B G R T
AX-392
Natural Sound Stereo Integrated Amplifier
Préampli/ampli de puissance stéréo de la série “Natural Sound”
Natural Sound Stereo-Verstärker
Natural Sound Integrerad Stereo Förstärkare
Amplificatore integrato stereo a Suono Naturale
Amplificador integrado estéreo de Sonido Natural
Natural Sound Geïntegreerde Stereo Versterker
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for selecting this YAMAHA stereo amplifier.
FEATURES
● 60W + 60W (8Ω) RMS Output Power, 0.04% THD, 20–20,000 Hz
● High Dynamic Power, Low Impedance Drive Capability
● Continuously Variable LOUDNESS Control
● CD DIRECT AMP Switch to Reproduce the Purest CD Sound
● Remote Control Capability
CONTENTS
SUPPLIED ACCESSORIES ..............................................................................2
FEATURES .........................................................................................................3
CAUTION ...........................................................................................................4
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER ............................5
CONNECTIONS ................................................................................................6
CONTROLS AND THEIR FUNCTIONS .............................................................8
OPERATIONS ..................................................................................................11
TROUBLESHOOTING .....................................................................................14
SPECIFICATIONS ...........................................................................................15
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1. To assure the finest performance, please read this manual
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit
itself is turned off. This state is called the standby mode.
In this state, this unit is designed to consume a very small
quantity of power.
carefully. Keep it in a safe place for future reference.
2. Install this unit in a cool, dry, clean place – away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold. Avoid sources of humming
(transformers, motors). To prevent fire or electrical shock,
do not expose the unit to rain or water.
For U.K. customers
3. Never open the cabinet. If something drops into the set,
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
contact your dealer.
4. Do not use force on switches, controls or connection wires.
When moving the unit, first disconnect the power plug and
the wires connected to other equipment. Never pull the
wires themselves.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
5. The openings on the cabinet assure proper ventilation of
the unit. If these openings are obstructed, the temperature
inside the cabinet will rise rapidly. Therefore, avoid placing
objects against these openings, and install the unit in well-
ventilated condition. Be sure to allow a space of at least 10
cm behind, 10 cm on the both sides and 20 cm above the
top panel of the unit. Otherwise it may not only damage the
unit, but also cause fire.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT:
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
6. Always set the VOLUME control to “– ” before starting
∞
the audio source play: increase the volume gradually to an
appropriate level after the play has been started.
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the
terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED. Making sure that neither core is
connected to the earth terminal of the three pin plug.
7. Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
8. Be sure to read the “TROUBLESHOOTING” section
regarding common operating errors before concluding that
the unit is faulty.
9. When not planning to use this unit for long periods of
time (ie., vacation, etc.), disconnect the AC power plug
from the wall outlet.
10. To prevent lightning damage, disconnect the AC power
WARNING
plug and antenna cable when there is an electrical storm.
Do not change the IMPEDANCE SELECTOR switch
setting while the power to this unit is on, otherwise this
unit may be damaged.
11. Grounding or polarization – Precautions should be taken
so that the grounding or polarization of an appliance is not
defeated.
IF THIS UNIT FAILS TO TURN ON WHEN THE
STANDBY/ON SWITCH IS PRESSED;
The IMPEDANCE SELECTOR switch may not be set to
either end closely. If so, set the switch to either end closely.
12. Do not connect audio equipment to the AC outlet on the
rear panel if the equipment requires more power than the
outlet is rated to provide.
IMPEDANCE SELECTOR
13. Voltage Selector (China and General Models only)
The voltage selector on the rear panel of this unit must
be set for your local main voltage BEFORE plugging
into the AC main supply.
Voltages are 110/120/220/240 V AC, 50/60 Hz.
IMPEDANCE SELECTOR
SET BEFORE POWER ON
A
OR
A
B
B
:
:
8ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
A
OR
B
1: 2ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
A
B
:
IMPORTANT
Please record the serial number of this unit in the space
below.
MAINS
A
B
Model:
l00W MAX. TOTAL
SWITCHED
CAUTION
SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
AC OUTLETS
SPEAKERS
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
(Europe model)
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Battery installation
Remote control transmitter operation range
Remote control
sensor
2
1
Within approximately
6 m (19.7 feet)
3
Battery replacement
Notes
●
There should be no large obstacles between the remote
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
control transmitter and the main unit.
If the remote control sensor is directly illuminated by strong
●
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid
direct lighting.
Notes
●
Use only AA, R6, UM-3 batteries for replacement.
●
Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
Remove the batteries if the remote control transmitter will
●
not be used for an extended period of time.
If batteries leak, dispose of them immediately. Avoid
●
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Never plug in this unit and other components until all connections are completed.
●
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L
(left) to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual for each component to be connected to this
unit.
●
If you have YAMAHA components numbered as 1, 2, 3, 4, etc. on the rear panel, connections can be made easily by only
connecting the output (or input) terminals of each component to the same-numbered terminals of this unit.
Speakers A
Turntable
MD recorder, etc.
Tape deck, etc.
Right
Left
(Europe model)
2
IMPEDANCE SELECTOR
SET BEFORE POWER ON
A
OR
A
B
B
:
:
8ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
A
OR
B
1: 2ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
*
A
B
:
MAINS
GND
A
B
1
CD
1
PHONO
TUNER
AUX
MD
TAPE
PLAY
3
REC
4
PLAY
REC
4
2
3
*
l00W MAX. TOTAL
SWITCHED
CAUTION
SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
AC OUTLETS
SPEAKERS
To AC outlet
Right
Left
Video cassette player,
LD player, etc.
CD player
Tuner
Speakers B
1
2
: Refer to “ABOUT THE ACCESSORY
TERMINALS” on page 7.
,
6 * *
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING SPEAKERS
●
Connect the SPEAKERS terminals to your speakers with wire
of the proper gauge, cut as short as possible. If the
connections are faulty, no sound will be heard from the
speakers. Make sure that the polarity of the speaker wires is
correct, that is, + and – markings are observed. If these wires
are reversed, the sound will be unnatural and lack bass. Do
not let the bare speaker wires touch each other or the
metal parts of this unit as this could damage this unit
and/or speakers.
One or two speaker systems can be connected to this unit.
If you connect only one speaker system, connect it to either
the SPEAKERS A or B terminals.
Use speakers with the specified impedance shown on the
rear of this unit.
●
●
<China and General models only>
Banana Plug connections are also possible. Simply insert
the Banana Plug connector into the corresponding terminal.
How to Connect:
Red: positive (+)
Black: negative (–)
2
Unscrew the knob.
Insert the bare wire.
[Remove approx. 5mm
(1/4”) insulation from
the speaker wires.]
➀
➁
1
3
Tighten the knob and
➂
secure the wire.
IMPEDANCE SELECTOR switch
Be sure to switch this only when the power to this unit is not
IMPEDANCE SELECTOR
SET BEFORE POWER ON
on.
A
OR
A
B
B
:
:
8ΩMIN. /SPEAKER
4ΩMIN. /SPEAKER
Select the position whose requirements your speaker system
meets.
A
OR
B
1: 2ΩMIN. /SPEAKER
8ΩMIN. /SPEAKER
A
B
:
WARNING
Do not change the IMPEDANCE SELECTOR switch
setting while the power to this unit is on, otherwise this
unit may be damaged.
(Upper position)
If you use one pair of speakers, the impedance of each
speaker must be 4Ω or higher.
If you use two pairs of speakers, the impedance of each
speaker must be 8Ω or higher.
IF THIS UNIT FAILS TO TURN ON WHEN THE
STANDBY/ON SWITCH IS PRESSED;
The IMPEDANCE SELECTOR switch may not be set to
either end closely. If so, set the switch to either end closely.
(Lower position)
If you use one pair of speakers, the impedance of each
speaker must be 6Ω or higher.
If you use two pairs of speakers, the impedance of each
speaker must be 12Ω or higher.
ABOUT THE ACCESSORY TERMINALS
1
2
AC OUTLET(S) (SWITCHED)
GND terminal (For turntable use)
*
*
(Europe, China and General models)
Connecting the ground wire of the turntable to this terminal will
normally minimize hum, but in some cases better results may
be obtained with the ground wire disconnected.
.......................................................... 3 SWITCHED OUTLETS
(U.K. model) ........................................ 1 SWITCHED OUTLET
Use these to connect the power cords from your components
to this unit.
The power to the SWITCHED outlets is controlled by this unit’s
STANDBY/ON switch or the provided remote control
transmitter’s POWER key. These outlets will supply power to
any component whenever this unit is turned on.
The maximum power (total power consumption of components)
that can be connected to the SWITCHED AC OUTLET(S) is
100 watts.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND THEIR FUNCTIONS
FRONT PANEL
1
2
3
4
5
6
7 8 9
0
NATURAL SOUND STEREO AMPLIFIER AX 392
SLEEP
AUX
TAPE
MD
CD
TUNER
PHONO
TAPE MONITOR
CD DIRECT AMP
INPUT
VOLUME
l6
20
l2
28
8
2
FLAT
0
0
0
STANDBY/ON
l
l
l
l
l
l
l
–
30dB
l0
2
2
2
2
2
2
2
4
3
3
3
9
40
3
3
3
3
4
4
4
8
4
4
4
4
L
5
5
R
5
7
5
5
5
5
6
60
BASS
TREBLE
BALANCE
LOUDNESS
0
–dB
PHONES
SPEAKERS
A
B
ON
OFF
A
B
C
D
E
F
1 STANDBY/ON switch
7 TAPE MONITOR switch
Press this switch to turn the power to this unit on. Press it
again to turn this unit into the standby mode.
When the tape deck connected to the TAPE terminals on the
rear of this unit is used for recording, you can monitor the
sounds being recorded by pressing TAPE MONITOR so that
TAPE MONITOR indicator lights up.
Standby mode
In this state, this unit consumes a very small quantity of
power to receive infrared-signals from the remote control
transmitter.
8 INPUT selector
When turned, selects a program source to listen to.
The input source indicator for the currently selected source
lights up.
2 Power indicator
Lights up while the power to this unit is on.
9 CD DIRECT AMP switch
3 Remote control sensor
Press this switch inward to listen to a CD source in the purest
sound. (Refer to page 13 for details.)
Receives signals from the remote control transmitter.
4 SLEEP indicator
0 VOLUME control
Lights up while the built-in SLEEP timer is functioning.
Used to raise or lower the volume level.
PHONES
5 Input source indicators
A PHONES jack
The indicator for the source selected by the INPUT selector
lights up.
When you listen with headphones,
connect the headphones to the
PHONES jack.
6 TAPE MONITOR indicator
When listening with headphones
privately, set both the SPEAKERS
A and B switches to the OFF
position.
Lights up while the TAPE MONITOR switch is on.
* When the tape deck (TAPE) is selected as the input source,
this indicator will not light up even if the TAPE MONITOR
switch is on.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
B SPEAKERS switches
D BALANCE control
Set the switch A or B (or both A and B) for the speaker system
(connected to this unit) you will use to the ON position. Set the
switch for the speaker system you will not use to the OFF
position.
Adjusts the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
E Continuously variable LOUDNESS control
Used to compensate for the human ears’ loss of sensitivity to
high and low-frequency ranges at low volume.
C Tone controls
BASS
Used to increase or decrease the low frequency response.
The 0 position produces flat response.
TREBLE
F Control door
See below for how to open and close the control door.
Used to increase or decrease the high frequency response.
The 0 position produces flat response.
Open/close the control door
When it is not necessary to operate controls inside the control
door, close the door.
To close the door
To open the door
1
2
9
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL TRANSMITTER
The remote control transmitter provided with this unit is designed to control all the most commonly used functions of this unit. If the
CD player, tuner, tape deck, etc. connected to this unit are YAMAHA components designed for remote control compatibility, then this
remote control transmitter will also control various functions of each component.
For Control of This Unit
1 SLEEP timer key
This unit is automatically turned into the standby mode one
hour after this key is pressed (so that SLEEP indicator lights
up).
2 POWER key
Turns the power to this unit on and turns this unit into the
standby mode alternately.
YAMAHA HiFi SYSTEM
REMOTE CONTROL TRANSMITTER
3 Input selector keys
AUX
Select input source.
PLAY
DIR A
DIR B REC/PAUSE
MD
4 VOLUME +/– keys
1
Turn the volume level up/down.
TAPE
A/B
A/B/C/D/E
TUNER
–
PRESET
+
3
4
For Other Component Control
2
3
PLAY
DISC
CD
Identify the remote control transmitter keys with your
component’s keys. If these keys are identical, their functions
will be the same. For each key function, refer to the
corresponding instruction in your component’s manual.
PHONO
POWER
VOLUME
SLEEP
1
2
1 Tape deck keys
Control tape deck.
*
DIR A, B and A/B are applicable only to double
cassette tape deck.
*
For a single cassette deck with automatic reverse
function, pressing DIR A will reverse the direction of
tape running.
2 Tuner keys
Control tuner.
+: Selects higher preset station number.
–: Selects lower preset station number.
A/B/C/D/E: Selects the group (A – E) of preset station
numbers.
3 CD player keys
Control compact disc player.
*
DISC is applicable only to compact disc changer.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
3
TO PLAY A SOURCE
7
NATURAL SOUND STEREO AMPLIFIER AX 392
SLEEP
AUX
TAPE
MD
CD
TUNER
PHONO
TAPE MONITOR
CD DIRECT AMP
INPUT
VOLUME
l6
20
l2
28
8
2
FLAT
0
0
0
STANDBY/ON
l
l
l
l
l
l
l
–
30dB
l0
2
2
2
2
2
2
2
40
4
3
3
3
3
3
3
3
9
4
4
4
4
4
4
4
8
1, 6
5
5
5
5
L
5
5
R
5
7
6
60
2
BASS
TREBLE
BALANCE
LOUDNESS
0
–dB
PHONES
SPEAKERS
A
B
ON
OFF
7
3
4
VOLUME
1
4
Select the speakers to be used.
l6
20
l2
SPEAKERS
28
8
A
B
4
40
ON
OFF
2
60
0
–dB
Set to the “∞” position.
If you use two speaker systems, press both the A and B
switches.
*
2
3
Turn the power on.
5
6
Play the source.
Lights up.
STANDBY/ON
VOLUME
l6
20
l2
28
60
8
4
40
2
Select a desired input source.
0
–dB
INPUT
Adjust to the desired output level.
7
If desired, adjust the BASS, TREBLE, BALANCE and
LOUDNESS controls or turn on the CD DIRECT AMP
switch. (Refer to page 13).
AUX
TAPE
MD
CD
TUNER
PHONO
Note
If the TAPE MONITOR indicator is illuminated when you listen
to a source, press the TAPE MONITOR switch to turn off the
TAPE MONITOR indicator.
The indicator for the selected source lights up.
When you finish using this unit
Standby mode
Press the STANDBY/ON switch again to turn this unit into the
standby mode.
In this state, this unit consumes a very small quantity of
power to receive infrared-signals from the remote control
transmitter.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TO RECORD A SOURCE TO TAPE (OR MD)
1 4
NATURAL SOUND STEREO AMPLIFIER AX 392
SLEEP
AUX
TAPE
MD
CD
TUNER
PHONO
TAPE MONITOR
CD DIRECT AMP
INPUT
VOLUME
l6
20
l2
28
8
2
FLAT
0
0
0
STANDBY/ON
l
l
l
l
l
l
l
–
30dB
l0
2
2
2
2
2
2
2
3
3
3
9
40
4
3
3
3
3
4
4
4
4
4
4
4
8
5
5
5
5
L
5
5
R
5
7
6
60
BASS
TREBLE
BALANCE
LOUDNESS
0
–dB
PHONES
SPEAKERS
A
B
ON
OFF
1 2
1
2
Select the source you want to record.
3
4
Begin recording on the tape deck (or MD recorder etc.)
connected to this unit.
INPUT
If the tape deck connected to the TAPE terminals on the
rear of this unit is used for recording, you can monitor
the sounds being recorded by pressing the TAPE
MONITOR switch so that the TAPE MONITOR indicator
lights up.
AUX
TAPE
MD
CD
TUNER
PHONO
TAPE MONITOR
Lights up.
Play the source and then turn the VOLUME control up
to confirm the input source.
VOLUME
l6
20
l2
Note
28
8
VOLUME, BASS, TREBLE, BALANCE, LOUDNESS controls
and CD DIRECT AMP switch settings have no effect on the
material being recorded.
4
40
2
60
0
–dB
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the BALANCE control
Using the CD DIRECT AMP switch
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused from
speaker location or listening room conditions.
You can enjoy the purest possible CD sound from your CD
player by pressing this switch inward. By doing so, CD’s input
signals are sent to the built-in special amplifier for CD directly
bypassing the INPUT selector, the BASS, TREBLE,
BALANCE and LOUDNESS controls, and then sent to the
power amplifier. This signal routing reproduces the purest CD
sound eliminating any alterations to the CD signals.
0
l
l
2
2
3
3
4
4
L
5
5
R
CD DIRECT AMP
BALANCE
Adjusting the BASS and TREBLE
controls
Adjusting the continuously variable
LOUDNESS control
0
0
l
l
l
l
2
2
2
2
3
3
3
3
This control provides compensation for the human ears’ loss of
sensitivity to high and low-frequency ranges at low volume.
This control is adjustable to retain full tonal range at any
volume level.
4
4
4
4
5
5
5
5
BASS
TREBLE
BASS
: Turn this clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
FLAT
l
–
l0
30dB
1
2
3
9
Set to the “FLAT”
position.
4
8
5
7
6
TREBLE : Turn this clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
LOUDNESS
VOLUME
l6
20
l2
2
Selecting the SPEAKER system
28
60
8
Set to the loudest
listening level that you
would listen to.
Because one or two speaker systems can be connected to this
unit, the SPEAKERS switches allow you to select speaker
system A or B, or both at once.
4
40
2
0
–dB
SPEAKERS
A
B
ON
OFF
FLAT
l
–
30dB
2
l0
Turn until the desired
volume is gained.
3
3
9
4
8
5
7
6
LOUDNESS
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and
contact your authorized YAMAHA dealer or service center for help.
REMEDY
SYMPTOM
CAUSE
Firmly plug in the power cord.
The unit fails to turn on when the
STANDBY/ON switch is pressed, or turns
into the standby mode suddenly soon after
the power is turned on.
Power cord is not plugged in or is not
completely inserted.
Set the switch to either end closely.
The IMPEDANCE SELECTOR switch on the
rear panel is not set to either end closely.
Turn this unit into the standby mode and
disconnect the AC power cord from the AC
outlet. After about 30 seconds have passed,
connect the power and operate this unit again.
It happens that this unit does not work
normally.
There is an influence of strong external noise
(lightning, excessive static electricity, etc.) or a
misoperation on this unit while using this unit.
Connect the cords properly. If the problem
persists, the cords may be defective.
No sound.
Incorrect output cord connections.
Select an appropriate input source with the
INPUT selector.
Appropriate input source is not selected.
The SPEAKERS switches are not set properly.
Speaker connections are not secure.
Set the SPEAKERS switch which corresponds
to the speakers to be used to the ON position.
Secure the connections.
Turn this unit into the standby mode, and then
turn this unit on to reset the protection circuit.
The sound suddenly goes off.
The protection circuit has been activated
because of short circuit etc.
Cancel the SLEEP timer function.
Adjust it to the appropriate position.
The SLEEP timer has functioned.
Incorrect setting of the BALANCE control.
Incorrect cord connections.
Only one side speaker outputs the sound.
Connect the cords properly. If the problem
persists, the cords may be defective.
Connect the speaker wires in the correct phase
(+ and –).
There is a lack of bass, and no ambience.
Sound “hums”.
The + and – wires are connected in reverse at
the amplifier or speakers.
Firmly connect the audio plugs. If the problem
persists, the cords may be defective.
Incorrect cord connections.
Make the GND connection between the
turntable and this unit.
No connection from the turntable to the GND
terminal.
The player should be connected to the unit
through the MC head amplifier.
The volume level is low while playing a
record.
The record is being played on a turntable with
an MC cartridge.
Turn the power to the component on.
The volume level cannot be increased, or
sound is distorted.
The component connected to the REC terminals
of this unit is turned off.
Turn the power to this unit on.
The sound is degraded when listening with This unit is in the standby mode.
the headphones connected to the compact
disc player or tape deck that are connected
with this unit.
Set the LOUDNESS control to the FLAT
position.
Sound level is low.
The LOUDNESS control is functioning.
The CD DIRECT AMP switch is ON.
The CD DIRECT AMP switch is ON.
Switch off the CD DIRECT AMP switch.
The input source cannot be changed,
though the INPUT selector is turned.
The CD DIRECT AMP switch must be switched
OFF to use those controls.
Using the BASS, TREBLE, BALANCE and
LOUDNESS controls does not affect the
tone.
Change position of the main unit.
The remote control transmitter does not
work.
Direct sunlight or lighting (of an inverter type of
fluorescent lamp etc.) is striking the remote
control sensor of the main unit.
Replace the batteries with new ones.
The distance or range within which the
remote control transmitter can be used is
short.
The batteries of this remote control transmitter
are too weak.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Minimum RMS Output Power per Channel
Signal-to-Noise Ratio (IHF-A Network)
PHONO MM (5 mV Input Shorted)............................... 82 dB
CD/TUNER/AUX/MD/TAPE
8 ohms, 20 Hz to 20 kHz, 0.04% THD...................60W+60W
6 ohms, 20 Hz to 20 kHz, 0.08% THD...................70W+70W
(Shorted, CD DIRECT AMP: ON)............................... 108 dB
Maximum Output Power (6 ohms, 1 kHz, 10% THD)
[China and General models only]..................................110W
Residual Noise (IHF-A Network)
CD DIRECT AMP: ON.................................................. 35 µV
CD DIRECT AMP: OFF.............................................. 100 µV
Dynamic Power per Channel
(by IHF Dynamic Headroom measuring method)
8/6/4/2 ohms.............................................100/120/140/150W
Channel Separation
CD/TUNER/AUX/MD/TAPE (Input 5.1 k-ohms Terminated
1 kHz)............................................................................60 dB
DIN Standard Output Power per Channel
(4 ohms, 1 kHz, 0.7% THD)
[U.K. and Europe models only]........................................95W
Tone Control Characteristics
BASS:
IEC Power (8 ohms, 1 kHz, 0.04% THD)
Boost/cut....................................................±10 dB (20 Hz)
Turnover Frequency................................................350 Hz
TREBLE:
[U.K. and Europe models only]........................................75W
Power Band Width
Boost/cut ..................................................±10 dB (20 kHz)
Turnover Frequency...............................................3.5 kHz
8 ohms, 30W, 0.1% THD ..............................10 Hz to 50 kHz
Damping Factor
Continuously variable LOUDNESS Control
(Level related equalization)
8 ohms, 20 Hz to 20 kHz.....................................100 or more
Attenuation..................................................... –30 dB (1 kHz)
Input Sensitivity/Impedance
PHONO MM ..............................................2.5 mV/47 k-ohms
CD/TUNER/AUX/MD/TAPE........................150 mV/47 k-ohms
Power Supply
[U.K. and Europe models].............................AC 230V, 50 Hz
[China and General models]
Maximum Input Signal (1 kHz, 0.04% THD)
............................................AC 110/120/220/240V, 60/50 Hz
PHONO MM .................................................................90 mV
Power Consumption
Output Level/Impedance
[U.K. and Europe models] .............................................150W
(In the standby mode: 1.2W)
PHONO MM to REC OUT ..........................150 mV/1 k-ohms
[China and General models]..........................................150W
(In the standby mode: 1.8W)
Headphone Jack Rated Output/ Impedance
Output Level (8 ohms, 1 kHz, 0.04% THD)...................0.31V
Impedance ..............................................................560 ohms
AC Outlets
3 SWITCHED OUTLETS
Frequency Response (20 Hz to 20 kHz)
[Europe, China and General models].......100W max. total
1 SWITCHED OUTLET
CD/TUNER/AUX/MD/TAPE .......................................0±0.5 dB
[U.K. model]..............................................100W max. total
RIAA Equalization Deviation
PHONO MM .............................................................0±0.5 dB
Dimensions (W x H x D) ..........................435 x 151 x 309.3 mm
(17-1/8” x 5-15/16” x 12-3/16”)
Total Harmonic Distortion (20 Hz to 20 kHz)
PHONO MM to REC OUT (1V) ....................................0.02%
CD/TUNER/AUX/MD/TAPE to SP OUT (30W/8 ohms)
......................................................................................0.02%
Weight.......................................................7.6 kg (16 lbs. 12 oz.)
Accessories.......................................Remote control transmitter
Batteries
Specifications subject to change without notice.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B.
J
A
WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VZ85100
Download from Www.Somanuals.com. All Manuals Search And Download.
|