B G L R
Home Theater Compact System
Salle de cinéma domestique compacte
Home Theater Kompaktanlage
Kompakt anläggning av Home Theater-typ
Sistema compatto di sala cinematografica ad uso domestico
Sistema compacto del Cine en el Hogar
Thuis Theater Compact Systeem
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
PUSH OPEN
/
CINEMA DSP
OPEN
/
CLOSE
CD
TUNER
TAPE
/MD
VCR
VIDEO 1
VIDEO 2
VOLUME
POWER
Active Servo
Technology
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
INTRODUCTION
Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For
the best performance, read this manual carefully. It will guide you in operating your YAMAHA product.
A Brief Guide to Proper Use of This System and
The Owner’s Manual
The following procedure shows you how to begin using this system and the
owner’s manual from the time just after you bought this system.
1. Unpack the package, and check the contents. (Refer to the inside of the cover and
page 6.)
2. Read “PRECAUTIONS” on this manual (on pages 3 to 5) first of all.
3. To understand this system, see pages 6 to 8.
4. Position and install all units in this system (see pages 9 to 11), and then make
connections (see pages 12 to 17).
Do not plug in this system until all connections are completed.
5. Before listening to a source, make some adjustments. (See pages 24 to 27.)
6. Begin listening to a source. (See pages 28 to 29.)
● To listen to a compact disc, see pages 30 to 32.
● To listen to a radio program, see pages 33 to 37.
(For U.K. and Europe models only, see pages 33 to 43.)
● To listen to or watch a source played on an external unit, see page 44.
7. To enjoy listening to a source with surround sound effects, see pages 45 to 48.
● To use the built-in timer, see pages 49 to 51.
● If you want to know the function of a button, switch or indicator, see pages 18 to 23.
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Page
Page
PRECAUTIONS
ENJOYING LISTENING TO A SOURCE
PRECAUTIONS ........................................................3-4
BASIC LISTENING OPERATIONS ......................28-29
NOTES ABOUT THE REMOTE CONTROL
TRANSMITTER............................................................5
LISTENING TO A COMPACT DISC
COMPACT DISC PLAYER OPERATION.............30-32
OUTLINE OF THIS SYSTEM
LISTENING TO A RADIO PROGRAM
SYSTEM CONFIGURATION .......................................6
TUNING OPERATION ..........................................33-37
FEATURES ..................................................................7
DIGITAL SOUND FIELD PROCESSOR (DSP)...........8
RECEIVING RDS STATIONS
U.K. and Europe models only
<
>
RECEIVING RDS STATIONS
<U.K. and Europe models only>.......................38-43
SETTING UP THE SPEAKERS
SETTING UP THE SPEAKERS..............................9-11
LISTENING TO A SOURCE ON AN EXTERNAL UNIT
CONNECTIONS
OPERATING EXTERNAL UNITS
CONNECTED WITH THIS SYSTEM..........................44
CONNECTIONS....................................................12-17
CONTROLS AND THEIR FUNCTIONS
USING DIGITAL SOUND FIELD PROCESSOR (DSP)
CONTROLS AND THEIR FUNCTIONS................18-23
USING DIGITAL SOUND FIELD PROCESSOR
(DSP).....................................................................45-48
TURNING THE POWER TO THIS SYSTEM ON
OR IN THE STANDBY MODE
HOW TO USE THE BUILT-IN TIMER
TURNING THE POWER TO THIS SYSTEM ON
OR IN THE STANDBY MODE ...................................24
TIMER PLAY.........................................................49-50
SLEEP TIMER OPERATION .....................................51
ADJUSTMENTS BEFORE LISTENING OPERATIONS
SETTING THE CLOCK..............................................25
TROUBLESHOOTING
TROUBLESHOOTING...............................................52
ADJUSTING BRIGHTNESS OF THE DISPLAY .......25
SPEAKER BALANCE ADJUSTMENT.................26-27
SPECIFICATIONS
SPECIFICATIONS ................................................53-54
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
PRECAUTIONS: READ THIS BEFORE OPERATING THIS SYSTEM
■ To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
■ To prevent lightning damage, disconnect the AC
power plug and the antenna cable when there is an
electrical storm.
■ Choose the installation location of this unit carefully.
Avoid placing it in direct sunlight or close to a source
of heat. Also avoid locations subject to vibration and
excessive dust, heat, cold or moisture. Keep it away
from sources of hum such as transformers and
electric motors.
■ Do not plug the AC power plug to the wall socket
before you finish all connections.
■ The voltage to be used must be the same as that
specified on this unit. Using this unit with a higher
voltage than that which is specified is dangerous and
may result in a fire or other type of accident causing
damage. YAMAHA will not be held responsible for
any damage resulting from use of this unit with a
voltage other than that which is specified.
■ Do not operate this unit upside-down. It may
overheat, possibly causing damage.
■ Never open the cabinet. If something drops into the
set, contact your dealer.
■ The sound level at a given volume setting depends
on speaker location and other factors. Care should
be taken to avoid exposure to sudden high levels of
sound, which may occur when turning on the unit
with the volume setting at high, and to continuous
high levels of sound.
■ The openings on the surface of the power
amplifier/subwoofer unit assure proper ventilation of
the unit. If these openings are obstructed, the
temperature inside the unit will rise rapidly.
Therefore, avoid placing objects against these
openings, and install the unit in well-ventilated
condition. Make sure to allow a space of at least 10
cm behind, 10 cm on the both sides and 20 cm
above the top panel of the unit, and never use the
unit with the unit laid down on the floor. Otherwise it
may not only damage the unit, but also cause fire.
■ Sudden temperature changes and storage or
operation in an extremely humid environment may
cause condensation inside the unit.
Condensation can cause the unit to malfunction.
To eliminate condensation:
CD pickup
•
•
■ Always make the volume setting to minimum before
starting an audio source play: increase the volume
gradually to an appropriate level after play has
started.
Leave the power on with no disc in the unit until
normal playback is possible (about 1 hour).
Remote control
Wipe off condensation on the transmitter window
with a soft cloth before operating the unit.
■ When not planning to use this unit for long periods of
time (ie., vacation, etc.), disconnect the AC power
plug from the wall outlet.
■ Secure placement or installation is the owner’s
responsibility.
YAMAHA shall not be liable for any accident
caused by improper placement or installation of
this system.
■ Grounding or polarization – Precautions should be
taken so that the grounding or polarization of the unit
is not defeated.
IMPORTANT
Please record the serial number of this unit in the
space below.
■ Do not use force on switches, controls or connection
wires. When moving the unit, first disconnect the
power plug and the wires connected to other
equipment. Never pull the wire itself.
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
■ Do not attempt to clean the unit with chemical
solvents; this might damage the finish. Use a clean,
dry cloth.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
■ Be sure to read the “TROUBLESHOOTING” section
regarding common operating errors before
concluding that the unit is faulty.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
CAUTION (FOR CANADA MODEL)
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT AND FULLY
INSERT.
VOLTAGE SELECTOR (General model only)
The voltage selector on bottom of the power
amplifier/subwoofer (SW-AV1) must be set for
your local main voltage BEFORE plugging into
the AC main supply.
FOR CANADIAN CUSTOMER
Voltages are 110/120/220/240V AC, 50/60 Hz.
THIS CLASS B DIGITAL APPARATUS MEETS ALL
REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT
REGULATIONS.
VOLTAGE
SELECTOR
240V
NOTE
Please check the copyright laws in your country to
record from records, compact discs, radio, etc.
Recording of copyright material may infringe
copyright laws.
WARNING
To reduce the risk of fire or electric shock, do not
expose this unit to rain or moisture.
For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off
and an appropriate 3 pin plug fitted. For details, refer to
the instructions described below.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is
hazardous if engaged in a live socket outlet.
CAUTION 1
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT:
The wire in the mains lead are coloured in
accordance with the following code:
CAUTION 2
As the laser beam used in this unit is harmful to the
eyes, do not attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
Blue: NEUTRAL
Brown: LIVE
The colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug.
Proceed as follows: the wire which is coloured BLUE
must be connected to the terminal which is marked
with the letter N or coloured BLACK. The wire which
is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured
RED. Making sure that neither core is connected to
the earth terminal of the three pin plug.
This unit is classified as a
CLASS 1 LASER product.
The CLASS 1 LASER
PRODUCT label is located
on the rear exterior.
CLASS 1 LASER PRODUCT
Laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
Laser Diode Properties
Material: GaAlAs
Wavelength: 780nm
•
Emission Duration: continuous
This system is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this system itself is turned off.
•
•
Laser Output: max. 44.6µW*
•
In this state, this system is designed to consume a
very small quantity of power.
* This output is the value measured at a distance of
about 200mm from the objective lens surface on the
Optical Pick-up Block.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Loading the batteries for the
remote control transmitter
Proper use of the remote control
transmitter
1
PUSH OPEN
/
POWER
MINI COMPONENT SYSTEM AV–1
OPE
OSE
CD
TUNER
TAPE/MD
VCR
VIDEO
1
VIDEO
2
VOLUME
3
2
Remote control sensor
Within approximately
6 m (19.7 feet)
1 Remove the battery compartment cover.
(Slide the cover in the direction of the arrow.)
2 Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or
equivalent) into the battery compartment.
* Installing the batteries improperly may cause
failure.
Aim (within the range of 60° with no obstacles) the
remote control transmitter at the remote control sensor
and operate as shown.
3 Replace the battery compartment cover.
Notes concerning use
Precautions for battery use
Replace the batteries if control distance decreases
or operation becomes unstable.
Periodically clean the transmitter window on the
remote control transmitter and the sensor on the
main unit with a soft cloth.
Exposing the sensor on the main unit to strong light
(especially an inverter type of fluorescent lamp etc.)
may interfere with operation. In this case, reposition
the main unit to avoid direct lighting.
•
Insert the batteries according to the direction
indicated in the battery compartment.
Replace all batteries with new ones at the same
time.
•
•
•
•
•
Remove the batteries if they are weak or if the unit is
not in use for long periods.
•
Don’t mix normal batteries with rechargeable
batteries.
Keep the remote control transmitter away from
moisture, excessive heat, shock and vibrations.
The remote control transmitter’s usable range is
within 0.2m (8”) and 6m (20’) away from the sensor.
•
•
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
OUTLINE OF THIS SYSTEM
SYSTEM CONFIGURATION
This system is a multi-channel audio system which consists of the units shown below.
By driving 6 speakers, the built-in digital sound field processor (DSP) creates various kinds of Yamaha original digital
sound fields simulating an actual concert hall, live house, etc. When watching a movie source, the built-in Dolby Pro
Logic Surround decoder and the digital sound field processor turns your room into a movie theater with tremendous
impact.
Ultralow bass reproduced by the subwoofer (SW-AV1) makes sound more real and more powerful.
The built-in CD player and tuner provide you with effortless operation and high performance.
You will be given great enjoyment in listening to music and watching TV with this system.
SW-AV1
(6 channel power amplifier
and Active Servo Processing
Subwoofer system)
6CH POWER AMPLIFIER
ACTIVE SERVO PROCESSING SUBWOOFER
Active Servo
Technology
NX-AV1
(Full range speakers used for front,
center and rear speakers)
TCD-AV1
(Main control unit
including Tuner, CD
player and Digital Sound
Field Processor)
PUSH OPEN
/
OPEN/
CLOSE
CD
TUNER
TAPE
/MD
VCR
VIDEO
1
VIDEO
2
VOLUME
POWER
MINI COMPONENT SYSTEM AV–1
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
OUTLINE OF THIS SYSTEM
FEATURES
The System
Compact Disc Player
● 6 Speaker Multi-Channel Audio
System Including Two Front
● Single Track/Entire Disc Repeat Play
Speakers, One Center Speaker, Two
Rear Speakers and One Subwoofer
Tuner
● Minimum RMS Output Power per
● 40 Station Random Access Preset
Channel
Tuning
Front L, R: 30W + 30W (6Ω) RMS
Output Power, 10% THD,
1 kHz
● 40 Station Automatic Preset Tuning
<Europe and U.K. models only>
● Multi-Functions for RDS Broadcast
Reception
Center
:
30W (6Ω) RMS Output
Power, 10% THD, 1 kHz
Rear L, R: 30W + 30W (6Ω) RMS
Output Power, 10% THD, 1
kHz
Sound Field Processor Including
Dolby Pro Logic Surround
Decoder
Subwoofer: 50W (4Ω) RMS Output
Power, 10% THD, 100 Hz
● Digital Sound Field Processor
(Programs: STADIUM, DISCO,
CONCERT HALL, ROCK CONCERT,
MONO MOVIE, CONCERT VIDEO)
● Active Servo Processing Subwoofer
System for Super Low Bass
Reproducing (SW-AV1)
● Simple and Easy Operating Methods
● Dolby Pro Logic Surround Decoder
● Direct Playback by a Simple
(Program: DOLBY PRO LOGIC)
Operation
● CINEMA DSP:
● Automatic Function to Turn the
Theater-like Sound Experience by the
Combination of Dolby Pro Logic and
YAMAHA DSP Technology
(Program: DOLBY PRO LOGIC
ENHANCED)
System into the Standby Mode
● Adjustable Display Brightness
● Multi-Use Timer/Sleep Timer
● Automatic Input Balance Control for
● 5 External Audio/Video Component
Dolby Pro Logic Surround
Connecting Capability
● Test Tone Generator for Easier
● On Screen Display Function (Displays
Volume Setting, Speaker Balance
Adjustment, Program Names, etc. on
the TV Monitor)
Speaker Balance Adjustment
● Remote Control Capability
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
OUTLINE OF THIS SYSTEM
DIGITAL SOUND FIELD PROCESSOR (DSP)
The Digital Sound Field Processor (DSP) built into this system takes advantage of Yamaha’s undisputed leadership in
the field of digital audio processing to bring you a whole new world of listening experiences. Follow the instructions in
this manual carefully when setting up your system, and this unit will sonically transform your room into a wide range of
listening environments –movie theater, concert hall, and so on. In addition, you get incredible realism from sources
encoded with Dolby Surround using the built-in Dolby Pro Logic Surround Decoder.
Please read this operation manual carefully and store it in a safe place for later reference.
Digital Sound Field Processing
What is it that makes live music so good? Today’s
advanced sound reproduction technology lets you get
extremely close to the sound of a live performance, but
chances are you’ll still notice something missing: the
acoustic environment of the live concert hall. Extensive
research into the exact nature of the sonic reflections
that create the ambience of a large hall has made it
possible for Yamaha engineers to bring you this same
sound in your own listening room, so you’ll feel all the
sound of a live concert.
Furthermore, our technicians, armed with sophisticated
measuring equipment, have even made it possible to
capture the acoustics of a variety of venues such as an
actual concert hall, theater, etc. to allow you to
accurately recreate one of several actual live
performance environments, all in your own home.
Dolby Pro Logic Surround
This unit employs a Dolby Pro Logic Surround decoder
similar to professional Dolby Stereo decoders used in
many movie theaters. By using the Dolby Pro Logic
Surround decoder, you can experience the dramatic
realism and impact of Dolby Surround movie theater
sound in your own home. Dolby Pro Logic employs a
four channel five speaker system. The Pro Logic
Surround system divides the input signal into four levels:
the left and right main channels, the center channel
(used for dialog), and the rear surround sound channels
(used for sound effects, background noise, and other
ambient noises). The center channel allows listeners
seated in even less-than-ideal positions to hear the
dialog originating from the action on the screen while
experiencing good stereo imaging.
Surround on this unit, the Dolby Pro Logic Surround
decoder decodes the signal and distributes the
surround-sound effects.
This Dolby Pro Logic Surround Decoder employs a
digital signal processing system. This system improves
the stability of sound at each channel and minimizes
crosstalk between channels, so that positioning of
sounds around the room is more accurate compared
with conventional analog signal processing systems.
In addition, this unit features a built-in automatic input
balance control. This always assures you the best
performance without manual adjustment.
Manufactured under license from Dolby Laboratories
Licensing Corporation. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby Laboratories
Licensing Corporation.
Dolby Surround is encoded on the sound track of pre-
recorded video tapes, laser discs, and some TV/cable
broadcasts. When you play a source encoded with Dolby
Dolby Pro Logic Surround + DSP
Dolby Surround sound system shows its full ability in a
large movie theater, because movie sounds are
originally designed to be reproduced in a large movie
theater using many speakers. It is difficult to create a
sound environment similar to that of a movie theater in
your listening room, because the room size, materials of
inside walls, the number of speakers, etc. of your
listening room is much different from those of a movie
theater.
listening room with its original digital sound fields
combined with Dolby Surround sound field.
The combination of Dolby Pro Logic Surround and DSP
is used on the sound field program “ PRO LOGIC
ENHANCED”.
CINEMA DSP
The YAMAHA “CINEMA DSP” logo indicates these
programs are created by the combination of Dolby Pro
Logic and YAMAHA DSP technology.
Yamaha DSP technology made it possible to present
you with nearly the same sound experience as that of a
large movie theater in your listening room by
compensating for lack of presence and dynamics in your
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE SPEAKERS
SETTING UP THE SPEAKERS
Before you make connections, place all units in this system in their proper positions respectively. Above all, the
positioning of speakers are important, because it controls the whole sound quality of this system.
Position the speakers on the basis of your listening position by following instructions on this section.
Speaker configuration
Front L
Center
Front R
This system employs a 6 speaker configuration: 2 front
speakers, 2 rear speakers, a center speaker and a
subwoofer.
Subwoofer
The front speakers are used for the main source sound
plus the effect sounds. The rear speakers are used for
the effect and surround sounds, and the center speaker
is for the center sounds (dialog etc.). The subwoofer is
for reinforcing low frequencies of the main source sound
and the center sounds.
Rear L
Rear R
Placing speakers
Front speakers: On both sides of the TV and in
almost the same height as the TV.
Rear speakers: Behind your listening position,
facing slightly inward. Nearly six
feet (approx. 1.8 m) up from the
floor.
Front R
Center
Front L
Subwoofer
Center speaker: Precisely between the front
speakers.
TV set
Subwoofer:
The position of the subwoofer is not
so critical because low bass tones
are not highly directional.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE SPEAKERS
■ Mounting the front and center
1
speakers
Place the front speakers on a rack or on a shelf, and
place the center speaker on top of the TV or on a shelf
or inside the TV rack so that it is stabilized.
To obtain more stability and usefulness, we recommend
that you mount those speakers on the provided
mounting brackets (type A).
Mounting
bracket
(type A)
To mount speakers on the mounting
brackets (type A)
1 Attach the bracket to bottom of the speaker by using
the provided screw (type A).
Screw
(type A)
2 Turn and/or slide the speaker on the bracket
according as you desire, and after that, tighten the
screw.
2
1
Note
Though this speaker is a magnetically shielded
type, there may be some influence on a TV picture
depending on the type of TV or the placement of the
speaker. In such a case, place the speaker apart
from the TV so that there is no influence on TV
picture.
■ Mounting the rear speakers
Mount the rear speakers on a shelf, rack or on the floor
directly, or hang them on the wall.
Mounting
bracket
(type B)
To mount the rear speakers on a wall by
using the provided mounting brackets (type
B)
Note
It is recommended that you connect the speaker cords
to the speaker’s terminals before attaching the bracket
to the speaker.
Screw
(type B)
1 Attach the bracket to bottom of the speaker by using
the provided screw (type B).
2
2 Turn and/or slide the speaker on the bracket
according as you desire, and after that, tighten the
screw.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP THE SPEAKERS
3 Fasten screws into a firm wall or wall support as
shown in the figure, and hang the holes of the
mounting bracket on the protruding screws.
* Make sure that the screws are caught by a narrow
part of the holes securely.
3
Tapping screw
(Available at the
hardware store)
Note
If desired, you can hang the speaker on the protruding
screws on the wall without using the bracket.
WARNING:
● Each speaker weighs 0.7 kg (1 lbs. 9 oz.). Do not
mount them on thin plywood or soft wall surface
material, as the screws may come out of the
flimsy surface, causing the speakers to fall down
and be damaged, or result in personal injury.
● Do not fasten the speakers to wall with nails,
adhesives, or other unsound hardware. Long-
term use and vibrations may cause them to fall
down.
● To avoid accidents resulting from tripping over
loose speaker cords, fix them to the wall.
● Select a proper position on the wall to mount the
speaker and the bracket so that no one will hit
his head or face on the sticking part of the
bracket, resulting in personal injury.
Min.
12 mm
Mounting
bracket
(type B)
■ If you want to mount the speaker
on a commercially available
speaker stand
Mounting
bracket
(type C)
The provided mounting bracket (type C) which has 1
pair of screw holes (at an interval of 60 mm) are
available to mount the speaker on a speaker stand.
*
Those screw holes can be used with M4 screws
only.
1 Attach the bracket to bottom of the speaker by using
the provided screw (type A) so that the convex part
of the bracket fits in grooved part on bottom of the
speaker as figured left.
Screw
(type A)
2 Mount the speaker on the speaker stand by using
the screw holes on the bracket.
Note
The mounting bracket (type C) is provided for each of 5
speakers.
60 mm
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTIONS
When you have finished placing or installing all units in this system, begin making connections by following
instructions on this section.
This system needs 6 kinds of connections: system connection, speaker connection, antenna connection and external
unit connection, however the order of them is not important.
Never plug the AC supply lead of this system into the AC outlet until all connections are
completed.
■ Making a system connection between the main control unit (TCD-AV1) and
the power amplifier/subwoofer (SW-AV1)
1 Connect the SYSTEM CONNECTOR terminals on
both units with each other by using the provided
system connector cable.
2 Connect the AUDIO OUTPUT terminals on TCD-
AV1 to the INPUT terminals on SW-AV1 by using
the provided connection cord.
* When connecting the system connector cable to
both terminals, take notice of the directions of
each SYSTEM CONNECTOR terminal’s face.
* Make sure to connect the red plug of the
connection cord to the “R” (right) terminal and
connect the white plug to the “L” terminal.
Power amplifier/subwoofer
(SW-AV1)
L
L
MARK
R
SYSTEM
CONNECTOR
INPUT
R
L
R
C
L
FROM TCD–AV1
FRONT
REAR
CENTER
REAR
MARK
R
SYSTEM
1
INPUT
CONNECTOR
FROM TCD–AV1
System
connector
cable
2
(provided)
Audio
connection
cord
(provided)
TO SW-AV1
MARK
Caution
Be careful not to damage
the system connector
cable by placing
SYSTEM
AUDIO
CONNECTOR
OUTPUT
something heavy on the
cable, by fixing metal
fittings on the cable, by
tugging the cable, and so
on. Damaging the cable
will lead this system to a
breakdown.
Main control unit (TCD-AV1)
ANTENNA
MONITOR OUT
VIDEO
SIGNAL
FM
75
Ω
UNBAL.
GND
AM
TO SW-AV1
MARK
IN
VIDEO
OUT
IN
OUT
TAPE/MD
IN
SYSTEM
AUDIO
1
VCR
CONNECTOR
OUTPUT
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
■ Connecting the speakers (NX-AV1) to the power amplifier/subwoofer
(SW-AV1)
Right front speaker
Left front speaker
Right rear speaker
Center speaker
Left rear speaker
R L
R C L
FRONT
REAR
CENTER
REAR
L
MARK
R
SYSTEM
INPUT
CONNECTOR
R
L
R
C
L
REAR
FROM TCD–AV1
FRONT
REAR
CENTER
Power amplifier/subwoofer
(SW-AV1)
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connect the provided speakers (NX-AV1) to the
SPEAKERS terminals on the rear of SW-AV1.
How to Connect:
Connect the provided speaker cords between the
SPEAKERS terminals on the power
amplifier/subwoofer (SW-AV1) and the speaker
terminals on each speaker (NX-AV1) properly as
shown below. If the connections are faulty, no sound
will be heard from the speakers. Make sure that the
polarity of the speaker wires is correct, that is the + and
– markings are observed. If these wires are reversed,
the sound will be unnatural and lack bass.
All of the speakers (NX-AV1) are identical.
The speakers connected to the FRONT R and L
terminals should be used as the right and left front
speakers.
The speaker connected to the CENTER terminal
should be used as the center speaker.
The speakers connected to the REAR R and L
terminals should be used as the right and left rear
speakers.
As a sure method, connect the wire with a silver line to
the + terminals on both the power amplifier/subwoofer
(SW-AV1) and speaker, and connect the wire with no
line to the – terminals on both of them.
Notes
● Do not connect speakers other than the provided
ones to SW-AV1.
● Use the provided speaker cords for the connections.
Normally, use the short cords to connect with the
front and center speakers, and use the long ones to
connect with the rear speakers.
Caution
Do not let the bare speaker wires touch each other
as this could damage SW-AV1 and/or speakers.
On SW-AV1:
● The provided tag sheet for speaker cords is useful
for preventing wrong connections between speakers
and SW-AV1.
Red: positive (+)
Black: negative (–)
L
Press up the tab.
Insert the bare wire.
[Remove approx.
➀
➁
➀
FORNT
5mm (1/4”)
insulation from the
speaker wires.]
Press down the tab
and secure the
wire.
➂
➁
➂
On NX-AV1:
Red: positive (+)
Black: negative (–)
Press the tab.
➀
➁
Insert the bare wire.
[Remove approx.
5mm (1/4”)
insulation from the
speaker wires.]
Release the tab and
secure the wire.
➂
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
■ Antenna connection
(1) Supplied FM antenna
(1)
Connect the FM antenna wire to the corresponding
terminal and direct the FM antenna wire to the direction
where the strongest signal can be received.
ANTENNA
(2) Supplied AM (MW/LW) loop antenna
FM
75
Ω
UNBAL.
GND
AM
Connect the AM (MW/LW) loop antenna wires to the
corresponding terminals. Position the AM (MW/LW)
loop antenna for optimum reception. Place the AM
(MW/LW) loop antenna on a shelf etc., or install it on
the rack or wall with screws (not provided).
(2)
Notes
When static is still heard even after adjusting the
position of the AM (MW/LW) loop antenna, try
reversing the wire connections (right to left).
Do not place the AM (MW/LW) loop antenna on the
unit. It will result in noise generation, since the unit
is equipped with digital electronics. Place the AM
(MW/LW) loop antenna away from the unit.
•
•
(3) External FM antenna
ANTENNA
Use an external FM antenna instead of an indoor FM
antenna if you need better reception. Consult your
dealer.
FM
75Ω
UNBAL.
GND
AM
(4) External AM (MW/LW) antenna
Use an external AM (MW/LW) antenna if you need
better reception. Consult your dealer.
Note
15 m (49 feet)
When using an external AM (MW/LW) antenna, be
sure to keep the wire of the AM (MW/LW) loop antenna
connected.
(4)
(3)
7.5 m (25 feet)
Earth rod
ANTENNA
or
FM
75
Ω
UNBAL.
GND
AM
ANTENNA
MONITOR OUT
VIDEO
SIGNAL
FM
75
Ω
UNBAL.
GND
AM
TO SW-AV1
MARK
IN
OUTPUT VIDEO
OUT
IN
VCR
OUT IN
TAPE/MD
SYSTEM
CONNECTOR
AUDIO
1
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
■ Connecting external components
This system can be connected with external audio and video components. Make connections between this system
and other components using RCA pin plug connector cables correctly, that is to say L (left) to L and R (right) to R.
Also, refer to the owner’s manual for each component to be connected to this system.
Monitor TV
Video cassette recorder
VIDEO IN
Main control unit
(TCD-AV1)
ANTENNA
MONITOR O
VIDEO
SIGNAL
FM
75
Ω
UNBAL.
GND
AM
TO SW-AV1
MARK
IN
VIDEO 1
OUT
IN
OUT
TAPEMD
IN
SYSTEM
AUDIO
VCR
CONNECTOR
OUTPU
LD player, etc.
Tape deck, MD recorder, etc.
Main control unit (TCD-AV1)
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
HOUR
MIN
PHONES
/
OPEN/
CLOSE
CD
TUNER
TAPE/
MD
VCR
VIDEO
1
VIDEO
2
VOLUME
POWER
VIDEO 2
VIDEO
L
AUDIO
R
AUDIO OUT R
AUDIO OUT L
R
L
VIDEO OUT
VIDEO
Camcorder, etc.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
For General model only
FREQUENCY STEP switch
TV MODE switch
Because the interstation frequency spacing differs in
different areas, set the FREQUENCY STEP switch
(located at the rear) according to the frequency
spacing in your area. Before setting this switch,
disconnect the AC supply lead of this unit from the AC
outlet.
This system is designed for use with the NTSC and
PAL television formats. Set this switch to the position
for the format your monitor TV employs.
PAL: Outputs signals in the PAL format no matter
which format (PAL or NTSC) of video signal is
sent from an external video unit to this system.
Set to this position if your monitor TV employs
the PAL format.
FM:100/50
AM: 10 /9kHz
AUTO
PAL NTSC
Note: In this position, the On Screen Display
function of this system will not work unless a
video signal is input to this system.
QUENCY
STEP
TV
MODE
AUTO: Outputs signals in the same format as the
video signal input to this system employs.
Set to this position if your monitor TV can be
switched in between the PAL and NTSC
formats automatically.
ANTENNA
MONITOR OUT
VIDEO
SIGNAL
FM
75
Ω
UNBAL.
AUTO
GND
AM
TO SW-AV1
MARK
FM:100/50
AM: 10 /9kHz PAL NTSC
IN
VIDEO
OUT IN
VCR
OUT IN
TAPE/MD
SYSTEM
AUDIO
FREQUENCY TV
CONNECTOR
OUTPUT
1
STEP
MODE
NTSC: Outputs signals in the NTSC format no matter
which format (PAL or NTSC) of video signal is
sent from an external video unit to this sytem.
Set to this position if your monitor TV employs
the NTSC format.
Note
Make sure to input a video signal which employs the
same format that your monitor TV employs, otherwise
a picture will not be played back normally.
■ Connecting the AC supply lead
After completing all connections, plug the AC supply
lead into a convenient AC outlet.
Unplug the AC supply lead from the AC outlet if this
system is not to be used for a long period of time.
•
•
General model only
L
MARK
R
SYSTEM
CONNECTOR
INPUT
VOLTAGE
SELECTOR
R
L
R
C
L
FROM TCD–AV1
FRONT
REAR
CENTER
REAR
VOLTAGE SELECTOR (General model only)
The voltage selector on bottom of the power
amplifier/subwoofer (SW-AV1) must be set for
your local main voltage BEFORE plugging into
the AC main supply.
240V
Voltages are 110/120/220/240V AC, 50/60 Hz.
To AC outlet
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND THEIR FUNCTIONS
CONTROLS AND THEIR FUNCTIONS
FRONT PANEL
1
2
3
4
5
PUSH OPEN
/
OPEN
/
CLOSE
CD
TUNER
TAPE/MD
VCR
VIDEO 1
VIDEO 2
VOLUME
POWER
MINI COMPONENT SYSTEM AV–1
6
7
8
9
0
A
B C
D E
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO 2
TIME ADJ
TIMER
/
/
REPEAT
HOUR
RDS MODE
MIN
RDS START
PHONES
FREQ PS/PTY/RT/CT
F
G H
I
Letters in the shaded area (
) are
printed on U.K. and Europe models only.
1 POWER switch
Press this switch to switch the power on. Press it again
to switch this system into the standby mode.
5 Input selector buttons
Select a program source to listen to or watch. When a
button is pressed, the name of selected source appears
on the display.
2 Disc tray
If this system is in the standby mode, pressing one of
these buttons turns this system on and selects the
corresponding input source.
When you will play back a compact disc, load the disc
on this tray. When the CD playback is finished, unload
the disc from this tray. Open and close this tray by
pressing the OPEN/CLOSE button.
6 Control door
See page 20 for how to open and close the control door.
3 Remote control sensor
Receives signals from the remote control transmitter.
7 OPEN/CLOSE button
Opens and closes the disc tray.
4 Display panel
Shows various information. (Refer to page 21 for
details.)
If this system is in the standby mode, pressing this
button turns this system on, then selects the CD player,
and then opens the disc tray.
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND THEIR FUNCTIONS
8 CD input selector button [ (Stop),
(play/pause)]
When an input source other than the built-in CD player
is selected, pressing this button selects the CD player
as an input source and starts playback if a disc is
loaded on the disc tray.
/
B MEMORY button
This button is available when the tuner is selected.
When this button is pressed, “MEMORY” flashes on the
display for about 5 seconds. During this period, select
a desired preset station number by pressing the
TUNER “ ” or “ ” button on the front panel (or the
PRESET station number selector “ ” or “ ” button
on the remote control transmitter) and press the
MEMORY button again to enter the displayed station
into the memory.
While playing back a disc, pressing the lower side
(
/
) of this button pauses the playback. Pressing
the lower side again resumes the playback.
While playing back a disc, pressing the upper side (
stops the play.
)
When this button is pressed and held for about 2
seconds, the automatic preset tuning begins. (Refer to
page 37 for details.)
9 TUNER input selector button
[
(up)/
(down)]
When an input source other than the built-in tuner is
selected, pressing this button selects the tuner as an
input source.
TIME ADJ
This button is also used for setting the built-in clock.
(See page 25 for details.)
When the tuner is in the automatic or manual tuning
mode, this button is used for tuning search. Pressing
the upper side ( ) makes a tuning search to higher
frequencies, and pressing the lower side ( ) makes a
tuning search to lower frequencies.
When the tuner is in the preset tuning mode, this button
is used for selecting a preset station number. Pressing
the upper side ( ) selects a higher preset station
number and pressing the lower side ( ) selects a
lower preset station number.
C AUTO/MAN’L button
Press this button to switch the tuning mode to
automatic or manual. To select the automatic tuning
mode, press this button so that “AUTO” lights up on the
display. To select the manual tuning mode, press this
button so that “AUTO” goes off.
TIMER
This button is also used for setting the built-in timer.
(See pages 49 to 50 for details.)
<For U.K. and Europe models only>
When the tuner is in the PTY SEEK mode, pressing
this button changes the currently selected program
type.
D PRESET/BAND button
Whenever this button is pressed, the mode of tuner is
changed to the FM band reception mode, AM band
reception mode and the preset tuning mode in turn.
0 VOLUME button [ (up)/ (down)]
Pressing the upper side ( ) raises and pressing the
lower ( ) side lowers the volume of whole sound
output of this system.
<For U.K. and Europe models only>
The mode of tuner is changed to the FM mode, MW
mode, LW mode and the preset tuning mode in turn.
A PHONES jack
E DISPLAY button
When you listen with headphones, connect the
headphones to the PHONES jack. You can listen to the
sound to be output from the front speakers through
headphones.
Used for setting the built-in clock, timer, etc. (See
pages 25 and 49 to 50 for details.)
F VIDEO 2 input terminals
When listening with headphones privately, switch off
the digital sound field processor (so that no DSP
program name is illuminated on the display) by
pressing the DSP ON/OFF button on the remote
control transmitter.
Connect an auxiliary video or audio input source unit
such as a camcorder to these terminals. The source
connected to these terminals can be selected by the
corresponding input selector button.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND THEIR FUNCTIONS
G
(skip)/
(search)
I REPEAT button
When the CD player is selected, this button is used for
the skip search or the manual search (in reverse
direction).
When the CD player is selected, pressing this button
turns the CD player into the single repeat play mode.
(In this mode, “REP” lights up on the display.)
Pressing this button again changes into the full repeat
play mode (In this mode, “F REP” lights up on the
display.), and pressing once more cancels the repeat
play mode.
HOUR
Used to change “hour” when setting the clock or timer.
RDS MODE (for U.K. and Europe models only)
When the tuner is selected, pressing this button turns
the tuner into the PTY SEEK mode.
FREQ PS/PTY/RT/CT (for U.K. and Europe models
only)
When an RDS station is received, pressing this button
changes the display mode into the PS mode, PTY
mode, RT mode and/or CT mode (if the station
employs those RDS data services), and frequency
display in turn.
H
(search)/
(skip)
When the CD player is selected, this button is used for
the skip search or the manual search (in advance
direction).
MIN
Used to change “minute” when setting the clock or timer.
RDS START (for U.K. and Europe models only)
When the tuner is selected, press this button to begin
searching for a station after the desired program type is
selected in the PTY SEEK mode.
Open and close the control door
When it is not necessary to operate controls inside the control door, close the door.
To open the door
To close the door
VIDEO
2
PHONES
/
Press until it “clicks”.
2
Press until it “clicks”.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND THEIR FUNCTIONS
DISPLAY PANEL
1
2
3 4
5
67 8 9 0
TRACK PRESET
TIMER SLEEP
PRO LOGIC DSP OFF
ENHANCED MONO MOVIE
ROCK CONCERT VIDEO
DISCO HALL STADIUM
F REP
KHz
AUTO ST
MEMORY
PTY HOLD
MHz
A B
1 DSP program indicators
7 TIMER indicator
The name of a selected DSP program lights up when
the built-in digital sound field processor and/or the
Dolby Pro Logic Surround decoder is on.
Lights up while the built-in timer is functioning.
8 SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
2 DSP OFF indicator
Lights up if neither the digital sound field processor nor
the Dolby Pro Logic Surround decoder is on. In this
state, sound output is 2-channel stereo.
9 ST indicator
Lights up when an FM stereo broadcast with sufficient
signal strength is received.
3 Track number indicator
0 MEMORY indicator
When the CD player is selected, the currently selected
track number is shown here.
When the MEMORY button is pressed, this indicator
flashes for about 5 seconds. During this period, the
displayed station can be programmed to the memory
by selecting a desired preset station number and then
pressing the MEMORY button again.
4 Preset number indicator
When the tuner is selected and it is in the preset tuning
mode, the currently selected preset number is shown
here.
A AUTO indicator
Lights up when the tuner is in the automatic tuning
mode.
5 Multi-information display
Displays various information, for example station
frequency, playing time of compact disc and name of
selected input source.
B PTY HOLD indicator (for U.K. and Europe
models only)
Lights up while the search is performed in the PTY
6 (F) REP indicator
SEEK mode.
When the CD player is selected and it is in the single
repeat play mode, “REP” lights up. When the CD player
is in the full repeat play mode, “F REP” lights up.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND THEIR FUNCTIONS
REMOTE CONTROL TRANSMITTER
For
Tuner
1
PRESET
TUNER
CD
4
5
6
2
For CD
player
3
CENTER/REAR
LEVEL
/DELAY
C/R/D
7
8
9
B
For
DSP
PROGRAM
SUBWOOFER
0
A
ON/OFF
TEST
DSP
AMP
INPUT
SLEEP
D
For the
System
VOLUME
POWER
C
E
For tuner
For CD player
1 PRESET station number selector (
/
)
2 Open/close (
) button
Opens and closes the disc tray.
buttons
Controls tuner.
3 Repeat (
) button
: Selects lower preset station number.
: Selects higher preset station number.
Pressing this button turns the CD player into the single
repeat play mode. (In this mode, “REP” lights up on the
display.)
If the tuner is not selected as the input source, pressing
one of these buttons selects the tuner, and then selects
a preset station number.
If this system is in the standby mode, pressing one of
these buttons turns this system on, and then operates
in the same way.
Pressing this button again changes into the full repeat
play mode (In this mode, “F REP” lights up on the
display.), and pressing once more cancels the repeat
play mode.
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND THEIR FUNCTIONS
4 Stop ( ) button
9 TEST button
Stops playing back the disc.
Used for speaker balance adjustment. (For details,
refer to pages 26 to 27.)
If the CD player is not selected as the input source,
pressing this button selects the CD player with the CD
player stopped.
If this system is in the standby mode, pressing this
button turns this system on, and then operates in the
same way.
0 PROGRAM selector (
When the built-in digital sound field processor
(including the Dolby Pro Logic Surround decoder) is on,
whenever the “ ” or “ ” button is pressed, the
currently selected DSP program is changed in turn.
The name of selected program lights up on the display.
/
) buttons
5 Play/pause ( / ) button
Pressing this button starts playing back a disc.
Pressing this button again pauses the playback, and
pressing it once more resumes the playback.
If the CD player is not selected as the input source,
pressing this button selects the CD player and starts
playing back a disc.
If this system is in the standby mode, pressing this
button turns this system on, and then operates in the
same way.
A SUBWOOFER level (+/–) buttons
Pressing the “+” button raises and pressing the “–” button
lowers the output level to the subwoofer (SW-AV1).
For the system
B SLEEP button
This button is used to turn the built-in SLEEP timer on
and off, and to set the SLEEP time. (See page 51 for
details.)
6 Skip (search)
(
)/
(
) buttons
Used for the skip search or the manual search.
C POWER switch
Turns the power to this system on and turns this
system in the standby mode alternately.
For DSP
7 CENTER/REAR/DELAY and LEVEL (+/–)
buttons
Adjust the center channel output level (CENTER), the
rear channel output level (REAR) and the delay time
(DELAY).
Select the item which you want to adjust by pressing
the CENTER/REAR/DELAY button and adjust its level
or time by pressing the LEVEL (+/–) button.
D INPUT selector (
/
) buttons
Whenever the “ ” or “ ” button is pressed, the
currently selected input source is changed in turn.
The name of selected input source is shown on the
display.
E VOLUME (+/–) buttons
Pressing the “+” button raises and pressing the “–” button
lowers the volume of whole sound output of this system.
8 DSP ON/OFF button
Switches on/off the digital sound field processor
(including the Dolby Pro Logic Surround decoder).
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
TURNING THE POWER TO THIS SYSTEM ON OR IN THE STANDBY MODE
TURNING THE POWER TO THIS SYSTEM ON OR IN THE STANDBY MODE
If the AC supply lead is connected to the AC outlet, this
system can be turned on and turned into the standby
mode by pressing the POWER switch on the front
panel of the main control unit or the POWER switch on
the remote control transmitter.
While the power is on, the display on the main
control unit shows the name of currently selected
input source or other information.
In the standby mode, the display shows only the
time.
•
PUSH OPEN
/
OPEN/
CLOSE
CD
TUN
POWER
MINI COMPONENT SYSTEM AV–1
Automatic function to turn the system into the
standby mode
The power of this system will be automatically turned into
the standby mode if there is no operation on the control
parts of this system, and no playback of CD for about 30
minutes.
* This function is not available unless time setting is
made on the built-in clock.
Direct input source selection
When this system is in the standby mode, pressing an
input selector button will turn the power on and select
the corresponding input source.
Standby mode
While the power is on, pressing the POWER switch
(or the POWER switch on the remote control
transmitter) switches the system to the Standby
mode. (In this mode, the display shows only the
time.) In this mode, main voltage is still present
inside the system. If you want to switch off the
system completely, disconnect the AC power plug
from the AC outlet.
PRESET
TUNER
CD
CENTER/REAR
/DELAY
LEVEL
C/R/D
PROGRAM
SUBWOOFER
ON/OFF
TEST
DSP
AMP
INPUT
SLEEP
VOLUME
POWER
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENTS BEFORE LISTENING OPERATIONS
SETTING THE CLOCK
1 While the power is on, press the DISPLAY button to
1
display the time. If this system is in the standby
mode, you can proceed to the next step.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
TIME ADJ
TIMER
2 While holding the TIME ADJ button pressed, press
the HOUR button and set the hour.
* Press the HOUR button once to advance the time
by 1 hour. Press and hold to advance
continuously.
/
/
REPEAT
HOUR
MIN
2
3 While holding the TIME ADJ button pressed, press
the MIN button and set the minute.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
TIME ADJ
TIMER
* Press the MIN button once to advance the time by
1 minute. Press and hold to advance
continuously.
* The hour setting will not advance even if minute is
advanced from “59” to “00”.
/
/
REPEAT
HOUR
MIN
RD
RDS START
FREQ PS/PTY/RT/CT
Changes
3
Europe, U.K., Australia and Singapore models use
a 24-hour display. U.S.A. and Canada models use
a 12-hour display shown by “AM (PM) 12:00”. For
General model, either the 24-hour display or the
12-hour display is selected depending on the
setting of the FREQUENCY STEP switch on the
rear panel, so you cannot select a desired type
freely.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
TIME ADJ
TIMER
/
/
REPEAT
HOUR
RDS MODE
MIN
RDT
FREQ PS/PTY/RT/CT
Changes
In the event of a power failure or when the AC
supply lead is disconnected.
The time display will go out, however, the clock will
function for about 5 minutes without power supply. So
you do not have to reset the time if the AC power
supply is resumed within about 5 minutes.
When the AC power supply is resumed after more than
5 minutes pass without power supply, the time display
will flash on and off to indicate that the time must be
reset.
ADJUSTING BRIGHTNESS OF THE DISPLAY
If desired, you can adjust brightness of the display.
This adjustment can be made even though this system
is in the standby mode.
1 Press and hold the DISPLAY button for more than 2
seconds so that “DIMMER±0” appears on the
display.
Control range
When the power is on: ±0 to –6 (Preset value: ±0)
In the standby mode: +3 to –3 (Preset value: ±0)
2 Holding the DISPLAY button pressed, press the
“
/
” button once or more to increase or press
” button once or more to decrease
the “
/
brightness.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENTS BEFORE LISTENING OPERATIONS
SPEAKER BALANCE ADJUSTMENT
This procedure lets you adjust the sound output level
balance between the front, center, and rear speakers
using the built-in test tone generator. When this
adjustment is performed, the sound output level heard
at the listening position will be the same from each
speaker. This is important for the best performance of
the built-in Dolby Pro Logic surround decoder.
The adjustment of each speaker output level
should be done at your listening position with the
remote control transmitter. Otherwise, the result
may not be satisfactory.
R
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
HOUR
MIN
PHONES
/
OPEN/CLOSE
CD
POWER
1
1 Press the POWER switch to turn the power on.
2 Press the VOLUME “–” (or “
”) button to decrease
the volume to minimum until “MIN” is shown on the
display.
RESET/BAND
REPEAT
DISPLAY
3 If no DSP program name is illuminated on the
display, press the DSP ON/OFF button so that a
name of program lights up on the display.
/
OPEN/CLOSE
CD
TUNER
TAPE/MD
VCR
VIDEO
1
VIDEO
2
VOLUME
4 Press the TEST button.
2
* “TEST” appears on the display.
5 Press the VOLUME “+” button to increase the
volume.
* Volume level is shown on the display.
You will hear a test tone (like pink noise) from the left
front speaker, then the center speaker, then the right
front speaker, and then the rear speakers, for about
two seconds each. The display changes as shown
below.
PRESET
TUNER
4
CD
CENTER/REAR
/DELAY
LEVEL
C/R/D
PROGRAM
SUBWOOFER
ON/OFF
DSP
3
4
TEST
INPUT
SLEEP
VOLUME
(L and R)
POWER
AMP
5
2
1
* The test tone from the left rear speaker and the right
rear speaker will be heard at the same time.
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENTS BEFORE LISTENING OPERATIONS
6 Adjust the sound output levels of the center speaker
and the rear speakers by using the LEVEL +/–
buttons so that they become almost as same as that
of the front speakers.
●
When the test tone is output from the center
speaker, pressing the LEVEL + or – button
changes the output level of the center speaker.
PRESET
TUNER
CD
CENTER/REAR
/DELAY
LEVEL
C/R/D
6
Adjustable
PROGRAM
SUBWOOFER
ON/OFF
DSP
AMP
TEST
7
INPUT
●
When the test tone is output from the rear
speakers, pressing the LEVEL + or – button
SLEEP
VOLUME
POWER
changes the output level of the rear speakers.
Adjustable
*
Pressing the “+” button raises and the “–” button
lowers the level.
* You can adjust the subwoofer output level by
pressing the SUBWOOFER level + or – button
only when the test tone is output from the left
front, center or right front speaker.
7 If the adjustments have finished, press the TEST
button to cancel the test tone.
*
“TEST” disappears from the display.
Note
Once you have completed these adjustments, you can
adjust whole sound level on this system by using the
VOLUME button (or the VOLUME buttons on the
remote control transmitter) only.
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
ENJOYING LISTENING TO A SOURCE
BASIC LISTENING OPERATIONS
When you have completed all connections and
adjustments before listening operations, begin listening
to a source on this system.
1
1 Press the POWER switch to turn the power on.
* When the power is on, the display on the main
control unit shows the name of currently selected
input source or other information.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
HOUR
MIN
PHONES
2 Press the VOLUME “ ” (or “–”) button to decrease
the volume to minimum until “MIN” is shown on the
display.
OPEN/CLOSE
POWER
3 Select a source which you want to listen to or watch
by pressing the corresponding input selector button.
* The name of selected input source is shown on
the display.
5
4 Play the source.
●
To play a CD on the built-in CD player, see
pages 30 to 32.
To listen to a radio program on the built-in
/
OPEN/CLOSE
CD
TUNER
TAPE/MD
VCR
VIDEO
1
VIDEO
2
VOLUME
●
tuner, see pages 33 to 37.
To play a source on an external audio/video
●
3
2
unit connected to this system, see page 44.
5 Press the VOLUME “ ” (or “+”) button to increase
the volume.
* Volume level is shown on the display.
6 If you prefer, use the built-in digital sound field
processor including the Dolby Pro Logic Surround
decoder.
PRESET
TUNER
a) Press the DSP ON/OFF button so that a name of
CD
DSP program appears on the display.
CENTER/REAR
/DELAY
LEVEL
C/R/D
6 c)
6 b)
PROGRAM
SUBWOOFER
ON/OFF
DSP
6 a), d)
PRO LOGIC
TEST
INPUT
SLEEP
3
5
2
VOLUME
POWER
AMP
1
b) Select a desired program by pressing the
PROGRAM selector “ ” or “ ” button.
(See page 45 for descriptions about programs.)
c) According as you prefer, adjust the delay time,
the center speaker output level and/or the rear
speaker output level. (See pages 47 to 48 for
details.)
d) To switch off the digital sound field processor;
Press the DSP ON/OFF button.
* Sound output becomes 2-channel stereo.
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
ENJOYING LISTENING TO A SOURCE
To finish listening to a source
1 Stop playing a source.
2 Press the VOLUME “
” (or “–”) button to decrease
the volume to minimum until “MIN” is shown on the
display.
/
OPEN/CLOSE
CD
TUNER
TAPE
/
MD
VCR
VIDEO
1
VIDEO
2
VOLUME
3 Press the POWER switch to turn this system into the
standby mode.
2
* In this mode, only the time is shown on the
display.
3
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
HOUR
MIN
PHONES
OPEN/CLOSE
POWER
Adjusting the subwoofer output level
According as you prefer, adjust the subwoofer output
level by pressing the SUBWOOFER level + (up) or –
(down) button.
PRESET
TUNER
CD
If you feel that bass tone is insufficient, increase the
level, and if you feel that bass tone is overly
emphasized, decrease the level.
CENTER/REAR
LEVEL
/DELAY
C/R/D
PROGRAM
ON/OFF
TEST
DSP
AMP
SUBWOOFER
INPUT
SUBWOOFER
– / +
SLEEP
2
VOLUME
POWER
3
Listening with headphones
Be sure that your headphones have a 3.5 mm (1/8”)
diameter plug and are between 16 ohms and 50
ohms impedance. Recommended impedance is 32
ohms.
When you listen with headphones, connect the
headphones to the PHONES jack. You can listen to
the sound to be output from the front speakers
through headphones.
●
●
PHONES
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
HOUR
MIN
PHONES
When listening with headphones privately, switch off
the digital sound field processor (so that no DSP
program name is illuminated on the display) by
pressing the DSP ON/OFF button on the remote
control transmitter. Adjust the VOLUME buttons for
desired volume.
OPEN/
CLOSE
C
POWER
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO A COMPACT DISC
COMPACT DISC PLAYER OPERATION
CD playback
1 Press the CD input selector button.
2 Press the OPEN/CLOSE button to open the disc
2, 4
tray.
3 Place a disc on the tray, label side up.
* 8 cm (3”) disc may be played without an adaptor.
/
OPEN/CLOSE
CD
TUNER
TAPE
/
MD
VCR
VIDEO
1
VIDEO
2
VOLUME
1
4 Press the OPEN/CLOSE button to close the disc
tray.
* The total number of tracks and the total playing
time of the disc are displayed for several seconds.
TRACK
PRESET
TUNER
Total number of tracks
Total playing time
2, 4
CD
CENTER/REAR
/DELAY
LEVEL
C/R/D
5 Press “ / ” to start playback from track 1.
PROGRAM
ON/OFF
DSP
SUBWOOFER
TEST
INPUT
SLEEP
1
To interrupt playback
VOLUME
POWER
AMP
1 Press “ / ”.
2 Press “ / ” again to resume playback from the
same point.
To stop playback
Press “ ”.
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO A COMPACT DISC
Direct operation
Precautions
When this system is in the standby mode, pressing the
CD input selector button will turn the power on and
start CD playback automatically.
* In this way, however, the display will not show the
total number of tracks and the total playing time of
the disc.
If TV or radio interference occurs during CD player
operation, move the unit away from the TV or radio.
Subjecting the unit to shock or vibration can cause
mistracking.
•
•
•
Playing back some compact discs at high volume
can cause mistracking. In this case, listen at lower
volume.
Do not pull open the disc tray forcibly with your hands.
Do not push the disc tray while it is moving.
If the power fails while the tray is open, wait until the
power supply returns or gently push the tray
manually to close it.
•
•
•
The temperature range for playing back compact
discs is recommended to be 5°C (41°F) – 35°C (95°F).
•
To play a desired track on the disc
(Skip search)
The beginning of any track can be found automatically.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
1 Begin playback.
/
/
REPEAT
HOUR
MIN
/
OPEN/CLOSE
CD
TUNER
TAPE/MD
VCR
O
2 Press the
button to advance or
reverse through the disc.
button to
Press once for each track to be advanced or
reversed.
1
Press
once to advance to the track following
•
•
•
the one now playing back.
Press
once to return to the start of the track
now playing back.
Press
twice to return to the track before the
track now playing back.
PRESET
TUNER
CD
Notes
This function can also be performed while the unit is
•
1
stopped. Press “ / ” when your desired track
number appears on the track number display.
Playback will begin from the beginning of the track.
This function will be performed forward or backward
from any point on the disc. However, it will not move
forward during playback of the final track.
CENTER/REAR
/DELAY
LEVEL
C/R/D
PROGRAM
ON/OFF
DSP
AMP
•
SUBWOOFER
INPUT
TEST
SLEEP
VOLUME
POWER
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO A COMPACT DISC
To advance or reverse play rapidly
(Manual search)
1 Begin playback.
2 Press and hold the
rapidly, and the
rapidly.
button to advance playback
button to reverse playback
1
The sound can be heard (although slightly
garbled) during manual search in either direction.
This is convenient for reviewing the contents
quickly.
*
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
HOUR
MIN
Note
/
OPEN/CLOSE
CD
TUNER
TAPE/MD
VCR
O
Manual search can also be performed while playback
is paused, though no sound will be heard.
1, 2
Repeat play
A single track or an entire disc can be continuously
repeated.
Repeat play modes
Single repeat (“REP” lights up on the display.)
A selected single track is played back repeatedly.
Full repeat (“F REP” lights up on the display.)
An entire disc is played back repeatedly.
PRESET
TUNER
CD
1 Press the REPEAT button once or more to select
the single repeat play mode (REP) or the full repeat
play mode (F REP) confirming it on the display.
1, 2
1
CENTER/REAR
LEVEL
/DELAY
C/R/D
PROGRAM
ON/OFF
TEST
DSP
AMP
(off)
REP
SUBWOOFER
INPUT
SLEEP
VOLUME
POWER
F REP
2 Press “
/
”.
To cancel the repeat play
Press the REPEAT button once or more so that both
“REP” and “F REP” go off from the display.
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO A RADIO PROGRAM
TUNING OPERATION
Normally, if station signals are strong and there is no
interference, quick automatic-search tuning (Automatic
tuning) is possible. However, if signals of the station
you want to select are weak, you must tune to it
manually (Manual tuning).
2
4
3
Automatic tuning
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
1 Select the built-in tuner as the input source by
VIDEO
2
TIME ADJ
TIMER
pressing the TUNER input selector button.
/
/
REPEAT
HOUR
MIN
/
OPEN/CLOSE
CD
TUNER
TAPE/MD
VCR
P
2 Select the reception band [FM or AM (MW or LW)]
by pressing the PRESET/BAND button confirming it
on the display.
1
<Except U.K. and Europe models>
or
<U.K. and Europe models>
PRESET
TUNER
,
or
CD
CENTER/REAR
/DELAY
LEVEL
*
Do not select a preset tuning mode (Do not
select the mode in which “PRESET” lights up on
the display.)
C/R/D
PROGRAM
SUBWOOFER
ON/OFF
DSP
TEST
INPUT
SLEEP
1
3 Press the AUTO/MAN’L button so that “AUTO”
VOLUME
appears on the display.
POWER
AMP
AUTO ST
MHz
(In this mode, stations are received in stereo or
monaural automatically.)
4 Press “ ” to tune to a higher frequency, or press
“
” to tune to a lower frequency.
5 If the station where tuning search stopped is not the
desired one, follow step 4 again.
*
*
If the tuning search does not stop at the desired
station, change to the Manual tuning method as
described on the next page.
ST (Stereo) indicator will light up when an FM
stereo broadcast with sufficient signal strength is
received.
“AM” is for U.S.A., Canada, Australia, Singapore
and General models.
“MW/LW” is for U.K. and Europe models.
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO A RADIO PROGRAM
Manual tuning
1 If the built-in tuner is not selected as the input
source, press the TUNER input selector button.
2
4
3
2 Select the reception band [FM or AM (MW or LW)]
by pressing the PRESET/BAND button confirming it
on the display.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
<Except U.K. and Europe models>
HOUR
MIN
/
OPEN/CLOSE
CD
TUNER
TAPE/MD
VCR
M
or
1
<U.K. and Europe models>
,
or
*
Do not select a preset tuning mode (Do not
select the mode in which “PRESET” lights up on
the display.)
3 Press the AUTO/MAN’L button so that “AUTO”
disappears from the display.
PRESET
TUNER
(In this mode, stations are received in monaural.)
CD
4 Press and hold “ ” to tune to a higher frequency,
or press and hold “ ” to tune to a lower frequency.
Release it just before reaching the desired
frequency, and then press it repeatedly until the
desired frequency appears.
CENTER/REAR
/DELAY
LEVEL
C/R/D
PROGRAM
ON/OFF
DSP
SUBWOOFER
INPUT
TEST
SLEEP
1
VOLUME
Note
POWER
AMP
If you tune in to an FM station with the manual tuning
method, it is received in monaural automatically to
increase the signal quality.
E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO A RADIO PROGRAM
Preset tuning
This unit can store station frequencies selected by
tuning operation. With this function, you can select any
desired station by only calling the corresponding preset
station number. Up to 40 stations (8 stations x 5
groups) can be stored.
2, 4
3
To store stations
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
(Example: To store a station to the preset station
number A1)
/
/
REPEAT
HOUR
MIN
/
OPEN/CLOSE
CD
TUNER
TAPE/MD
VCR
O
1 Tune in to a desired station.
(Refer to pages 33 to 34 for tuning procedure.)
2 Press the MEMORY button.
* “MEMORY” and “PRESET” will flash on the
display for about 5 seconds.
PRESET
AUTO ST
MEMORY
PRESET
MHz
TUNER
CD
3
3
Select a preset station number by pressing the
TUNER ” or “ button on the front panel (or
the PRESET station number selector “ ” or “
button on the remote control transmitter) repeatedly
before “MEMORY” goes out.
CENTER/REAR
LEVEL
/DELAY
C/R/D
“
”
”
PROGRAM
ON/OFF
TEST
DSP
AMP
SUBWOOFER
INPUT
* Holding a button pressed will change the group
(A, B, C, D, E) of preset station numbers in turn.
SLEEP
VOLUME
POWER
(In this case, select “A1”.)
PRESET
AUTO ST
MHz
Changes.
4 Within about 5 seconds, press the MEMORY button
again.
PRESET
AUTO ST
MHz
40 preset station numbers
Number
The currently displayed station
has been programmed to A1.
5 In the same way, program other stations to the
1
2
3
4
5
6
7
8
preset station number A2, A3... A8, B1, B2...C1....
A
B
C
D
E
A1 A2 A3 A4 A5 A6 A7 A8
B1 B2 B3 B4 B5 B6 B7 B8
C1 C2 C3 C4 C5 C6 C7 C8
D1 D2 D3 D4 D5 D6 D7 D8
E1 E2 E3 E4 E5 E6 E7 E8
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO A RADIO PROGRAM
To recall a preset station
On the remote control transmitter:
Select the desired preset station number by pressing
2
1
the PRESET station number selector “ ” or “
”
button.
On the front panel:
1 If “PRESET” is not illuminated on the display, press
the PRESET/BAND button once or more so that
“PRESET” lights up on the display.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
HOUR
MIN
/
OPEN/CLOSE
CD
TUNER
TAPE/MD
VCR
M
2 Select the desired preset station number by
pressing the TUNER “ ” or “ ” button.
Notes
A new setting can be programmed in place of the
former one.
•
For every preset station, the setting of the
AUTO/MAN’L button is stored along with the station
frequency.
•
PRESET
PRESET
TUNER
CD
CENTER/REAR
/DELAY
LEVEL
C/R/D
PROGRAM
ON/OFF
DSP
SUBWOOFER
INPUT
TEST
SLEEP
VOLUME
POWER
AMP
Memory back-up
The memory back-up circuit prevents the
programmed data from being lost even if the AC
supply lead is disconnected from the AC outlet or
the power is cut due to temporary power failure. If,
however, the power is cut for more than one week,
the memory may be erased. If so, it can be re-
programmed by simply following the Preset tuning
steps.
E-36
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO A RADIO PROGRAM
Automatic preset tuning
You can also make use of an automatic preset tuning
function. By this function, this tuner performs automatic
tuning and stores stations with strong signals
sequentially. Up to 40 stations are stored
2
1
automatically in the same way as in the manual preset
tuning method on page 35.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
1 Select the built-in tuner as the input source by
pressing the TUNER input selector button.
/
/
REPEAT
HOUR
MIN
/
OPEN/CLOSE
CD
TUNER
TAPE/MD
VCR
P
2 Press and hold the MEMORY button for about 2
seconds.
* “MEMORY” and “AUTO” will flash.
AUTO
MEMORY
This tuner performs automatic tuning and searches FM
and AM (MW and LW for U.K. and Europe models
only) stations in that order. Received stations are
programmed to the preset station number A1, A2, A3...
A8, B1... sequentially.
PRESET
TUNER
When the automatic preset tuning is completed
The display shows the frequencies of the first preset
station (stored to A1).
Check the contents and the number of preset stations
by following the procedure of the section “To recall a
preset station” on the previous page.
CD
CENTER/REAR
/DELAY
LEVEL
C/R/D
PROGRAM
SUBWOOFER
ON/OFF
DSP
TEST
INPUT
To recall a preset station
Simply follow the procedure of the section “To recall a
preset station” on the previous page.
SLEEP
1
VOLUME
POWER
AMP
Notes
The automatic preset tuning search will be performed
through all frequencies until 40 stations are stored. If
the number of received stations is less than 40, the
search will stop after searching all frequencies.
* Since FM stations are searched for first, there may
be a case that 40 preset stations are occupied by
FM stations only.
With this function, only stations with sufficient signal
strength are stored automatically. If the station you
want to program is weak in signal strength, tune in
to it with the Manual tuning method (in monaural)
and program it by following the procedure of the
section “To store stations” on page 35.
•
•
You can replace a preset station by another FM or
AM (MW or LW) station manually by simply following
the procedure of the section “To store stations” on
page 35.
•
•
<For U.K. and Europe models only>
This tuner is originally set so that only RDS stations
are searched instead of all FM stations by this
operation. (FM stations that employ no RDS network
service cannot be programmed.)
However, you can change the setting so that the unit
can program not only RDS stations but also other
FM stations. (Refer to page 43 for details.)
E-37
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEIVING RDS STATIONS U.K. and Europe models only
<
>
RECEIVING RDS STATIONS U.K. and Europe models only
<
>
RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many
countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal.
RDS data contains various information, such as PI (Program Identification), PS (Program Service name), PTY
(Program Type), RT (Radio Text), CT (Clock Time), etc.
RDS function is carried out among the network stations.
* This unit utilizes PS, PTY, RT and CT to receive RDS broadcast stations.
Displaying RDS data
AUTO ST
This unit can be turned into the following four modes to display RDS data.
PS (Program Service name) mode:
Displays the name of the RDS station
now being received instead of the
frequency.
RT (Radio Text) mode:
Displays information about the program (such as title of
the song, name of the singer, etc.) on the RDS station
now being received.
CT (Clock Time) mode:
PTY (Program Type) mode:
Displays current time. This signal comes from the RDS
station now being received. Time of the built-in clock
can be automatically corrected on the basis of this
signal.
Displays the type of the program on the RDS station
now being received. There are 15 program types to
classify RDS stations as shown on the next page.
E-38
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEIVING RDS STATIONS U.K. and Europe models only
<
>
Ⅵ Program types in the PTY mode
News:
Varied:
NEWS
VARIED
POP M
Short accounts of facts, events and
publicly expressed views, reportage
and actuality.
Used for mainly speech-based
programs usually of light-entertainment
nature, not covered by above
categories. Examples are: quizzes,
panel games, personality interviews,
comedy and satire.
Current affairs:
AFFAIRS
Topical program expanding or enlarging
upon the news, generally in different
presentation style or concept, including
documentary debate, or analysis
Pop:
Commercial music, which would
generally be considered to be of current
popular appeal, often featuring in
current or recent record sales charts.
Information:
INFO
Program whose purpose is to impart
advice in the widest sense, including
meteorological reports and forecasts,
consumer affairs, medical help, etc.
Rock:
ROCK M
M.O.R. M
Contemporary modern music, usually
written and performed by young
musicians.
Sport:
SPORT
Program concerned with any aspect of
sport.
M.O.R.:
(Middle of the Road Music). Common
term to describe music considered to be
“easy-listening”, as opposed to Pop,
Rock or Classical. Music in this
category is often but not always, vocal,
and usually of short duration (<5 min.)
EDUCATE Education:
Program intended primarily to educate,
of which the formal element is
fundamental.
Drama:
All radio plays and serials.
DRAMA
Light classics:
LIGHT M
Classical Musical for general, rather
than specialist appreciation. Examples
of music in this category are
instrumental music, and vocal or choral
works.
Culture:
CULTURE
Programs concerned with any aspect of
national or regional culture, including
religious affairs, philosophy, social
science, language, theatre, etc.
Serious classics:
CLASSICS
OTHER M
Performances of major orchestral
works, symphonies, chamber music
etc., and including Grand Opera.
Science:
Programs about the natural sciences
and technology.
SCIENCE
Other music:
Musical styles not fitting into any of the
above categories. Particularly used for
specialist music, of which Jazz, Rhythm
& Blues, Folk, Country, and Reggae are
examples.
E-39
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEIVING RDS STATIONS U.K. and Europe models only
<
>
Changing the RDS modes
FREQ PS/PTY/RT/CT
When an RDS station is received, by pressing the
FREQ PS/PTY/RT/CT selector button once or more,
you can change the display mode among the RDS
modes employed by the received station in the order
shown below. (The RDS mode not employed by the
station cannot be selected.)
O
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
Notes
/
/
REPEAT
HOUR
MIN
PHONES
RDS MODE
RDS START
FREQ PS/PTY/RT/CT
● If the received station is not an RDS station, pressing
the FREQ PS/PTY/RT/CT selector button displays
“NO RDS” on the display, and then it returns to the
frequency display mode.
/
OPEN/CLOSE
CD
POWER
● When an RDS station is received, the display is
automatically turned into the PS mode. Do not press
the FREQ PS/PTY/RT/CT selector button until the
display is turned into the PS mode. If the button is
pressed before the display mode is changed, it may
occur that “NO PS” appears on the display. This is
because the unit has not received all of the RDS
data on the station yet.
1 Frequency
display mode
➀ Frequency display mode
The frequency of the station being received is
displayed.
2 PS mode
➁ PS (Program Service name) mode
The name of the station being received is
displayed using characters selected from among
64 Roman Alphabets including umlaut sign.
* If other characters are used on the PS data,
they are displayed with underbars.
3 PTY mode
4 RT mode
5 CT mode
* “PS WAIT” may flash while the unit is
receiving the data.
* If the station does not employ the PS data
service, “NO PS” lights up on the display for
about 2 seconds and then returns to
frequency display mode.
➂ PTY (Program Type) mode
The type of the program on the station being
received is displayed.
In this mode, you can make this unit search for a
station which is broadcasting a program of your
desired program type. For details, refer to page
42.
* If the RDS station does not employ the PTY
data service, “NO PTY” lights up on the
display for about 2 seconds and then returns
to frequency display mode.
* If the station has PS data, after that, it turns
into the PS mode.
E-40
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEIVING RDS STATIONS U.K. and Europe models only
<
>
Notes
➃ RT (Radio Text) mode
● RDS data service cannot be utilized by this unit if the
received signal is not strong enough. Especially, the
RT (Radio Text mode) needs much data to be
received, so it may occur that RT mode cannot be
displayed even if other RDS modes (PS, PTY, etc.)
are displayed.
● There may be a case that RDS data reception is not
possible due to poor reception conditions. If so, press
the AUTO/MAN’L button so that “AUTO” goes off
from the display. Though the reception mode is
changed to monaural by this operation, when you
change the display to an RDS mode, RDS data may
be displayed.
Information about the program on the station
being received is displayed. Information is
displayed by a maximum of 64 Roman Alphabets
including umlaut sign.
* If other characters are used on the RT data,
they are displayed with underbars.
“RT WAIT” may flash while the unit is
receiving the data.
* If the RDS station does not employ the RT
data service, “NO RT” lights up on the display
for about 2 seconds and then returns to
frequency display mode.
* If the station has PS data, after that, it turns
into the PS mode.
● If the signal strength gets weakened by external
interference during receiving an RDS station, the
RDS data service may be cut off suddenly and turn
into the frequency display mode.
➄ CT (Clock Time) mode
Current time is displayed in the following form.
The CT data from the station being received
changes every minute.
Hour
Minute
This unit corrects time of the built-in clock by
synchronizing it with the CT data. (This function
can also be canceled, if so desired. Refer to
page 43 for details.)
* “CT WAIT” may flash while the unit is
receiving the data. If the data is accidentally
cut off, “CT WAIT” may flash and then turn into
“NO CT”.
* If the RDS station does not employ the CT
data service, “NO CT” lights up on the display
for about 2 seconds and then returns to
frequency display mode.
* If the station has PS data, after that, it turns
into the PS mode.
E-41
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEIVING RDS STATIONS U.K. and Europe models only
<
>
Calling a program of your desired
program type from among preset
RDS stations (PTY SEEK)
By designating a program type, the unit automatically
searches all preset FM stations for an RDS station
which broadcasts a program of that program type.
* There are 15 program types to classify RDS
stations. For details, refer to page 39.
1 Turn the tuner into the PTY SEEK mode by pressing
the PTY SEEK MODE button.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
HOUR
MIN
* The name of the program type of the station now
being received or “NEWS” flashes on the display.
RDS MODE
RDS START
FREQ PS/PTY/RT/CT
/
OPEN/CLOSE
CD
TUNER
TAPE
/
MD
VCR
O
2 Select the desired program type by pressing “ ” or
“
”.
1 3
2
* If there is no operation for about 20 seconds, this
mode is canceled and turns into the frequency
display. If the station has PS data, after that, it
turns into the PS mode.
3 Press the PTY SEEK START button.
The tuner begins searching all preset FM stations.
* “PTY HOLD” lights up on the display.
* The preset station number indicator, the name of
the program type and “AUTO” flash. The preset
station number changes rapidly in sequence.
● If a station which broadcasts a program of the
program type is found, the tuner stops at the station
and turns into the frequency display. If the station
has PS data, after that, it turns into the PS mode.
● If the called station is not the desired one, press the
PTY SEEK START button once more before “PTY
HOLD” goes out from the display. The tuner begins
searching for another station which broadcasts a
program of the same program type.
● If no station is found, “NO PTY” appears and then
returns to frequency display. If the station has PS
data, after that, it turns into the PS mode.
* If the PTY SEEK START button is pressed once
more during searching, this mode is canceled and
turns into the frequency display. If the station has
PS data, after that, it turns into the PS mode.
To cancel this function
If the PTY SEEK MODE button is pressed once more,
the PTY SEEK mode is canceled and turns into the
frequency display. If the station has PS data, after
that, it turns into the PS mode.
E-42
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEIVING RDS STATIONS U.K. and Europe models only
<
>
Other functions which make use of
RDS data service
➀ ON (OFF) CT > CLOCK
This unit corrects the time of the built-in clock
automatically by synchronizing it with the CT data
on the RDS station being received.
This tuner has the following functions which make use
of RDS data service. These are originally in operation
[ON].
However, you can cancel these functions [OFF], if so
desired.
* If you receive an RDS station of some other
country, the built-in clock is synchronized with the
time setting of the country.
* If the built-in clock is not yet set for current time
or reset due to a power failure etc., it will be set
for the time of the CT data automatically, whether
this setting is ON or OFF.
➁ ON (OFF) LOCAL > CT
If the RDS station being received employs the local
time (summer time etc.) data service, its time is
displayed in the CT mode.
* If the setting of function ➀is “ON”, the built-in
clock is synchronized with the local time data.
1
➂ ON (OFF) A. M. > RDS
Only RDS stations are searched instead of all FM
stations by the automatic preset tuning operation
when the setting is ON.
(See page 37 for the operating procedure.)
If you switch this function OFF, not only RDS
stations but also other FM stations are
programmed along with MW and LW stations by
the automatic preset tuning operation.
2
3
To switch these functions on and off
1 Select the FM band by pressing the PRESET/BAND
button, confirming it on the display.
2 Press the DISPLAY button to display the current time.
3 Press the FREQ PS/PTY/RT/CT selector button.
The title of function ➀“ON CT > CLOCK ” is
displayed.
4 Select the title of function whose setting you want to
switch by pressing the PTY SEEK MODE button
once or more.
1
2
C
O
5 Switch the function ON or OFF by pressing the PTY
SEEK START button, confirming it on the display.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
6 Press the FREQ PS/PTY/RT/CT selector button
again to restore the frequency display mode.
* If the station has PS data, after that, it turns into
the PS mode.
HOUR
RDS MODE
MIN
RDS START
PHONES
FREQ PS/PTY/RT/CT
/
OPEN/CLOSE
CD
POWER
4
5
3, 6
Notes
● Once the setting is changed, it will be stored until it is
changed again by the above operation.
● During the operation, if there is no operation for
about 20 seconds, this mode is canceled and turns
into the frequency display.
If the station has PS data, after that, it turns into the
PS mode.
E-43
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO A SOURCE ON AN EXTERNAL UNIT
OPERATING EXTERNAL UNITS CONNECTED WITH THIS SYSTEM
To listen to or watch a source on an
external unit connected with this
system
1 Select a desired input source by pressing the
corresponding input selector button.
* The name of selected input source is shown on
the display.
* The names of input selector buttons correspond
with the names of terminals to connect with
external units on the rear of the main control unit.
/
OPEN/CLOSE
CD
TUNER
TAPE/MD
VCR
VIDEO
1
VIDEO
2
VOLUME
2 Play back the source.
1, 1
2
(For a video source, turn the monitor TV on.)
On screen display
If the monitor TV connected to this system is turned
on, the name of selected input source, the name of
selected DSP program, volume level settings, etc.
are shown on the monitor screen.
PRESET
TUNER
CD
To record a source to tape
Any input source can be recorded by a tape deck
and/or a VCR, MD, etc. connected with this system.
CENTER/REAR
/DELAY
LEVEL
C/R/D
PROGRAM
SUBWOOFER
ON/OFF
DSP
AMP
1 Select the source to be recorded by pressing the
TEST
INPUT
corresponding input selector button.
SLEEP
1, 1
2
VOLUME
POWER
2 Play back the source and then turn the volume up
to confirm the input source.
3 Begin recording on the tape deck or VCR etc.
connected with this system.
E-44
Download from Www.Somanuals.com. All Manuals Search And Download.
USING DIGITAL SOUND FIELD PROCESSOR (DSP)
USING DIGITAL SOUND FIELD PROCESSOR (DSP)
This system incorporates a sophisticated, multi-
Brief Overview of Digital Sound Field
program digital sound field processor. The processor
allows you to electronically expand and change the
shape of the audio sound field from both audio and
video sources, creating a theater-like experience in
your listening room. You can create an excellent audio
sound field by selecting a suitable sound field program
(this will, of course, depend on what you will be
listening to), and adding desired adjustments.
Programs
The following list gives you a brief description of the
sound fields produced by each of the DSP programs.
Keep in mind that most of these are precise digital
recreations of actual acoustic environments. The data
for these sound fields was recorded at actual locations
using sophisticated sound field measurement
equipment.
In addition, this unit incorporates a Dolby Pro Logic
Surround decoder for multi-channel sound reproduction
of sources encoded with Dolby Surround.
The operation of the Dolby Pro Logic Surround decoder
can be controlled by selecting the DSP program,
Note
The channel level balance between the left and
right rear effect speakers may vary depending on
the sound field you are listening to. This is due to
the fact that most of these sound field recreations
are actual acoustic environments.
PRO LOGIC or
PRO LOGIC ENHANCED.
PROGRAM
PRO LOGIC
FEATURE
This program is used for playback of sources encoded with Dolby Surround.
The application of a sophisticated digital signal processing system reduces crosstalk and
directs or steers the sound source more smoothly and precisely, as compared to conventional
types.
This program is also used for playback of sources encoded with Dolby Surround.
Enhancing the “Normal” Dolby Pro Logic, the DSP technology simulates the multi-surround
speaker systems of a 35 mm movie theater. This effect creates a wide surround sound field,
and expands the sound stage with an improved presence image. This program is used for
musical based movies, as well as drama and comedy based movies.
PRO LOGIC
ENHANCED
This program gives you long delays between direct sounds and effect sounds, and
extraordinarily spacious feel of a large stadium.
STADIUM
DISCO
This program recreates the acoustic environment of a lively disco in the heart of a very lively
city. The sound is dense and highly concentrated. It is also characterized by a high-energy,
“immediate” sound.
In this program, the center will appear to be deep behind the main speakers, creating an
expansive large hall ambience. Orchestra and opera music are suited for this sound field.
CONCERT HALL
ROCK CONCERT
This program is ideally suited for rock music. You will experience a very dynamic or lively
sound field.
This program is designed specifically to enhance mono source programs. Compared to a
strictly mono setting, the sound image created in this mode is wider and slightly forward of the
speaker pair, lending an immediacy to the overall sound. It is particularly effective when used
with old mono movies, news broadcasts and dialog.
MONO MOVIE
This program is effective for music videos and gives excellent depth and clarity for vocals.
For opera, the orchestra and stage are ideally recreated, letting you feel as if you were in an
actual concert hall.
CONCERT VIDEO
E-45
Download from Www.Somanuals.com. All Manuals Search And Download.
USING DIGITAL SOUND FIELD PROCESSOR (DSP)
Listening to a source with effect
sounds by the digital sound field
processing (including the Dolby Pro
Logic Surround decoding)
1 Play back a source. (For source playback, refer to
the sections beginning from page 30.)
2 If no DSP program name is illuminated on the
display, press the DSP ON/OFF button so that a
name of program lights up on the display.
PRESET
TUNER
CD
CENTER/REAR
/DELAY
LEVEL
C/R/D
4
3
PRO LOGIC
PROGRAM
SUBWOOFER
ON/OFF
DSP
AMP
2
TEST
INPUT
SLEEP
VOLUME
3 Press the PROGRAM selector “ ” or “ ” button
once or more so that the name of a desired
program appears on the sound field program
indicator.
POWER
* Whenever you press the PROGRAM selector
“
” button, the program changes and is
displayed as figured left.
* Pressing the PROGRAM selector “ ” button
changes the programs in the reverse order.
4 If desired, adjust the delay time and the output level
of each speaker. (For details, refer to the
corresponding descriptions on pages 47 to 48.)
Notes
●
Program selection can be made to individual input
sources. Once you select a program, it is linked with
the input source selected at that time. So, when you
select the input source next time, the same program
is automatically called.
If you prefer to cancel the DSP, press the DSP
ON/OFF button. The sound will be the normal 2-
channel stereo without surround sound effect.
When STADIUM, DISCO, CONCERT HALL, ROCK
CONCERT, MONO MOVIE or CONCERT VIDEO is
selected, no sound is heard from the center
speaker.
PRO LOGIC
PRO LOGIC ENHANCED
STADIUM
●
●
DISCO
●
When a monaural sound source is played with
DOLBY PRO LOGIC or DOLBY PRO LOGIC
ENHANCED, no sound is heard from the front
speakers and the rear speakers. Sound is heard
only from the center speaker.
CONCERT HALL
ROCK CONCERT
MONO MOVIE
CONCERT VIDEO
E-46
Download from Www.Somanuals.com. All Manuals Search And Download.
USING DIGITAL SOUND FIELD PROCESSOR (DSP)
Adjusting center speaker level
If desired, you can adjust the sound output level of the
center speaker even if the output level is already set in
“SPEAKER BALANCE ADJUSTMENT” on pages 26
to 27.
Control range : +10 to –20
PRESET
1 Press the CENTER/REAR/DELAY selector button
once or more so that “CENT” appears on the
display.
TUNER
CD
CENTER/REAR
/DELAY
LEVEL
C/R/D
2
1
PROGRAM
SUBWOOFER
ON/OFF
DSP
AMP
2 By continuously pressing the LEVEL control + or –
button, the level value changes continuously.
The value stops changing momentarily at “±0”.
TEST
INPUT
SLEEP
VOLUME
POWER
Adjustable
Notes
●
This adjustment can be made only when the digital
sound field program DOLBY PRO LOGIC or DOLBY
PRO LOGIC ENHANCED is selected.
Once the output level is adjusted, the level value will
●
be the same in all the digital sound field programs
mentioned above.
Adjusting rear speaker level
If desired, you can adjust the sound output level of the
rear speakers even if the output level is already set in
“SPEAKER BALANCE ADJUSTMENT” on pages 26
to 27.
Control range : +10 to –20
1 Press the CENTER/REAR/DELAY selector button
once or more so that “REAR” appears on the
display.
2 By continuously pressing the LEVEL control + or –
button, the level value changes continuously.
The value stops changing momentarily at “±0”.
Adjustable
Notes
●
This adjustment can be made only when the built-in
digital sound field processor is on.
Once the output level is adjusted, the level value will
●
be the same in all the digital sound field programs.
E-47
Download from Www.Somanuals.com. All Manuals Search And Download.
USING DIGITAL SOUND FIELD PROCESSOR (DSP)
Adjusting delay time
You can adjust the time difference between the
beginning of the sound from the front speakers and the
beginning of the effect sound from the rear speakers.
The larger the value, the later the effect sound is
generated.
This adjustment can be made to all programs
individually.
PRESET
TUNER
CD
Control range
PRO LOGIC : from 15 to 30 milliseconds
(Preset value: 20 milliseconds)
PRO LOGIC : from 15 to 30 milliseconds
CENTER/REAR
/DELAY
LEVEL
C/R/D
2
1
PROGRAM
SUBWOOFER
ON/OFF
DSP
AMP
ENHANCED
STADIUM
(Preset value: 20 milliseconds)
: from 1 to 50 milliseconds
TEST
INPUT
SLEEP
(Preset value: 45 milliseconds)
: from 1 to 100 milliseconds
(Preset value: 14 milliseconds)
VOLUME
POWER
DISCO
CONCERT HALL : from 1 to 100 milliseconds
(Preset value: 30 milliseconds)
ROCK CONCERT : from 1 to 100 milliseconds
(Preset value: 17 milliseconds)
MONO MOVIE
: from 1 to 100 milliseconds
(Preset value: 20 milliseconds)
CONCERT VIDEO : from 1 to 100 milliseconds
(Preset value: 28 milliseconds)
1 Press the CENTER/REAR/DELAY selector button
once or more so that “DEL” appears on the display.
2 By continuously pressing the LEVEL control + or –
button, the value changes continuously.
The value stops changing momentarily at the preset
point.
Adjustable
Notes
● Adding too much delay will cause an unnatural effect
with some sources.
● When the LEVEL control button is pressed, sound is
momentarily interrupted.
Note
The values of the delay time, center level and rear level
you set the last time will remain memorized even when
this system is in the standby mode.
However, if the power cord is kept disconnected for
more than one week, these values will be automatically
changed back to the original factory settings.
E-48
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE BUILT-IN TIMER
TIMER PLAY
By using the built-in timer, you can set the time when
this system turns on and a source begins playing
automatically, and the time when this system turns into
the standby mode automatically.
1 Prepare the source to be played.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
For tuner:
/
/
REPEAT
HOUR
MIN
Tune in to the station you will listen to.
/
OPEN/CLOSE
CD
TUNER
TAPE/MD
VCR
P
For CD player:
Load a disc on the disc tray.
2
2-➁
2-➀
2 Press the DISPLAY button.
Whenever the DISPLAY button is pressed, the
display mode changes as follows.
On each mode, make a setting for the timer play,
following the setting procedure described below.
→
➀Current time (TIMER on/off mode)
➁Source selecting mode (TUNER, CD)
➂ON TIME/Time setting mode
➃OFF TIME/Time setting mode
➄Normal display mode
PRESET
TUNER
CD
CENTER/REAR
/DELAY
LEVEL
C/R/D
PROGRAM
ON/OFF
DSP
SUBWOOFER
Note
TEST
The display mode will be changed to the next
mode after about 8 seconds elapse in turn
automatically. If the mode is changed before the
setting is completed, call the mode again by
pressing the DISPLAY button once or more.
INPUT
SLEEP
2-➁
VOLUME
POWER
AMP
Setting procedure:
➀Current time
Check to be sure that the current time is correct,
and press the TIMER button so that “TIMER”
lights up on the display.
➁Source selecting mode
Select the source (TUNER or CD) to be played
by pressing the corresponding input selector
button.
* If “TUNER” is selected, soon it is changed to
the frequency display mode. In this mode, you
can select the station to listen to by the timer
play by using the PRESET/BAND button and
/
button.
E-49
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE BUILT-IN TIMER
➂ON TIME/time setting mode
[“ON TIME” appears on the display, and soon it
is changed to a time setting mode.]
Set to the time when you want to begin the timer
play by using the HOUR button and the MIN
button.
POWER
TIMER
DISPLAY
➃OFF TIME/time setting mode
[“OFF TIME” appears on the display, and soon it
is changed to a time setting mode.]
O
T
D
V
If necessary, set to the time when you want to
finish the timer play (to turn this system into the
standby mode) by using the HOUR button and
the MIN button. Even if you do not set the time, it
has already been set so that the timer play
finishes after 1 hour.
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
HOUR
MIN
PHONES
/
OPEN/CLOSE
CD
T
POWER
Note
HOUR
MIN
The TIMER button functions also in the time (ON
TIME or OFF TIME) setting mode. (However, it also
turns this system into the standby mode.)
3 If you will not use this unit until the timer play
begins, turn this system into the standby mode by
pressing the POWER switch or the TIMER button.
PRESET
Note
TUNER
CD
If a timer play setting is made and this system is not
turned into the standby mode, the source set for the
timer play will begin playing when the time comes in
place of the source played at that time.
CENTER/REAR
/DELAY
LEVEL
C/R/D
PROGRAM
ON/OFF
TEST
DSP
AMP
SUBWOOFER
INPUT
To cancel the timer play setting
SLEEP
After the timer play is finished, press the DISPLAY
button to call the current time. While the current time is
displayed, press the TIMER button so that “TIMER”
goes out from the display.
VOLUME
POWER
POWER
If it is not canceled, the system will be turned on at the
same time every day, so it can be used as an alarm.
However, if you are planning to go out at that time,
cancel the timer play setting.
* Unless the AC supply lead is unplugged or there is a
power failure for more than 5 minutes, the time set
on the timer will be retained until it is reset.
How to make time setting in the ON TIME
or OFF TIME mode
For the hour:
Press the HOUR button to change the hour to a higher
value. Press and hold to change continuously.
For the minute:
Use the MIN button and operate it in the same way as
you did to change the hour.
E-50
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE BUILT-IN TIMER
SLEEP TIMER OPERATION
This system can be turned into the standby mode
automatically.
1 Play the desired sound source.
2 Press the SLEEP button. “SLEEP” appears on the
POWER
display, and soon it is replaced by “2h00m”.
3 Press the SLEEP button repeatedly until the desired
sleep time appears on the display.
The display will change as described below. [Time is
displayed by the hour (h) and the minute (m).]
MEMORY
AUTO/MAN’L PRESET/BAND
DISPLAY
VIDEO
2
TIME ADJ
TIMER
/
/
REPEAT
2h00m
1h30m
1h00m
0h30m
HOUR
MIN
PHONES
/
↑
OPEN/CLOSE
CD
POWER
OFF SLEEP
(Sleep timer is off.)
* The original display mode will resume about 4
seconds after the selection is made.
* The SLEEP indicator will light up to indicate that
the sleep timer is on.
4 The system will turn into the standby mode
automatically when the selected sleep time passes.
To confirm the sleep time setting
Press the SLEEP button once. “SLEEP” appears on
the display, and soon it is replaced by the remaining
time of the selected sleep time.
PRESET
TUNER
CD
To change the sleep time
CENTER/REAR
/DELAY
LEVEL
C/R/D
While the SLEEP indicator is illuminated, press the
SLEEP button repeatedly until the desired time appears.
PROGRAM
ON/OFF
TEST
DSP
AMP
SUBWOOFER
INPUT
To stop the sleep timer operation
Press the POWER switch, or press the SLEEP button
repeatedly until “OFF SLEEP” appears on the display.
(The SLEEP indicator will go out.)
SLEEP
SLEEP
POWER
VOLUME
POWER
Using the timer and the sleep timer
at the same time
1 Prepare timer play. (See page 49 and 50.)
* Do not turn this system into the standby mode
after the timer setting is finished.
2 Press the SLEEP button and set the sleep time.
When the sleep timer operation finishes, the timer
begins functioning to turn the source on at the preset
time.
Note
Do not make the timer time setting so that the timer will
start during sleep timer operation. (Since sleep timer
operation has priority, the timer will not operate.)
E-51
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If your unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your
authorized YAMAHA dealer or service center for help.
SYMPTOM
CAUSE
REMEDY
No power even if the POWER switch is AC supply lead is not plugged in.
pressed.
Plug in the AC supply lead.
It happens that this system does not
work normally.
There is an influence of strong external
noise (lightning, excessive static
electricity, etc.) or a misoperation on this
system while using this system.
Turn this system into the standby mode and
disconnect the AC power cord from the AC outlet.
After about 30 seconds have passed, connect the
power and operate this system again.
No sound from one speaker
No sound from speakers.
Loose speaker connections.
Connect properly.
Internal protection circuit is functioning.
Unplug the AC supply lead from the wall AC outlet,
and then plug in again.
No sound from the rear speakers.
One rear speaker connection is loose or
bad.
Connect it properly.
The sound output level to the rear
speakers is set to minimum.
Raise the sound output level to the rear speakers.
No DSP program is selected.
Select the appropriate program.
No sound from the center speaker.
The sound output level to the center
speaker is set to minimum.
Raise the sound output level to the center speaker.
Incorrect DSP program selection.
No DSP program is selected.
Select the appropriate program.
No sound (or no picture) from an
external unit connected with this
system.
Incorrect cord connections.
Connect the cords properly. If the problem persists,
the cords may be defective.
Input source selection is not proper.
Current time is not set.
Make a proper input source selection.
Set current time.
Can’t set timer.
This unit will not operate properly.
The internal microcomputer has been
frozen by an external electric shock
(lightning, excessive static electricity, etc.)
or power supply with low voltage.
Unplug the AC supply lead from the wall AC outlet,
and then plug in again after about one minute.
Excessive static in FM broadcasts.
Interference from starting motor of nearby
car.
Position the FM antenna as high and as far away
from nearby roads as possible. Connect using a
coaxial cable.
Interference from thermostat of nearby
electrical appliance.
Noise increases during stereo
broadcasts.
Antenna input is too weak due to obstructions or
excessive distance from broadcasting station.
Check antenna connections.
Install a multi-element type FM antenna if possible.
Stereo broadcasts are noisy and ST
indicator blinks on and off.
Insufficient antenna input.
Install an antenna appropriate for the electric field
strength of your area.
Cannot select preset stations.
Preset memory has been erased.
Reprogram memory presets.
Buzzing or static during AM (LW or
MW) broadcasts.
Interference from source such as lightning, Problem is difficult to eliminate but can be lessened
flourescent lights, electric motors or
by grounding MW/LW (AM) loop antenna.
thermostat of nearby electrical appliance.
TV or microprocessor is being used
nearby.
Move away from TV or microprocessor.
AM (LW or MW) broadcast sensitivity is Radio signal is weak or antenna is not
Properly connect MW/LW (AM) loop antenna.
Change orientation of MW/LW (AM) loop antenna.
Install an external MW/LW (AM) antenna.
Load disc label side up.
poor.
properly connected.
Playback will not begin even if disc is
loaded.
Disc is upside down.
Disc is dirty.
Clean disc.
Press the CD input selector button.
Clean disc.
Input selector setting is incorrect.
Disc is dirty.
No sound.
Sound stops suddenly (always at same
spot).
Lower volume.
Volume is set too high.
Batteries are dead.
Remote control doesn’t work.
Replace batteries.
Use within 6 m and 60° radius.
Remote control is too far away or is being
used at incorrect angle.
Change position of the main unit.
Direct sunlight or lighting (of an inverter
type of flourescent lamp etc.) is striking
the remote control sensor of the main unit.
Relocate this unit away from the TV or cover TV’s
remote control sensor.
TV functions strangely when the remote
control is used.
Remote control is being used near TV set
with a remote control sensor.
E-52
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
As a part of policy of continuous improvement, YAMAHA reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units.
■Amplifier section
■Tuner section
Minimum RMS Output Power per Channel
Front L, R
Tuning Range
FM
6 ohms, 1 kHz, 10% THD ...................... 30W+30W
Center
6 ohms, 1 kHz, 10% THD ................................ 30W
Rear L, R
[U.S.A. and Canada models] ...... 87.5 to 107.9 MHz
[U.K., Europe, Australia, Singapore
and General models]................... 87.5 to 108.0 MHz
AM (MW)
6 ohms, 1 kHz, 10% THD ...................... 30W+30W
Subwoofer
4 ohms, 100 Hz, 10% THD .............................. 50W
[
U.S.A., Canada and General models]
........................................................ 530 – 1,710 kHz
U.K., Europe, Australia and Singapore models]
........................................................ 531 – 1,611 kHz
LW
U.K. and Europe models only] ...... 153 – 288 kHz
[
DIN Standard Output Power per Channel [Europe
model only]
[
6 ohms, 1 kHz, 1% THD..................................... 25W
Usable Sensitivity
IEC Power [Europe model only]
FM (75 ohms)
6 ohms, 1 kHz, 0.1% THD.................................. 20W
(30 dB S/N Quieting, 1 kHz, 100% mod.)
[U.S.A., Canada, Singapore and General
Input Sensitivity/Impedance
AUX ............................................. 120 mV/20 k-ohms
models]........................................1.5 µV (14.8 dBf)
(DIN, Mono, S/N 26 dB)
[
U.K., Europe and Australia models].........1.8 µV
Headphone Output Impedance.................... 68 ohms
AM (MW) ..................................................... 280 µV/m
LW [U.K. and Europe models only].......... 560 µV/m
Total Harmonic Distortion (1 kHz)
TAPE/MD to SP OUT (12.5W/6 ohms) ........... 0.08%
■CD player section
Signal-to-Noise Ratio (IHF-A Network)
TAPE/MD (Input Shorted) ............................... 85 dB
Type ................................................. Single CD Player
Signal Readout
..... Non-contact, 3-beam semi-conductor laser pick-up
■Video section
Video Signal Level ............................ 1 Vp-p/75 ohms
D/A Converter ............................................. 1-bit DAC
Filter ...........................8-time oversampling digital filter
Wow and Flutter ...................Below measurable limits
Maximum Input Level ...................... 1.5 Vp-p or more
Signal-to-Noise Ratio .......................... 50 dB or more
Monitor Out Frequency Response
...................................................5 Hz to 10 MHz, –3 dB
E-53
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
■Speaker section
■General
Type
Power Supply
Front, Center, Rear ..................... 1-Way, 1-Speaker,
Acoustic-Suspension Type
(Magnetically-Shielded Type)
Subwoofer .......................... Active Servo Processing
Speaker System
[U.S.A. and Canada models] ......... AC 120V, 60 Hz
[U.K., Europe and Singapore models]
...........................................................AC 230V, 50 Hz
[Australia model] ............................ AC 240V, 50 Hz
[General model]
(Magnetically-Shielded Type)
.................................AC 110/120/220/240V, 60/50 Hz
Speakers
Power consumption ......................................... 160W
Front, Center, Rear............................... 8 cm (3-1/8”)
Subwoofer........................................... 20 cm (7-7/8”)
Dimensions (W x H x D)
SW-AV1 .................................... 250 x 425 x 418 mm
(9-13/16” x 16-3/4” x 16-7/16”)
Maximum Power Handling Capacity
Front, Center, Rear............................... 30W (13.5V)
Subwoofer ............................................. 50W (14.2V)
TCD-AV1 ..................................... 320 x 70 x 258 mm
(12-5/8” x 2-3/4” x 10-3/16”)
NX-AV1 ....................................... 94 x 117 x 108 mm
(3-11/16” x 4-5/8” x 4-1/4”)
Impedance
Front, Center, Rear........................................ 6 ohms
Subwoofer...................................................... 4 ohms
Weight
SW-AV1 ................................ 14.5 kg (31 lbs. 14 oz.)
TCD-AV1 ................................... 2.6 kg (5 lbs. 12 oz.)
NX-AV1 ....................................... 0.7 kg (1 lbs. 9 oz.)
E-54
Download from Www.Somanuals.com. All Manuals Search And Download.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B.
J
A
WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VZ30070
Download from Www.Somanuals.com. All Manuals Search And Download.
|