U
DVD PLAYER
LECTEUR DVD
DV-S6165
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC INFORMATION (for US customers)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications
not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices.
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential
environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio
frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference
will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning
the product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this
type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe
Ave. Buena Park, CA90620.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying
blaring or distortion - and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries
Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume
levels.
For Customer Use:
Read carefully the information located at the rear
panel of this unit and enter below the Serial No.
Retain this information for future reference.
Model No.
Serial No. __________________________
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
AVOID DIRECT EXPOSURE TO THE BEAM
INVISIBLE LASER RADIATION WHEN OPEN
DANGER:
DO NOT STARE INTO BEAM
INVISIBLE LASER RADIATION WHEN OPEN
CAUTION:
ii En
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: READ THIS BEFORE OPERATING THIS UNIT.
1
2
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
Install this unit in a well ventilated, cool, dry, clean
place — away from direct sunlight, heat sources,
vibration, dust, moisture, or cold. In a cabinet, allow
about 2.5 cm (1 inch) of free space all around this
unit for adequate ventilation.
15 Be sure to read the “Troubleshooting” section on
common operating errors before concluding that
this unit is faulty.
16 Before moving this unit, press STANDBY/ON to
set the unit in standby mode, then disconnect the
AC power plug from the wall outlet.
17 Install this unit near the AC outlet and where the AC
power plug can be reached easily.
3
4
Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
Do not expose this unit to sudden temperature
changes from cold to hot, nor locate this unit in an
environment with high humidity (i.e., a room with a
humidifier) to prevent condensation inside this unit,
which may cause an electrical shock, fire, damage
to this unit, and/or personal injury.
18 The batteries shall not be exposed to excessive heat
such as sunshine, fire or the like.
The unit is not disconnected from the AC power
source as long as it is connected to the wall outlet,
even if this unit itself is turned off. This state is called
the standby mode. In this state, this unit is designed
to consume a very small quantity of power.
5
Avoid installing this unit in a location where foreign
objects may fall onto this unit or where this unit
may be exposed to liquid dripping or splashing. On
the top of this unit, do not place:
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug
to wide slot and fully insert.
This Class B digital apparatus complies with
Canadian ICES-003.
–
–
–
Other components, as they may cause damage and/or
discoloration on the surface of this unit.
Burning objects (i.e., candles), as they may cause
fire, damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall,
spilling the liquid and causing an electrical shock to
the user and/or damage to this unit.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
6
Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If
the temperature inside this unit rises, it may cause
fire, damage to this unit, and/or personal injury.
Do not plug in this unit to a wall outlet until all
connections are complete.
LASER SAFETY
7
8
9
This unit employs a laser. Due to possible eye injury,
only a qualified service person should remove the cover
or attempt to service this device.
Do not operate this unit upside-down. It may
overheat, possibly causing damage.
Do not use excessive force on switches, knobs and/
or cords.
DANGER
10 When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
12 Use only the voltage specified on this unit. Using
this unit with a higher voltage than specified is
dangerous and may cause fire, damage to this unit,
and/or personal injury. Yamaha will not be held
responsible for any damage resulting from use of
this unit with a voltage other than as specified.
13 Do not attempt to modify or fix this unit. Contact
qualified Yamaha service personnel when any
service is needed. The cabinet should never be
opened for any reason.
This unit emits visible laser radiation when open. Avoid
direct eye exposure to beam.
When this unit is plugged into a wall outlet, do not
place your eyes close to the opening of the disc tray and
other openings or look inside.
14 When not planning to use this unit for long periods
of time (i.e., vacation), disconnect the AC power
plug from the wall outlet.
iii En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Operations for video playback
(DVD/VCD/SVCD)..................................... 18
Resuming playback from the last stopped point
...........................................................................18
Selecting an audio language/format and subtitle
language ............................................................20
Playing MP3 music and JPEG pictures
SCART terminal <D>
(Europe and Russia models only)......................10
simultaneously ..................................................22
Step 1: Inserting batteries into the remote
control ......................................................13
Step 3: Setting a TV type/display and
language...................................................14
Setting the audio, subtitle, and disc menu
languages (DVD-Video only) ...........................16
Continued
1 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
...........................................................................31
Switching YUV/RGB
Europe model
Information for Users on Collection and
Disposal of Old Equipment and used Batteries
These symbols on the products, packaging,
and/or accompanying documents mean that
used electrical and electronic products and
batteries should not be mixed with general
household waste. For proper treatment,
recovery and recycling of old products and
used batteries, please take them to applicable
collection points, in accordance with your
national legislation and the Directives 2002/
96/EC and 2006/66/EC. This symbol mark is
according to the EU directive 2002/96/EC.
By disposing of these products and batteries
correctly, you will help to save valuable
resources and prevent any potential negative
effects on human health and the environment
which could otherwise arise from
inappropriate waste handling.
For more information about collection and
recycling of old products and batteries, please
contact your local municipality, your waste
disposal service or the point of sale where
you purchased the items.
(Europe and Russia models only)......................36
[Information on Disposal in other
Countries outside the European
Union]
These symbols are only valid in the European
Union. If you wish to discard these items,
please contact your local authorities or dealer
and ask for the correct method of disposal.
Note for the battery symbol (bottom
(except Korea model)........................................38
Selecting the PBC (playback control) function
...........................................................................39
two symbol examples):
This symbol might be used in combination
with a chemical symbol. In this case it
complies with the requirement set by the
Directive for the chemical involved.
2 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Introduction
About this manual
Region codes
Thank you for purchasing this unit. This
owner’s manual explains the basic operation
of this unit.
This unit is designed to support the region
management system. Check the regional code
number on the DVD disc package. If the
• Illustrations in this manual are based on the number does not match the region code of this
Europe model unless otherwise specified.
• Notes contain important information about
safety and operating instructions.
unit (see the table below or the back of this
unit), this unit may be unable to play the disc.
• yindicates a tip for your operation.
• This manual is printed prior to production.
Design and specifications are subject to
change in part as a result of improvements,
etc. In case of differences between the
manual and the product, the product has
priority.
Region
code of
this unit
Playable
discs
Destination
U.S.A.,
Canada
ALL
1
2
3
4
5
1
2
3
4
5
Europe
ALL
ALL
ALL
ALL
Supplied accessories
Asia,
Korea
For Europe and Russia models
• Remote control
• Two batteries (AAA, R03, UM-4) for the
remote control
• RCA stereo cable
• Composite video cable
Australia,
Central and
South America
Russia
For U.S.A., Canada, Central and South
America, Australia, Asia, and Korea
models
• Remote control
• Two batteries (AAA, R03, UM-4) for the
remote control
• Audio/video cable
3 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Notes
CD-R/RW, DVD-R/RW/R DL, and DVD+R/RW
R DL cannot be played unless finalized.
Progressive JPEG, copyright-protected WMA
and WMV files cannot be played with this unit.
This unit is not compatible with WMV Advanced
profile.
Only the first session of DVD-R/RW/R DL and
DVD+R/R DL can be played.
Discs without logos shown left are not guaranteed
to function.
Some discs cannot be played depending on disc
characteristics or recording conditions even if
they have the logos shown left.
Playable disc formats
•
•
•
•
•
•
/
This unit is designed for use with discs having
the logos shown below. Do not attempt to load
any other type of disc into this unit.
This unit can play:
•
•
Do not use any non-standard shaped discs
(heart-shaped, etc.).
Do not use discs with tape, seals, paste or many
scratches on their surface.
• DVD-R/RW/R DL and DVD+R/RW/R DL
discs recorded in DVD-Video compatible
format
• DVD-R/RW discs recorded in VR format
(compatible with CPRM)
• MP3, WMA, WMV, and JPEG files
recorded on CD-R/RW, DVD-R/RW,
DVD+R/RW, and USB device
y
For details about playable formats, see
• KODAK picture CDs, FUJICOLOR CDs
• ISO 9660 Level1/Level2 for CD-R/RW
Cleaning discs
•
Up to 298 folders per disc/USB device and up
to 648 files per folder with up to 8 hierarchies
®
• When a disc becomes dirty, clean it with a
cleaning cloth. Wipe the disc from the center
out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or
• DivX files recorded on CD-R/RW,
DVD-R/RW, DVD+R/RW, and USB device
– Official DivX® Ultra Certified product
– Plays all versions of DivX® video (including
DivX® 6) with enhanced playback of DivX®
media files and the DivX Media Format
antistatic spray intended for analog records.
4 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Patent information
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license under U.S. Patent No’s : 5,451,942 and other U.S. and worldwide patents issued
and pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are
trademarks of DTS, Inc. Copyright 1996-2007 DTS, Inc. All Rights Reserved.
DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
This product incorporates copyright protection technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is prohibited.
5 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Functional Overview
Front panel
1
2
3 4 5
6
7 8 9 0
q
1 STANDBY/ON
6 Front panel display
Turns on this unit or sets it to the standby mode
(see page 13). In the standby mode, this unit
consumes a small amount of power in order to
receive infrared signals from the remote control.
Shows the current status of this unit.
7 Remote control sensor
Receives infrared signals from the remote
2 Disc tray
8 PLAY ( p)
Starts playback.
3 OPEN/CLOSE (
)
9 PAUSE (
)
Pauses playback.
4 HDMI indicator
Frame-by-frame playback (see page 17).
Lights up when an HDMI component is
connected and signals output via the HDMI jack
of this unit.
0 STOP ( s )
Stops playback.
q USB port
5 PROGRESSIVE indicator
Lights up when this unit is in the progressive
Connect the USB connector of your USB device
6 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Rear panel
COMPONENT
VIDEO
PR/ CR
Y
MAINS
REMOTE CONTROL
OUT IN
HDMI
COAXIAL
DIGITAL OUT
PB/ CB
VIDEO OUT
S VIDEO
AV
AUDIO OUT
1
2
3
4
5
6 7 8
9
(Europe model)
1 AC power cable
5 DIGITAL OUT - COAXIAL jack
Connect to the coaxial input jack of your AV
Plug the power cable into the AC wall outlet.
2 REMOTE CONTROL (IN, OUT) jacks
Connect the REMOTE CONTROL (IN) jack of
this unit to the remote control output jack of
Connect the REMOTE CONTROL (OUT) jack
of this unit to the remote control input jack of
your Yamaha component.
6 VIDEO OUT - COMPONENT (Y, PB/CB, PR/
CR) jacks
Connect to the component input jacks of your
7 VIDEO OUT - S VIDEO jack
Connect to the S-video input jack of your AV
receiver (see page 10).
3 HDMI jack
Connect to the HDMI input jack of your HDMI
8 VIDEO OUT - VIDEO jack
Connect to the composite video input jack of
4 AUDIO OUT (L, R) jacks
Connect to the audio input jacks of your AV
9 AV terminal
(Europe and Russia models only)
Connect to the SCART input terminal of your
Caution: Do not touch the inner pins of the jacks on the rear panel of this unit.
Electrostatic discharge may cause permanent damage to this unit.
7 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Remote control
6
7
Stops playback (see page 17).
Opens the disc tray.*
7 Numeric buttons (0-9)
Selects numbered items in the currently
displayed menu.
1
2
0
8 SUBTITLE
22).
3
9 ZOOM
4
5
6
q
w
e
r
Enlarges or shrinks the video image (see
0 ON SCREEN
Accesses or exits from the on-screen display
7
t
y
u
q SET UP
8
9
Accesses or exits from the setup menu of this
w 33l
Searches forward (see page 17).*
1
e 3/8
Turns on this unit or sets it to the standby mode
(see page 13). In the standby mode, this unit
consumes a small amount of power in order to
receive infrared signals from the remote control.
r USB
Accesses the contents of the connected USB
device or exits from the USB mode (see
page 23).
2 TOP MENU/RETURN
Displays the top-level disc menu (DVD).
Moves back to the previous menu (DVD*/VCD)
t AUDIO
Selects the audio language or format (see
3 2 / 3/5/a
Selects an item in the currently displayed menu.
Search or slow playback (see page 27).
y REPEAT
Accesses or exits from the repeat/shuffle mode
ENTER
u REPEAT A-B
4 MENU
Displays the menu of a disc (DVD/JPEG) (see
* Press and hold the button for about two seconds.
5 l22
Moves to the previous chapter or track (see
page 17).
Searches backward (see page 17).*
8 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connections
Notes
General notes on connections
•
You need to set [DIGITAL OUTPUT] to [ALL]
Be sure to turn off this unit and unplug the
power cable before you make or change
connections.
• Depending on the component you want to
connect, there are various ways to make
connections. Possible connections are
described below.
• Refer to the manuals supplied with your
other components as necessary to make the
best connections.
• Do not connect this unit via your VCR. The
video quality could be distorted by the copy
protection system.
•
If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver produces a distorted sound or no sound
at all. Make sure to select the appropriate audio
format from the menu screen on the disc.
Pressing AUDIO on the remote control once or
more may change not only the audio languages
but also the audio format. The selected format
appears on the TV screen for several seconds.
If you want to enjoy Dolby Digital and DTS
formats, you must connect this unit to an AV
receiver that supports these formats.
•
• Do not connect the audio out jack of this unit
to the phono in jack of your audio system.
Analog connection
This unit has 2-ch analog output jacks.
Connect the AUDIO OUT (L, R) jacks of this
unit to the corresponding input jacks of your
audio component (such as a stereo amplifier)
using the supplied RCA stereo cable (Europe
and Russia models) or audio/video cable
(other models).
Audio connections
Digital connection
This unit has a digital coaxial output jack.
Connect the DIGITAL OUT - COAXIAL jack
of this unit to your AV receiver equipped with
a Dolby Digital or DTS decoder using a
commercially available coaxial digital audio
cable.
This unit (Europe model)
COMPONENT
VIDEO
PR/ CR
Y
COAXIAL
PB/ CB
S VIDEO
AV
AUDIO OUT
DIGITALOUT
VIDEO OUT
This unit (Europe model)
L
R
RCA stereo cable (Europe and Russia
models) or audio/video cable
(other models)
COMPONENT
VIDEO
PR/ CR
Y
(supplied)
L
R
COAXIAL
DIGITAL OUT
PB/ CB
VIDEO OUT
S VIDEO
AV
AUDIO OUT
Stereo
amplifier
C
C
Coaxial digital audio cable
AV receiver
L
R
Speakers
Speakers
9 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
commercially available component video
cable. Observe the color of each jack when
you make connections.
If your receiver does not have component
output jacks, you can achieve a better video
image by connecting the component output
jacks of this unit directly to the component
input jacks of your TV.
Video connections
Make video connections to your receiver and
TV so that you can use one TV for several
different video sources (LD, VCR, etc.) by
simply switching the input source selector of
your receiver.
This unit has several types of video output
jacks. Use the one that corresponds to the
input jacks of the component to be connected.
S-video jack <B>
S-video connections achieve a clearer picture
than composite video connections by
This unit (Europe model)
COMPONENT
VIDEO
PR/ CR
Y
transmitting video signals on separate wires
for luminance (Y) and chrominance (C).
Connect the VIDEO OUT - S VIDEO jack of
this unit to an S-video input jack of your AV
receiver and then to that of your TV using a
commercially available S-video cable.
COAXIAL
DIGITAL OUT
PB/ CB
VIDEO OUT
S VIDEO
AV
AUDIO OUT
S
PR
PB
Y
V
Composite video
cable (Europe and
Russia models)
or audio/video
cable
(other models)
(supplied)
Component
video cable
S-video
cable
Composite video jack <C>
Connect the VIDEO OUT - VIDEO jack of
this unit to a video input jack of your AV
receiver and then to that of your TV using the
supplied composite video cable (Europe and
Russia models) or audio/video cable (other
models).
V
<B>
<C>
<D>
<A> PR
PB
Y
S
PR/CR
P
B/CB
Y
COMPONENT
VIDEO IN
S VIDEO
INPUT
VIDEO
INPUT
SCART terminal <D>
(Europe and Russia models only)
AV receiver
SCART cable
You may connect the TV directly to this unit.
Connect the AV terminal of this unit to the
SCART input terminal of your TV using a
commercially available SCART cable.
The AV terminal outputs composite and RGB
video signals together with 2-ch audio signal.
Set the output of the video signal in
COMPONENT
S VIDEO
OUT
VIDEO
VIDEO OUT
OUT
COMPONENT
VIDEO IN
S VIDEO
IN
VIDEO
IN
TV
Component video jacks <A>
Component video connections achieve higher
fidelity color reproduction than S-video
connections by transmitting video signals on
separate wires for luminance (Y: green) and
chrominance (PB: blue, PR: red).
Connect the VIDEO OUT - COMPONENT
(Y, PB/CB, PR/CR) jacks of this unit to
component input jacks of your AV receiver
and then to those of your TV using a
10 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Notes
HDMI connection
•
You need to make appropriate audio connections
if the connected component does not output audio
This unit is not compatible with HDCP-
incompatible HDMI or DVI components.
You need a commercially available HDMI/DVI
conversion cable when you connect this unit to
other DVI components. In this case, the HDMI
jack of this unit does not output any audio
signals.
Depending on the connected DVI component,
black and white in the image may not be distinct.
In that case, adjust the picture setting of the
connected DVI component.
Do not disconnect or turn off the power of the
HDMI/DVI component connected to the HDMI
jack of this unit during playback. Doing so may
disrupt playback or cause noise.
HDMI jack
HDMI (High-Definition Multimedia
•
Interface) provides high quality digital audio
and video on a single connection.
Connect the HDMI jack of this unit to an
HDMI input jack of your AV receiver, and
then to that of your TV using a commercially
available HDMI cable.
If your receiver does not have an HDMI input
jack, you can achieve a better video image by
connecting the HDMI jack of this unit directly
to the HDMI input jack of your TV.
This unit can display High-Definition JPEG
images (720p, 1080i, or 1080p) when you
connect this unit to an HDTV via the HDMI
•
•
•
•
This unit (Europe model)
y
COMPONENT
VIDEO
PR/ CR
Y
HDMI
When connecting an HDMI component, refer to the
manual supplied with your component.
COAXIAL
PB/ CB
S VIDEO
AUDIO OUT
DIGITALOUT
VIDEO OUT
HDMI cable
HDMI IN
AV receiver
HDMI OUT
HDMI IN
TV
11 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Remote control jacks
Other connections
This unit has remote control input/output
jacks. If your AV receiver is a Yamaha product
and has the capability to transmit SCENE
control signals, you can use the SCENE
function.
Connect the REMOTE CONTROL (IN) jack
of this unit to a remote control output jack of
your receiver using a commercially available
monaural 3.5 mm mini plug cable so that this
unit starts playback automatically by simply
pressing a SCENE button of your receiver.
USB port
This unit has a USB port and can access MP3,
WMA, WMV, JPEG, and DivX files saved
on your USB device.
Connect a USB connector of your USB device
to the USB port on the front panel of this unit.
When your USB device is connected to the
USB port of this unit, you can record tracks on
a CD onto your USB device in MP3 format.
®
This unit
To disconnect the USB device, press
7
to
MAINS
REMOTE CONTROL
OUT IN
HDMI
stop playback, press USB to return to the disc
mode, and then disconnect the device from
this unit.
This unit
Monaural 3.5 mm mini plug
cable
REMOTE OUT
AV receiver
USB
device
y
•
For details about the SCENE function, refer to
the owner’s manual supplied with your Yamaha
AV receiver.
Note
•
You can connect a Yamaha component (such as
DVD player and CD player) corresponds with the
SCENE function to the REMOTE CONTROL
(OUT) jack of this unit.
This unit may not recognize some USB devices.
y
For details about the USB features, see “Using a
12 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Getting Started
Using the remote control
Step 1: Inserting batteries into
the remote control
Use the remote control within 6 m
(approximately 20 ft) of this unit and point it
toward the remote control sensor.
3
1
Within 6 m
(approximately 20 ft)
2
1 Open the battery compartment.
2 Insert the two supplied batteries (AAA,
R03, UM-4) following the indications (+/–)
inside the compartment.
Notes
•
Do not spill water or other liquids on the remote
control.
3 Close the cover.
•
•
Do not drop the remote control.
Do not leave or store the remote control in the
following types of conditions:
– places of high humidity, such as near a bath
– places of high temperature, such as near a
heater or stove
– places of extremely low temperature
– dusty places
When the remote control works unstably, point it
at an angle upward to the sensor.
Notes
•
Insert batteries correctly according to the polarity
markings (+/–). Batteries inserted in the opposite
orientation may leak.
•
•
•
Replace the exhausted batteries immediately with
new ones to prevent leakage.
Remove the batteries from the compartment if the
remote control is not used for more than a month.
If the batteries have leaked, dispose of them
immediately. Avoid touching the leaked material
or letting it come into contact with clothing, etc.
Clean the battery compartment thoroughly before
installing new batteries.
•
Step 2: Turning on the power
1 Plug the power cable into the AC outlet.
2 Turn on your TV and AV receiver.
•
•
Do not use old batteries together with new ones.
Do not use different types of batteries (such as
alkaline and manganese batteries) together. Read
the packaging carefully as these different types of
batteries may have the same shape and color.
Dispose of the batteries correctly in accordance
with your local regulations.
3 Select the appropriate input source of the
AV receiver (refer to the manual supplied
with your AV receiver).
•
4 Press STANDBY/ON on the front panel or
on the remote control to turn on this
unit.
➜ The front panel display lights up.
5 Set the TV to the correct video input (refer
to the manual supplied with your TV).
➜ The default screen appears on the TV.
13 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
PAL
Step 3: Setting a TV type/display
and language
Select this if the connected TV is a PAL
system TV. It will change the video signals of
NTSC discs and output them in PAL format.
You can customize this unit using the setup
menu displayed on the TV screen.
NTSC
Select this if the connected TV is an NTSC
system TV. It will change the video signals of
PAL discs and output them in NTSC format.
Note
Unless stated otherwise, all operations described
here are carried out using the supplied remote
control.
MULTI
Select this if the connected TV is compatible
with both NTSC and PAL formats (such as a
multi-system TV).
The output format will be in accordance with
the video signals of the disc.
y
•
•
To return to the previous menu, press 2.
If the setting you have selected are not
appropriate, you can reset all settings to the initial
factory settings (see “Resetting the system” on
page 40).
5 Select an item, and then press ENTER.
6 Press SET UP to exit from the menu.
Setting a color system for your TV
Notes
This unit is compatible with both NTSC and
PAL video formats. Select the color system
that matches your TV.
•
Before changing the current TV standard setting,
ensure that your TV supports the selected TV
type.
•
When making HDMI connections, you cannot
change or select [TV TYPE].
VIDEO SETUP PAGE
y
TV TYPE
PAL
If the picture is not displayed properly on your TV,
wait for 15 seconds for this unit to activate
automatic recovery.
TV DISPLAY
NTSC
MULTI
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
.......COMPONENT
*
HDMI SETUP
: [COMPONENT] is only for Europe and
Russia models.
*
1 Press SET UP.
2 Press 3 repeatedly to select “VIDEO
SETUP PAGE”.
3 Press 5/a to highlight [TV TYPE], and
then press 3.
4 Press 5/a to highlight one of the
following options.
14 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Setting an aspect ratio for your TV
Setting the OSD Language
You can set the aspect ratio of this unit to
match your TV. If the aspect ratio of your TV
You can select your own preferred language
for the setup menu. This setting remains once
is 16:9, you do not need to change this setting. selected.
For details, see “Setting the TV display” on
GENERAL SETUP PAGE
DISC LOCK
ENGLISH
DANSK
MP3 RECORD
PROGRAM
VIDEO SETUP PAGE
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
NEDERLANDS
NORSK
TV TYPE
DISPLAY DIM
OSD LANGUAGE
SCREEN SAVER
SLEEP
TV DISPLAY
4:3 PAN SCAN
4:3 LETTER BOX
16:9
*
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
DIVX(R) VOD CODE
.......COMPONENT
*
: The menu items may change depending on
the models.
*
HDMI SETUP
: [COMPONENT] is only for Europe and
Russia models.
*
1 Press SET UP.
2 Press 2 / 3 to select “GENERAL SETUP
1 Press SET UP.
PAGE”.
2 Press 3 repeatedly to select “VIDEO
3 Press 5/a to highlight [OSD
LANGUAGE], and then press 3.
4 Press 5/a to select a language, and then
press ENTER.
SETUP PAGE”.
3 Press 5/a to highlight [TV DISPLAY],
and then press 3.
4 Press 5/a to highlight the desired setting,
and then press ENTER.
5 Press SET UP to exit from the menu.
5 Press SET UP to exit from the menu.
15 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
■ To select a language not in the list
Setting the audio, subtitle, and disc
menu languages (DVD-Video only)
1 Select [OTHERS] in [AUDIO],
[SUBTITLE], or [DISC MENU], and then
press ENTER.
You can select your own preferred language
for the audio, subtitle, and disc menu. This
unit automatically switches to the selected
language whenever you load a disc. If the
selected language is not available on the disc,
the default language of the disc will be used
instead.
2 Use the numeric buttons (0-9) to enter
the 4-digit language code (see “Language
Codes” on page 41), and then press
ENTER.
3 Press SET UP to exit from the menu.
PREFERENCE PAGE
AUDIO
ENGLISH
CHINESE (SIMP)
FRENCH
SUBTITLE
DISC MENU
PARENTAL
VR LIST
SPANISH
RUSSIAN
POLISH
*
DATA DISC NAV
DIVX SUBTITLE
PBC
ITALIAN
TURKISH
: The menu items may change depending on
the models.
*
1 Press
7
twice to stop playback (if
necessary), and then press SET UP.
2 Press 3 repeatedly to select
“PREFERENCE PAGE”.
3 Press 5/a to highlight one of the options
below, and then press 3.
•
•
•
AUDIO (audio language)
SUBTITLE (subtitle language)
DISC MENU (disc menu language)
4 Press 5/a to select a language, and then
press ENTER.
settings.
6 Press SET UP to exit from the menu.
16 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Operation
Notes
Playback Operation
Selecting a track/chapter
1 Press l22 / 33l or use the numeric
buttons (0-9) to select a track/chapter
number.
•
If the prohibited icon ( ) appears on the TV
screen when a button is pressed, the function for
that button is not available on the current disc or
at the current time.
Depending on the disc, some operations may
operate differently or be restricted. Refer to the
instruction supplied with the disc.
Do not push on the disc tray or put any objects
other than discs on the disc tray. Doing so may
cause this unit to malfunction.
2 During repeated playback, press l22 /
33l to replay the same track/chapter.
•
•
Searching backward/forward
1 Press and hold l22 / 33l or press 2 / 3.
2 While searching, press l22 / 33l or
2 / 3 repeatedly to select the desired
speed.
Basic operation
3 To resume normal playback, press 3/8.
1 Make sure this unit is turned on.
2 Press OPEN/CLOSE ( ) on the front
Note
panel to open the disc tray.
The 2 / 3 key may not be available with some
3 Place the disc in the disc tray with the
discs.
printed side up.
y
4 Press OPEN/CLOSE ( ) again to close
the disc tray.
For MP3, WMA, WMV, and DivX®, the search
function allows you to search the track currently
being played.
➜ After recognizing the disc, this unit
starts playback automatically.
•
If you press 3/8 when the disc tray is
open, the disc tray closes and playback
starts automatically.
Repeat/Shuffle functions
Repeat/Shuffle playback
5 To pause playback, press 3/8 during
playback.
Each time you press REPEAT during
playback, the front panel display changes
as follows:
➜ Playback is paused and the sound is
muted.
•
Frame-by-frame playback can be done
by pressing PAUSE ( ) on the front
panel repeatedly.
DVD-Video
➜ RPT ONE (repeat chapter)
➜ RPT TT (repeat title)
➜ RPT ALL (repeat all)
➜ SHUFFLE (shuffle)
➜ RPT SHF (shuffle repeat)
➜ RPT OFF (repeat off)
6 To resume normal playback, press 3/8
again.
7 To stop playback, press
7.
DVD VR format
➜ RPT ONE (repeat chapter)
➜ RPT TT (repeat title)
➜ RPT ALL (repeat all)
➜ RPT OFF (repeat off)
17 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Operation
VCD/SVCD/CD
■ To select a playback feature or item
➜ RPT ONE (repeat track)
➜ RPT ALL (repeat all)
➜ SHUFFLE (shuffle)
➜ RPT SHF (shuffle repeat)
➜ RPT OFF (repeat off)
Use 2 / 3/5/a or the numeric
buttons (0-9), and then press ENTER to
start playback.
■ To access or exit from the menu
Press MENU.
MP3/WMA/WMV/DivX®
➜ RPT ONE (repeat file)
➜ RPT FLD (repeat folder)
➜ SHUFFLE (shuffle)
➜ RPT OFF (repeat off)
Playback in slow motion
You can play back video in slow motion.
1 During playback, press 5 for reverse slow
motion or a for forward slow motion.
Note
For VCD/SVCD, repeat playback is not available
when the PBC mode (see “Special VCD/SVCD
features” on page 20) is on.
2 During slow motion, press 5/a repeatedly
to select the desired speed.
3 To resume normal playback, press 3/8.
Repeating a section within a
chapter/track
Note
For VCD and SVCD, reverse slow motion is not
available.
1 While playing a disc, press REPEAT A-B
at the desired starting point.
➜ “SET A” appears in the front panel
display.
Zooming pictures in/out
You can enlarge or shrink the picture on the
TV screen and pan through the enlarged
picture.
2 Press REPEAT A-B again at the desired
end point.
•
A and B can only be set within the same
chapter/track.
1 During playback, press ZOOM repeatedly
to display the picture at different scales.
➜ “RPT AB” appears in the front panel
display and the selected section repeats
continuously.
•
Use 2 / 3/5/a to pan through the
enlarged picture.
➜ Playback continues.
3 To exit from the sequence, press REPEAT
A-B.
2 Press ZOOM repeatedly to return to the
original size.
Operations for video playback
(DVD/VCD/SVCD)
Resuming playback from the last
stopped point
You can resume playback of the last ten discs,
even if the discs were ejected or this unit was
set to the standby mode.
Using the disc menu
Depending on the disc, a menu may appear on
the TV screen once you load the disc.
18 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Operation
1 Load one of the last ten discs.
➜ “LOADING” appears on the TV
screen.
2 Press 5/a to scroll the information, and
then press ENTER to access the selected
item.
3 Use the numeric buttons (0-9) to input
the number/time or press 5/a to make a
selection, and then press ENTER.
➜ Playback changes to the selected time/
title/chapter/track.
2 Press 3/8 while “LOADING” is
displayed on the TV screen.
➜ “RESUME PLAY” appears on the TV
screen and the disc is played back from
the last point.
■ Changing the Title/Chapter/Track
■ To cancel the resume mode
(DVD/VCD)
When playback is stopped, press
7
again.
1 Press 5/a to select [TITLE],
Note
[CHAPTER] (DVD), or [TRACK] (VCD).
For DVD VR format, resume playback is not
available.
2 Press ENTER.
3 Select a title, chapter, or track number
using the numeric buttons (0-9).
Using the on-screen display (OSD)
■ Time search (DVD/VCD)
The OSD menu shows disc playback
information (e.g., the title or chapter number,
elapsed playing time or audio/subtitle
language). A number of operations are
possible without interrupting disc playback.
1 Press 5/a to select [TT TIME] /
[CH TIME] (DVD) or [DISC TIME] /
[TRACK TIME] (VCD).
•
[TT TIME] refers to the total time of
the current title, and [CH TIME] refers
to the total time of the current chapter.
1 During playback, press ON SCREEN.
➜ A list of available disc information
appears on the TV screen.
2 Press ENTER.
DVD
3 Enter hours, minutes and seconds from left
to right using the numeric buttons (0-9)
(e.g. 0:34:27).
MENU
TITLE
02/14
02/14
5.1CH
ENG
CHAPTER
AUDIO
■ Changing the Audio/Subtitle/Angle
(DVD)
SUBTITLE
You can change [AUDIO], [SUBTITLE], or
[ANGLE] if these functions are available on
the disc you are playing.
BITRATE 16
TITLE ELAPSED 0:02:25
VCD/SVCD
1 Press 5/a to select [AUDIO],
MENU
[SUBTITLE], or [ANGLE].
TRACK
02/14
DISC TIME
TRACK TIME
REPEAT
0:49:17
0:03:43
OFF
2 Press ENTER.
BITRATE 16
TOTAL ELAPSED 0:02:25
19 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Operation
3 For Audio and Subtitle:
Selecting an audio language/
format and subtitle language
Press 5/a to highlight your selection, and
then press ENTER.
■ To select an audio language/format
For Angle:
Press AUDIO repeatedly to select an audio
language and/or format.
Select an angle using the numeric
buttons (0-9).
■ To select a subtitle language
■ Repeat/Time Display (DVD/VCD)
Press SUBTITLE repeatedly to select a
subtitle language.
1 Press 5/a to select [REPEAT] or [TIME
DISP.].
2 Press ENTER.
Special VCD/SVCD features
3 Press 5/a to highlight your selection, and
then press ENTER.
Using the playback control (PBC)
menu
■ Time display (CD)
Each time you press ON SCREEN, the
time display changes as follows:
For a VCD with a playback control (PBC)
feature (version 2.0 only)
TOTAL ELAPSED
SINGLE REMAIN
TOTAL REMAIN
1 Press MENU to toggle between “PBC ON”
and “PBC OFF”.
SINGLE ELAPSED
➜ If you select “PBC ON”, the disc menu
appears (if available) on the TV screen.
Note
2 Use the numeric buttons (0-9) to select
Depending on the disc, the OSD menu may not be
displayed even if you press ON SCREEN.
a playback option.
•
Press l22 / 33l to move to the
previous/next page (if available).
3 During playback, press TOP MENU/
RETURN to return to the menu screen.
Special DVD features
■ To skip the index menu and play
Playing by title
back a disc from the beginning
1 Press MENU.
Press MENU to turn off the PBC function.
➜ The disc title menu appears on the TV
screen.
2 Use 2 / 3/5/a or the numeric
buttons (0-9) to select a playback option.
3 Press ENTER.
20 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Operation
Selecting a folder and track/file
Playing data discs
®
1 Press 5/a to select a folder, and then
press ENTER to open the folder.
(MP3/WMA/WMV/JPEG/DivX )
1 Load a data disc.
2 Press 5/a to select a track/file.
3 Press ENTER.
•
The disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
➜ Playback starts from the selected file to
the end of the folder.
➜ The data disc menu appears on the TV
screen.
00:00 00:00
001/020
Special picture disc features
Favorite
1 Load a picture disc (JPEG, KODAK
Picture CD, or FUJICOLOR CD).
➜ For JPEG, the picture menu appears on
the TV screen.
MP3
Piano
Cello
MP3
MP3
MP3
Jazz
Live
➜ For KODAK Picture CD and
FUJICOLOR CD, the slideshow
begins.
■ For JPEG
2 Playback starts automatically. If not, press
3/8.
2 Press 3/8 to start the slideshow.
3 Press l22 / 33l to select another track/file
Using the preview function
in the current folder.
This function displays the content of the
current folder or the entire disc.
Notes
•
For JPEG, some files may not be displayed
correctly depending on the aspect ratio of the
image.
1 Press
7
during playback.
➜ 12 thumbnails appear on the TV screen.
•
It may not be possible to play certain MP3/
WMA/WMV/JPEG/DivX® discs due to the
configuration and characteristics of the discs or
the recording conditions.
•
•
HD JPEG images may not be displayed correctly
when the first image is displayed or the disc is
ejected. For details about HD JPEG, see “HD
Depending on the picture size, HD JPEG images
may appear smaller in size.
2 Press l22 / 33l to display the other
thumbnails on the previous/next page.
21 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Operation
3 Use 2 / 3/5/a to highlight one of the
3 During MP3 music playback, select a
JPEG picture file from the TV screen, and
then press ENTER.
thumbnails, and then press ENTER to start
playback.
OR
➜ The picture files are played back one
after another until the end of the folder.
Move the cursor to highlight
on the
bottom of the page and then press ENTER
to start playback from the first thumbnail
on the current page.
4 To quit simultaneous playback, press
MENU, and then press
7.
Notes
■ For JPEG
•
Some files cannot be played correctly depending
on disc characteristics or recording conditions.
This function is not available when [HD JPEG] is
4 Press MENU to return to the data disc
menu.
•
Zooming pictures in/out
1 During playback, press ZOOM repeatedly
®
Special DivX features
to display the picture at different scales.
2 Use 2 / 3/5/a to pan through the
®
®
For DivX files including DMF (DivX
Media Format) features only
enlarged picture.
Using the interactive menu
Playback with multi-angles
During playback, press 2 / 3/5/a to
rotate the picture on the TV screen.
1 Load a disc and then select a file.
➜ The interactive menu appears on the
TV screen.
2: rotates the picture counter-clockwise
3: rotates the picture clockwise
5: flips the picture vertically
2 Use 2 / 3/5/a to select a chapter.
3 Press ENTER or 3/8 to start playback of
a: flips the picture horizontally
the selected chapter.
Playing MP3 music and JPEG
pictures simultaneously
■ To access the interactive menu
During playback, press MENU.
1 Load a disc that contains both MP3 music
and JPEG picture data.
■ To return to the data disc menu
screen
➜ The disc menu appears on the TV
screen.
When the interactive menu is displayed,
press
7.
2 Select an MP3 music track.
Selecting an audio/subtitle language
■ To select an audio language
During playback, press AUDIO to switch
the audio language recorded on the
contents.
22 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Operation
■ To select a subtitle language
Notes
During playback, press SUBTITLE to
switch or turn on/off the subtitle language
recorded on the contents.
•
•
Some devices may not work properly.
If “Device not supported” appears on the TV
screen when you connect the USB device, follow
the procedure below.
y
– Set this unit to the standby mode, and then turn
it on again.
– Disconnect the device when this unit is in the
standby mode, then connect it again and turn
on this unit.
•
For information about external subtitle files, see
“Selecting DivX® external subtitle group (except
Korea model)” on page 38.
•
For external subtitle files, the following subtitle
format filename extensions are supported (note
that these files are not shown within the disc
menu): .srt, .sub, .ssa, .smi
– Connect the AC adapter if the adapter is
supplied with the device.
If “Device not supported” appears even after you
perform this procedure, the device is not usable
with this unit.
If “USB current protection active. Device not
supported” appears on the TV screen, the device
is not usable with this unit because the power
consumption of the device is too high.
This unit cannot read more than two card reader
slots at once, though it can recognize up to six
slots. The first slot has priority.
•
•
The filename of the movie file has to be repeated
at the beginning of the filename for the external
subtitle file.
For Korean model, Korean and English external
subtitle files are available.
•
Notes
•
•
•
•
•
•
Some external subtitle files may be displayed
incorrectly or not at all.
Some discs cannot be played depending on disc
characteristics or recording conditions.
The number of external subtitle files that can be
switched for the same movie file is limited to a
maximum of ten.
Do not connect devices other than USB mass
storage class devices: USB chargers, USB hubs,
PCs, etc.
This unit is not compatible with HDDs.
Playing data files
1 Connect your USB device to the USB port
of this unit (see “USB port” on page 12).
➜ “Press USB key to switch device”
appears on the TV screen.
Using a USB device
You can play back MP3, WMA, WMV, JPEG,
®
and DivX files saved on your supported USB
device.
2 Press USB.
•
The reading time may exceed 30 seconds
due to the number of files/folders.
The file menu appears on the TV screen.
Supported USB devices
This unit supports USB mass storage class
devices using FAT16 or FAT32 format. The
supported devices are flash memories, card
readers, and portable audio players.
➜
3
Follow the procedure in “Playing data discs
®
23 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Operation
■ To exit from the USB mode
Press
USB.
7
to stop playback, and then press
➜
This unit is set to the disc mode.
■ To disconnect the USB device
After exiting from the USB mode,
disconnect the USB device from this unit.
Notes
•
Yamaha and suppliers accepts no liability for the
loss of data saved on the USB devices connected
to this unit. As a precaution, it is recommended
that the files are made backup copies.
You cannot access the USB mode while
“LOADING” is displayed on the TV screen.
If you disconnect the USB device or open the disc
tray of this unit, the playback mode is
automatically switched to the disc mode.
This unit can display up to 648 files. However,
less than 648 files may be displayed if some files
are not playable with this unit.
•
•
•
•
•
If the USB device is partitioned, only the first
partition is displayed.
This unit can play back files of 4 GB in size or
less.
24 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Setup Menu
Menu overview
The bold items/parameters listed below are the default settings. The menu items, setting items,
and default settings may change depending on the models.
Setup page
Menu item
DISC LOCK
Setting Item/Submenu
LOCK, UNLOCK
Setting item/Parameter
Page
GENERAL
SETUP PAGE
MP3 RECORD
PROGRAM
(SETUP is displayed)
(INPUT MENU is displayed)
100%, 70%, 40%
DISPLAY DIM
OSD LANGUAGE
SCREEN SAVER
SLEEP
ON, OFF
30, 60, 90, 120, 150 MINS, OFF
®
DIVX(R) VOD CODE (DivX registration code is displayed)
AUDIO SETUP ANALOG OUTPUT
STEREO, LT/RT
DIGITAL OUTPUT
LPCM OUTPUT
ON, OFF
PAGE
DIGITAL AUDIO
OFF, ALL, PCM ONLY
48KHz, 96KHz
HDMI AUDIO
NIGHT MODE
ON, OFF
VIDEO SETUP TV TYPE
PAGE
PAL (Europe, Russia, Australia, and Asia
models), NTSC (U.S.A., Canada, Central
and South America, and Korea models)
,
MULTI
TV DISPLAY
4:3 PAN SCAN, 4:3 LETTER BOX, 16:9
OFF, ON
PROGRESSIVE
PICTURE SETTING
STANDARD, BRIGHT, SOFT
PERSONAL (BRIGHTNESS)
PERSONAL (CONTRAST)
PERSONAL (TINT)
–20 to +20 (0)
–16 to +16 (0)
–9 to +9 (0)
PERSONAL (COLOR)
ON, OFF
–9 to +9 (0)
BLACK LEVEL
CLOSED CAPTION
ON (U.S.A. and Canada models), OFF
(Other models)
COMPONENT
(Europe and Russia
models only)
YUV, RGB
HDMI SETUP
WIDE SCREEN FORMAT
HDMI VIDEO
SUPERWIDE, 4:3 PILLAR BOX,
OFF
480P, 576P, 720P, 1080I, 1080P,
AUTO
HD JPEG
ON, OFF
25 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Setup page
Menu item
Setting Item/Submenu
Setting item/Parameter
Page
PREFERENCE AUDIO
PAGE
ENGLISH (Europe, U.S.A., Canada,
Central and South America, Australia,
and Asia models), RUSSIAN (Russia
model), KOREAN (Korea model), etc.
SUBTITLE
OFF (Europe, U.S.A., Canada, Central
and South America, Australia, and Asia
models), RUSSIAN (Russia model)
,
KOREAN (Korea model), etc.
DISC MENU
PARENTAL
ENGLISH (Europe, U.S.A., Canada,
Central and South America, Australia,
and Asia models), RUSSIAN (Russia
model), KOREAN (Korea model), etc.
1 KID SAFE, 2 G, 3 PG, 4 PG 13,
5 PGR, 6 R, 7 NC17, 8 ADULT
VR LIST
ORIGINAL LIST, PLAY LIST
WITHOUT MENU, WITH MENU
GROUP1, GROUP2, GROUP3,
DATA DISC NAV
DIVX SUBTITLE
(except Korea model) GROUP4, GROUP5
PBC
ON, OFF
ON, OFF
CHANGE
RESET
AUTO STANDBY
PASSWORD
DEFAULT
■ OSD LANGUAGE setting items
Model
Europe
Setting item
ENGLISH, DANSK, DEUTSCH,
ESPAÑOL, FRANÇAIS, ITALIANO,
NEDERLANDS, NORSK, POLSKI,
PORTUGUÊS, PYCCKИЙ
,
SVENSKA, TÜRKÇE
Russia
ENGLISH, DANSK, DEUTSCH,
ESPAÑOL, FRANÇAIS, ITALIANO,
NEDERLANDS, NORSK, POLSKI,
PORTUGUÊS, PYCCKИЙ,
SVENSKA, TÜRKÇE
U.S.A., Canada
Australia
ENGLISH, FRANÇAIS, ESPAÑOL
ENGLISH, FRANÇAIS, ESPAÑOL
ENGLISH, ESPAÑOL, PORTUGUÊS
Central and
South America
Asia
ENGLISH,
Korea
,
ENGLISH
26 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
3 Press 5/a to highlight the desired menu
item.
Setup menu operation
➜ Menu items and setting items appear.
Setup is carried out on the TV, enabling you to
customize this unit to suit your own particular
requirements. Follow the procedures below to
start the setup menu operations.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
y
•
•
To return to the previous menu, press 2.
The OSDs shown in this section are the examples
of Europe model. The menu items, setting items,
and default setting may change depending on the
models.
PICTURE SETTING
BLACK LEVEL
STANDARD
BRIGHT
CLOSED CAPTION
.......COMPONENT
SOFT
PERSONAL
*
HDMI SETUP
•
•
If the settings you have selected are not
appropriate, you can reset all settings to the initial
factory settings (see “Resetting the system” on
page 40).
Refer to the following pages for details of the
menu that requires a particular operation.
: [COMPONENT] is only for Europe and
Russia models.
*
➜
If setting items do not appear, the selected
menu item has submenus. In this case,
1 Press SET UP.
➜ The setup page and menu items appear
4 Press 3.
5 Press 5/a to select the desired setting
item, and then press ENTER.
on your TV.
➜
If the parameter appears, press
adjust the setting, and then press
ENTER
2
/
3
to
GENERAL SETUP PAGE
DISC LOCK
.
MP3 RECORD
PROGRAM
DISPLAY DIM
OSD LANGUAGE
SCREEN SAVER
SLEEP
PERSONAL PICTURE SETUP
DIVX(R) VOD CODE
BRIGHTNESS
CONTRAST
TINT
0
0
0
0
2 Press 2 / 3 to select the desired setup
COLOR
page.
6 Press SET UP to exit from the menu.
27 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Notes
MP3 files created by this unit are restricted to
General setup menu
•
your private enjoyment only. Unauthorized use of
copyrighted recordings can be copyright
infringement.
GENERAL SETUP PAGE
•
Yamaha and suppliers accepts no liability for the
loss of data saved on the USB devices connected
to this unit. As a precaution, it is recommended
that the files are made backup copies.
Discs incompatible with CDDA standard are not
guaranteed to function.
DISC LOCK
MP3 RECORD
PROGRAM
DISPLAY DIM
OSD LANGUAGE
SCREEN SAVER
SLEEP
•
•
•
•
DIVX(R) VOD CODE
Copy protected music discs incompatible with
CDDA standard are not recordable.
Tracks protected by SCMS (Serial Copy
Management System) are not recordable.
If “USB current protection active. Device not
supported” appears on the TV screen, the device
is not usable with this unit because the power
consumption of the device is too high.
“Device not supported” or “USB current
protection active. Device not supported” appears
on the TV screen when you connect the USB
device, this unit does not support the USB device.
In this case, use a different USB device.
During recording, do not disconnect your USB
device or set this unit to the standby mode.
Locking/Unlocking the disc for
viewing
Not all discs are rated or coded by the
manufacturer of the disc. You can prevent
playback of a specific disc by locking the disc.
You can lock up to 40 discs on this unit.
•
•
• Select [DISC LOCK] in “GENERAL
SETUP PAGE”.
LOCK
Select this to lock playback of the current disc.
Subsequent access to a locked disc requires a
six-digit password.
The default password is “000 000” (see
y
About the USB devices supported by this unit, refer
1 Connect your USB device to the USB port
UNLOCK
of this unit (see “USB port” on page 12).
Select this to unlock the disc and allow future
playback.
Recording CD tracks onto your
USB device
You can record CD tracks onto your USB
device connected to this unit.
3 In “GENERAL SETUP PAGE”, press
5/a to highlight [MP3 RECORD], and
then press 3 to select [SETUP].
4 Press ENTER.
The tracks are recorded in MP3 format.
28 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
5 In “MP3 RECORD”, press 5/a to
highlight [SPEED], and then press ENTER
repeatedly to select the desired setting.
•
•
The tracks may be displayed on more
than one page in “TRACK”. In this
case, press 5/a to select
or
,
and then press ENTER to scroll
MP3 RECORD
through pages.
OPTION
TRACK
SPEED Normal
Track 01
03:34
06:42
03:42
03:09
02:50
00:34
05:15
You can also select or deselect all the
tracks by selecting [Select All] or
[Deselect All].
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Bitrate 128 kbps
SUMMARY
9 Press 2 to return to [SPEED].
10Press 5/a to highlight [Start], and then
press ENTER.
Selected
Total Time
Start
0
00:00
Exit
Select All Deselect All
•
To cancel the recording, highlight
[CANCEL], and then press ENTER.
Normal
Select this to record at normal speed.
Notes
Fast
Select this to record at about 2x speed.
•
Recording cannot be started in the following
conditions:
– the connected USB device is not supported
– no USB device is connected
y
When you select [Normal], you can enjoy playback
while the recording.
– when “USB current protection active. Device
not supported” is shown on the TV screen
During recording, do not press any keys other
than ENTER.
6 Press 5/a to highlight [Bitrate], and then
press ENTER repeatedly to select the
desired bit rate.
•
96 kbps, 128 kbps, 192 kbps, 256 kbps,
320 kbps
Select a bit rate for the music data.
11When the recording is completed, press
2 / 3/5/a to highlight [Exit] and then
press ENTER to exit from “MP3
RECORD” menu.
y
Generally, the higher the bit rate, the better the
sound quality. However, higher bit rates use more
space on a device.
y
The created file is named as “TRACKxxx”. In
“xxx”, numbers from 001 to 999 are inserted in
order.
7 Press 3.
8 Press 5/a to highlight the desired track in
“TRACK”, and then press ENTER. Repeat
this step as necessary to select the other
tracks.
➜ The number of selected tracks and total
time are shown in “SUMMARY”.
29 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
5 Repeat steps 3-4 to input another track/
Note
chapter number.
You cannot edit the files on your USB device
connected to this unit by using this unit (for
example, deleting or renaming the files).
■ To remove a track
6 Use 2 / 3/5/a to select the track you
want to remove.
Programming disc tracks
7 Press ENTER to remove this track from
(except MP3/WMA/WMV/JPEG/
the program menu.
®
DivX )
■ To start program playback
You can play back the contents of a disc in the
desired order by programming the tracks to be
played. You can store up to 20 tracks per disc
with a maximum of ten discs.
8 Use 2 / 3/5/a to highlight [START] on
the program menu, and then press ENTER.
➜ Playback starts for the selected tracks in
the programmed sequence.
1 In “GENERAL SETUP PAGE”, press
5/a to highlight [PROGRAM], and then
press 3 to select [INPUT MENU].
■ To exit from program playback
9 Use 2 / 3/5/a to highlight [EXIT] on
the program menu, and then press ENTER.
2 Press ENTER.
➜ The input menu appears on the TV
screen.
Dimming the front panel display
You can select different levels of brightness
for the front panel display.
PROGRAM: TRACK (01-17)
6
7
8
9
_ _
_ _
_ _
_ _
1
2
3
4
5
04
10
_ _
_ _
_ _
•
Select [DISPLAY DIM] in
“GENERAL SETUP PAGE”.
10 _ _
START
100%
EXIT
NEXT
Select this for full brightness.
70%
■ To input your favorite tracks/
Select this for medium brightness.
chapters
40%
3 Use the numeric buttons (0-9) to enter a
Select this for dimming display.
valid track/chapter number.
4 Use 2 / 3/5/a to move the cursor to the
OSD language
next position.
This menu contains various options for the on-
screen display (OSD) language. For details,
•
If the track/chapter number is more
than ten, press 33l to move to the next
page, and then proceed with
programming.
OR
•
Use 2 / 3/5/a to highlight [NEXT]
on the program menu, and then press
ENTER.
30 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
2 Press ENTER to exit.
Setting the screen saver
This function is used to turn on or off the
screen saver.
y
To purchase or rent the videos from DivX® VOD
code and download the video onto a CD-R for
playback on this unit.
• Select [SCREEN SAVER] in “GENERAL
SETUP PAGE”.
ON
Notes
Select this to turn off the TV screen when disc
playback is stopped or paused for more than
15 minutes.
•
All of the downloaded videos from DivX® VOD
can only be played back on this unit.
For DivX®, the time search feature is not
available.
•
OFF
Select this to disable the screen saver function.
Setting the sleep timer
This feature automatically sets this unit to the
standby mode after a certain elapsed period.
Audio setup menu
• Select [SLEEP] in “GENERAL SETUP
PAGE”.
AUDIO SETUP PAGE
ANALOG OUTPUT
DIGITAL AUDIO
HDMI AUDIO
30 MINS, 60 MINS, 90 MINS, 120 MINS,
150 MINS
NIGHT MODE
Select one of them to set the sleep timer
function.
OFF
Select this to cancel the sleep timer function.
y
Setting the analog output
Set the analog output to match the playback
capability of this unit.
The sleep timer setting can also be deactivated if this
unit is set to the standby mode.
®
Displaying the DivX VOD
registration code
Yamaha provides you with a DivX VOD
(Video On Demand) registration code that
allows you to rent and purchase videos using
the DivX VOD service.
For more information, visit
•
Select [ANALOG OUTPUT] in
“AUDIO SETUP PAGE”.
®
STEREO
Select this to change channel output to stereo,
which only delivers sound from the two front
speakers.
®
LT/RT
Select this if this unit is connected to a Dolby
Pro Logic decoder.
1 In “GENERAL SETUP PAGE”, press
5/a to highlight [DIVX(R) VOD CODE],
and then press 3.
➜ The registration code appears.
31 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
96KHz
Setting the digital output
Select this to play back discs recorded at the
sampling rate of 96 kHz. If the 96 kHz disc is
copy protected, the digital output is
automatically converted to the sampling rate of
48 kHz. 48 kHz PCM data streams are output at
48 kHz.
The [DIGITAL AUDIO] options are:
[DIGITAL OUTPUT] and [LPCM OUTPUT].
1 In “AUDIO SETUP PAGE”, press 5/a to
highlight [DIGITAL AUDIO], and then
press 3.
2 Press 5/a to highlight an option.
3 Press 3.
4 Press 5/a to select a setting, and then
press ENTER.
DIGITAL OUTPUT
Set the digital output according to your
optional audio component connections.
Turning the HDMI audio on/off
When you connect this unit to an HDMI
compatible component via the HDMI jack,
select to turn on or off the HDMI audio output.
OFF
Select this to turn off the digital output.
•
Select [HDMI AUDIO] in “AUDIO
SETUP PAGE”.
ALL
Select this if you have connected the digital
audio output jack to a multi-channel decoder/
receiver.
ON
Select this to turn on the HDMI audio output.
PCM ONLY
OFF
Select this only if your receiver is not capable
of decoding multi-channel audio signals.
Select this to turn off the HDMI audio output.
Notes
y
•
Even if “ALL” is selected, this unit converts
MPEG audio into 2 channel PCM and then
outputs to the connected component.
When “PCM ONLY“ is selected, DTS digital
signal is muted.
•
If you are not using the HDMI audio output, set
this to [OFF].
If the monitor/receiver connected to this unit
using HDMI does not support HDMI audio signal
input, set this to [OFF].
•
•
•
•
When audio signals are being output by HDMI-
compatible components, digital signals output at
the coaxial jack of this unit are muted.
When [DIGITAL OUTPUT] is set to [OFF] on
this unit, HDMI audio signal is not output even if
[HDMI AUDIO] is set to [ON] and an HDMI
connection is established between the monitor
and receiver.
When [DIGITAL OUTPUT] is set to [ALL] on
this unit, PCM signals are still output if the
monitor and receiver only support the PCM
format. However, the HDMI audio signal is
muted when audio format plays back the DTS
source.
LPCM OUTPUT
Select this if you have connected this unit to a
PCM-compatible receiver via a digital jack,
such as the coaxial jack. In this case, you may
need to adjust [LPCM OUTPUT].
Discs are recorded at a certain sampling rate.
The higher the sampling rate, the better the
sound quality.
•
48KHz
Select this to play back discs recorded at the
sampling rate of 48 kHz. All 96 kHz PCM data
streams (if available) are converted to the
sampling rate of 48 kHz.
32 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
y
TV type
This unit can output the following audio signals
using HDMI: 32/44.1/48 kHz, 2ch linear PCM
signals and bitstream signals (Dolby Digital and
DTS).
This menu contains the options for selecting
the color system that matches your TV. For
details, see “Setting a color system for your
Turning the night mode on/off
Setting the TV display
In the night mode, high volume output is
softened and low volume output is brought
upward to an audible level. It is useful when
you want to watch your favorite action movie
without disturbing others at night.
Set the aspect ratio of this unit to match your
TV. The format you select must be available
on the disc. Otherwise, the TV display setting
will not affect the picture during playback.
•
Select [NIGHT MODE] in “AUDIO
SETUP PAGE”.
•
Select [TV DISPLAY] in “VIDEO
SETUP PAGE”.
ON
4:3 PAN SCAN
Select this to level out the volume. This
feature is only available for movies with the
Dolby Digital mode.
Select this if the aspect ratio of your TV is 4:3
and you want both sides of the picture to be
trimmed or formatted to fit your TV screen.
When you select this setting, invalidate the
dynamic range compression (DRC) of the
connected component.
4:3 LETTER BOX
Select this if the aspect ratio of your TV is 4:3.
In this case, a wide picture with black bands
on the upper and lower portions of the TV
screen are displayed.
OFF
Select this when you want to enjoy the full
dynamic range of surround sound.
16:9
Select this if you have a widescreen TV.
■ The relationship between the setting
Video setup menu
of this unit and the TV display
When the aspect ratio of your TV is 4:3:
Playback
disc
TV display
Setting
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
16:9
1
*
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
4:3 PAN
SCAN
4:3
16:9
4:3
.......COMPONENT
*
HDMI SETUP
: [COMPONENT] is only for Europe and
Russia models.
*
4:3 LETTER
BOX
33 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Notes on activating progressive scan:
• Ensure that your TV is equipped with
progressive scan.
• Connect using a component video cable.
• When making HDMI connections, you
cannot select [PROGRESSIVE].
When the aspect ratio of your TV is 16:9
(widescreen):
Playback
disc
TV display
Setting
16:9
• (Europe and Russia models only) When
[COMPONENT] is set to [RGB] (see
16:9
4:3
2
*
[PROGRESSIVE].
• You can turn off the progressive scan
without using the setup mode if no picture is
displayed. See “No picture is displayed
when you do not use progressive scan
connections (using the component video
*1: If the disc is not assigned to playback in
panscan, it is played in letterbox.
*2: The side of the picture may be stretched
depending on the TV. In this case, check the
screen size and aspect ratio of your TV.
Turning the progressive scan
function on/off
This feature is only available if you have
connected this unit to a progressive scan TV
through the component video jacks (see
Adjusting picture settings
This unit comes with three predefined sets of
picture color settings and one personal setting
that you can define yourself.
1 In “VIDEO SETUP PAGE”, press 5/a to
highlight [PICTURE SETTING], and then
press 3.
•
Select [PROGRESSIVE] in “VIDEO
SETUP PAGE”.
OFF
STANDARD
Select this to disable the progressive scan
function.
Select this for the standard picture setting.
BRIGHT
ON
Select this to make the TV picture brighter.
Select this to enable the progressive scan
function.
SOFT
Select this to make the TV picture softer.
PERSONAL
Select this to personalize your picture color by
adjusting the brightness, contrast, tint and
color (saturation).
2 Press 5/a to select a setting, and then
press ENTER.
3 If you select [PERSONAL] in step 1,
proceed to steps 4-7.
34 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
➜ The “PERSONAL PICTURE SETUP”
Turning the black level on/off
menu appears.
When [TV TYPE] is set to [NTSC] (see
page 14), this menu is effective for improving
the visibility of the black color in the dark area
on the screen. The black level setting has no
effect if [TV TYPE] is set to [PAL].
PERSONAL PICTURE SETUP
BRIGHTNESS
CONTRAST
TINT
0
0
0
0
•
Select [BLACK LEVEL] in “VIDEO
SETUP PAGE”.
COLOR
ON
Select this to improve the visibility of the
black color.
4 Press 5/a to select one of the following
OFF
options.
Select this for the standard black level setting.
BRIGHTNESS
Adjust the brightness of the picture. Zero (0) is
the average brightness setting value.
Note
This function is only available for composite video /
S-video output.
CONTRAST
Adjust the contrast of the picture. Zero (0) is
the average contrast setting value.
Turning the closed caption on/off
TINT
Closed captions are data hidden in the video
signals of specific discs and are invisible
without the use of a special decoder. The
difference between subtitles and captions is
that subtitles are intended for hearing persons
and captions are for the hearing impaired.
Subtitles rarely show all of the audio. For
example, captions show sound effects (e.g.,
“phone ringing”, “footsteps”), while subtitles
do not.
Adjust the balance of red and green of the
picture. Zero (0) is the average tint setting
value.
COLOR
Adjust the color level of the picture. Zero (0) is
the average color setting value.
5 Press 2 / 3 to adjust the setting that best
suits your personal preference.
6 Repeat steps 4-5 to adjust other color
features.
Before you select this function, ensure that the
disc contains closed caption information and
your TV also supports this function.
7 Press ENTER.
•
Select [CLOSED CAPTION] in
“VIDEO SETUP PAGE”.
ON
Select this to enable the closed caption
function.
OFF
Select this to disable the closed caption
function.
35 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
SUPERWIDE
Note
Select to display a 4:3 image on the 16:9 screen
with non-linear stretching (center position of
screen is stretched less than the sides).
This function is only available for NTSC video
format and composite video / S-video output.
4:3 PILLAR BOX
Select to display a 4:3 image on the 16:9 screen
without stretching. When playing a disc
recorded in the 16:9 image, the image is
displayed in its original aspect ratio (16:9)
without pillar boxes.
Switching YUV/RGB
(Europe and Russia models only)
This setting allows you to toggle the output of
the video signal between YUV (on VIDEO
OUT - COMPONENT) and RGB (on
SCART).
OFF
No aspect ratio adjustment is made when this
option is selected.
•
Select [COMPONENT] in “VIDEO
SETUP PAGE”.
Note
YUV
When the video signal is 480p or 576p, you cannot
select [WIDE SCREEN FORMAT], and no aspect
ratio adjustment is made even if [SUPERWIDE] or
[4:3 PILLAR BOX] is selected.
Select this for the component video
connection.
RGB
Select this for SCART connection.
HDMI VIDEO
Set the resolution depending on the monitor
you are using. This unit is compatible with the
following video formats:
480p/60Hz, 576p/50Hz, 720p/50Hz, 60Hz,
1080i/50Hz, 60Hz, and 1080p/50Hz, 60Hz
Setting the HDMI video
When you connect this unit to an HDMI
compatible component via the HDMI jack,
select the following video output settings
depending on the connected component.
480P
1 In “VIDEO SETUP PAGE”, press 5/a to
highlight [HDMI SETUP], and then press
3.
480 progressive-scan video
576P
576 progressive-scan video
2 Press 5/a to highlight an option.
3 Press 3 to enter a submenu.
720P
720 progressive-scan video
1080I
1080 interlaced video
WIDE SCREEN FORMAT
Set the aspect ratio of the projected images on
the screen. This feature is only available when
making HDMI connections and [TV
playing back 4:3 image.
1080P
1080 progressive-scan video
AUTO
The resolution is automatically selected to
match the monitor you are using.
36 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Notes
Preference setup menu
•
For the settings other than [AUTO], images may
Press
7
twice to stop playback (if necessary)
not be displayed properly if a resolution output
setting is not supported by the HDMI component
you are using. In that case, follow the steps below
to return to [AUTO].
before pressing SET UP.
1 Press OPEN/CLOSE (
to open the disc tray.
2 Press 2.
) on the front panel
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
VR LIST
3 Press SUBTITLE.
•
•
You cannot set [TV TYPE], [PROGRESSIVE],
and [COMPONENT] (Europe and Russia
models) when making HDMI connections.
When disconnecting the HDMI cable, the setting
of [TV TYPE] may be changed. If the component
video, S-video, or composite video signal is not
output correctly, see “Completely distorted
picture, black/white picture, or no picture” in
“Troubleshooting” on page 43 to set the correct
TV type again.
DATA DISC NAV
.......DIVX SUBTITLE
*
PBC
: [DIVX SUBTITLE] is available for the
models other than Korea model.
*
Audio, subtitle and disc menu
These menus contain various language options
for the audio, subtitles, and disc menus
recorded on the DVD-Video. For details, see
HD JPEG
This unit can display High-Definition JPEG
images when connecting to an HDMI
component using HDMI cable.
ON
Displays JPEG pictures with high quality.
Restricting playback with parental
control
OFF
Displays JPEG pictures with standard quality.
Some DVDs may have a parental level
assigned to the complete disc or to certain
scenes on the disc. This feature lets you set a
playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit playback
of certain discs that are not suitable for your
children or play certain discs in alternative
scenes.
Notes
•
You can select [HD JPEG] when the HDMI video
signals with 720p, 1080i, and 1080p are output.
You cannot select [HDMI SETUP] when JPEG
(including HD JPEG) pictures are displayed.
•
37 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
ORIGINAL LIST
Select this to play the originally recorded titles
on the disc.
1 In “PREFERENCE PAGE”, press 5/a to
highlight [PARENTAL], and then press 3.
PLAY LIST
Select this to play the edited version of the
disc. This feature is only available when a play
list has been created.
PREFERENCE PAGE
AUDIO
1 KID SAFE
2 G
SUBTITLE
DISC MENU
PARENTAL
VR LIST
3 PG
4 PG 13
5 PGR
6 R
2 Press 5/a to highlight a setting, and then
press ENTER.
DATA DISC NAV
DIVX SUBTITLE
PBC
7 NC17
8 ADULT
.......
■ To play back a disc in VR format
3 Press SET UP to close the setup menu.
*
: [DIVX SUBTITLE] is available for the
models other than Korea model.
*
4 Press 3/8 to begin to play back the disc
with the setting you selected.
2 Press 5/a to highlight a rating level for
the inserted disc, and then press ENTER.
Selecting the data disc menu
Data disc navigator can be set only if the disc
was recorded with a menu. It allows you to
display folder menus when playing back a disc
with folder structure.
•
To disable parental controls and have
all discs play, select [8 ADULT].
3 Use the numeric buttons (0-9) to enter
the six-digit password (see “Changing the
•
Select [DATA DISC NAV] in
“PREFERENCE PAGE”.
➜ DVD discs that are rated above the
level you selected do not play unless
you enter your six-digit password.
WITHOUT MENU
Select this to display all the files contained in
the data disc.
Note
WITH MENU
Some DVD discs are not encoded with a rating
though the movie rating may be printed on the disc
cover. The rating level feature does not work for
such discs.
Select this to display only the folder menu of
the data disc.
®
Selecting DivX external subtitle
group (except Korea model)
Selecting playback of VR format
The font sets listed below are available for
There are two ways to play back a disc in VR
(Video Recording) format: ORIGINAL and
PLAY LIST.
®
DivX external subtitle files. This setting
allows you to see the proper font set on-screen
to match the subtitle file.
1 In “PREFERENCE PAGE”, press 5/a to
highlight [VR LIST], and then press 3.
•
Select [DIVX SUBTITLE] in
“PREFERENCE PAGE”.
38 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
GROUP1:
Selecting the PBC (playback
control) function
You can set playback control (PBC) to on or
off. This function is available only on Video
CD 2.0 with the playback control (PBC)
feature.
Albanian (sq), Basque (eu), Catalan (ca),
Danish (da), Dutch (nl), English (en),
Faroese (fo), Finnish (fi), French (fr),
German (de), Icelandic (is), Irish (ga),
Italian (it), Norwegian (no),
Portuguese (pt), Rhaeto-Romanic (rm),
Scottish (gd), Spanish (es), Swedish (sv)
•
Select [PBC] in “PREFERENCE
PAGE”.
GROUP2:
Albanian (sq), Croatian (hr), Czech (cs),
Hungarian (hu), Polish (pl), Romanian (ro),
Slovak (sk), Slovenian (sl)
ON
Select this to display a disc menu.
OFF
GROUP3:
Select this not to display a disc menu.
Playback starts from the beginning of a disc.
Bulgarian (bg), Byelorussian (be),
Macedonian (mk), Russian (ru), Serbian (sr),
Ukrainian (uk)
y
You can also use the MENU button on the remote
control to turn on or off the playback control (PBC)
function (see “Using the playback control (PBC)
GROUP4:
Hebrew (iw), Yiddish (ji)
GROUP5:
Turkish (tr)
Setting the auto standby function
You can set auto standby function to on or off.
Notes
•
•
•
Some external subtitle files may be displayed
incorrectly or not at all.
•
Select [AUTO STANDBY] in
“PREFERENCE PAGE”.
Some discs cannot be played depending on disc
characteristics or recording conditions.
The number of external subtitle files that can be
switched for the same movie file is limited to a
maximum of ten.
ON
Select this to set this unit to the standby mode
automatically when disc playback is stopped
or paused for more than 30 minutes.
y
•
OFF
For external subtitle files, the following subtitle
Select this to disable the auto standby
function.
format filename extensions are supported (note
that these files are not shown within the disc
menu): .srt, .sub, .ssa, .smi
•
The filename of the movie file has to be repeated
at the beginning of the filename for the external
subtitle file.
39 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
4 Enter the new six-digit password.
Changing the password
5 Enter the new six-digit password again to
The same password is used for both parental
control and disc lock. Enter your six-digit
password when prompted on the screen. The
default password is 000 000.
confirm the password.
6 Press ENTER to confirm your new
password.
➜ The new six-digit password is now
1 In “PREFERENCE PAGE”, press 5/a to
highlight [PASSWORD], and then press 3
to select [CHANGE].
valid.
Resetting the system
You can reset all options and your personal
settings to the initial factory settings,
excluding [PASSWORD], [PARENTAL], and
[DISC LOCK].
PREFERENCE PAGE
PARENTAL
VR LIST
DATA DISC NAV
.......DIVX SUBTITLE
1 In “PREFERENCE PAGE”, press 5/a to
highlight [DEFAULT], and then press 3
to select [RESET].
*
PBC
AUTO STANDBY
PASSWORD
DEFAULT
CHANGE
2 Press ENTER.
: [DIVX SUBTITLE] is available for the
models other than Korea model.
➜ All settings are reset to the initial
*
factory settings.
2 Press ENTER to enter the “Password
Change Page”.
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
OK
3 Use the numeric buttons (0-9) to enter
your old six-digit password.
•
When doing this for the first time, enter
“000 000”.
•
If you forget your old six-digit
password, enter “000 000”.
40 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Codes
Language Codes
These codes can be used to select other languages. This does not affect the options in
“AUDIO”, “SUBTITLE”, or “DISC MENU”.
Abkhazian
Afar
6566 Gaelic
6565 Gallegan
6570 Georgian
8381 German
6577 Gikuyu
6582 Greek
7168 Macedonian
7176 Malagasy
7565 Malay
7775 Sardinian
7771 Scottish Gaelic
7783 Serbian
7776 Shona
8367
7168
8382
8378
8368
8373
8375
8376
8379
8384
7882
6983
8385
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
Afrikaans
Albanian
Amharic
Arabic
6869 Malayalam
7573 Maltese
7784 Sindhi
6976 Manx
7186 Sinhalese
7773 Slovak
Armenian
Assamese
Avestan
Aymara
Azerbaijani
Bashkir
7289 Guarani
6583 Gujarati
6569 Hausa
7178 Maori
7185 Marathi
7782 Slovenian
7772 Somali
7779 Sotho, Southem
7778 South Ndebele
7865 Spanish
7886 Sundanese
7886 Swahili
7868 Swati
7265 Marshallese
7269 Moldavian
7290 Mongolian
7273 Nauru
6589 Hebrew
6590 Herero
6665 Hindi
Basque
6985 Hiri Motu
6669 Hungarian
6678 Icelandic
6672 Ido
7279 Navaho
Belarusian
Bengali
7285 Navajo
7383 Ndebele, North
7379 Ndebele, South
7368 Ndonga
Bihari
7882 Swedish
7871 Tagalog
7869 Tahitian
8369 Tajik
Bislama
Bokmål, Norwegian
Bosnian
Breton
6673 Indonesian
7866 Interlingua (International) 7365 Nepali
6683 Interlingue
6682 Inuktitut
6671 Inupiaq
7789 Irish
7369 Northern Sami
7385 North Ndebele
7375 Norwegian
7165 Norwegian Bokmål
7384 Norwegian Nynorsk
7465 Nyanja
7868 Tamil
Bulgarian
Burmese
Castilian
Catalan
7879 Tatar
7866 Telugu
7878 Thai
6983 Italian
6765 Japanese
6772 Javanese
6769 Kalaallisut
7889 Kannada
7889 Kashmiri
9072 Kazakh
9065 Khmer
7889 Tibetan
7878 Tigrinya
Chamorro
Chechen
Chewa
7486 Nynorsk, Norwegian
7576 Occitan (post 1500)
7578 Old Bulgarian
7583 Old Church Slavonic
7575 Old Slavonic
7577 Oriya
7967 Tonga (Tonga Islands) 8479
6785 Tsong
6785 Tswana
6785 Turkish
7982 Turkmen
7977 Twi
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9065
9085
Chichewa
Chinese
Chuang
Church Slavic
Church Slavonic
Chuvash
Cornish
6785 Kikuyu
7573 Oromo
6785 Kinyarwanda
6786 Kirghiz
7587 Komi
8287 Ossetian
7983 Uighur
7983 Ukrainian
8073 Urdu
8065 Uzbek
7065 Vietnamese
8076 Volapük
8084 Walloon
7967 Welsh
8083 Wolof
8185 Xhosa
8277 Yiddish
8279 Yoruba
8278 Zhuang
8285 Zulu
7589 Ossetic
7586 Pali
Corsican
Croatian
Czech
6779 Korean
7579 Panjabi
7282 Kuanyama
6783 Kurdish
6865 Kwanyama
7876 Lao
7574 Persian
7585 Polish
Danish
7574 Portuguese
7679 Provençal
7665 Pushto
Dutch
Dzongkha
English
6890 Latin
6978 Latvian
6979 Letzeburgesch
6984 Limburgan
7079 Limburger
7074 Limburgish
7073 Lingala
7082 Lithuanian
7089 Luxembourgish
7686 Quechua
Esperanto
Estonian
Faroese
7666 Raeto-Romance
7673 Romanian
7673 Rundi
Fijian
7673 Russian
Finnish
7678 Samoan
8377
French
7684 Sango
8371
Frisian
7666 Sanskrit
8365
41 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are
experiencing is not listed below or if the instruction below does not help, set this unit to the
standby mode, disconnect the power cable, and contact the nearest authorized Yamaha
dealer or service center.
Problem
Solution
Connect the AC power cable properly.
No power
Press STANDBY/ON on the front panel to turn on the power.
This unit cannot read CD or
DVD
Use a commonly available CD/DVD lens cleaner to clean the lens
before sending this unit for repair.
“NO DISC” appears in the front
panel display
Check that the disc is placed in the disc tray correctly.
“UN DISC” appears in the front
panel display
The disc being loaded is not supported by this unit. Check the disc type
Disc or file does not play
The CD-R/RW, DVD+R/RW/R DL, and DVD-R/RW/R DL must be
finalized.
Check that the disc label is facing up.
Check whether the disc is defective by trying another disc.
If you have recorded a JPEG, MP3, or WMA disc yourself, check that
your disc contains at least ten JPEG picture files or five MP3/WMA
music tracks.
For MP3/WMA, check that the sampling rate and bit rate are
compatible.
For JPEG, check that the resolution is compatible (see “Specifications”
For WMA/WMV, check that the file is not protected by DRM (Digital
Rights Management).
For WMV, check that the file has been encoded by WMV9.
For WMV, check that the file is not Advanced Profile.
For WMV, check that the resolution of the file is 720 x 480/720 x 576
pixels or less.
No picture
Refer to the manual supplied with your TV to select the video input
channel correctly. Change the TV channel until you see the DVD
screen.
Turn on your TV.
Check the video connection.
No picture is displayed when
you make HDMI connections
(using the HDMI jacks)
Follow the steps below to change the [HDMI VIDEO] to [AUTO].
1. Press OPEN/CLOSE (
) on the front panel or press and hold
7
on the remote control to open the disc tray.
2. Press 2 on the remote control.
3. Press SUBTITLE on the remote control.
42 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
Follow the steps below to turn off the progressive scan.
1. Press OPEN/CLOSE ( ) on the front panel or press and hold
on the remote control to open the disc tray.
2. Press 2 on the remote control.
3. Press ZOOM on the remote control to deactivate the progressive
No picture is displayed when
you do not use progressive
scan connections (using the
component video jacks)
7
scan.
Completely distorted picture,
black/white picture, or no
picture
Check that the disc is compatible with this unit (see “Playable disc
Check that the TV type of this unit is set to match that of the disc and
the steps below to change the setting of [TV TYPE].
1. Press OPEN/CLOSE (
) on the front panel or press and hold
7
on the remote control to open the disc tray.
2. Press 3 on the remote control.
3. Press AUDIO on the remote control.
Distorted picture
Occasionally, a small amount of picture distortion may appear
depending on the disc being played back. This is not a malfunction.
Check the video connection.
Picture freezes momentarily
during playback
Check the disc for fingerprints/scratches and clean it with a soft cloth
wiping from center to edge.
®
For WMV/DivX , lowering the bit rate may improve the problem.
HD JPEG pictures cannot be
displayed
The disc reading time may exceed 30 seconds.
MP3 music and HD JPEG pictures cannot be played simultaneously.
The screen size looks
unnatural, or the caption is
displayed only partially on the
TV monitor or is not displayed
at all
Check that the TV setting of this unit matches the screen size of your
Change the screen size and the aspect ratio of your TV.
No sound or distorted sound
Adjust the volume.
Check that the speakers are connected correctly.
Check the audio connection.
For MP3/WMA, check that the sampling rate and bit rate are
®
For WMV/DivX , record the file onto your USB device at a lower
bit rate.
No audio at digital output
Check the digital connections.
If you are playing a DTS source, check that your receiver can decode
Check that the audio format of the selected audio language matches
your receiver capabilities.
®
No sound during DivX movie
The audio code may not be supported by this unit.
playback
This unit does not respond to
the remote control
Aim the remote control directly at the remote control sensor on the front
panel.
Reduce the distance of the remote control from this unit.
Replace the batteries in the remote control.
Reinsert the batteries with their polarities (+/– signs) as indicated.
43 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
Buttons do not work
To completely reset this unit, unplug the AC cord from the AC outlet
for 5-10 seconds, plug the AC cord to the AC outlet again, and then turn
on this unit.
This unit does not respond to
some operating commands
during playback
Some operations may not be permitted by the disc. Refer to the
instructions of the disc jacket.
Menu items cannot be selected Press
7
twice on the remote control before selecting the setup menu.
Depending on the disc availability, some menu items cannot be
selected.
Your USB device cannot be
recognized
Check that your USB device is connected correctly.
Some devices may not be used even if they are USB mass storage class
devices.
Set this unit to the standby mode, and then turn it on again.
Disconnect your USB device when this unit is in the standby mode, then
connect it again and turn on this unit.
Connect the AC adapter if the adapter is supplied with your USB
device.
If “Device not supported” appears on the TV screen, check whether
your USB device is supported by this unit (see “Supported USB
If “USB current protection active. Device not supported” appears on the
TV screen, your USB device is not usable with this unit (see “Supported
This unit does not record CD
tracks onto your USB device
Check that your USB device is connected correctly.
Check that your USB device is compatible with this unit.
Tracks protected by SCMS (Serial Copy Management System) are
not recordable.
Copy protected music discs incompatible with CDDA standard are
not recordable.
44 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
This unit stops recording CD
tracks onto your USB device
If “Max files reached” appears on the TV screen, delete any files you do
not need or create a new folder and then move some files to the created
folder so that the number of files on a root directory in your USB device
is reduced. This unit can record up to 648 files on each root directory. In
case the above message appears, press ENTER to cancel the recording.
If “USB full” appears on the TV screen, delete any files you do not need
so that there is enough space in your USB device. In case the above
message appears, press ENTER to cancel the recording.
If “Max tracks reached” appears on the TV screen, rename
“TRACK999” by using PC, etc. or create a new folder and then move
the file to the created folder. In case the above message appears, press
ENTER to cancel the recording.
If “USB device error” appears on the TV screen, check the connection
between this unit and the USB device. In case the above message
appears, press ENTER to cancel the recording.
If “Disc error” appears on the TV screen, check the disc for
fingerprints/scratches and clean it with a soft cloth wiping from center
to edge. In case the above message appears, press ENTER to cancel the
recording.
If “Copy protected” appears on the TV screen, check that the track is
not protected by SCMS (Serial Copy Management System). Tracks
protected by SCMS are not recordable. In case the above message
appears, press ENTER to cancel the recording.
The MP3 file recorded on your
USB device by using “MP3
RECORD” does not play or
stops during playback
If the recording has been canceled, playback stops at the canceled point.
Try recording again.
If “USB full”, “USB device error”, or “Disc error” has appeared on the
TV screen during the recording, created files cannot be played. Refer to
“This unit stops recording CD tracks onto your USB device” to solve
the problem and then try recording again.
The sound of recorded music
on your USB device is low-
quality, skips, or contains
unexpected noise
Check the CD (e.g., sound quality, noise, or fingerprints/scratches).
45 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Glossary
®
■
Analog
■
DivX Ultra
®
Sound that has not been converted into numerical
values. Analog sound varies, while digital sound has
specific numerical values. These jacks send audio
through two channels, the left and right.
DivX Ultra Certified products provide enhanced
playback of advanced media features supported by the
DivX Media Format. Key features include interactive
video menus, subtitles, alternate audio tracks, video
tags, and chapter points.
®
■
Aspect ratio
®
The ratio of vertical and horizontal sizes of a displayed
image. The horizontal vs. vertical ratio of conventional
TVs is 4:3, and that of wide-screens is 16:9.
■
DMF (DivX Media Format)
®
The DivX Media Format supports advanced media
features, adding controls for an interactive media
experience: interactive video menus, chapter points,
multi-language subtitles, and alternate audio tracks.
■
Audio output jacks
Jacks on the back of the DVD player that send audio to
another system (TV, Stereo, etc.).
■
Dolby Digital
A surround sound system developed by Dolby
Laboratories containing up to six channels of digital
audio (front left and right, surround left and right, center
and subwoofer).
■
Bit rate
The amount of data used to hold a given length of
music, measured in kilobits per seconds, or kbps. Or,
the speed at which you record. Generally, the higher the
bit rate, or the higher the recording speed, the better the
sound quality. However, higher bit rates use more space
on a disc.
■
DTS
Digital Theatre Systems. This is a surround sound
system, but it is different from Dolby Digital. The
formats were developed by different companies.
■
Chapter
Sections of a picture or a music piece on a DVD that are
smaller than titles. A title is composed of several
chapters. Each chapter is assigned a chapter number
enabling you to locate the chapter you want.
■
HDCP
HDCP (High-bandwidth Digital Content Protection)
developed by Intel corporation, is a method to encrypt
digital video and audio data for purpose of content
protection. For further information on HDCP, visit the
HDCP website at “www.digital-cp.com”.
■
Component video output jacks
Jacks on the back of the DVD player that send high-
quality video to a TV that has component video input
jacks (R/G/B, Y/PB/PR, etc.).
■
HD JPEG
HD (High-Definition) JPEG provides images in their
enhanced resolution via HDMI connection.
■
Disc menu
A screen display prepared for allowing selection of
images, sounds, subtitles, multi-angles, etc. recorded on
a DVD.
■
HDMI
HDMI (High-Definition Multimedia Interface) is the
first industry-supported, uncompressed, all-digital A/V
(audio/video) interface. Providing an interface between
any A/V source (such as a set-top box or A/V receiver)
and an audio/video monitor (such as a digital television-
DTV), HDMI supports standard, enhanced or high-
definition video as well as multi-channel digital audio
using a single cable. HDMI transmits all ATSC
(Advanced Television Systems Committee) HDTV
standards and supports 8-channel digital audio, with
bandwidth extra to accommodate future enhancements
and requirements.
■
Digital
Sound that has been converted into numerical values.
Digital sound is available when you use the digital
audio output jacks. These jacks send audio through
multiple channels, instead of just two channels as
analog does.
®
■
DivX
®
DivX is a popular media technology created by DivX,
®
Inc. DivX media files contain highly compressed
video with high visual quality that maintains a relatively
When used in combination with HDCP (High-
bandwidth Digital Content Protection), HDMI provides
a secure audio/video interface that meets the security
requirements of content providers and system
operations. For further information on HDMI, visit the
HDMI website at “www.hdmi.org/”.
®
small file size. DivX files can also include advanced
media features like menus, subtitles, and alternate audio
®
tracks. Many DivX media files are available for
download online, and you can create your own using
your personal content and easy-to-use tools from
DivX.com.
46 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
■
Interactive menu
■
Region code
Interactive video menus offer unprecedented
convenience and control so you can quickly navigate
between various scenes or bonus features, and select
from audio track and subtitle options.
A system for allowing discs to be played back only in
the region designated beforehand. This unit will only
play discs that have compatible region codes. You can
find the region code of your unit by looking on the
product label. Some discs are compatible with more
than one region (or ALL regions).
■
JPEG
A very common digital still picture format. A still-
picture data compression system proposed by the Joint
Photographic Expert Group, which features small
decrease in image quality in spite of its high
compression ratio.
■
S-video
Produces a clear picture by sending separate signals for
the luminance and the color. You can use S-video only
if your TV has S-video input jack.
■
MP3
■
Surround
A file format with a sound data compression system.
“MP3” is the abbreviation of Motion Picture Experts
Group 1 (or MPEG-1) Audio Layer 3. By using MP3
format, one CD-R or CD-RW can contain about ten
times as much data as a regular CD can.
A system for creating realistic three dimensional sound
fields full of realism by arranging multiple speakers
around the listener.
■
Title
The longest section of a picture or music feature on
DVD, music, etc., in video software, or the entire album
in audio software. Each title is assigned a title number
enabling you to locate the title you want.
■
Parental control
A function of the DVD to limit playback of the disc by
the age of the users according to the limitation level in
each country. The limitation varies from disc to disc;
when it is activated, playback will be prohibited if the
software’s level is higher than the user-set level.
■
Video output jack
Jack on the back of the DVD player that sends video to
a TV.
■
PCM (Pulse Code Modulation)
■
VR (Video Recording) format
A system for converting analog sound signals to digital
signals for later processing, with no data compression
used in conversion.
A format which enables you to create a DVD disc that
can be extensively re-edited.
■
Playback control (PBC)
Refers to the signal recorded on video CDs or SVCDs
for controlling reproduction. By using menu screens
recorded on a Video CD or SVCD that supports PBC,
you can enjoy interactive-type software as well as
software having a search function.
■
Play list
A list of selected titles to be played back in a specific
order. This option is only available with VR format and
must be created beforehand.
■
Progressive scan
It displays all the horizontal lines of a picture at one
time, as a signal frame. This system can convert the
interlaced video from DVD into progressive format for
connection to a progressive display. It dramatically
increases the vertical resolution.
47 En
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
PLAYABLE DISC FORMATS
TV STANDARD
• DVD-Video
• Number of lines .............................PAL: 625, NTSC: 525
• Vertical frequency...................PAL: 50 Hz, NTSC: 60 Hz
• Playback...............................Multi-standard (PAL/NTSC)
• DVD-R, DVD-RW, DVD-R DL
• DVD+R, DVD+RW, DVD+R DL
• Video CD, SVCD
• CD
• PICTURE CD
CONNECTIONS
• Video output ..............................RCA/Phono x 1 (yellow)
• S-video output.................................. Mini DIN, 4 pins x 1
• Component video output
• CD-R, CD-RW
• MP3 (ISO 9660)
fs 32, 44.1, 48 kHz......................................96-320 kbps
Y output....................................RCA/Phono x 1 (green)
PB/CB (PB) output........................RCA/Phono x 1 (blue)
PR/CR (PR) output..........................RCA/Phono x 1 (red)
• SCART (Europe and Russia models only)
............................................................. Euroconnector x 1
• Audio output (L+R) ....... RCA/Phono x 1 pair (white/red)
• Digital output
• WMA
fs 44.1 kHz..................................................64-192 kbps
fs 48 kHz...................................................128-192 kbps
• WMV ..........................720 x 480/720 x 576 pixels or less
®
• DivX
• JPEG.........................................3072 x 2048 pixels or less
Coaxial.................................................. RCA/Phono x 1
(IEC60958 for CDDA, LPCM /
VIDEO PERFORMANCE
IEC61937 for Dolby Digital, DTS)
HDMI............................................................Type A x 1
• USB..................................................................Type A x 1
• Remote Control
• Video (CVBS) output...........................1 Vpp into 75 ohm
• S-Video output ................................Y: 1 Vpp into 75 ohm
C: 0.3 Vpp into 75 ohm
• Component video output.................Y: 1 Vpp into 75 ohm
PB/CB (PB), PR/CR (PR): 0.7 Vpp into 75 ohm
Input........................................... 3.5 mm mini jack x 1
Output........................................ 3.5 mm mini jack x 1
• RGB (Scart) output (Europe and Russia models only)
......................................................Y: 0.7 Vpp into 75 ohm
CABINET
AUDIO FORMAT
• Dimensions (W x D x H)....................435 x 310 x 51 mm
(17-1/8 x 12-3/16 x 2 in)
• Weight...................................Approx. 2.6 kg (5 lbs 12 oz)
• Digital
Dolby Digital, DTS..........................Compressed digital
PCM......................... fs 44.1, 48, 96 kHz/16, 20, 24 bits
• Analog sound ...........................................................Stereo
POWER SUPPLY
• Power inlet
AUDIO PERFORMANCE
U.S.A. and Canada models.................AC 120 V, 60 Hz
Europe and Russia models..................AC 230 V, 50 Hz
Asia, and Central and South America models
• DA Converter............................................................24 bit
• Signal-Noise (1 kHz) ............................................. 105 dB
• Dynamic range (1 kHz)............................................ 97 dB
• DVD..... fs 96 kHz, 2 Hz-44 kHz/fs 48 kHz, 2 Hz-22 kHz
• SVCD..........................................fs 48 kHz, 2 Hz-22 kHz/
fs 44.1 kHz, 2 Hz-20 kHz
.......................................AC 110-240 V, 50 Hz/60 Hz
Australia model............................AC 230-240 V, 50 Hz
Korea model ................................AC 110-240 V, 60 Hz
• Power consumption.....................................Approx. 16 W
• Standby power consumption.......................Less than 1 W
• CD, VCD...................................fs 44.1 kHz, 2 Hz-20 kHz
• Distortion and Noise (1 kHz).............................. 0.0035%
LASER
Type
Wave length
Semiconductor laser GaAs/GaAlAs
650 nm (DVD)
MULTIMEDIA APPLICATIONS
780 nm (VCD/CD)
7 mW (DVD)
10 mW (VCD/CD)
• Connections...................... USB mass storage class device
• Playback formats (USB device)
Output Power
MP3............................. fs 32, 44.1, 48 kHz/96-320 kbps
WMA.......................................... fs 44.1 kHz/64-192 kbps,
fs 48 kHz/128-192 kbps
Beam divergence 60 degrees
WMV .......................720 x 480/720 x 576 pixels or less
DivX
JPEG .....................................3072 x 2048 pixels or less
Specifications are subject to change without prior
notice.
®
48 En
Download from Www.Somanuals.com. All Manuals Search And Download.
3139 245 30151
©2008 Yamaha Corporation All rights reserved.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|