connect the coaxial digital signal output jack on your satellite tuner to the COAXIAL CABLE jack.
OPTICAL OUT
Satellite tuner
COMPONENT VIDEO OUT
COAXIAL OUT
ANALOG AUDIO
OUT
VIDEO S VIDEO
OUT
OUT
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
COMPONENT VIDEO
B/CB
GND
R
L
R
L
Y
P
P
R/CR
DVD
VIDEO
S
LD
RF
(AC–3)
1
LD
DVD
A
B
C
2
1
D–TV
D–TV
CD
CD
/LD
/LD
3
2
DVD
CABLE
SAT
SAT
COAXIAL
IN
TUNER
MONITOR
OUT
4
3
CABLE
IN
(PLAY)
CD–R
PREOUT/MAIN IN
5
4
CD–R
IN
FRONT
IN
L
OUT
(REC)
OPTICAL
OUT
R
VCR 1
OUT
CONTROL
6
3
MD/
TAPE
FRONT
OUT
IN
(PLAY)
MD/TAPE
7
4
CD
REAR
IN
IN
OUT
(
SURROUND
)
(REC)
REMOTE
REMOTE
1
VCR 2
OUT
8
SUB
WOOFER
SPLIT
OUT
CD–R
MAIN
2
MONO
9
IN
DVD
SURROUND
CENTER
IN
IN
VCR 3
/DVR
OPTICAL
IN
REAR CTR
RS–
232C
0
D–TV
SUB
WOOFER
OUT
CENTER
OUT
/LD
6CH INPUT
CENTER
L
q
MAIN
IN
SAT
1
VIDEO
R
MONITOR
OUT
w
VCR
3
MAIN
OUT
CTRL
OUT
2
/DVR
10mA
MAX.
R
L
+12V
DIGITAL
ZONE 2 OUT
Caution
• When connecting the coaxial digital signal output jack on your satellite tuner, it is necessary to change the setting for the COAXIAL
CABLE jack of “8 I/O ASSIGNMENT” on the SET MENU in order to connect the digital audio signals to the CABLE jack and the video
signals to SAT jack. (See page 58.)
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
I Connecting a VCR
• Connect the left and right audio signal output jacks on your VCR to the VCR 1 IN L and R jacks. Connect the left and right audio signal
input jacks on your VCR to the VCR 1 OUT L and R jacks. Connect the composite video signal output jack on your VCR to the VCR 1
VIDEO IN jack. Connect the composite video signal input jack on your VCR to the VCR 1 VIDEO OUT jack.
• If your VCR has an S-video output, you can connect it to this unit. Connect the S-video signal output jack on your VCR to the VCR 1 IN S
VIDEO jack. If your VCR has an S-video input, you can connect it to this unit. Connect the S-video signal input jack on your VCR to the
VCR 1 OUT S VIDEO jack.
• If your VCR has an optical digital signal output jack, connect it to the OPTICAL VCR 3/DVR jack.
S VIDEO IN
VIDEO IN
AUDIO IN
VCR
AUDIO OUT
VIDEO
OUT
S VIDEO
OUT
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
COMPONENT VIDEO
B/CB
GND
R
L
R
L
Y
P
P
R/CR
DVD
VIDEO
DVD
S
LD
RF
(AC–3)
1
LD
A
B
C
2
1
D–TV
D–TV
CD
CD
/LD
/LD
3
2
DVD
CABLE
SAT
SAT
COAXIAL
IN
TUNER
MONITOR
OUT
4
3
CABLE
IN
(PLAY)
CD–R
PREOUT/MAIN IN
5
4
CD–R
IN
FRONT
IN
L
OUT
(REC)
OPTICAL
OUT
R
VCR 1
OUT
CONTROL
6
3
MD/
TAPE
FRONT
OUT
IN
(PLAY)
MD/TAPE
7
4
CD
REAR
IN
IN
OUT
(
SURROUND
)
(REC)
REMOTE
REMOTE
1
VCR 2
OUT
8
SUB
WOOFER
SPLIT
OUT
CD–R
MAIN
2
MONO
9
IN
DVD
SURROUND
CENTER
IN
IN
VCR 3
/DVR
OPTICAL
IN
REAR CTR
RS–
232C
0
D–TV
SUB
WOOFER
OUT
CENTER
OUT
/LD
6CH INPUT
CENTER
L
q
MAIN
IN
SAT
1
VIDEO
R
MONITOR
OUT
w
VCR
3
MAIN
OUT
CTRL
OUT
2
/DVR
10mA
MAX.
R
L
+12V
DIGITAL
ZONE 2 OUT
This jack is for connecting with the
component that has an optical digital output
jack such as a DVD recorder.
Note
• You can connect other VCRs to the this unit using the VCR 2 and VCR 3/DVR jacks.
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
I Connecting an LD player
• Connect the left and right audio signal output jacks on your LD player to the D-TV/LD L and R jacks. Connect the composite video signal
output jack on your LD player to the D-TV/LD VIDEO jack.
• If your LD player has an S-video output, you can connect it to this unit. Connect the S-video signal output jack on your LD player to the D-
TV/LD S VIDEO jack.
• Connect the optical digital signal output jack on your LD player to the OPTICAL D-TV/LD jack.
• Connect the RF signal output jack on your LD player to the LD q RF (AC-3) jack.
OPTICAL OUT
LD player
q RF OUT
ANALOG AUDIO
OUT
VIDEO
OUT
S VIDEO OUT
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
COMPONENT VIDEO
GND
R
L
R
L
Y
PB/CB
PR/CR
DVD
VIDEO
DVD
S
LD
RF
(AC–3)
1
LD
A
B
C
2
1
D–TV
D–TV
CD
CD
/LD
/LD
3
2
DVD
CABLE
SAT
SAT
COAXIAL
IN
TUNER
MONITOR
OUT
4
3
CABLE
IN
(PLAY)
CD–R
PREOUT/MAIN IN
5
4
CD–R
IN
FRONT
IN
L
OUT
(REC)
OPTICAL
OUT
R
VCR 1
OUT
CONTROL
6
3
MD/
TAPE
FRONT
OUT
IN
(PLAY)
MD/TAPE
7
4
CD
REAR
IN
IN
OUT
(
SURROUND
)
(REC)
REMOTE
REMOTE
1
VCR 2
OUT
8
SUB
WOOFER
SPLIT
OUT
CD–R
MAIN
2
MONO
9
IN
DVD
SURROUND
CENTER
IN
IN
VCR 3
/DVR
OPTICAL
IN
REAR CTR
RS–
232C
0
D–TV
SUB
WOOFER
OUT
CENTER
OUT
/LD
6CH INPUT
CENTER
L
q
MAIN
IN
SAT
1
VIDEO
R
MONITOR
OUT
w
VCR
3
MAIN
OUT
CTRL
OUT
2
/DVR
10mA
MAX.
R
L
+12V
DIGITAL
ZONE 2 OUT
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
I Connecting a video monitor
• Connect the composite video signal input jack on your video monitor to MONITOR OUT 1 VIDEO jack.
• If your video monitor has an S-video input or component video input, you can connect it to this unit. Connect the S-video signal input jack
on your video monitor to the MONITOR OUT 1 S VIDEO jack or connect the component video signal input jacks on your video monitor
to the COMPONENT VIDEO MONITOR OUT jacks.
Video monitor
VIDEO IN
COMPONENT VIDEO IN
S VIDEO
IN
DIGITAL
AUDIO
PHONO
AUDIO
VIDEO
VIDEO
COMPONENT VIDEO
B/CB
GND
R
L
R
L
Y
P
P
R/CR
DVD
VIDEO
DVD
S
LD
RF
(AC–3)
1
LD
A
B
C
2
1
D–TV
/LD
D–TV
/LD
CD
CD
3
2
DVD
CABLE
SAT
SAT
COAXIAL
IN
TUNER
MONITOR
OUT
4
3
CABLE
IN
(PLAY)
CD–R
PREOUT/MAIN IN
5
4
CD–R
IN
FRONT
IN
L
OUT
(REC)
OPTICAL
OUT
R
VCR 1
OUT
CONTROL
6
3
MD/
TAPE
FRONT
OUT
IN
(PLAY)
MD/TAPE
7
4
CD
REAR
IN
IN
OUT
(
SURROUND
)
(REC)
REMOTE
REMOTE
1
VCR 2
OUT
8
SUB
WOOFER
SPLIT
OUT
CD–R
MAIN
2
MONO
9
IN
DVD
SURROUND
CENTER
IN
IN
VCR 3
/DVR
OPTICAL
IN
REAR CTR
RS–
232C
0
D–TV
/LD
SUB
WOOFER
OUT
CENTER
OUT
6CH INPUT
CENTER
L
q
MAIN
IN
SAT
1
VIDEO
R
MONITOR
OUT
w
VCR
3
MAIN
OUT
CTRL
OUT
2
/DVR
10mA
MAX.
R
L
+12V
DIGITAL
ZONE 2 OUT
These jacks can be used to
connect another monitor.
Note
• You can connect another monitor to this unit using the MONITOR OUT 2 jacks.
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connecting speakers
• Be sure to connect the left channel (L), right channel (R), “+”
(red) and “–” (black) properly. If the connections are faulty, no
sound will be heard from the speakers, and if the polarity of the
speaker connections is incorrect, the sound will be unnatural and
lack bass.
Front effect speakers
Rear speakers
Right
Left
Right
Left
Center speaker
• Connect the speaker cables with care to avoid creating a short
circuit. If you turn on the power and there is a short circuit, this
unit may be damaged even though the protection circuit automati-
cally shuts off the power.
SPEAKERS
FRONT
R
L
After you finish connecting your speakers, use the SET MENU to
change the signal output settings according to the number and size
of the speakers in your configuration.
REAR
R
L
(
SURROUND)
CENTER
R
REAR CENTER
L
R
L
B
A
MAIN
CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
Right
Left
Right
Left
Rear center
speaker
Main B speakers
Main A speakers
I Connecting the SPEAKERS terminals
A speaker cable is actually a pair of insulated cables running side by
side. One of the cables is colored or shaped differently, perhaps with
a stripe, groove or ridge.
Good
No good
10mm
Strip off 10 mm (3/8˝) of insulation from the ends of
the cables.
1
Twist the exposed wires of the cable together to
prevent short circuits.
2
Loosen the terminal knob by turning it counterclock-
wise.
Speaker cable
3
Insert only the exposed portion of the cable into the
slot in the side of the terminal, and tighten the
terminal knob.
4
Note
• If your speaker cables have banana plugs, tighten the terminal
knob and insert the plug into the end of the terminal. (Except for
Europe and U.K. models)
Banana plug
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Subwoofer system
Right
Subwoofer system
Left
I Connecting a front subwoofer
Connect the signal input jack on your subwoofer to the PREOUT/
MAIN IN SUBWOOFER MONO jack.
PREOUT/MAIN IN
FRONT
IN
L
R
CONTROL
By connecting two subwoofers to the SUBWOOFER SPLIT jacks,
this unit can reproduce subtle directional changes in the low
frequency sounds.
When you use two subwoofers, connect both of them to the
SUBWOOFER SPLIT jacks using pin plugs.
FRONT
OUT
REAR
IN
(
SURROUND)
REMOTE
REMOTE
1
SUB
WOOFER
SPLIT
OUT
2
MONO
IN
CENTER
IN
REAR CTR
RS–
232C
CENTER
OUT
MAIN
IN
CTRL
OUT
MAIN
OUT
10mA
MAX.
R
L
+12V
Subwoofer system
I Connecting a rear subwoofer
Right rear speaker
Left rear speaker
By using both front and rear subwoofers, the CINEMA-DSP sound
field programs can produce realistic movie effects with powerful,
dynamic sound. To take advantage of this dynamic sound, be sure to
set the “1C REAR L/R SP” item in the SET MENU to “LARGE”
(see page 36).
SPEAKERS
R
FRONT
L
Caution
Subwoofer system
• Adjust the speaker volume for the subwoofer with the controls on
the subwoofers, not on this unit.
REAR
R
L
(
SURROUND)
CENTER
REAR CENTER
I Impedance selector switch
Select the position whose requirements your speaker system meets.
WARNING
Do not change the IMPEDANCE SELECTOR switch setting
while the power to this unit is on, otherwise this unit may be
damaged.
IF THIS UNIT FAILS TO TURN ON WHEN THE STANDBY/
ON SWITCH IS PRESSED:
The IMPEDANCE SELECTOR switch may not be set to either
end. If so, set the switch to either end when this unit is in the
standby mode.
(Upper position)
Front effect: The impedance of each speaker must be 6Ω or
higher.
Rear:
The impedance of each speaker must be 4Ω or
higher.
Rear Center: The impedance of the speaker must be 4Ω or higher.
Center:
The impedance of the speaker must be 4Ω or higher.
Main:
If you use one pair of main speakers, the impedance
of each speaker must be 4Ω or higher. If you use
two pairs of main speakers, the impedance of each
speaker must be 8Ω or higher.
MAINS
(Lower position)
IMPEDANCE SELECTOR
SET BEFORE POWER ON
Front effect: The impedance of each speaker must be 8Ω or
higher.
FRONT
:
:
:
:
:
:
6ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
FRONT
:
:
:
:
:
:
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
16ΩMIN./SPEAKER
REAR
REAR
REAR CENTER
CENTER
REAR CENTER
CENTER
Rear:
The impedance of each speaker must be 8Ω or
MAIN
A
OR
B
B
MAIN
A
OR
B
B
A
+
A
+
higher.
AC OUTLETS
SWITCHED
Rear Center: The impedance of the speaker must be 8Ω or higher.
Center:
The impedance of the speaker must be 8Ω or higher.
Main:
If you use one pair of main speakers, the impedance
of each speaker must be 8Ω or higher. If you use
two pairs of main speakers, the impedance of each
speaker must be 16Ω or higher.
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connecting other components
I Connecting external amplifiers
If you want to increase the power output to the speakers, or want to use another amplifier, connect an external amplifier to the PREOUT/
MAIN IN terminals as follows.
Caution
• When an RCA pin-plug cable is connected to the PREOUT jack in order to output to the external amplifier, do not connect speakers to this
unit. If you do, the sound will be output from both speakers connected to the external amplifier and this unit.
PREOUT/MAIN IN
FRONT
IN
R
L
6
5
FRONT
OUT
REAR
(
SURROUND)
SUB
WOOFER
SPLIT
MONO
4
3
CENTER
IN
REAR CTR
2
1
CENTER
OUT
MAIN
IN
MAIN
OUT
R
L
1 MAIN jacks
4 SUBWOOFER jacks
MAIN OUT jacks
Subwoofers reinforce very low frequencies.
Main channel line output jacks. The signals output through
these jacks are affected by VOLUME, BASS, TREBLE, and
BASS EXTENSION settings.
MONO
Main, center and rear channel frequencies below 90 Hz are
output through this jack. You can also direct DTS and Dolby
Digital LFE signals to this output.
MAIN IN jacks
Line input to this unit’s main channel amplifiers. When
connecting to these jacks, signals input to the preamplifier of
this unit will not be output from the main amplifier of this unit.
SPLIT
The SPLIT jacks output stereo separation for the main and rear
channels and a split mono signal for the center and LFE
channels.
2 CENTER jacks
CENTER OUT jack
Center channel line output jacks.
Adjust the volume level of the subwoofer with the control on the
subwoofer. Depending on the settings in SET MENU item
“1 SPEAKER SET”, some signals may not be output from the
SUBWOOFER jacks.
CENTER IN jack
Line input to this unit’s center channel amplifier. When
connecting to these jacks, signals input to the preamplifier of
this unit will not be output from the center amplifier of this unit.
5 REAR (SURROUND) jacks
Rear channel line output jacks.
3 REAR CTR jack
Rear center channel line output jack.
6 FRONT jacks
FRONT OUT jacks
Front effect channel line output jacks.
FRONT IN jacks
Line input to this unit’s front effect channel amplifiers. When
connecting to these jacks, signals input to the preamplifier of
this unit will not be output from the front effect amplifier of this
unit.
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
SUBWOOFER
OUTPUT
I Connecting an external decoder
CENTER OUTPUT
External decoder
This unit is equipped with six additional input jacks (left and right
MAIN, CENTER, left and right SURROUND and
SURROUND
OUTPUT
MAIN OUTPUT
SUBWOOFER) for discrete multi-channel input from an external
decoder, sound processor, or pre-amplifier. Connect the output jacks
on your external decoder to the 6CH INPUT jacks.
Notes
• When you select “6CH INPUT” as the input source, this unit
automatically turns off the digital sound field processor, and you
cannot listen to DSP programs.
8
CD–R
MAIN
9
DVD
SURROUND
• When you select “6CH INPUT” as the input source, settings of “1
SPEAKER SET” on the SET MENU do not apply (except for “1G
MAIN LEVEL”).
OPTICAL
IN
0
D–TV
/LD
SUB
WOOFER
6CH INPUT
CENTER
L
q
SAT
VIDEO
R
w
VCR
3
/DVR
DIGITAL
ZONE 2 OUT
I Connecting a game console
VIDEO AUX
These jacks are used to connect any video input source such as a
game console and a video camera to this unit.
OPTICAL
S
VIDEO
VIDEO
L
AUDIO
R
OPTICAL OUT
AUDIO OUT R
AUDIO OUT L
VIDEO OUT
S VIDEO OUT
Game console or video camera
Connecting the power supply cords
I Connecting the AC power cord
Plug the power cord into the AC inlet when all connections are
complete, and then plug in the AC power cord to the wall outlet.
Caution
To AC outlet
• Do not use other AC power cords than the one provided. Other-
wise it may result in causing fire or an electrical shock.
[U.K. model]
Plug in this unit to the wall outlet.
MAINS
IMPEDANCE SELECTOR
SET BEFORE POWER ON
I AC OUTLET(S)
Europe, General and China models ............................... 3 OUTLETS
U.K. model ...................................................................... 1 OUTLET
FRONT
:
:
:
:
:
:
6ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
FRONT
:
:
:
:
:
:
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
16ΩMIN./SPEAKER
REAR
REAR
REAR CENTER
CENTER
REAR CENTER
CENTER
MAIN
A
OR
B
B
MAIN
A
OR
B
B
A
+
A
+
AC OUTLETS
SWITCHED
AC OUTLET(S)
SWITCHED
100W MAX. TOTAL
Use these outlets to connect the power cords from your components
to this unit. The power to the AC OUTLET(S) is controlled by this
unit’s STANDBY/ON (or SYSTEM POWER and STANDBY).
These outlets will supply power to any connected component
whenever this unit is turned on. The maximum power (total power
consumption of components) that can be connected to the AC
OUTLET(S) is 100 W.
VOLTAGE SELECTOR
VOLTAGE SELECTOR
I VOLTAGE SELECTOR
(General and China models)
(General and China models)
The voltage selector on the rear panel of this unit must be set for
your local voltage before plugging into the AC main supply.
Voltages are 110/120/220/240 V AC, 50/60 Hz.
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN DISPLAYS (OSD)
You can display the operation information for this unit on a video monitor. If you display the SET MENU and DSP sound field program
parameter settings on a screen, it is much easier to see the available options and parameters than it is by reading this information on the front
panel display.
Notes
• If a video source is being reproduced, the OSD is superimposed over the image.
• The OSD signal is not output through the REC OUT selector, and will not be recorded with any video signal.
OSD modes
You can change the amount of information the OSD shows.
Full display:
This mode always shows the sound field program parameter settings on the video monitor (see page 95).
Short display: This mode briefly shows the same contents as the front panel display at the bottom of the screen, then disappears.
Display off:
This mode briefly shows the “DISPLAY OFF” message at the bottom of the screen, then disappears. Afterwards, no
changes to operations appear on the screen except those of the ON SCREEN.
P10 MOVIE THEATER
70mm Spectacle
1
≥
EFCT TRIM…………0dB
P.INIT.DLY……13ms
P.ROOM SIZE……1.0
S.DELAY……………23ms
S.ROOM SIZE……1.0
P10 MOVIE THEATER
70mm Spectacle
1
Full display
Short display
Notes
• The SET MENU, “TEST DOLBY SUR.” and “TEST DSP” appear regardless of the OSD mode.
• When you choose the Full Display mode, INPUT SELECTOR, VOLUME and some other types of operation information are displayed at
the bottom of the screen in the same format as the front panel display.
Selecting the OSD mode
A/B/C/D/E PRESET
Turn on the video monitor connected to this unit.
1
2
TV INPUT
TV MUTE
MUTE
TV VOL
CH
VOLUME
Press ON SCREEN on the remote control repeatedly
to change the display mode.
STEREO
DISC
EFFECT
The OSD mode changes in the following order: full display,
short display, and display off.
PARAMETER
SET MENU
ON SCREEN LEVEL
2
SLEEP
TEST
Cautions
• If your video monitor is connected only to the COMPONENT
VIDEO terminals of this unit, the OSD is not shown.
PUSH
• If you choose a video input source that has component connected
to both the S VIDEO IN and composite VIDEO IN jacks, and both
the S VIDEO OUT and composite VIDEO OUT jacks are
connected to a video monitor, the video signal is output to both the
S VIDEO OUT and VIDEO OUT jacks. However, the OSD is
carried only on the S-video signal. If no video signal is input, the
OSD is carried on both the S-video and composite video signals.
• Playing back video software that has an anti-copy signal or video
signals with a lot of noise may produce unstable images.
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER MODE SETTINGS
This unit has seven SPEAKER SET items in the SET MENU that you must set according to the number of speakers in your configuration
and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings as well as other possible settings. If
the initial settings are not appropriate for your speaker configuration, change the settings in the SET MENU.
I Summary of SPEAKER SET items 1A through 1G
Control value (default
setting indicated in bold)
Item
Description
1A CENTER SP
Selects the output mode according to whether or not a center speaker is being used and its
performance.
LRG/SML/NONE
1B MAIN SP
Selects the output mode according to the performance of the main speakers.
LARGE/SMALL
LRG/SML/NONE
1C REAR L/R SP
Selects the output mode according to whether or not rear L/R speakers are being used and
their performance.
1D REAR CT SP
Selects the output mode according to whether or not a rear center speaker is being used and its LRG/SML/NONE
performance.
1E LFE/BASS OUT
Selects the speaker according to use for LFE signal output and low bass signal.
SW/MAIN/BOTH
YES/NONE
1F FRONT EFCT SP Selects the output mode according to whether or not front effect speakers are being used.
1G MAIN LEVEL
Selects the main speaker level.
Normal/–10dB
Cautions
• When you select 6CH INPUT as the input source, settings of “1 SPEAKER SET” on the SET MENU do not apply (except for “1G MAIN
LEVEL”).
• When the digital signals with over 96 kHz sampling frequency are input, only the “1G MAIN LEVEL” setting is effective.
I Mode setting
Enter the setting mode.
Adjustment should be made with the remote control.
3
Press +/– on the remote control to enter the setting mode. The
current setting is shown on the front panel display and the
video monitor. Select the item (1A – 1G) to be set by pressing
Set PARAMETER/SET MENU to SET MENU.
1
PARAMETER
SET MENU
/
on the remote control.
1A CENTER SP
Select “1 SPEAKER SET” on the SET MENU.
2
Press
/
on the remote control to display the SET MENU on
the monitor. Press
on the SET MENU.
/
repeatedly to select “1 SPEAKER SET”
“LRG SML NONE
SET MENU 1/5
Change the setting.
Press +/– on the remote control repeatedly to change the setting
for the selected item.
4
5
≥
1
2
3
4
SPEAKER SET
LOW FREQ.TEST
HP TONE CTRL
CENTER GEQ
/
-/+
:
:
Up/Down
Enter
Close the SET MENU.
Press
/
repeatedly until the DSP program name appears to
close SET MENU or press one of the DSP program buttons on
the remote control.
HALL 1
HALL 2
CHURCH JAZZ CLUB
1
2
3
4
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
6
7
8
TV
MOVIE
MOVIE
/DTS
SUR.
THEATER THEATER 1 THEATER 2
9
10
0
11
12
+10
+100
Note
• This setting operation can be done by using NEXT and SET
MENU +/– on the front panel.
E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER MODE SETTINGS
I 1A CENTER SP (center speaker mode)
By adding a center speaker to your speaker configuration, this unit can provide good dialogue localization for many listeners and superior
synchronization of sound and images. The OSD shows a large, small, or no center speaker depending on how you set this item. The initial
setting is “LRG”.
LRG:
SML:
Select the “LRG” (Large) setting if you have a large center speaker. The entire range of center channel signals is sent to the center
speaker.
Select the “SML” (Small) setting if you have a small center speaker. Center channel low frequency signals of 90 Hz and below
are directed to the speakers selected with the “1E LFE/BASS OUT” item.
NONE: Select the “NONE” setting if you do not have a center speaker. All of the center channel signals are directed to the left and right
main speakers.
1A CENTER SP
1A CENTER SP
LRG “SML NONE
1A CENTER SP
LRG SML “NONE
“LRG SML NONE
I 1B MAIN SP (main speaker mode)
The display shows small or large main speakers depending on how you set this item. The initial setting is “LARGE”.
LARGE: Select the “LARGE” setting if you have large main speakers. The entire range of left and right main channel signals is directed to
the left and right main speakers.
SMALL: Select the “SMALL” setting if you have small main speakers. The main channel low frequency signals of 90 Hz and below are
directed to the speakers selected with the “1E LFE/BASS OUT” item.
1B MAIN SP
1B MAIN SP
“LARGE SMALL
LARGE “SMALL
Caution
• When you select the “MAIN” setting for the “1E LFE/BASS OUT” item, the main channel low frequency signals of 90 Hz and below are
directed to the main speakers even if you select the “SMALL” setting for the main speaker mode.
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER MODE SETTINGS
I 1C REAR L/R SP (rear speaker mode)
The OSD shows large, small, or no rear speakers depending on how you set this item. The initial setting is “LRG”.
LRG:
Select the “LRG” setting if you have large left and right rear speakers or if you use a rear subwoofer. The entire range of rear
channel signals is sent to the left and right rear speakers.
SML:
Select the “SML” setting if you have small left and right rear speakers. Rear channel low frequency signals of 90 Hz and below
are directed to the speakers selected with the “1E LFE/BASS OUT” item.
NONE:
Select the “NONE” setting if you do not have rear speakers. All of the rear channel signals are directed to the left and right main
speakers.
1C REAR L/R SP
1C REAR L/R SP
1C REAR L/R SP
“LRG SML NONE
LRG “SML NONE
LRG SML “NONE
Caution
• In this case, the rear center speaker will automatically be set to “NONE” and the “1D REAR CT SP” item will be skipped.
I 1D REAR CT SP (rear center speaker mode)
By adding a rear center speaker to your speaker configuration, this unit can provide more realistic front-to-back and back-to-front transitions.
The initial setting is “LRG”.
LRG:
Select the “LRG” setting if you have a large rear center speaker. The entire range of rear center channel signals is sent to the rear
center speakers.
SML:
Select the “SML” (small) setting if you have a small rear center speaker. Rear center channel low frequency signals of 90 Hz and
below are distributed to speakers selected with the “1E LFE/BASS OUT” item.
NONE:
Select the “NONE” setting if you do not have a rear center speaker. The rear center signal is directed to the rear L/R speakers.
1D REAR CT SP
“LRG SML NONE
1D REAR CT SP
LRG “SML NONE
1D REAR CT SP
LRG SML “NONE
Caution
• If “1C REAR L/R SP” is set to “NONE”, “1D REAR CT SP” will be skipped from the SET MENU and the setting cannot be changed.
E-36
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER MODE SETTINGS
I 1E LFE/BASS OUT (bass output mode)
LFE signals carry low frequency effects when this unit decodes DTS or Dolby Digital signals. Low frequency signals are defined as 90 Hz
and below. The initial setting is “BOTH”.
SW:
MAIN:
BOTH:
Select the “SW” (subwoofer) setting if you use a subwoofer. The LFE signals are directed to the subwoofer.
Select the “MAIN” setting if you do not use a subwoofer. The LFE signals are directed to the main speakers.
Select the “BOTH” setting if you use a subwoofer and you want to mix the main channel low frequency sound signals with the
LFE signals.
1E LFE/BASS OUT
1E LFE/BASS OUT
1E LFE/BASS OUT
“SW MAIN BOTH
SW “MAIN BOTH
SW MAIN “BOTH
Caution
• The low frequency signals of 90 Hz and below from all main, center, rear, and rear center channels are directed to the LFE channel when
you select the small speaker setting in items 1A, 1B, 1C, and 1D.
I 1F FRONT EFCT SP (front effect speaker mode)
This unit uses front effect speakers to localize the virtual sound sources of the sound field programs. If you do not use front effect speakers,
you can direct the front effect signals to the main speakers.
The OSD shows small or no front effect speakers depending on how you set this item. The initial setting is “YES”.
YES:
Select the “YES” setting if you use front effect speakers.
NONE: Select the “NONE” setting if you do not use front effect speakers. The front effect signals are mixed with the main channels.
1F FRONT EFCT SP
“YES NONE
1F FRONT EFCT SP
YES “NONE
I 1G MAIN LEVEL
Change this setting if you cannot match the sound volume of the front effect, rear, center, and rear center speakers with the main speakers
because of the unusually high efficiency performance of the main speakers. The initial setting is “Normal”.
Normal: Select the “Normal” setting if you can match the volume of your effect speakers with the volume of your main speakers using the
“TEST DOLBY SUR.”.
–10dB: Select the “–10dB” setting if you cannot match the volume of your effect speakers with the volume of your main speakers using
the “TEST DOLBY SUR.”.
1G MAIN LEVEL
“Normal -10dB
1G MAIN LEVEL
Normal “-10dB
E-37
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER OUTPUT LEVELS
This section explains how to set the speaker output levels using the test tone generator. The “TEST DOLBY SUR.” is for balancing the
output levels of the six speakers required for surround sound systems. The “TEST DSP” is for balancing the front effect speakers with the
main speakers for the DSP sound field programs.
I Button/switch to be used for adjustment
I Before you begin
A/B/C/D/E PRESET
1 Set BASS,TREBLE and BALANCE on the front panel
TV INPUT
TV MUTE
MUTE
to the center position.
TV VOL
CH
VOLUME
STEREO
BALANCE
BASS
TREBLE
DISC
EFFECT
PARAMETER
SET MENU
ON SCREEN LEVEL
PARAMETER/SET
MENU
L
R
SLEEP
TEST
TEST
PUSH
2 Turn off BASS EXTENSION.
BASS
EXTENSION
3 Set PARAMETER/SET MENU on the remote control to
PARAMETER.
PARAMETER
SET MENU
Cautions
• Since this unit cannot enter the test mode while headphones are
connected to this unit, be sure to unplug the headphones from the
PHONES jack when using the test tone.
• If the headphone is connected while “TEST DOLBY SUR.” or
“TEST DSP” is being used, the testing mode will be cancelled.
E-38
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER OUTPUT LEVELS
TEST DOLBY SUR.
Select “TEST DOLBY SUR.” to match the output levels of the center, rear center and left and right rear speakers to the left and right main
speakers.
Press TEST on the remote control.
“TEST DOLBY SUR.” appears on the video monitor and front
panel display.
Press +/– repeatedly to adjust the output level of the
effect speakers so that the output level coming from
each speaker is the same.
1
3
Each speaker level can be adjusted in the range of –10 to +10
dB.
TEST DOLBY SUR.
While adjusting, the test tone is heard from the selected
speaker.
TEST
Cautions
LEFT
• If “1A CENTER SP” on the SET MENU is set to “NONE”,
the center channel sound is automatically output from the left
and right main speakers.
TEST DOLBY SUR.
LEFT
• If “1C REAR L/R SP” on the SET MENU is set to “NONE”,
the output level of the rear left, right and center speakers
cannot be adjusted in step 3.
The test tone is produced from the left main speaker, center
speaker, right main speaker, right rear speaker, rear center
speaker and left rear speaker in order. The tone is produced for
2.5 seconds each time. You can also select the speaker to be
adjusted by pressing / .
• If “1D REAR CT SP” on the SET MENU is set to “NONE”,
the output level of the rear center speaker cannot be adjusted
in step 3.
• Main L/R speaker level cannot be adjusted by itself. Use
VOLUME to adjust the main volume.
Press TEST to enter the TEST DSP mode.
Press TEST again to stop the test tone and the DSP program
name appears on the front panel display and the video monitor.
4
L
R
C
Notes
• The tonal quality of the speakers can be adjusted using the “4
CENTER GEQ”, “5 REAR CT GEQ”, and “6 CINEMA EQ”
items in the SET MENU (see pages 55 to 57).
RC
• You can increase the output levels of the effect channels (left rear,
right rear, rear renter and center) to +10 dB. If the output level of
the center, rear, and rear center speakers is lower than that from
the main speakers even after you have increased the sound volume
level of the center, rear, and rear center speakers up to +10 dB, set
the “1G MAIN LEVEL” item in the SET MENU to “–10dB”.
Setting the “1G MAIN LEVEL” item to this setting decreases the
main speaker volume level to about one-third the normal level.
After you set the “1G MAIN LEVEL” item in the SET MENU to
“–10dB”, adjust the levels for the center, rear, and rear center
speakers again.
Caution
• Speakers whose settings are set to “NONE” in “1 SPEAKER
SET” (except for “1A CENTER SP”) on the SET MENU will
be skipped and no test tone will be output.
Adjust VOLUME +/– so you can hear the test tone.
2
Caution
• If the test tone cannot be heard, turn down the volume, set
this unit in the standby mode and check the speaker connec-
tions.
• The adjustment of output levels of the center speaker, and left and
right rear speakers is also effective to the speaker output level
during the playback of the source connected to 6CH INPUT jacks.
E-39
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER OUTPUT LEVELS
TEST DSP
Select “TEST DSP” to match the output levels of the front effect speakers to the main speakers.
Caution
• You cannot enter the TEST DSP mode if “1F FRONT EFCT SP” is set to “NONE”.
Press TEST repeatedly.
“TEST DSP” appears on the video monitor and front panel
Press TEST to close TEST DSP.
The test tone stops and the DSP program name appears on the
1
4
display.
front panel display and the video monitor.
Notes
TEST DSP
• The tonal quality of the speakers can be adjusted using the “6
CINEMA EQ” item in the SET MENU (see pages 56 and 57).
TEST
• If the sound volume of the front effect speakers is lower than
that of the main speakers, even after you have increased the
output level up to +10 dB, set the “1G MAIN LEVEL” item
in the SET MENU to “–10dB”. Setting the “1G MAIN
LEVEL” item to “–10dB” decreases the main speaker output
level to about one-third of the normal level. After you set the
“1G MAIN LEVEL” item in the SET MENU to “–10dB”,
repeat the “TEST DOLBY SUR.” procedure on the previous
page.
MAIN
TEST DSP
MAIN
The test tone is produced alternately from the front effect
speakers and main speakers. The tone is produced for 2.5
seconds each time. Press to hear the test tone from the front
effect L speaker (FRONT L), and to hear the test tone from
the front effect R speaker (FRONT R).
L
R
C
RC
Adjust VOLUME +/– so you can hear the test tone.
2
3
Caution
• If the test tone cannot be heard, turn down the volume, set
this unit in the standby mode and check the speaker connec-
tions.
Press +/– repeatedly to adjust the output level of the
front effect speakers so that the output level coming
from each speaker is the same.
The front effect speaker level can be adjusted in the range of
–10 to +10 dB. Test tone is output only from the front effect
speakers.
Caution
• Main L/R speaker level cannot be adjusted.
E-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
This section explains the playback operation, DSP program selection and recording operation.
BASIC PLAYBACK ............................................................................................. 42
Input modes and indications ....................................................................................... 44
Selecting a sound field program ................................................................................. 46
BASIC RECORDING .......................................................................................... 50
E-41
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
MACRO
OFF ON
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
SYSTEM
POWER
STANDBY
V–AUX
TUNER
CD–R
PHONO
CD
1
3
2
3
6
5
1
3
3
CABLE
SAT
MD/TAPE
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
VOLUME
6CH INPUT
INPUT SELECTOR
TITLE
ENTER
MENU
INPUT MODE
STANDBY
/ON
SOURCE
6CH
SPEAKERS
SET MENU
TREBLE
NEXT
INPUT STEREO
PROGRAM
BALANCE
A
B
DISPLAY
SEARCH
SOUND
REC OUT/ZONE
SOURCE/REMOTE
D–TV/LD
2
EFFECT
SELECT
BASS
CHAPTER
DVD
CABLE
MD/TAPE
PROCESSOR BASS
DIRECT EXTENSION
SAT
CD–R
VCR
1
TUNER
VCR
VCR 3/DVR
VIDEO AUX
2
CD
ON
OFF
POWER
REC
STOP
PAUSE
PLAY
PHONO
L
R
SILENT
PHONES
VIDEO AUX
OPTICAL
S
VIDEO
VIDEO
L
AUDIO
R
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
3
4
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
6
7
8
6
5
TV
MOVIE
MOVIE
/DTS
SUR.
EX/ES
THEATER THEATER
1
THEATER
2
9
10
0
11
12
CHP/INDEX
+10
+100
A/B/C/D/E PRESET
5
5
5
TV INPUT
CH
MUTE
TV VOL
VOLUME
STEREO
EFFECT
TV MUTE
DISC
Press STANDBY/ON (SYSTEM POWER on the remote
control) to turn on the power.
The front panel (and the monitor screen) shows the level of the
volume for a few seconds and then switches to show the current
sound field program.
To select a source connected to the 6CH INPUT jacks, press
6CH INPUT until “6CH INPUT” appears on the front panel
display.
1
2
3
6CH
INPUT
6CH INPUT
SYSTEM
POWER
STANDBY
/ON
Press SPEAKERS A or B to select the main speakers
to be used.
If you are using two sets of main speakers, press both A and B.
The speaker indicator(s) for the selected set(s) lights up on the
6CH INPUT
Cautions
front panel display.
• If “6CH INPUT” is shown on the front panel display, no other
source can be played. To select another input source with
INPUT SELECTOR (one of the input selector buttons),
press 6CH INPUT to turn off “6CH INPUT” from the front
panel display.
SPEAKERS
A
B
• The input source name corresponds to the jack name to which
the input component is connected. If the component is not
connected to its corresponding jack, input source name and
the playback component do not match. (For example, if a CD
player is connected to the MD input jack and MD is selected
as an input source, the playback sound will be output from the
CD player.) In this case, the input source name can be
Select the source using INPUT SELECTOR, or press
one of the input selector buttons on the remote
control.
The current source name and input mode appear on the front
panel display and the video monitor for a few seconds.
V–AUX
TUNER
PHONO
CD
INPUT SELECTOR
changed with “7 INPUT RENAME” on the SET MENU.
CABLE
SAT
MD/TAPE
CD–R
Start playback or select a broadcast station on the
source component.
4
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
Refer to the operation instructions for the component.
Selected input source
VOLUME
LFE
D–TV/LD
CABLE
SAT
DVD
MD/TAPE
CD–R
TUNER
CD
INPUT
DVD
VCR
VCR
1
2
L
C
R
DSP
RL RC RR
VCR3/DVR
PHONO
V–AUX
AUTO:DTS
SP
A
E-42
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Adjust the volume to the desired output level.
I BGV (Back Ground Video) function
5
VOLUME
The BGV (Back Ground Video) function allows you to combine a
video signal from a video source with a sound signal from an audio
source. (For example, you can listen to classical music while you
are watching a video.)
VOLUME
Using the remote control, select a source from the video group, then
select a source from the audio group. Use the input selector buttons
on the remote control to make your selections.
If desired, use BASS, TREBLE, BASS EXTENSION and
BALANCE. These controls are only effective for sound from
the main speakers.
V–AUX
TUNER
PHONO
CABLE
SAT
MD/TAPE
CD–R
CD
BALANCE
BASS
TREBLE
BASS
EXTENSION
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
L
R
Cautions
Note
• If the component connected to the VCR 1 OUT, VCR 2
OUT, VCR 3/DVR OUT, CD-R OUT and MD/TAPE OUT
jacks is turned off, the reproduced sound may be distorted or
the volume may be lowered for the characteristics of A/V
component. In this case, turn on the component.
• The BGV function does not work if you select the sources using
INPUT SELECTOR on the front panel.
I To mute the sound
Press MUTE on the remote control. To resume the audio output,
press MUTE again.
• While PROCESSOR DIRECT is tuned on, tone controls
(BASS and TREBLE) or/and BASS EXTENSION cannot
be activated.
MUT
Select a DSP program if desired.
6
Use PROGRAM q/w (DSP program buttons on the remote
control) to select a DSP program. See pages 86 to 94 for details
about the DSP program.
Notes
• You can also cancel mute to press any operation buttons such as
VOLUME +/–.
HALL 1
HALL 2
CHURCH JAZZ CLUB
1
2
3
4
• While the mute function is on, “MUTE ON” appears on the front
panel display.
ROCK
ENTER–
CONCERT CONCERT
PROGRAM
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
6
7
8
TV
MOVIE
MOVIE
/DTS
SUR.
• When this unit enters the standby mode, the mute function will be
cancelled.
EX/ES
THEATER THEATER 1 THEATER 2
9
10
0
11
12
CHP/INDEX
+10
+100
I When you have finished using this unit
Press STANDBY/ON (STANDBY on the remote control) to set
this unit in the standby mode.
STANDBY
STANDBY
/ON
E-43
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Input modes and indications
This unit comes with various input jacks. If your external compo-
nent is connected to more than one type of input jack, you can set
the priority of the input signal. Press INPUT MODE on the front
panel or an input selector button (press it repeatedly) on the remote
control to display or change the input mode.
I Notes on the digital signal
The digital input jacks of this unit can handle up to 192 kHz
sampling digital signal. Both OPTICAL and COAXIAL input jacks
can be used to input the digital signal up to 96 kHz. However when
inputting the higher digital signals than 96 kHz, be aware the
following points.
V–AUX
TUNER
PHONO
• DSP programs cannot be selected. Sound will be output as normal
2-channel stereo sound from only the left and right main speakers.
CABLE
SAT
MD/TAPE
CD–R
CD
INPUT MODE
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
• Use the coaxial input (COAXIAL IN) jack to input over 96 kHz
digital signal. The signals may not be correctly played back if the
optical input (OPTICAL IN) jack is used.
Sound effects will be added to 96 kHz sampling digital signals after
converted to 48 kHz.
VOLUME
LFE
D–TV/LD
CABLE
SAT
DVD
MD/TAPE
CD–R
TUNER
CD
PHONO
INPUT
DVD
VCR
VCR
1
2
L
C
R
DSP
RL RC RR
VCR3/DVR
V–AUX
AUTO:DTS
SP
A
Input mode
AUTO: This mode is automatically selected when you turn on the
power of this unit. In this mode, the input signal is automatically
selected in the following order.
1 Digital signals
2 Analog signals
<When D-TV/LD is selected as the input source>
1 Dolby Digital RF encoded signals
2 Digital signals
3 Analog signals
D.D. RF: This unit only selects Dolby Digital RF signals (when D-
TV/LD is selected as the input source).
DTS: In this mode, only digital input signals encoded with DTS are
selected even if other signals are input at the same time.
DGTL: This unit only selects digital signals input through the
OPTICAL or COAXIAL jacks (when D-TV/LD is selected as the
input source).
ANALOG: In this mode, only analog input signals are selected
even if digital signals are input at the same time.
Cautions
• When you turn on the power of this unit, the input mode is set
according to “9 INPUT MODE” on the SET MENU (see page 59
for details).
• When you connect components to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
E-44
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
I Notes on playing DTS-CD/LDs
• If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding even if you
make a digital connection between this unit and the player.
I Notes on playing an LD source
• For LD software that does not contain a digital soundtrack,
connect the LD player to the analog jacks and set the input mode
to “AUTO” or “ANALOG”.
• If you play a source encoded with a DTS signal and set the input
mode to “ANALOG”, this unit may reproduce the noise of an
unprocessed DTS signal. In this case, connect the source to a
digital input jack and set the input mode to “AUTO” or “DTS”.
• If the LD player is transmitting a signal by a non-standard method,
this unit cannot detect the Dolby Digital or DTS signal. In this
case, the decoder automatically switches to PCM or analog.
• Some A/V components such as LD players output different audio
signals through their analog and digital jacks. Change the input
mode as necessary.
• If you switch the input mode to “ANALOG” while playing a
source encoded with a DTS signal, this unit reproduces no sound.
• If you play a source encoded with a DTS signal with the input
mode set to “AUTO”, this unit automatically switches to the DTS-
decoding mode (The “t” indicator lights up.) after having
detected the DTS signal. When playback of the DTS source is
completed, the “t” indicator may flash. While this indicator is
flashing, only DTS source can be played. If you want to play a
normal PCM source soon, set the input mode back to “AUTO”.
• While you are operating the LD player and playing a disc encoded
with a Dolby Digital signal, if you switch from the pause or
chapter forwarding function to normal playback, you may hear the
PCM or analog sound an instant before the Dolby Digital signal is
played. In this case, set the input mode to “D.D.RF”.
• If you play a source encoded with a DTS signal with the input
mode set to “AUTO”, the “t” indicator may flash when a
search or skip operation is performed while the DTS source is
playing back with the input mode set to “AUTO”. If this status
continues for longer than 30 seconds, this unit will automatically
switch from “DTS-decoding” mode to PCM digital signal input
mode. The “t” indicator will turn off.
E-45
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Selecting a sound field program
You can enhance your listening experience by selecting a DSP program. There are 12 programs with sub-programs available with this unit.
However the selection depends on the input signal format and not all the sub-programs are possible for all input signal formats. For details
about each program, see pages 86 to 94.
MACRO
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
2
CABLE
SAT
MD/TAPE
CD–R
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
VOLUME
6CH INPUT
TITLE
ENTER
MENU
INPUT SELECTOR
INPUT MODE
STANDBY
/ON
SOURCE
DISPLAY
SEARCH
SOUND
6CH
SPEAKERS
SET MENU
TREBLE
NEXT
INPUT STEREO
PROGRAM
BALANCE
A
B
SELECT
CHAPTER
REC OUT/ZONE
SOURCE/REMOTE
2
EFFECT
BASS
D–TV/LD
DVD
CABLE
MD/TAPE
PROCESSOR BASS
DIRECT EXTENSION
POWER
REC
STOP
PAUSE
PLAY
SAT
CD–R
VCR
1
TUNER
VCR
VCR 3/DVR
VIDEO AUX
2
CD
ON
OFF
PHONO
L
R
SILENT
PHONES
VIDEO AUX
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
3
4
OPTICAL
S
VIDEO
VIDEO
L
AUDIO
R
1
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
6
7
8
2
TV
MOVIE
MOVIE
/DTS
SUR.
EX/ES
THEATER THEATER
1
THEATER
2
9
10
0
11
12
CHP/INDEX
+10
+100
A/B/C/D/E PRESET
TV INPUT
CH
MUTE
TV VOL
VOLUME
STEREO
EFFECT
TV MUTE
DISC
Set 10KEY/DSP to DSP on the remote control.
Cautions
1
2
10KEY DSP
• If a Dolby Digital or DTS signal is input when the input mode
is set to “AUTO”, the DSP program automatically switches to
the appropriate decoding program.
• Choose a DSP program based on your listening preference,
and not on the name of the program. The acoustics of your
listening room affect the DSP program. Minimize the sound
reflections in your room to maximize the effect created by the
program.
Press PROGRAM q/w (one of the DSP program
buttons on the remote control) to select the desired
program.
After selecting the desired program, press the same button
repeatedly to select the desired sub-program if available.
• When you select an input source, this unit automatically
selects the last DSP program used with that source.
• Example: Each time MOVIE THEATER 1 is pressed the
subprograms (“Spectacle” and “Sci-Fi”) switch.
• When you set this unit in the standby mode, the current
source and DSP program are memorized and are automati-
cally selected when you turn on the power again.
HALL 1
HALL 2
CHURCH JAZZ CLUB
1
2
3
4
ROCK
ENTER–
CONCERT CONCERT
PROGRAM
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
6
7
8
• When a source connected to the 6CH INPUT jacks of this
unit is selected, the digital sound field processor cannot be
used.
TV
MOVIE
MOVIE
/DTS
SUR.
EX/ES
THEATER THEATER 1 THEATER 2
9
10
0
11
12
CHP/INDEX
+10
+100
• While the over 96 kHz sampling digital signals are being
input, sound effects cannot be added and only normal stereo
playback is possible.
VOLUME
D–TV/LD
CABLE
SAT
DVD
MD/TAPE
CD–R
TUNER
CD
MOVIE THEATER 1
DTS Spectacle
LFE
• Sound effects will be added to 96 kHz sampling digital
signals after converted to 48 kHz.
VCR
VCR
1
2
L
C
R
DSP
RL RC RR
VCR3/DVR
V–AUX
PHONO
SP
A
E-46
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
I Normal stereo reproduction
Press STEREO/EFFECT to turn off the sound effect for normal
stereo reproduction.
Cautions
• If you turn off the sound effect, no sound is output from the center
speaker, rear speakers, rear center speaker and front effect
speakers.
STEREO
STEREO
• If you turn off the sound effect while a Dolby Digital or DTS
signal is being output, the dynamic range of the signal is automati-
cally compressed and the sounds of the center and rear speaker
channels are mixed and output from the main speakers.
EFFEC
EFFEC
• The volume may be greatly reduced when you turn off the sound
effect or if you set “12 DYNAMIC RANGE” on the SET MENU
to “MIN”. In this case turn on the sound effect.
STEREO
3/2/LFE
DTS
I Displaying the information about the input
When “STEREO” is selected while Dolby Digital, DTS, or PCM
signals are being played, the following information will be shown
on the front panel display.
source
During the stereo reproduction, information about the signal being
played back can be displayed by setting PARAMETER/SET
When Dolby Digital signals are played:
“Dolby D” + the number of channels (front/rear/ LFE signal)
MENU to PARAMETER and then pressing
/
. The three types of
information shown below are displayed as switched every time is
pressed.
STEREO
Dolby D 2/0/---
fs (Sampling frequency):
STEREO
fs:48kHz
When DTS signals are played:
“DTS” + the number of channels (front/rear/ LFE signal)
“unknown” is displayed when the sampling frequency for the input
signal is not known.
STEREO
DTS
3/2/LFE
rate (Bit rate):
When PCM signals are played:
“PCM” + sampling frequency
STEREO
rate:1920kbps
STEREO
PCM 48kHz
“unknown” is displayed when the bit rate of the input signal is not
known.
flg (Identification flag):
When analog signals are played:
STEREO
flg:ES Mtrx 6.1
STEREO
Analog
“None” is displayed when the flag contained in the input signal to
be used for signal process cannot be detected.
E-47
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
I Playing the Dolby Digital EX or DTS ES
I
Selecting PRO LOGIC, PRO LOGIC or Neo: 6
software
You can enjoy the 2-channel sources decoded into five or six
discrete channels by selecting PRO LOGIC, PRO LOGIC or Neo:
6 in the program No. 12.
Press EX/ES to turn on the Dolby Digital EX or DTS ES decoder to
listen to the Dolby Digital EX and DTS ES software with a rear
center speaker.
Select a 2-channel source and start playback on the
source component.
1
The display changes AUTO ^ Discrete 6.1 ^ Matrix 6.1 ^ OFF
each time the EX/ES is pressed.
Press the numeric button 12 repeatedly to select the
EX/ES
2
decoder; PRO LOGIC, PRO LOGIC or Neo: 6.
The decoder selection switches among PRO LOGIC, PRO
LOGIC and Neo: 6 on the front panel display.
CHP/IND
/DTS
SUR.
MATRIX/DISCRETE indicator
12
VOLUME
D–TV/LD
CABLE
SAT
DVD
MATRIX
DISCRETE
+100
MD/TAPE
CD–R
TUNER
CD
EX/ES
LFE
VCR
VCR
1
2
L
C
R
DSP
RL RC RR
VCR3/DVR
PHONO
V–AUX
AUTO:Disc 6.1
SP
A
PRO LOGIC
Normal
AUTO: This mode automatically switches Dolby Digital EX/DTS
ES Matrix 6.1/DTS ES Discrete 6.1 depending on the signal in the
input source that this unit can detect. Rear center speaker does not
work for 5.1 channel sources.
DOLBY PRO LOGIC decoder
PRO LOGIC
Enhanced
Discrete 6.1: This mode can be selected when the source with
DTS ES Discrete format has been detected. (The “DISCRETE”
indicator lights up.)
Matrix 6.1: This mode makes 6-channel playback of the input
source with Matrix or Matrix compatible format through the Matrix
6.1 decoder. (The “MATRIX” indicator lights up.)
PRO LOGIC
Movie
DOLBY PRO LOGIC
decoder
OFF: Rear center speaker does not work in this mode.
PRO LOGIC
Music
Cautions
• Some 6.1-channel compatible discs do not have the signal (flag)
which this unit can automatically detect. When playing this kind
of discs with 6.1 channel, select “Matrix 6.1”.
• 6.1-channel playback is not possible even if EX/ES is pressed in
the following cases:
Neo:6
Cinema
1 when “1C REAR L/R SP” is set to “NONE”
2 when the sound effect is turned off
DTS Neo: 6 decoder
3 when the source connected to the 6CH INPUT jack is being
Neo:6
Music
played
4 when Dolby Digital KARAOKE source is being played
Cautions
• Playback using DOLBY PRO LOGIC and DTS Neo: 6 decoders
is possible only for 2-channel signals.
• PROGRAM q/w on the front panel can be also used to select
these programs.
E-48
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
I Virtual CINEMA DSP
With the Virtual CINEMA DSP, you can enjoy all the DSP
programs without rear speakers. It creates the virtual speakers to
reproduce the natural sound field.
The sound field processing is changed to the Virtual CINEMA DSP
mode according to the selected DSP program by setting “1C REAR
L/R SP” on the SET MENU to “NONE”.
I SILENT CINEMA DSP
You can enjoy the powerful sound field as if there were actual
speakers with the SILENT CINEMA DSP. You can listen to
SILENT CINEMA DSP by connecting your headphones to the
PHONES jack while the digital sound field processor is on. Enjoy
all the DSP program using the headphones. The “SILENT”
indicator lights up on the front panel display. (If the sound effect is
off, you listen to the source with normal stereo reproduction.)
Caution
Caution
• This unit is not set in the virtual CINEMA DSP mode even if “1C
REAR L/R SP” is set to “NONE” in the following cases:
• This unit is not set in the SILENT CINEMA DSP mode even if the
sound effect is on in the following cases:
1 when the 8ch Stereo, DOLBY DIGITAL Normal, PRO
LOGIC Normal, PRO LOGIC , DTS Normal or Neo: 6
program is selected;
1 when over 96 kHz sampling digital signals are being input
2 when 6CH INPUT is selected as the input source
2 when the sound effect is turned off
I DTS 96/24
3 when connecting the headphones
Be aware the following points when the DTS 96/24 signal is being
input.
4 when 6CH INPUT is selected as the input source
5 when over 96 kHz sampling digital signals are being input
• Select the subprogram “NORMAL” in “DOLBY DIGITAL/DTS
SURROUND” among CINEMA DSP programs in order to decode
the DTS 96/24 signals correctly.
• Press EX/ES while the DTS 96/24 signals are being input for
matrix 6.1 playback.
• DTS 96/24 decoder functions only for those two cases described
above. In other cases, necessary process such as sound effect
addition and down mixing is given depending on the sampling
frequency of the input signals.
/
96kHz 24bit
indicator lights up when the DTS 96/24 signal is input
to this unit.
E-49
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING
REC OUT/ZONE 2 allows you to record one source while viewing and/or listening to another source.
1
2
VOLUME
INPUT SELECTOR
INPUT MODE
STANDBY
/ON
6CH
SPEAKERS
SET MENU
TREBLE
NEXT
INPUT STEREO
PROGRAM
BALANCE
A
B
REC OUT/ZONE
SOURCE/REMOTE
2
EFFECT
BASS
D–TV/LD
DVD
CABLE
MD/TAPE
PROCESSOR BASS
DIRECT EXTENSION
SAT
CD–R
VCR
1
TUNER
VCR
VCR 3/DVR
VIDEO AUX
2
CD
ON
OFF
PHONO
L
R
SILENT
PHONES
VIDEO AUX
OPTICAL
S
VIDEO
VIDEO
L
AUDIO
R
Turn on the power to this unit and all connected
components.
Cautions
1
2
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR 1 IN is not
output on VCR 1 OUT.)
Select the source component you want to record
from by using REC OUT/ZONE 2.
• S-video and composite video signals pass independently through
this unit’s video circuits. Therefore, when recording or dubbing
video signals, if your video source component is connected to
provide only an S-video (or only a composite video) signal, you
can record only an S-video (or only a composite video) signal by
your VCR.
REC OUT/ZONE 2
SOURCE/REMOTE
D–TV/LD
DVD
CABLE
MD/TAPE
SAT
CD–R
TUNER
CD
VCR 1
VCR 2
VCR 3/DVR
PHONO
VIDEO AUX
• DIGITAL OUTPUT jacks and analog OUT (REC) jacks are
independent. Only digital signals are output from DIGITAL
OUTPUT jacks and analog signals from OUT (REC) jacks.
• A source connected to the 6CH INPUT jacks of this unit cannot
be recorded.
To record the current input source that you are watching or
listening to, set REC OUT/ZONE 2 to SOURCE/REMOTE.
To record the other source than the one that you are watching
or listening to, set REC OUT/ZONE 2 to the source you want
to record.
• The LD q RF (AC-3) input signal cannot be output using REC
OUT/ZONE 2.
• Check the copyright laws in your country to record from records,
CDs, radio, etc. Recording of copyrighted material may infringe
copyright laws.
Start playback (or select a broadcast station) on the
source component.
3
4
Start recording on the recording component.
Notes
• Do a test recording before you start an actual recording.
• It is not possible to record the sound effect created by this unit’s
DSP processing.
I Special considerations when recording DTS
software
The DTS signal is a digital bitstream. Attempting to digitally record
the DTS bitstream will result in noise being recorded. Therefore, if
you want to use this unit to record sources that have DTS signals
recorded on them, the following considerations and adjustments
need to be made. For LDs, DVDs and CDs encoded with DTS,
when your player is compatible with the DTS format, follow its
operation instruction to make a setting so that the analog signal will
be output from the player.
• When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
• Operating BASS and TREBLE, BASS EXTENSION, BAL-
ANCE, VOLUME, and DSP programs do not affect the recorded
signal.
• Setting REC OUT/ZONE 2 to SOURCE/REMOTE and using
the BGV function (see page 43) allows the recording of audio and
video from a different source.
• Use INPUT SELECTOR to switch the source from the one you
are watching or listening to while making recordings with REC
OUT/ZONE 2 set to the source component you are recording
from.
E-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operation
This section explains SET MENU setting, remote control features and the other
functions.
SET MENU ITEMS .............................................................................................. 52
Operating the SET MENU .......................................................................................... 53
1 SPEAKER SET........................................................................................................ 54
2 LOW FREQ. TEST .................................................................................................. 54
3 HP TONE CTRL (headphone tone control) ............................................................ 55
4 CENTER GEQ (center graphic equalizer)............................................................... 55
5 REAR CT GEQ (rear center graphic equalizer) ...................................................... 55
6 CINEMA EQ ........................................................................................................... 56
7 INPUT RENAME .................................................................................................... 57
8 I/O ASSIGNMENT.................................................................................................. 58
9 INPUT MODE (initial input mode) ......................................................................... 59
10 PARAMETER INI (parameter initialization) ........................................................ 59
11 LFE LEVEL ........................................................................................................... 59
12 DYNAMIC RANGE .............................................................................................. 60
13 SP DELAY ............................................................................................................. 60
14 AUDIO DELAY ..................................................................................................... 61
15 DISPLAY SET ....................................................................................................... 62
16 MEMORY GUARD ............................................................................................... 62
17 ZONE2 SET ........................................................................................................... 63
18 6CH INPUT SET ................................................................................................... 63
REMOTE CONTROL FEATURES ...................................................................... 64
Using the remote control............................................................................................. 64
Setting the manufacturer code .................................................................................... 66
Programming a new remote control function (Learn feature) .................................... 68
Each component control area ...................................................................................... 70
Using the Macro feature ............................................................................................. 75
Changing the source name in the display window...................................................... 78
Clearing a learned function or macro ......................................................................... 79
Clearing learned functions, macros, renamed source names, and setup manufacturer
codes ........................................................................................................................... 80
ADJUSTING THE LEVELS OF THE EFFECT SPEAKERS ............................... 81
SLEEP TIMER ..................................................................................................... 82
ZONE 2 ............................................................................................................... 83
Connections ................................................................................................................ 83
Remote control in ZONE 2 ......................................................................................... 84
E-51
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
The SET MENU consists of eighteen items including the Speaker Set, Center Graphic Equalizer and Parameter Initialization features.
Choose the appropriate item and adjust or select the values as necessary.
Notes
• You can adjust the items in the SET MENU while reproducing a source.
• We recommend that you adjust the items in the SET MENU while using a video monitor. It is easier to see the video monitor screen than it
is to see the front panel display on this unit while adjusting SET MENU items.
1 SPEAKER SET
1A CENTER SP
1B MAIN SP
Selects the output mode suitable for your center speaker.
Selects the output mode suitable for your main speakers.
Selects the output mode suitable for your rear speakers.
Selects the output mode suitable for your rear center speaker.
Selects the speakers for your LFE/BASS signal output.
1C REAR L/R SP
1D REAR CT SP
1E LFE/BASS OUT
1F FRONT EFCT SP Selects the output mode for your front effect speakers.
1G MAIN LEVEL Selects the output level for your main channels.
2 LOW FREQ.TEST
3 HP TONE CTRL
4 CENTER GEQ
5 REAR CT GEQ
6 CINEMA EQ
Matches the subwoofer level with the level of the other speakers.
Adjusts the tonal balance of the headphones.
Matches the center speaker tonal quality with the main speakers.
Matches the rear center speaker tonal quality with the rear speakers.
Adjusts the tonal balance of the main and center speakers, front effect speakers, rear speakers and rear center speaker
separately.
7 INPUT RENAME
8 I/O ASSIGNMENT
9 INPUT MODE
Changes the name of the inputs.
Assigns the I/O terminals to the designated input sources.
Selects the initial input mode of the sources.
10 PARAMETER INI
11 LFE LEVEL
Initializes the parameters of a group of DSP programs.
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
Adjusts the dynamic range for Dolby Digital signals.
12 DYNAMIC RANGE
13 SP DELAY
Adjusts the delay time for center and rear center speakers.
Adjusts the delay time for all channels.
14 AUDIO DELAY
15 DISPLAY SET
16 MEMORY GUARD
17 ZONE2 SET
Sets the background or position of on screen displays and changes the brightness of this unit’s front panel display.
Locks DSP program parameters and other SET MENU settings.
Selects the mode of Zone 2.
18 6CH INPUT SET
Sets the destination of the center channel and subwoofer channel signals that are input into the 6CH INPUT jacks.
E-52
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
Operating the SET MENU
10KEY DSP
HALL 1
HALL 2
CHURCH JAZZ CLUB
Adjustment should be performed with the remote control.
1
2
3
4
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
Notes
5
6
7
8
5
TV
MOVIE
MOVIE
/DTS
SUR.
EX/ES
THEATER THEATER
1
THEATER
2
• Some items require extra steps to change to the desired setting.
• NEXT and SET MENU +/– on the front panel can be also used.
9
10
0
11
12
CHP/INDEX
+10
+100
A/B/C/D/E PRESET
TV INPUT
CH
MUTE
TV VOL
VOLUME
STEREO
EFFECT
TV MUTE
DISC
2, 3, 5
1
PARAMETER
SET MENU
ON SCREEN LEVEL
SLEEP
TEST
3, 4
PUSH
Set PARAMETER/SET MENU to SET MENU.
1
PARAMETER
SET MENU
Press
/
repeatedly to select the item (1 to 18) you want to adjust.
2
3
SET MENU 1/5
≥
1
2
3
4
SPEAKER SET
LOW FREQ.TEST
HP TONE CTRL
CENTER GEQ
/
:
:
Up/Down
Enter
-/+
Press +/– once to enter the setup mode of the selected item.
The last setting you adjusted appears on the video monitor or on the front panel
1A CENTER SP
display. Depending on the item, press
/
to select a sub item.
“LRG SML NONE
Press +/– repeatedly to change the setting of the item.
4
5
Press
/
repeatedly until the current DSP program appears or simply
press one of the DSP program buttons to exit from the SET MENU.
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
3
4
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
6
7
8
TV
MOVIE
MOVIE
/DTS
SUR.
THEATER THEATER 1 THEATER 2
9
10
0
11
12
+10
+100
E-53
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
1 SPEAKER SET
Set the speaker mode depending on your speaker system. See “SPEAKER MODE SETTINGS” on pages 34 to 37 for details about the
setting items.
2 LOW FREQ. TEST
Use this feature to adjust the output level of the subwoofer so it matches that of the other speakers in your configuration.
Press +/– to set “TEST TONE” to “ON”.
1
2
LOW FREQ.TEST
Cautions
≥
TEST TONE………OFF
OUTPUT…MAIN L/R
FREQ.………………88Hz
• “ON” cannot be selected when the headphones are being used.
• Setting turns to “OFF” if the headphones are connected during testing.
• While the test tone is being output, the source sound cannot be output.
Adjust the volume with VOLUME +/– so you can hear the tone.
2
3
Cautions
• Do not turn up the volume too high.
• If no test tone is heard, turn down the volume, set this unit in the standby mode and
make sure all the necessary connections are correct.
Press to go to “OUTPUT” and press +/– to select the speaker you
want to compare with the subwoofer.
If “SWFR” is selected, the test tone above 90 Hz will not be output from the
subwoofer. The test tone will not necessarily be output from the selected speakers.
The output mode of the test tone depends on the settings of “1 SPEAKER SET” on
the SET MENU.
Press to go to “FREQ.” and press +/– to select the frequency you want
to use.
Set the center frequency (35 – 250 Hz or “35-250Hz”) to check that the subwoofer
4
5
level matches that of the other speakers.
Adjust the volume of the subwoofer with the controls on the subwoofer
so it matches that of the speaker you are comparing it to.
I About the test tone
Digital generator
(wide band noise produced)
• The test tone is produced by the tone generator.
The tone generator produces a narrow-band noise centered on a specified frequency by
the band pass filter.
• You can change this center frequency from 35 Hz through 250 Hz in one-sixth octave
steps.
Noise
• You can use the test tone not only for adjusting the subwoofer level, but also for
checking the low-frequency characteristics of your listening room. Low-frequency
sounds are especially affected by the listener’s position, speaker placement, subwoofer
polarity and other conditions.
FREQ.
Band pass filter
35 Hz – 250 Hz
Center freq.
E-54
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
3 HP TONE CTRL (headphone tone control)
Use this feature to adjust the level of the bass and treble when you use your headphones.
Control range (dB): –6 – +3 for both BASS and TRBL (treble)
Initial setting: 0 dB for both BASS and TRBL (treble)
3
HP TONE CTRL
≥
BASS
TRBL
|
|
Select “BASS” or “TRBL”.
1
2
-
+
0dB
Press +/– to change each level.
4 CENTER GEQ (center graphic equalizer)
Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right main
speakers.
Control range (dB): –6 – +6
4
CENTER GEQ
Initial setting:
0 dB for 5-band
≥
100Hz
300Hz
1kHz
|
|
|
|
|
Press to select a higher frequency and to select a lower frequency.
You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
1
2
3kHz
10kHz
-
+
Press +/– to adjust the level of that frequency.
0dB
Note
• You can monitor the center speaker sound while adjusting this item by using the test
tone. Press TEST before starting the foregoing procedure. “TEST DOLBY SUR.” (or
“TEST DSP”) appears on the video monitor, and the test tone starts alternating among
the speakers. Once you begin this procedure, the test tone remains at the center speaker
and you can hear how the sound changes as you adjust the various frequency levels. To
stop the test tone, press TEST (see pages 39 and 40).
5 REAR CT GEQ (rear center graphic equalizer)
Use this feature to adjust the built-in 5-band graphic equalizer so the rear center speaker tone matches that of the left and right rear speakers.
Control range (dB): –6 – +6
5
REAR CT GEQ
Initial setting:
0 dB for 5-band
≥
100Hz
300Hz
1kHz
|
|
|
|
|
Press to select a higher frequency and to select a lower frequency.
You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.
1
2
3kHz
10kHz
-
+
0dB
Press +/– to adjust the level of that frequency.
Note
• You can monitor the rear center speaker sound while adjusting this item by using the test
tone. Press TEST before starting the foregoing procedure. “TEST DOLBY SUR.” (or
“TEST DSP”) appears on the video monitor, and the test tone starts alternating among
the speakers. Once you begin this procedure, the test tone remains at the rear center
speaker and you can hear how the sound changes as you adjust the various frequency
levels. To stop the test tone, press TEST (see pages 39 and 40).
E-55
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
6 CINEMA EQ
Use this feature to match the tonal quality of four groups of speakers: the main and center speaker group, the front effect speakers group, the
rear speakers group, and the rear center speaker group. CINEMA-EQ consists of a high-shelving equalizer (HIGH) and a parametric
equalizer (PEQ). The high-shelving equalizer changes high frequency characteristics, and the parametric equalizer boosts or cuts any selected
frequency. The equalizer can be used for a variety of purposes, such as adjusting the tonal quality of differing types of speakers, adjusting the
tonal quality in different installation environments, or adjusting the source sound to your liking.
Press
to select “ON”.
/
repeatedly to select one of the speaker groups and press +/–
1
2
6
CINEMA EQ
≥
L,C,R…………………OFF
FRNT EFCT………OFF
REAR L/R…………OFF
REAR CT……………OFF
Press
be set.
/
several times to display the setting screen for the channel to
There are 4 groups (6A – 6D) to be set.
Caution
• If “OFF” is selected in step 1, the setting screen for that group will not be dis-
played.
Press
/
to select the item to be adjusted.
3
4
Select one item at each time from “FRQ”/”GAIN” for “HIGH” and “FRQ”/”GAIN”
for “PEQ”.
Adjust the value for the item by pressing +/–.
“FRQ” (frequency) for “HIGH” is to set the turn over frequency and “PEQ” for the
band central frequency. The amplification increases for higher “GAIN” value while
the attenuation increases for lower “GAIN” value.
Notes
• When any change has been made on the initial setting, (asterisk) will be placed in front
*
of its parameter name.
• CINEMA-EQ does not work when you press STEREO/EFFECT to turn off the effect.
• While “TEST DOLBY SUR.” or “TEST DSP” is being activated, the test tones are
output as described below.
1 6A L,C,R EQ: The test tones are output from the main L/R and center channels.
(When “1A CENTER SP” is set to “NONE”, the test tones are output from the
main L/R only.)
2 6B FRNT EFCT EQ: The test tones are output from the front effect channels.
3 6C REAR L/R EQ: The test tones are output from the rear L/R channels.
4 6D REAR CT EQ: The test tones are output from the rear center channels.
I 6A L, C, R EQ (main L/center/main R equalizer)
Use this feature to adjust the tonal quality of the main L/R and center channels.
Control range:
Initial setting:
1.0 kHz – 12.7 kHz (HIGH: FRQ, PEQ: FRQ),
6A L,C,R EQ
–9 dB – +6 dB (HIGH: GAIN, PEQ: GAIN)
12.7 kHz (HIGH: FRQ, PEQ: FRQ), –3 dB (HIGH: GAIN),
–4 dB (PEQ: GAIN)
≥
HIGH:FRQ…12.7kHz
GAIN………-3dB
PEQ :FRQ…12.7kHz
GAIN………-4dB
E-56
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
I 6B FRNT EFCT EQ (front effect equalizer)
Use this feature to adjust the tonal quality of the front effect channels.
Control range:
1.0 kHz – 12.7 kHz (HIGH: FRQ, PEQ: FRQ),
6B FRNT EFCT EQ
–9 dB – +6 dB (HIGH: GAIN, PEQ: GAIN)
12.7 kHz (HIGH: FRQ), 8.0 kHz (PEQ: FRQ),
0 dB (HIGH: GAIN), –3 dB (PEQ: GAIN)
Initial setting:
≥
HIGH:FRQ…12.7kHz
GAIN…………0dB
PEQ :FRQ……8.0kHz
GAIN………-3dB
I 6C REAR L/R EQ (rear L/R equalizer)
Use this feature to adjust the tonal quality of the rear L/R channels.
Control range:
1.0 kHz – 12.7 kHz (HIGH: FRQ, PEQ: FRQ),
–9 dB – +6 dB (HIGH: GAIN, PEQ: GAIN)
12.7 kHz (HIGH: FRQ), 8.0 kHz (PEQ: FRQ),
0 dB (HIGH: GAIN), –3 dB (PEQ: GAIN)
6C REAR L/R EQ
Initial setting:
≥
HIGH:FRQ…12.7kHz
GAIN…………0dB
PEQ :FRQ……8.0kHz
GAIN………-3dB
I 6D REAR CT EQ (rear center equalizer)
Use this feature to adjust the tonal quality of the rear center channel.
Control range:
1.0 kHz – 12.7 kHz (HIGH: FRQ, PEQ: FRQ),
–9 dB – +6 dB (HIGH: GAIN, PEQ: GAIN)
12.7 kHz (HIGH: FRQ), 8.0 kHz (PEQ: FRQ),
0 dB (HIGH: GAIN), –3 dB (PEQ: GAIN)
6D REAR CT EQ
Initial setting:
≥
HIGH:FRQ…12.7kHz
GAIN…………0dB
PEQ :FRQ……8.0kHz
GAIN………-3dB
7 INPUT RENAME
Use this feature to change the name of the input which appears on the OSD or the front panel display.
Select the input you want to change the name of by pressing an input
selector button.
1
2
3
7
INPUT RENAME
DVD -> DVD
^
Press +/– to place the “ ” under the space or the character you want to
^
edit.
-/+
/
:
:
Position
Character
Press
/
to select the character you want to use.
Press to change the character in the following order, or press to go in the reverse
order.
A – Z, a space, 0 – 9, a space, a – z, a space, #, *, +, and so on.
Press +/– to move to the next one.
4
5
Press +/– repeatedly to exit the INPUT RENAME mode.
E-57
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
8 I/O ASSIGNMENT
It is possible to assign jacks according to the component to be used if this unit’s COMPONENT VIDEO INPUT jack or DIGITAL INPUT/
OUTPUT jack settings (component names for jacks) differ from that component. This makes it possible to change the jack assignment and
effectively connect more component.
Once you assign, you can select that component with INPUT SELECTOR (the input selector buttons on the remote control).
Caution
• You cannot assign the same component for different jacks of each item (8A – 8D).
I 8A <1> to <4> COAXIAL INPUT jacks
Choices:
LD RF (<1> only), V-AUX, VCR3/DVR, VCR2, VCR1, SAT,
CABLE, D-TV/LD, DVD, MD/TAPE, CD-R, TUNER, CD,
PHONO
8A COAXIAL IN
≥
<1>…………
<2>…………
<3>…………
LD RF
CD
Initial settings:
<1> LD RF, <2> CD, <3> DVD, <4> CABLE
DVD
<4>………… CABLE
I 8B <5> and <6> OPTICAL OUTPUT jacks
Choices:
CD-R, TUNER, CD, PHONO, V-AUX, VCR3/DVR, VCR2,
VCR1, SAT, CABLE, D-TV/LD, DVD, MD/TAPE
<5> CD-R, <6> MD/TAPE
8B OPTICAL OUT
Initial settings:
≥
<5>…………
CD-R
<6>………… MD/TAPE
I 8C <7> to <12> OPTICAL INPUT jacks
Choices:
CD, PHONO, VCR3/DVR, VCR2, VCR1, SAT, CABLE, D-TV/
LD, DVD, MD/TAPE, CD-R, TUNER
8C OPTICAL IN
Initial settings:
<7> CD, <8> CD-R, <9> DVD, <10> D-TV/LD, <11> SAT,
<12> VCR3/DVR
≥
<7>…………
<8>…………
<9>…………
CD
CD-R
DVD
<10>……… D-TV/LD
<11>……… SAT
<12>……… VCR3/DVR
I 8D [A] to [C] COMPONENT VIDEO INPUT jacks
Choices:
DVD, V-AUX, VCR3/DVR, VCR2, VCR1, SAT, CABLE, D-TV/
LD
8D CMPNT-V INPUT
Initial settings:
[A] DVD, [B] D-TV/LD, [C] SAT
≥
[A]…………
[B]………… D-TV/LD
[C]………… SAT
DVD
E-58
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
9 INPUT MODE (initial input mode)
Use this feature to designate the input mode for sources connected to the COAXIAL (OPTICAL) IN jacks when you turn on this unit (see
page 44 for details about the input mode).
Choices:
Initial setting:
AUTO, LAST
AUTO
9
INPUT MODE
“AUTO LAST
AUTO: Select this to allow this unit to automatically detect the type of input signal and
select the appropriate input mode.
LAST: Select this to set this unit to automatically select the last input mode used for that
source.
-/+
/
:
:
Select
Exit
Caution
• Even if “LAST” is selected, the setting for EX/ES is not stored in memory.
10 PARAMETER INI (parameter initialization)
Use this feature to initialize the parameters for each DSP program within a DSP program group. When you initialize a DSP program group,
all of the parameter values within that group revert to their initial settings.
Press the corresponding numeric button for the DSP program that you want to initialize.
The asterisk (*) next to the program number means that the parameter values have been
changed.
10 PARAMETER INI
1
5
9
2
3
4
6
7
8
Cautions
10 11 12
• You cannot initialize the individual DSP programs within a group separately.
• The parameter values of the DSP programs do not change if you initialize a program
group that does not have the asterisk mark (*).
Press No. Key
• When “16 MEMORY GUARD” is set to “ON” (see page 62), you cannot initialize any
program groups.
• Once you initialize a DSP program group, you cannot automatically revert to the
previous parameter settings.
11 LFE LEVEL
Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a Dolby Digital or DTS signal. The
LFE signal carries the low-frequency special effect sound which is only added to certain scenes.
Control range (dB): –20 – 0 for both SPEAKER and HEADPHONE
11 LFE LEVEL
Initial setting:
0 dB for both SPEAKER and HEADPHONE
≥
SPEAKER……………0dB
HEADPHONE………0dB
Press
/
to select the item to be adjusted.
1
2
Press +/– to adjust the LFE level.
Note
• Adjust the LFE level according to the capacity of your subwoofer or headphones.
E-59
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
12 DYNAMIC RANGE
Use this feature to adjust the dynamic range. This setting is effective only when this unit decodes Dolby Digital signals.
Choices:
Initial setting:
MAX, STD, MIN
MAX (for both speakers and headphones)
12 DYNAMIC RANGE
≥
SP:“MAX STD MIN
HP:“MAX STD MIN
MAX: Select the “MAX” setting for feature films.
MAX
STD: Select the “STD” (Standard) setting for general use.
MIN: Select the “MIN” setting for listening to sources at
STD
MIN
Dialog level
extremely low volume levels.
MIN
STD
MAX
Input level
Caution
• Some types of the Dolby Digital software do not support “MIN” for the dynamic range.
If “MIN” is selected to play this type of software, the volume may be extremely
lowered. If this problem occurs, select “MAX” or “STD”.
13 SP DELAY
Use this feature to adjust the delay of the center and the rear center channel sounds. This feature works when there is sound output from the
center speakers, with a source like Dolby Digital or DTS, etc.
Ideally, the center speaker and the rear center speaker should be the same distance from
13 SP DELAY
the main listening position as the left and right main speakers. However, in most home
situations, the center speaker or the rear center speaker is placed in line with the main
speakers or the rear speakers. By delaying the sound from the center speaker and the rear
center speaker, the apparent distance from the center speaker and the rear center speaker
to the main listening position can be adjusted to make it seem the same as the distance
between the left and right main speaker, and the left and right rear speakers to the listening
position. Adjusting the delay time for the center speaker is especially important for giving
depth to the dialogue.
≥
UNIT……………meters
MAIN L/R……3.04m
CENTER…………3.04m
REAR L/R……3.04m
REAR CT………2.13m
Press
/
to select “UNIT”.
1
2
Center speaker image
Press +/– to select the unit to be used for setting.
Select one from “msec”, “meters”, and “feet”.
C
C
L
R
Notes
• Setting items change depending on the unit chosen.
• When “meters” or “feet” is selected, enter the distance from your listening position
to each speaker.
Press
/
to select the speaker for which the delay is adjusted.
3
4
Press +/– to set the delay.
Press + for higher value and – for lower value.
RL
RC
RC
RR
Rear center speaker image
E-60
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
I Setting by “msec”
Control range:
Initial settings:
0 – 5.0 ms (for center), 0 – 30.0 ms (for rear center)
0 ms (for center), 3.0 ms (for rear center)
13 SP DELAY
≥
UNIT…………………msec
CENTER………………0ms
REAR CT………3.0ms
I Setting by “meters”
Control range:
Initial settings:
0.15 – 30.48 m (for main L/R, center, rear L/R, rear center)
3.04 m (for main L/R, center, rear L/R), 2.13 m (for rear center)
13 SP DELAY
≥
UNIT……………meters
MAIN L/R……3.04m
CENTER…………3.04m
REAR L/R……3.04m
REAR CT………2.13m
I Setting by “feet”
Control range:
Initial settings:
0.5 – 100 ft (for main L/R, center, rear L/R, rear center)
10.0 ft (for main L/R, center, rear L/R), 7.0 ft (for rear center)
13 SP DELAY
≥
UNIT…………………feet
MAIN L/R…10.0ft
CENTER………10.0ft
REAR L/R…10.0ft
REAR CT………7.0ft
Caution
• No delay will be set if the same distance is set for the main L/R and center, or the rear L/
R and rear center with “meters” or “feet” selected.
14 AUDIO DELAY
Use this feature to adjust the delay time of all channel sounds, when this unit decodes DTS or Dolby Digital signals. Adjusting “AUDIO
DELAY” is especially important for matching the sounds to screen pictures.
Control range:
Initial setting:
0 – 160 ms
0 ms
14 AUDIO DELAY
0ms
Note
• This feature is effective when the Dolby Digital, DTS or PCM (with the sampling
frequency lower than 96 kHz) signal is being played. The set value can be used for either
format and applies to all channels.
E-61
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
15 DISPLAY SET
Use this feature to set the background and the location of the OSD, and the brightness of this unit’s front panel display.
I DIMMER
15 DISPLAY SET
You can adjust the brightness of the front panel display.
≥
DIMMER………………………0
OSD SHIFT………………0
BLUE BACK………AUTO
Control range:
Initial setting:
–4 – 0
0
I OSD SHIFT (OSD off-set position)
This setting is used to adjust the vertical position of the OSD.
Control range:
Initial setting:
+5 (downward) – –5 (upward)
0
Press + to lower the position of the OSD. Press – to raise the position of the OSD.
I BLUE BACK
This item sets the OSD background.
Choices:
Initial setting:
AUTO, OFF
AUTO
AUTO: Blue background is displayed when no video signal is being input.
OFF: Nothing is displayed when no video signal is being input.
Caution
• With “OFF” selected, no on-screen display is shown on the video monitor when no
video signal is being input.
16 MEMORY GUARD
Use this feature to prevent accidental changes to DSP program parameter values and other settings on this unit.
Initial setting: OFF
16 MEMORY GUARD
Select “ON” to protect the following features:
• DSP program parameters
“OFF
ON
• All SET MENU items except “16 MEMORY GUARD”
• Center, front effect, rear speakers, rear center, and subwoofer levels
• The on-screen display (OSD) mode
-/+
/
:
:
Select
Exit
Cautions
• When “16 MEMORY GUARD” is set to “ON”, you cannot select any other SET MENU
items.
• When “16 MEMORY GUARD” is set to “ON”, you cannot use the test tone.
E-62
Download from Www.Somanuals.com. All Manuals Search And Download.
SET MENU ITEMS
17 ZONE2 SET
Use this feature to change the volume control setting for audio output to ZONE 2 OUT.
Choices:
Initial setting:
VAR., FIX
FIX
17 ZONE2 SET
ZONE2 OUT………FIX
VAR.: To adjust the ZONE 2 OUT volume with VOLUME +/– on the remote control.
FIX: To fix the ZONE 2 OUT volume to the volume level of this unit.
18 6CH INPUT SET
Use this feature to set the direction of the signals input into the center and subwoofer channels when the source component is connected to
the 6CH INPUT jacks.
I 18A CENTER to (direction of the center channel signals)
This item sets the direction of the signals input into the CENTER jack.
Choices:
Initial setting:
CENTER, MAIN
CENTER
18A CENTER to
CENTER: The input signals are output from the center speaker.
MAIN: The input signals are directed to the main L/R speakers with same level.
“CENTER MAIN
I 18B SWFR to (direction of the signals input into the subwoofer)
This item sets the direction of the signals input into the SUBWOOFER jack.
Choices:
Initial setting:
SWFR, MAIN
SWFR
18B SWFR to
SWFR: The input signals are output from the subwoofer.
MAIN: The input signals are directed to the main L/R speakers with same level.
“SWFR MAIN
E-63
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
The remote control can operate not only the main unit but also other Yamaha and other manufactures’ audio and video components by using
the Learning function and other manufactures’ code settings. The Macro feature also improves the operability of this unit allowing you to
program a series of operations in sequence onto a single button.
Using the remote control
I Main unit control area
The main unit control area is the shaded area shown below. It is for
controlling this unit. You can use functions within this area no
matter which component control area is selected.
I Component control area
The component control area is the shaded area shown below. Each
component has different functions for operation buttons in the
component control area. The component, which was chosen by
pressing an input selector button, can be controlled and the display
window shows the corresponding name of the input.
MACRO
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
SYSTEM
POWER
STANDBY
V–AUX
TUNER
CD–R
PHONO
CD
MACRO
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
CABLE
SAT
MD/TAPE
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
Input selector
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
CABLE
SAT
MD/TAPE
CD–R
6CH INPUT
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
TITLE
ENTER
MENU
6CH INPUT
SOURCE
TITLE
ENTER
MENU
DISPLAY
SOUND
SELECT
SEARCH
CHAPTER
SOURCE
DISPLAY
SOUND
POWER
REC
STOP
PAUSE
PLAY
SELECT
SEARCH
CHAPTER
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
POWER
REC
STOP
PAUSE
PLAY
3
4
10KEY/DSP
(DSP is selected)
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
6
7
8
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
TV MOVIE MOVIE
THEATER THEATER 1 THEATER 2
/DTS
SUR.
3
4
EX/ES
10KEY/DSP
(10KEY is selected)
ROCK
ENTER–
CONCERT CONCERT
9
10
0
11
12
CONCERT TAINMENT
VIDEO 1
VIDEO 2
CHP/INDEX
+10
+100
5
6
7
8
TV MOVIE MOVIE
THEATER THEATER 1 THEATER 2
/DTS
SUR.
A/B/C/D/E PRESET
EX/ES
9
10
0
11
12
There are 14 component
TV INPUT
CH
MUTE
CHP/INDEX
+10
+100
TV VOL
VOLUME
control areas. You can setup
the manufacturer code and
program other remote control
functions in each area (Cannot
setup the manufacturer code in
the OPTN area). See pages 66
to 69.
A/B/C/D/E PRESET
STEREO
EFFECT
TV MUTE
TV INPUT
CH
MUTE
DISC
TV VOL
VOLUME
STEREO
EFFECT
TV MUTE
PARAMETER
SET MENU
ON SCREEN LEVEL
DISC
PUSH
SLEEP
TEST
PUSH
E-64
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
I Source select
You can control another component independently from the input you selected by pressing an input selector button.
Press SOURCE SELECT
/
to choose a component and set the remote control to be used for it.
SOURCE
SELECT
I About Zone2
When you make up a second audio-video room with this unit’s Zone2 system, you might want to use this remote control. Pressing SOURCE
SELECT selects Zone2 first. See page 84 for details.
SOURCE
Zone2
SELECT
I About OPTN
OPTN is an extra component control area to be programmed with other remote control functions. (You cannot setup the manufacturer code in
this area.) Pressing SOURCE SELECT selects OPTN first.
SOURCE
SELECT
OPTN
Caution
• You cannot set the manufacturer code in the OPTN area.
I Light up function
The buttons which are active and the display window light up for 10 seconds after pressing LIGHT.
10KEY DSP
HALL
1
1
HALL
2
2
CHURCH JAZZ CLUB
3
4
MACRO
OFF ON
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO
1
VIDEO
2
5
6
7
8
SYSTEM
POWER
TV
MOVIE
MOVIE
/DTS
SUR.
STANDBY
V–AUX
TUNER
PHONO
CD
EX/ES
THEATER THEATER
1
THEATER
2
9
10
0
11
12
CABLE
SAT
MD/TAPE
CD–R
CHP/INDEX
+10
+100
A/B/C/D/E PRESET
D–TV/LD
VCR
1
VCR
2
VCR3/DVR
DVD
TV INPUT
CH
MUTE
TV VOL
VOLUME
STEREO
EFFECT
TV MUTE
6CH INPUT
TITLE
DISC
PUSH
ENTER
PAUSE
SOURCE
Buttons that light up
DISPLAY
MENU
SOUND
SELECT
SEARCH
CHAPTER
POWER
REC
STOP
PLAY
10KEY DSP
HALL
1
1
HALL
2
2
CHURCH JAZZ CLUB
3
4
Only buttons that send the
signals light up in orange.
These buttons light up in red
regardless of input source
selection.
E-65
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
Setting the manufacturer code
You can control other components by setting a manufacturer code. A code can be set up in each component control area except for the OPTN
area. TheYamaha code is factory preset for TUNER, MD/TAPE, CD-R, CD and DVD.
Press POWER (or any other button) on the remote
control while pointing it at the component to check if
4
MACRO
OFF ON
2, 5
1
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
you have set up the code correctly.
If the component cannot be controlled by the remote control,
try entering another code for the same manufacturer.
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
CABLE
SAT
MD/TAPE
CD–R
Press LEARN again to exit from the setup mode.
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
5
LEARN
6CH INPUT
TITLE
ENTER
MENU
3
4
Cautions
SOURCE
DISPLAY
SEARCH
SOUND
• Supplied remote control does not store all the manufacturer codes
for commercially available AV components (including Yamaha AV
components). Therefore it may not work to operate your AV
component. If operation is not possible with any of the manufac-
turer codes, program the new remote control function with the
Learn feature (see pages 68 and 69) or use the remote control for
the component.
SELECT
CHAPTER
POWER
REC
STOP
PAUSE
PLAY
Select the source component you want to preset by
using the input selector buttons.
1
2
• Only one manufacturer code can be set for each input selector
button.
Press and hold LEARN for about 3 seconds by using
a ballpoint pen or similar object.
“SETUP” and the selected component name appear alternately
in the display window.
• If you have already programmed a remote control function for a
button, the function by learning or macro programming takes
priority over the setup manufacturer code’s function.
• “ERROR” appears in the display window under the following
circumstances:
LEARN
SETUP
1 when pressing more than one button at once
2 when MACRO ON/OFF, 10KEY/DSP or PARAMETER/
SET MENU is switched to another position
DVD
Cautions
• If you do not press any button within 30 seconds during step
3, the setup process is canceled. If this happens, start over
from step 2.
• Press LEARN for at least 3 seconds, otherwise the learning
process is started.
Press
manufacturer.
/
to select the name of your component’s
3
You will find the names of most worldwide audio-video
manufacturers in alphabetical order in the display window.
ENTER
E-66
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
I Changing the component category (Library)
Although a component category (Library) is preset for each input
selector button, you can change it. For example, “VCR” is preset in
V-AUX. If you want to operate your TV with V-AUX, you can
change Library to TV.
I Amplifier Library (L:AMP)
The code to operate this unit has been preset in the supplied remote
control. However you can change the code in Amplifier Library if
necessary.
Amplifier Library has the following three codes;
YPC: Code to operate this unit
DSP: Code to operate other Yamaha DSP amplifiers that cannot be
operated with the YPC code
No: Code to operate other manufacturers’ amplifier using this
unit’s remote control
Repeat steps 1 and 2 of the procedure in “Setting the
manufacturer code”.
1
Select a Library (component category) by using q/w.
2
There are 13 Libraries to set up a manufacturer code; L:AMP,
L:TV, L:CAB (CABLE), L:DBS, L:SAT, L:VCR, L:DVD,
L:LD, L:CD, L:CDR (CD-R), L:MD, L:TAP (TAPE), L:TUN
(TUNER).
I Factory setting for Library and manufacturer
Component category
Input area
V-AUX
(Library)
VCR
TUN
TV
Manufacturer
ENTER
—
TUNER
PHONO
CABLE
SAT
YAMAHA
—
Repeat steps 3 and 4 of the procedure in “Setting the
manufacturer code”.
3
CAB
SAT
—
—
MD/TAPE
CD-R
MD
YAMAHA
YAMAHA
YAMAHA
—
CDR
CD
CD
D-TV/LD
VCR1
TV
VCR
VCR
VCR
DVD
—
VCR2
—
VCR3/DVR
DVD
—
YAMAHA
E-67
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
Programming a new remote control function (Learn feature)
If you want to program functions not included in the basic operations covered by the manufacturer code, or a manufacturer code is not
available, the following procedure needs to be performed. The possible programming area is the same as a component control area, so the
buttons are programmable independently for each source component area.
Cautions
• If you do not press any button within 30 seconds during steps
5 and 6, the learning process is canceled. If this happens, start
over from step 4.
MACRO
OFF ON
4, 8
2
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
CABLE
SAT
MD/TAPE
CD–R
• Do not press and hold LEARN longer than 3 seconds.
Otherwise this unit enters the manufacturer code setting
mode.
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
6CH INPUT
TITLE
ENTER
MENU
Press the button for which you want to program the
new function.
“LEARN” is displayed.
5
6
SOURCE
DISPLAY
SEARCH
SOUND
SELECT
CHAPTER
Press and hold the button on the other remote
control that has the function you want to program
into this remote control until “OK” appears in the
display window.
POWER
REC
STOP
PAUSE
PLAY
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
3
4
1
ROCK
ENTER–
CONCERT CONCERT
V DEO 1 V DEO 2
CONCERT TA NMENT
Cautions
• “NG” appears in the display window when programming has
not been done correctly. In this case, start over from step 5.
Set 10KEY/DSP to 10KEY.
1
10KEY DSP
• When the memory is full, “FULL” appears in the display
window, and this remote control cannot acquire any more
functions. Clear unnecessary programmed functions to allow
the unit to acquire new functions.
Caution
Repeat steps 5 and 6 to program additional func-
tions.
7
8
• It is also possible to program in the control area of this unit
with 10KEY/DSP set to DSP. However, if you program
functions in this area, you cannot control this unit and select a
DSP program.
Press LEARN again to exit from the learning mode.
LEARN
Press an input selector button to select a source
component.
2
3
Cautions
Place this remote control and the other remote
control about 5 to 10 cm apart on a flat surface so
that their infrared transmitters are aimed at each
other.
• Learning may not be possible in the following cases:
1 when the batteries in the remote control for this unit or other
component are weak
2 when the distance between the two remote controls is too
much or too little
3 when the remote control infrared windows are not facing with
appropriate angle
4 when the remote control is exposed to the direct sunlight
5 when the function to be programmed is continuous or
uncommon
5 to 10 cm (2 to 4 inch)
• “ERROR” appears in the display window in the following
circumstances:
Press LEARN by using a ballpoint pen or similar
object.
“LEARN” and the selected component name appear alternately
4
1 when pressing more than one button at once
2 when MACRO ON/OFF is switched to another position
in the display window.
LEARN
LEARN
DVD
E-68
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
I Programmable buttons
The shaded area shown below shows the buttons can be used for
programming (Learn) for each component selected by the input
selector button.
MACRO
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
CABLE
SAT
MD/TAPE
CD–R
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
6CH INPUT
TITLE
ENTER
MENU
SOURCE
DISPLAY
SEARCH
SOUND
SELECT
CHAPTER
POWER
REC
STOP
PAUSE
PLAY
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
3
4
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
6
7
8
TV
MOVIE
MOVIE
/DTS
SUR.
EX/ES
THEATER THEATER
1
THEATER
2
9
10
0
11
12
CHP/INDEX
+10
+100
A/B/C/D/E PRESET
TV INPUT
CH
MUTE
TV VOL
VOLUME
STEREO
EFFECT
TV MUTE
DISC
E-69
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
Each component control area
The general operational buttons are shown for each area. Some of them may not function depending on the component you have. After
setting the manufacturer code, press an input selector button, or SOURCE SELECT
/
to select a component you want to control.
Caution
• “Yamaha” is factory-set in TUNER, CD, CD-R, MD, and DVD for their manufacturer code. It is necessary to change the manufacturer
code if you would like to use the other manufacturers’ component. For other components than the ones listed above, you need to change the
component category (Library) and then set the manufacturer code. See “Setting the manufacturer code” on pages 66 and 67 for details.
I Operating a tuner (TUNER area)
Operation example
MACRO
1 POWER
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
SYSTEM
POWER
2 Preset group A/B/C/D/E
3 Preset number 1 to 8
STANDBY
V–AUX
TUNER
PHONO
CD
CABLE
SAT
MD/TAPE
CD–
4 Preset group A through E from left
5 PRESET +/–
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
6CH INPUT
TITLE
ENTER
MENU
SOURCE
DISPLAY
SOUND
SELECT
SEARCH
CHAPTER
POWER
REC
STOP
PAUSE
PLAY
1
2
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
3
4
3
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
6
7
8
TV MOVIE MOVIE
THEATER THEATER 1 THEATER 2
/DTS
SUR.
EX/ES
9
10
0
11
12
4
5
CHP/INDEX
+10
+100
A/B/C/D/E PRESET
TV INPUT
CH
MUTE
TV VOL
VOLUME
STEREO
EFFECT
TV MUTE
DISC
E-70
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
I Operating a CD player/CD recorder (CD and CD-R areas)
Operation example
MACRO
OFF ON
1 DISPLAY
2 SEARCH
3 POWER
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
CABLE
SAT
MD/TAPE
CD–R
4 STOP
D–TV/LD
VCR 1
VCR 2 VCR3/D
DVD
5 INDEX
6CH INPUT
6 TV INPUT *
7 TV VOL +/– *
8 TV MUTE *
9 Skip
TITLE
ENTER
MENU
1
2
SOURCE
DISPLAY
SOUND
SELECT
SEARCH
CHAPTER
9
0 PLAY
POWER
REC
STOP
PAUSE
PLAY
3
4
0
q
q PAUSE
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
w Numeric buttons
e Clear
3
4
w
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
6
7
8
TV MOVIE MOVIE
THEATER THEATER 1 THEATER 2
/DTS
SUR.
r DISC +/– (disc skip)
EX/ES
9
10
0
11
12
e
r
5
6
CHP/INDEX
+10
+100
Note
A/B/C/D/E PRESET
• For a Yamaha CD player, if you press d or a once, it pauses. It
stops if pressed again.
TV INPUT
CH
MUTE
TV VOL
VOLUME
7
8
STEREO
EFFECT
TV MUTE
DISC
* TV VOL +/–, TV INPUT, and TV MUTE function to operate your TV
without switching the input if the manufacturer code is set in D-TV/LD or
PHONO.
I Operating an MD recorder (MD/TAPE area)
Operation example
MACRO
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
1 DISPLAY
2 SEARCH
3 POWER
4 REC
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
CABLE
SAT
MD/TAPE
CD–R
D–TV/LD
VCR 1
VCR VCR3/DVR
DVD
5 STOP
6CH INPUT
6 TV INPUT *
7 TV VOL +/– *
8 TV MUTE
9 Skip
TITLE
ENTER
MENU
1
2
SOURCE
DISPLAY
SOUND
SELECT
SEARCH
CHAPTER
9
0 PLAY
POWER
REC
STOP
PAUSE
PLAY
3
4
0
q
q PAUSE
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
w Numeric buttons
3
4
w
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
5
6
7
8
* TV VOL +/–, TV INPUT, and TV MUTE function to operate your TV
without switching the input if the manufacturer code is set in D-TV/LD or
PHONO.
TV MOVIE MOVIE
THEATER THEATER 1 THEATER 2
/DTS
SUR.
EX/ES
9
10
0
11
12
CHP/INDEX
+10
+100
6
7
8
A/B/C/D/E PRESET
TV INPUT
CH
MUTE
TV VOL
VOLUME
STEREO
EFFECT
TV MUTE
DISC
E-71
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
I Operating a DVD player (DVD area)
Operation example
MACRO
1 TITLE
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
2 MENU
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
3 DISPLAY
4 SEARCH
5 POWER
CABLE
SAT
MD/TAPE
CD–R
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
1
2
6CH INPU
6 Return
TITLE
ENTER
MENU
7 STOP
w
3
4
8 Title/Index
9 TV INPUT *
0 TV VOL +/– *
q TV MUTE *
w Menu cursor/ENTER
e Audio
SOURCE
DISPLAY
SOUND
e
r
SELECT
SEARCH
CHAPTER
POWER
REC
STOP
PAUSE
PLAY
5
6
t
y
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
3
4
u
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
7
5
6
7
8
TV MOVIE MOVIE
THEATER THEATER 1 THEATER 2
/DTS
SUR.
r Skip
EX/ES
9
10
0
11
12
i
o
8
9
CHP/INDEX
+10
+100
t PLAY
A/B/C/D/E PRESET
y PAUSE
TV INPUT
CH
MUTE
TV VOL
VOLUME
u Numeric buttons
i Clear
0
q
STEREO
EFFECT
TV MUTE
DISC
o DISC +/– (disc skip)
* TV VOL +/–, TV INPUT, and TV MUTE function to operate your TV
without switching the input if the manufacturer code is set in D-TV/LD or
PHONO.
I Operating an LD player (D-TV/LD area)
Operation example
MACRO
1 DISPLAY
2 SEARCH
3 POWER
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
CABLE
SAT
MD/TAPE
CD–R
4 STOP
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
5 Chapter/Time
6 TV INPUT *
7 TV VOL +/– *
8 TV MUTE *
9 SOUND
6CH INPUT
TITLE
ENTER
MENU
1
SOURCE
DISPLAY
SOUND
9
0
SELECT
SEARCH
CHAPTER
2
3
0 CHAPTER +/–
q PLAY
POWER
REC
STOP
PAUSE
PLAY
q
w
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
w PAUSE
3
4
e
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
e Numeric buttons
r Clear
4
5
6
7
8
TV MOVIE MOVIE
THEATER THEATER 1 THEATER 2
/DTS
SUR.
EX/ES
9
10
0
11
12
r
5
6
CHP/INDEX
+10
+100
* TV VOL +/–, TV INPUT, and TV MUTE function to operate your TV
without switching the input if the manufacturer code is set in D-TV/LD or
PHONO.
A/B/C/D/E PRESET
TV INPUT
CH
MUTE
TV VOL
VOLUME
7
8
STEREO
EFFECT
TV MUTE
DISC
E-72
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
I Operating a VCR (VCR 1, VCR 2 and VCR3/DVR areas)
Operation example
MACRO
OFF ON
1 SEARCH
2 POWER
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
3 REC (Press twice to start recording)
4 STOP
CABLE
SAT
MD/TA
CD–R
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
5 TV/Video input
6 TV INPUT *
6CH INPUT
TITLE
ENTER
MENU
7 TV VOL +/– *
8 TV MUTE *
SOURCE
DISPLAY
SOUND
9 PLAY
SELECT
SEARCH
CHAPTER
1
0 PAUSE
POWER
REC
STOP
PAUSE
PLAY
2
3
9
0
q Numeric buttons
w CH +/– (channel)
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
3
4
q
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
4
Note
5
6
7
8
TV MOVIE MOVIE
THEATER THEATER 1 THEATER 2
/DTS
SUR.
EX/ES
• If more than two manufacturer codes for your VCRs are set up in
any of the V-AUX, VCR 1, VCR 2 and VCR3/DVR respectively,
the only VCR whose manufacturer code is set up in the VCR 1
area can be operated in the other components’ operation mode.
9
10
0
11
12
5
6
CHP/INDEX
+10
+100
A/B/C/D/E PRESET
w
TV INPUT
CH
MUTE
TV VOL
VOLUME
7
8
STEREO
EFFECT
TV MUTE
* TVVOL +/–, TV INPUT, and TV MUTE function to operate your TV
without switching the input if the manufacturer code is set in D-TV/LD or
PHONO.
DISC
I Operating a TV/digital TV (D-TV/LD area)
Operation example
MACRO
1 DISPLAY
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
SYSTEM
POWER
2 SEARCH *
3 POWER
STANDBY
V–AUX
TUNER
PHONO
CD
CABLE
SAT
MD/TAPE
CD–R
4 REC (Press twice to start recording) *
5 STOP *
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
6CH INPUT
6 Enter
TITLE
ENTER
MENU
7 TV INPUT
1
2
SOURCE
8 TV VOL +/–
9 TV MUTE
DISPLAY
SOUND
SELECT
SEARCH
CHAPTER
0 PLAY *
POWER
REC
STOP
PAUSE
PLAY
3
4
0
q
q PAUSE *
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
w Numeric buttons
e CH +/– (channel)
3
4
w
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
5
6
7
8
TV MOVIE MOVIE
THEATER THEATER 1 THEATER 2
/DTS
SUR.
EX/ES
Note
9
10
0
11
12
6
7
CHP/INDEX
+10
+100
• If two manufacturer codes for your TVs are set up in PHONO and
D-TV/LD, the only TV whose manufacturer code is set up in the
D-TV/LD area can be operated in the other components’ operation
mode.
A/B/C/D/E PRESET
e
TV INPUT
CH
MUTE
TV VOL
VOLUME
8
9
STEREO
EFFECT
TV MUTE
DISC
* SEARCH, REC, STOP, PAUSE and PLAY function to operate your
VCR without switching the input to VCR 1 if the manufacturer code is set
in VCR 1.
E-73
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
I Operating a cable or satellite TV tuner (CABLE and SAT areas)
Operation example
MACRO
1 MENU
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
2 DISPLAY
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
3 POWER
CABLE
SAT
MD/TAPE
CD–R
4 Enter
D–TV/
VCR
VCR 2 VCR3/DVR
DVD
5 TV INPUT *
6 TV VOL +/– *
7 TV MUTE *
8 Menu cursor/ENTER
9 Numeric buttons
0 Recall
6CH INPUT
TITLE
ENTER
MENU
1
2
8
9
SOURCE
DISPLAY
SOUND
SELECT
SEARCH
CHAPTER
POWER
REC
STOP
PAUSE
PLAY
3
q CH +/– (channel)
10KEY DSP
HALL 1
1
HALL 2
2
CHURCH JAZZ CLUB
3
4
* TV VOL +/–, TV INPUT, and TV MUTE function to operate your TV
without switching the input if the manufacturer code is set in D-TV/LD or
PHONO.
ROCK
ENTER–
CONCERT CONCERT
CONCERT TAINMENT
VIDEO 1
VIDEO 2
5
6
7
8
TV MOVIE MOVIE
THEATER THEATER 1 THEATER 2
/DTS
SUR.
EX/ES
9
10
0
11
12
4
5
CHP/INDEX
+10
+100
0
q
A/B/C/D/E PRESET
TV INPUT
CH
MUTE
TV VOL
VOLUME
6
7
STEREO
EFFECT
TV MUTE
DISC
E-74
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
Using the Macro feature
The Macro feature makes it possible to perform a series of operations by pressing just one button. For example, when you want to play a CD,
normally you would turn on the components, select the CD input, and press the play button to start playback. The Macro feature lets you
perform all those operations by simply pressing the CD macro button. The macro buttons (the input selector buttons, SYSTEM POWER and
STANDBY) are factory set with macro programs. You can also program your own macros (see pages 76 and 77).
Macro buttons
First
Second
Third
SYSTEM POWER
This unit turns on. (The components
connected to this unit turn on.) *1
TV turns on. (the TV whose manufac-
turer code is set up in the D-TV/LD
area) *2
—
STANDBY
V-AUX
TUNER
PHONO
CABLE
SAT
This unit enters the standby mode.
—
—
This unit turns on. (The components
connected to this unit turn on.) *1
Input source is selected. (V-AUX)
Input source is selected. (TUNER) *4
Input source is selected. (PHONO)
Input source is selected. (CABLE)
Input source is selected. (SAT)
Input source is selected. (MD/TAPE)
Input source is selected. (CD-R)
Input source is selected. (CD)
—
—
—
—
—
MD/TAPE
CD-R
Playback of MD/TAPE starts. *3
Playback of CD-R starts. *3
Playback of CD starts. *3
—
CD
D-TV/LD
VCR1
Input source is selected. (D-TV/LD)
Input source is selected. (VCR1)
Input source is selected. (VCR2)
Input source is selected. (VCR3/DVR)
Input source is selected. (DVD)
Playback of VCR 1 starts.
Playback of VCR 2 starts. *3
Playback of VCR3/DVR starts. *3
Playback of DVD starts. *3
VCR2
VCR3/DVR
DVD
*1 In order to turn on some components (including YAMAHA components) connected to this unit, connect those components to the AC
OUTLET(S) on the rear panel. (Power control may not be synchronized with this unit depending on the component. For details, please
refer to the operation instruction for the connected component.)
*2 If the macro you select includes power control functions, the component may be turned off if it is already on when you press the macro
button. For example, if your TV is on and you press the SYSTEM POWER macro button, the TV is turned off.
*3 Playback can be started with any YAMAHA remote control-compatible MD recorders, CD players, CD recorders and DVD players. When
using macros to operate other components, it is either necessary to program PLAY on the control area of that component (see pages 68
and 69) or to set up a manufacturer code (see page 66).
*4 When TUNER is selected as the input source, this unit receives the last station when this unit is set in the standby mode.
E-75
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
I Operating the macro
I Programming a macro
You can program your own macros and use the Macro feature to
transmit many remote control commands by pressing a single
button.
MACRO
OFF ON
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
1
2
SYSTEM
POWER
STANDBY
V–AUX
TUNER
CD–R
PHONO
CD
CABLE
SAT
MD/TAPE
1, 4
MACRO
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
6CH INPUT
CABLE
SAT
MD/TAPE
CD–R
2
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
Set MACRO ON/OFF to ON.
1
2
6CH INPUT
MACRO
OFF ON
Cautions
• The factory-set macro is not cleared when a new macro is
programmed for a button. The factory-set macro can be used again
when the programmed macro is cleared.
Press a macro button.
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
• It is not possible to add a new signal (macro step) to the factory-
set macro. Programming a macro changes all macro contents.
CABLE
SAT
MD/TAPE
CD–R
CD
• A macro programming is used to transmit learning or setup (or
YAMAHA preset) button signals of this remote control to a macro
button. If necessary, set up the manufacturer code or program a
function with the remote control for your component.
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
Cautions
• This remote control handles button signals that operate continu-
ously, such as volume control, as short time interval codes. Macro
programming that include these types of macro steps are therefore
not recommended.
• When you have finished using the Macro feature, set MACRO
ON/OFF to OFF.
• While this unit is carrying out a macro program, this unit does not
receive any other button’s function until the macro operation has
been completed (the TRANSMIT indicator stops flashing).
• Continue to aim the remote control at the component the macro is
operating until the macro operation has been completed.
Press MACRO by using a ballpoint pen or similar
object.
1
“MCR ?” appears in the display window.
MACRO
MCR ?
Caution
• If you do not press any button within 30 seconds during steps
2 and 3, the macro programming process is canceled. If this
happens, start over from step 1.
Press a macro button for which you want to program
the macro operation.
2
The button you chose for programming the macro operation
and the selected component name appear alternately in the
display window.
Example: Programming a macro for DVD
“M:DVD” and “DVD” appear alternately.
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
M:DVD
DVD
CABLE
SAT
MD/TAPE
CD–R
CD
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
E-76
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
Cautions
• “AGAIN” appears in the display window when a button other
than the macro buttons is pressed.
• If you want to change the source component, use SOURCE
SELECT
/
or input selector buttons. When you use the
input selector buttons, selecting the input is programmed as a
macro step, whereas SOURCE SELECT
/
only changes
the component.
Press the buttons of the functions that you want to
include in the macro operation sequence in order.
You can set up to 10 steps (10 functions). After you have set 10
steps, “FULL” appears and the remote control automatically
exits from the macro mode.
3
Example: Programming a macro for DVD
If the button that you want to program as the first macro step is
pressed, “MCR 1” appears. In a few seconds, “M:DVD” and
“DVD” appear and you can program the next button.
Caution
• “NG” appears in the display window when programming has
not been done correctly. In this case, start over from step 2.
Press MACRO again when the operation sequence
you want to program is complete.
4
MACRO
Caution
• “ERROR” appears in the display window under the following
circumstances:
1 when pressing more than one button at once
2 when MACRO ON/OFF is switched to another position
E-77
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
Changing the source name in the display window
You can change the name that appears in the display window on the remote control if you want to use the different name from the original
input selector button names. This is useful when different component is set in the input selector button.
Press q/w to move the cursor to the next position.
4
2, 5
MACRO
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
SYSTEM
POWER
STANDBY
V–AUX
TUNER
PHONO
CD
ENTER
CABLE
SAT
MD/TAPE
CD–R
1
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
6CH INPUT
Repeat steps 3 and 4 if necessary. Up to five characters can be
entered at maximum.
TITLE
ENTER
MENU
3
4
SOURCE
Note
DISPLAY
SEARCH
SOUND
SELECT
CHAPTER
• If you continuously want to rename another source compo-
nent, press ENTER and repeat steps 1, 3 and 4.
POWER
REC
STOP
PAUSE
PLAY
Press RE-NAME again to exit from the renaming
mode.
5
Press an input selector button to select the source
component you want to rename.
1
RE–NAME
V–AUX
TUNER
PHONO
CABLE
SAT
MD/TAPE
CD–R
CD
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
Press RE-NAME by using a ballpoint pen or similar
object.
The cursor flashes on the left end.
2
3
RE–NAME
_DVD
Cursor
Press
/
to select and enter a character.
You can use any of capital and lower case letters of the
alphabet (A – Z and a – z), numbers (0 – 9), /(slash) and -
(hyphen).
ENTER
E-78
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
Clearing a learned function or macro
I To clear a learned function
I To clear the macro function
Press an input selector button to select the source
component you want to clear the function.
Press an input selector button to select the source
component for which you want to clear the function.
1
1
2
Press LEARN by using a ballpoint pen or similar
object.
Press MACRO to clear a programmed macro by using
a ballpoint pen or similar object.
2
“LEARN” and the selected component name appear alternately
in the display window.
MACRO
MCR ?
LEARN
LEARN
Caution
• If you do not press any button within 30 seconds after step 2,
the clearing process is canceled. If this happens, start over
from step 2.
DVD
Press and hold CLEAR by using a ballpoint pen or
similar object, and at the same time press the button
for which you want to clear the macro for about
3 seconds.
3
Caution
• If you do not press any button within 30 seconds after step 2,
the clearing process is canceled. If this happens, start over
from step 2.
“C:OK” appears in the display window.
Press the button that you want to clear for 3 seconds
as pressing CLEAR by using a ballpoint pen or
similar object.
CLEAR
3
C:OK
“C:OK” appears in the display window.
Caution
CLEAR
• “C:NG” appears in the display window if the operation is
unsuccessful. In this case, try step 3 again.
C:OK
Note
Caution
• You can clear other macros at this time by holding down
CLEAR again and pressing the other buttons for which those
macros have been programmed.
• “C:NG” appears in the display window if the operation is
unsuccessful. In this case, try step 3 again.
Note
Press MACRO again to exit from the clearing mode.
Once you have cleared a macro for a button, the button reverts
to the factory setting.
4
• You can clear other learned functions at this time by holding
down CLEAR again and pressing the other buttons for which
those learned functions have been programmed.
MACRO
Press LEARN again to exit from the clearing mode.
Once you have cleared a learned function for a button, the
4
button reverts to the factory setting.
LEARN
E-79
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL FEATURES
Clearing learned functions, macros, renamed source names, and setup
manufacturer codes
You can reset the remote control to its factory setting by clearing the changed Libraries, programmed macros, set manufacturer codes and
learned functions.
Press and hold CLEAR again for about 3 seconds.
“C:OK” appears in the display window.
3
1, 3, 4
MACRO
TRANSMIT
RE–NAME
CLEAR LEARN MACRO
OFF ON
SYSTEM
POWER
CLEAR
STANDBY
V–AUX
TUNER
PHONO
CD
C:OK
CABLE
SAT
MD/TAPE
CD–R
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
Caution
6CH INPUT
• “C:NG” appears in the display window if the operation is
TITLE
ENTER
MENU
unsuccessful. In this case, start over from step 2.
2
Press CLEAR to exit from the clearing mode.
Once you have cleared a learned function or macro for a
button, the button reverts to the factory setting.
SOURCE
4
DISPLAY
SEARCH
SOUND
SELECT
CHAPTER
POWER
REC
STOP
PAUSE
PLAY
CLEAR
Press CLEAR by using a ballpoint pen or similar
object.
1
2
Caution
• “ERROR” appears in the display window under the following
circumstances:
CLEAR
CLEAR
1 when pressing a button other than the cursor and ENTER
2 when pressing more than one button at once
3 when MACRO ON/OFF, 10KEY/DSP or PARAMETER/
SET MENU is switched to another position
Caution
• If you do not press any button within 30 seconds after step 1,
the clearing process is canceled. If this happen, start over
from step 1.
Press
/
to select the clear mode.
ENTER
There are six clearing modes as shown below.
L:(name of a component) :
Clears all learned functions for the component area.
Press the input selector button to select the compo-
nent.
L:AMP : Clears all learned functions for this unit control
area.
L:ALL : Clears all learned functions.
M:ALL : Clears all programmed macros.
RNAME :Clears all renamed source names in the display
window.
FCTRY : Clears all programmed functions including setup
manufacturer codes. This returns to the factory
settings.
E-80
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE LEVELS OF THE EFFECT SPEAKERS
You can adjust the volume level of each effect speaker (center, right rear, rear center, left rear, front effect, and subwoofer) while listening to
a music source.
Press +/– to adjust the speaker output level.
• The control range for the center, left and right rear or rear
center speakers is from +10 dB to –10 dB.
3
PARAMETER
ON SCREEN LEVEL
1
SET MENU
2
SLEEP
TEST
• The control range for the subwoofer is from –20 dB to 0 dB.
3
PUSH
Cautions
• When you adjust the output level with LEVEL, the settings you
made with the test tone will be changed.
Set PARAMETER/SET MENU to PARAMETER.
1
2
• When PARAMETER/SET MENU is set to SET MENU, you
cannot adjust the output level by using LEVEL. However, each
time you press LEVEL, the current level of each speaker appears
on the front panel display and you can check the speaker level.
PARAMETER
SET MENU
• When the speaker output modes for “1A CENTER SP”, “1C
REAR L/R SP”, “1D REAR CT SP” and “1F FRONT EFCT SP”
are set to “NONE”, and “1E LFE/BASS OUT” to “MAIN”, the
output level of those speakers cannot be adjusted because there is
no sound coming from these speakers.
Press LEVEL to select the speaker(s) you want to
adjust.
Each time you press this button the selected speaker changes
and appears in the front panel display only as follows:
LEVEL
Center speaker output level
CENTER
R SUR.
0dB
0dB
Right rear speaker output level
Rear center speaker output level
Left rear speaker output level
REAR CT 0dB
L SUR.
FRONT
SWFR
0dB
0dB
0dB
Front effect speakers output level
Subwoofer output level
Note
• Once you press LEVEL, you can also select the speaker(s) to
be adjusted by pressing / .
E-81
Download from Www.Somanuals.com. All Manuals Search And Download.
SLEEP TIMER
Use this feature to automatically set this unit in the standby mode after the amount of time you have set. The sleep timer is useful when you
are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off the external components
connected to AC OUTLET(S).
I Canceling the sleep timer
Press SLEEP repeatedly until “SLEEP OFF” appears on the front
PARAMETER
ON SCREEN LEVEL
SET MENU
panel display.
SLEEP
TEST
2
After a few seconds, “SLEEP OFF” disappears, the “SLEEP”
indicator goes off and the display returns to the previous indication.
PUSH
Note
• The sleep timer setting can also be canceled by setting this unit in
the standby mode by using STANDBY on the remote control (or
STANDBY/ON on the front panel) or by disconnecting the AC
power cord from the AC outlet.
I Setting the sleep timer
Select a source and start playback on the source
component.
1
Press SLEEP repeatedly to set the amount of time.
Each time you press SLEEP, the front panel display changes as
2
shown below.
SLEEP
SLEEP 120min.
SLEEP 90min.
SLEEP 60min.
SLEEP 30min.
SLEEP
OFF
The “SLEEP” indicator soon lights up on the front panel display
after the sleep timer has been set. The display then returns to the
previous indication.
VOLUME
D–TV/LD
CABLE
SAT
DVD
MD/TAPE
CD–R
TUNER
CD
SLEEP
120min.
RL RC RR
LFE
VCR
VCR
1
2
L
C
R
DSP
VCR3/DVR
V–AUX
PHONO
SLEEP
SP
A
SLEEP indicator
E-82
Download from Www.Somanuals.com. All Manuals Search And Download.
ZONE 2
You can make up a multi-room audio-video system with this unit. With this feature, you can set this unit to reproduce separate input sources
in the main room and second (Zone 2) room using the supplied remote control in the second room.
ONLY ANALOG SIGNALS ARE SENT TO THE SECOND ROOM. FOR ANY SOURCEYOU WISH TO LISTEN TO IN THE
SECOND ROOM,YOU MUST CONNECT THE ANALOG OUTPUT FROM THE SOURCE TO THE CORRESPONDING ANA-
LOG INPUT ON THIS UNIT.
Connections
To use the multi-room functions of this unit, you need the following additional equipment:
• An infrared signal receiver in the second room
• An infrared emitter in the main room
This emitter transmits the infrared signals from the remote control in the second room to the main room (for example, to a CD player or LD
player).
• An amplifier and speakers for the second room
• A video monitor for the second room
Cautions
• Since there are so many ways to connect and use this unit in a
multi-room installation, we recommend that you consult with a
REMOTE 1
OUT
IN
OUT
IN
OUT
custom installation specialist for the Zone 2 connections which
will best meet your requirements.
This unit
• Some Yamaha models are able to connect directly to the RE-
MOTE 1 OUT jacks of this unit. If you own these products, you
may not need to use an infrared emitter. Up to six Yamaha
components can be connected as shown.
I A sample of system configuration and connections
VIDEO SIGNAL ZONE 2 OUT
AUDIO SIGNAL ZONE 2 OUT
Main room
Second room
Amplifier
Video monitor
DVD Player
(or other component)
This unit
Remote control
(in the Zone 2 mode)
Infrared emitter
Infrared signal receiver
REMOTE 1 OUT
REMOTE 1 IN
I Special considerations when using DTS software
The DTS signal is a digital bitstream. Therefore, if you attempt to send the DTS signal to Zone 2, you will only be able to hear the digital
noise that could damage your loudspeakers.
Due to this characteristic of DTS encoded discs, the following considerations and adjustments need to be made.
For DTS encoded LDs or DVDs
Only 2-channel audio signals may be sent to Zone 2. Set your Laser Disc/DVD player’s left and right outputs to the analog sound track.
For DTS encoded compact discs
DO NOT USE the Zone 2 feature with DTS encoded compact discs.
E-83
Download from Www.Somanuals.com. All Manuals Search And Download.
ZONE 2
Remote control in ZONE 2
In the second (Zone 2) room, the supplied remote control can be used as the Zone 2 remote control. You can select the input source and
control the component which is located in the main room directly from the second room regardless of the listening condition in the main
room.
Press SOURCE SELECT to display “Zone2” in the display window.
1
SOURCE
Zone2
SELECT
Use the input selector buttons to select the input source you want to listen to.
The display window shows “2: name of selected input” if the remote control is in the Zone 2 mode.
2
Example: When DVD is selected
V–AUX
TUNER
PHONO
CD
CABLE
SAT
MD/TAPE
CD–R
2:DVD
D–TV/LD
VCR 1
VCR 2 VCR3/DVR
DVD
You can control the component using the component control area buttons.
3
Note
• VOLUME +/– can be used to adjust the volume if you set the SET MENU item “17 ZONE2 SET”, “ZONE2 OUT” to “VAR.” (see page
63).
E-84
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound field programs
This section explains the sound field programs and its parameters.
DIGITAL SOUND FIELD PROCESSING (DSP) ................................................. 86
Understanding sound fields......................................................................................... 86
Recreating a sound field.............................................................................................. 87
Illustration of the virtual sound sources and echo patterns ......................................... 87
HI-FI DSP-SOUND FIELD PROGRAM ............................................................... 88
Programs and features ................................................................................................. 88
CONCERT HALL 1 ................................................................................................... 89
CONCERT HALL 2 ................................................................................................... 89
CHURCH .................................................................................................................... 89
JAZZ CLUB ................................................................................................................ 89
ROCK CONCERT ...................................................................................................... 89
ENTERTAINMENT ................................................................................................... 89
CINEMA-DSP SOUND FIELD PROGRAM......................................................... 90
The sound design of CINEMA-DSP sound field programs........................................ 90
Sound field images of the CINEMA-DSP programs .................................................. 90
Programs and features ................................................................................................. 91
MOVIE THEATER programs ..................................................................................... 93
ENTERTAINMENT ................................................................................................... 94
CONCERT VIDEO 1 .................................................................................................. 94
CONCERT VIDEO 2 .................................................................................................. 94
TV THEATER ............................................................................................................ 94
MOVIE THEATER 1 .................................................................................................. 94
MOVIE THEATER 2 .................................................................................................. 94
DOLBY DIGITAL/DTS SURROUND ...................................................................... 94
SOUND FIELD PROGRAM PARAMETER EDITING ......................................... 95
Changing parameter settings ....................................................................................... 95
DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS.................................. 96
E-85
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL SOUND FIELD PROCESSING (DSP)
Understanding sound fields
A sound field is defined as the “characteristic sound reflections of a particular space”. In
concert halls and other music venues, we hear early reflections and reverberations as well
as the direct sound produced by the artist(s). The variations in the early reflections and
other reverberations among the different music venues is what gives each venue its special
and recognizable sound quality.
Yamaha sent teams of sound engineers all around the world to measure the sound
reflections of famous concert halls and music venues, and collect detailed sound field
information such as the direction, strength, range, and delay time of those reflections.
Then we stored this enormous amount of data in the ROM chips of this unit.
I Early reflections
Reflected sounds reach our ears extremely rapidly (50 ms – 80 ms after the direct sound), after reflecting from one surface only — for
example, from the ceiling or a wall. These reflections provide vital information to our ears. Early reflections actually add clarity to the direct
sound.
I Reverberations
These are caused by reflections from more than one surface — walls, ceiling, the back of the room — so numerous that they merge together
to form a continuous sonic “afterglow”. They are non-directional, and lessen the clarity of the direct sound.
Reflected sounds image
E-86
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL SOUND FIELD PROCESSING (DSP)
Recreating a sound field
Recreating the sound field of a concert hall or an opera house requires localizing the
virtual sound sources in your listening room. The traditional stereo system that uses only
two speakers is not capable of recreating a realistic sound field. Yamaha’s DSP requires
four effect speakers to recreate sound fields based on the measured sound field data. The
processor controls the strength and delay time of the signals output from the four effect
speakers to localize the virtual sound sources in a full circle around the listener.
The DSP sound field programs can be classified in two types based on the sound field
processing method: programs that use early reflections only and programs that use both
early reflections and reverberation.
Illustration of the virtual sound sources and echo patterns
The virtual sound sources and echo patterns for the DSP sound field programs are shown below. The illustration of the virtual sound sources
shows early reflection sound only and the illustration of the echo patterns shows both reflected sound and reverberation.
I Virtual sound sources
The center of these circles represent the
virtual sound source.
The size of the circle indicates the strength of
the virtual sound source.
The direct sound source
The listening position
I Echo patterns
Direct sound source
Early reflections
50 – 80 msec
Reverberation
E-87
Download from Www.Somanuals.com. All Manuals Search And Download.
HI-FI DSP-SOUND FIELD PROGRAM
Programs and features
• These programs are the most suitable for the stereo music sources such as CDs.
• Sound field is created using four effect speakers (front L, front R, rear L and rear R) in addition to the main speakers.
• When “8ch Stereo” is selected, input signals are output from the all speakers that have been set on the SET MENU.
• Appropriate decoders automatically turn on depending on the input signals.
No.
Program
Europe Hall A
Features
1
CONCERT HALL 1
A large fan-shaped concert hall
Europe Hall B
Europe Hall C
U.S.A. Hall D
A large shoe-box type concert hall that has a solid, powerful sound
A classic shoe-box type concert hall that creates complex reflections for a full, rich sound
2
CONCERT HALL 2
A large concert hall where the middle and high frequencies are richly and beautifully
reinforced
Europe Hall E
Live Concert
Tokyo
A large classic shoe-box type concert hall that produces rich sounds
Near the center of a large round concert hall, where rich surround effect is produced
An ordinary church with moderate reverberations
A church with a high ceiling that has the long reverberation delay
The refectory (dining hall) of a beautiful medieval Gothic monastery
A famous New York jazz club that has with a spacious floor
A traditional jazz club in New York
3
4
5
6
CHURCH
Freiburg
Royaumont
Village Gate
Village Vanguard
The Bottom Line
Roxy Theatre
Warehouse Loft
Arena
JAZZ CLUB
A famous New York jazz club “The Bottom Line”
LA’s “hottest” rock club
ROCK CONCERT
ENTERTAINMENT
A concrete-built warehouse
A classic shoe-box type concert hall that creates the spacious feel of a large arena
High-energy, “hot” disco
Disco
Party
For background music at home parties
8ch Stereo
Caution
• The sound field programs for this unit are designed based upon the detailed information that Yamaha sound engineers have collected by
measuring the sound effect characteristics at the actual concert halls and music venues all over the world. Therefore you may find some
difference in reverberation and volume of the sounds that are output from each of your speakers.
E-88
Download from Www.Somanuals.com. All Manuals Search And Download.
HI-FI DSP-SOUND FIELD PROGRAM
CONCERT HALL 1
I Europe Hall A
I Europe Hall B
I Europe Hall C
This is a large fan-shaped concert hall in
Munich which has approximately 2500
seats. Almost the whole interior is made of
wood. There is relatively little reflection
from the walls, and sound spreads finely
and beautifully.
This is a large shoe-box type concert hall
with less than 2400 seats located in
Frankfurt. This hall has a very solid,
powerful sound. The listener’s virtual seat
is in the center-right section on the first
floor.
A classic shoe-box type concert hall with
approximately 1700 seats. Pillars and
ornate carvings create extremely complex
reflections which produce a very full, rich
sound.
CONCERT HALL 2
I U.S.A. Hall D
I Europe Hall E
This is a large 2200 seat shoe-box type
concert hall in Amsterdam. It has a circular
stage with seats located behind the stage.
I Live Concert
This is a large 2600 seat concert hall in the
United States which features a fairly
traditional European design. The interior is
relatively simple, in the American style.
The middle and high frequencies are richly
and beautifully reinforced.
A large round concert hall with a rich
surround effect. Pronounced reflections
from all directions emphasize the extension
of sounds. The sound field has a great deal
of presence, and your virtual seat is near the
center, close to the stage.
CHURCH
I Tokyo
I Freiburg
I Royaumont
The acoustic environment of an ordinary
church with moderate reverberations. The
reverberation lasts 2.5 seconds. This is ideal
for reproducing church organ and choral
music.
This program recreates the acoustic
environment of a big church located in
south Germany. The reverberation delay is
very long while the early reflections are
smaller than with other sound field
programs.
This program features the sound field
created by the refectory (dining hall) of a
beautiful medieval Gothic monastery
located in Royaumont on the outskirts of
Paris.
JAZZ CLUB
I Village Gate
I Village Vanguard
I The Bottom Line
This is the sound field at a jazz club in New
York. It is in a basement and has a
relatively spacious floor area. The listener’s
virtual seat is at the center left of the hall.
A traditional jazz club in New York, located
on 7th Avenue. This room has a low ceiling,
and the “stage” is located in a corner. This
program creates an intimate “close-to-the
music” feel.
This is the sound field at stage front in “The
Bottom Line”, a famous New York jazz
club. The floor can seat 300 people to the
left and right in a sound field offering a real
and vibrant sound.
ROCK CONCERT
I Roxy Theatre
I Warehouse Loft
I Arena
The ideal program for lively, dynamic rock
music. The data for this program was
recorded at LA’s “hottest” rock club. The
listener’s virtual seat is at the center-left of
the hall.
This program simulates a space enclosed by
concrete. An energetic sound field is
created with relatively clear reflections
from the walls.
A classic shoe-box type concert hall. This
program gives you long delays between
direct sounds and effect sounds, with the
extraordinarily spacious feel of a large
arena.
ENTERTAINMENT
I Disco
I Party
I 8ch Stereo
This program recreates the acoustic
environment of a lively disco in the heart of
a big city. The sound is dense and highly
concentrated. It is also characterized by a
high-energy, “immediate” sound.
This is a sound field suitable for back-
ground music at parties where you can hear
the sound directly from the rear as well,
thus realizing music enjoyment over a wide
area.
This is a sound field suitable for back-
ground music at parties where you can hear
the sound directly from the rear as well.
The number of speakers to output depends
on “1 SPEAKER SET” in SET MENU.
E-89
Download from Www.Somanuals.com. All Manuals Search And Download.
CINEMA-DSP SOUND FIELD PROGRAM
The sound design of CINEMA-DSP sound field programs
Filmmakers intend the dialog to be located right on the screen, the effect sound a little farther back, the music spread even farther back, and
the surround sound around the listener. Of course, all of these sounds must be synchronized with the images on the screen.
CINEMA-DSP is an upgraded version of YAMAHA DSP specially designed for movie soundtracks. CINEMA-DSP integrates the DTS,
Dolby Digital, and DOLBY PRO LOGIC surround sound technologies with YAMAHA DSP sound field programs to provide the surround
sound field. It recreates the most complete movie sound design in your audio room. In CINEMA-DSP sound field programs, Yamaha’s
exclusive DSP processing is added to the front left, center, and right channels, so the listener can enjoy realistic dialogue, depth of sound,
smooth transition between sound sources, and a surround sound field that goes beyond the screen.
When a DTS or Dolby Digital signal is detected, the CINEMA-DSP sound field processor automatically chooses the most suitable sound
field program for that signal.
L SURROUND SOUND FIELD
PRESENCE SOUND FIELD
DIALOG
EFFECT
MUSIC
AV ROOM
R SURROUND SOUND FIELD
Sound field images of the CINEMA-DSP programs
Each CINEMA-DSP program has its own type of sound field processing block. The sound field data, including the presence and surround
sound fields, are based on actual measured data. The presence and surround sound fields can be expressed in the distribution of virtual sound
sources and echo patterns. However, as these two types of sound fields are processed with complex elements such as energy balance and
mixing signal ratios, they are expressed as a sound field based on auditory perception.
Stereo input
Dolby Digital or DTS input
Presence sound field
Presence sound field
Sound source
Front sound source
Listening position
Screen
Listening position
Listening room
Listening room
Left surround sound source
Left surround sound field
Surround sound field
Reverberation
Right surround sound source
Right surround sound field
Reverberation
E-90
Download from Www.Somanuals.com. All Manuals Search And Download.
CINEMA-DSP SOUND FIELD PROGRAM
Programs and features
If a Dolby Digital signal or DTS signal is input when the input mode is set to “AUTO”, the DSP program will be automatically switched to
the Dolby Digital playback sound field or DTS playback sound field.
No.
6
Program
Features
A deep and spatial feeling to reinforce lively video game sounds
An enthusiastic atmosphere of an actual rock or jazz concert
Clearer voice of a disc jockey sound
ENTERTAINMENT
Game
7
CONCERT VIDEO 1
CONCERT VIDEO 2
TV THEATER
Pop/Rock
DJ
8
9
Classical/Opera
Pavilion
Great presence and beautiful sounds
A feel of the spaciousness of a pavilion
Mono Movie
Variety/Sports
Spectacle
Sci-Fi
Natural reproduction of old monaural movies with moderate DSP processing
For various TV programs such as variety shows or sports programs
Ideal for any kind of Dolby Surround video sources, especially large-scale movie productions
For the newest science fiction films
10
11
MOVIE THEATER 1
MOVIE THEATER 2
Adventure
General
Ideal for the newest 70 mm and multichannel soundtrack films
Reproduction of sounds from 70 mm and multichannel soundtrack films with soft and
extensive sound field
12
DOLBY DIGITAL/
DTS SURROUND
Normal/EX/DTS-ES/
ES Matrix 6.1/ES
Discrete 6.1
To reproduce the Dolby Digital or DTS sources with excellent channel separation and stable
decoding
Enhanced/EX/ES
To add DSP effects to the Dolby Digital and DTS surround signals
To reproduce 2 channel sources as creating virtual multichannels
DOLBY PRO LOGIC Normal
Enhanced
DOLBY PRO LOGIC Movie
Music
DTS Neo: 6
Cinema
Music
Cautions
DSP
• The “
” indicator does not light up when selecting the program No. 12 except for the “Enhanced” mode.
• No sound will be output from the main speakers when a monaural source is played with sound field Program Groups 6 (Game) and 7 – 12.
• No surround signals will be output when a monaural source is played with the CINEMA DSP program No.12.
E-91
Download from Www.Somanuals.com. All Manuals Search And Download.
CINEMA-DSP SOUND FIELD PROGRAM
I Table of program names for each input format
According to the input signal format, this unit automatically chooses the appropriate decoder and DSP sound field pattern.
Input
2 channel
Stereo
5.1 channel
DOLBY DIGITAL
6.1 channel *1
3
No.
Program
DTS
DTS Spectacle
DTS Sci-Fi
DTS Adventure
DTS General
—
DOLBY DIGITAL EX *2
Spectacle EX
Sci-Fi EX
DTS ES
*
10
MOVIE THEATER 1
70 mm Spectacle
70 mm Sci-Fi
70 mm Adventure
70 mm General
—
DGTL Spectacle
DGTL Sci-Fi
DGTL Adventure
DGTL General
Normal
Spectacle ES
Sci-Fi ES
Adventure ES
General ES
—
11
12
MOVIE THEATER 2
DOLBY DIGITAL
DTS DIGITAL SUR
Adventure EX
General EX
EX
—
Enhanced
—
Enhanced EX
—
Normal
ES Matrix 6.1 *4
ES Discrete 6.1 *5
96/24 DTS-ES *6
—
—
96/24 Normal *6
—
—
—
—
—
—
—
—
—
Enhanced
—
—
—
—
—
—
—
Enhanced ES
PRO LOGIC
PRO LOGIC
DTS Neo: 6
Normal
Enhanced
Movie
—
—
—
—
—
—
—
—
—
—
—
—
Music
Cinema
Music
*1 means the EX/ES decoder is ON.
*2 means the DOLBY DIGITAL EX software is input.
*3 means the DTS ES software is input.
*4 means the DTS ES software encoded with Matrix 6.1 is input.
*5 means the DTS ES software encoded with Discrete 6.1 is input.
*6 means the DTS 96/24 software is input.
E-92
Download from Www.Somanuals.com. All Manuals Search And Download.
CINEMA-DSP SOUND FIELD PROGRAM
MOVIE THEATER programs
Most movie software has four-channel (left, center, right and surround) sound information encoded using Dolby Surround matrix processing
and stored on the left and right tracks. These signals are processed by the DOLBY PRO LOGIC decoder. The MOVIE THEATER programs
are designed to recreate the spaciousness and delicate nuances of sound that tend to be lost in the encoding and decoding processes.
The six-channel soundtracks found on 70 mm film produce precise sound field localization and rich, deep sound without using matrix
processing. This unit’s MOVIE THEATER 70 mm Programs provide the same quality of sound and sound localization that six-channel
soundtracks do. The built-in Dolby Digital decoder brings the professional quality sound designed for movie theaters into your home. With
this unit’s MOVIE THEATER program, you can recreate a dynamic sound that gives you the feeling of being at a public theater in your
living room using the Dolby Digital technology.
I DOLBY PRO LOGIC + DSP sound field effect
These programs express an immense sound field and a large surround effect. They also
give depth to the sound from the main speakers to recreate the realistic sound of a Dolby
Presence DSP sound field
Stereo theater.
• 70mm Spectacle
• 70mm Sci-Fi
• 70mm Adventure
• 70mm General
Surround DSP sound field
I Dolby Digital/DTS + DSP sound field effect
These programs use Yamaha’s tri-field DSP process on each of the Dolby Digital or DTS
signals for the front, left surround, and right surround channels. This processing enables
this unit to reproduce the immense sound field and surround expression of a Dolby Digital
or DTS equipped movie theater without sacrificing the clear separation of all channels.
Presence DSP
sound field
• DGTL/DTS Spectacle
• DGTL/DTS Sci-Fi
• DGTL/DTS Adventure
• DGTL/DTS General
Left surround DSP
sound field
Right surround DSP
sound field
Note
• If a Dolby Digital signal or DTS signal is input when the input mode is set to “AUTO”,
the DSP program will be automatically switched to the Dolby Digital playback sound
field or DTS playback sound field.
I Dolby Digital EX/DTS ES + DSP sound field effect
These programs provide you the maximum experience of the spacious surround effects since an extra rear center DSP sound field created
from the rear center channel is added.
E-93
Download from Www.Somanuals.com. All Manuals Search And Download.
CINEMA-DSP SOUND FIELD PROGRAM
ENTERTAINMENT
I Game
This program adds a deep and spatial feeling to video game sounds
and is also suitable for karaoke.
CONCERT VIDEO 1
I Pop/Rock
This program produces an enthusiastic atmosphere and lets you feel
as if you are at an actual jazz or rock concert.
I DJ
The sound field makes the voice of a disc jockey sound clearer.
CONCERT VIDEO 2
I Classical/Opera
I Pavilion
This program provides excellent vocal depth and overall clarity by
restraining excessive reverberation.
This program reproduces vocals clearly, letting you feel the
spaciousness of a pavilion. Reverberation, which is somewhat
delayed, reproduces the live acoustics unique to a pavilion, and
helps to make concert scenes more exciting.
The surround sound field is relatively moderate but it reproduces
beautiful sound using data collected from a concert hall.
TV THEATER
I Mono Movie
This program is provided for reproducing monaural video sources
(such as old movies). The program produces the optimum rever-
beration to create sound depth using only the presence sound field.
I Variety/Sports
Though the presence sound field is relatively narrow, the surround
sound field employs the sound environment of a large concert hall.
With this program, you can enjoy watching various TV programs
such as news, variety shows, music programs or sports programs.
MOVIE THEATER 1
I Spectacle
I Sci-Fi
This program creates the extremely wide sound field of a 70 mm
movie theater. It precisely reproduces the source sound in detail,
making both the video and the sound fields incredibly real. This
program is ideal for any kind of Dolby Surround video source
(especially large-scale movie productions).
This program clearly reproduces the broad and expansive cinematic
space from the soundtracks of the latest science fiction films.
MOVIE THEATER 2
I Adventure
I General
This program is ideal for precisely reproducing the sound design of
the newest 70 mm and multichannel soundtrack films. The sound
field is made to be similar to that of the newest movie theaters, so
the reverberations of the sound field itself are restrained as much as
possible.
This program is for reproducing sounds from 70 mm and multichan-
nel soundtrack films, and is characterized by a soft and extensive
sound field. The presence sound field is relatively narrow. It
spatially spreads all around and toward the screen, restraining the
effect of conversations without losing clarity.
DOLBY DIGITAL/DTS SURROUND
I Normal/EX/DTS-ES/ES Matrix 6.1/ES Dis-
I Enhanced/EX/ES
This program ideally simulates the multiple surround speaker
systems of 35 mm film theaters. The Dolby Surround decoding and
the digital sound field processing create precise effects without
altering the original sound orientation. The surround effects
produced by this sound field wrap around the viewer naturally from
the back to the left and right and toward the screen.
crete 6.1
The built-in decoder precisely reproduces sounds and sound effects
from sources. The highly efficient decoding process improves
crosstalk and channel separation and makes sound positioning
smoother and more precise.
In this program, no DSP effect is applied.
E-94
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND FIELD PROGRAM PARAMETER EDITING
You can enjoy good quality sound with the preset parameters. Although you do not have to change the initial settings, you can change some
of the parameters to better suit the input source or your listening room.
Changing parameter settings
A/B/C/D/E PRESET
Press +/– to change the parameter value.
6
TV INPUT
MUTE
When you set the parameter to a value other than the factory-
set value, an asterisk mark (*) appears by the parameter name
on the video monitor.
TV VOL
CH
VOLUME
STEREO
TV MUTE
DISC
EFFECT
5
3
PARAMETER
SET MENU
ON SCREEN LEVEL
2
SLEEP
TEST
6
PUSH
Repeat steps 4 to 6 above as necessary to change
other program parameters.
7
Cautions
• The available parameters may be displayed on more than one
OSD page for some of the programs. To scroll through pages,
press / .
Turn on the video monitor.
1
2
• You cannot change parameter values when “16 MEMORY
GUARD” on the SET MENU is set to “ON”. If you want to
change the parameter values, set “16 MEMORY GUARD” to
“OFF” (see page 62).
Press ON SCREEN repeatedly to select the full
display mode.
ON SCREEN
I To reset some of the parameters to the
factory-set values
Set PARAMETER/SET MENU to PARAMETER.
3
4
Select the parameter you want to reset. Then press and hold +/–
until the value temporarily stops at the factory-set value. The
asterisk mark (*) by the parameter name disappears on the video
monitor.
PARAMETER
SET MENU
I To reset all of the parameters to the factory-
set values
Select a DSP program you want to adjust.
Use “10 PARAMETER INI” on the SET MENU to reset all of the
parameter values of all DSP programs within the selected group to
the factory-set values (see page 59). This operation resets all of the
parameter values of all DSP programs within that group to the
factory-set values.
P10 MOVIE THEATER
70mm Spectacle
1
≥
EFCT TRIM…………0dB
P.INIT.DLY……13ms
P.ROOM SIZE……1.0
S.DELAY……………23ms
S.ROOM SIZE……1.0
Press
/
to select the parameter.
5
E-95
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS
You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all
of the following parameters are found in every program.
I EFCT TRIM (Effect Trim)
Function
This parameter adjusts the level of all the effect sounds within a narrow range.
Control range –3 dB – +3 dB
Description Depending on the acoustics of your listening room, you may want to increase or decrease the effect level relative to the
direct sound.
I INIT. DLY (Initial Delay)
Function
This parameter changes the apparent distance from the source sound by adjusting the delay between the direct sound and
the first reflection heard by the listener.
Control range 1 – 99 ms
Description The smaller the value, the closer the sound source seems to the listener. The larger the value, the farther the apparent
distance seems. For a small room, this parameter would be set to a small value, for a large room, set it to a large value.
Source sound
Primary reflected sound
Time
Time
Time
INIT. DLY
INIT. DLY
INIT. DLY
Sound source
Reflection face
Small value = 1 ms
Large value = 99 ms
I ROOM SIZE/P. ROOM SIZE for the presence sound field
Function
This parameter adjusts the apparent size of the surround sound field. The larger the value, the larger the surround sound
field becomes.
Control range 0.1 – 2.0
Description
As the sound is repeatedly reflected around a room, the larger the hall is, the longer the time between the original reflected
sound and the subsequent reflections. By controlling the time between the reflected sounds, you can change the apparent
size of the virtual venue. Changing this parameter from one to two, doubles the apparent length of the room.
Source sound
Primary reflected sound
Time
Small value
Time
Time
Large value
Sound source
Small value = 0.1
Large value = 2.0
E-96
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS
I LIVENESS
Function
This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections
decay.
Control range 0 – 10
Description The early reflections of a sound source decay much faster in a room with acoustically absorbent wall surfaces than in one
which has highly reflective surfaces. A room with acoustically absorbent surfaces is referred to as “dead,” while a room
with highly reflective surfaces is referred to as “live”. The LIVENESS parameter lets you adjust the early reflection decay
rate, and thus the “liveness” of the room.
Source sound
Live
Dead
Time
Time
Time
Sound source
Large
reflected sound
Small reflected
sound
Small value = 0
Large value = 10
I P. INIT. DLY (Presence Initial Delay)
Function
This parameter adjusts the delay between the direct sound and the first reflection in the presence sound field.
Control range 1 – 99 ms
Description
The larger the value, the later the first reflection begins.
I S. INIT. DLY (Surround Initial Delay)
Function
This parameter adjusts the delay between the direct sound and the first reflection on the surround side of the sound field.
You can only adjust this parameter when at least two front channels and two rear channels are used.
Control range 1 – 49 ms
Description The larger the value, the later the first reflection begins. You can only adjust this parameter for the Dolby Digital and DTS
signals.
E-97
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS
I S. DELAY (Surround Delay)
Function
This parameter adjusts the delay between the direct sound and the first reflection in the surround sound field.
Control range 0 – 49 ms (The range depends on the signal format.)
Description
When Dolby Digital signals are decoded: the larger the parameter, the later the surround sound source begins.
When a non-Dolby Digital program is decoded: the larger the parameter, the later the surround sound field begins.
No surround sound source is produced.
Dolby Digital or DTS
(multichannel) input
PCM, analog, Dolby Digital or DTS
(2-channel) input
The surround sound field is not
reproduced.
Direct sound
Direct sound
S sound field
SURROUND (LS/RS)
S sound field
Time
Time
S. DELAY S. INIT. DELAY
S. DELAY
I S. ROOM SIZE (Surround Room Size)
Function
This parameter adjusts the apparent size of the surround sound field.
Control range 0.1 – 2.0
Description
The larger the value, the larger the surround sound field becomes.
I S. LIVENESS (Surround Liveness)
Function
This parameter adjusts the apparent reflectivity of the virtual walls in the surround sound field.
Control range 0 – 10
Description
The larger the value, the more reflective the surround sound field walls become.
I RC INI. DLY (Rear Center Initial Delay)
Function
This parameter adjusts the delay between the direct sound and the first reflection in the rear center sound field.
Control range 1 – 49 ms
Description
The larger the value, the later the first reflection begins.
I RC ROOM SIZE (Rear Center Room Size)
Function
This parameter adjusts the apparent size of the rear center sound field.
Control range 0.1 – 2.0
Description
The larger the value, the more reflective the presence sound field walls become.
I RC LIVENESS (Rear Center Liveness)
Function
This parameter adjusts the apparent reflectivity of the virtual wall in the rear center sound field.
Control range 0 – 10
Description
The larger the value, the more reflective the surround sound field walls become.
E-98
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS
I REV.TIME (Reverberation Time)
Function
This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to decay by 60 dB (at 1
kHz). This changes the apparent size of the acoustic environment over an extremely wide range.
Control range 1.0 – 5.0 s
Description Set a longer reverberation time for “dead” sources and listening room environments and a shorter time for “live” sources
and listening room environments.
Source sound
Reverberation
Reverberation
Primary reflected sound
60 dB
60 dB
60 dB
Time
Time
Time
REV. TIME
REV. TIME
REV. TIME
Long reverberation
Sound source
Short reverberation
Small value = 1.0 s
Large value = 5.0 s
I REV. DELAY (Reverberation Delay)
Function
This parameter adjusts the time difference between the beginning of the direct sound and the beginning of the reverbera-
tion sound.
Control range 0 – 250 ms
Description The larger the value, the later the reverberation sound begins. A later reverberation sound makes you feel like you are in a
larger acoustic environment.
Source sound
(dB)
60 dB
Reverberation
Time
REV. DELAY
REV. TIME
I REV. LEVEL (Reverberation Level)
Function
Control range 0 – 100%
Description The larger the value, the stronger the reverberation becomes.
This parameter adjusts the volume of the reverberation sound.
Source sound
REV. LEVEL
Time
E-99
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS
For 8ch Stereo
I CT LEVEL (Center Level)
I RL LEVEL (Rear Left Level)
I RC LEVEL (Rear Center Level)
I RR LEVEL (Rear Right Level)
I FL LEVEL (Front Left Level)
I FR LEVEL (Front Right Level)
Function
These parameters adjust the volume level for each channel in 8-channel stereo mode.
Control range 0 – 100 %
For PRO LOGIC Music
I PANORAMA
Function
This parameter extends the front stereo image to include the surround speakers for wraparound effect.
Control range OFF/ON
I DIMENSION
Function
This parameter gradually adjusts the soundfield either towards the front or towards the rear.
Control range –3 – STD – +3
I CENTER WIDTH
Function
This parameter adjusts the center image from all three front speakers to varying degrees.
Control range 0 – 7
For DTS Neo: 6 Music
I C. IMAGE (Center Image)
Function
This parameter adjusts the center image from all three front speakers to varying degrees.
Control range 0 – 0.5
E-100
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
TROUBLESHOOTING ...................................................................................... 102
CINEMA EQ FREQUENCY CHARACTERISTICS ........................................... 105
REFERENCE CHART FOR THE INPUT AND OUTPUT JACKS ..................... 106
SPECIFICATIONS............................................................................................. 107
E-101
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction
below does not help, set this unit in the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or
service center.
I General
Problem
Cause
Remedy
This unit fails to turn on when
STANDBY/ON (or SYSTEM
The power cord is not connected or the plug is not
completely inserted.
Firmly connect the power cord.
POWER) is pressed, or enters in
the standby mode soon after the
power has been turned on.
IMPEDANCE SELECTOR on the rear panel is not
fully set to the upper or lower position.
Set the switch fully to the upper or lower position
when this unit is in the standby mode.
The protection circuitry has been activated.
Make sure all speaker wire connections on this unit
and on all speakers are secure and that the wire for
each connection does not touch anything other than its
respective connection.
This unit has been exposed to a strong external electric Set this unit in the standby mode, disconnect the
shock (such as lightning and strong static electricity).
power cord, plug it back in after 30 seconds, and start
operating.
On-screen display does not
appear.
The setting for the on-screen display is set to
“DISPLAY OFF”.
Select the full display or short display mode (see page
33).
The BLUE BACK setting under “15 DISPLAY SET”
on the SET MENU is set to “OFF”, and no video
signal is input to this unit.
Set BLUE BACK to “AUTO” to always show the
OSD (see page 62).
No sound and/or no picture.
Incorrect input or output cable connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
An appropriate input source has not been selected.
Select an appropriate input source with INPUT
SELECTOR or 6CH INPUT (or the input selector
buttons) (see page 42).
The speaker connections are not secure.
Secure the connections.
The main speakers to be used have not been selected
properly.
Select the main speakers with SPEAKERS A and/or
B (see page 42).
The volume is turned down.
The sound is muted.
Turn up the volume.
Press MUTE or any operation buttons of this unit to
cancel a mute and adjust the volume.
The signals that this unit cannot reproduce such as a
CD-ROM are being input.
Play a source whose signals this unit can reproduce.
The output and input for the picture are connected to
different types of video jacks.
Make connections using the same type of jack
(between S VIDEO, VIDEO (composite), or
COMPONENT VIDEO jacks) for both the input and
output.
The sound suddenly goes off.
The protection circuit has been activated because of a
short circuit, etc.
Check IMPEDANCE SELECTOR is set to the
appropriate position and then turn this unit back on.
Check the speaker wires are not touching each other
and then turn this unit back on.
The sleep timer has functioned.
The sound is muted.
Turn on the power, and play the source again.
Press MUTE or any operation buttons of this unit to
cancel a mute and adjust the volume.
Only the speaker on one side can
be heard.
Incorrect cable connections.
Connect the cables properly. If the problem persists,
the cables may be defective.
BALANCE is turned to the left or right end.
Adjust it to the appropriate position.
E-102
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Cause
Remedy
No sound from the effect speak-
ers.
The input source is being played with normal stereo
reproduction. (“STEREO” is shown in the front panel
display.)
Press STEREO/EFFECT to turn on the sound effect
(see page 47).
Digital signals that are over 96 kHz sampling
frequency are input into this unit.
No sound from the center speaker. “1A CENTER SP” on the SET MENU is set to
Select the appropriate mode for your center speaker
(see page 35).
“NONE”.
One of the Hi-Fi DSP programs (1 to 6 except for
Game and 8ch Stereo) has been selected.
Select another DSP program.
No sound from the rear speakers.
“1C REAR L/R SP” on the SET MENU is set to
“NONE”.
Select the appropriate speaker mode for the rear L/R
speakers (see page 36).
A monaural source is being played with the program
12.
Select another DSP program.
No sound from the rear center
speaker.
“1C REAR L/R SP” on the SET MENU is set to
“NONE”.
If the speaker mode for the rear L/R speakers is set to
“NONE”, the speaker mode for the rear center speaker
is automatically set to “NONE”. Select the appropriate
speaker mode for the rear L/R speaker mode (see page
36).
“1D REAR CT SP” on the SET MENU is set to
“NONE”.
Select “LRG” or “SML” (see page 36).
Select “SW” or “BOTH” (see page 37).
No sound from the subwoofer.
“1E LFE/BASS OUT” on the SET MENU is set to
“MAIN” when a Dolby Digital or DTS signal is being
played.
“1E LFE/BASS OUT” on the SET MENU is set to
“SW” or “MAIN” when a 2-channel source is being
played.
Select “BOTH” (see page 37).
Select “MAIN” (see page 37).
The source does not contain low bass signals (90 Hz
and below).
Poor bass reproduction.
“1E LFE/BASS OUT” on the SET MENU is set to
“SW” or “BOTH” and your system does not include a
subwoofer.
The output mode for each speaker (main, center, rear,
or rear center) on the SET MENU does not match
your speaker configuration.
Select the appropriate output mode for each speaker
based on the size of the speakers in your configura-
tion.
A “humming” sound can be heard. Incorrect cable connections.
Firmly connect the audio plugs. If the problem
persists, the cables may be defective.
No connection from the turntable to the GND
terminal.
Connect the grounding cord of your turntable to the
GND terminal of this unit (see page 20).
The volume level is low while
playing a record.
The record is being played on a turntable with an MC
cartridge.
The turntable should be connected to this unit through
an MC-head amplifier.
The volume level cannot be
increased, or the sound is
distorted.
The component connected to the OUT (REC) jacks of Turn on the power to the component.
this unit is turned off.
A source cannot be recorded.
A source component is connected to the analog input
jacks of this unit for digital recording.
Connect a source component to the digital input jacks.
Digital connections are not made between this unit
and other components for playback or recording.
Make digital connections.
A source component is connected to the digital input
jacks of this unit for analog recording.
Connect a source component to the analog input jacks.
Make analog connections.
Analog connections are not made between this unit
and other components for playback or recording.
Some recording components cannot record the Dolby
Digital or DTS sources.
E-103
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Cause
Remedy
The sound field parameters and
some other settings on this unit
cannot be changed.
“16 MEMORY GUARD” on the SET MENU is set to Select “OFF” (see page 62).
“ON”.
This unit does not operate
properly.
The internal microcomputer has been frozen by an
external electric shock (such as lightning or excessive
static electricity) or by a power supply with low
voltage.
Disconnect the AC power cord from the outlet and
then plug it in again after about 30 seconds.
“CHECK SP WIRES” appears on
the front panel display.
Speaker cables are short circuited.
This unit is in the standby mode.
Make sure all speaker cables are connected correctly.
Turn on the power of this unit.
The sound is degraded when
listening with headphones
connected to a tape deck or CD
player that is connected to this
unit.
There is noise interference from
digital or high-frequency equip-
ment, or this unit.
This unit is too close to the digital or high-frequency
equipment.
Move this unit further away from such equipment.
This unit suddenly turns into the
standby mode.
The internal temperature becomes too high and the
overheat protection circuitry has been activated.
Wait until this unit cools down and then turn it back
on.
I Remote control
Problem
Cause
Remedy
The remote control does not work
nor function properly.
Wrong distance or angle.
The remote control will function within a maximum
range of 6 m (20 feet) and no more than 30 degrees
off-axis from the front panel (see page 10).
Direct sunlight or lighting (from an inverter type of
fluorescent lamp, etc.) is striking the remote control
sensor of this unit.
Reposition this unit.
The batteries are weak.
Replace all batteries with new ones and press RESET.
The manufacturer code has not been correctly set.
Set the manufacturer code correctly (see page 66).
Try to set the other codes of the same manufacturer
(see page 66).
Even if the manufacturer code is correctly set, there
are some models that do not respond to the remote
control.
Program the necessary functions independently into
the programmable buttons on this unit’s remote
control using the Learn feature.
The remote control does not
“learn” new functions.
The batteries of this remote control and/or the other
remote control are too weak.
Replace the batteries.
The distance between the two remote controls is too
much or too little.
Place the remote controls at the proper distance (see
page 68).
The signal coding or modulation of the other remote
control is not compatible with this remote control.
Learning is not possible.
Memory capacity is full.
Further learning is not possible without deleting
unnecessary functions (see page 79).
E-104
Download from Www.Somanuals.com. All Manuals Search And Download.
CINEMA EQ FREQUENCY CHARACTERISTICS
I L, C, R preset value
HIGH: FRQ 12.7 kHz/GAIN –3 dB
PEQ: FRQ 12.7 kHz/GAIN –4 dB
I FRONT and REAR preset value
HIGH: FRQ 12.7 kHz/GAIN 0 dB
PEQ: FRQ 8.0 kHz/GAIN –3 dB
+6
+3
0
+6
+3
0
HIGH
PEQ
PEQ
HIGH
–3
–6
–9
–3
–6
–9
HIGH
+
PEQ
20
50
100
200
500
FRQ
1k
2k
5k
10k
20k
20
50
100
200
500
FRQ
1k
2k
5k
10k
20k
I HIGH frequency
FRQ 1.0 kHz/GAIN +6 – –9 dB
FRQ 1.0 – 12.7 kHz/GAIN +6/–9 dB
+6
+6
+3
0
+3
1.0k
1.2k
1.6k
2.0k
0
2.5k
3.2k
4.0k
5.0k
–3
–6
–9
–3
5.7k
6.3k
7.1k
8.0k
9.0k
10.1k
11.3k
–6
12.7kHz
–9
20
50
100
200
500
FRQ
1k
2k
5k
10k
20k
20
50
100
200
500
FRQ
1k
2k
5k
10k
20k
I PEQ frequency
FRQ 1.0 kHz/GAIN +6 – –9 dB/Q 1.85 (fixed)
FRQ 1.0 – 12.7 kHz/GAIN +6/–9 dB/Q 1.85 (fixed)
+6
+6
+3
0
+3
1.0k
1.2k
1.6k
2.0k
0
2.5k
3.2k
4.0k
5.0k
–3
–6
–9
–3
5.7k
6.3k
7.1k
8.0k
9.0k
10.1k
11.3k
–6
12.7kHz
–9
20
50
100
200
500
FRQ
1k
2k
5k
10k
20k
20
50
100
200
500
FRQ
1k
2k
5k
10k
20k
E-105
Download from Www.Somanuals.com. All Manuals Search And Download.
REFERENCE CHART FOR THE INPUT AND OUTPUT JACKS
AUDIO
VIDEO
ANALOG
DIGITAL *1
COAXIAL OPTICAL
IN OUT
COMPOSITE
S VIDEO
COMPONENT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
PHONO
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
CD
ꢀ
ꢀ
ꢀ
TUNER
CD-R
ꢀ
ꢀ
ꢀ
ꢀ
MD/TAPE
DVD
ꢀ
ꢀ*2
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ*1
ꢀ*1
D-TV/LD
CABLE
SAT
ꢀ
ꢀ*1
VCR 1
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
VCR 2
VCR 3/DVR
VIDEO AUX
6CH INPUT
MAIN
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
SURROUND
CENTER
SUBWOOFER
PREOUT/MAIN IN
MAIN
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
REAR (SURROUND)
CENTER
REAR CTR
SUBWOOFER
FRONT
ꢀ
MONITOR OUT
ZONE 2 OUT
PHONES
SPEAKERS
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
MAIN A/B, REAR (SURROUND), CENTER, REAR CENTER, FRONT
*1 You can designate the input for these jacks according to your component by using “8 I/O ASSIGNMENT” on the SET MENU (see page
58 for details).
*2 You can switch the setting of this jack between LD q RF (AC-3) and COAXIAL LD by using “8 I/O ASSIGNMENT” on the SET
MENU (see page 58 for details).
E-106
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
I Audio Section
I Video Section
Minimum RMS Output Power per Channel
Video Signal Type
MAIN L/R, CENTER, REAR L/R/C
(20 Hz to 20 kHz, 0.015% THD, 8 Ω) ............................... 130 W
FRONT L/R (1 kHz, 0.05% THD, 8 Ω) ............................... 45 W
[Europe and U.K. models] ..................................................... PAL
[General and China models] ....................................... NTSC/PAL
Composite Video Signal Level ...................................... 1 Vp-p/75 Ω
Maximum Power [for General and China models]
MAIN L/R, CENTER, REAR L/R/C
(1 kHz, 10% THD, 8 Ω) ..................................................... 200 W
FRONT L/R (1 kHz, 10% THD, 8 Ω) .................................. 65 W
Dynamic Power (IHF) [for General and China models]
MAIN L/R (8/6/4/2 Ω) .................................. 160/200/260/360 W
Dynamic Headroom [for General and China models]
MAIN L/R (8 Ω) ................................................................ 1.3 dB
DIN Standard Output Power per Channel
S-Video Signal Level
Y ............................................................................... 1 Vp-p/75 Ω
C ........................................................................ 0.286 Vp-p/75 Ω
Component Video Signal Level
Y ............................................................................... 1 Vp-p/75 Ω
PB/CB, PR/CR .......................................................... 0.7 Vp-p/75 Ω
Maximum Input Level .......................................................... 1.5 Vp-p
Signal to Noise Ratio .................................................. 50 dB or more
Frequency Response (MONITOR OUT)
[for Europe and U.K. models]
MAIN L/R (1 kHz, 0.7% THD, 4 Ω) ................................. 210 W
IEC Power [for Europe and U.K. models]
VIDEO, S VIDEO ................................... 5 Hz to 10 MHz, –3 dB
COMPONENT VIDEO ........................... DC to 100 MHz, –3 dB
MAIN L/R (1 kHz, 0.015% THD, 8 Ω) ............................. 140 W
Power Band Width
MAIN L/R (55 W, 0.04% THD, 8 Ω)................. 10 Hz to 50 kHz
Damping Factor
I General
Power Supply
[Europe and U.K. models] ................................. AC 230 V, 50 Hz
[General and China models] .... AC 110/120/220/240 V, 50/60 Hz
MAIN L/R (20 Hz to 20 kHz, 8 Ω) ........................... 200 or more
Input Sensitivity/Impedance (100 W/8 Ω)
Power Consumption ................................................................ 650 W
Standby Mode [Europe and U.K. models] .......................... 1.2 W
Standby Mode [General and China models] ....................... 1.5 W
CD, etc. ................................................................. 150 mV/47 kΩ
PHONO MM ......................................................... 2.5 mV/47 kΩ
MAIN IN ...................................................................... 1 V/47 kΩ
AC Outlets (Total 100 W maximum)
[U.K. model]............................................................. 1 (Switched)
[Other models] .......................................................... 3 (Switched)
Output Level/Impedance
REC OUT ............................................................. 150 mV/600 Ω
MAIN OUT ................................................................. 1 V/1.2 kΩ
SUBWOOFER
[SPLIT L/R] ................................................................ 2 V/1.2 kΩ
[MONO] ...................................................................... 4 V/1.2 kΩ
Dimensions (W x H x D) .................................. 435 x 211 x 473 mm
(17-1/8” x 8-1/4” x 18-5/8”)
Weight.................................................................28 kg (61 lbs 11 oz)
Accessories ................................................................ Remote control
Batteries (3) (LR6)
PHONES Output ....................................................... 150 mV/100 Ω
Frequency Response (10 Hz to 100 kHz)
Power cord (except for U.K. model)
CD, etc. to MAIN L/R SP. OUT.......................................... –3 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
*Specifications are subject to change without notice.
CD, etc. to MAIN OUT (1 V) ............................... 0.005% or less
MAIN IN to SP OUT (65 W/8 Ω) ......................... 0.005% or less
Signal to Noise Ratio (IHF-A network)
(Input shorted, EFFECT off, 250 mV) ................ 100 dB or more
Residual Noise (IHF-A network)
MAIN L/R SP. OUT .............................................. 150 µV or less
Channel Separation (Vol –30 dB, 5.1 kΩ terminated)
1 kHz/10 kHz............................................... 70 dB/60 dB or more
Tone Control (MAIN L/R)
Bass Boost/Cut .................................................... 10 dB (50 Hz)
Treble Boost/Cut ............................................... 10 dB (20 kHz)
Bass Extension ...................................................... +6 dB (60 Hz)
E-107
Download from Www.Somanuals.com. All Manuals Search And Download.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B.
J
A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in Japan
V844660
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Westinghouse Flat Panel Television SK 40H520S User Manual
Whirlpool Cooktop WBC310 User Manual
Whirlpool Ice Maker 1 User Manual
Whirlpool Oven W10192049B User Manual
Whirlpool Ventilation Hood RH2630XJB0 User Manual
Whirlpool Ventilation Hood W10018010 User Manual
Yamaha CD Player CDR200tx User Manual
Yamaha Stereo Amplifier AX 10 User Manual
Zanussi Cooktop ZGF 982 User Manual
Zanussi Pasta Maker 200380 User Manual