G
DVD PLAYER
LECTEUR DE DVD
DVD-S550
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
GEBRUIKSAANWIJZING
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
Download from Www.Somanuals.com. All Manuals Search And Download.
VAROITUS
Muiden kuin tässä esitettyjen toimintojen säädön tai
asetusten muutto saattaa altistaa vaaralliselle säteilylle
tai muille vaarallisille toiminnoille.
Important notes for users in the
U.K.
Mains plug
DK
This apparatus is fitted with an approved 13
Amp plug. To change a fuse in this type of plug
proceed as follows:
Advarsel: Usynlig laserstråling ved åbning når
sikkerhedsafbrydere er ude af funktion. Undgå
utsættelse for stråling.
1 Remove fuse cover and fuse.
Bemærk: Netafbryderen STANDBY/ON er
sekundært indkoblet og ofbryder ikke strømmen fra
nettet. Den indbyggede netdel er derfor tilsluttet til
lysnettet så længe netstikket sidder i stikkontakten.
2 Fix new fuse which should be a BS1362 5 Amp,
A.S.T.A. or BSI approved type.
3 Refit the fuse cover.
N
If the fitted plug is not suitable for your jack
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5 Amp. If a plug without a fuse
is used, the fuse at the distribution board should
not be greater than 5 Amp.
Observer: Nettbryteren STANDBY/ON er sekundert
innkoplet. Den innebygdenetdelen er derfor ikke
frakoplet nettet så lenge apparatet er tilsluttet
nettkontakten.
S
Klass 1 laseraparat
Varning! Om apparaten används på annat sätt än i
denna bruksanvisning specificerats, kan användaren
utsättas för osynlig laserstrålning, som överskrider
gränsen för laserklass 1.
Note: The severed plug must be disposed to avoid
a possible shock hazard should it be inserted into
a 13 Amp jack elsewhere.
Observera! Strömbrytaren STANDBY/ON är
sekundärt kopplad och inte bryter inte strömmen från
nätet. Den inbyggda nätdelen är därför ansluten till
elnätet så länge stickproppen sitter i vägguttaget.
How to connect a plug
The wires in the mains lead are coloured with
the following code: blue = neutral (N),
brown = live (L).
SF
● As these colours may not correspond with the
colour markings identifying the terminals in your
plug, proceed as follows:
– Connect the blue wire to the terminal
marked N or coloured black.
– Connect the brown wire to the terminal
marked L or coloured red.
– Do not connect either wire to the earth
terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Luokan 1 laserlaite
Varoitus! Laitteen käyttäminen muulla kuin tässä
käyttöohjeessa mainitulla tavalla saattaa altistaa
käyttäjän turvallisuusluokan 1 ylittävälle
näkymättömälle lasersäteilylle.
Oikeus muutoksiin varataan. Laite ei saa olla alttiina
tippu-ja roiskevedelle.
Toiminnanvalitsin STANDBY/ON on kytketty
toisiopuolelle, eikä se kytke laitetta irti sähköverkosta.
Sisäänrakennettu verkko-osa on kytkettynä
sähköverkkoon aina silloin, kun pistoke on
pistorasiassa.
Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath of
the lead - not simply over the two wires.
VARO!
Copyright in the U.K.
AVATTAESSA JA SUOJALUKITUS
OHITETTAESSA OLET ALTTIINA
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
ÄLÄ KATSO SÄ TEESEEN.
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performer’s Protection Acts 1958 to 1972.
VARNING!
OSYNLIG LASERSTRÅLNING NÄR DENNA
DEL ÄR ÖPPNAD OCH SPÄRREN ÄR
URKOPPLAD. BETRAKTA EJ STRÅLEN.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
The unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this unit
itself is turned off. This state is called the standby mode. In
this state, this unit is designed to consume a very small
quantity of power.
CAUTION
Use of controls or adjustments or performance
of procedures other than those specified herein
may result in hazardous radiation exposure.
ATTENTION
L’appareil n’est pas isolé de la source d’alimentation aussi
longtemps qu’il reste branché sur une prise murale, même
lorsqu’il est éteint. Il est alors dit en mode «Veille». Dans
ce mode, l’appareil consomme très peu de courant.
L’emploi de commandes, de réglages ou un
choix de procédures différents des
spécifications de cette brochure peut entraîner
une exposition à d’éventuelles radiations
pouvant être dangereses.
Das Gerät ist nicht vom Netz getrennt, solange der
Netzstecker noch mit der Wandsteckdose verbunden ist,
selbst wenn das Gerät ausgeschaltet wurde. Dieser
Betriebszustand wird als Bereitschaftsmodus bezeichnet. In
diesem Zustand nimmt das Gerät eine sehr geringe Menge
Strom auf.
ACHTUNG
Die Verwendung von Bedienungselementen
oder Einstellungen oder die Durchführung von
Bedienungsvorgängen, die nicht in dieser
Anleitung aufgeführt sind, kann zu einem
Kontakt mit gefährlichen Laserstrahlen führen.
Enheten är inte urkopplad från nätet så länge som den är
ansluten till vägguttaget även om enheten i sig självt är
avstängd. Detta kallas för beredskapsläge och i detta
tillstånd konsumerar apparaten minimalt med ström.
OBSERVERA
Användning av kontroller och justeringar eller
genomförande av procedurer andra än de som
specificeras i denna bok kan resultera i att du
utsätter dig för farlig strålning.
De stroomtoevoer naar het toestel is niet afgesloten
zolang de stekker nog in het stopcontact zit, zelfs niet als
het toestel zelf uitgeschakeld is. Deze toestand wordt
“standby” (waak- of paraatstand) genoemd. Het toestel is
ontworpen om in deze toestand.
VOORZICHTIG
Gebruik van bedieningsorganen of instellingen,
of uitvoeren van handelingen anders dan staan
beschreven in deze handleiding kunnen leiden
tot blootstelling aan gevaarlijke stralen.
Данное устройство не отсоединено от источника
переменного напряжения до тех пор, пока оно
подключено к настенной розетке, даже если само
данное устройство выключено. Это состояние
называется режимом готовности. В этом
состоянии данное устройство потребляет очень
малое количество электроэнергии.
ПРЕДУПРЕЖДЕНИЕ
Использование органов управления или
настроек или выполнение процедур, отличных
от описанных в данном руководстве, могут
привести к опасному облучению.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN. AVOID EXPOSURE TO BEAM.
ADVARSEL
SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
UNDGÅ UDSÆTTELSE FOR STRÅLING.
ADVARSEL
SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL
ÅPNES. UNNGÅ EKSPONERING FOR STRÅLEN.
VARNING
SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR
DENNA DEL ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.
VARO!
AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA
NÄKYMÄTTÖMÄLLE LASER SÄ TEILYLLE. ÄLÄ KATSO
SÄTEESEEN.
VORSICHT
SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG
WENN ABDECKUNG GEÖFFNET. NICHT DEM
STRAHL AUSSETSEN.
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN
DO NOT STARE INTO BEAM
DANGER
DANGER: INVISIBLE LASER RADIATION WHEN OPEN
AVOID DIRECT EXPOSURE TO THE BEAM
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN. AVOID DIRECT EXPOSURE TO BEAM.
ATTENTION
RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS
D’OUVERTURE. EXPOSITION DANGEREUSE AU
FAISCEAU.
ПРЕДУПРЕЖДЕНИЕ
ПРИ ОТКРЫТИИ УСТРОЙСТВА ВЫ МОЖЕТЕ
ПОДВЕРГНУТЬСЯВОЗДЕЙСТВИЮВИДИМОГО
И НЕВИДИМОГО ЛАЗЕРНОГО ИЗЛУЧЕНИЯ.
ИЗБЕГАЙТЕ ВОЗДЕЙСТВИЯ ЛУЧА.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
14 Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any
service is needed. The cabinet should never be
opened for any reason.
15 When not planning to use this unit for long
periods of time (i.e., vacation), disconnect the AC
power plug from the wall outlet.
16 Be sure to read the “TROUBLESHOOTING”
section on common operating errors before
concluding that this unit is faulty.
17 Before moving this unit, press STANDBY/ON to
set the unit in standby mode, then disconnect the
AC power plug from the wall outlet.
Install this sound system in a well ventilated, cool,
dry, clean place — away from direct sunlight, heat
sources, vibration, dust, moisture, or cold. In a
cabinet, allow about 2.5cm (1 inch) of free space
all around this unit for adequate ventilation.
Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
Do not expose this unit to sudden temperature
changes from cold to hot, nor locate this unit in
an environment with high humidity (i.e., a room
with a humidifier) to prevent condensation inside
this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
Avoid installing this unit in a location where
foreign objects may fall onto this unit or where
this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage
and/or discoloration on the surface of this unit.
– Burning objects (i.e., candles), as they may
cause fire, damage to this unit, and/or personal
injury.
– Containers with liquid in them, as they may fall,
spilling the liquid and causing an electrical
shock to the user and/or damage to this unit.
Do not cover this unit with a newspaper,
tablecloth, curtain, etc. in order not to obstruct
heat radiation. If the temperature inside this unit
rises, it may cause fire, damage to this unit, and/or
personal injury.
Do not plug in this unit to a wall outlet until all
connections are complete.
Do not operate this unit upside-down. It may
overheat, possibly causing damage.
3
4
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
5
When playing DTS encoded CDs, excessive noise will
be heard from the analog stereo outputs. To avoid
possible damage to the audio system, the consumer
should take proper precautions when the analog
stereo outputs of the player are connected to an
amplification system. To enjoy DTS Digital
Surround™ playback, an external 5.1-channel DTS
Digital Surround™ decoder system must be
connected to the digital output of the player.
6
LASER SAFETY
This unit employs a laser. Due to possible eye injury,
only a qualified service person should remove the
cover or attempt to service this device.
7
8
9
DANGER
This unit emits visible laser radiation when open.
Avoid direct eye exposure to beam.
When this unit is plugged into a wall outlet, do not
place your eyes close to the opening of the disc tray
and other openings or look inside.
Do not use excessive force on switches, knobs
and/or cords.
10 When disconnecting the power cord from the
wall outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12 Use only the voltage specified on this unit. Using
this unit with a higher voltage than specified is
dangerous and may cause fire, damage to this
unit, and/or personal injury. YAMAHA will not be
held responsible for any damage resulting from
use of this unit with a voltage other than as
specified.
13 To prevent damage by lightning, disconnect the
power cord from the wall outlet during an
electrical storm.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Special VCD & SVCD Features.................................. 13
Playback Control (PBC)....................................................... 13
Preview Function...................................................................... 13
Playing MP3/DivX/JPEG/Kodak Picture CD............... 14
General Operation.................................................................. 14
Selecting a folder and track/file......................................... 15
Repeat and Shuffle................................................................... 15
Special picture disc features ....................................... 15
Preview Function (JPEG)...................................................... 15
Zoom picture............................................................................. 16
Playback with multi-angles................................................... 16
Scan Effect.................................................................................... 16
Playing MP3 music and JPEG picture
Introduction
Region Codes....................................................................2
Supplied accessories........................................................2
Notes about discs............................................................2
Cleaning discs....................................................................2
Patent information...........................................................2
Functional Overview
Front and Rear Panels.....................................................3
Remote Control...............................................................4
Preparation
simultaneously............................................................................ 16
General Notes on connections....................................5
Digital Connections.........................................................5
Analog Connections........................................................5
Video Connections..........................................................6
S-Video terminal <A>..............................................................6
Composite Video terminal <B>.........................................6
Component Video terminal <C>......................................6
SCART Connection <D>......................................................6
Setup Menu
General Setup menu..................................................... 17
Locking/Unlocking the disc for viewing........................ 17
Dimming player’s front panel display............................ 17
Programming disc tracks (not for Picture CD/
MP3)................................................................................................ 17
OSD Language........................................................................... 18
Screen Saver................................................................................ 18
Sleep Timer................................................................................. 18
DivX® VOD registration code ........................................ 19
Audio Setup Menu ........................................................ 19
Setting the analog output.................................................... 19
Setting the Digital output..................................................... 20
CD Upsampling......................................................................... 20
Night Mode................................................................................. 21
Video Setup Menu......................................................... 21
TV Type......................................................................................... 21
Setting the TV Display........................................................... 21
Progressive................................................................................... 22
Picture Setting............................................................................ 22
Switching the YUV/RGB....................................................... 23
Preference Setup Menu ............................................... 24
Audio, Subtitle, Disc Menu................................................. 24
Restricting playback by Parental Control.................... 24
PBC (Playback Control)....................................................... 24
MP3/JPEG Menu....................................................................... 25
Changing the Password........................................................ 25
Restoring to original settings.............................................. 25
Getting Started
Inserting batteries into the Remote Control............7
Using the remote control.......................................................7
Turning on the power ....................................................7
Selecting the color system that corresponds
to your TV.........................................................................7
Setting language preference...........................................8
Setting the OSD Language.....................................................8
Setting the Audio, Subtitle and Disc menu
language.............................................................................................9
Disc Operations
Basic Playback.................................................................10
General Operation........................................................10
Pausing playback........................................................................10
Selecting track/chapter...........................................................10
Searching backward/forward..............................................10
Stopping playback.....................................................................10
Selecting various repeat/shuffle functions ................11
Repeat and Shuffle...................................................................11
Repeating a section within a chapter/track................11
Operations for video playback (DVD/VCD/SVCD) ..11
Using the Disc Menu..............................................................11
Zooming in...................................................................................11
Resuming playback from the last stopped point.....11
On-Screen Display (OSD)..................................................12
Special DVD Features...................................................13
Playing a Title ..............................................................................13
Camera Angle.............................................................................13
Audio...............................................................................................13
Subtitles..........................................................................................13
Language Code .......................... 26
Troubleshooting ........................ 28
Glossary ...................................... 30
Specifications ............................. 31
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing this unit. This
Owner’s Manual explains the basic
operation of this unit.
– Do not use a disc printed on its surface by
a commercially available label printer.
Cleaning discs
Region Codes
• When a disc becomes dirty, clean it
with a cleaning cloth. Wipe the disc
from the centre out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine,
thinner, commerciallyavailablecleaners,
or antistatic spray intended for analog
records.
DVD discs must be labeled for
ALL regions or Region 2 in
order to play on this Player. You
cannot play Discs that are
labeled for other regions.
ALL
2
Supplied accessories
– Remote control
– Batteries (two AA size) for remote
control
– Audio pin cable
– Video pin cable
– Owner’s Manual
Patent information
Manufactured under license from
Dolby Laboratories. “Dolby” and
the double-D symbol are
trademarks of Dolby
Laboratories.
Notes about discs
”DTS” and “DTS Digital Out” are
trademarks of Digital Theater
Systems, Inc.
– This unit is designed for use with DVD
video, Video CD, Super video CD, Audio CD,
CD-R, CD-RW, DVD+RW, DVD+R, DVD-R
and DVD-RW.
DivX, DivX Certified, and
associated logos are trademarks
of DivXNetworks, Inc and are
used under license.
This unit can play:
– MP3, picture (Kodak, JPEG) files on CD-
R(W).
– JPEG/ISO 9660 format
– Maximum 30 characters display.
– DivX disc on CD-R[W]/DVD+R[W]/
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless
®
DVD-R[W] (3.11, 4.x and 5.x)
– CD-R and CD-RW cannot be played unless
finalized.
– Some discs cannot be played depending on
the recording conditions such as PC
environment and application software. The
characteristics and condition of the discs;
materials, scratches, curvature, and etc.,
may result in failure.
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
– Be sure to use only CD-R and CD-RW discs
made by reliable manufacturers.
– Do not use any non standard shaped discs
(heart, etc.)
– Do not use disc with tape, scals, or paste on
it, damage to the unit may result.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Front and Rear Panels
STANDBY/ON
– turns on this unit or sets it to the
standby mode
9STOP
– stops playback
;PAUSE
– pauses playback
Disc tray
/OPEN/CLOSE
– opens or closes the disc tray
BPLAY
– starts playback
PROGRESSIVE indicator
– lights up when the unit enters
Progressive mode
Front panel display
– shows information about the
operational status of the unit
* Press button for about two seconds.
AUDIO OUT (Left/Right)
– connect to AUDIO inputs
of your AV receiver
AC Power Cord
– connects to a standard AC outlet
COAXIAL digital audio output
– connects to a digital (coaxial) input of
your AV receiver or stereo system
or stereo system
AV terminal
– connects to a SCART cable
OPTICAL digital audio output
– connects to a digital (optical) input of
your AV receiver or stereo system
COMPONENT video outputs
– connect to an AV receiver with Y
PB/CB PR/CR inputs
VIDEO output
S VIDEO output
– connects to an S-Video input on
your AV receiver
(composite video out)
– connects to a video input on your AV
receiver
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Remote Control
|
TOP MENU/RETURN
– display the top-level disc menu
(DVD) / go back to previous
menu (VCD)
B/
– turn this unit ON or go to
standby-on mode
1
2
5
8
0
3
6
4
0-9 numeric keypad
– select numbered items in a
menu
MENU
– access menu of a disc (DVD) /
switch PBC on/off (VCD)
7
9
TOP MENU RETURN
ON SCREEN
MENU
SETUP
ON SCREEN
1 2 3 4
– (left/right/up/down) select an
item in the menu
– access or remove player’s On
Screen Display menu
ENTER
OK
SETUP
STOP
PLAY
PAUSE
ENTER/OK
– access or remove player’s
setup menu
– acknowledge menu selection
SUBTITLE ANGLE ZOOM AUDIO
REPEAT
A
B
SCAN MUTE
S
– search backward* / go to a
previous chapter or track
T
DVD
– search forward* / next chapter
or track
STOP ( 9)
– stop playback
SUBTITLE
– subtitle language selector
PLAY ( B)
– start playback
ANGLE
– select DVD camera angle
PAUSE ( ;)
– pause playback temporarily /
frame-by-frame playback
ZOOM
– enlarge video image
AUDIO
REPEAT
– repeat chapter, track, title, disc
/ shuffle chapter, track
– audio language and format
selector
A-B
– repeat a specific segment
SCAN
– preview the content of a track
or whole disc (VCD) / play the
first 6 seconds or less of each
track (CD)
MUTE
– disable or enable sound output
* Press and hold button for about two seconds.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Note:
General Notes on connections
– If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all. Make
sure to select the appropriate audio format
at menu screen included on the disc.
Pressing AUDIO once or more may change
not only audio languages but also audio
formats, and the selected format appears
for several seconds on the status window.
Never make or change connections with
the power switched on.
• Depending on the equipment you wish
to connect, there are various ways you
could connect this unit. Possible
connections are shown in the following
drawings.
• Please refer to the manuals of other
equipment as necessary to make the
best connections.
• Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
• Do not connect this unit’s audio out
jack to the phono in jack of your audio
system.
Analog Connections
Use audio/video cable supplied with this
unit to connect AUDIO OUT L (left) and
R (right) jacks of this unit to corresponding
input jacks of your audio equipment such
as Stereo amplifier.
Digital Connections
This unit has COAXIAL and OPTICAL
digital out jacks. Connect one or both of
them to your AV receiver equipped with
Dolby digital, DTS, or MPEG decoder
using each specific cable (separate
purchase).
R
L
(supplied)
Stereo
R
L
amplifier
1
CD/DVD
R
L
C
O
AV receiver
COAXIAL
IN
OPTICAL
IN
Right
speaker
Left
speaker
Subwoofer
Center
speaker
Left front
speaker
Rightfront
speaker
Right surround
speaker
Leftsurround
speaker
Surround
back speaker
You will need to set this unit’s digital
output to ALL (see page 20
“DIGITAL OUTPUT”).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
S-Video terminal <A>
Video Connections
S (separate) video connection achieves a
clearer picture than composite video
connection by separating color and
luminance when transmitting signals. Use
commercially available S-video cable.
Receiver (and TV) with S-video input is
required.
If your AV receiver has video output jacks,
connect your receiver (and then to your
TV) so that you can use one TV for several
different video sources (LD, VCR etc.) by
simply switching the input source selector
of your receiver.
The player has three types of video output
jacks. Use one of them in accordance with
the input jacks of the equipment to be
connected.
Composite Video terminal <B>
Use audio/video cable supplied with this
unit when connecting the player to a TV.
Component Video terminal <C>
Component video connection achieves
high fidelity in reproducing colors (better
performance than S-video connection),
separating video signal into luminance (Y,
terminal color-coded as green), and color
difference (Pb, blue/Pr, red). Use
(supplied)
V
<A>
<B>
<C>
<D>
S
Y
PBCB
PRCR
commercially available coaxial cables.
Receiver (and TV) with component input is
required. Observe the color of each jack
when connecting. If your receiver does not
have component output jacks, connecting
the player’s component output directly to
your TV’s component input can reproduce
better video image.
S VIDEO
INPUT
VIDEO COMPONENT
VIDEO IN
AV receiver
VIDEO
OUT
COMPONENT
S VIDEO
VIDEO OUT OUT
VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
IN
Note:
– You need to set this unit’s component
output to YUV (see page 23 “Switching the
YUV/RGB”).
SCART Connection <D>
If your TV has only terminal for video
input, and you want to connect it directly
to this unit, you can use this unit’s SCART
output jack.
Note:
– Ensure that the “TV” indication on SCART
cable is connected to the TV set and “DVD”
indication on SCART cable is connected to
this unit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step1: Inserting batteries
into the Remote Control
Step2: Turning on the power
1 Connect the AC power cord to the power
outlet.
2 Turn on the TV and your AV receiver.
3
3 Select the appropriate input source at the
AV receiver that was used to connect to
this unit. Refer to the equipment owner’s
manual for detail.
1
2
4 Turn this unit on.
1 Open the battery compartment.
5 Set the TV to the correct Video IN
channel. (eg. EXT1, EXT2, AV1, AV2,
AUDIO/VIDEO, etc. Refer to your TV
owner’s manual for detail)
2 Insert two batteries type R06 or AA,
following the indications (+ –) inside the
compartment.
➜ The front display lights up and the
default screen appears on the TV.
3 Close the cover.
Using the remote control
Step3: Selecting the color
system that corresponds to
your TV
Remote control
sensor
This DVD Player is compatible with both
NTSC and PAL. Select the color system
that matches your TV.
Point the remote control
at the sensor, within
approximately 6 m
(20 feet) of the unit.
VIDEO SETUP PAGE
TV TYPE
PAL
TV DISPLAY
NTSC
MULTI
PROGRESSIVE
PICTURE SETTING
COMPONENT
Handling the remote control
• Do not spill water or other liquids on
the remote control.
• Do not drop the remote control.
• Do not leave or store the remote
control in the following types of
conditions:
1 Press SETUP.
2 Press 2repeatedly to select {VIDEO
SETUP PAGE}.
3 Press 34to highlight {TV TYPE}, then
press 2.
– high humidity such as near a bath
– high temperature such as near a heater
or stove
– extremely low temperature
– dusty places
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
4 Press 34to highlight one of the options
Step4: Setting language
preference
below:
PAL
Select this if the connected TV is PAL
system. It will change the video signal of a
NTSC disc and output in PAL format.
You can select your own preferred
language settings.This DVD Player will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc’s default language will be used
instead. The OSD language in the system
menu, will remain once selected.
NTSC
Select this if the connected TV is NTSC
system. It will change the video signal of a
PAL disc (VCD only) and output in NTSC
format.
MULTI
Setting the OSD Language
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
GENERAL SETUP PAGE
DISC LOCK
DISPLAY DIM
PROGRAM
5 Select an item and press ENTER/OK.
Helpful Hint:
OSD LANGUAGE
SCREEN SAVER
SLEEP
ENGLISH
DANISH
– Before changing the current TV
Standard setting, ensure that your TV
supports the ‘selected TV Type’
system.
GERMAN
SPANISH
FRENCH
DIVX(R) VOD CODE
– If there is not proper picture on your
TV, wait for 15 seconds for auto
recover.
1 Press SETUP.
2 Press 12to select {GENERAL SETUP
PAGE}.
3 Press 34to highlight {OSD LANGUAGE},
then press 2.
CHANGING PAL TO NTSC
1. ENSURE THATYOUR TV SYSTEM SUPPORTS
NTSC STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15 SECONDS
FOR AUTO RECOVER.
4 Press 34to select a language and press
ENTER/OK.
OK
Cancel
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Setting the Audio, Subtitle and
Disc menu language
PREFERENCE PAGE
AUDIO
ENGLISH
DANISH
GERMAN
SPANISH
FRENCH
ITALIAN
DUTCH
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
PASSWORD
DEFAULT
1 Press STOP 9twice, then press SETUP.
2 Press 2repeatedly to select
{PREFERENCE PAGE}.
3 Press 34to highlight one of the options
below at a time, then press 2.
– ‘Audio’ (disc’s soundtrack)
– ‘Subtitle’ (disc’s subtitles)
– ‘Disc Menu’ (disc’s menu)
4 Press 34to select a language and press
ENTER/OK.
If the language you want is not in the
list, then select {OTHERS},
then use the numeric keypad (0-9) on
the remote to enter the 4-digit language
code (see page 26 “Language Code”) and
press ENTER/OK.
5 Repeat steps 3–4 for other language
settings.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
IMPORTANT!
General Operation
– If the inhibit icon ( or X) appears
on the TV screen when a button is
pressed, it means the function is
not available on the current disc or
at the current time.
Unless otherwise stated, all operations
described are based on Remote Control
use.
– Depending on the DVD or VIDEO
CD, some operations may be
different or restricted.
– Do not push on the disc tray or put
any objects other than disc on the
disc tray. Doing so may cause the
disc player malfunction.
Pausing playback
1 During playback, press PAUSE ;.
➜ Playback will pause and sound will be
muted.
2 Press PAUSE ;again to select the next
picture frame.
3 To resume normal playback, press
PLAY B.
Basic Playback
1 Press STANDBY/ON on the front panel
to turn on the DVD player.
Selecting track/chapter
• Press S/ Tor use the numeric
keypad (0-9) to key in a track/chapter
number.
➜ If repeat mode is active, pressing S/
Twill replay the same track/chapter.
2 Press OPEN/CLOSE /on the front
panel to open disc loading tray.
3 Place the chosen disc in the tray, with the
label facing up.
4 Press OPEN/CLOSE /again to close
the tray.
Searching backward/forward
➜ After recognizing this disc, the player
begin to playback automatically.
➜ If you press PLAY Bwhen the tray is
open, this unit closes the tray and starts
playback.
• Press and hold S/ T, then press
PLAY Bto resume normal playback.
➜ While searching, pressing S/ T
again will decrease/increase the search
speed.
Stopping playback
• Press STOP 9.
TIPS: The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Selecting various repeat/shuffle
functions
Operations for video playback
(DVD/VCD/SVCD)
Repeat and Shuffle
Using the Disc Menu
• While playing a disc, press REPEAT
continuously to choose a ‘Play Mode’.
Depending on the disc, a menu may appear
on the TV screen once you load in the disc.
DVD
To select a playback feature or item
➔ RPT ONE (repeat chapter)
➔ RPT TT (repeat title)
➔ SHUFFLE (shuffle)
➔ RPT SHF (shuffle repeat)
➔ RPT OFF (repeat off)
• Use 1234or numeric keypad
(0-9) on the remote, then press
ENTER/OK to start playback.
To access or remove the menu
VCD/SVCD/CD
• Press MENU on the remote.
➔ RPT ONE (repeat track)
➔ RPT ALL (repeat disc)
➔ SHUFFLE (shuffle)
Zooming in
➔ RPT SHF (shuffle repeat)
➔ RPT OFF (repeat off)
This function allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
MP3/DivX
➔ RPT ONE (repeat track)
➔ RPT FLD (repeat folder)
➔ SHUFFLE (random play)
➔ RPT OFF (repeat off)
1 During playback, press ZOOM repeatedly
to display the picture with different scales.
➜ Use 1234to pan through the
enlarged picture.
Helpful Hint:
– For VCD, repeat playback is not possible if
the PBC mode is switched on.
➜ Playback will continue.
2 Press ZOOM repeatedly to return to the
original size.
Repeating a section within a
chapter/track
Resuming playback from the last
stopped point
Resume playback of the last 10 discs is
possible, even if the disc was ejected or the
power switched off.
• Load one of the last 10 discs.
➜ “LOADING” appears.
• Press PLAY Band the disc will be
played back from the last point.
1 While playing a disc, press A-B at your
chosen starting point.
2 Press A-B again at your chosen end point.
➜ The section A and B can be set only
within the same chapter/track.
➜ The section will now repeat
continuously.
3 To exit the sequence, press A-B.
To cancel resume mode
• In stop mode, press STOP 9again.
TIPS: The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Time Search (DVD/VCD)
On-Screen Display (OSD)
1 Press 34to select {TT TIME} or {CH
TIME} (DVD) or {TRACK TIME} or {DISC
TIME} (VCD).
OSD menu shows the disc playback
information (for example, title or chapter
number, elapsed playing time, audio/
subtitle language), a number of operations
can be done without interrupting disc
playback.
➜ {TT TIME} refers to the total time of the
current title, and the {CH TIME} refers
to the total time of the current chapter.
2 Press ENTER/OK.
1 During playback, press ON SCREEN.
➜ A list of available disc information
appears on the TV screen.
3 Enter hours, minutes and seconds from left
to right using the numeric buttons. (e.g.
0:34:27)
DVD
Audio/Subtitle/Angle (DVD)
MENU
You can change {AUDIO}, {SUBTITLE} or
{ANGLE} if available on the disc you are
playing.
TITLE
02/14
02/14
5.1CH
ENG
CHAPTER
AUDIO
SUBTITLE
1 Press 34to select {AUDIO}, {SUBTITLE}
BITRATE
or {ANGLE}.
2 Press ENTER/OK.
VCD/SVCD
3 For Audio and Subtitle,
Press 34to highlight your selection and
press ENTER/OK.
MENU
TRACK
02/14
DISC TIME
TRACK TIME
REPEAT
0:49:17
0:03:43
OFF
or
For Angle,
Select an angle using the numeric buttons.
BITRATE
Repeat/Time Display (DVD/VCD)
2 Press 34to view the information and
press ENTER/OK to access.
1 Press 34to select {REPEAT} or {TIME
DISP.}.
3 Use the numeric keypad (0-9) to input
the number/time or press 34to make the
selection, then press ENTER/OK to
confirm.
2 Press ENTER/OK.
3 Press 34to highlight your selection and
press ENTER/OK.
Time display (CD)
➜ Playback will change to the chosen time
or to the selected title/chapter/track.
Each time you press ON SCREEN, the
time display changes as follows;
Title/Chapter/Track selection (DVD/
VCD)
Total Elapsed
Single Remain
Total Remain
Single Elapsed
1 Press 34to select {TITLE} or
{CHAPTER} (DVD) or {TRACK} (VCD).
2 Press ENTER/OK.
3 Select a title, chapter or track number
using the numeric buttons.
TIPS: The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Special DVD Features
Playing a Title
Special VCD & SVCD Features
Playback Control (PBC)
1 Press MENU.
For VCD with Playback Control
(PBC) feature (version 2.0 only)
• Press MENU to toggle between ‘PBC
ON’ and ‘PBC OFF’.
➜ The disc title menu appears on the TV
screen.
2 Use 1234or numeric keypad (0-9)
to select a play option.
➜ If you select ‘PBC ON’, the disc menu (if
available) will appear on the TV.
➜ Use the S/ Tor the numeric
keypad (0-9) to select a play option.
• During playback, pressing TOP
MENU/RETURN will return to the
menu screen (if PBC is on).
3 Press ENTER/OK to confirm.
Camera Angle
• Press ANGLE repeatedly to select
different desired angle.
If you want to skip the index menu
and playback directly from the
beginning,
• Press MENU on the remote control to
switch to PBC off.
Audio
Changing the Audio Language and/or
format
• Press AUDIO repeatedly to select
different audio languages.
Preview Function
Subtitles
1 Press SCAN.
• Press SUBTITLE repeatedly to select
different subtitle languages.
2 Press 34to highlight {TRACK DIGEST},
{DISC INTERVAL} or {TRACK
INTERVAL}.
3 Press ENTER/OK to open one option.
SELECT DIGEST TYPE:
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL
Note:
– You can select {TRACK INTERVAL} only
during playback, with PBC Off.
TIPS: The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
TRACK DIGEST
Playing MP3/DivX/JPEG/Kodak
Picture CD
This function will minimize the picture of
every track in order to display every six of
these tracks on the screen to help you
know the content of every track on the
disc.
General Operation
1 Load a disc.
DISC INTERVAL
➜ The disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
➜ The data disc menu appears on the TV
screen.
This function is used to divide a disc into
six parts by regular intervals and display
them on one page to preview the whole
disc.
TRACK INTERVAL
2 Playback will start automatically. If not
press PLAY B.
This function is used to divide a single track
into six parts by regular intervals and
display them on one page to help you
preview the selected track.
00:00 00:00
001/020
Favorite
MP3
Piano
Cello
MP3
MP3
MP3
Jazz
Live
(example for 6 thumbnail pictures display)
4 Use 1234to select a track or use
numeric keypad (0-9) to input the
selected track number next to {SELECT}.
During playback, you can;
• Press S/ Tto select another
track/file in the current folder.
• Press ;to pause playback.
5 Press S/ Tto open the previous or
next page.
Helpful Hint:
6 Press ENTER/OK to confirm.
– It may not be possible to play certain MP3/
JPEG/DivX/MPEG-4 disc due to the
configuration and characteristics of the disc
or condition of the recording.
To quit preview function
• Use 1234to highlight {EXIT} and
press ENTER/OK to confirm.
To return to preview menu
• Use 1234to highlight {MENU} and
press ENTER/OK to confirm.
For CD
• At stop mode, press SCAN on the
remote control.
➜ Each track will be played for a few
seconds.
TIPS: The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Selecting a folder and track/file
Special picture disc features
1 Press 34to select the folder and press
ENTER/OK to open the folder.
1 Load a Picture disc (Kodak Picture CD,
JPEG).
2 Press 34to select a track/file.
➜ For Kodak disc, the slide show will
begin.
3 Press ENTER/OK to confirm.
➜ Playback will start from the selected file
to the end of the folder.
➜ For JPEG disc, the picture menu appears
on the TV screen.
2 Press PLAY Bto start the slide-show
playback.
Repeat and Shuffle
When the Picture CD/MP3 CD menu is
shown on the screen;
Preview Function (JPEG)
• Press REPEAT continuously to access
different ‘Play Mode’.
This function shows the content of the
current folder or the whole disc.
➜ FOLDER: files will be played back once.
➜ REPEAT ONE: one file being played
repeatedly.
➜ REPEAT FOLDER: all files in one folder
being played repeatedly.
1 Press STOP 9during playback.
➜ 12 thumbnail pictures will appear on the
TV screen.
➜ SHUFFLE: all files in the current folder
being played at random order.
2 Press S/ Tto display the other
pictures on the previous/next page.
3 Use 1234to highlight one of the picture
and press ENTER/OK to start playback
OR
Move the cursor to highlight
on the
bottom of the page to start playback from
the first picture on the current page.
4 Press MENU to return to Picture CD
menu.
TIPS: The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operations
Zoom picture
Playing MP3 music and JPEG
picture simultaneously
1 During playback, press ZOOM repeatedly
to display the picture with different scales.
1 Load a disc that contains music and
picture.
2 Use 1234to view the zoomed picture.
➜ The disc menu appears on the TV
screen.
Playback with multi-angles
2 Select an MP3 track.
• During playback, press 1234to
rotate the picture on the TV screen.
1: rotate the picture anti-clockwise
2: rotate the picture clockwise
3: flip the picture vertically
3 During MP3 music playback, select a
picture from the TV screen and press
PLAY B.
➜ The picture files will be played back one
4: flip the picture horizontally
after another until end of the folder.
4 To quit simultaneous playback, press
MENU followed by STOP 9.
Scan Effect
• Press ANGLE repeatedly to choose
different scan effect.
➜ Various of scan effect appears on the
Helpful Hint:
– Some files on Kodak or JPEG disc may be
distorted during playback due to the
configuration and characteristics of the disc.
top left hand corner on the TV screen.
TIPS: The operating features described here might not be possible for certain discs. Always refer to
the instructions supplied with the discs.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
The setup is carried out via the TV,
enabling you to customize the DVD Player
to suit your particular requirements.
Dimming player’s front panel
display
You can select different levels of
brightness for the front panel display.
General Setup menu
1 In ‘GENERAL SETUP PAGE’, press 34to
highlight {DISPLAY DIM}, then press 2.
1 Press SETUP.
2 Press 12to select ‘General Setup’ icon.
3 Press ENTER/OK to confirm.
100%
Select this for full brightness.
70%
Select this for medium brightness.
GENERAL SETUP PAGE
40%
DISC LOCK
Select this for dimming the display.
DISPLAY DIM
PROGRAM
2 Press 34to select a setting, then press
ENTER/OK to confirm your selection.
OSD LANGUAGE
SCREEN SAVER
SLEEP
DIVX(R) VOD CODE
Programming disc tracks (not for
Picture CD/MP3)
You can play the contents of the disc in the
order you want by programming the tracks
to be played. Up to 20 tracks can be
stored.
Locking/Unlocking the disc for
viewing
Not all discs are rated or coded by the disc
maker. You can prevent a specific disc
from playing by locking the disc. Up to 40
discs can be locked.
1 In ‘GENERAL SETUP PAGE’, press 34to
highlight {PROGRAM}, then press 2to
select {INPUT MENU}.
2 Press ENTER/OK to confirm.
1 In ‘GENERAL SETUP PAGE’, press 34to
highlight {DISC LOCK}, then press 2.
1
2
3
4
5
04
10
11
__
__
6
7
8
9
__
__
__
__
LOCK
Select this to block the playback of the
current disc. Subsequent access to a
locked disc requires six-digit password.
The default password is ‘000 000’ (see
page 25 “Changing the Password”).
10 __
UNLOCK
Select this to unlock the disc and allow
future playback.
2 Press 34to select a setting, then press
ENTER/OK to confirm your selection.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
To input your favorite tracks/chapter
OSD Language
3 Use the numeric keypad (0-9) to enter
This menu contains various language
options for display language on the screen.
For details, see page 8.
a valid track/chapter number.
4 Use 1234to move the cursor to the
next position.
➜ If the track number is more than ten,
press Tto open the next page and
proceed with programming or,
➜ Use 1234to highlight {NEXT} on the
program menu, then press ENTER/
OK.
Screen Saver
This function is used to turn the screen
saver on or off.
1 In ‘GENERAL SETUP PAGE’, press 34to
highlight {SCREEN SAVER}, then press 2.
ON
5 Repeat steps 3–4 to input another track/
Select this if you wish to turn off the TV
screen when disc playback is stopped or
paused for more than 15 minutes.
chapter number.
If you want to remove a track
6 Use 1234to move the cursor to the
OFF
track you want to remove.
Select this to disable the screen saver
function.
7 Press ENTER/OK to remove this track
from the program menu.
2 Press 34to select a setting, then press
ENTER/OK to confirm your selection.
To start program playback
8 Use 1234to highlight {START} on the
program menu, then press ENTER/OK.
➜ Playback will start with the selected
tracks under the programmed
sequence.
Sleep Timer
This feature automatically sets the DVD
player in standby mode after the amount of
time you have set.
1 In ‘GENERAL SETUP PAGE’, press 34to
highlight {SLEEP}, then press 2.
To exit program playback
9 Use 1234to highlight {EXIT} on the
program menu, then press ENTER/OK.
2 Press 34to select a setting.
➜ You can select from 15, 30, 45 and 60
minutes. Select {OFF} to cancel the
sleep timer function.
3 Press ENTER/OK to confirm your
selection.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
®
DivX VOD registration code
Audio Setup Menu
®
Yamaha provide you with the DivX VOD
(Video On Demand) registration code that
allows you to rent and purchase videos
1 Press SETUP.
2 Press 12to select ‘Audio Setup’ icon.
3 Press ENTER/OK to confirm.
®
using the DivX VOD service.
For more information, visit at
AUDIO SETUP PAGE
1 In ‘GENERAL SETUP PAGE’, press 34to
highlight {DIVX(R) VOD CODE}, then
press 2.
ANALOG OUTPUT
DIGITAL AUDIO
CD UPSAMPLING
NIGHT MODE
➜ The registration code will appear.
2 Press ENTER/OK to exit.
3 Use the registration code to purchase or
®
rent the videos from DivX VOD service
instructions and download the video onto
a CD-R for playback on this DVD player.
Setting the analog output
Helpful Hints:
– All the downloaded videos from DivX
Set Analog Output to match your DVD
Player’s playback capability.
®
VOD can only be played back on this DVD
player.
– Time search feature is not available during
DivX movie playback.
1 In ‘AUDIO SETUP PAGE’, press 34to
highlight {ANALOG OUTPUT}, then press
2.
STEREO
Select this to change channel output to
stereo which delivers sound from only the
two front speakers.
LT/RT
Select this if your DVD player is connected
to a Dolby Prologic decoder.
VIRTUAL SURROUND
Select this to reproduce the surround
channels virtually.
2 Press 34to select a setting, then press
ENTER/OK to confirm your selection.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
96K
Setting the Digital output
Playback a disc recorded at the sampling
rate of 96kHz. If the 96kHz disc is copy
protected, the digital output will be muted
to comply with the standards.
The options included in Digital Audio are:
‘Digital Output’ and ‘LPCM Output’.
1 In ‘AUDIO SETUP PAGE’, press 34to
highlight {DIGITAL AUDIO}, then press 2.
2 Press the 34to highlight an option.
3 Enter its submenu by pressing 2.
CD Upsampling
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you have activated
the upsampling, the player will
4 Move the cursor by pressing the 34to
highlight the selected item.
DIGITAL OUTPUT
Set the Digital output according to your
optional audio equipment connection.
automatically switch to stereo mode.
1 In ‘AUDIO SETUP PAGE’, press 34to
OFF
highlight {CD UPSAMPLING}, then press
Turn off the digital output.
2.
ALL
OFF
If you have connected your DIGITAL
AUDIO OUT to a multi-channel decoder/
receiver.
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of
the CDs twice higher than the original.
PCM ONLY
Only if your receiver is not capable of
decoding multi-channel audio.
176.4 kHz (X4)
Select this to convert the sampling rate of
the CDs four times higher than the
original.
LPCM OUTPUT
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc.,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
2 Press 34to select a setting, then press
ENTER/OK to confirm your selection.
Note:
– This setting is only applicable for the signals
output from the analog jacks.
48K
Playback a disc recorded at the sampling
rate of 48kHz. 96kHz (if available on disc)
PCM data stream will be converted to
48kHz.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Night Mode
Setting the TV Display
In this mode, the high volume outputs are
softened and low volume outputs are
brought upward to an audible level. It is
useful for watching your favorite action
movie without disturbing others at night.
Set the aspect ratio of the DVD Player
according to the TV you have connected.
The format you select must be available on
the disc. If it is not, the setting for TV
display will not affect the picture during
playback.
1 In ‘AUDIO SETUP PAGE’, press 34to
highlight {NIGHT MODE}, then press 2.
1 In ‘VIDEO SETUP PAGE’, press 34to
highlight {TV DISPLAY}, then press 2.
ON
2 Press 34to highlight one of the options
Select this to level out the volume. This
feature is only available for movies with
Dolby Digital mode.
below:
4:3 PAN SCAN
OFF
Select this if you have
a normal TV and want
both sides of the
Select this when you want to enjoy the
surround sound with its full dynamic range.
picturetobetrimmed
or formatted to fit
your TV screen.
2 Press 34to select a setting, then press
ENTER/OK to confirm your selection.
4:3 LETTER BOX
Video Setup Menu
Select this if you have a
normal TV. In this case, a
wide picture with black
bands on the upper and
lower portions of the TV screen will be
displayed.
1 Press SETUP.
2 Press 12to select ‘Video Setup’ icon.
3 Press ENTER/OK to confirm.
16:9
VIDEO SETUP PAGE
Select this if you have
a widescreen TV.
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
COMPONENT
3 Select an item and press ENTER/OK.
TV Type
This menu contains the options for
selecting the color system that matches
the connected TV. For details, see page 7.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Progressive
Picture Setting
This feature is only applicable if you have
connected this DVD Player to a
Progressive Scan TV through the Y Pb Pr
jacks (see page 6).
This DVD Player provides three
predefined sets of picture color settings
and one personal setting which you can
define yourself.
1 In ‘VIDEO SETUP PAGE’, press 34to
highlight {PROGRESSIVE}, then press 2.
1 In ‘VIDEO SETUP PAGE’, press 34to
highlight {PICTURE SETTING}, then press
2.
OFF
STANDARD
To disable Progressive Scan function.
Select this for standard picture setting.
ON
BRIGHT
To enable Progressive Scan function.
Select this will make the TV picture
brighter.
2 Press 34to select a setting, then press
ENTER/OK to confirm your selection.
SOFT
Notes on activating Progressive:
– Ensure that your TV has progressive
scan.
Select this will make the TV picture softer.
PERSONAL
Select this to personalize your picture
color by adjusting the brightness, contrast,
tint and color (saturation).
– Connect with YPbPr video cable.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE
“STANDARD DEFINITION” OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR VIDEO
MONITOR COMPATIBILITY WITH THIS
MODEL 525P AND 625P DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE
CENTER.
2 Press 34to select a setting, then press
ENTER/OK to confirm your selection.
3 If you select {PERSONAL}, then proceed
to steps 4–7.
➜ The ‘PERSONAL PICTURE SETUP’
menu appears.
PERSONAL PICTURE SETUP
BRIGHTNESS
CONTRAST
TINT
0
0
0
0
COLOR
This unit is compatible with the complete line of
YAMAHA products, including the projectors DPX-
1000, LPX-510 and the plasma monitor PDM-
4210E.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
4 Press 34to highlight one of the following
Switching the YUV/RGB
options.
This setting allows you to toggle the
output of the video signal between RGB
(on scart) and Y Pb Pr (YUV).
BRIGHTNESS
Increase the value will brighten the picture
or vice versa. Choose zero (0) for average
setting.
1 In ‘VIDEO SETUP PAGE’, press 34to
highlight {COMPONENT}, then press 2.
CONTRAST
YUV
Increase the value will sharpen the picture
or vice versa. Choose zero (0) to balance
the contrast.
Select this for Y Pb Pr connection.
RGB
Select this for Scart connection.
TINT
2 Press 34to select a setting, then press
ENTER/OK to confirm your selection.
Increase the value will darken the picture
or vice versa. Choose zero (0) for average
setting.
COLOR
Increase the value will enhance the color in
your picture or vice versa. Choose zero
(0) to balance the color.
5 Press 12to adjust the setting that best
suit your personal preference.
6 Repeat steps 4–5 for adjusting other color
features.
7 Press ENTER/OK to confirm.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
1 In ‘PREFERENCE PAGE’, press 34to
highlight {PARENTAL}, then press 2.
Preference Setup Menu
1 Press STOP 9twice to stop playback (if
any), then press SETUP.
PREFERENCE PAGE
2 Press 12to select the ‘Preference Setup’
AUDIO
1 KID SAFE
2 G
icon.
SUBTITLE
DISC MENU
PARENTAL
PBC
3 Press ENTER/OK to confirm.
3 PG
4 PG 13
5 PGR
6 R
MP3/JPEG NAV
PASSWORD
DEFAULT
7 NC 17
8 ADULT
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
2 Press 34to highlight a rating level for the
disc inserted and press ENTER/OK.
➜ To disable Parental controls and have all
Discs play, select {8 ADULT}.
MP3/JPEG NAV
PASSWORD
DEFAULT
3 Use the numeric keypad (0-9) to enter
the six-digit password (see page 25
“Changing the Password”).
Audio, Subtitle, Disc Menu
➜ DVDs that are rated above the level you
selected will not play unless you enter
your six-digit password.
These menus contain various language
options for audio, subtitle and disc menu
which may be recorded on the DVD. For
details, see page 9.
Helpful Hints:
– VCD, SVCD, CD have no level indication, so
parental control function has no effect on
these type of discs. This applies to most
illegal DVD discs.
– Some DVDs are not encoded with a rating
though the movie rating may be printed on
the Disc cover. The rating level feature does
not work for such Discs.
Restricting playback by Parental
Control
Some DVDs may have a parental level
assigned to the complete disc or to certain
scenes on the disc. This feature lets you set
a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit the
playing of certain discs that are not suitable
for your children or have certain discs
played with alternative scenes.
PBC (Playback Control)
You can set the PBC to ON or OFF. This
feature is available only on Video CD 2.0
with playback control (PBC) feature. For
details, see page 13.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
2 Press ENTER/OK to enter the ‘Password
MP3/JPEG Menu
Change Page’.
MP3/JPEG Navigator can be set only if the
disc is recorded with menu. It allows you
to select different display menus for easy
navigation.
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
1 In ‘PREFERENCE PAGE’, press 34to
highlight {MP3/JPEG NAV}, then press 2.
OK
WITHOUT MENU
Select this to display all the files contained
in the MP3/Picture CD.
3 Use the numeric keypad (0-9) to enter
your old six-digit password.
WITH MENU
Select this to display only the folder menu
of the MP3/Picture CD.
➜ When doing this for the first time, key
in ‘000 000’.
➜ If you forget your old six-digit
password, key in ‘000 000’.
2 Press 34to select a setting, then press
ENTER/OK to confirm your selection.
4 Enter the new six-digit password.
5 Enter the new six-digit password a second
time to confirm.
Changing the Password
The same password is used for both
Parental Control and Disc Lock. Enter
your six-digit password when prompted
on the screen. The default password is 000
000.
➜ The new six-digit password will now
take effect.
6 Press ENTER/OK to confirm.
Restoring to original settings
1 In ‘PREFERENCE PAGE’, press 34to
highlight {PASSWORD}, then press 2to
select {CHANGE}.
Setting the DEFAULT function will reset all
options and your personal settings to the
factory defaults, except your password for
Parental Control and Disc Lock.
1 In ‘PREFERENCE PAGE’, press 34to
highlight {DEFAULT}, then press 2to
select {RESET}.
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
2 Press ENTER/OK to confirm.
➜ All settings will now reset to factory
defaults.
MP3/JPEG NAV
PASSWORD
DEFAULT
CHANGE
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code
These pages can be used to select other languages.This does not affect the
options in “AUDIO”, “SUBTITLE” or “DISC MENU”.
Abkhazian
Afar
Afrikaans
Albanian
Amharic
6566
6565
6570
8381
6577
6582
7289
6583
6569
6589
6590
6665
6985
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
7889
7889
9072
9065
6785
6785
6786
7587
6779
7282
6783
6865
7876
6890
6978
6979
6984
7079
7074
7073
7082
7089
7168
7176
7565
German
Gikuyu; Kikuyu
Greek,
Guarani
Gujarati
Hausa
Hebrew
Herero
Hindi
6869
7573
6976
7178
7185
7265
7269
7290
7273
7279
7285
7383
7379
7368
7365
7369
7385
7375
7165
7384
7465
7486
7576
7578
7583
7575
7577
7573
8287
7589
7586
7579
7574
7585
7574
7679
7665
7686
7666
7673
7673
7673
7678
7684
7666
7775
7771
7783
7776
7784
7186
Arabic
Armenian
Assamese
Avestan
Aymara
Azerbaijani
Bashkir
Basque
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosnian
Breton
Bulgarian
Burmese
Castilian, Spanish
Catalan
Chamorro
Chechen
Chewa; Chichewa; Nyanja
Chichewa; Chewa; Nyanja
Chinese
Chuang; Zhuang
Church Slavic; Slavonic;
Church Slavonic; Church
Chuvash
Cornish
Corsican
Croatian
Czech
Danish
Dutch
Dzongkha
English
Esperanto
Estonian
Faroese
Fijian
Finnish
French
Frisian
Gaelic; Scottish Gaelic
Gallegan
Hiri Motu
Hungarian
Icelandic
Ido
Indonesian
Interlingua (International)
Interlingue
Inuktitut
Inupiaq
Irish
Italian
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Khmer
Kikuyu; Gikuyu
Kinyarwanda
Kirghiz
Komi
Korean
Kuanyama; Kwanyama
Kurdish
Kwanyama; Kuanyama
Lao
Latin
Latvian
Letzeburgesch;
Limburgan; Limburger;
Limburger; Limburgan;
Limburgish; Limburger;
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Malay
Malayalam
Maltese
Manx
Georgian
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code
These pages can be used to select other languages.This does not affect the options in
“AUDIO”, “SUBTITLE” or “DISC MENU”.
Maori
Marathi
7773
7782
7772
7779
7778
7865
7886
7886
7868
7882
7871
7869
8369
7868
7879
Sotho, Southem
South Ndebele
Spanish; Castilian
Sundanese
Swahili
8384
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
Marshallese
Moldavian
Mongolian
Nauru
Navaho, Navajo
Navajo; Navaho
Ndebele, North
Ndebele, South
Ndonga
Swati
Swedish
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Turkish
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Walloon
Welsh
Nepali
Northern Sami
North Ndebele
Norwegian
Norwegian Bokmål; Bokmål, 7866
Norwegian Nynorsk;
Nyanja; Chichewa; Chewa
Nynorsk, Norwegian;
Occitan (post 1500); Proven
7878
7889
7878
7967
Old Bulgarian; Old Slavonic; 6785
Old Church Slavonic; Old
Old Slavonic; Church
Oriya
6785
6785
7982
7977
7983
7983
8073
8065
7065
8076
8084
7967
8083
8185
8277
8279
8278
8285
8377
8371
8365
8367
7168
8382
8378
8368
8373
8375
8376
8379
Oromo
Ossetian; Ossetic
Ossetic; Ossetian
Pali
Panjabi
Persian
Polish
Wolof
Xhosa
Yiddish
Yoruba
Zhuang; Chuang
Zulu
Portuguese
Provençal; Occitan (post)
Pushto
Quechua
Raeto-Romance
Romanian
Rundi
Russian
Samoan
Sango
Sanskrit
Sardinian
Scottish Gaelic; Gaelic
Serbian
Shona
Sindhi
Sinhalese
Slovak
Slovenian
Somali
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the chart below when this unit does not function properly. If the
problem you are experiencing is not listed below or if the instruction below does
not help, set this unit to the standby mode, disconnect the power cord, and
contact the nearest authorized YAMAHA dealer or service center.
Problem
Solution
No power
No picture
– Check if the AC power cord is properly connected.
– Press the STANDBY/ON on the front of the DVD system
to turn on the power.
– Refer to your TV’s manual for correct Video In channel
selection. Change the TV channel until you see the DVD
screen.
– Check if the TV is switched on.
Distorted picture
– Sometimes a small amount of picture distortion may appear
depending on the disc being played back. This is not a
malfunction.
Completely distorted picture
or black/white picture with
DVD
– Make sure the disc is compatible with the DVD Player.
– Ensure that the DVD Player’s TV Type is set to match that
of the Disc and your TV.
No sound or distorted sound
– Adjust the volume.
– Check that the speakers are connected correctly.
No audio at digital output
– Check the digital connections.
– Check if your receiver can decode MPEG-2 or DTS and if
not, please make sure the digital output is set to
PCM ONLY.
– Check if the audio format of the selected audio language
matches your receiver capabilities.
No sound and picture
Disc can’t be played
– Check that the RGB/SCART cable is connected to the
correct device (See “Video Connections”).
– The DVD+R/RW, DVD-R/RW, CD-R/RW must be
finalized.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– If you have recorded a Picture CD or MP3 CD yourself,
ensure that your disc contains at least 10 pictures or 5 MP3
tracks.
– Region code incorrect.
Picture freezes momentarily
during playback
– Check the disc for fingerprints/scratches and clean with a
soft cloth wiping from centre to edge.
The player does not respond to
the Remote Control
– Aim the Remote Control directly at the sensor on the front
of the player.
– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/– signs) as
indicated.
Buttons do not work
– To completely reset the player, unplug the AC cord from
the AC outlet for 5-10 seconds.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
Player does not respond to
some operating commands
during playback.
– Operations may not be permitted by the disc. Refer to the
instructions of the disc jacket.
DVD Player cannot read CDs/
DVDs
– Use a commonly available cleaning CD/DVD to clean the
lens before sending the DVD Player for repair.
Menu items cannot be selected
– Press STOP twice before selecting System Menu.
– Depending on the disc availability, some menu items cannot
be selected.
Unable to play DivX movies
– Check that the DivX file is encoded in ‘Home Theater’
mode with DivX 5.x encoder.
Unable to select Progressive
Scan on/off
– Check that the output of the video signal is switch to ‘YUV’.
No sound during DivX movies
playback
– The audio code may not be supported by the DVD player.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Analog: Sound that has not been turned into num-
bers.Analog sound varies, while digital sound has
specific numerical values.These jacks send audio
through two channels, the left and right.
MP3: A file format with a sound data compression
system.“MP3” is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. By
using MP3 format, one CD-R or CD-RW can con-
tain about 10 times as much data volume as a regu-
lar CD can.
Aspect ratio: The ratio of vertical and horizontal
sizes of a displayed image.The horizontal vs. vertical
ratio of conventionalTVs. is 4:3, and that of wide-
screens is 16:9.
Parental Control: A function of the DVD to limit
playback of the disc by the age of the users accord-
ing to the limitation level in each country.The limita-
tion varies from disc to disc; when it is activated,
playback will be prohibited if the software’s level is
higher than the user-set level.
AUDIO OUT Jacks: Jacks on the back of the
DVD System that send audio to another system (TV,
Stereo, etc.).
Bit Rate:The amount of data used to hold a given
length of music;measured in kilobits per seconds,or
kbps. Or, the speed at which you record. Generally,
the higher the bit rate, or the higher the recording
speed, the better the sound quality. However, higher
bit rates use more space on a Disc.
PCM (Pulse Code Modulation): A system for
converting analog sound signal to digital signal for
later processing, with no data compression used in
conversion.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for controlling
reproduction. By using menu screens recorded on a
Video CD or SVCD that supports PBC, you can
enjoy interactive-type software as well as software
having a search function.
Chapter: Sections of a picture or a music piece on
a DVD that are smaller than titles.A title is com-
posed of several chapters. Each chapter is assigned a
chapter number enabling you to locate the chapter
you want.
Progressive Scan: It displays all the horizontal
lines of a picture at one time, as a signal frame.This
system can convert the interlaced video from DVD
into progressive format for connection to a progres-
sive display. It dramatically increases the vertical res-
olution.
ComponentVideo Out Jacks: Jacks on the back
of the DVD System that send high-quality video to a
TV that has ComponentVideo In jacks (R/G/B,Y/Pb/
Pr, etc.).
Disc menu: A screen display prepared for allowing
selection of images, sounds, subtitles, multi-angles,
etc. recorded on a DVD.
Region code: A system for allowing discs to be
played back only in the region designated before-
hand.This unit will only play discs that have compat-
ible region codes.You can find the region code of
your unit by looking on the product label. Some
discs are compatible with more than one region (or
ALL regions).
Digital: Sound that has been converted into
numerical values.Digital sound is available when you
use the DIGITAL AUDIO OUT COAXIAL or OPTI-
CAL jacks.These jacks send audio through multiple
channels, instead of just two channels as analog
does.
S-Video: Produces a clear picture by sending sepa-
rate signals for the luminance and the color.You can
use S-Video only if yourTV has S- video In jack.
DivX 3.11/4x/5x:The DivX code is a patent pend-
ing, MPEG-4 based video compression technology,
developed by DivXNetworks, Inc., that can shrink
digital video to sizes small enough to be transported
over the internet, while maintaining high visual qual-
ity.
Surround: A system for creating realistic three
dimensional sound fields full of realism by arranging
multiple speakers around the listener.
Title:The longest section of a picture or music fea-
ture on DVD, music, etc., in video software, or the
entire album in audio software. Each title is assigned
a title number enabling you to locate the title you
want.
Dolby Digital: A surround sound system devel-
oped by Dolby Laboratories containing up to six
channels of digital audio (front left and right, sur-
round left and right, center and subwoofer).
DTS: DigitalTheatre Systems.This is a surround
sound system, but it is different from Dolby Digital.
The formats were developed by different companies.
VIDEO OUT jack: Jack on the back of the DVD
System that sends video to aTV.
JPEG: A very common digital still picture format.A
still-picture data compression system proposed by
the Joint Photographic Expert Group, which fea-
tures small decrease in image quality in spite of its
high compression ratio.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
PLAYBACK SYSTEM
AUDIO PERFORMANCE
DVD Video
DA Converter
Signal-Noise (1 kHz)
Dynamic range (1 kHz)
DVD
24bit
Video CD & SVCD
CD
105dB
100dB
PICTURE CD
CD-R, CD-RW
DVD+R, DVD+RW
DVD-R, DVD-RW
fs 96 kHz
2Hz- 44kHz
2Hz- 22kHz
2Hz- 22kHz
2Hz- 20kHz
2Hz- 20kHz
0.003%
fs 48 kHz
fs 48 kHz
fs 44.1kHz
fs 44.1kHz
SVCD
CD/VCD
Distortion and Noise (1 kHz)
VIDEO PERFORMANCE
Video (CVBS) Output
S-Video output
1 Vpp into 75 ohm
TV STANDARD (PAL/50Hz) (NTSC/60Hz)
Y: 1 Vpp into 75 ohm
C: 0.3 Vpp into 75 ohm
0.7 Vpp into 75 ohm
Y: 1 Vpp into 75 ohm
Pb/Cb Pr/Cr: 0.7 Vpp into
75 ohm
Number of lines
Playback
625
525
RGB (SCART) output
Multistandard
(PAL/NTSC)
Component video output
CONNECTIONS
SCART
Euroconnector
Cinch (green)
Cinch (blue)
Cinch (red)
Mini DIN, 4 pins
Cinch
Y Output
AUDIO FORMAT
Pb/Cb Output
Pr/Cr Output
S-Video Output
Video Output
Digital Mpeg/ Dolby Digital/ Compressed Digital
DTS
PCM
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
24, 32, 56, 64, 96, 128,
256 kbps
Audio Output (L+R) Cinch
MP3(ISO 9660)
Digital Output
1 coaxial, 1 optical
IEC60958 for CDDA / LPCM/
MPEG1
fs, 16, 22.05, 24, 32,
44.1, 48 kHz
IEC61937 for MPEG 2, Dolby Digital
and DTS
WMA
32 kbps–192 kbps, mono,
stereo
Analog Sound Stereo
CABINET
Dimensions (w x d x h)
Weight
435 x 310 x 51 mm
Approx. 2.6 Kg
LASER
Type
Semiconductor laser GaAlAs
650 nm (DVD)
Wave length
POWER SUPPLY
780 nm (VCD/CD)
7 mW (DVD)
Power inlet
230V, 50Hz
Approx. 14W
< 1W
Output Power
Power usage
10 mW (VCD/CD)
60 degree
Power usage standby
Beam divergence
Specifications subject to change without prior
notice
31
Download from Www.Somanuals.com. All Manuals Search And Download.
|